Mono Bx OVEN Specifications

Enter Serial No. here
MANUAL No.Y-BX-25UL
In the event of an enquiry please quote this serial number.
OPERATING AND MAINTENANCE MANUAL
BX-DD SMARTBAKE OVEN
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
1
APPROVED TO ANSI/UL 197
9th EDITION 2003
WARNING LABEL, TO REDUCE RISK OF FIRE
OR ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE
REPAIR SHOULD BE DONE BY AUTHORIZED PERSONNEL ONLY
Failure to follow the cleaning and maintenance
instructions detailed in this owners manual could affect
the warranty of this oven.
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
2
CONTENTS
PAGE
4
PART 1.0
Introduction.
5
PART 2.0
Dimensions.
6
PART 3.0
Specifications.
7
PART 4.0
Safety.
8
PART 5.0
Installation.
10
PART 6.0
Isolation.
7
PART 7.0
Daily Cleaning.
8
PART 8.0
Weekly Cleaning.
14
PART 9.0
SMARTBAKE operating instructions
19
PART 10.0
SMARTBAKE programming instructions.
22
PART 11.0
Using ”MONOLINK 6” programming software.
27
PART 12.0
Light bulb Replacement.
28
PART 13.0
Replacement parts list.
30
PART 14.0
Electrical information.
(using a laptop for recipe programs)
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
3
1.0 INTRODUCTION
The BX-DD Smartbake oven is a computerised, compact, electric convection oven with
steam capability and a capacity of three 26” x 18” trays.
The oven is constructed of stainless steel and features the state of the art smartbake
controller with color display and 99 programmable recipes each with up to six steps in
which the bake time, temperature, steam time, fan and vent can be controlled.
Designed to be stackable, without the requirement for a separate support.
The high-speed fan and ring element provides efficient air circulation and an even bake
across a range of products
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
4
2.0 DIMENSIONS
EACH OVEN:
Height:
Depth, door closed:
Width:
20.75"
46"
34"
2" (50mm) clearance is required at the back and sides of the oven to allow adequate
circulation of air.
Net weight (1 oven) 370 lbs
Net weight (Short stand) 145 lbs
Net weight (Tall stand) 206 lbs
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
5
3.0 SPECIFICATIONS
EACH OVEN:
Total Power:
7.5 kW.
Electric:
208V/220V Three phase + Neutral + Ground; 60Hz.
24Amps per phase.
Supply Cable:
6 feet of cable with L21-30 plug supplied.
Loading:
7kW Ring element
Fan Drive:
Direct to motor
Tray Size:
26” x 18”
Tray Capacity:
3.
Damper:
Butterfly type.
Noise Level:
Less than 85dB.
Water Supply:
20 PSI Cold water.
For proper operation of the steam system it is recommended that the water
supply follows the following specifications:
Hardness
0-12 grains per gallon
PH range
6.7 to 7.4
Chloride concentration
0 –40 ppm
TDS
50 – 250 ppm
Sodium
0 – 40 ppm
Chlorine
0 ppm
Alkalinity
0 – 150 ppm
Consult your water treatment company for proper water filtration system
information.
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
6
4.0 SAFETY
To safely use this convection oven, read this owners manual completely and follow
these warnings and the other warnings in this manual while operating the oven.
•
The oven is designed for the baking of bread, confectionery and savoury products.
Do not use it for baking other items without first consulting Adamatic.
•
All repairs and maintenance of electrical units must only be carried out by an
authorized Adamatic service technician.
•
Electrical access panels must not be opened unless the oven power cord is
unplugged.
•
All connections to the oven must be made in accordance with all National, State,
and local codes and regulations.
•
While the oven is in operation, and for some time after use, DO NOT TOUCH the
oven window and surrounding area as these surfaces may be hot.
•
The oven must be operated as described in this manual.
•
Use only original manufacturer spare parts on the oven.
•
The construction of the oven must not be changed or altered.
•
The owner of the oven is legally obligated to instruct staff using the oven in its
operation and in these safety regulations. The instructions must be readily
accessible for the operator.
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
7
5.0 INSTALLATION
Water Supply;
It is the customer’s responsibility to provide an appropriate water treatment system
that will supply water that meets the water specification listed on page 6.
The supply must be provided with a shut-off valve, pressure reduction valve and
pressure gauge.
NOTE
A RUBBER WASHER SHOULD BE
FITTED TO ENSURE A FULL SEAL
WITH WATER SUPPLY.
(Part Number A900-05-261)
• Ambient temperatures : Maintain ambient temperatures below 115° F (40° C) around the oven.
• Clearance:
Provide 2” (50mm) clearance at the back and sides of this oven and 10” clearance at the
top to allow adequate air circulation.
• Initial Cleaning:
Carefully wipe the interior and exterior of the oven thoroughly with a clean cloth soaked
in warm soapy water before using the oven for the first time.
• Before use:
Fix top sealing ring M189-01-02000 over top pipe with silicone sealant as seen in the
illustration for stacking ovens on the next page.
If a stand is used under the oven, it must be attached by two brackets M189-05-00900
(one each side) at the rear.
CLAMPING BRACKET
M189-05-00900
LEFT SIDE
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
CLAMPING BRACKET
M189-05-00900
RIGHT SIDE
5-08 RAC
8
• Stacking two ovens
1. Position ovens one on top of the other.
2. Remove both ovens rear covers.
Or
Remove front control panels (complete with electrics and cables) and work from the front
of the ovens.
3. Remove blanking plate (fixed with silicone sealant) from damper tube of upper oven.
4. Fit end of flexible ducting over top damper tube and attach to lower oven damper tube. Use
silicone sealant and worm drive clips to fasten in position.
5. Replace both ovens rear covers and fix ovens together using clamping bracket M189-0500900. (One each side at the rear.)
6. Fix bottom oven to stand using clamping bracket M189-05-00900. (One each side at the
rear.)
7. Fix top sealing ring M189-01-02000 over top pipe with silicone sealant.
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
9
6.0 ISOLATION
To stop the oven in an emergency,
Unplug the oven from the outlet.
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
10
7.0 DAILY CLEANING INSTRUCTIONS
NOTE: UNPLUG THE OVEN FROM OUTLET AND ALLOW TO COOL COMPLETELY
BEFORE CLEANING
•
The equipment is to be cleaned daily using approved chloride – free cleaners.
•
NEVER USE STEEL WOOL TO CLEAN OVEN.
•
Sweep any debris (after it has been allowed to cool) from oven interior surfaces onto
oven removable catch tray and remove for cleaning.
•
Wipe oven front, back and sides using a damp cloth that has been soaked in a
solution of mild detergent and hot water
IMPORTANT
1) NEVER SPRAY THE OVEN DOWN WITH A HOSE.
2) TO AVOID ELECTROCUTION OR OVEN DAMAGE –NEVER ALLOW WATER, STEAM,
CLEANING SOLUTION, OR OTHER LIQUIDS TO ENTER THE ELECTRICAL PANELS
OR CONNECTIONS.
3) DO NOT REMOVE THE REAR PANEL INSIDE THE OVEN.THIS ALLOWS ACCESS TO
THE FAN ASSEMBLY AND COULD CAUSE INJURY.
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
11
8.0 WEEKLY CLEANING INSTRUCTIONS
NOTE:
•
BEFORE CLEANING UNPLUG THE OVEN FROM OUTLET
AND ALLOW TO COOL COMPLETELY
Complete daily check then:
The inner door glass is hinged to enable cleaning of internal surfaces. To open, remove
the two screws shown below. The internal surfaces of the door glass can then be
cleaned using a suitable glass cleaner.
Remove these screws
to release inner glass
for cleaning
•
Remove interior side panels by removing three screws in front of oven and sliding side
panels out of the door. Clean side panels and interior surfaces with mild detergent and
hot water using a nylon cleaning brush.
Carefully install interior side panels by aligning tabs in rear of panel with slots in the rear
panel. Align holes in front of interior side panel with nutsert in sides of oven and secure
with three screws.
SLOTS
SCREWS
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
12
IMPORTANT:
1) WHEN CLEANING INSIDE OVEN, CARE MUST BE TAKEN NOT TO DAMAGE
TEMPERATURE PROBE PROTRUDING FROM UPPER CORNER OF CHAMBER
REAR WALL. (SEE BELOW)
2)
TO AVOID ELECTROCUTION OR OVEN DAMAGE –NEVER ALLOW WATER,
STEAM, CLEANING SOLUTION, OR OTHER LIQUIDS TO ENTER THE
ELECTRICAL PANELS OR CONNECTIONS.
3)
DO NOT REMOVE THE REAR PANEL INSIDE THE OVEN.THIS ALLOWS ACCESS
TO THE FAN ASSEMBLY AND COULD CAUSE INJURY.
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
13
9.0
SMARTBAKE OPERATING INSTRUCTIONS
PRODUCT NUMBER
PRODUCT NAME
FAN DWELL
1,2 OR 3
PAN LOAD
ACTIVE
PROGRAM
STEP
INDICATOR
TURN PAN
TIMER
TEMPERATURE
GRAPH
OVEN
TEMPERATURE
BAKE TIME
GRAPH
BAKE TIME LEFT
CONTROL
BUTTONS
STOP
BUTTON
MAIN
POWER
BUTTON
Smartbake Control Panel
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
14
1. Connect water ensuring there are no leaks.
2. Plug oven into appropriate wall outlet.
3. Turn oven on by pressing green main power button, and the following screen (fig 1) will
appear: -
Fig 1
4. Press control button (4) under select product icon and program list appears (see fig 2).
Fig 2
5. Highlight the desired program by pressing control button (2) under the scroll down icon
or control button (3) under the scroll up icon.
NOTE.
Pressing control button (5) will scroll down an entire screen and control button (6) will scroll
up an entire screen.
6. Select the highlighted product by pressing control button 4 under the enter icon.
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
15
7. Choose 1, 2 or 3 pan capacity by pressing the appropriate control button
under the icon and oven will start to preheat. (Fig3)
Fig 3
To stop heating press stop button at any time.
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
16
8. When oven is ready it will beep three times and the following screen will appear (fig 4).
Load product and press control button (4) under the start icon
Fig 4
9. If a turn pan time has been programmed, a buzzer will sound when the timer reaches 0.
Open the door, remove tray and turn around then replace it back in the oven.
Close the door to silence the buzzer and continue the bake cycle.
10. At the end of bake time, buzzer will sound, and (fig 5) will be displayed.
Open door and check product.
If done remove product, close door and press the stop button.
OR
If more time is needed, press key 4 under +1 min icon to increase bake by 1 minute
increments
(-1 min button allows a decrease in time setting if too much is entered)
(press stop at any time to stop bake)
Fig 5
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
17
11.
This will now take you back to program list screen (Fig 2, Page 15).
12.
To bake in pre-heated oven, repeat from step 5.
NOTE: During heating (1) can be pressed at any time to check settings. (Press (1) or
wait 10 seconds to return to previous screen).
1
Until oven is up to temperature the display will show “ HEATING”.
When correct temperature is reached display will show “READY”.
The oven will keep to set temperature until bake is started.
Oven will keep up to temperature of last product baked or new item on program
list if chosen.
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
18
10.0 SMARTBAKE PROGRAMMING INSTRUCTIONS
STOP
BUTTON
BUTTONS USED TO PROGRAM OVEN WITHOUT USING A COMPUTER CONNECTION
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
19
1.
Press stop to get to first screen Fig 6
Fig 6
2.
Press and hold button 2 for 5 seconds for pass code screen Fig 7.
Fig 7
3.
Enter pass code (default 111111). Fig 8 will appear.
Fig 8
4.
Use scroll buttons to highlight the required product. Press enter.
All parameters can now be set.
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
20
The oven is capable of six different phases per bake and if a lower number is required,
bake time can be left at “0” to leave that phase inoperative.
To move across the screen press (4)
To move back press (1)
To increase value of parameter press (3)
To decrease value of parameter press (2)
POWER FAN LEVELS
TEMPERATURE
BAKE DURATION
(minutes)
TURN TIME
(minutes)
STEAM DURATION
(seconds)
FAN CYCLES
FAN DWELL
(seconds)
DAMPER DELAY
(from start of bake phase)
PROGRAM TITLE
Press (6) to go up alphabet, press (5) to go down alphabet. After each letter has been
chosen press (4) to go to next position. If a mistake is made, pressing (1) will go back to
previous position.
WHEN ALL PARAMETERS ARE COMPLETE PRESS STOP BUTTON THREE TIMES
TO SAVE THE SETTINGS. REPEAT FOR EACH PROGRAM REQUIRED.
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
21
PROGRAMMING INSTRUCTIONS
(UPLOAD/DOWNLOAD)
USING “MONOLINK 6” SOFTWARE
11.0
SETTING UP THE CONNECTION
1. Ensure that “MONOLINK 6” is installed on your computer and the oven is showing the
start screen (Dunkin Donut logo)
2. Connect oven to the computer using a null modem cable
A
as shown below.
(2 X 9 WAY D-TYPE CONNECTOR – BOTH FEMALE)
A
NULL MODEM CABLE
(2 X 9 WAY D-TYPE CONNECTOR – BOTH
B
USB – SERIAL ADAPTOR WILL BE NEEDED IF A
SERIAL PORT IS NOT AVAILABLE ON THE
COMPUTER BEING USED.
LOOK FOR SOCKET ON THE SIDE OF THE OVEN
CONTROL PANEL. REMOVE PLASTIC COVER TO
EXPOSE THE CONNECTIONS.
A
SERIAL TO SERIAL CONNECTION
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
A
B
SERIAL TO USB CONNECTION
5-08 RAC
22
SETTING UP THE PROGRAM
1. Start “MONOLINK 6” on the computer.
2. Go to “configure / units” and ensure that “Degrees Fahrenheit” is ticked.
3. Go to “configure / oven” and ensure that “Rainbow Dunkin Donuts” is ticked.
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
23
TO CHANGE A PROGRAM
1. Go to “file / open”
2. Find the file required, highlight it and click on “open”
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
24
3. Highlight the product to change
4. Remember to choose 1 pan, 2 pan, or 3 pan, then click on the information to be changed.
Enter the new number and press return.
5. Go to “file/save” to save the changes or “file /save as” to save as a different file.
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
25
TO DOWNLOAD PROGRAM TO OVEN
1. Ensure the computer is connected to the oven and the correct program is loaded on
the screen, then go to “Communications/Download recipes (to oven)”
The oven will show a counter (up to 99) in the corner of the screen
which will disappear when the download is complete.
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
26
12.0
LIGHT BULB REPLACEMENT
14.0
B REPLACEMENT
Replacement bulb part number B772-94-001
In the event of a bulb failure, Instructions on how to change a bulb are as follows: •
Unplug oven from wall outlet and allow oven to cool completely.
•
Remove screws (4 per light) and take glass, frame and gasket off lamp unit.
SCREWS
•
Remove bulb by unscrewing in direction of arrow and replace with new bulb.
GASKET
Pt No.B721-67-008
GLASS AND FRAME
Pt No.B721-67-010
Pt No.B721-67-009
•
Refit glass front taking care that gasket is in position around stainless steel
frame.
•
Re-connect oven and test.
NOTE:
Bulbs can be ordered from Adamatic as part number B772-94-001
or
sourced locally as 125v 25w SES oven bulb (300deg C)
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
27
13.0
REPLACEMENT PARTS
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
28
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
29
DOOR SEAL
OUTER DOOR GLASS
INNER DOOR GLASS
HANDEL
BLUE WATER HOSE
WATER INLET ASSY
DRIP TRAY
TRAY RUNNER RH
TRAY RUNNER LH
MECHANICAL PARTS
M159-03-01500
M159-03-11000
M159-03-20800
A900-27-118
A900-34-087
M158-17-00300
M205-12-00500
M189-01-01400
M189-01-01401
14.0
ELECTRICAL INFORMATION
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
30
208V – 220V 60Hz , 3PH + NEUTRAL + GROUND and 120v 1PHASE + N + GROUND
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
31
CONTROL PANEL WIRING DIAGRAM
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
32
CONTROL PANEL OUTPUT SCHEMATIC
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
33
110V WIRING SCHEMATIC
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
34
208V WIRING SCHEMATIC
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
35
BLOWER MOTOR: HEATING ELEMENT WIRING DIAGRAM
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
36
814 44th Street NW
Suite 103
Auburn, WA 98001
U.S.A.
Tel. 800.526.2807
Fax: 732-544-0735
Web: www.adamatic.com
Email: info@adamatic.com
FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut full JKleva edit5
known as smartbake in USA
5-08 RAC
37