Boss Audio Systems PH2.1300 Service manual

DCR-TRV255E/TRV260/TRV265/TRV265E
RMT-830
SERVICE MANUAL
US Model
Canadian Model
Ver 1.0 2003. 11
DCR-TRV260
Revision History
AEP Model
UK Model
East European Model
North European Model
How to use
Acrobat Reader
DCR-TRV255E/TRV265E
E Model
DCR-TRV260/TRV265/TRV265E
Australian Model
DCR-TRV265E
M2200 MECHANISM
Tourist Model
DCR-TRV265/TRV265E
Photo: DCR-TRV265
Link
SPECIFICATIONS
BLOCK DIAGRAMS
PRINTED WIRING BOARDS
SERVICE NOTE
FRAME SCHEMATIC DIAGRAMS
REPAIR PARTS LIST
DISASSEMBLY
SCHEMATIC DIAGRAMS
NTSC MODEL: DCR-TRV260/TRV265
PAL MODEL: DCR-TRV255E/TRV265E
• For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (987629251.pdf).
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (987629241.pdf).
• For MECHANISM ADJUSTMENTS, refer to the “8mm Video MECHANICAL ADJUSTMENT MANUAL IX
M2000 MECHANISM ” (9-929-861-11).
• Reference No. search on printed wiring boards is available.
• Table for differences of function of each model.
• TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT)
• When the machine needs to be repaired, make sure to follow the items of “LCD TYPE CHECK”.
• Changing the data is needs when IC4501 is replaced, make sure to follow the items of “CHANGE OF IC4501”.
• HELP: Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
VIDEO CAMERA RECORDER
DCR-TRV255E/TRV260/TRV265/TRV265E
TM
SERIES
SPECIFICATIONS
Video camera recorder
System
Video recording system
2 rotary heads, Helical scanning system
Audio recording system
Rotary heads, PCM system
Quantization: 12 bits (Fs 32 kHz, stereo 1,
stereo 2), 16 bits (Fs 48 kHz, stereo)
Video signal
DCR-TRV260/265:
NTSC color, EIA standards
DCR-TRV255E/265E:
PAL color, CCIR standards
Usable cassette
8 mm video format cassette
Tape speed
DCR-TRV260/265:
SP: Approx. 28.67 mm/s
LP: Approx. 19.11 mm/s
DCR-TRV255E/265E:
SP: Approx. 28.70 mm/s
LP: Approx. 19.13 mm/s
Recording/playback time
DCR-TRV260/265:
(using 120 min. Digital8 video cassette)
DCR-TRV255E/265E:
(using 90 min. Digital8 video cassette)
SP: 1 h
LP: 1 h 30 min
Fast forward/rewind time
DCR-TRV260/265:
(using 120 min. Digital8 video cassette)
DCR-TRV255E/265E:
(using 90 min. Digital8 video cassette)
Approx. 5 min
Viewfinder
Electric viewfinder (monochrome)
Image device
3.0 mm (1/6 type) CCD (Charge Coupled
Device)
DCR-TRV260/265:
Gross: Approx. 460 000 pixels
Effective: Approx. 290 000 pixels
DCR-TRV255E/265E:
Gross: Approx. 540 000 pixels
Effective: Approx. 350 000 pixels
Lens
Combined power zoom lens
Filter diameter: 37 mm (1 1/2 in.)
20 × (Optical), 990 × (Digital)
F=1.6 - 2.4
Focal length
2.5 - 50 mm (1/8 - 2 in.)
When converted to a 35 mm still camera
42 - 840 mm (1 11/16 - 33 1/8 in.)
Color temperature
Auto
Minimum illumination
4 lx (lux) (F 1.6)
0 lx (lux) (in the NightShot plus mode)*
* Objects unable to be seen due to the dark can be
shot with infrared lighting.
Input/Output connectors
S video output
4-pin mini DIN
Luminance signal: 1 Vp-p, 75 Ω (ohms),
unbalanced
Chrominance signal:
DCR-TRV260/265: 0.286 Vp-p
DCR-TRV255E/265E: 0.3 Vp-p
75 Ω (ohms), unbalanced
Audio/Video output
AV MINIJAC K
Video signal: 1 Vp-p, 75 Ω: (ohms),
unbalanced, sync negative
Audio signal: 327 mV (at output impedance
more than 47 kΩ: (kilohms)), Output
impedance with less than 2.2 kΩ: (kilohms)
Stereo minijack (ø 3.5 mm)
DV input/output
DCR-TRV260/265/265E:
4-pin connector
DV output
DCR-TRV255E:
4-pin connector
USB jack
mini-B
LCD screen
Picture
6.2 cm (2.5 type)
Total dot number
123 200 (560 × 220)
General
Power requirements
DC 7.2 V (battery pack)
DC 8.4 V (AC Adaptor)
Average power consumption (when using the
battery pack)
During camera recording using viewfinder
2.5 W
During camera recording using LCD
3.4 W
Operating temperature
0°C to 40°C (32°F to 104°F)
Storage temperature
-20°C to + 60°C (-4°F to + 140°F)
Dimensions (approx.)
85 × 98 × 151 mm (3 3/8 × 3 7/8 × 6 in.) (w/h/
d)
Mass (Approx.)
780 g (1 lb 11 oz) main unit only
890 g (1 lb 15 oz) including the
NP-FM30 rechargeable battery pack, Digital8
cassette, lens cap, and shoulder strap
Supplied accessories
AC Adaptor (1)
Power cord (1)
Lens cap (1)
Shoulder strap (1)
Wireless Remote Commander (1)
RMT-830: (DCR-TRV265/265E)
A/V connecting cable (1)
USB cable (1)
Rechargeable battery pack NP-FM30 (1)
CD-ROM “SPVD-012 USB Driver” (1)
—2—
21-pin adaptor (1)
: (AEP, UK, EE, NE)
Camera Operating Guide (1)
Computer Application Guide (1)
See page 5-22.
AC Adaptor AC-L15A/L15B
Power requirements
AC 100 - 240 V, 50/60 Hz
Current consumption
0.35 - 0.18 A
Power consumption
18 W
Output voltage
DC 8.4 V, 1.5 A
Operating temperature
0°C to 40°C (32°F to 104°F)
Storage temperature
-20°C to + 60°C (-4°F to + 140°F)
Dimensions (approx.)
56 × 31 × 100 mm (2 1/4 × 1 1/4 × 4 in.) (w/h/
d) excluding the projecting parts
Mass (approx.)
190 g (6.7 oz) excluding the mains lead
Rechargeable battery pack (NP-FM30)
Maximum output voltage
DC 8.4 V
Output voltage
DC 7.2 V
Capacity
5.0 Wh (700 mAh)
Dimensions (approx.)
38.2 × 20.5 × 55.6 mm
(1 9/16 × 13/16 × 2 1/4 in.) (w/h/d)
Mass (approx.)
65 g (2.3 oz)
Operating temperature
0°C to 40°C (32°F to 104°F)
Type
Lithium ion
Design and specifications are subject to change
without notice
DCR-TRV255E/TRV260/TRV265/TRV265E
Table for differences of function
Model
Destination
DCR-TRV255E
DCR-TRV260
DCR-TRV265
AEP, UK, EE, NE
US, CND, E
E, JE
✕
PAL
✕
NTSC
a
NTSC
a
PAL
✕
DV OUT
a
DV IN/OUT
a
DV IN/OUT
a
DV IN/OUT
Remote commander
Color system
VTR Rec
DV interface
LCD type
DCR-TRV265E
AEP, UK, EE, NE,
E, AUS, JE
Remark
a: with REC button
Please refer to page 1-3 to discriminate the type of LCD (TYPE C or TYPE S).
• Abbreviation
AUS : Australian model
CND : Canadian model
EE : East European model
JE : Tourist model
NE : North European model
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
1.
2.
3.
4.
5.
6.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
Check the B+ voltage to see it is at the values specified.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
—3—
DCR-TRV255E/TRV260/TRV265/TRV265E
TABLE OF CONTENTS
Section
1.
Title
Page
SERVICE NOTE
Section
5.
1-1. Note for Repair ································································ 1-1
1-2. Power Supply During Repairs ········································· 1-1
1-3. To Take Out a Cassette when not Eject (Force Eject) ····· 1-2
1-4. LCD Type Check ····························································· 1-3
1-5. Self-diagnosis Function ··················································· 1-4
1-5-1. Self-diagnosis Function ··················································· 1-4
1-5-2. Self-diagnosis Display ····················································· 1-4
1-5-3. Service Mode Display ····················································· 1-4
1-5-4. Self-diagnosis Code Table ··············································· 1-5
1-6. Change of IC4501 ··························································· 1-6
2.
DISASSEMBLY
2-1.
2-2.
2-3.
2-4.
2-5.
Flow Chart ······································································· 2-1
Mechanism Deck Service Position ·································· 2-3
LCD Service Position ······················································ 2-5
Circuit Boards Location ·················································· 2-6
Flexible Boards Location ················································ 2-7
3.
BLOCK DIAGRAMS
3-1.
3-2.
3-3.
3-4.
3-5.
3-6.
3-7.
Overall Block Diagram (1/5) ··········································· 3-1
Overall Block Diagram (2/5) ··········································· 3-3
Overall Block Diagram (3/5) ··········································· 3-5
Overall Block Diagram (4/5) ··········································· 3-7
Overall Block Diagram (5/5) ··········································· 3-9
Power Block Diagram (1/2) ··········································· 3-11
Power Block Diagram (2/2) ··········································· 3-13
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
Title
Page
REPAIR PARTS LIST
5-1.
Exploded Views ···························································· 5-2
5-1-1. Overall Assembly ·························································· 5-2
5-1-2. Front Panel Block ························································· 5-3
5-1-3. Lens Block ···································································· 5-4
5-1-4. LCD Block ···································································· 5-5
5-1-5. Cabinet R Block ···························································· 5-6
5-1-6. EVF Block ···································································· 5-7
5-1-7. Battery Panel Block ······················································ 5-8
5-1-8. MD Frame Block ·························································· 5-9
5-1-9. Cassette Compartment Assembly, Drum Assembly ··· 5-10
5-1-10. LS Chassis Block Assembly ······································· 5-11
5-1-11. Mechanical Chassis Block Assembly-1 ······················ 5-12
5-1-12. Mechanical Chassis Block Assembly-2 ······················ 5-13
5-2.
Electrical Parts List ····················································· 5-14
4-1. Frame Schematic Diagram ·············································· 4-1
4-2. Schematic Diagrams ························································ 4-5
CD-471 (CCD IMAGER) ················································ 4-7
VC-344 (1/10)
(A/D CONVERTER, TIMING GENERATOR) ·············· 4-9
VC-344 (2/10)
(DV SIGNAL PROCESS, LENS CONTROL,
STEADYSHOT, DV INTERFACE, VIDEO OUT) ······ 4-11
VC-344 (3/10) (LENS DRIVE) ···································· 4-13
VC-344 (4/10) (REC/PB AMP) ···································· 4-15
VC-344 (5/10) (SERVO) ··············································· 4-17
VC-344 (6/10) (CAMERA/MECHA CONTROL) ······· 4-19
VC-344 (7/10) (HI CONTROL) ···································· 4-21
VC-344 (8/10) (AUDIO PROCESS) ····························· 4-23
VC-344 (9/10) (DC CONTROL) ·································· 4-25
VC-344 (10/10) (CONNECTOR) ································· 4-27
PD-204 (LCD DRIVER, BACKLIGHT DRIVE) ········· 4-29
SI-041 (JACK) ······························································· 4-31
FP-792 FLEXIBLE ······················································· 4-31
FP-228, FP-299, FP-300, FP-301, FP-302, FP-802
FLEXIBLE ···································································· 4-33
SS-5100, PR-5100 (CONTROL KEY BLOCK) ··········· 4-34
CF-5100 (CONTROL KEY BLOCK) ··························· 4-35
4-3. Printed Wiring Boards ··················································· 4-39
CD-471 ·········································································· 4-41
VC-344 ·········································································· 4-43
PD-204 ··········································································· 4-47
SI-041, FP-792 FLEXIBLE ·········································· 4-49
FP-228, FP-299, FP-300, FP-301, FP-302, FP-802
FLEXIBLE ···································································· 4-51
4-4. Mounted Parts Location ················································ 4-53
—4—
DCR-TRV255E/TRV260/TRV265/TRV265E
SECTION 1
SERVICE NOTE
1-1. NOTE FOR REPAIR
Make sure that the flat cable and flexible board are not cracked of
bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
When remove a connector, don’t pull at wire of connector.
It is possible that a wire is snapped.
When installing a connector, don’t press down at wire of connector.
It is possible that a wire is snapped.
Cut and remove the part of gilt
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
1-2. POWER SUPPLY DURING REPAIRS
In this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4V), the power is shut off so
that the unit cannot operate.
The following method is available to prevent this.
Method 1.
Use the AC power adaptor (AC-L10, AC-VQ800 etc.).
1-1
DCR-TRV255E/TRV260/TRV265/TRV265E
1-3. TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT)
1 Refer to “SECTION 2. DISASSEMBLY” to remove the mechanism deck block.
2 Disconnect CN2401 (2P) of VC-344 board.
3 Add +5V from the DC POWER SUPPLY and unload with a pressing the cassette compartment.
4 Pull the timing belt in the direction of
arrow A with a pincette while pressing
the cassette compartment (take care
not to damage) to adjust the bending
of a tape.
Press the cassette compartment not to
rise the cassette compartment
Pincette
A
[DC power supply]
(+5V)
Timing belt
5 Let go your hold the cassette
compartment and rise the cassette
compartment to take out a cassette.
A
Loading motor
Disconnect CN2401
of VC-344 board.
Adjust the bending of a tape
Timing belt
1-2
DCR-TRV255E/TRV260/TRV265/TRV265E
1-4. LCD TYPE CHECK
The LCD type can be checked with data value by connecting the adjustment remote commander.
Note: About PD-204 board and LCD module, discriminate LCD type on the machine, and replace the same type.
Preparations:
1) Connect the equipment for adjustments according to Fig. 1.
2) Connect the adjustment remote commander to VC-344 board CN1011 via I/F unit for LANC control (J-6082-521-A) and CPC jig
connector (J-6082-539-A).
To operate the adjustment remote commander, connect the AC power adaptor to the DC IN jack of I/F unit for LANC control, or connect
the L series Info-LITHIUM battery to the battery terminal of I/F unit for LANC control.
Checking method:
1) Select page: 3, address: CC.
2) By checking the data value of display data, the type of LCD can be discriminated.
Data
LCD type
64 to 67
TYPE C
40 to 43
TYPE S
CN1011
1
16
CPC lid
Screw (M2)
L serices Info
LITHIUM battery (7.2Vdc)
AC adaptor
AC IN
AC adaptor
Conductor side
LANC jack
Adjustment
remote commander (RM-95)
CPC jig connector
(J-6082-539-A)
I/F unit for LANC control
(J-6082-521-A)
1-3
AC IN
DCR-TRV255E/TRV260/TRV265/TRV265E
1-5. SELF-DIAGNOSIS FUNCTION
1-5-1. Self-diagnosis Function
1-5-2. Self-diagnosis Display
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the viewfinder or Display
window what to do. This function consists of two display; selfdiagnosis display and service mode display.
Details of the self-diagnosis functions are provided in the Instruction
manual.
When problems occur while the unit is operating, the counter of the
viewfinder or Display window shows a 4-digit display consisting
of an alphabet and numbers, which blinks at 3.2 Hz. This 5-character
display indicates the “repaired by:”, “block” in which the problem
occurred, and “detailed code” of the problem.
Viewfinder
Display window
C : 3 1 : 11
C:31:11
Blinks at 3.2Hz
C
Repaired by:
31
Block
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
engineer
11
Detailed Code
Refer to “1-5-4. Self-diagnosis Code Table”.
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
1-5-3. Service Mode Display
The service mode display shows up to six self-diagnosis codes shown in the past.
1.
Display Method
While pressing the “STOP” key, set the switch from OFF to “ON”, and continue pressing the “STOP” key for 5 seconds continuously. The
service mode will be displayed, and the counter will show the backup No. and the 5-character self-diagnosis codes.
Viewfinder
Display window
3 C : 3 1 : 11
[3] C : 3 1 : 1 1
Lights up
[3]
Backup No.
C:31:11
Self-diagnosis Codes
Control Dial
Order of previous errors
2.
Switching of Backup No.
By rotating the control dial, past self-diagnosis codes will be shown in order. The backup No. in the [] indicates the order in which the
problem occurred. (If the number of problems which occurred is less than 6, only the number of problems which occurred will be shown.)
[1] : Occurred first time
[3] : Occurred third time
[5] : Occurred fifth time
[2] : Occurred second time [4] : Occurred fourth time
[6] : Occurred the last time
3.
End of Display
Turning OFF the power supply will end the service mode display.
Note: The “self-diagnosis display” data will not be erased (reset), when the lithium battery (CONTROL KEY BLOCK (CF5100): BT001) is removed.
1-4
DCR-TRV255E/TRV260/TRV265/TRV265E
1-5-4. Self-diagnosis Code Table
Repaired by:
Self-diagnosis Code
Block
Function
Detailed
Code
Symptom/State
C
C
C
0
2
2
4
1
2
0
0
0
0
0
0
C
3
1
1
0
C
3
1
1
1
C
C
C
C
C
C
C
C
C
C
C
3
3
3
3
3
3
3
3
3
3
3
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
3
3
4
4
4
4
4
0
1
2
3
0
1
0
1
2
3
4
C
3
2
1
0
C
3
2
1
1
C
3
2
2
0
C
3
2
2
1
C
3
2
2
2
T reel fault.
C
3
2
2
3
S reel fault.
C
3
2
3
0
FG fault when starting capstan.
C
3
2
3
1
FG fault during normal capstan
operations.
C
3
2
4
0
FG fault when starting drum.
C
3
2
4
1
PG fault when starting drum.
C
3
2
4
2
C
3
2
4
3
C
3
2
4
4
Correction
Non-standard battery is used.
Condensation.
Video head is dirty.
LOAD direction. Loading does not
complete within specified time
UNLOAD direction. Loading does not
complete within specified time
T reel side tape slacking when unloading.
S reel side tape slacking when unloading.
T reel fault.
S reel fault.
FG fault when starting capstan.
FG fault during normal capstan operations.
FG fault when starting drum.
PG fault when starting drum.
FG fault during normal drum operations.
PG fault during normal drum operations.
Phase fault during normal drum operations.
LOAD direction loading motor timeout.
UNLOAD direction loading motor
time-out.
T reel side tape slacking when
unloading.
S reel side tape slacking when
unloading.
FG fault during normal drum
operations.
PG fault during normal drum
operations.
Phase fault during normal drum
operations.
1-5
Use the InfoLITHIUM battery.
Remove the cassette, and insert it again after one hour.
Clean with the optional cleaning cassette.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
DCR-TRV255E/TRV260/TRV265/TRV265E
Repaired by:
Self-diagnosis Code
Block
Function
Detailed
Code
Symptom/State
E
6
1
0
0
Difficult to adjust focus
(Cannot initialize focus.)
E
6
1
1
0
Zoom operations fault
(Cannot initialize zoom lens.)
1-6. CHANGE OF IC4501
Due to the change of IC4501 (mechanism control), there are two
types of versions A and B
The EEPROM data are different according to respective versions.
Also, the IC4501 version can be checked by a discrimination method
by the model name or by the adjusting remote commander.
Note 1: Changing the version does not make any changes in
schematic diagrams and the rest.
Note 2: Make it sure to confirm the version after replacing IC4501.
1.
Discrimination method by the model name of
IC4501 (mechanism control)
VC-344 BOARD (SIDE A)
IC4501
Correction
Inspect the lens block focus reset sensor (Pin qs of CN1551 of
VC-344 board) when focusing is performed when the control dial
is rotated in the focus manual mode and the focus motor drive circuit
(IC1553 of VC-344 board) when the focusing is not performed.
Inspect the lens block zoom reset sensor (Pin qg of CN1551 of
VC-344 board) when zooming is performed when the zoom switch
is operated and the zoom motor drive circuit (IC1553 of VC-344
board) when zooming is not performed.
2.
Discrimination method by adjusting remote
commander
Version check method:
1) Select page: 3, and address: FF.
2) The version of IC4501 can be checked from the displayed data.
Data
Version
01
A
02
B
Data change method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 1C, and input the data in the following table.
Note: To write in the non-volatile memory (EEPROM), press the
PAUSE button of the adjustment remote commander each
time to set the data.
3) Select page: 0, address: 01, and set data: 00.
Version
Address
D0
154 : A
155 : B
1-6E
A
B
40
42
DCR-TRV255E/TRV260/TRV265/TRV265E
SECTION 2
DISASSEMBLY
HELP
2-1. FLOW CHART
Note: When you remove Cabinet (R) Block,
or when you assembly, please slide
NS knob to the position of "ON".
The following flow chart shows the disassembly procedure.
1
2
NS knob
8
1
3
2
7
2
1
6
5
9
9 q;
5
6
5
7
qd
qf
1
4
3
4
4
8
4
3
1
2
3
4
5
Lock ace x3
Cabi (upper)
Grip belt
Lock ace x3
Cabi (L)
1
6 Lock ace x3
7 Claw
8 Front panel
Note: Flexible board is connected.
9 FP-796: CN754, CN1001
1
2
3
4
5
6
Lock ace x6
NS knob to the position of "ON".
Cabi (R)
VC-344: CN1007
VC-344: CN1003
VC-344: CN1008
1
2
3
4
5
6
7
8
Tripod Screw
Tapping P2 x2
Tapping P2 x6
Claw
CF-5100
Tapping P2 x4
Claw x2
P Cabi (C)
8
5
1
9
q;
qa
qs
qd
qf
qg
qh
Tapping P2 x2
Tapping P2 x1
P Cabi (M)
PD-204: CN6005
PD-204: CN6001
PD-204, LCD901, ND901
Tapping P2 x4
Hinge assy
4
3
3
7
8
5
1
6
6
2
2
Lift up the EVF.
Tapping P2 x4
Down the EVF.
EVF block
EVF Cabi (upper)
EVF Cabi (lower)
FP-797: LCD902
EVF lens
1
2
3
4
6
3
2
5
6
7
8
6
4
7
3
1
2
3
4
qs
qh
6
4
qa
HELP qg
VC-344: CN1013
VC-344: CN4001
Lock ace x3
EVF/Battely panel block
2
5
6
7
8
1
2
5
VC-344: CN1009
Tapping P2 x1
Lock ace x1
SS-5100
1 VC-344: CN1501 4 Lock ace x2
2 VC-344: CN1551 5 Boss
6 Lens LSV-820A
3 Lens sheet
2
3
7
3
1
2
8
4
5
1
1 Tapping P2 x4
2 Claw x2
3 P Cabi (C)
2-1
1
2
3
4
6
VF blind sheet
VC-344: CN2403, CN2404, CN3201
VC-344: CN2401
Screw (M1.7) x2
5
6
7
8
1
Claw
Open the VC-344.
VC-344: CN2402
VC-344
1 Screw (M1.7) x3
2 CS frame
2-2
1
DCR-TRV255E/TRV260/TRV265/TRV265E
2-2. MECHANISM DECK SERVICE POSITION
Connection to Check the Mechanism deck
To check the mechanism deck, set the Camera or VTR to the "Forced power ON" mode. (Or, connect the control key
block (SS-5100) to the CN1009 of VC-344 board and set the power switch to the "CAMERA" or "PLAY/edit" position.)
Operate the Camera functions of the zoom and focus, the VTR function using the adjustment remote commander
(with the HOLD switch set in the OFF position).
Setting the "Forced Camera Power ON" mode
Exiting the "Forced Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 02 and
press the PAUSE button of the adjustment remote
commander.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, data: 00, and press the PAUSE
button of the adjustment remote commander.
3) Select page: 0, address: 01, and set data: 00.
Setting the "Forced VTR Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 02 and
press the PAUSE button of the adjustment remote
commander.
1
2
1
How to move up the cassette
compartment manually
2
6
5
9
Press the cassette compartment
in the direction of the arrow A
to move it up in the direction of
the arrow B.
7
4
1
3
B
A
1
Lens block
8
4
Mechanism deck
6
3
2
Info lithium battery
(L series)
2
7
1
3
CPC jig connector
(J-6082-539-A)
1
6
5
Front panel block
1
Contacting
surface
8
4
4
VC-344 board
6
5
Adjustment remote
commander (RM-95)
I/F unit for LANC control
(J-6082-521-A)
4
8
7
4
3
Cabinet R block
Eject switch
3
EVF block/
Battery panel block assembly
5
1
6
6
2
AC IN
Control key block
(SS-5100)
AC adaptor
1
2
5
3
2-3
When exiting the "Forced Power ON" mode, connect the control
key block (SS-5100) to the CN1009 of VC-344 board. Or, when
ejecting the cassette, connect the control key block (SS-5100) to
the CN1009 of VC-344 board. and press the Eject switch.
2-4
DCR-TRV255E/TRV260/TRV265/TRV265E
2-3. LCD SERVICE POSITION
2
3
1
CPC jig connector
1
Conductor side
CN1011
16
LCD panel
Back light unit
PD-204 board
CPC jig connector
(J-6082-539-A)
L serices Info
LITHIUM battery (7.2Vdc)
AC adaptor
AC IN
AC adaptor
AC IN
LANC jack
Adjustment
remote commander (RM-95)
I/F unit for LANC control
(J-6082-521-A)
2-5
DCR-TRV255E/TRV260/TRV265/TRV265E
2-4. CIRCUIT BOARDS LOCATION
VC-344
CD-471
SI-041
PD-204
Board Name
Function
CD-471
VC-344
CCD IMAGER
A/D CONVERTER, TIMING GENERATOR, DV SIGNAL PROCESS, LENS
CONTROL, STEADYSHOT, DV INTERFACE, VIDEO OUT, LENS DRIVE,
REC/PB AMP, SERVO, CAMERA/MECHA CONTROL, HI CONTROL,
AUDIO PROCESS, DC CONTROL, CONNECTOR
LCD DRIVE, BACKLIGHT DRIVE
JACK
PD-204
SI-041
2-6
DCR-TRV255E/TRV260/TRV265/TRV265E
2-5. FLEXIBLE BOARDS LOCATION
SS-5100
FP-797
FFC-005
CF-5100
FP-792
FP-796
PR-5100
2-7E
DCR-TRV255E/TRV260/TRV265/TRV265E
HELP
Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
Harness (PD-124)
Claw
Claw
Note: Close the LCD panel, when you work.
HELP
DCR-TRV255E/TRV260/TRV265/TRV265E
3. BLOCK DIAGRAMS
Link
OVERALL BLOCK DIAGRAM (1/5)
OVERALL BLOCK DIAGRAM (5/5)
OVERALL BLOCK DIAGRAM (2/5)
POWER BLOCK DIAGRAM (1/2)
OVERALL BLOCK DIAGRAM (3/5)
POWER BLOCK DIAGRAM (2/2)
OVERALL BLOCK DIAGRAM (4/5)
DCR-TRV255E/TRV260/TRV265/TRV265E
SECTION 3
BLOCK DIAGRAMS
3. BLOCK DIAGRAMS
( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
3-1. OVERALL BLOCK DIAGRAM (1/5)
CD-471 BOARD
VC-344 BOARD (1/4)
LENS ASSY
XRST VTR
IRIS
FOCUS MOTOR
M
NIGHT
SHOT
LENS
TEMP
SENSOR
IRIS
METER
M
ZOOM
SENSOR
BUFFER
7
14
7
ı
V1-V4,RG,H1,H2 9
11
ı
14
1 – 4 12 – 14
M
FOCUS
SENSOR
CN1501
1
H
6
ı
8
1
ı
4
D 2.8V
16
10 – 7
ZM SENSE
VCC
5
7
ZOOM
A,B,XA,XB
17 19
ZOOM
MOTOR
DRIVE
13 – 16
ZM RST
FC RST
1–4
13
IC1553
(3/10)
4
1
21 23
21
14
6
IC1552
(3/10)
7
HALL
OFFSET
HALL
REF
V1 – V4
19
IRIS
BIAS(-)
IRIS
HALL(-)
HALL
AMP
3
LD EN0
LD DIR0A
LD DIR0B
20
5
2
HALL
BIAS
FOCUS
MOTOR
DRIVE
9 – 12
LD EN1
LD DIR1A
LD DIR1B
23
IRIS
IRIS
BIAS(+) HALL(+)
FC SENSE
VCC
FOCUS
A,B,XA,XB
2
22
RG, H1, H2
30
25
26
28
31
IRIS DRIVE(-)
8
IC1554
(3/10)
5
7
FREQ TUNE
X1501
27MHz
IC1501
40
TIMING
GENERATOR
(1/10)
12
2
ı
11
IC1502
S/H, AGC, A/D CONVERTER
(1/10)
20
43
46 47 48
5
IRIS
DRIVE
12
10
HALL REF
VCK
VCK
TG AHD, TG AVD
HALL
AD
42
CAM DD ON
Q1555 (1/2)
HALL OFFSET,
HALL GAIN
7
3
2
1
IC1601
EVR
(D/A CONVERTER)
(3/10)
OVERALL (3/5)
(PAGE 3-5)
2
OVERALL (2/5)
(PAGE 3-3)
LD EN0,EN1,
LD DIR0A,B,
LD DIR1A,B,
35 38 37 39
IRIS PWM,
IRIS COM
D 2.8V
TG ZSG1
TG ZV1
TG ID
TG VGAT
34
41
48
36
HALL REG
1
FE CLPOB
16
XTAL AMP
HALL
GAIN
AD0-AD9
XRST VTR
44
45
4
HALL
GAIN
Q1555 (2/2) ZM RST LED
FC RST LED
LENS TEMP AD
CLPDM,
PBLK,
XSHP,
19
XSHD
21
ı
23
1
2
15
16
18
21
22
CAM SI, CAM SO, CAM SCK
15 12
ZM SENS OUT
FC SENS OUT
17 18
TEMP
IR SWITCH
5
XNS SW
CN1551
CCD OUT
FC RST, ZM RST
XCS TG
ZOOM MOTOR
CN951
Q951
IC951
CCD
IMAGER
1
OVERALL (3/5)
(PAGE 3-5)
CS CH, CH SO, CH SCK
CAM DD ON
XCS TG
IRIS PWM, IRIS COM
HALL AD, XNS SW
6
7
8
CAM SI, CAM SO, CAM SCK
CAM SO, CAM SCK
DA STRB
DA STRB
3
OVERALL (3/5)
(PAGE 3-5)
AV JACK IN
XS JACK IN
VOUT ON
SI-041 BOARD (1/3)
MIC901
L
1
R
3
CN753
INT MIC L
2
3
CN1001 (1/3)
CN754 (1/3)
33
4
32
5
20
17
IC5401
INT MIC R
L, R
Q751
LED
DRIVE
IC751
REMOTE
COMMANDER
RECEIVER
D753, 754
(IR EMITTER)
1
XSIRCS SIG
D759
(TALLY)
TRV265/TRV265E
J751
Y
S VIDEO
OUT
C
XS JACK IN
AV JACK IN
A/V OUT
23
14
25
10
13
24
11
26
15
L
J752
IR_ON
12
V
R
42
46
L
R
SIRCS PWM
D1009
Q5401, 5403
SIRCS SIG
XF TALLY LED
Y
C
19
18
17
20
XCS IC 5401
4
56
58
REC OUT L, R
3
2
62
64
PB IN L, R
15
16
IC5402
A/D, D/A
CONVERTER
(8/10)
4
V
7
9
OVERALL (2/5)
(PAGE 3-3)
13
5
IC6501
Y/C MIX
BUFFER
(2/10)
14
1
Q3308
Y
BUFFER
C
6
C OUT
BEEP
IR ON
AV JACK IN
R
SDC ON
3
SIRCS PWM
SIRCS SIG
XF TALLY LED
SP+, –
A : VIDEO SIGNAL
A : AUDIO SIGNAL
05
3-1
Y OUT
L
CN1008
1
2
DATA TO SFD
DATA FROM SFD
SFD BCK
SFD LRCK
SFD FCK
25
CONTROL KEY BLOCK (CF-5100) (1/2)
SP901
SPEAKER
8
9
12
10
11
11
XS JACK IN
22
19
VSP SO, XVSP SCK
13
SP+,–
25
18
MUTE
POWER MUTE
27
26
AUDIO
PROCESS
(8/10)
VSP SO, XVSP SCK
3-2
5
OVERALL (3/5)
(PAGE 3-5)
6
OVERALL (4/5)
(PAGE 3-8)
DCR-TRV255E/TRV260/TRV265/TRV265E
3. BLOCK DIAGRAMS
3-2. OVERALL BLOCK DIAGRAM (2/5)
( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
VCK
TG AHD, TG AVD
OVERALL (1/5)
(PAGE 3-2)
TG ZSG1
TG ZV1
TG ID
TG VGAT
LD EN0, EN1,
LD DIR0A, B,
LD DIR1A, B
FC RST, ZM RST
8
SPCK
154
ı
157
209
143
159
XUSB EN
9
OVERALL (3/5)
(PAGE 3-5)
VREF
LINE OUT VD
XCS VFD
XCS SFD
XCS IC3301
CAM SI, CAM SO, CAM SCK
CAM XCE
XIRQ GEMINI
OSD V
IC3302
DV INTERFACE
(2/10)
TPA+, –,
6 TPB+, –
ı
9
Q3307
5
6
8
9
11
12
14
15
141
126
127
IC3301
DV SIGNAL
PROCESS,
D/A CONVERTER,
LENS CONTROL,
STEADYSHOT
(2/10)
42
43
USB D+
77
75
76
78
180
179
178
35
USB D–
D–
1
2
(USB)
VCC
1
M2200 MECHA DECK (1/2)
9
5
2
27
IC3201
REC/PB
AMP
(4/10)
40
42
44
3
4
10
9
38
37
43
CPC
VIDEO HEAD
(FOR CHECK)
CH
SP1
FLYING
ERASE
5
4
7
8
ODD (SP1)
EVEN (SP2)
RF SWP
Q3202, 3204, 3205
SW PS
ALL PS
FLYING
ERAE
OSC
ATF LATCH
CH
SP2
11
FRRV,TRRV,TRRT
XFE ON
RF SWP
161
162
USB DET
XUSB ON
129
SW PS
ALL PS
181
182
ATF LATCH
187
188
189
196
195
194
193
197
FRRV, TRRV, TRRT
167
ı
176
MC BUS
185
184
178
VSP SO, VSP SI, XVSP SCK
190
192
19
MC BUS
11
OVERALL (3/5)
(PAGE 3-5)
VSP SO, VSP SI, XVSP SCK
XRST VTR
XRST VTR
VD SO, VD SCK
VD SO, VD SI, VD SCK
XCS VD
XCS LCD
XCS VD
OVERALL (4/5)
(PAGE 3-8)
4
OVERALL (1/5)
(PAGE 3-2)
DATA TO SFD
DATA FROM SFD
SFD BCK
SFD LRCK
SFD FCK
Y OUT
C OUT
63
64
68
67
69
110
113
119
121 PANEL R, G, B
123
CN1003
(1/2)
Q3303
5
ı
7
BUFFER
10
131
130
PANEL HD, VD
XCS LCD DA
VD SO, VD SI, VD SCK
9
C-SYNC/XHD
PANEL XVD
PANEL HD
PANEL VD
13
PANEL R, G, B
11
ı
13
8
BL CONT
12
OVERALL (5/5)
(PAGE 3-9)
BL CONT
4
OVERALL (4/5)
(PAGE 3-8)
EVF BLOCK
CN1013
116
BW Y
PANEL HD
PANEL VD
117
EVF DD ON
6
5
4
2
VIDEO IN
H SYNC
V SYNC
NSLEEP
LCD902
B/W
LCD UNIT
A : VIDEO SIGNAL
A : AUDIO SIGNAL
A : VIDEO/AUDIO SIGNAL
A : VIDEO/AUDIO/SERVO SIGNAL
05
3-3
TRV255E
3
CN3201
28
46
REC A1, A2
CN752
D+
3
36
RF SWP
FRRV
PB Y OUT
35
REC CK
DV
D755
CN1011
(1/3)
RF MON
USB D–
REC DT
(IN/OUT)
2
34
USB DET
RF IN
TRV260/
TRV265/
TRV265E
(OUT)
30
96
DV
USB 3.3V
USB D+
214
215
212
213
CN754
5 (2/3)
6
8
9
29
31
32
29-32 34-37
18
20
10
47
79
4
3
163
DRP
SWP
TRCKO
24M
45
ı
42
216
OVERALL (3/5)
(PAGE 3-6)
VFO VD
VFO OE
L BUS0-3
RF MON
FE CLPOB
199
ı
208
CN1001
(2/3) 28
MC BUS
AD0-AD9
2
CN751
SI-041 BOARD (2/3)
VC-344 BOARD (2/4)
3-4
DCR-TRV255E/TRV260/TRV265/TRV265E
3. BLOCK DIAGRAMS
3-3. OVERALL BLOCK DIAGRAM (3/5)
( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
VC-344 BOARD (3/4)
(5/10)
M2200 MECHA DECK (2/2)
IC2401 (3/3)
34
OVERALL (1/5)
(PAGE 3-2)
OVERALL (1/5)
(PAGE 3-1)
1
7
(5/10)
M901
DRUM MOTOR
CN2402
XRST VTR
100
DRUM PWM
88
ZM RST LED
FC RST LED
LENS TEMP AD
CAP PWM
89
55
57
127
VSP SO, XVSP SCK
XFE ON
RF SWP
USB DET
XUSB ON
SW PS
ALL PS
ATF LATCH
170
172
113
131
29
28
162
23
179
178
FRRV, TRRV, TRRT
OVERALL (2/5)
(PAGE 3-4)
(9/10)
45
ı
52
32
33
11
MC BUS
VSP SO, VSP SI, XVSP SCK
XCS IC 2401
16
197
198
45 DRUM ERROR
44
LPF
43
41
CAP ERROR
25
6
9
24
Q1310
IC1301 (1/2)
DRUM/CAPSTAN 62
PWM
61
DRIVE
DRUM VS
SWITCHING
SWITCHING
SERIAL
INTERFACE
37
35
DRUM PG
SPCK
IC2401 (1/3)
63
DRUM U, V, W
65
68
DRUM
MOTOR
DRIVE
8
OVERALL (2/5)
(PAGE 3-3)
53
50
FG AMP
52
PG AMP
49
DRUM FG
DRUM PG
75
77
74
76
78
CAPSTAN
MOTOR
DRIVE
10
ı
15
IC4501
190
119
69
70
67
106
ı
108
82
83
80
15
13
M
FG
PG
3
DRUM FG
1
DRUM PG
M902
CAPSTAN MOTOR
CN2403
CAP VS
CAMERA/
MECHA
CONTROL
(6/10)
10
ı
5
Q1309
DRUM FG
38
36
64
67
CAP FG
CAP FG
4
7
8
FG AMP
CAP U, V, W
HU1, 2
HV1, 2
HW1, 2
FG1, 2
DEW AD
DEW AD
MODE SW A-C
MODE SW A-C
(5/10)
14
ı
9
M
7
ı
2
HU, HV, HW
18
16
CAPSTAN FG
22
DEW SENSOR
21
ı
19
S901
MODE SWITCH
XRST VTR
VD SO, VD SI, VD SCK
XCS VD
XCS LCD
61
38
138
31
OVERALL (2/5)
(PAGE 3-3)
9
VFO VD
VFO OE
DRP
SWP
XUSB EN
VREF
LINE OUT VD
XCS VFD
XCS SFD
XCS IC 3301
203
68
163
164
132
204
201
155
215
97
CAM XCE
XIRQ GEMINI
161
208
62
73
71
CS CH, CH SO, CH SCK
CAM DD ON
XCS TG
193
110
109
120
LM LIM DET
LM LIM DET
TAPE END
TAPE END
TAPE TOP
TAPE TOP
T REEL FG
T REEL FG
S REEL FG
S REEL FG
TAPE LED ON
TAPE LED ON
HALL AD, XNS SW
XNS SW
HALL AD
CAM SI, CAM SO, CAM SCK
DA STRB
AV JACK IN
XS JACK IN
VOUT ON
94
95
187
128
78
77
75
59
185
186
26
IC2401 (2/3)
32
33
31
LOADING
MOTOR
DRIVE
BEEP
OVERALL (1/5)
(PAGE 3-2)
5
43
Q4502
MODULATOR
MELODY ENV
Q4501
MODULATOR
MELODY CARR
194
209
M
Q002
20
19
TAPE TOP
DETECT
18
29
T REEL
FG AMP
26
27
T REEL (+) , (–)
9
10
T REEL H001
SENSOR
25
S REEL
FG AMP
22
23
S REEL (+) , (–)
7
6
S REEL H002
SENSOR
Q2401
LED DRIVE
TAPE TOP (C)
TAPE LED (K)
2
1
Q001
TAPE END
SENSOR
D001
TAPE
LED
TAPE TOP
SENSOR
3
S001
13
12
14
15
S002
REC PROOF
ME/MP
HI8 MP
C. C. LOCK
OSD V
SYS V
XCC DOWN
8
9
63
ı
66
XSYS RST
14
OVERALL (4/5)
(PAGE 3-8)
IC 5001 SO, IC 5001 SI, IC 5001 SCK, XCS IC 5001
ZOOM VR AD
CUSTOM LED ON
135
169
CN1001
(3/3)
Q1001
IN7 (VL 16V)
91
SI-041 BOARD
(3/3)
VIDEO LIGHT
DRIVE
D001 – 003
(VIDEO LIGHT)
CN754(3/3)
1
36
VL+
FP-792 FLEXIBLE
LND754
V LIGHT PWM
10
87
86
84
XCS EEP
1
2
5
6
EEP SI, EEP SO, EEP SCK
IC4502
EEPROM
(6/10)
1
XCS EEP
CN1011
(2/3)
XCS EEP
X4501
20MHz
EEP SI, EEP SO, EEP SCK
EEP SI, EEP SO, EEP SCK
16
CPC
1
14 (FOR CHECK)
15
05
3-5
M903
LOADING MOTOR
TAPE END
DETECT
ME SW
HI8 MP SW
214
181
3
IR ON
SDC ON
CN2404
TAPE END (C)
REC PROOF
ME SW
HI8 MP SW
XCC DOWN
98
202
CN2401
LM (+) , LM (–)
2
1
21
VSP SO, XVSP SCK
XCS IC 5401
69
72
REC PROOF
173
20
IRIS PWM, IRIS COM
3
192
180
CAM SI, CAM SO, CAM SCK
OVERALL (1/5)
(PAGE 3-2)
30
LOAD,
UNLOAD
LOAD
UNLOAD
3-6
A : SERVO SIGNAL
DCR-TRV255E/TRV260/TRV265/TRV265E
3. BLOCK DIAGRAMS
( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
3-4. OVERALL BLOCK DIAGRAM (4/5)
VC-344 BOARD (4/4)
CN1011
(3/3)
LANC IN
LANC OUT
XLANC POWER ON
CN6001
(1/2)
CN6005
AD5
1
2
CN1003
(2/2)
20
KEY AD5
20
IC5001
45
HI CONTROL
(7/10)
41
SIRCS PWM
SIRCS PWM
SIRCS SIG
SIRCS SIG
XF TALLY LED
10
CN1009
XPHOTO FREEZE
XPHOTO FREEZE
A 2.8V
D 2.8V
AU 2.8V
EP 2.8V
RP 2.8V
A 4.6V
AU 4.6V
EP 4.6V
RP 4.6V
RP 6V
MT 5V
VL 16V
CAM –7.5V
CAM 15V
EP 13.5V
PANEL –15.3V
6
S001
START/STOP
SW
XS/S SW
(CHG)
OFF
S004
POWER
XPOWERSW
ON
>
XMODE SW
KEY AD7
1
XPOWER SW
4
XMODE SW
3
69
1
29
2
28
52
MODE
51
S002
EJECT SW
XEJECT SW
D004
XCHARGE LED
CHG
D002
XCAM LED
CAMERA
XEJECT SW
16
XCHARGE LED
6
XCAM LED
8
XVTR LED
PLAY/EDIT
XVTR LED
9
ZOOM VR
IC1301 (2/2)
DC CONTROL,
RESET
(9/10)
9
CONTROL KEY BLOCK (CF-5100) (2/2)
S024
CN1007
DIAL A, B
19
20
BT901
CN4001
MENU EXEC
FUNCTION
SW
KEY AD0 – KEY AD3
S001
DISP/
BATT INFO SW
6
S002
RESET SW
D002
XBATT INFO SW
XRESET
22
XCUSTOM LED ON
EASY
KEY AD0 – KEY AD3
BT001
LITHIUM
BATTERY
9
3
CHARGE
CONTROL
27
28
HI EVER SO, HI EVER SCK
BATT IN
VTR DD ON
XCS DD
31
35
49
79
80
43
42
BATT/XEXT
FAST CHARGE
INIT CHARGE ON
44
38
26
Q5001
BATTERY
CHARGE
DETECTOR
VBAT
D1301
REG 3V
45
39
40
BATT SIG
59
ı
61
65
3
19
32
5
47
23
ı
26
XCC DOWN
XSYS RST
IC 5001 SO, IC 5001 SI, IC 5001 SCK, XCS IC 5001
14
OVERALL (3/5)
(PAGE 3-6)
IC 5001 SO, IC 5001 SI, IC 5001 SCK, XCS IC 5001
73
ZOOM VR AD
CUSTOM LED ON
ZOOM VR AD
CUSTOM LED ON
LI 3V
3-7
OVERALL (2/5)
(PAGE 3-3)
XCC DOWN
XSYS RST
XRESET
05
10
OSD V
SYS V
OSD V
SYS V
3-8
+
–
DC IN
2
6
Q1002
LED
DRIVE
LI 3V
4
3
OSD V
5
14
18
16
Q4001, 4002
EVER 3.0V
VOUT
74
37
38
DIAL A, B
VTR UNREG
BATT UNREG
Q4003, 4004
XRESET
SEL/PUSH
EXEC
DIAL
OVERALL (2/5)
(PAGE 3-4)
11
ZOOM VR AD
12
X5002
32.768kHz
12
RV001
ZOOM VR
X5001
10MHz
4
20
21
D001
BL CONT
14
D 1.5V
D 1.9V
14
15
13
XF TALLY LED
BL REG
PHOTO
OVERALL (1/5)
(PAGE 3-2)
67
CONTROL KEY BLOCK (SS-5100)
S003
PHOTO
6
BATT SIG
S601
PANEL
REVERSE
SW
PD-204 BOARD (1/2)
INIT CHARGE ON
CONTROL KEY
BLOCK (PR-5100)
39
40
8
BATT/XEXT
(FOR CHECK)
11
13
FAST CHARGE
12
CPC
+
5
S
1
–
BATTERY
TERMINAL
DCR-TRV255E/TRV260/TRV265/TRV265E
3. BLOCK DIAGRAMS
3-5. OVERALL BLOCK DIAGRAM (5/5)
( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
PD-204 BOARD (2/2)
TYPE C/S: Please refer to page 1-3
to discriminate the type of LCD.
NOTE: CN6004 Pin Name A/B
A: TYPE C MODEL
B: TYPE S MODEL
CN6001
(2/2)
PANEL R, PANEL G, PANEL B
7
ı
5
XCS LCD DA
10
11
ı
13
VD SO, VD SI, VD SCK
OVERALL (2/5)
(PAGE 3-4)
12
C-SYNC/XHD
PANEL XVD
9
8
LCD901
CN6004
PANEL R, PANEL G, PANEL B
XCS LCD DA
40
ı
38
45
46
ı
48
VD SO, VD SI, VD SCK
C-SYNC/XHD
PANEL XVD
19
ı
21
IC6001
VR, VG, VB
VCOM
23
LCD
DRIVER
2–6
14–16
29
32–35
N.C./SPC, GRES/EX1, GPCK/MO1, GSRT/MO2,
STBYB/PSG,RESET/EX2, VBC/CLS, STBYB/RES,
SRT/PSS1, OE/PSS2, CLR/CTR, MCLK/CLD, HCNT/SPD
43
42
19
ı
21
11
2.5 INCH
COLOR
LCD UNIT
5
ı
10
12
ı
18
T6001, Q6002
INVERTER
TRANSFORMER
BL REG
CN6003
BL HIGH
BACKLIGHT
DRIBE
10
ND901
BACKLIGHT
BL CONT
4
BL CONT
28
30
BL DET
D6004
BL LOW
3
A : VIDEO SIGNAL
05
3-9
3-10
DCR-TRV255E/TRV260/TRV265/TRV265E
3. BLOCK DIAGRAMS
3-6. POWER BLOCK DIAGRAM (1/2)
( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
VC-344 BOARD (1/2)
BT901
BATTERY
TERMINAL
+
S
–
BATT SIG
BATT/XEXT
CN4001
BATT UNREG
BATT SIG
BATT GND
BATT/XEXT
FAST CHARGE
INIT CHARGE ON
BATT SIG
F002
6
5
Q4003, 4004
1
CHARGE
CONTROL
INIT CHARGE ON
BATT UNREG
FAST CHARGE
+
ACV UNREG
BATT/XEXT
DC IN
–
4
Q1316, 1318, 1320
F003
Q4001, 4002
MT 5V
5V REG
F004 BL REG UNREG
2
F001 VTR UNREG
ACV GND
VTR UNREG
3
D1302
V OUT
VOUT 42
SEL 32
36
43
56
55
BATT IN
CS 44
CDET
VIN
VCC0
VCC1
VBAT
REG 3V
VRO
RST
39
40
41
29
LD
DIN
CLK
CTL1
26
27
28
38
LI 3V
D1301
EVER 3.0V
XCS DD
HI EVER SO
HI EVER SCK
VTR DD ON
CAM DD ON
IC1301
Q1315, 1317
1.9V REG
DC CONTROL, RESET
(9/10)
VR 34
TYPE C/S: Please refer to page 1-3 to descriminate the type of LCD.
Q1306
L1302
L1310
A
BL REG
SWITCHING
PD- 204 BOARD
POWER(2/2)
(PAGE 3-13)
OUT2 58
IN2 21
+INE2 14
37 VREF
1 DTC6
D 1.9V
Q1305
L1309
L1305
D 1.5V
L1314
PANEL 4.6V
PANEL –15.3V
D 2.8V
PANEL 13.5V
L1313
A 2.8V
PANEL 2.8V
SWITCHING
OUT1 57
IN1 20
30 RT
Q1307
L1303
TYPE C
L1315
AU 2.8V
L1312
RP 2.8V
FB6001
BL CONT
OUT3 59
IN3 22
Q1304, 1314
–7.5V REG
D1306
L1311
Q1302, 1312, 1313
LCD901
2.5INCH
COLOR
LCD UNIT
R6031
L1316
IC6001
LCD DRIVER
28
IN7 (VL 16V)
CN6004
VSH
24
VGL
3
VGH
1
VDD
23
VDD
4
R6026
R6019
R6020
L6001
SWITCHING
L1301
L6004
CAM –7.5V
CAM 15V
+15V REG
TYPE S
Q1311
L1308
SWITCHING
OUT7 63
–INE7 2
1
5
IC1302
6V REG
(9/10)
4
L1319
SWITCHING
OUT4 60
IN4 23
L1304
16
PANEL 13.5V
19
PANEL 2.8V
17
A 4.6V
L1318
D1303
PANEL 4.6V
PANEL –15.3V
18
EP 4.6V
L1317
Q1308
RP 6.0V
L6001
L1320
RP 4.6V
EP 13.5V
BL CONT
4
CN1003
Q1324, 1325
–15.3V REG
Q1301, 1303
13.5V REG
PANEL 2.8V
17
PANEL 4.6V
18
BL REG
2
PANEL –15.3V
16
PANEL 13.5V
19
2
BL CONT
4
BL REG
CN6001
05
3-11
CN6004
VSH5V 24
VGL
3
VGH
1
VSH3V
23
LCD901
2.5INCH
COLOR
LCD UNIT
FB6001
AU 4.6V
D1305
BL CONT
Q6004, 6005,
6008, 6009
L6004
3-12
L6002 L6003
28
IC6001
LCD DRIVER
T6001, Q6002
INVERTER
TRANSFORMER
BACKLIGHT
DRIVE
24
CN6003
BL HIGH
10
ND901
BACK
LIGHT
DCR-TRV255E/TRV260/TRV265/TRV265E
3. BLOCK DIAGRAMS
( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
3-7. POWER BLOCK DIAGRAM (2/2)
VC-344 BOARD (2/2)
CONTROL KEY BLOCK (SS-5100)
CN1009
D004
CHARGE LED VDD
BATT/XEXT
FAST CHARGE
INIT CHARGE ON
BATT/XEXT
BATT/EXT 74
FAST CHARGE 37
HI CONTROL
INIT CHARGE ON
INIT CHARGE 38
(7/10)
CHG
IC5001
Q5001
BATTERY
CHARGE
DETECTOR
BATT SIG
43 IB SI
42 IB SO
BATT UNREG
VTR DD ON
XCS DD
HI EVER SO
HI EVER SCK
54 BATT SENSE
MT 5V
VTR UNREG
D002
MODE LED VDD
35
49
20
21
10
D 2.8V
CAMERA
RV001
(ZOOM)
T
D001
W
11
PLAY/EDIT
55 ACV SENSE
XHI DS HELP 33
VOUT
CN1007
D 2.8V
17
D 2.8V
15
D 2.8V
4
D 2.8V
VTR DD SENSE 56
BATT IN
31 BATT IN
LI 3V
LI 3V
EVER 3.0V
LI 3V
EVER 3.0V
XCS DD
HI EVER SO
HI EVER SCK
VTR DD ON
CAM DD ON
CONTROL KEY BLOCK (CF-5100)
FUNCTION
SWITCH
BT001
LITHIUM
BATTERY
3
D002
CUSTOM LED VDD
7
EASY
IC3301
DV SIGNAL PROCESS,
D/A CONVERTER,
LENS CONTROL,
STEADYSHOT
(2/10)
D 1.9V
D 2.8V
A 2.8V
AU 2.8V
AU 2.8V
DV
INTERFACE
(2/10)
L3321
L3313
FB1601
D 2.8V
L1501
D 1.5V
L6501
D 1.5V
FB1504
D 1.9V
FB1501
POWER (1/2)
(PAGE 3-12)
IC3302
D759
(TALLY)
TRV265/265E
CN1001
USB 3.3V
A 2.8V
RP 2.8V
IN7 (VL 16V)
SI-041 BOARD
FB3302
EVR
(D/A CONVERTER)
(3/10)
L3305
IC1601
FB3303
FB3301
IC1501
TIMING
GENERATOR
(1/10)
L3307
IC1502
S/H, AGC,
A/D CONVETER
(1/10)
L3310
IC6501
Y/C MIX
BUFFER
(2/10)
L3320
A
5
IC751
REMOTE
COMMANDER
RECEIVER
24
15
16
21 MT 5V
22
D 2.8V
IN7 (VL 16V)
IN7 (VL 16V)
MT 5V
CAM –7.5V
CAM 15V
CN754
13
MT 5V
D753, 754
(IR EMITTER)
CAM –7.5V
CAM 15V
RP 6.0V
EP 4.6V
A 4.6V
AU 4.6V
EP 4.6V
A 4.6V
FP-792 FLEXIBLE
Q1001
Q5408
VIDEO
LIGHT
DRIVE
AU 4.6V
L1553
1
36
VL+
LND754
D001 – 003
(VIDEO LIGHT)
FB4501
RP 4.6V
IC4502
173 CAM DD ON
EEPROM
(6/10)
FB2401
IC2401
V LIGHT PWM
EVF DD ON
ZM RST LED
FC RST LED
LOADING/
DRUM/
CAPSTAN
MOTOR
DRIVE
(5/10)
REC/PB
AMP
(4/10)
CN2403
EVF BLOCK
91
173
55
57
L1551
CN2404
17 8
EP 4.6V
1
5
IRIS DRIVE(+)
TEMP
ZM SENSE
VCC
FOCUS/ZOOM
MOTOR DRIVE
(3/10)
CN1551
4
8
HE
TAPE
LED
D001
T REEL,
S REEL,
SENSOR
H001,002
M2200 MECHA DECK
IC1001
3.3V REG
(10/10)
4
3.3V
LCD902
2
3
1
NSLEEP
B/W
LCD
UNIT
EVF 4.6V
3.3V
CN1501
13
16
18
24
10 12
ZOOM
SENSOR
FOCUS
SENSOR
IRIS
METER
TEMP
SENSOR
CD-471
BOARD
3
L951
5
CAPSTAN
FG
CN1013
EVF DD ON
Q1555
FC SENSE
VCC
SENSOR VCC
TAPE LED (A)
FG VCC
VH+
05
IC5402
A/D, D/A
CONVERTER
(8/10)
V LIGHT PWM
IC1553
3 17
IC5401
AUDIO PROCESS
(8/10)
CAM –7.5V
IC3201
XTAL AMP,
HALL REG
(3/10)
CAM 15V
L3201
IC4501
CAMERA/MECHA
CONTROL
(6/10)
IC1554
IC1552
IRIS DRIVE,
HALL BIAS/GAIN
CONTROL,
HALL AMP
(3/10)
VMR
VH
FLYING
ERASE
OSC
Q3202, 3204, 3205
L3202
L3203
EP 13.5V
CN951
IC951
CCD
IMAGER
LENS BLOCK
3-13
3-14E
M
CONTROL
KEY
BLOCK
(PR-5100)
SE_GND
3
N.C.
2
4
N.C.
PANEL_REV
1
PANEL_REV
4-1
PD-204
BOARD
When the machine needs to be repaired,please refer to
page 1-3 to discriminate the type of LCD(TYPE C or TYPE S).
17
18
19
20
21
22
23
24
VR/VR
VG/VG
VB/VB
VSS/GND
VDD/VSH3V
VSH/VSH5V
2
1
LED
LED_GND
3
5
N.C
4
6
N.C
7
N.C
ND901
BACKLIGHT
6P
REG_GND
XMS_LED
N.C
MS_LED_VDD
KEY_AD1
D_2.8V
KEY_AD3
D_2.8V
KEY_AD2
DIAL_A
DIAL_B
REG_GND
XRESET
12
13
14
15
16
17
18
19
20
21
22
CUSTOM_LED_VDD
7
11
BATT_INFO
6
10
KEY_AD0
5
N.C
D_2.8V
4
XCUSTOM_LED_ON
LI_3V
3
9
N.C
14
13
12
11
10
9
8
7
6
5
4
3
2
1
FC_SENSE_VCC
FC_SENSE_OUT
GND
ZOOM_A
ZOOM_B
ZOOM_XB
ZOOM_XA
IR_SWITCH
IR_SWITCH
FOCUS_A
FOCUS_B
FOCUS_XB
FOCUS_XA
11
10
9
8
7
6
5
4
3
2
1
CAM_15V
GND
RG
H1
H2
GND
V1
V2
V3
V4
9
10
T_REEL(+)
T_REEL(-)
13
14
15
HI8_MP
C_LOCK_SW
16
15
14
13
12
11
10
9
8
7
6
5
FG2
REG_GND
CAP_U
CAP_U
CAP_W
CAP_W
CAP_V
CAP_V
VH+
HU1
HU2
HV1
5
4
3
2
1
GND
GND
GND
6
5
TAPE_TOP(C)
TAPE_END(C)
2
1
PG
E
EVF_4.6V
NSLEEP
3.3V
MIC901
MICROPHONE
L
CN1001 36P
CN1011 16P
14
XSIRCS_SIG
7
REC_RF
15
MT_5V
6
REG_GND
BATT_GND
1
16
MT_5V
5
SWP_DIR
BATT/XEXT
2
ACV_GND
3
ACV_UNREG
4
BATT_SIG
5
BATT_UNREG
6
VC-344 BOARD
4-2
HSYNC
4
VSYNC
VIDEO_IN
5
DIG_GND
7
ANA_GND
XS/S_SW
8
1
VL+
CHARGE_LED_VDD
5
XCHARGE_LED
6
N.C
XCAM_LED
7
8
LANC_OUT
REG_GND
MODE_LED_VDD
10
D_2.8V
11
9
ZOOM_VR
12
REG_GND
13
KEY_AD5
14
XPHOTO_FREEZE
15
XEJECT_SW
16
VIDEO_IN
VSYNC
HSYNC
EVF_4.6V
NSLEEP
3.3V
6
5
4
3
2
1
NC
DIG_GND
7
NC
ANA_GND
8
17
9
1
LM(-)
PG
16
10
2
LM(+)
CN2401 2P
COM
FG
3
15
FG-PG_COM
4
W
W
V
V
U
U
GND
GND
GND
SP1(Y)
SP1(X)
GND
SP2(X)
SP2(Y)
GND
FE(Y)
FE(X)
VH-
HW2
HW1
HV2
HV1
HU2
HU1
VH+
CAP_V
CAP_V
CAP_W
CAP_W
CAP_U
CAP_U
REG_GND
FG2
FG VCC
FG1
M-SW(C)
M-SW(B)
M-SW(A)
DEW
C_LOCK_SW
HI8_MP
REC_PROOF
ME/MP
HALL_COM
T_REEL(-)
T_REEL(+)
SENSOR_VCC
S_REEL(+)
S_REEL(-)
REG_GND
TAPE_LED(A)
TAPE_LED(K)
FG
FP
FG-PG_COM
COM
7
V
8
V
W
9
U
W
10
U
CN2402 10P
6
7
XEVEN(SP2Y)
GND
8
YEVEN(SP2X)
XODD(SP1Y)
9
GND
YODD(SP1X)
10
FE(Y)
1
11
FE(X)
CN3201 11P
VH-
2
17
FG VCC
3
18
FG1
4
19
M-SW(C)
HW2
20
M-SW(B)
HV2
21
M-SW(A)
HW1
22
DEW
CN2403 22P
12
ME/MP
REC_PROOF
11
8
HALL_COM
7
S_REEL(+)
SENSOR_VCC
6
4
TAPE_LED(A)
5
3
REG_GND
2
TAPE_LED(K)
S_REEL(-)
1
TAPE_TOP(C)
TAPE_END(C)
15P
12
VSHT
CN2404
13
GND
CAM_-7.5V
CCD_OUT
FP
8
REG_GND
2
15
LENS_DET
14
1
CN1007 22P
SP(-)
2
16
ZM_SENSE_OUT
FP
SP(+)
2P
17
ZM_SENSE_VCC
13
1
CN1008
18
TEMP
12
BL_LOW
8
N.C
PD-124
HARNESS
N.C
19
TEMP
FP
9
20
IRIS_DRIVE(-)
FFC-005
FLEXIBLE
FLAT CABLE
10
(FOR CHECK)
11
N.C
21
IRIS_BIAS(-)
10
BL_HIGH
22
IRIS_HALL(-)
14
23
IRIS_BIAS(+)
4-2. SCHEMATIC DIAGRAMS
CN6003 10P
16
REG_GND
CLR/CTR
REG_GND
HCNT/SPD
VIDEO_I/O
MCLK/CLD
22
15
EEP_SCK
15
14
PB_RF
1
REG_GND
OE/PSS2
2
AUDIO_R_I/O
21
SRT/PSS1
AUDIO_L_I/O
20
13
19
12
BPF_MONI
VBC/CLS
CAP_FG
3
STBYB/RES
4
AV_JACK_IN
11
SIRCS_PWM/IR_DRV_EN
18
10
17
RESET/EX2
REG_GND
9
VCOM/VCOM
8
9
PB_RF
8
TRV260
/TRV265/TRV265E
9
GSRT/MO2
SE_GND
1
LANC_IN
STBYB/PSG
BL_REG
2
XLANC_PWR_ON
12
7
CN6005
BL_GND
EEP_SO
13
VREF2
6
TPA
BL_CONT
14
LIA2
9
GRES/EX1
4
CN1501 14P
24
IRIS_HALL(+)
CN1551 24P
IRIS_DRIVE(+)
D
GPCK/MO1
NTPA
3
LIA1
8
28
5
USB_DET
3
4
7
29
4
36
PANEL_B
30
LIA2
3
1
PANEL_G
LIA1
VREF2
N.C./SPS
USB_DET
5
EEP_SI
2
TPB
6
XCS_EEP
15
VGL/VGL
USB_D+
2
PANEL_R
16
VREF1
VSS/GND
35
8
VDD/VGLAC
USB_D-
2
PANEL_XVD
INT_MIC_R
6
VGH/VGH
34
USB_D+
7
INT_MIC_L
5
31
1
3
NTPB
8
4
32
2
USB_D-
1
C-SYNC/XHD
33
VREF1
BL_REG
REG_GND
CN751 4P
9
XVTR_LED
INT_MIC_L
INT_MIC_R
SE_GND
33
3
4
4
NTPB
REG_GND
7
BL_GND
32
CPC
BL_CONT
5
1
SE_GND
5
10
5
TPB
NTPB
XCS_LCD_DA
A_2.8V
6
31
24P
6
11
PANEL_B
6
10
A_2.8V
PANEL_G
REG_GND
TPB
REG_GND
7
30
S_C_I/O
8
7
26
PANEL_R
TPA
REG_GND
11
PANEL_XVD
NTPA
29
XS_JACK_IN
S_C_I/O
9
REG_GND
28
8
S_Y_I/O
25
C-SYNC/XHD
27
9
TPA
24
12
10
10
NTPA
23
13
XCS_LCD_DA
CN752 5P
14
S_Y_I/O
XS_JACK_IN
VD_SCK
VIDEO_I/O
11
16
11
17
6
VD_SCK
18
REG_GND
VD_SO
AUDIO_L_I/O
AUDIO_R_I/O
12
D_2.8V
12
13
VD_SO
24
PANEL_HOLD
D_2.8V
REG_GND
XF_TALLY_LED
VD_SI(HDO)
12
13
25
14
XF_TALLY_LED
15
MIC_GND
13
MIC_GND
3
14
2
34
15
35
REG_GND
1
2
3
4
INT_MIC_L
MIC_GND
VD_SI(HDO)
19
1
PANEL_HOLD
20
AV_JACK_IN
2
PANEL_-15.3V
SIRCS_PWM/IR_DRV_EN
3
GND
CCD_OUT
16
21
CAM_-7.5V
PANEL_2.8V
22
MT_5V
4
17
23
MT_5V
11
5
VSHT
PANEL_4.6V
26
CAM_15V
18
XSIRCS_SIG
10
6
PANEL_13.5V
A_2.8V
27
7
GND
19
A_2.8V
8
RG
16
TRV255E
4
MIC_GND
10
PANEL_-15.3V
5
3
1
9
H1
AD5
SI-041
BOARD
2
XPOWER_SW
36
H2
20
H
REG_GND
VL+
11
GND
17
D+
GND
F
XMODE_SW
CN754 36P
12
V1
PANEL_2.8V
D-
3
GND
C
13
V2
18
VCC
2
R
CD-471
BOARD
14
V3
PANEL_4.6V
4
CN753 4P
B
V4
19
1
INT_MIC_R
LENS
BLOCK
5
PANEL_13.5V
20
K
VL+
REG_GND
FP-792
FLEXIBLE
BOARD
4
CN1003 20P
I
3
AD5
DV
OUT
2
CN6004
L
CN6001 20P
J
(USB)
REG_GND
1
FP-796 FLEXIBLE
LND757
G
LND754
A
LND763
DCR-TRV255E/TRV260/TRV265/TRV265E
4-3. PRINTED WIRING BOARDS
SECTION 4
PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
4-1. FRAME SCHEMATIC DIAGRAMS
18
19
M2200 MECHANISM DECK
20
21
FRAME SCHEMATIC DIAGRAM
CN951 14P
EVF BLOCK
LCD902
B/W
LCD
UNIT
LM
CN1013 8P
1
2
3
6
FP-797
FLEXIBLE
CN1009 16P
CONTROL
KEY
BLOCK
(SS-5100)
CN4001 6P
BT901
BATTERY
TERMINAL
ID
GND
DV
LCD901
2.5INCH
COLOR
LCD UNIT
SP901
SPEAKER
CONTROL
KEY
BLOCK
(CF-5100)
Note: CN6004 Pin Name A/B
A: TYPE C MODEL
B: TYPE S MODEL
N
05
FRAME
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2. SCHEMATIC DIAGRAMS
Link
CD-471 BOARD (CCD IMAGER)
VC-344 BOARD (1/10)
VC-344 BOARD (9/10) (DC CONTROL)
(A/D CONVERTER, TIMING GENERATOR)
VC-344 BOARD (10/10) (CONNECTOR)
VC-344 BOARD (2/10)
PD-204 BOARD
(DV SIGNAL PROCESS, LENS CONTROL, DV INTERFACE, VIDEO OUT)
(LCD DRIVER, BACKLIGHT DRIVE)
VC-344 BOARD (3/10) (LENS DRIVE)
SI-041 BOARD (JACK)
FP-792 FLEXIBLE BOARD
VC-344 BOARD (4/10) (REC/PB AMP)
FP-228, FP-299, FP-300, FP-301, FP-302,
FP-802 FLEXIBLE BOARD
VC-344 BOARD (5/10) (SERVO)
CONTROL KEY BLOCK (SS-5100)
VC-344 BOARD (6/10)
(CAMERA/MECHA CONTROL)
CONTROL KEY BLOCK (PR-5100)
VC-344 BOARD (7/10) (HI CONTROL)
CONTROL KEY BLOCK (CF-5100)
VC-344 BOARD (8/10) (AUDIO PROCESS)
COMMON NOTE FOR SCHEMATIC DIAGRAMS
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2. SCHEMATIC DIAGRAMS
4-2. SCHEMATIC DIAGRAMS
THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS
(In addition to this, the necessary note is printed in each block)
(For schematic diagrams)
• All capacitors are in µF unless otherwise noted. pF : µ
Link
µF. 50 V or less are not indicated except for electrolytics
and tantalums.
• Chip resistors are 1/10 W unless otherwise noted.
kΩ=1000 Ω, MΩ=1000 kΩ.
• Caution when replacing chip parts.
New parts must be attached after removal of chip.
Be careful not to heat the minus side of tantalum
capacitor, Because it is damaged by the heat.
• Some chip part will be indicated as follows.
Example
C541
L452
22U
10UH
TA A
2520
1. Connection
Pattern box
1m
Front of the lens
Kinds of capacitor
Case size
External dimensions (mm)
• Constants of resistors, capacitors, ICs and etc with XX
indicate that they are not used.
In such cases, the unused circuits may be indicated.
• Parts with ★ differ according to the model/destination.
Refer to the mount table for each function.
• All variable and adjustable resistors have characteristic
curve B, unless otherwise noted.
• Signal name
XEDIT → EDIT
PB/XREC → PB/REC
• 2: non flammable resistor
• 5: fusible resistor
• C: panel designation
• A: B+ Line
• B: B– Line
• J : IN/OUT direction of (+,–) B LINE.
• C: adjustment for repair.
• A: VIDEO SIGNAL (ANALOG)
• A: AUDIO SIGNAL (ANALOG)
• A: VIDEO/AUDIO SIGNAL
• A: VIDEO/AUDIO/SERVO SIGNAL
• A: VIDEO/SERVO SIGNAL
• A: SERVO SIGNAL
• Circled numbers refer to waveforms.
(Measuring conditions voltage and waveform)
• Voltages and waveforms are measured between the
measurement points and ground when camera shoots
color bar chart of pattern box. They are reference values
and reference waveforms.
(VOM of DC 10 MΩ input impedance is used)
• Voltage values change depending upon input
impedance of VOM used.)
Note :
A B
Red
Blue
White
Magenta
H
Cyan
Green
Yellow
2. Adjust the distance so that the output waveform of
Fig. a and the Fig. b can be obtain.
A=B
B A
Fig. a (Video output terminal output waveform)
Fig.b (Picture on monitor TV)
When indicating parts by reference number, please
include the board name.
Note :
The components identified by mark 0 or
dotted line with mark 0 are critical for safety.
Replace only with part number specified.
4-5
Les composants identifiés par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
le numéro spécifie.
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2. SCHEMATIC DIAGRAMS
CD-471 BOARD
For Schematic Diagram
• Refer to page 4-41 for printed wiring board.
1
2
3
CD-471 BOARD
A
1
6
5
4
2
IC951 1 REC
CCD IMAGER
7
3
IC951 2 REC
7.6 Vp-p
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
R:REC MODE
P:PB MODE
IC951 3 REC
22 Vp-p
V
7.6 Vp-p
V
V
LND951
C954
XX
11
10
6
5
VSHT
4
CAM-7.5V
3
GND
2
CCD_OUT
1
R11.5/P0
R-0.3/P0
R-0.3/P0
VL
SUB
NC
VDD
13
12
11
10
9
8
D951
XX
5
IC951 7 REC
H
C957
XX
C951
22u
16V
C952
XX
R953
3300
22 Vp-p
C955
0.1u
H
Q951
2SC4178-F13F14-T1
BUFFER
R952
82
IC951 q; REC
R968
XX
R15/P0
L951
100uH
SIGNAL PATH
V
9
R970 0
E
R15.0/P0
GND
CAM_15V
14
R10.2/P0.1
(PAGE 4-9)
R969
XX
RG
7
R-7.6
/P0.4
RG
H1
8
THROUGH THE FFC-005
FLEXIBLE FLAT CABLE
R12.5
/P0
9
H1
IC951 4 REC
1.7 Vp-p
ICX219CKA-43:TRV260
/TRV265
ICX223CKA-43:TRV255E
/TRV265E
R1.6
/P0
H2
CN1501
CCD_OUT
V1
GND
7
GND
CCD IMAGER
IC951
6
NC
IC951
12
5
V1
13
V2
4
V2
14
V3
3
H2
VC-344
(1/10)
V4
2
R1.3
/P0
C
1
V3
CN951 14P
4
22 Vp-p
V4
R-7.2
/P0
R-7.2/P0
B
D
9
8
8
R11.5
/P0
R10.7
/P0
IC951 qs REC
C953
47u
10V
2.4 Vp-p
13.5 MHz
VIDEO
SIGNAL
6
7
IC951 qf REC
IC951 qd REC
Y/CHROMA
3.6 Vp-p
F
3.6 Vp-p
Precautions for Replacement of CCD Imager
• The CD-471 board mounted as a repair part is not equipped
with a CCD imager.
When replacing this board, remove the CCD imager from the
old one and mount it onto the new one.
• If the CCD imager has been replaced, carry out all the
adjustments for the camera section.
• As the CCD imager may be damaged by static electricity from
its structure, handle it carefully like for the MOS IC.
In addition, ensure that the receiver is not covered with dusts
nor exposed to strong light.
REC
H
H
05
4-7
4-8
CD-471
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2. SCHEMATIC DIAGRAMS
VC-344 BOARD SIDE A
VC-344 BOARD SIDE B
For Schematic Diagram
• Refer to page 4-43 for printed wiring board.
1
2
5
4
3
6
7
1
VC-344 BOARD (1/10)
A
9
8
10
11
12
14
13
15
IC1501 5 (X1501) REC/PB
1.7 Vp-p
AD CONVERTER,TIMING GENERATOR (CAM BLOCK)
27 MHz
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
R:REC MODE
P:PB MODE
∗:IMPOSSIBLE TO MEASURE THE
VOLTAGE AT THE MARKED POINTS.
CAM_-7.5V
CAM_15V
B
A_2.8V
1
D_2.8V
(9/10)
A_4.6V
FB1501
0uH
REG_GND
R1532
0
D1501
1SV329(TPL3)
2
R1523
0
C1509
0.01u
C
R1504
XX
1
V3
2
XSHP
V3
XSHD
V2
V2
3
V1
4
GND
5
V1
R1529
XX
R2.3/P0
R2.3/P0
C1502
0.1u
R0.7/P0
2.8
E
2.8
CD-471
CN951
H2
6
R1.6/P0
THROUGH THE
FFC-005 FLEXIBLE
FLAT CABLE
H1
7
RG
8
R1.4/P0
GND
(PAGE 4-7)
CAM_15V
9
10
∗
1.5
6
5
4
3
2
1
TEST
CK
VSS2
OSCO
OSCI
VSS1
PBLK
CLPDM
1.3
2.8
7
CHCK
1.5
V4
8
C1526
XX
ID
VSS3
CKCONT1
XSHP
CKCONT2
XSHD
AVD
XRS
AHD
VDD6
IC1501
VDD3
DSGAT
TIMING GENERATOR
IC1501
CXD2444AR-T4
VDD4
H1
XV1
RST
SEN
H2
SSI
VSS4
SSK
NC
2.8
R2.7/P0
R2.6/P2.8
2.8
R2.8/P0
R0.1/P0
2.8
2.8
XCS_TG
0.1
CAM_SO
XRST_VTR
NC
R-7.2/P0.3
XSHT
CS_CH
CH_SO
SSO
VGAT
CAM_SO
XSG1
14
V4
13
VM
GND
CCD OUT
XCS_TG
CH_SCK
CAM_SCK
2.7
5
(6/10)
CAM_SCK
VL
12
C1503
22p
V3
CAM_-7.5V
C1501
22p
R-0.3/P0
V2
R-0.3/P0
V1
R15.1/P0
VH
F
11
1
R1.4/P0
VSHT
VSHT
3
(6/10)
VDD2
RG
R1525
XX
CAM_DD_ON
37 38 39 40 41 42 43 44 45 46 47 48
V4
24 23 22 21 20 19 18 17 16 15 14 13
2.8
CN1501 14P
9
VDD1
13.5 MHz
D
R1526
XX
R2.8/P0
12 11 10
SYSCK
3.0 Vp-p
(3/10)
FREQ_TUNE
IC1503
XX
R2.3/P0
IC1501 qs REC/PB
INOUT
R1505
XX
VICK(CL)
2
IN+
VCC
VSS
2
R1512
470k
3
C1512
0.01u
X1501
27MHz
R1524
XX
5
C1507
4.7u
FREQ_TUNE_OUT
4
C1510
4p
XCS_TG
CS_CH
CH_SCK
CH_SO
CAM_SCK
4
(6/10)
CAM_SO
CAM_SI
CAM_SI
0
2.6
R2.8/P0
V4
V3
VSHT
C1504
0.22u
V2
G
V1
R1503
100k
TG_VGAT
CAM_SI
R1509 1M
R-7.2/P0
C1511
0.1u
C1527
2.2u
R-7.6/P0
R1530
XX
R-7.2/P0
25 26 27 28 29 30 31 32 33 34 35 36
TG_ZV1
TG_ZSG1
TG_ID
TG_AVD
TG_AHD
FE_CLPOB
VCK
7
H
AD0
AD1
AD2
AD3
AD4
AD5
AD6
AD7
FB1504
0uH
AD8
AD9
(2/10)
AD9
L1501
10uH
AD8
AD7
AD6
1
AD4
D9
0
D8
R0.6/P0
D7
R0.9/P0
D6
R1.1/P0
D5
R1.9/P0
D4
R1.1/P2.8
D3
R1.2/P2.8
D2
R1.1/P0
D1
R1.1/P0
D0
R1.1/P0
TEST
AD5
AD3
12 11 10
DVDD
I
2.8
13
14
DVDD
DVDD
19
PBLK
20
CLPOB
21
XSHP
22
XSHD
REFN
39
23
CLPDM
REFP
38
AVDD
H
C1513
XX
VIDEO
SIGNAL
LatchSelect
44
HDRST
43
AVSS
42
AVSS
41
AVDD
40
AVSS
LINE
2.8
CS_CH
AD1
AD0
2.8
2.8
R0.9/P0
C1532
1u
6.3V
R1.9/P0
R1.4/P0
37
CHROMA
R1521
47
R1531
XX
2.8
C1523
0.1u
C1524
22u
4V
C1514
XX
C1531
XX
Y/CHROMA
2.8
R2/P0
R1.9/P0
C1530 1u
REC
45
R1533 33k
R1.9/P0
2.8
SIGNAL PATH
L
CH_SO
25 26 27 28 29 30 31 32 33 34 35 36
R1.9/P0.1
K
SYSV
CMLEVEL
AVDD
C1525
1u
L-
24
C1529
XX
AVSS
1.7 Vp-p
L
2.8
CCD IN
R2.8/P0
0
47
46
S/H,AGC,A/D CONVERTER
IC1502
HD49337AFEB
CH_SCK
2.8
XCE
IC1502
AD2
48
18
L2+
IC1502 e; REC
XSCK
SI
L1+
3
R2.3/P0
2
17
R2.7/P2.8
R2.3/P0
3
ADCLK
2.8
XSHD
4
16
R2.3/P0
XSHP
5
DRVSS
AVDD
J
6
DVSS
2.8
R1506
XX
7
15
1.5
C1528
XX
DRVDD
AVSS
C1508
1u
8
9
C1516
0.01u
C1518
1u
C1515
0.22u
05
VC-344 (1/10)
4-9
4-10
AD9
AD8
AD7
AD6
AD5
AD4
AD3
AD2
AD1
AD0
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2. SCHEMATIC DIAGRAMS
VC-344 BOARD SIDE A
VC-344 BOARD SIDE B
For Schematic Diagram
• Refer to page 4-43 for printed wiring board.
1
2
4
3
5
6
7
8
9
10
12
11
13
14
16
15
17
19
18
20
22
21
23
24
VC-344 BOARD (2/10)
A
DV SIGNAL PROCESS,LENS CONTROL,STEADYSHOT,DV INTERFACE,VIDEO OUT (JC BLOCK,IO BLOCK)
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
R:REC MODE
P:PB MODE
D_1.5V
D_1.9V
B
8
A_2.8V
C3357
0.01u
D_2.8V
(9/10)
FB3303
REG_GND
LBUS1
43
LBUS0
44
RAM VSS1
14
LD SENSE0
15
LD SENSE1
R1.4/P0
LD IRIS
6
XRST_PHY
ZM_RST
IRIS_COM
XCS_SFD
16
XCS_SFD
R3396 XX
XCS_VFD
XCS_VFD
17
18
XCS_VD
2.4
VD_SCK
2.6
XIRQ_GEMINI
XIRQ_GEMINI
ATF_LATCH
153
XOO
152
XOI
151
IODSS2
150
FRL
149
FCLR
148
R3399
XX
7
IC3301 <zcz REC/PB
OSD XSC OSD1
20
OSD XSCK OSD2
XUSB_EN
21
VSP_SI
22
BMOSD0(CPY)
VSP_SO
23
BMOSD1(OSDCB)
24
BMOSD2(OSDCR)
25
BMOSD3(OSDY)
26
DVDD0
27
BMOSD4(CPTONE)
28
BMOSD5(PILOT)
29
RAM VDD3
30
OSDHD
31
DVss0
DIR
147
XENA
146
XACC
145
XENA
2.8
XACC
DVDD2
144
TRCKO
143
141
140
1.3
FB3302
C3333
4.7u
YI0
33
YI1
VD_SO
34
XCS_VD
9
AD8
AD7
CI
35
RAM VSS3
2.8
XRST_LINK
ALE
2.8
0
2.8
RDX
WRX
2.8
D24A00
XCS_IC_3302
D26A02
D27A03
D25A01
2.5
2.5
2.5
D29A05
D30A06
DIR
D28A04
2.5
2.8
2.5
2.5
2.5
0
XRESETL
XINT
VDD2
ALE
XRD
XRW
XCS
VSS
DA0
DA1
DA2
DA3
VDD
DA4
DA5
DA6
DA7
VSS
1
2.8
C3339
220p
C3338
1u
R3361
5100
± 0.5%
PLL MODE1
135
PLLVDD0
134
CKO
133
PLLVSS0
132
PHD
131
PVD
130
USB XEN
129
36
SYNCI0
37
SYNCI1
38
CKI54
39
IOVDD0
AD4
VFO_VD
R2.8/P0
40
CKI135
41
SYNCO0(HDO)
42
SYNCO1(VDO)
VFO_OE
1.4
AD3
AD3
R3371 XX
0
R3372 XX
R3365
1500
43
SYNCO2(OEO)
44
RAM VDD4
45
YO0
USBVSS
128
DM
127
IC3301 <zzn REC/PB
C3328
0.1u
48
YO3
49
RAM VSS4
50
YO4
51
YO5
qd
DP
126
USBVDD
125
REX PNL
124
PNL G
123
DACVDD_2
122
PNL R
121
DACVSS_2
120
PNL B
119
DACVDD1
118
REX EVF
113
DACVDD_0
112
C3358
0.01u
21
110
DACVSS0
109
8
7
6
12
3
PANEL_B
Q3303
5 HN4A71FK
(TE85R)
BUFFER
22
BW_Y
0.2
R3330 560
± 0.5%
0.2
R3326 560
± 0.5%
10k
± 0.5%
(10/10)
4
RB3305
2200
RFIN
RFIN
RECA1
RECA1
1.1
R3332
470
± 0.5%
R3315
10k
1
0.5
4
6
qg
0.9
5
2
R3343
680
RECDT
IC6501 qa REC/PB
SFD_BCK
SFD_FCK
0.3
1.7 Vp-p
SFD_LRCK
3
DATA_FROM_SFD
R3316
4700
R3350
270
DATA_TO_SFD
H
C6501
1u
L3313 10uH
SIGNAL PATH
VIDEO SIGNAL
Y
Y/CHROMA
AUDIO
SIGNAL
VIDEO/AUDIO/
SERVO
SIGNAL
4.7
(8/10)
DATA_FROM_SFD
DATA_TO_SFD
S_C_I/O
qh
C6506 1u
SDCout
Cout
Vout
Vsag
GND2
5
6
7
8
R6507
22k
C6504
10u
16V
± 0.5%
26
(10/10)
2.0 Vp-p
H
2.7
4
2.7
SDCin
3
25
(6/10)
IC6501 6 REC/PB
Y/C MIX BUFFER
IC6501
NJM2570AV(TE2)
qj
C6502
0.01u
S_Y_I/O
VIDEO_I/O
IC6501
2
2.7
RB6501
68
C6510
22u
6.3V
Ysag
2.3
V+2
Yout
VREF
POWERSAVE
Yin
9
1
0
L3320
10uH
R6509 10k
C3320
0.01u
24
SFD_LRCK
SDC_ON
2.3
2.8
2.4
4.7
V+1
IREF
L3305
10uH
C3345
0.1u
0
C3314
4.7u
N
C3321
4.7u
C3322
4.7u
C3319
4.7u
C3341
4.7u
C3344
0.1u
C3310
4.7u
SFD_FCK
VOUT_ON
C6509
100u
4V
2.8
2.8
2.8
2.8
R2.8/P0.9
1.1
VFO_OE
VFO_OE
SFD_BCK
L6501
10uH
RFIN
RECCK
RECDT
VFO_VD
VFO_VD
RECA2
RECA1
SFD_FCK
15
SFD_BCK
DATA_TO_SFD
IRIS_COM
(4/10)
RECDT
16 15 14 13 12 11 10
SFD_LRCK
ZM_RST
IRIS_COM
DATA_FROM_SFD
FC_RST
ZM_RST
2.8
R2.8/P1.9
2.8
1.5
2.8
R1.4/P0
R2.7/P0
R2.7/P0
FC_RST
2.8
2.8
0.9
1.4
1.4
0.7
0.7
LD_EN1
23
RECCK
RECCK
Q3308
UP04401008S0
BUFFER
LD_EN0
LD_EN1
RECA2
RECA2
R3314
55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108
LD_EN0
(10/10)
PANEL_G
LD_DIR1B
LD_DIR1B
20
(10/10)
PANEL_R
± 0.5%
± 0.5%
111
YOUT
REFVDD
IOUT
REFVSS
DACVSS
ICOVSS
ADDVSS
VRB
ADAVDD
R2.7/P1.4
RFIN
PBCK
DVDD1
ADDT5
ADDT4
ADDT3
ADDT2
ADDT0
ADDT1
PLLVSS3
TRXOSCOUT
TRXOSCIN
PLL VDD3
PCOR
DVSS1
PLLSW
PLLMSK
RECCK
RECA1
RECA2
R1.3/P0
RECDT
PLL VDD2
POI
PLLVSS2
PCO
IOVDD1
FCKO
BCKO
LRCKO
ADAO2
ADAI2
ADAO1
ADAI1
IOVSS1
CO3
CO2
CO1
CO0
SCAN EN
TP TEST
IC TEST
LD_DIR1A
56
1
H
DACVDD
IOVSS0
ICOVDD
54
TG_AHD
LD_DIR0B
114
COUT
H
ADDVDD
YO7
LD_DIR0A
LD_DIR1A
R3335 560
0.3
TG_AHD
LD_DIR0B
115
REX C
REX Y
TG_AVD
TG_AVD
DACVSS_1
YO6
53
RB3307
R3313 10k
0.2
0.5
420 mVp-p
VRT
VCK
USB
1
2.8
ADAVSS
52
116
IC3301 <zz/ REC/PB
TG_ZV1
LD_DIR0A
3.3 USB
1
qf
VCK
C3331
10u
16V
117
EVFOUT
170 mVp-p
TG_ZSG1
TG_ZV1
USB
RB3304
4700
R0.1/P0
IC3301 <zzc REC/PB
TG_VGAT
TG_ZSG1
USB
USB
2.8
H
TG_ID
TG_ID
TG_VGAT
USB
L3307
10uH
0.2
330 mVp-p
H
YO1
YO2
USB
USB
2.8
qs
440 mVp-p
FE_CLPOB
FE_CLPOB
USB
R1/P0
47
USB
USB
PANEL_VD
0
IC3301 <zz. REC/PB
AD0
AD0
USB
PANEL_HD
XUSB_EN
0
1.5
46
19
(6/10)
0
USB_D-
2.8
AD1
AD1
Q3307
UNR31A300LS0
USB PULLUP
USB_D+
CL3301
18
(5/10)
3.7
2.8
H
AD2
SPCK
C3336
0.1u
XUSB_ON
0
0
H
qa
C3335
0.01u
2.8
IC3301 <zxz REC/PB
2.8
AD5
AD4
CHROMA
136
490 mVp-p
AD6
AD2
(6/10)
AVS
2.6
q;
470 mVp-p
AD7
AD5
M
PLL MODE0
IC3301 <zxc REC/PB
AD9
AD6
(3/10)
TEST6
C3332
0.01u
XCS_VD
AD9
14
137
0.8
32
138
V
VD_SO
AD8
L
60
1.5
2.8
IC3301
CXD3164R
VD_SCK
VD_SCK
139
PLLVSS1
0.8
OSD_V
PLLVDD1
CRCK(20.25MHz)
2.8 Vp-p
DV SIGNAL PROCESS,
D/A CONVERTER,
LENS CONTROL,
STEADYSHOT
1.5
OSD_V
IC3301 <zc/ REC/PB
IC3301
0.8
CAM_SI
(7/10)
K
2
LPS
142
0.2
C3306
0.01u
CAM_SO
CAM_SI
(1/10)
8
1.5
CAM_SO
7
AVD3
0.2
CAM_XCE
CAM_SCK
CAM_SCK
J
TEST5
C3327
0.01u
2.8
XVSP_SCK
(6/10)
3
59
OFR
DVSS2
SPCKO
PLLTHROUGH
H
VSP_SO
CAM_XCE
13
4
AVS
TRCKO
1.4
RAM VSS2
XVSP_SCK
I
5
TPBIAS
TEST4
(10/10)
TPB-
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
VSP_SI
57
AVD3
TEST3
58
DIR
2.8
TPB+
RB3303
56
L3321 10uH
XUSB_EN
H
TEST2
57
C3359
XX
FRL
1.5
2.8 Vp-p
19
56
17
TPA-
2.8
FCLR
2.7
13.5 MHz
ATF_LATCH
L3310 10uH
ALE
RDX
WRX
MCDA0
MCDA1
MCDA2
MCDA3
MCDA5
MCDA4
MCDA6
MCDA7
MCHA0
ATF LATCH
IOVDD2
0
RAM VDD2
R1/P0.2
OSD SI OSD0
R3398
XX
C3326
0.01u
LBUS3
0
2.9 Vp-p
1.5
VD_SO
LINE_OUT_VD
LINE_OUT_VD
18 MHz
2.8
VREF
VREF
IC3301 <zvz REC/PB
LBUS2
154
TPA+
XO
LD EN1
13
LBUS1
155
R3356
12k
± 0.5%
R3353
12k ± 0.5%
0
XI
12
6
VSS
2.8
XRST_PHY
TPB-
9
1.2
0
FC_RST
XRST_LINK
TEST1
VDD3
LD_EN1
OFR
2.9 Vp-p
55
156
2.8
0
OFR
XRST_LINK
LBUS0
10
0
AVS
LD EN0
IC3301 <zvc REC/PB
7
PLLFLT
5
8
TPB+
0
RAM VDD1
11
TRRT
2.8
RAM VSS0
R2.4/P0
LD DIR1A
R0.4/P0
LD DIR1B
10
157
TPA-
TEST0
2.8
LPS
LD_EN0
158
LBUS0
2.8
LBUS1
2.8
LBUS2
2.8
LBUS3
11
15
54
AVD3
C3305
1u
LPS
PLLVSS4
12
R1
0
R0
0.9
TPA+
16
53
ENEC
IC_3302_SLEEP
IC_3302_SLEEP
MCCE
24.57 MHz
1.5
XDVCN
MCHA1
FRRV
TRRV
MCVREF
MCVD
MSCSV
MSCSS
CAM XCE
CAM SYSV
2.6
DVDD3
1.5
XRST
2.8
CS IC_3301
CAM SI
CAM SO
DVSS3
1.2
13
AVD3
IC_3302_SLEEP
17
1.2
2.8
9
159
14
AVD3
XRST_PHY
18
1.2
VSS
8
LD_DIR1B
XDVCN
LCKO
52
VDD2
7
LD_DIR1A
DXXA09
DXXA09
160
TM1
DXXA08
DXXA08
PLLVDD4
2.8
2.4 Vp-p
FCLR
AVS
XDVCN
19
2.8
DV INTERFACE
IC3302
SN104266PN-TEB
TM0
D31A07
6
161
51
2.2
5
LD_DIR0B
D31A07
DRP
C3342
4.7u
LPS
D30A06
D30A06
4
LD_DIR0A
DRP
20
2.8
IC3302
TMP3
C3304
0.01u
1.4
162
50
TMP2
TG_AHD
D29A05
D29A05
SWP
TMP1
D28A04
SWP
1.4
0
TG AVD
R2.7/P0
TG AHD
R2.6/P2.8
LD DIR0A
R1.1/P0
LD DIR0B
IC3301 <zb. REC/PB
49
FRL
VSS
2.8
CNA
0
XRESETP
2.8
PWD
2.8
VDD3
2.2
VDD2
VSS
2.8
XINEN
0
FR
0
OFR
2.7
IFCLEAR
2.8
VDD3
48
XENA
VSS
1.4
ICLK
TMP0
3
TG_AVD
D28A04
47
VSS
RAM VDD0
4
46
TRCKO
2.2
VDD2
2.8
ID3
2.8
ID2
2.8
ID1
2.8
ID0
TEST7
2
XDIR
XIACC
ALE
ATF_LATCH
0.6
0
RDX
D24A00
D25A01
D26A02
D27A03
D28A04
D29A05
D30A06
D31A07
DXXA08
WRX
2.8
2.8
2.5
2.5
2.5
2.5
R0/P2.4
2.5
2.5
2.5
R2/P2.5
R2/P2.6
TRRT
DXXA09
XCS_IC3302
2.8
1.4
1.4
VREF
FRRV
TRRV
0.6
2.8
0.1
VSP_SI
LINE_OUT_VD
VSP_SO
0.1
2.5
XCS_VFD
XCS_SFD
XVSP_SCK
2.7
XCS_IC_3301
2.7
2.5
2.7
0.1
2.6
2.8
42
2.8
D27A03
D27A03
G
CAM SCK
TG TGCKO
MSI TO UCON(VSP SI)
1
1.5
MSSCK
R2.7/P0
MSO FROM UCON(VSP SO)
D26A02
D26A02
GEMINI IRQ
IODSS3
FE ADIN1
R1.1/P0
FE ADIN2
R1.1/P0.1
FE ADIN3
R1.2/P2.8
FE ADIN4
R1.1/P2.8
FE ADIN5
R1.6/P0
FE ADIN6
R1.3/P0
FE ADIN7
R0.5/P0
FE ADIN8
R0.3/P0
FE ADIN9
FE CLPOB
R0.3/P2.8
FE ADIN0
FE CLPDM
D25A01
D25A01
(6/10)
TG ID
R1.4/P0
IOVDD3
D24A00
D24A00
TG ZV1
R0.1/P0
TG ZSG1
R2.8/P0
TG VGAT
TG CHCK
XCS_IC_3302
XCS_IC_3302
F
LBUS2
45
ALE
ALE
12
41
LBUS3
216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163
SWP
SWP
E
0
DRP
DRP
2.7
TRRV
0
1.5
TRRV
2.8
TRRT
2.7
OSD_V
CAM_XCE
CAM_SI
AD9
AD8
AD7
AD6
AD5
AD4
AD3
AD2
AD1
CAM_SCK
XIRQ_GEMINI
R3397 1k
TRRT
D
AD0
FE_CLPOB
TG_ID
TG_VGAT
FRRV
FRRV
TG_ZSG1
RDX
RDX
TG_ZV1
VCK
WRX
WRX
CAM_SO
XCS_IC_3301
XCS_IC_3301
VDD3
C3309
0.01u
(10/10)
2.2
40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21
C3307
XX
FRRV
GND
11
2.8
C3313
0.01u
XRST_VTR
(6/10)
2.5
FB3301
Cin
10
C
XACC
USB_3.3V
0
9
(10/10)
D31A07
A_4.6V
IC6501 5 REC/PB
830 mVp-p
C6511
22u 6.3V
C6512
100u 4V
C6507
0.1u
H
C6503
0.01u
O
REC
REC
PB
REC/PB
PB
Ref.signal
05
4-11
4-12
VC-344 (2/10)
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2. SCHEMATIC DIAGRAMS
VC-344 BOARD SIDE A
VC-344 BOARD SIDE B
For Schematic Diagram
• Refer to page 4-43 for printed wiring board.
1
2
5
4
3
6
7
9
8
10
11
12
14
13
16
15
VC-344 BOARD (3/10)
A
LENS DRIVE (LD BLOCK,EVR BLOCK)
FB1601
0uH
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
R:REC MODE
P:PB MODE
AU_2.8V
D_2.8V
R1560
10
F
24
IRIS_HALL(+)
23
IRIS_BIAS(+)
22
IRIS_HALL(-)
21
IRIS_BIAS(-)
20
IRIS_DRIVE(-)
19
TEMP
18
TEMP
17
ZM_SENSE_VCC
16
ZM_SENSE_OUT
15
LENS_DET
14
FC_SENSE_VCC
13
FC_SENSE_OUT
12
GND
11
ZOOM_A
10
ZOOM_B
9
ZOOM_XB
8
ZOOM_XA
7
IR_SWITCH
6
IR_SWITCH
5
FOCUS_A
4
FOCUS_B
3
FOCUS_XB
2
FOCUS_XA
1
A_IN-
B_OUT
A_IN+
B_IN-
Vcc
8
1
4.8
A_OUT
2
0.9
3
0.9
1.9
FREQ_TUNE_OUT
7
C1572 XX
R1576 10k
1.2
0.9
IN1-
IN1+
OUT1
0.9
4.8
0.9
4
B_IN+
FREQ_TUNE
(1/10)
0.6
R0.1
/P0
R0.6
/P0
0.1u
C1576 XX
0.6
C1575
IN40.1
GND
R1583
330k
IN3+
2
1
C1574
0.1u
OUT4
IN3-
IN4+
OUT3
10 11 12 13 14
R1564
220k
R1584
470k
Q1554
2SC584600LS0
HALL BIAS
C1565
0.47u
C1566
0.01u
C1568
2200p
IRIS_COM
R1577
47k
R1578
XX
IRIS_PWM
RB1551
22k
C1569
XX
2.8
LENS_DET
2
6
1
2.8
3
4
Q1555
UP04116008S0
FOCUS/ZOOM
SENSOR SWITCH
R-0.3/P-1.4
-0.6
H
9
C1558
0.1u
LENS BLOCK
G
R1581
22k
± 0.5%
R1575 1k
24P
IRIS_DRIVE(+)
OUT2
C1559
0.1u
R1563
10k
C1571
4.7u
R1582
10k
± 0.5%
R1573
330
CN1551
R0.8
/P0
R1562
2200
1
8
R0.8/P0
Q1551
DTC113TMT2L
IRIS DRIVE
2
IC1552
LM224PT
470k
1
D1552
XX
3
R0.1/P0
R2/P2.8
R1585
XX
4
1.1
R1561
1M
C1577
XX
E
IRIS DRIVE,
HALL BIAS/GAIN
CONTROL
HALL AMP
C1556
4.7u
C1554
4700p
5
R1566
D1551
MA111-(K8).S0
IC1552
C1552
0.01u
6
IN2-
7
2
IC1554
HALL REG,XTAL AMP
IC1554
NJM12904V(TE2)
6
4
1.2
R1.1/P0.3
D
MT_5V
0.8
0.9
AO1
Vcc
AO2
LD
GND
AO3
R1.1/P0.1
DI
CLK
REG_GND(MT_GND)
C1567
XX
1
3
0
REG_GND
C1573
0.001u
2
5
2.6
DA_STRB
VCC
6
CAM_SCK
GND
7
0.1
8
C
CAM_SO
R1570
470k
(9/10)
A_2.8V
C1564
0.001u
C1560
470p
2.8
28
A_4.6V
R1565
470k
EVR
(D/A CONVERTER)
IC1601
BH2220FVM-TR
0.9
DA_STRB
IN2+
DA_STRB
L1553
10uH
5
IC1601
CAM_SCK
R1568
6800
C1562
0.22u
R1.1/P0.3
CAM_SCK
(6/10)
R1567
2200
CAM_SO
CAM_SO
1
27
B
RB1552
1k
C1601
4.7u
5
29
(6/10)
ZM_RST_LED
2.8
FC_RST_LED
L1551 10uH
LENS_TEMP_AD
XNS_SW
R2.4/P2.8
0
R0.4/P2.8
0
1
1.1
5
2.8
RB1553
47k
R0.5/P1.1
LENS BLOCK is replaced as block,
so that there PRINTED WIRING BOARD
and SCHEMATIC DIAGRAM are omitted.
R0.6/P1.2
HALL_AD
•
IN3
EN3
IN4
EN4
OUT4B
PGND
OUT3B
IC1553
UPD16877MA-6A5-E2
IN1
9
EN2
VM4
8
IN2
OUT4A
7
EN1
PGND
6
R2.8/P0
2.7
10 11 12
R2.8/P0
5
OUT3A
5
R2.5/P2.8
OUT2A
4
R0.7/P1
PGND
3
R0.1/P1
OUT 1A
2
R0.8/P1.1
5
1
0.1
C1561
0.01u
C1563
47u
6.3V
VM1
FOCUS/ZOOM
MOTOR DRIVE
J
VM23
OUT2B
VDD
OUT1B
IC1553
PGND
24 23 22 21 20 19 18 17 16 15 14 13
I
ZM_RST
FC_RST
LD_DIR1B
LD_DIR1A
LD_EN1
LD_EN0
K
LD_DIR0A
LD_DIR0B
05
VC-344 (3/10)
4-13
4-14
14
(2/10)
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2. SCHEMATIC DIAGRAMS
VC-344 BOARD SIDE A
VC-344 BOARD SIDE B
For Schematic Diagram
• Refer to page 4-43 for printed wiring board.
1
2
3
4
5
6
8
7
9
C3220
100p
REC/PB AMP (RF BLOCK)
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
R:REC MODE
P:PB MODE
L3203
220uH
R3220
33k
L3204
12uH
C3222
XX
R3225
270
C3219
82p
R2/P4.7
L3202
10uH
6
R1.4/P2.4
C3203
4.7u
30
Y/CHROMA
12
13
5
1
R4.4
/P4.7
VIDEO/AUDIO/
SERVO
SIGNAL
C3223
0.1u
PB
R3229
100
R4.1/P4.7
C3221
150p
R3.8
/P4.7
4
Q3205
2SA1965-S-TL
Q3202,3204,3205
FLYING ERACE
OSC
C3218
100p
R3.6
/P4.8
R1.2/P2.8
RP_2.8V
4.6
3
2
Q3202
UP04601008S0
RP_6.0V
R3226
220
AUDIO
SIGNAL
REC
R3230
56
4
RP_4.6V
(9/10)
VIDEO SIGNAL
Q3204
2SA207800LS0
RB3202
2200
4.7
RB3201
22k
B
11
SIGNAL PATH
VC-344 BOARD (4/10)
A
10
0
REC
R3231
560
REC/PB
PB
Ref.signal
L3201
10uH
REG_GND
C
XME/MP
XFE_ON
C3201
4.7u
Q3203
UNR32A300LS0
SWITCH
2.8
R3232 10k
C3211
0.01u
D
R3210
22k ± 0.5%
C3214
0.01u
R3212
12k ± 0.5%
R3214
13k ± 0.5%
R3216
5600 ± 0.5%
R3233
10k
22k ± 0.5%
R3219
22k ± 0.5%
0.1
wa
IC3201 3,4,9,q; REC
R5.9/P0
13.3 msec
2.8
0
0
0
0
0
C3217
0.01u
4.8
1.4
R0/P1.7
C3213
6800p
4.7 Vp-p
R0/P2.3
R0/P2.2
C3212
6800p
13.3 msec
PB_X_OUT
26
GND
M2200
MECHANISM
DECK (1/2)
XME/MP
VCC_HEAD
REC_PEAK_T
REC_IR_ME
REC_IR_MP
REC_PEAK_I_MP
25
REC_PEAK_I_ME
C3204
0.01u
VCC_REC_4.6V
540 mVp-p
PB_IR
CE
IC3201 eg PB
PB_FBDP
E
CO
24 23 22 21 20 19 18 17 16 15 14 13
qk
CN3201 11P
GND
12
D1O
11
R4.7/P2.7
C3210
0.01u
R2/P1.7
27
PB_Y_OUT
XO
10
28
PB_RF_IN
YO
9
29
VCC_PB_4.6V
D2O
8
RF_MON
R3235
22k
RFIN
GND
IC3201
32
AGCTC_Ech
AGC_EVR
6
D2E
5
35
PB_RF_OUT
YE
4
XE
3
D1E
2
1
LPF_f0
GND
(1.35V)
XEVEN(SP2X)
7
YEVEN(SP2Y)
6
GND
5
R3223 220
± 0.5%
YODD(SP1Y)
4
XODD(SP1X)
3
GND
2
GND
1
GND
CH
SP2
CH
SP1
R3224 220
1
± 0.5%
TEST
VCC_D2.8V
REC_DATA
MODE2
C3206
0.01u
16V
REC_CLK
1.3
MODE1
R3236
XX
GND
8
R2/P1.7
36
R3237
XX
9
FLYNG
ERASE
R2/P1.7
RECDT
RECDT
7
GND
R0.4/P0
C3202
0.01u
FE(Y)
R2/P1.7
(1.04V)
REC_A2
RECCK
AGCTC_Och
34
VCC_2.8V
RECA2
RECA2
RECCK
33
REC_A1
RECA1
GND
R2/P1.7
CTRL1
RECA1
REC/PB AMP
IC3201
CXA3619R-T4
SW_PS
23
(2/10)
TEST_OUT
31
± 0.5%
R3222 220
R3.5/P2.1
R3234 12k
G
30
R1.8/P0.9
C3208 0.47u
C3205
R3.5/P2.1
0.47u
± 0.5%
R2/P1.7
4.8
(10/10)
R3221 220
R2/P1.7
CTRL0
F
FE(X)
10
R2/P1.7
R1.8/P2.6
31
11
IC3201 ek REC/PB
2.9
0
2.9
0
0
2.9
0
2.9
1.5
R2.8/P0
ql
R2.8/P0
37 38 39 40 41 42 43 44 45 46 47 48
w;
IC3201 rf REC
1.0 Vp-p
2.8 Vp-p
H
SW_PS
RECDT
RECCK
XME/MP
RECA2
XME/MP
XFE_ON
RECA1
13.3 msec
XFE_ON
SW_PS
41.85 MHz
SW_PS
32
C3215
0.01u
(6/10)
I
RF_SWP
ALL_PS
05
4-15
4-16
VC-344 (4/10)
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2. SCHEMATIC DIAGRAMS
VC-344 BOARD SIDE A
VC-344 BOARD SIDE B
For Schematic Diagram
• Refer to page 4-43 for printed wiring board.
1
2
4
3
VC-344 BOARD (5/10)
A
6
5
7
8
9
10
11
13
12
14
16
15
17
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
R:REC MODE
P:PB MODE
∗:IMPOSSIBLE TO MEASURE THE
VOLTAGE AT THE MARKED POINTS.
SERVO (MD DRIVE BLOCK)
EP_13.5V
VTR_UNREG
D_2.8V
33
B
(9/10)
REG_GND (MT_GND)
MT_5V
CAP_VS
DRUM_VS
REG_GND
C2414
0.1u
C2413
0.1u
R2440
XX
C2422
1u
6.3V
C2416 C2417
0.1u
0.1u
C2433
0.1u
10V
C2423
0.1u
10V
R2441 XX
MODE_SW_A
C2428
0.1u
10V
C2438
0.1u
10V
MODE_SW_A
DEW_AD
DEW_AD
FB2401
R2402
330k
LM_LM_+
R2401
47k
34
R2421
2.2
R2419
2.2
R2436
XX
MODE_SW_C
MODE_SW_C
R2422
2.2
MODE_SW_B
MODE_SW_B
C
CAP_ON
DRUM_W
CAP_W
DRUM_V
(6/10)
CAP_V
HI8_MP_SW
D
DRUM_U
HI8_MP_SW
CAP_U
REC_PROOF
wd
IC2401 yd,yg,yk REC/PB
REC_PROOF
ME_SW
ME_SW
XREEL_HALL_ON
M903
LOADING
MOTOR
M
1
LM(+)
2
C2401
0.1u
LM_+
CAP_FWD
C2449
XX
C2450
XX
5
NC
D_V
1.7
D_VS
3.4
D_U
1.8
NC
NC
L_VM
NC
C2403
0.001u
50V
L_OUT1
0.2
D_W
1.7
D_VS
3.4
NC
2P
LM(-)
L_OUT2
CN2401
C_W
0.6
C_VS
1.2
C_V
0.6
C_VS
1.2
C_U
0.6
L_PGND
E
450 Hz
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61
RB2401
10k
LM_-
0.2
2.8
3.2 Vp-p
C2402
0.1u
R2404
270
CAPON
M2200
MECHANISM
DECK(2/2)
R2437
XX
C2434
0.001u
2.8
MR_VCC
2.7
CAP_FG
1.4
1
C_FRC
2
TEST
3
VMR
ws
D_PGND
60
COM
59
WIN
58
IC2401 4 REC/PB
C2439
0.001u
wf
C2431
0.001u
1.8
IC2401 td REC/PB
2.8 Vp-p
DRUM_COM
1.8
2.8 Vp-p
VIN
57
UIN
56
DFILTER
55
CFGIN+
DFC
54
CFGINCAGC
DFGOUT
53
DFGIN
52
4
CFGOUT
5
C_PGND
6
GND
7
8
450 Hz
1.8
1.8
R2405
XX
∗
FG2
C2406 1u
UHE-
0.6
VHE+
0.4
V-
14
W+
15
W-
C2409
0.01u 16V
DRUM_U
10
16
VCC1
17
VH
18
TOPIN
19
TOPOUT
wg
8
43
CAP_V
9
CAP_V
10
(CAPSTAN MOTOR)
CAP_W
11
(PAGE 4-33)
CAP_W
12
MECHANISM
BLOCK
0.4
42
wh
IC2401 rf REC/PB
100 mVp-p
41
13 sec
S_REEL_+
∗
18
SPCK
(2/10)
R2438
XX
C2415
0.01u
16V
CAP_V
CAP_W
C2440
0.1u
16V
C2437
0.1u
16V
0.4
CBOUT
HE_VCC
I
R2435
XX
C2430
1u
6.3V
C2426
XX
RLDO2
RLO2
RLM2
1.1
VH+
44
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
TAPE_END
2.8
7
1.1
UHEUHE+
HU1
RLP2
VHE+
RLDO1
C2407
0.047u
10V
VHE-
RLO1
6
WHE+
∗
5
45
DBIN
CBIN
1.1
HV1
HU2
16V
C2429 0.022u
13.3 msec
RLM1
4
DBOUT
CBLOUT
ENDIN
TAPE_END_C
RLP1
3
HV2
46
0.4
ENDOUT
2
HW1
47
1.2
2.8 Vp-p
1.2
HW2
48
VG
1.1
IC2401 t; REC/PB
WHE-
H
DRUM_PG_SENS
CSR
1
PGC
ISNF
1.2
20
VH-
DRUM_PG
FB2403
13.6
2.8
TAPE_TOP_C
FG_PG_COM
0.9
1.2
TAPE_TOP
FB2402
0.1
2.8
0.7
HE_VCC
CN2403 22P
49
0.1
WHEU
13
0.1
WHE+
50
1.2
DGND
DRUM_V
51
PGIN
R2428
10k
0.6
9
VREF
PGOUT
DRUM_FG_SENS
C2436
50V
470p
0.1
SI
8
IC2401
LOADING/DRUM/CAPSTAN
MOTOR DRIVE
IC2401
TB6550FG(O,EB)
0.1
7
V
V+
XCS
V
U
U-
12
2.8
M901
DRUM
MOTOR
U+
11
0.4
VHE-
G
10
SCK
DRUM_W
1.2
MCK
6
DRUM_FG
R2433 XX
1.3
2.7
5
W
0.6
∗
4
W
UHE+
1.3
COM
1.4
0.4
9
DRUM_COM
XRESET
FG_PG_COM
DRUM_FG_SENS
DEC2
3
DEC1
2
FG
2
0
FG-PG_COM
FP/PG
C2435
10V
0.047u
0.9
0
1
2.8
PG
∗
FG1
LIMOUT
DRUM_PG_SENS
8.2
F
1.64 kHz
VCC2
CN2402 10P
DRUM_ERROR
CAP_ERROR
R2439
XX
S_REEL_-
37
(9/10)
SREEL_FG
13
14
REG_GND
15
FG2
16
CAP_U
T_REEL_+
C2418
0.01u 16V
T_REEL_FG2
TREEL_FG
DRUM_PWM
R2424
0
R2442
1k
CAP_U
CAP_U
CAP_PWM
C2427
2.2u
MR_VCC
FG VCC
17
FG1
18
M-SW(C)
19
C2451
XX
FG1
MODE_SW_C
J
C2424
0.01u
16V
C2425
XX
R2423
33k
R2420
XX
C2412
0.01u
16V
C2419
XX
R2418
10k
C2411
0.01u
38
MODE_SW_A
M-SW(A)
21
DEW
22
DEW_AD
C2448
XX
C2420
0.1u
10V
20
C2443
XX
C2444
XX
M-SW(B)
C2445
XX
C2446
XX
C2447
XX
MODE_SW_B
UNLOAD
(6/10)
LOAD
XCS_IC_2401
LM_LIM_DET
K
CN2404 15P
C_LOCK_SW
15
HI8_MP
14
REC_PROOF
13
XCC_DOWN
XRST_VTR
35
(7/10)
HI8_MP_SW
VSP_SO
REC_PROOF
XVSP_SCK
ME_SW
ME/MP
12
TREEL_FG
MECHANISM
BLOCK
L
(SENSOR)
(PAGE 4-33)
HALL_COM
11
T_REEL(-)
10
T_REEL(+)
9
SENSOR_VCC
8
S_REEL(+)
7
S_REEL(-)
6
REG_GND
5
T_REEL_-
SREEL_FG
T_REEL_+
TAPE_TOP
TREEL_FG
CAP_FG
R2434
82
S_REEL_-
CAP_FG
CAP_FWD
CAP_FWD
CAP_ON
CAP_ON
DRUM_FG
4
4.5
TAPE_LED(K)
3
TEPE_END(C)
2
DRUM_PG
1
Q2401
UNR32A600LS0
LED DRIVE
(6/10)
Drum speed servo
13 sec
DRUM_PG
Drum phase servo
Drum servo(speed and phase)
TAPE_LED_ON
0.1
TAPE_TOP_C
TAPE_TOP(C)
REC
50 mVp-p
36
DRUM_FG
TAPE_END_C
M
SIGNAL PATH
IC2401 ra REC/PB
TAPE_TOP
TAPE_END
S_REEL_+
TAPE_LED(A)
wj
SREEL_FG
TAPE_END
R2403 470
Capstan speed servo
R2431
XX
C2441
XX
C2442
0.1u
Capstan servo(speed and phase)
05
VC-344 (5/10)
4-17
39
(6/10)
4-18
REC/PB
PB
40
(6/10)
18
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2. SCHEMATIC DIAGRAMS
VC-344 BOARD SIDE A
VC-344 BOARD SIDE B
For Schematic Diagram
• Refer to page 4-43 for printed wiring board.
1
2
3
4
6
5
8
7
10
9
11
13
12
14
16
15
17
19
18
D_1.9V
48
D_2.8V
CAMERA/MECHA CONTROL (VC BLOCK)
(9/10)
DRP
SWP
CAP_ON
CAP_FWD
XFE_ON
CUSTOM_LED_ON
RF_SWP
CAM_DD_ON
XCS_MC_FLASH
TRRT
TRRV
REC_CRRT1
SYS_V
TAPE_LED_ON
XNS_SW
AV_JACK_IN
XS_JACK_IN
CAP_FG
IR_ON
TREEL_FG
RB4514
100k
IC4502
EEPROM
IC4502
HN58X2532TI
C4511
0.1u
IRIS_COM
IRIS_COM
SREEL_FG
OFR
DRUM_FG
DRUM_PG
LINE_OUT_VD
VREF
VFO_VD
IC_3302_SLEEP
SDC_ON
R4507
100k
OSD_V
XRST_LINK
XCS_SFD
XIRQ_GEMINI
REG_GND
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
R:REC MODE
P:PB MODE
∗:IMPOSSIBLE TO MEASURE THE
VOLTAGE AT THE MARKED POINTS.
B
21
FB4501
VC-344 BOARD (6/10)
A
20
CL4509
2.7
RXD3
VDD
2.8
HOLD
32K
3
SCK3
GND
TXD3
LENS_TEMP_AD
EEP_SO
5
0
HALL_AD
∗
C4504 10p
R4504 XX
YAW_AD
YAW_AD
R4501
100
DRUM_PWM
DRUM_PWM
UNLOAD
LOAD
LOAD
LM_LIM_DET
LM_LIM_DET
TREEL_FG
TREEL_FG
SREEL_FG
SREEL_FG
TAPE_END
CAP_FG
CAP_FWD
C4501
0.01u
16V
C4506 0.1u
2.8
ALL_PS
0
SW_PS
R2.8/P0
TAPE_TOP
2.8
TAPE_END
2.8
1.4
1.4
2.8
2.8
2.8
0
1.3
2.8
1.4
1.4
0.2
2.4
2.8
2.8
2.8
1.4
2.1
∗
∗
0
1.4
0.1
0
2.8
0
0
2.8
2.8
0
0
2.6
DRP
SWP
CAP_ON
VDD
CAP_FWD
XEVF_TALLY
(D_2.8V)
XEASY_MODE_LED
PJ1
R1.3/P2.8
XFE_ON
RF_SWP
PK2
EXT_STROBO
R2.4/P2.2
XCS_MC_FLASH
R2.8/P0
CAM_DD_ON
TRRT
REC_CRRT1
TRRV
VSS
SYSV
TAPE_LED_ON
MIC_IN
V_JACK_IN
MIC_MONO
PL5
XS_JACK_IN
XNS_ON_SW
PL6
VDD
CAP_FG
TREEL_FG
IR_ON
SREEL_FG
DRUM_FG
CHIME_SCL
CHIME_SDA
FP
DRUM_PG
VSS
LINE_OUT_VD
MELODY_CARR
PN4
PN6
MF_A
IC_3302_SLEEP
XIRQ_GEMINI
MF_B
SDC_ON
XRST_LINK
PO4
(OSD_V)IC_5001_V
(D_1.9V)
156
XCS_VFD
155
PH2
154
XREEL_HALL_ON
153
HOLD_EEP
152
VDD
151
C2
150
VSS
149
TUL
148
XRST_PHY
XCS_TRF
13
LM-
14
VDD
15
LM+
(D_2.8V)
(D_2.8V)
XCS_IC_2401
(D_2.8V)
AVDD_U
147
(D_2.8V)
AVRH_U
146
AVSS_U
145
XCS_IC_3302
ANIN1
144
ANIN0
143
MF_LED
142
19
XAUDIO_IN
20
XCS_TG
21
VSS
22
ALE
GENERAL_AD
141
XREEL_HALL_ON
C4516
0.1u
23
FRRV
SYSTEM_AD
140
24
WR01
DEM1
139
RDX
26
VOUT_ON
27
XDVCN
28
ALL_PS
IC4501
138
XPWDA
137
PG1
136
ZOOM_SW_AD
135
2.8
DXXA08
2.8
DXXA09
SW_PS
30
TAPE_TOP
Changing the data is needs when IC4501 is replaced.
Please refer to change of IC4501 in page 1-6.
134
CHIME_PWR_CONT
133
33
DXXA08
YAW_AD
130
34
VSS
PITCH_AD
129
35
C1
IRIS_HALL_AD
128
36
VDD
LENS_TEMP_AD
127
37
XME/MP
AVSS_1
126
38
XCS_LCD
(D_2.8V)
AVRH_1
125
39
XCS_EVF
(D_2.8V)
AVDD1
124
CUSTOM_LED_ON
40
VST_C_CHARGE
(D_2.8V)
AVDD_0
123
XCS_EEP
41
P43
(D_2.8V)
AVRH_0
122
XCS_LCD
42
P42
43
XCS_IC_5401
44
LENS_DET
45
46
DXXA08
R1.9/P2.6
121
HI8_MP_SW
120
XX
RB4507
XX
R4524
1k
DEW_DET
119
D31A07
SDC_IN
118
D30A06
EVF_DD_ON
117
C4519
100k
(Note)
D27A03
CHIME_AD0
114
USB_DET
113
D25A01
XVIDEO_IN
112
52
D24A00
ATF_ERR
111
53
VDD
REC_PROOF
110
54
ZM_RST_SENS
ME_SW
109
XCS_SFD
XCS_VFD
LINE_OUT_VD
XIRQ_GEMINI
XIRQ_GEMINI
ATF_LATCH
ATF_LATCH
XUSB_EN
XUSB_ON
VSP_SO
CL4506
XVSP_SCK
CL4505
YAW_AD
PITCH_AD
CAM_XCE
HALL_AD
CAM_SCK
VSP_SI
VSP_SO
XVSP_SCK
CAM_XCE
CAM_SCK
CAM_SO
CAM_SO
CAM_SI
XCS_TG
XCS_TG
C4518
100k
(Note)
CS_CH
CS_CH
CH_SCK
CH_SCK
CAM_SO
CAM_SI
EVF_DD_ON
CAM_SO
Note:Resistors are mounted to the
location where C4518 and
C4519 are printed.
XUSB_ON
REC_PROOF
ME_SW
XPWAD
DEM1
DEM0
VSP_SO
XCS_IC_5401
BEEP
BEEP
XFE_ON
XFE_ON
ALL_PS
CL4501
RB4503
XX
100k
IC_5001_SO
IC_5001_SI
SW_PS
32
ALL_PS
(4/10)
0
RF_SWP
C4512
0.1u
MODE_SW_C
0
MODE_SW_B
40
(5/10)
6
(10/10)
Q4501,4502
MODURATOR
MODE_SW_A
XRST_VTR
XCS_IC_3301
CAP_PWM
EEP_SI
DRUM_PWM
EEP_SCK
EEP_SO
VD_SI
REC_CRRT0
VD_SCK
CAM_SI
CAM_SO
DEM0
CAM_SCK
CH_SO
CH_SCK
VSP_SI
VFO_OE
VSP_SO
XVSP_SCK
IC_5001_SO
IC_5001_SI
XCS_IC_5001
IC_5001_SCK
XCS_MC_FLASH
CS_CH
MD2 (REG_GND)
DA_STRB
EEP_SCK
EEP_SCK
XCS_VD
EEP_SO
FC_RST_LED
(10/10)
ZM_RST_LED
EEP_SI
EEP_SI
C4509
1u
RB4509
100k
VD_SO
XSYS_RST
EEP_SO
VSP_SO
BEEP
R4535
0
R4537
100k
C4510
0.1u
REC_CRRT1
XVSP_SCK
RB4515
1k
REC_CRRT0
47
Q4502
2SC584600LS0
0
RB4501
100k
XSYS_RST
REC_CRRT1
RF_SWP
CL4504
2.8
R4510
47k
XSYS_RST
REC_CRRT0
M
CL4510
RF_SWP
IRIS_COM
IC_5001_SI
IC_5001_SCK
(8/10)
XVSP_SCK
XCS_IC_5401
SW_PS
IRIS_PWM
IC_5001_SO
XCS_IC_5001
49
DEM0
0
0
0
2.8
2.8
2.8
0
2.7
0
0
0.6
1.1
2.7
0
2.8
2.7
1
2.8
2.6
2.1
2.6
0.1
2.8
2.6
0
2.8
2.5
0.1
2.7
2.9
2.6
2.8
2.9
2.8
2.8
XPWDA
XPWAD
DEM1
MODE_SW_C
MODE_SW_B
0
XPWDA
XME/MP
RB4508
10k
XCS_IC_5001
IC_5001_SCK
19
XUSB_ON
(2/10)
R4536
47k
OSD_V
V_LIGHT_PWM
46
(7/10)
(3/10)
USB_DET
XME/MP
L
27
CAM_SCK
DA_STRB
SYS_V
SYS_V
(1/10)
CAM_SCK
DEW_AD
(1/10)
OSD_V
4
CH_SO
HI8_MP_SW
55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108
XRST_VTR
VREF
XCS_VFD
CH_SO
0
MODE_SW_A
OSC0
VDD
EEP_SO
XFF_REW_UP
EEP_SCK
VD_SO
VD_SI
(D_1.9V)
REC_CRRTO
VD_SCK
VDD
CAM_SI
CAM_SO
DEMO
CAM_SCK
XWP_EEP
GCAM_SO
GCAM_XSCK
VSP_SI
VSP_SO
XVSP_SCK
R1.4/P0
OOE/FLD
IC_5001_SO
IC_5001_SI
XCS_IC_5001
IC_5001_XSCK
XCS_GCAM
SDC_ON
SDC_ON
(2/10)
XCS_OSD
ZM_RST_LED
VOUT_ON
P22
(D_2.8V)
(D_2.8V)
D26A02
51
EVF_VG(ATF_DEBUG_IN)
50
VOUT_ON
XRST_VTR
XRST_PHY
XCS_SFD
DA_STRB
2.8
CAM_DD_ON
C4517
0.1u
C4515
1u
0.7
OSC1
2.5
49
VSS
2.5
D24A00
115
XRST_VTR
D25A01
CAM_DD_ON
116
CHIME_AD1
MELODY_ENV
2.5
CHIME_AD2
D28A04
XCS_IC_3301
D26A02
D29A05
48
PB7
XCS_VD
47
PB4
R1.1/P0
IRIS_PWM
R1.4/P0
IRIS_COM_PWM
2.5
VSS
2.5
D27A03
V_LIGHT_PWM
D28A04
VD_SO
ATF_DEBUG
VD_SCK
XRST_LINK
VREF
VSP_SI
C4521
XX
2.8
CAP_PWM
2.5
DRUM_PWM
2.5
EEP_SI(MC_FLASH_SI)
2.5
D29A05
OFR
CAM_SI
0
0
LENS_DET
LPS
XUSB_EN
LENS_TEMP_AD
2.8
2.8
XCS_IC_5401
D30A06
XCS_VD
AVSS_0
IC_3302_SLEEP
XUSB_EN
C4513
2.8
D31A07
J
XPWAD
2.8
0
VST_C_RESET
VD_SO
VD_SO
ZOOM_VR_AD
2.8
VD_SCK
VD_SCK
R4514
RB4512
1k
1M
(2/10)
XDVCN
LINE_OUT_VD
2.8
2.8
DA_STRB(XCS_DAC)
VD_SI
VD_SI
XPWDA
RB4510
100k
1.6
2.4
XCS_LCD
DEM1
LM_LIM_DET
2.8
XCS_LCD
12
DXXA08
XRST_PHY
R1.1/P0.3
(D_1.9V)
D31A07
XRST_LINK
R1025
0
2.4
2.1
D30A06
OFR
2.8
2.5
D29A05
LPS
2.4
C4505
0.1u
C4507
0.1u
D28A04
IC_3302_SLEEP
R1024
XX
R1030
XX
2.8
131
D27A03
DXXA09
1.3
XPWAD
D26A02
XDVCN
2.8
29
D25A01
D31A07
2.8
CAMERA/MECHA CONTROL
IC4501
MB91194APFF-G-155-BNDE1
D24A00
D26A02
D30A06
2.8
LM_LIM_DET
ALE
D24A00
D29A05
0
25
SWP
D28A04
0
XUSB_ON
R1.9/P2.6
CUSTOM_LED_ON
XCS_EEP
DRP
D27A03
0
DXXA09
USB_DET
USB_DET
TRRV
ALE
D25A01
2.8
32
DXXA09
IR_ON
IR_ON
TRRT
DRP
XCS_IC_3302
XCS_VFD
0.1
20 MHz
132
V_LIGHT_PWM
FRRV
XCS_IC_3302
R4519
100k
2.7
XUSB_EN
EVF_DD_ON
(2/10)
PH4
0
TAPE_END
EVF_DD_ON
V_LIGHT_PWM
(5/10)
157
31
XREEL_HALL_ON
ZOOM_VR_AD
5
XRST_PHY
0
ZOOM_VR_AD
10
158
R1031
0
2.8
XDVCN
XME/MP
39
HP_JACK_IN
0
2.8
XCS_TG
(10/10)
K
159
1.8 Vp-p
12
18
VOUT_ON
ME_SW
XREEL_HALL_ON
25
LPS
LPS
C4514 1u
2.8
XCS_IC_3302
2.8
ME_SW
RDX
TRRV
2.2
IC4501 1 (X4501) REC/PB
VSS
REC_PROOF
3
XCS_EEP
16
2.7
REC_PROOF
(1/10)
10
160
2.8
XCS_2401
RDX
HI8_MP_SW
HI8_MP_SW
62
XRST
CAM_XCE
TRRT
0
LOAD
WRX
DEW_AD
DEW_AD
(9/10)
9
FRRV
2.8
0.6
MODE_SW_C
MODE_SW_C
(2/10)
XINIT
VDD
0
UNLOAD
FRRV
MODE_SW_B
MODE_SW_B
13
8
161
2.8
ALE
TAPE_LED_ON
MODE_SW_A
(10/10)
MD0
2.5
XCS_CORE
11
DRUM_FG
MODE_SW_A
I
7
wk
2.8
XCS_EEP
DRUM_PG
TAPE_LED_ON
43
MD1
0
DRUM_PG
45
6
FC_RST_LED
DRUM_FG
(5/10)
MD2
ATF_LATCH
162
CAP_ON
CAP_ON
34
R4502
10k
CAP_FG
CAP_FWD
G
5
0.6
ATF_LATCH
(D_1.9V)
17
TAPE_END
36
XIN
WRX
RDX
TAPE_TOP
TAPE_TOP
(5/10)
4
XCS_IC_3301
WRX
2.8
XCS_IC_2401
XCS_IC_2401
X0
FC_RST_SENS
(5/10)
3
2.8
38
UNLOAD
VSS
2.8
CAP_PWM
CAP_PWM
2
XCS_IC_3301
SWP
PITCH_AD
PITCH_AD
(10/10)
H
VDD
XSYS_RST
VST_C_RESET
42
X1
VREF
R2.8/P0
CAM_VD(MEGA_CAM_VD)
XS_JACK_IN
VST_C_RESET
F
1
2.2
XS_JACK_IN
(10/10)
E
X4501
20MHz
R4505
XX
AV_JACK_IN
AV_JACK_IN
(D_2.8V)
VFO_VD
41
C4503
10p
VFO_VD
XCS_SFD
VFO_OE
VFO_OE
(2/10)
C4520
0.01u
216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163
IRIS_COM
15
D
2.8
XNS_SW
XNS_SW
2.7
HALL_AD
C
EEP_SCK
2.8
XRDY
4
2.8
LENS_TEMP_AD
(3/10)
2.8
CS
8
2.8
EEP_SI
7
XCS_EEP
6
FC_RST_LED
1
RB4511
1k
ZM_RST_LED
FC_RST_LED
2
LENS_DET
ZM_RST_LED
29
R4512
470k
C4508
0.1u
LENS_DET
CL4502
IRIS_PWM
IRIS_PWM
0
SIGNAL PATH
Q4501
UNR32A300LS0
REC
REC/PB
PB
Drum speed servo
XCS_MC_FLASH
Drum phase servo
Drum servo(speed and phase)
N
Capstan speed servo
Capstan servo(speed and phase)
05
4-19
4-20
VC-344 (6/10)
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2. SCHEMATIC DIAGRAMS
VC-344 BOARD SIDE A
VC-344 BOARD SIDE B
For Schematic Diagram
• Refer to page 4-43 for printed wiring board.
1
2
3
5
4
6
7
8
10
9
12
11
13
14
VC-344 BOARD (7/10)
A
HI CONTROL (HI BLOCK)
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
R:REC MODE
P:PB MODE
VOUT
D_2.8V
EVER_3.0V
R5020
470k
1
± 0.5%
3
HI_EVER_SO
HI_EVER_SCK
VTR_DD_ON
R5023
1k
BATT_IN
2.8
2
XRESET
5
6
(9/10)
HI_EVER_SCK
VTR_DD_ON
BATT_IN
C5006
0.01u
16V
54
XCS_DD
HI_EVER_SO
4
0.3
R5016
100k
± 0.5%
XCS_DD
BATT_SIG
REG_GND
Q5001
HN1L02FU(TE85R)
BATTERY CHARGE
DETECTOR
SIRCS_SIG
R5017
1M
± 0.5%
VTR_UNREG
SIRCS_PWM
(9/10)
XSYS_RST
B
BATT_UNREG
XCS_DD
50
XRESET
3
3.2
XRESET
(10/10)
RB5011
100k
R5021
47k
± 0.5%
C5010
22u
6.3V
C5005 C5008
18p
18p
D5001
MA111-(K8).S0
XCC_DOWN
R5022
0
RB5008
1k
KEY_AD0
KEY_AD1
2.9
SIRCS_SIG
2.9
1.3
0.2
0.3
0.3
2.8
3
2.5
2.7
2.8
2.8
2.8
XSIRCS_IN
IB_SI
IB_SO
XDS_RST
SIRCS_OUT
XSYS_RST
XLANC_ON
TP_SEL2
GND
XCS_DD
VCC
1.1
X0A(IN)
1.3
X1A(OUT)
BATT_SENSE
ACV_SENSE
HOT_SHOEID1
VTR_DD_SENSE
HOT_SHOEID2
KEY_AD0
IC_5001_RXD0
DD_COM/XPRD
DIAL_A
1
2
3
DIAL_B
SIRCS_PWM
4
5
6
7
8
9
IC_5001_TXD0
XCS_LCD_DRIVER
HI_EVER_SCK
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
XF_TALLY_LED
NEW_DD
LANC_IN
0.4
INIT_CHARGE_ON
3
FAST_CHARGE
0
LANC_IN
LANC_IN
LANC_OUT
XLANC_PWR_ON
2.8
OSD_V
SYS_V
2.5
C5009
0.1u
OSD_V
X5001
10MHz
1.3
1.2
OSD_V
SYS_V
R5051
100k
SYS_V
XCS_IC_5001
XCS_IC_5001
IC_5001_SCK
R5027
1M
XCS_IC_5001
IC_5001_SCK
2.9
IC_5001_SO
2.9
IC_5001_SCK
IC_5001_SO
IC_5001_SO
IC_5001_SI
IC_5001_SI
XSYS_RST
XSYS_RST
IC_5001_SI
2.6
3
HI_EVER_SCK
e;
IC5001 wk (X5001) REC/PB
2.1 Vp-p
10 MHz
I
XMODE_SW
R5018
4700
HI_EVER_SO
OSD_V
XCHARGE_LED
RB5007
1k
XCAM_LED
XPHOTO_FREEZE
J
XF_TALLY_LED
XCC_DOWN
XVTR_LED
XEJECT_SW
XLANC_PWR_ON
XBATT_INFO_SW
RB5006
1k
05
4-21
57
(2/10)
BATT_IN
R5034 470
3
2.9
(10/10)
VTR_DD_ON
3
10 11 12 13 14 15 16 17 18 19 20
XPOWER_SW
56
LANC_OUT
XLANC_PWR_ON
HI_EVER_SO
SIRCS_PWM
2.9
IC_5001_SCK0
2.9
(10/10)
SIRCS_SIG
2.9
IC_5001_XCS0
STROBO_PLUNGER
SYS_V_OUT
H
XF_TALLY_LED
RB5001
1k
SHOE_ON
N.C
53
55
(9/10)
LANC_OUT
0.4
2.9
DIAL_B
R5048
XX
R5049
XX
2.6
DIAL_A
STRB_LED_ON
C5003
4700p
BATT/XEXT
TEST
BT_LED_ON
XEJECT_SW
XEJECT_SW
BATT/EXT
VCC
0
XRESET
X_TAL
MEM_LED
XPHOTO_FREEZE
TEST
RST_X
3
XPHOTO_FREEZE
3
BATT_IN
X_TAL
GND
C5002
0.01u
XLANC_JACK_IN
CHRGELED/LCD_LED_ON
XVTR_LED
SYS_V
HI CONTROL
IC5001
MB89097PFV-G-170-BND-ERE1
TP_Y
CAM_LED
XCAM_LED
XVTR_LED
G
R5015
47k
IC5001
TP_X
0.2
XCAM_LED
KEY_AD7 (XS/S_SW)
F_TALLY
RB5009
470k
XCHARGE_LED
2.7
C5015
XX
XHI_DS_HELP
R0/P0.2
XPOWER_SW
XCHARGE_LED
TP_SEL1
KEY_AD6
R0/P1.7
XMODE_SW
KEY_AD5
VTR_LED
XMODE_SW
VTR_DD_ON
R0.2/P0
C5014
XX
LCD_COM/XDATA
KEY_AD4
XLANC_POWER_ON
2.8
KEY_AD7
KEY_AD7
KEY_AD3
2.8
KEY_AD5
KEY_AD7
FAST_CHARGE
XMEM_ON
2.8
KEY_AD5
GND
XPHOTO_FREEZE
RB5002
1k
INIT_CHARGE
3
F
(10/10)
FAST_CHARGE
BATT/XEXT
BATT_SIG
32.768 kHz
LANC_IN
AVREF
XEJECT_SW
R5024
10k
52
3.0 Vp-p
VCC
XCC_DOWN
3
XPOWER_SW
INIT_CHARGE_ON
BATT/XEXT
LANC_OUT
0
3
KEY_AD2
XBATT_INFO_SW
2.8
2.9
C5004
0.1u
XMODE_SW
DIAL_A
DIAL_B
DIAL_B
KEY_AD5
2.3
2.8
XBATT_INFO_SW
2.9
DIAL_A
KEY_AD3
KEY_AD1
KEY_AD3
XBATT_INFO_SW
FAST_CHARGE
BATT_SIG
KEY_AD2
XPOWER_SW
(10/10)
KEY_AD1
2.9
51
E
KEY_AD2
3
INIT_CHARGE_ON
IC5001 ta (X5002) REC/PB
60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61
KEY_AD1
KEY_AD0
C5013
XX
C5011
XX
C5017
XX
C5016
XX
KEY_AD0
wl
R5019
10M
KEY_AD2
KEY_AD3
35
XCC_DOWN
(5/10)
X5002
32.768kHz
D
VC-344 (7/10)
16
0.3
C
4-22
46
(6/10)
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2. SCHEMATIC DIAGRAMS
VC-344 BOARD SIDE A
VC-344 BOARD SIDE B
For Schematic Diagram
• Refer to page 4-43 for printed wiring board.
1
2
3
4
5
6
8
7
9
10
11
13
12
14
VC-344 BOARD (8/10)
A
C5449
XX
C5440
0.1u
AUDIO PROCESS (AU BLOCK)
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
C5439
0.001u
REG_GND(MIC_GND)
C5441
0.001u
R5429
1500
INT_MIC_L
B
C5437
0.01u
R5432
680
C5438
0.01u
R5431
680
SFD_BCK
SFD_FCK
24
58
INT_MIC_R
R5430
1500
(10/10)
SFD_LRCK
1
3
5
7
DATA_FROM_SFD
C5442
0.47u
AUDIO_R_I/O
1.5
1.9
1.5
1.5
0.3
1.5
2.3
1.5
MIC_OUT(R)
IR(L)
A_GND
IR(R)
HP_OUT(L)
9
R5418
100k
1
3
5
7
RB5402
1k
1
C5405
0.47u
4.8
0
Q5401
RN1910FE(TPLR3)
AUDIO MUTE
C5410
10u
16V
2.5
-0.9
0
1
4
5
2
-0.9
2.5
0
0
C5411
10u
16V
2.4
Q5403
UNR31A500LS0
MUTE SWITCH
6
1
3
3
-0.9
2
4.8
C5408
10u
16V
R5439
XX
HP_COM
8
HP_OUT(R)
7
1.9
10 11 12 13 14 15 16
1.8
6
VREFS
5
BEEP_IN
4
1.8
3
1.5
2
SP_IN
1
1.8
C5427
4.7u
MIX_OUT
PB_IN(R)
C5401
10u
16V
C5404
10u
16V
2
4
6
8
Vcc(H)
PB_IN(L)
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
MIC_EXT/INT
MIC_IN(L)
MIC_MONO
MIC_OUT(L)
MIC_DET2
EXT_MIC(L)
MIC_CTL1(L)
MIC_CTL2(L)
MIC_GND
INT_MIC(L)
INT_MIC_Vcc
EXT_MIC_Vcc
LINE2_IN(R)
Vcc(L)
0.1
R5441
4700
R5442
4700
C5430
4.7u
VREFH
ALC_OUT(R)
F
49
A_GND
LINE2_IN(L)
LPF_IN(R)
3.3
1.5
POWER_MUTE
AUDIO PROCESS
IC5401
LA74207W-TBM-E
REC_OUT(R)
SP OUT+
1.5
A_GND
SP_Vcc
C5423
0.22u
LINE1_OUT(R)
IC5401
1.6
DEM0
LPF_IN(L)
REC_OUT(L)
SP_GND
2.8
LINE1_OUT(L)
1.6
1.9
LINE1_IN(R)
ALC_OUT(L)
SP_OUT-
C5422
0.22u
XMIC_P_SAVE
MUTE
1.5
R5437
XX
P.MUTE_TC
2.8
1.4
C5421 0.47u
VREFM
XCS_AU
0.22u
1.4
R5422
1k
DEM1
0.47u
LINE1_IN(L)
Vcc(D)
XPWAD
C5431
E
C5433
0.22u
C5420
R5421
1k
Vcc(M)
2.8
1.5
C5409
4.7u
AGC_TC
2.7
2.8
MIC_DET1
XVSP_SCK
1.3
1.3
2.3
C5419
10u
16V
INT_MIC(R)
MIC_CTL2(R)
2.8
D_GND
2.8
1.9
XPWDA
AUDIO_L_I/O
RB5401
100k
C5435
0.47u
MIC_IN(R)
EXT_MIC(R)
VSP_SO
C5424
22u
6.3V
64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49
R5440
XX
1
2
1.3
3
A/D,D/A
CONVERTER
IC5402
AK4550VT-E2
VCOM
AINR
AINL
VDD
VSS
4
2.8
5
2.8
DEM1
SDTO
DEM0
6
0
0.7
D
7
C5436
0.47u
2
4
6
8
48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33
IC5402
8
1.6
0.3
AOUTR
AOUTL
XPWDA
SCLK
XPWAD
C5443
0.47u
1.3
2.8
2.8
1.4
0.1
1.4
10 11 12 13 14 15 16
MCLK
9
SDTI
C
1.2
LRCK
0.7
DATA_TO_SFD
MIC_CTL1(R)
(2/10)
(6/10)
R5438
XX
G
C5414
0.01u
CN1008 2P
VSP_SO
1
SP(+)
2
SP(-)
CONTROL
KEY
BLOCK
(CF-5100)
(PAGE 4-35)
XVSP_SCK
C5445
15u
4V
C5416
0.1u
6.3V
C5446
1u
R5417
47k
C5418
0.1u
C5415
XX
XCS_IC_5401
R5416
2200
AU_4.6V
AU_2.8V
3.3
5
BEEP
C5413 0.01u
H
MT_5V
R5403
4700
Q5408
2SD1834-T100
SWITCH
59
(9/10)
4.3
R5407
47k
REG_GND
SIGNAL PATH
AUDIO
SIGNAL
REC
I
PB
05
4-23
4-24
VC-344 (8/10)
DCR-TRV255E/TRV260/TRV265/TRV265E
10
IN1
L1305
22uH
IN2
4 5
8.3
0.015u
C1314
2.9
L1303
22uH
2 1
5.3
C1317
4 5
8.3
1.2
0.8
0.7
1.1
0
1.1
0
0.1
1.2
0.8
1.2
1.4
1.4
1
R1366
IN2
IN3
IN4
XX
1.5
R1367
XX
5.7
R1368
XX
2.9
R1369
XX
4.8
CAP_VS
R1370
XX
1.2
DRUM_VS
R1371
XX
3.2
2.9
2.9
HI_EVER_SO
3
HI_EVER_SCK
C1301
0.1u
3
R1303
30k
0.8
C1303
0.1u
0
3
1
DTC6
IC1301 ys REC/PB
GND0
FB1
-INE1
out7
8.1 Vp-p
OUT6
-INS8
IN1
OUT5
500 kHz
IN2
OUT4
IN3
OUT3
IC1301
IN4
IN5
OUT2
OUT1
DRUM/CAPSTAN PWM DRIVE,
DC CONTROL,RESET
IC1301
MB44A120BPFV-G-BND-ERE1
IN6
LD
VCC0
VCC1
LANC_DC
DIN
es
CLK
4 5
8.3
C1322
4.7u
IC1301 ya REC/PB
SENSE
VCONT
RST
8.1 Vp-p
RT
LANC_SIG
DATA_IN
CSCP
500 kHz
SEL
WAKE_UP
2 1
L1306
22uH
6.9
Q1309
CPH5815-TL-E
SWITCHING
3
4 5
8.3
5.3
2.5
C1326
4.7u
6.6
Q1316,1318,1320
5V REG
AU_2.8V
R1348
22k
± 0.5%
R1349
6800
5
7.7
6 3
1.2
3.5
L1307
22uH
Q1310
CPH5815-TL-E
SWITCHING
3
4 5
8.3
5
2
Q1320
UP04501008S0
DRUM_VS
4.9
REG_GND
AU_4.6V
7.6
MT_5V
59
(8/10)
REG_GND
1.4
1 4
AU_2.8V
0.8
C1353
XX
30
(4/10)
RP_6.0V
Q1318
2SA207800LS0
R1339
47k
48
(6/10)
RP_2.8V
5
7.6
C1336
4.7u
2 1
D_2.8V
RP_4.6V
8.3
8.3
D_1.9V
C1352
4.7u
C1355
4.7u
R1337
470
8.3
1.2
5
D_2.8V
REG_GND
REG_GND
R1340
15k
± 0.5%
Q1316
2SA1734(TE12L)
R3.6/P1.8
3.5
± 0.5%
0.8
CAP_VS
7
R1338
8200
4
L1320
4.7uH
C1333
4.7u
(2/10)
A_4.6V
5
1
L1319
4.7uH
Q1308
CPH5815-TL-E
SWITCHING
3
8
A_2.8V
1.4
L1318
4.7uH
L1304
33uH
2 1
2.5
2
-INE7
3
FB7
-INE6
FB5
4
5
FB6
6
+INE6
7
-INE5
-INE4
+INE5
FB4
FB3
-INE3
8
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
1.2
IN1
XCS_DD
F
+INE2
ea
0.6
R1302
1k
E
-INE2
FB2
C1302
0.022u
9
D_1.9V
3
2
Q1317
UP04501008S0
L1317
4.7uH
3.5
16 15 14 13 12 11 10
Q1315,1317
1.9V REG
2.2
1.2
4.8
1.1
2.2
2.2
6
C1332
4.7u
IN4
D
D_1.5V
2.8
Q1315
2SA1162-YG
-TE85L
2.2
R1336
100k
Q1307
CPH5815-TL-E
SWITCHING
3
C1316
L1316
47uH
C1331
4.7u
IN3
R1315 R1317
1k
15k
0.015u
3300p
1500p
C1308
6800p
C1304
C
R1314
1k
C1321
4.7u
R1375
XX
0.01u
R1309 R1311
6800
22k
R1306
4700
R1319 R1318
22k
120k
6.3V
C1373
0.1u
BL_REG
C1310
(10/10)
R1316
12k
± 0.5%
C1350 10u
REG_GND (BL_GND)
6.3V
BL_CONT
60
C1339
4.7u
Q1306
CPH5815-TL-E
SWITCHING
22u 4V
3
22u 4V
2.6
R1308
33k
6.3V
R1307
27k
L1315
22uH
L1302
22uH
2 1
CAP_ERROR
6.3V
(5/10)
L1314
4.7uH
6.3V
DRUM_ERROR
17
L1313
4.7uH
L1310
4.7uH
5.8
IN7
37
B
16
L1312
4.7uH
C1330
4.7u
C1351
8.3
NO MARK:REC/PB MODE
R:REC MODE
P:PB MODE
15
C1340
10u
6.3V
Q1305
CPH5815-TL-E
SWITCHING
4 5
C1349
3
6.3V
6.6
10u
DC CONTROL (DD BLOCK,FU BLOCK)
XX MARK:NO MOUNT
6.3V
A
14
L1309
4.7uH
1.6
2 1
10u
VC-344 BOARD (9/10)
13
12
11
10u
9
C1347
8
C1345
7
C1348 10u
6
C1346 10u
5
4
VC-344 BOARD SIDE B
C1344 10u
For Schematic Diagram
• Refer to page 4-43 for printed wiring board.
1
3
2
VC-344 BOARD SIDE A
C1343
4-2. SCHEMATIC DIAGRAMS
R1344
4700
R1350
10k
± 0.5%
D_2.8V
C1337
4.7u
28
A_4.6V
(3/10)
A_2.8V
REG_GND
D1306
C1327
2.2u MA4ZD03001S0
3
3
C1323
2.2u
3
4.8
C1320
1u
BATT_IN
C1338
2.2u
1
2
3
3.6
XRESET
Q1311
CPH5819-TL-E
SWITCHING
5.9
C1371
22u
10V
IC1302
TK11160CSCL-G
C1392 XX
R1378 XX
C1334
1u
C1329
4.7u
6V REG
1.3
C1342
0.1u
L1308
2.2uH
4.8
CAP_VS
C1313
4.7u
EVER_3.0V
-7.8
VOUT
R4011
XX
R1313
470
61
D1305
MA4ZD03001S0
C1324
2.2u
LI_3V
(10/10)
0.1u
C1315
0.1u
C1311
1
3
2
C1335
2.2u
4
R1310
100k
R1328
10k
0.5%
R-7.6/P0.4
36
R-0.1/P0.3
5
Q1314
UP04401008S0
DRUM_VS
MT_5V
R1327
100k
± 0.5%
R-7.4/P-7.8
1
2
R1329
220k
4 1
C1328
1u
Q1304,1314
-7.5V REG
R1304
47k
33
REG_GND (MT_GND)
D_2.8V
(5/10)
VTR_UNREG
EP_13.5V
REG_GND
± 0.5%
CAM_DD_ON
2
3
D1303
MA4ZD03001S0
D1302
MAS3132E0LS0
R-7.6/P0.4
Q1304
2SC584600LS0
C1341
1u
C1318 1u
0.1u
C1312 1u
XX
C1305
0.047u
10V
C1307
I
C1306
D1301
1SS357-TPH3
4
L1311 10uH
H
MT_5V
IC1302
5
1
3
4
5.2
5
4
VTR_DD_ON
2
1
8.2
4
3
7.6
3.3
3
3.1
2.5
2.4
7.6
R1301
4700
1.2
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
REG_GND (MT_GND)
8.2
2
L1301
33uH
3
DATA_OUT
XCTL2
OUTC3
RESET
CS
VIN
VRO
REG_3V
VBAT
CTL1
VREF
GND
VR
CS
(7/10)
CDET
54
G
VOUT
IN7
R0.5/P0
R1324
22k
62
(6/10)
CAM_-7.5V
8
DC IN
C4001 C4002
XX
XX
R4006
100k
LF4001
XX
BATT_GND
1
BATT/XEXT
2
ACV_GND
3
ACV_UNREG
4
BATT_SIG
5
BATT_UNREG
6
7.7
2
8.1
8.3
1
3
7
R4001
1k
8.3
Q4003
2SA1734(TE12L)
R1305
100k
F003
(1.4A/32V)
R4010
6800
Q1301
2SA207800LS0
6 3
Q4002
TPCS8302(TE12L)
SWITCH
0.1
5
C4003
0.022u
8
Q4003,4004
CHARGE
CONTROL
3
14
4.3
Q4004
UNR32A300LS0
F002
(1.4A/32V)
R1334
47k
Q1303
UP04501008S0
R1323
22k
4.7u
R4.8/P0
5
R1335
8200
R2.8/P0
± 0.5%
C1325
2.2u
D4001
MA4ZD03001S0
D4002
MAZW068H0LS0
2
1
(1/10)
REG_GND
D_2.8V
Q1302
2SC584600LS0
Q1302,1312,1313
R1326
15V REG
22k
R1331
39k
VTR_UNREG
50
BATT_UNREG
(7/10)
REG_GND
R2.2/P0
R1332
7500
± 0.5%
REG_GND
EP_13.5V
0
Q4001
2SC584600LS0
SWITCH
-15.8
C4005 10u
4
C4006 XX
3
1
A_4.6V
± 0.5%
8
S
D_2.8V
14
R4.3/P5.2
5
5
Q1301,1303
13.5V REG
F001
(1.4A/32V)
4.8
2
Q1313
UP04501008S0
13.6
4.8
2
8
R1333
100k
± 0.5%
R15.1/P0
63
R1322
XX
15.2
8.1
6
R4004
0
R15.2/P15.8
8.3
4
CN4001 6P
K
A_2.8V
13.6
R1330
100k
± 0.5%
C1319
BT901
15.9
R4009
1200
R4008
10
R4003
0
BATT_SIG
J
CAM_15V
Q1312
2SA207800LS0
BATT/XEXT
C1309
0.1u
(7/10)
FAST_CHARGE
R15.1/P0
R1312
100k
F004
(1.4A/32V)
R4007
1M
55
15.9
INIT_CHARGE_ON
Q1324
2SC584600LS0
R1343
100k
-15.2
C4004
10u
BATTERY
TERMINAL
-15.7
0
L
REC
REC/PB
PB
Q1324,1325
-15.3V REG
5
Q1325
UP04401008S0
2
4 1
0.5
R1347
100k
R1359
68k
± 0.5%
EP_2.8V
PANEL_-15.3V
EP_4.6V
R1358
220k
± 0.5%
-15.7
3 6
SIGNAL PATH
R1357
0
± 5%
R1341
XX
63
(10/10)
A_2.8V
MT_5V
C1357
2.2u
D_2.8V
EVER_3.0V
IN7
(VL_16V)
Drum servo(speed and phase)
05
Capstan servo(speed and phase)
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
VC-344 (9/10)
4-25
4-26
Les composants identifiés par une marque 0 sont
critiques pour la sécurité. Ne les remplacer que
par une piéce portant le numéro spécifié.
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2. SCHEMATIC DIAGRAMS
VC-344 BOARD SIDE A
VC-344 BOARD SIDE B
For Schematic Diagram
• Refer to page 4-43 for printed wiring board.
1
3
2
4
5
6
8
7
9
10
11
13
12
14
15
16
REG_GND (BL_GND)
VC-344 BOARD (10/10)
A
BL_REG
17
60
(9/10)
BL_CONT
CONNECTOR (SE BLOCK,CN BLOCK)
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
R1003
1200
CN1003
EVF BLOCK
2
EVF_4.6V
3
HSYNC
4
VSYNC
5
VIDEO_IN
6
DIG_GND
7
ANA_GND
ZOOM_VR_AD
EVF_DD_ON
EVF_DD_ON
BW_Y
4
3.3V REG
1
2
4.8
16P
3
1.3
2
XMODE_SW
3
XPOWER_SW
4
CHARGE_LED_VDD
5
XCHARGE_LED
6
N.C
7
CONTROLL KEY
BLOCK
(SS-5100)
XMODE_SW
XCAM_LED
XCHARGE_LED
10
D_2.8V
11
ZOOM_VR
12
REG_GND
13
KEY_AD5
14
XPHOTO_FREEZE
15
TPA+
41
TPA-
(6/10)
USB_D+
(2/10)
USB_D-
USB
USB
USB
USB
USB_D-
F
5
2
5
3
4
3
4
D1007
DF6A6.8FU(TE85R)
D1006
DF6A6.8FU(TE85R)
PANEL_B
4
BL_CONT
IR_ON
3
BL_GND
USB_DET
2
BL_REG
CUSTOM_LED_ON
1
SE_GND
PANEL_R
AV_JACK_IN
PANEL_G
XCS_LCD
21
REG_GND
63
EVER_3.0V
(9/10)
PANEL_VD
A_2.8V
XLANC_PWR_ON
LANC_IN
CL1001
CL1002
LANC_IN
KEY_AD0
LANC_OUT
KEY_AD1
LANC_OUT
51
CL1003
KEY_AD1
CL1004
KEY_AD2
CL1005
KEY_AD3
CL1006
DIAL_A
CL1007
DIAL_B
CL1008
XBATT_INFO_SW
CL1009
DIAL_A
CN1001
0
36P
H
VL+
1
MIC_GND
2
MIC_GND
3
INT_MIC_L
4
INT_MIC_R
5
VREF1
6
LIA1
7
LIA2
31
XCS_MC_FLASH
XSYS_RST
EEP_SI
47
EEP_SO
(6/10)
EEP_SCK
REC_CRRT1
REC_CRRT0
XRESET
XRESET
(7/10)
R1034
1k
XCS_EEP
RF_MON
RF_MON
(4/10)
V_LIGHT_PWM
MD2 (REG_GND)
KEY_AD0
KEY_AD3
(7/10)
1
4
D_2.8V
PANEL_B
XLANC_PWR_ON
16
0
IN7 (VL_16V)
PANEL_G
PANEL_G
KEY_AD2
5
R1009
Q1001
1k
6
XN4601-TW
VIDEO
LIGHT
DRIVE
MT_5V
PANEL_R
PANEL_R
PANEL_B
15.8
3
EP_13.5V
PANEL_HD
CL1010
PANEL_VD
(2/10)
R1008
10k
2
EP_4.6V
VD_SCK
PANEL_HD
R1007
1k
± 0.5%
15.8
EP_2.8V
VD_SO
± 0.5%
G
PANEL_-15.3V
VD_SI
VD_SI
DIAL_B
15.8
(PAGE 4-29)
CN6001
PANEL_G
XBATT_INFO_SW
R1006
22
± 0.5%
XCS_LCD_DA
PD-204
V_LIGHT_PWM
XCS_LCD
XPHOTO_FREEZE
2
10
THROUGH THE
PD-124 HARNESS
PANEL_R
XCS_EEP
(6/10)
VIDEO_I/O
VIDEO_I/O
56
VD_SCK
XCS_EEP
43
S_C_I/O
S_C_I/O
(7/10)
VD_SO
11
5
V_LIGHT_PWM
USB_D+
KEY_AD5
6
VD_SI(HDO)
12
S_Y_I/O
S_Y_I/O
16
PANEL_HOLD
13
6
VD_SCK
XEJECT_SW
REG_GND
14
7
XS_JACK_IN
PANEL_B
9
(2/10)
PANEL_-15.3V
15
PANEL_XVD
VD_SO
ZOOM_VR_AD
PANEL_2.8V
16
C-SYNC/XHD
AV_JACK_IN
TPB-
20
26
PANEL_4.6V
17
9
IR_ON
(2/10)
18
8
USB_DET
XEJECT_SW
PANEL_13.5V
TPB+
TPB+
TPB-
XPHOTO_FREEZE
R1014
82
1
PANEL_HD
CUSTOM_LED_ON
USB_3.3V
6
R1001 470
VD_SCK
XCS_LCD
XS_JACK_IN
XVTR_LED
XVTR_LED
1
FRRV
FRRV
(7/10)
XCAM_LED
XVTR_LED
TPA-
(2/10)
52
XPOWER_SW
XCAM_LED
MODE_LED_VDD
XEJECT_SW
XMODE_SW
XCHARGE_LED
XEJECT_SW
(PAGE 4-34)
11
TPA+
17
KEY_AD7
XMODE_SW
XPOWER_SW
XCHARGE_LED
9
VD_SO
SIRCS_PWM
SIRCS_PWM
KEY_AD5
KEY_AD7
R1029 150
8
E
KEY_AD5
XPHOTO_FREEZE
XVTR_LED
VD_SI
PANEL_VD
XPOWER_SW
XCAM_LED
RF_SWP
(6/10)
SIRCS_SIG
SIRCS_SIG
AD5
19
RF_SWP
(2/10)
D1011
MAZW068H0LS0
D
REG_GND
C1001
0.1u
KEY_AD7
XF_TALLY_LED
XF_TALLY_LED
(2/10)
3.3
5
6
22
BW_Y
8
4.8
1
(6/10)
(7/10)
IC1001
XS/S_SW
EVF_DD_ON
BW_Y
C
CN1009
45
ZOOM_VR_AD
53
IC1001
TK11133CSCL-G
THROUGH
FP-797 FLEXIBLE
1
NSLEEP
4.7u
B
8P
3.3V
C1003
CN1013
LCD902
B/W
LCD
UNIT
20P
20
CN1011
16P
16
XCS_EEP
15
EEP_SI
14
EEP_SO
13
XLANC_POWER_ON
12
LANC_IN
11
LANC_OUT
10
REG_GND
XLANC_PWR_ON
LANC_IN
LANC_OUT
C2010
XX
R2007
XX
C2012
XX
L2001
XX
C2007
XX
10V
9
RF_MON
8
REG_GND
7
N.C
(FOR CHECK)
C2016
XX
R2008
XX
CPC
RF_MON
R2010
XX
PITCH_AD
6
REG_GND
RF_SWP
RB2001
XX
8
5
RF_SWP
4
NC
3
NC
2
FRRV
1
EEP_SCK
THROUGH THE
17
FP-796 FLEXIBLE
(PAGE 4-32)
J
R1005
2200
AM1
PASS
HO1
OUT1
HI1
Vref1
LO1
1
42
IC2001
XX
LI_3V
(6/10)
VCC
16
CN754
2
OUT2
15
MT_5V
SI-041
3
CRST
MT_5V
SIRCS_PWM/IR_DRV_EN
C2002
XX
6.3V
SIRCS_SIG
4
AM2
14
5
Vref2
13
6
HI2
D_2.8V
XSIRCS_SIG
LIB2
I
7
LO2
XF_TALLY_LED
8
HO2
12
GND
11
9
LIA1
A_2.8V
XF_TALLY_LED
10
LIA2
9
10
LIB1
FRRV
VREF2
A_2.8V
11 12 13 14 15 16 17 18 19 20
IR_ON
CN1007 22P
SIRCS_PWM
D1009
MAS3132E0LS0
1
REG_GND
AV_JACK_IN
18
2
N.C
AV_JACK_IN
AUDIO_L_I/O
19
3
LI_3V
AUDIO_R_I/O
20
4
D_2.8V
REG_GND
21
5
KEY_AD0
6
BATT_INFO
7
CUSTOM_LED_VDD
VST_C_RESET
VIDEO_I/O
VIDEO_I/O
22
REG_GND
23
S_Y_I/O
24
XS_JACK_IN
25
S_C_I/O
26
REG_GND
27
NTPA
28
YAW_AD
R2005
XX
C2005
XX
10V
S_Y_I/O
XS_JACK_IN
C2008
XX
S_C_I/O
R2006
XX
KEY_AD0
XBATT_INFO_SW
R1032
150
Q1002
UNR32A100LS0
LED DRIVE
2.8
CUSTOM_LED_ON
0
D1010
MA8068(K8).SO
TPA-
K
61
(9/10)
TPA+
TPA
29
REG_GND
30
KEY_AD1
8
N.C
9
XCUSTOM_LED_ON
10
REG_GND
11
XMS_LED
12
N.C
13
MS_LED_VDD
14
KEY_AD1
15
D_2.8V
16
KEY_AD3
17
D_2.8V
18
KEY_AD2
19
DIAL_A
20
DIAL_B
21
REG_GND
22
XRESET
CONTROLL KEY
BLOCK
(CF-5100)
(PAGE 4-35)
TPB+
TPB
31
NTPB
32
REG_GND
33
USB_D-
34
KEY_AD3
TPB-
DIAL_A
USB
USB
USB_DUSB_D+
L
USB_D+
35
USB_DET
36
USB
USB
KEY_AD2
REG_GND (MIC_GND)
INT_MIC_L
USB_DET
INT_MIC_R
AUDIO_L_I/O
58
DIAL_B
(8/10)
2
3
AUDIO_R_I/O
XRESET
SIGNAL PATH
VIDEO SIGNAL
CHROMA
Y
Y/CHROMA
1
D1012
MAZW068H0LS0
AUDIO
SIGNAL
REC
M
PB
05
4-27
4-28
VC-344 (10/10)
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2. SCHEMATIC DIAGRAMS
PD-204 BOARD
For Schematic Diagram
• Refer to page 4-47 for printed wiring board.
1
3
2
4
PD-204 BOARD
A
6
5
7
8
9
11
10
13
12
14
15
17
16
18
19
When the machine needs to be repaired,please refer to
page 1-3 to discriminate the type of LCD(TYPE C or TYPE S).
LCD DRIVER,BACKLIGHT DRIVE
29
28
27
26
25
2.8 Vp-p
VDD2
NC / CSD
2.8
38
1
IC6001 r; REC/PB
COM DA
VG
2.8
VR
0.01u
GIN
VCC2
470 mVp-p
1.8
0.01u
RIN
VB
H
42
SCANEN / TEST
XVD / VDIN
HD / SYNI/HD
VG
VR
2.8
XHD
IC6001
44
2.6
4.8
45
VCC1
GND1
XCS
GRES / EX1
2.6
CL6004
N.C / CLS
VG
2.4
VR
MCLK/CLD
16
CLR/CTR
15
OE/PSS2
14
SRT/PSS1
13
STBYB/RES
12
VBC/CLS
11
VCOM/VCOM
10
RESET/EX2
9
STBYB/PSG
8
GSRT/MO2
7
GPCK/MO1
6
GRES/EX1
5
N.C./SPS
4
VDD/VGLAC
3
VGL/VGL
2
VSS/GND
3
4
5
6
POCB/LOWI
8
9
TG15
TYPE S
<2.6>(0)
TG18
<2.8>(1.4)
TG17
<1.7>(2)
C6029
1u
25V
TG13
TG18
D6006
1SS355TE-17
TG16
TG12
13
2.8
10
11
VSS1
Filter
Filter2
OPIN
7
1
TYPE C
12.9
12
1
3
5
12.9
Note2: CN6004 Pin Name A/B
A: TYPE C MODEL
B: TYPE S MODEL
R6020
0
2
4.1
IC6001 ql REC/PB
3.2 Vp-p
(TYPE C)
3.5 Vp-p
(TYPE S)
13.5
CL6014
Q6004,6005
SWITCH
RB6001
10k
Q6004
HN1B04FE-Y/GR(TPLR3)
2H
CL6015
3.4
-15.6
4 6
C6010
560p
C6009
0.1u
Q6007
XX
4
4.7
R6008
XX
C6030
XX
6
VGH/VGH
TYPE C
13.5
C6015
1u
16V
TG15
TG20
TG14
TG13
TG12
Q6005
HN1B04FE-Y/GR(TPLR3)
R6031
0
TYPE C
9
R6036
XX
LCD901
2.5INCH
COLOR
LCD
UNIT
TG19
H
R6035
XX
HCNT/SPD
17
TG16
1.2
2
PANEL_HOLD
H
VR/VR
18
TG17
CL6005
R6032
120k
1.3
0
<1.4>(2.8)
2.8 Vp-p
2.6
1
G
OPOUT
IC6001 rd REC/PB
1.4
5
1.4
6
2.8
SE_GND
SRT / PSS1
5
<0.1>(2.2)
SE_GND
<0>(2.8)
4
GSRT / MODE2
2.6
3
STBYB / PSG
VDD1
GPCK / MODE1
SO
<0.1>(2.8)
N.C.
R6042 XX
SO
STBYB / RES
SI
CP / SPS
N.C.
2
VG/VG
19
TG20
VB
2.4
0.2
W/H / HWB
(PAGE 4-34)
PANEL_REV
1
48
CONTROL
KEY
BLOCK
(PR-5100)
47
SI
PANEL_REV
Note1: IC6001 Pin Name A/B
A: TYPE C MODEL
B: TYPE S MODEL
XSCK
15
CN6005 6P
VB/VB
20
TG14
CM7104L42-T4:TYPE C
LRS57231:TYPE S
14
46
F
VSS/GND
21
TG22
2.8
SCK
VDD/VSH3V
22
TG23
RB6003
100
2.4
CL6006
GND2
LCD DRIVER
IC6001
2.8
XCS
VSH/VSH5V
23
TG25
1.5
1.7
XVD
24
TG24
43
E
BIN
CN6004 24P
CL6013
R6030
5600
1.7
41
C6005
3
22
C6004
0.01u
39
C6003
40
SE_GND
C6022
0.1u
VB
23
V
2
D6009
RB521S-30-TE61
21
BL_REG
30
COM OUT
3
31
VCC3
BL_GND
32
XLED
4
33
EXTDA
BL_CONT
34
RESET / EX2
D
35
BLDET
5
36
PWM / PWMOP
PANEL_B
IC6001 rs REC/PB
OE / PSS2
6
4
CLR / CTR
PANEL_G
CL6017
MCLK / CLD
7
VSS2
8
PANEL_R
37
PANEL_XVD
CL6007
C6028
10u
16V
HCNT / SPD
XVD
24
9
XLED
TG25
C6006
0.01u
20
C-SYNC/XHD
C6001
0.1u
XCS
XHD
19
(PAGE 4-28)
SCK
CL6016
18
10
17
11
16
12
VD_SCK
XCS_LCD_DA
CN1003
C6020
3.3u
25V
C6002
1u
2H
6.8
VD_SO
THROUGH THE
PD-124 HARNESS
C6019
22u
4V
BLDET
SI
2H
13.6
C
SO
<2.1>(1.2)
13
<1.4>(0.1)
VC-344
(10/10)
3.2 Vp-p
(TYPE C)
3.5 Vp-p
(TYPE S)
TG19
VD_SI(HDO)
FB6001
L6001
47uH
PANEL_HOLD
EXTDA
14
2.6
15
<0>(2.8)
16
PANEL_HOLD
1.7
17
REG_GND
TG22
18
IC6001 w; REC/PB
3.2 Vp-p
(TYPE C)
3.5 Vp-p
(TYPE S)
2H
H
TG23
PANEL_4.6V
PANEL_2.8V
PANEL_-15.3V
H
FB6002
XX
8
IC6001 wa REC/PB
5.6 Vp-p
(TYPE C)
5.85 Vp-p
(TYPE S)
<0.3>(2.8)
19
TG24
20
7
IC6001 wg REC/PB
470 mVp-p
1.4
AD5
PANEL_13.5V
6
IC6001 el REC/PB
460 mVp-p
CN6001 20P
B
2
IC6001 ek REC/PB
<0.4>(1.4)
1
NO MARK:REC/PB MODE
< >:TYPE C MODEL
( ):TYPE S MODEL
CL6012
XX MARK:NO MOUNT
R6009
68k
R6012
1/16W
10k
± 0.5%
R6013
1/16W
± 0.5%
-15
5
2
2.8
3 1
100k
-15
-15.6
C6016
0.01u
D6007 XX
I
R6029
XX
L6004
22uH
TYPE C
TYPE S
C6026
22u
6.3V
4.7
C6027
0.1u
R6040
47k
EXTDA
R6041
1k
Q6008,6009
B+ SWITCH
R6026
0
4
R6019
0
C6024
1u
16V
4.7
TYPE C
RB6002
1M
TYPE S
Q6009
2SA1832FV
(TH3SONY)
R6039
3900
0.1
2.6
L6002
4.7uH
J
R6005
1800
1/10W
L6003
82uH
Q6008
RN1102FV(TH3SONY)
5
1
2
D6008
XX
6
3
4
K
5.4
5.4
5
3
-0.7
C6007
4.7u
10V
D6002
XX
L
6
4
2
5
3
Q6002
CPH5504-4TE-E
INVERTER DRIVE
Q6003
XX
D6004
MA111-(K8).S0: TYPE C
1SS355TE-17: TYPE S
XLED
R6002
XX
BLDET
R6010
22k
D6003
XX
C6012
0.1u
D6005
XX
BL_HIGH
9
N.C
8
N.C
7
N.C
6
N.C
5
N.C
4
R6011
XX
Q6001
XX
R6001
XX
10
C6013
12pF
T6001
INVERTER
TRANSFORMER
1
-0.7
4
CN6003 10P
10
C6011
0.015u
2 1
C6032
XX
ND901
BACKLIGHT
N.C
3
BL_LOW
2
LED
1
LED_GND
SIGNAL PATH
VIDEO SIGNAL
CHROMA
R6014
470
REC
LND605
A
PB
M
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
05
PD-204
4-29
4-30
Les composants identifiés par une marque 0 sont
critiques pour la sécurité. Ne les remplacer que
par une piéce portant le numéro spécifié.
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2. SCHEMATIC DIAGRAMS
SI-041 BOARD, FP-792 FLEXIBLE BOARD
For Schematic Diagram
• Refer to page 4-49 for printed wiring board.
1
2
3
5
4
6
7
9
8
10
12
11
SIGNAL PATH
A
VIDEO SIGNAL
CHROMA
Y
AUDIO
SIGNAL
Y/CHROMA
FP-792 FLEXIBLE BOARD
VIDEO LIGHT
REC
D002
NSPW500BS-TL2
PB
REG_GND
1
VL+
B
D001
NSPW500BS-TL2
D003
NSPW500BS-TL2
D001-003
(VIDEO LIGHT)
LAND1
STATIC_GND
REG_GND
3
STATIC_GND
LAND2
C
SI-041 BOARD
LND757
REG_GND
JACK
1
LND754
VL +
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
LND763
REG_GND
D
Note: CN751, CN752, D753, D754, IC751, J751 and J752 are
not included in SI-041 complete board.
R760 XX
R759
XX
C754
XX
3
MIC901
MICROPHONE
CN753 4P
Vref1
3
GND
4
R761
XX
LIA1
2.8V
1
1
INT_MIC_L
2
GND
3
INT_MIC_R
4
GND
L
2
R
SE752
XX
SE751
XX
CN754 36P
E
1
Vref2
2
LIA2
GND
8
S3
MIC_GND
34
MIC_GND
33
INT_MIC_L
32
INT_MIC_R
31
VREF1
30
LIA1
29
LIA2
28
VREF2
27
A_2.8V
26
A_2.8V
25
XF_TALLY_LED
24
D_2.8V
23
XSIRCS_SIG
22
MT_5V
21
MT_5V
20
SIRCS_PWM/IR_DRV_EN
19
AV_JACK_IN
18
AUDIO_L_I/O
THROUGH THE
FP-796 FLEXIBLE
17
AUDIO_R_I/O
(PAGE 4-27)
16
REG_GND
LND765
15
VIDEO_I/O
STATIC_GND
14
REG_GND
13
S_Y_I/O
12
XS_JACK_IN
11
S_C_I/O
10
REG_GND
C
Y
S
S
S2
5
C751
XX
R762
XX
S
S
G
G
2
CGND
1
7
S4
TRV265/TRV265E
IC751
YGND
F
C758 C755
XX
XX
4V
FB751
XX
REMOTE COMMANDER
RECEIVER
IC751
RPM7240-V4
VCC
GND
R OUT
6 NC
G
1
6
1
6
6
1
2
5
2
5
2
5
3
4
3
4
3
4
D756
RSE6.8XN-TR
D752
RSE6.8XN-TR
2.8
3
GND
L
V
BR
SW
R
2
A/V
OUT
1
2
3
4
5
7
Q751
2SD2114KT146
LED DRIVE
R751
XX
VDR757 XX
D759
TLRMV1021(T15SOY,F)
(TALLY)
2.8
R752
56
D754
SI50-RH51CSH870IT
(IR EMITTER)
3
0.2
R763
1k
C757
XX
1
J752
2.8V
VL+
C753
XX
4V
C759
XX
R754
XX
S VIDEO
OUT
S1
6
4
35
Y
3
4
J751
3
36
C
R753
56
D753
SI50-RH51CSH870IT
(IR EMITTER)
R755
XX
C752
XX
D751
RSE6.8XN-TR
H
D755
MA728-(K8).S0
USB
I
LF751
XX
CN752 5P
GND
5
ID
4
D+
3
D-
2
VCC
1
(USB)
R756 0
USB
USB
USB
USB
R765
10k
R757
0
USB
R764
10k
C756
XX
USB
USB
USB
USB
9
NTPA
8
TPA
7
REG_GND
6
TPB
5
NTPB
4
REG_GND
3
USB_D-
2
USB_D+
1
USB_DET
VC-344
(10/10)
CN1001
USB
USB
J
TRV255E
DV OUT
K
LF752
XX
CN751 4P
TPA
4
NTPA
3
TPB
2
NTPB
1
DV
TRV260/TRV265
/TRV265E
D760
XX
LND764
3
2
1
4
5
STATIC_GND
L
05
4-31
4-32
SI-041, FP-792
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2. SCHEMATIC DIAGRAMS
FP-228, 299, 300, 301, 302, 802 FLEXIBLE BOARD
For Schematic Diagram
• Refer to page 4-51 for printed wiring board.
1
FP-300
FLEXIBLE
2
S001
(START/STOP)
C
PHOTO
1
POWER/MODE_SW
ON
XPOWER_SW
FP-299
FLEXIBLE
1
DEW
2
M-SW (A)
3
M-SW (B)
4
M-SW (C)
1
5
FG1
2
MR
SENSOR 3
6
FG VCC
7
FG2
4
8
REG_GND
9
CAP_U
10
CAP_U
11
CAP_W
12
CAP_W
13
CAP_V
14
CAP_V
15
VH+
16
HU1
17
HU2
18
HV1
19
HV2
20
HW1
21
HW2
22
VH-
DEW SENSOR
M902
CAPSTAN MOTOR
FP-228
FLEXIBLE
3
4
2
HE
3
4
2
HE
1
W
VC-344 BOARD
(5/10)
HE
05
1
REC/PB
2
3
4
CONTROL KEY BLOCK
(PR-5100)
A
XX MARK:NO MOUNT
•
B
REC
T
(ZOOM)
CN2403
(PAGE 4-17)
1
SIGNAL PATH
S002
(EJECT)
RV001
20k
E
2
3
4
1
XMODE_SW
MODE
D001
REG_GND
PLAY/EDIT
S004
CAMERA D002
D
CHG D004
POWER
(CHG)
OFF
CONTROL KEY BLOCK (PR-5100) is replaced as block,
so that PRINTED WIRING BOARD is omitted.
S601
(PANEL REVERSE)
PB
Capstan speed servo
Capstan servo(speed and phase)
1
PANEL_REV
2
PANEL_REV
3
N.C
PD-204
4
N.C
CN6005
(PAGE 4-29)
5
SE_GND
6
SE_GND
C
4-33
FP-228, FP-299, FP-300, FP-301, FP-302, FP-802, SS-5100, PR-5100
4
S003
S002
C.C. LOCK
S901
MODE SWITCH
XPHOTO_FREEZE
C_LOCK_SW
16 XEJECT_SW
15
14 KEY_AD5
Hi8_MP
REC_PROOF
15
14
12 ZOOM_VR
ME/MP
13 REG_GND
HALL_COM
12
13
MODE_LED_VDD
T_REEL (-)
11
11 D_2.8V
10
CN2404
(PAGE 4-17)
9 XVTR_LED
T_REEL (+)
10
SENSOR_VCC
9
8 XCAM_LED
S REEL (+)
8
7 N.C
7
B
VC-344 BOARD
(5/10)
CHARGE_LED_VDD
S REEL (-)
6 XCHARGE_LED
REG_GND
6
5
TAPE_LED (A)
5
4 XPOWER_SW
4
CN1009
(PAGE 4-27)
D004
S001
TAPE_LED (K)
R001 1k
Hi8 MP
3
VC-344
(10/10)
D001
H001 3
T REEL
1 SENSOR 4
2
TAPE_END (C)
D002
REC PROOF
2
CONTROL KEY BLOCK (SS-5100) is replaced as block,
so that PRINTED WIRING BOARD is omitted.
D003 XX
ME/MP
TAPE_TOP (C)
3 XMODE_SW
H002 3
S REEL
SENSOR
4
1
2
1
LND001
FP-301
FLEXIBLE
5
XX MARK:NO MOUNT
•
D001
TAPE LED
4
CONTROL KEY BLOCK
(SS-5100)
A
Q001
TAPE TOP
3
2 REG_GND
Q002
TAPE END
2
1 XS/S_SW
FP-802 FLEXIBLE
STATIC GND
FP-302
FLEXIBLE
05
4-34
3
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2. SCHEMATIC DIAGRAMS
1
3
2
4
5
6
8
7
9
10
11
12
CONTROL KEY BLOCK (CF-5100)
A
XX MARK:NO MOUNT
•
CONTROL KEY BLOCK (CF-5100) is replaced as block,
so that PRINTED WIRING BOARD is omitted.
S003
S007
S012
S015
FF
REW
PLAY
STOP
(
)
2
1
B1
B
R005
1200
A1
B1
)
2
1
B2 4
3 A2
B2 4
(
R009
1500
B1
A1
3 A2
(
)
2
1
R013
2200
A1
B1
)
2
1
B2 4
3 A2
B2 4
S022
(
R020
8200
R017
3900
B1
A1
3 A2
2
B2 4
S023
(PANEL_O/C_SW)
R022
27k
EASY
1
B1
A1
3 A2
2
1
4
3
B2
A1
A2
D002
EASY
BT001
LITHIUM
BATTERY
S004
PAUSE
C
S011
(
)
2
1
4
3 A2
S008
XX
R006
1200
R010
1500
S016
R014
2200
FADER
S019
S020
R018
3900
FOCUS
R023
8200
LIGHT
S024
BACKLIGHT
SEL/PUSH EXEC
REG_GND
D
B1
2
N.C
B2 4
XCUSTOM_LED_ON
3 A2
3 A2
B2
1
4
3 A2
B1
1
2
B2 4
A1
S001
DSPL/BATT
INFO
R007
1200
2
1
A1
B1
3 A2
B2 4
2
1 A1
B2 4
3 A2
VOLUME
S009
S005
(REC)
B1
3 A2
DCR-TRV260
/TRV265/TRV265E
A1
1
B2 4
A1
2
S013
R011
1500
MENU
END SEARCH
-
R015
2200
+
R019
3900
S017
R021
8200
S021
B6
BATT_INFO
CUSTOM_LED_VDD
B1
SW2 4
B2
A1
1
2
SW1B 5
R001 10k
B1
SW1A 3
D_2.8V
KEY_AD0
A1
A1
B1
COM 2
N.C
LI_3V
S7
1
REG_GND
VC-344
(10/10)
XMS_LED
CN1007
(PAGE 4-28)
N.C
B1
D001
XX
MS_LED_VDD
2
B2 4
R002 10k
1
A1
B1
2
B2 4
3 A2
1
A1
B1
3 A2
2
1
B1
A1
3 A2
B2 4
2
B2 4
1
A1
3 A2
B1
2
B2 4
1
A1
3 A2
KEY_AD1
D_2.8V
E
R003 10k
KEY_AD3
S006
D_2.8V
S018
S010
REC
KEY_AD2
R004
10k
DIAL_A
(
)
2
1
R008
1200
S014
EXPOSURE
R012
1500
BURN
DVD/CD
R016
2200
TITLE
DIAL_B
B1
REG_GND
22
A1
B1
2
A1
B1 2
1 A1
B1
3 A2
B2 4
3 A2
B2 4
1
2
1
A1
XRESET
F
B1
2
1
B2 4
A1
3 A2
B2 4
3 A2
S002
4
B2
G
RESET
3
A2
LND025
CH GND
VC-344
(8/10)
1
CN1008
(PAGE 4-24)
2
SIGNAL PATH
SP(+)
SP901
SPEAKER
SP(-)
AUDIO
SIGNAL
H
PB
05
4-35
4-36
CF-5100
DCR-TRV255E/TRV260/TRV265/TRV265E
4-3. PRINTED WIRING BOARDS
Link
CD-471 BOARD
SI-041 BOARD
VC-344 BOARD (SIDE A)
FP-792 FLEXIBLE BOARD
VC-344 BOARD (SIDE B)
FP-228, FP-299, FP-300, FP-301, FP-302,
FP-802 FLEXIBLE BOARD
PD-204 BOARD
COMMON NOTE FOR PRINTED WIRING BOARDS
MOUNTED PARTS LOCATION
CIRCUIT BOARDS LOCATION
FLEXIBLE BOARDS LOCATION
Board Name
Function
CD-471
VC-344
CCD IMAGER
A/D CONVERTER, TIMING GENERATOR, DV SIGNAL PROCESS, LENS
CONTROL, STEADYSHOT, DV INTERFACE, VIDEO OUT, LENS DRIVE,
REC/PB AMP, SERVO, CAMERA/MECHA CONTROL, HI CONTROL,
AUDIO PROCESS, DC CONTROL, CONNECTOR
LCD DRIVE, BACKLIGHT DRIVE
JACK
PD-204
SI-041
DCR-TRV255E/TRV260/TRV265/TRV265E
4-3. PRINTED WIRING BOARDS
4-3. PRINTED WIRING BOARDS
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS
•
•
•
•
•
•
: Uses unleaded solder.
: Circuit board
: Flexible board
Pattern from the side which enables seeing.
: pattern of the rear side
(The other layers’ patterns are not indicated)
Through hole is omitted.
Circled numbers refer to waveforms.
There are a few cases that the part printed on diagram
isn’t mounted in this model.
C: panel designation
• Chip parts.
Transistor
B
Diode
6 5 4 4 5 6 5
C
E
4 4
1 2 3 3 2 1 1 2 3 3 2 1
1
3
3
1 23
2
1 2
1 2
1 3
4 3
4
1
2 3
4
4
3
3
4
5 4 3 3 4 5 2
1 2
1
4
3 2
1 1
2
2
1
3
4 6 5 4 4 5 6
2
1 1 2 3 3 2 1
2 2
Pattern
Board Name
Parts Location
Total Number of Layers
Layers Not Indicated
CD-471
–
4 layers
2 to 3 layers
VC-344
4-53
4 layers
2 to 3 layers
PD-204
4-54
2 layers
–
SI-041
4-54
2 layers
–
FP-792 Flexible
–
1 layer
–
FP-228 Flexible
–
1 layer
–
FP-299 Flexible
–
1 layer
–
FP-300 Flexible
–
1 layer
–
FP-301 Flexible
–
1 layer
–
FP-302 Flexible
–
1 layer
–
FP-802 Flexible
–
1 layer
–
4-39
3
5
1 6 54
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2. SCHEMATIC DIAGRAMS
4-3. PRINTED WIRING BOARDS
CD-471
Note for Printed Wiring Board (See page 4-39).
: Uses unleaded solder.
CD-471 BOARD
13
14
L951
R953
C952
1
C
B
C954
Q951
5
1
1
D951
3
4
R968
IC951
7
8
C957
LND951
14
R969
7
2
6
E
R970
2
R952
C951
C953
C955
9
8
1-860-935-
11
05
4-41
4-42
CD-471
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2. SCHEMATIC DIAGRAMS
VC-344
4-3. PRINTED WIRING BOARDS
MOUNTED PARTS LOCATION
Note for Printed Wiring Board (See page 4-39).
: Uses unleaded solder.
VC-344 BOARD (SIDE A)
CN2403
CN3201
11
22
1
1
R2402
R3221 R3222 R3223 R3224
ECB
Q3203
A
CN2402
R2401
10
C3217
1
R3236
R4524
R4536
CL4510
C4515
C4521
162
109
C4512
108
163
R3234
R4535 R4510
R4512
1
2
RB4515
CL4502
RB4508
CN1501
CL4501
BCE
C4511
IC4501
CN2401
FB4501
CL4509
RB4501
RB4503
RB4511
C4510
Q4501
13
14
C
Q4502
BC E
C4509
CL4504
RB4509
L3202
C4517
C4516
R3237
C3206
C3203
R3235
C3205
C3208
B
C3210 C3204
C3212
C3213
R3233
RB4507
C4514
C3202
C4518
37
36
25
R3232
C2433
C4519
18
24
C3211
19
C2428
C2438
R4514
C3214
R3210
C3215
R1025 R1024
IC3201
R1031 R1030
R3212
R4519
21 20
R3214
RB4510
C4513
L3201
48
R3216
RB4512
1
13
C3201
12
R3218
R2428
R3219
2
1
D1011
KAK
R1014
R1336
R1029
R1324
Q1314
16
+ C1350 A
+ C1349 A
L1315
+ C1348 A
+ C1343 A
RB5007
L1301
CN1009
L1320
L1319
L1318
+ C1346 A
RB5006
R4001
1
CN4001
R5048
R5049
LF4001
RB5009
4
3
C4005
C5010
C4006
L1310
C4004
R4004
L1302
6
C4001
L1306
F001
F002
C5002
C5003
R5015
2
1
F003
R5024
C4002
L1304
F004
RB5011
K2
L1305
C1339
L6501
RB5001
L1307
Q5001
20
CN1003
C5014
RB5002
RB5008
KA K
D1012
G
R1003
D5001
R1001
C6509
C6512
R1007
R1008
1
C5011
22
R5017
C6504
C5013
R5020
2
2
R1009
R1006
80
C5004
C5017 C5016
C5015
1
R5016
CN1008
C5006
21
CN1007
C6510
+ C1344 A
R5021
1
C6511
1
61
Q1002
L1317
R4003
R5019
C5005
D1010
R1032
36
F
29
60
E B
C
C1342
IC5001
L1303
X5002
C5410
3
1
R5022
C5409
20
30
C5008
C5411
C5408
D1006
R1328
C
C5404
4
2
21
41
C3331
R5018
B
40
R5407 R5403
R5439
L2001
C2016
R2005
R2006
C2005
CN1001
E
Q5408
Q1001
R5027
C2010
C2008
20
L1312
X5001
C5009
+ C1351 A
R5034
L1316
C1001
R5051
11
5
1
R1329
+ C1345 A
1
3
L1313
2
+ C1347 A
1
IC1302
R1327
4
L1314
IC1001
C2012
+ C1371 A
D1007
C4506
C4507
R4505
C1577
5
IC2001
C5401
R4502
C4501
FB3301
RB2001
10
R1338
C4508
8
7
C4503
C1003
R2007 R2008 R2010
54
C4504
L1551
C2002
E
R1585
C1563
C5419
C2007
1
D1552
C5424
E
55
1
C4505
CN1013
1
23
D
R1340
B
28
216
R4504
2
CN1551
X4501
24
R1337
C
2
C1554
C2449
C2450
Q1317
Q1315
1
RB1553
R4501
C1556
C1352
R4537
Q1555
R1560
D1551
R4507
C2401
CL4506 CL4505
K K
A
D4002
1-860-934-
05
VC-344 (SIDE A)
1
2
4-43
3
4
5
6
7
8
4-44
9
11
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2. SCHEMATIC DIAGRAMS
4-3. PRINTED WIRING BOARDS
MOUNTED PARTS LOCATION
Note for Printed Wiring Board (See page 4-39).
: Uses unleaded solder.
VC-344 BOARD (SIDE B)
Q3204
C2442
C1503
R1524
12
B
R1523
2
4
1
5
C1526
5
1
8
IC1601
C1601
FB1601
R3396
C3306
12
1
R1505
1
9
C1552
E B
C
A KA
C5405
C6507
17
F
R6509
9
8
RB6501
IC6501
16
C6503
Q1554
C1566
C1568
C5435
C3332
C3336
R6507
80
C1337
61
C3333
C3338
1
60
C6506
R3361
R3356
R3353
IC3302
E
D1009
16
15
C5449
C5437
R1005
1
RB5401
R5418
R5431
C6502
20
41
RB5402
C6501
21
L1309
Q1310
C5442
C5441
33
32
Q5401
R3399
40
R1573
R5440
16
17
CL3301
L1553
C1575
R5422
IC5401
A C5445 +
R3398
C3326
C3327
C3359
FB3303 R3371
R3372
RB3307
R3365
R3313
R3335
5
4
1
8
R3332
R3330
R5023
Q3303
RB3304
Q3308
R3326
R3343
RB3305
C3358
R3350
C3328
C3342
R3314
Q3307 E C B
L3307
R3316 R3315
R5432
C5443 C5440
C5439
162
Q5403 E C B
109
R5430
C5436
C5415
163
R5429
C5438
C5416
C5446
4
5
C3335
C1321
48
C5413
C5414
6
7
R5416
9
R5417
L3313
C1332
Q1307
Q1305
C1330
R1577
49
FB3302
G
4
1-860-934-
Q4002
05
R1567
1
C3320
C3344
C3322
L3320
L3305
C1338
C1329
8
D
14
R1575
R1564
C5418
R1302
R1308
C1302
C3319
C3321
R1309
R1306
C1304
C1308
C1310
R1311
R1319
R1318
C1314
R1314
R1315
C1316
C1317
L1311
C1334
R1378
C1341
R1312
Q1308
C1323
C1333
Q1306
5
1
R1307
R1375
C1324
Q1312
C
B E
C1319
R1316
R1322
Q1318
R4006
R4011
8
10
IC1552
R1566
C5420
C3357
Q1309
Q4001
R4009
D4001
L1308
C1326
EC B
11
12
A C1340 +
C1336
R4008
Q1311
C1331
E
108
13
L3310
C1327
E
Q4003
C4003
B
R1339
C
C
Q1316
B
C
B E
B E
R1349 R1348
14
C1565
1
8
1
C3345
C1573
Q1551 E C B
64
R4007
R4010
C
Q1320
C1355
Q4004
C5423
R5438
C1392
C1322
C1353
R1344
D1303
C1373
D1306
C1320
R1359
R1358
R1350
C1328
C1335
R1335
R1357
R1347
C
B E
R1343
C1357
C1325
R1334
Q1324 D1305
R1330
R1326
C1309
C
B E
R1323
Q1325
R1333
R1332
R1304
Q1301
R1341
Q1303
Q1302 Q1313
R1305
E B
C
Q1304
R1310
E B
C
R1331
C5421
C5422
R1366
C1313
R5437
C5427
C5430
C3314
R1367
R1317
R5441
R5442
L3321
16
1
IC3301
R1368
C5433
C5431
RB3303
1
16
R1369
17
C1567
RB1551
C1564
7
C1559
R3397
C1572
RB1552
C1558
C3339
31
R1576
R1563
R5421
C3307
R1371
R1370
64
R1565
C1560
8
9
C3313
C3341
32
16
IC5402
A KA
R1570
C1571
8
R1301
C1301
C1303
R1303
CN1011
C3310
IC1301
R1568
R1561
C1562
R1562
R1532
32
C1574
4
IC1554
R1584
5
C3309
C1561
33
49
24
216
R1583
C1307
C1306
1
48
55
R1582
C1569
1
C1576
C1311
R1578
54
R1313
C1305
D1302
C
R1581
D1301
C1312
C1315
R1525
R1512
4
48
IC1553
37
R1526
13
36
C1512
3
1
D1501
C1511
1
C1523
C3304
C1318
R1504
C1510
IC1501
C3305
R1034
X1501
R1503
C1504
C1509
13
2
48
36
37
C1518
R2403
C3219
24
25
C2441
R2431
C1507
FB1504
C1508
25
24
3
C1502
FB1501
C1501
C1528
C1527
13
12
C1513
C1531
A C1524 +
C1515
C2427
C2437
R2438
R2420
C2435
C2431
C2436
C2430
C1516
R1533
C2434
R2433
R1530 R1529
R2434
C1532
FB2403
C2426
C2429
R2418
C2411
C2419
R2423
R2439
R2435
C2412
C4520
C2439
FB2402
R2404 C2402
R1509
C1514
60
R2424
C2440
C2425
C3220
Q3202
R1506
C1525
C1530
C2422
R2436
61
41
RB4514
1
25 24
26
R1521 R1531
C2424
4
5
27
40
R2441
C2423
23
C2451
L1501
R2422
IC2401
R2440
8
C2413
C2417
R2442
IC4502
C3218
C1529
C2418
C2420
R2421
R3226
R2437
C2416
C2447
C2448
80
22
C3221
RB3201
21
C2445
C2446
1
R3231
R3220
C2444
C2414
1
IC1502
C2415
R2419
20
15
IC1503
C
B E
C2407
C2443
A
R3225
R3230
Q2401 B C E
Q3205
R2405
C2406
CN2404
C3222
RB3202
R3229
L3203
FB2401
RB2401
E B
C
C2409
L3204
C3223
C2403
8
7
4-45
6
5
4
3
2
4-46
11
1
VC-344 (SIDE B)
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2. SCHEMATIC DIAGRAMS
4-3. PRINTED WIRING BOARDS
MOUNTED PARTS LOCATION
PD-204
Note for Printed Wiring Board (See page 4-39).
: Uses unleaded solder.
PD-204 BOARD
1
A
C6007
EC B
R6035
Q6007
L6002
L6003
1
CL6012
8
20
1
C6006
24
T6001
C6029
13
CL6007
C6024
R6026
BC E
R6040
R6029
+ C6026 A
C6013
Q6009
10
C6027
EC B
D6008
6
R6041
Q6008
CL6015
R6031
D6009
D6006
C6032
RB6001
CL6004CL6005 CL6006
RB6003
Q6005
R6020
CL6014
RB6002
C6016
C6015
1
2
FB6001
R6032
6
3
C6028
6
7
4
25
9
12
5
2
R6030
CN6005
6 5 4
1 2 3
36
IC6001
R6008
R6013
R6012 C6010
R6009 C6009
FB6002
37
48
3
1
CN6001
C6002
C
2
1
3 4 5
Q6003
R6042
B
Note: Q6002 and Q6003 have the same mount location.
When replacing Q6002 or Q6003, please refer to
schematic diagram and electrical parts list.
Q6002
C6020
R6005
5
C6011
+ C6019 A
L6001
C6001
4
CL6017CL6016
C6004
C6005
D6007
C6003 C6030
R6036
LND605
L6004
R6019
Q6004
R6039
C6022
R6001
CL6013
24
Q6001
D6004
EC B
1
D6003
D6005
05
PD-204
1
2
4-47
3
10
CN6003
C6012
D
D6002
R6002
R6014
R6011
CN6004
R6010
1
1-860-938-
4
11
5
4-48
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2. SCHEMATIC DIAGRAMS
4-3. PRINTED WIRING BOARDS
MOUNTED PARTS LOCATION
D001
(VIDEO LIGHT)
SI-041, FP-792 FLEXIBLE
Note for Printed Wiring Board (See page 4-39).
D002
(VIDEO LIGHT)
: Uses unleaded solder.
FP-792 FLEXIBLE BOARD
FP-792
1-8609291-860-929-
11
D003
(VIDEO LIGHT)
1
3
2
Note: CN751, CN752, D753, D754, IC751, J751 and J752 are
not included in SI-041 complete board.
SI-041 BOARD (SIDE B)
SI-041 BOARD (SIDE A)
5
7
4
3
LND765
A
A
J752
A/V OUT
LND757
LND763
E
1
B
C
Q751
2
LND754
R759
D753
C754
C757
C752
R762
TRV255E
D753, 754
(IR EMITTER)
DV
OUT
2
3
D754
B
CN751
4
6
36
35
C758
SE751
(YAW)
1
SE752
(PITCH)
R763
1
DV
3
TRV260/TRRV265/
TRV265E
3
D759
(TALLY)
R751
C755
3
4
4
C751
A
R755
2
1
R761
IC751
B
R752
R753
5
2
A
C753
6
1
1
3
CN752
C
5
4
D752
LF752
2
CN754
C
C759
R754
D751
R760
FB751
R764
LF751
R756
7
D756
(USB)
J751
R765
1
D755
C756
8
S VIDEO
OUT
D760
VDR757
2
7
LND764
3 2 1
D
4
6
1
2
3
5
R757
4
D
5
1
4
CN753
1-860-94105
1
2
3
4-49
4
1-860-941-
11
05
4
3
2
11
1
4-50
SI-041, FP-792
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2. SCHEMATIC DIAGRAMS
4-3. PRINTED WIRING BOARDS
FP-228, FP-299, FP-300, FP-301, FP-302, FP-802 FLEXIBLE
Note for Printed Wiring Board (See page 4-39).
FP-300 FLEXIBLE (COMPONENT SIDE)
: Uses unleaded solder.
Q001
TAPE TOP
SENSOR
1-680-436-
1
15
11
1
FP-802 FLEXIBLE
(CONDUCTOR SIDE)
FP-299
FLEXIBLE
M902
CAPSTAN
MOTOR
15
15
1
S002
C.C. LOCK
D001
TAPE LED
S001
REC PROOF
o'
H001
T REEL
SENSOR
MR SENSOR
1
4
1-680-437-
DEW SENSOR
21
1-677-049-
S901
MODE
SWITCH
1
C
B
A
COM
1-680-434-
FP-228
FLEXIBLE
11
FP-301 FLEXIBLE
(CONDUCTOR SIDE)
11
FP-302 FLEXIBLE
(CONDUCTOR SIDE)
H002
S REEL
SENSOR
o'
11
1-689-290-
22
Q002
TAPE END
SENSOR
1-680-438-
11
4-51
FP-228, FP-299, FP-300, FP-301, FP-302, FP-802
4-52
DCR-TRV255E/TRV260/TRV265/TRV265E
4-3. PRINTED WIRING BOARDS
no mark : side A
* mark : side B
4-4. MOUNTED PARTS LOCATION
VC-344 BOARD
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
C1001
C1003
C1301
C1302
C1303
C1304
C1305
C1307
C1308
C1309
C1310
C1311
C1312
C1313
C1314
C1315
C1316
C1317
C1318
C1319
C1320
C1321
C1322
C1323
C1324
C1325
C1326
C1327
C1328
C1329
C1330
C1331
C1332
C1333
C1334
C1335
C1336
C1337
C1338
C1339
C1340
C1341
C1342
C1343
C1344
C1345
C1346
C1347
C1348
C1349
C1350
C1351
C1352
C1355
C1357
C1371
C1373
C1501
C1502
C1503
C1504
C1507
C1508
C1509
C1510
C1511
C1512
C1515
C1516
C1518
C1523
C1524
C1525
C1527
C1530
C1532
C1552
C1554
C1556
C1558
C1559
C1560
C1561
C1562
C1563
C1564
E-4
D-5
D-7
D-7
D-7
D-7
C-7
C-7
D-7
E-8
D-7
C-8
C-8
D-8
D-8
C-8
D-8
D-8
C-8
E-8
F-8
G-8
F-8
F-8
E-8
E-9
G-7
E-7
E-8
F-7
F-7
G-7
F-7
F-8
E-7
E-8
G-7
G-6
E-7
G-6
F-7
E-7
D-9
E-8
E-8
E-7
F-8
E-7
E-8
E-8
E-8
E-7
C-8
F-8
E-8
D-9
E-7
B-4
B-3
B-4
B-4
B-3
B-4
B-3
B-3
B-4
B-3
B-5
B-5
B-5
C-5
B-5
B-5
B-4
B-5
C-5
D-1
D-3
D-3
D-2
D-2
D-2
C-2
C-1
D-2
D-1
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
C1565
C1566
C1568
C1571
C1573
C1574
C1575
C1601
C2401
C2402
C2403
C2406
C2407
C2409
C2411
C2412
C2413
C2414
C2415
C2416
C2417
C2418
C2420
C2422
C2423
C2424
C2427
C2428
C2429
C2430
C2431
C2433
C2434
C2435
C2436
C2437
C2438
C2439
C2440
C2442
C3201
C3202
C3203
C3204
C3205
C3206
C3208
C3210
C3211
C3212
C3213
C3214
C3215
C3217
C3218
C3219
C3220
C3221
C3223
C3304
C3305
C3306
C3309
C3310
C3313
C3314
C3319
C3320
C3321
C3322
C3326
C3327
C3328
C3331
C3332
C3333
C3335
C3336
C3338
C3339
C3341
C3342
C3344
C3345
C3357
C3358
D-1
D-1
D-1
D-1
D-1
C-2
D-2
C-3
C-9
A-4
A-7
A-7
A-7
A-7
C-7
C-7
B-6
A-6
A-8
B-6
B-6
B-8
B-8
B-6
B-6
B-8
C-7
A-7
B-7
C-7
B-7
B-7
B-7
B-7
C-7
C-7
A-7
B-7
B-8
A-3
A-5
B-5
B-5
B-5
B-5
B-5
B-5
B-5
B-4
B-5
B-4
B-4
B-5
A-4
A-5
A-4
A-4
A-4
A-5
C-5
C-4
C-4
C-3
D-6
D-3
D-6
E-6
D-6
E-6
E-6
E-4
E-4
E-5
E-5
G-3
F-2
G-3
G-3
F-2
F-2
D-6
E-5
D-6
E-6
F-2
E-6
* C4003
C4004
C4005
C4501
C4503
C4504
C4505
C4506
C4507
C4508
C4509
C4510
C4511
C4512
C4514
C4515
C4516
C4517
C4518
C4519
* C4520
C5002
C5003
C5004
C5005
C5006
C5008
C5009
C5010
C5401
C5404
* C5405
C5408
C5409
C5410
C5411
* C5413
* C5414
* C5416
* C5418
C5419
* C5420
* C5421
* C5422
* C5423
C5424
* C5427
* C5430
* C5431
* C5433
* C5435
* C5436
* C5437
* C5438
* C5439
* C5440
* C5441
* C5442
* C5443
* C5445
* C5446
* C6501
* C6502
* C6503
C6504
* C6506
* C6507
C6509
C6510
C6511
C6512
CN1003
CN1007
CN1008
CN1009
* CN1011
CN1013
CN1501
CN1551
CN2401
CN2402
CN2403
* CN2404
CN3201
CN4001
F-8
G-8
G-8
D-6
D-6
D-6
D-7
D-6
D-7
D-6
B-8
C-8
C-6
B-8
B-6
B-7
B-6
B-7
B-7
B-7
B-8
F-6
F-6
F-5
F-5
F-5
E-5
E-6
G-5
F-2
E-2
E-1
E-2
F-2
F-3
E-3
E-3
E-2
E-3
E-2
D-2
D-2
D-2
D-2
D-2
D-2
D-2
D-2
D-2
D-2
E-1
E-1
E-1
E-1
E-1
E-1
E-1
E-1
E-1
E-3
E-3
F-2
F-1
F-2
G-3
F-2
F-1
G-2
F-2
F-2
G-2
G-4
F-4
F-3
E-9
D-9
D-5
C-5
D-3
C-9
A-7
A-6
A-3
A-5
F-9
D1006
D1007
D1009
D1010
D1011
D1012
D1301
D1302
D1303
D1305
D1306
D1501
D1551
D4001
D4002
D5001
D-8
D-8
E-1
F-4
D-9
F-5
C-7
D-8
F-8
E-8
E-7
B-3
D-3
G-9
G-9
G-5
F001
F002
F003
F004
G-8
G-8
F-8
G-8
FB1501
FB1504
FB1601
FB2401
FB2402
FB2403
FB3301
* FB3302
* FB3303
FB4501
A-3
B-4
C-3
A-8
B-7
B-7
E-5
G-3
E-4
C-8
IC1001
* IC1301
IC1302
* IC1501
* IC1502
* IC1552
* IC1553
* IC1554
* IC1601
* IC2401
IC3201
* IC3301
* IC3302
IC4501
* IC4502
IC5001
* IC5401
* IC5402
* IC6501
D-4
D-8
D-9
B-3
B-5
D-1
C-2
C-2
C-3
B-7
B-5
D-4
F-3
C-7
B-8
E-6
E-2
D-3
F-1
L1301
L1302
L1303
L1304
L1305
L1306
L1307
L1308
L1309
L1310
L1311
L1312
L1313
L1314
L1315
L1316
L1317
L1318
L1319
L1320
L1501
L1551
L1553
L3201
L3202
L3203
L3204
L3305
L3307
L3310
L3313
L3320
L3321
F-7
G-7
E-7
F-8
F-7
G-7
G-6
E-7
F-7
G-6
E-7
E-8
E-7
E-7
E-8
E-7
E-8
E-8
E-8
E-8
B-5
D-3
D-1
A-5
B-5
A-5
A-4
E-6
E-6
E-6
E-6
E-6
F-2
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
4-53
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
L6501
G-2
Q1001
Q1002
Q1301
Q1302
Q1303
Q1304
Q1305
Q1306
Q1307
Q1308
Q1309
Q1310
Q1311
Q1312
Q1313
Q1314
Q1315
Q1316
Q1317
Q1318
Q1320
Q1324
Q1325
Q1551
Q1554
Q1555
Q2401
Q3202
Q3203
Q3204
Q3205
Q3303
Q3307
Q3308
Q4001
Q4002
Q4003
Q4004
Q4501
Q4502
Q5001
Q5401
Q5403
Q5408
F-1
F-4
E-8
E-8
E-9
E-8
F-7
F-8
F-7
F-7
G-7
G-6
F-7
E-8
E-8
D-8
D-8
F-8
D-8
F-8
F-8
E-8
E-8
D-2
D-1
D-4
A-3
A-4
A-4
A-4
A-4
F-5
F-5
E-5
F-8
G-8
F-9
F-9
C-8
B-8
G-5
F-2
F-2
E-3
R1001
R1003
R1005
R1006
R1007
R1008
R1009
R1014
R1025
R1029
R1031
R1032
R1034
R1301
R1302
R1303
R1304
R1305
R1306
R1307
R1308
R1309
R1310
R1311
R1312
R1313
R1314
R1315
R1316
R1317
R1318
R1319
R1323
R1324
R1326
R1327
R1328
R1329
R1330
G-4
G-4
E-1
G-1
F-1
F-1
F-1
D-9
B-6
D-8
B-6
F-4
C-8
D-7
D-7
D-7
E-8
E-8
D-7
E-7
D-7
D-7
E-8
D-8
E-7
C-7
D-8
D-8
E-8
D-8
E-8
E-8
E-9
D-8
E-8
D-8
D-8
E-8
E-8
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
R1331
R1332
R1333
R1334
R1335
R1336
R1337
R1338
R1339
R1340
R1343
R1344
R1347
R1348
R1349
R1350
R1357
R1358
R1359
R1503
R1509
R1512
R1521
R1523
R1532
R1533
R1560
R1561
R1562
R1563
R1564
R1565
R1566
R1567
R1568
R1570
R1573
R1575
R1576
R1577
R1581
R1582
R1583
R1584
R2401
R2402
R2403
R2404
R2418
R2419
R2421
R2422
R2423
R2424
R2428
R2434
R2442
R3210
R3212
R3214
R3216
R3218
R3219
R3220
R3221
R3222
R3223
R3224
R3225
R3226
R3229
R3230
R3231
R3232
R3233
R3234
R3235
R3313
R3314
R3315
R3316
R3326
R3330
R3332
R3335
R3343
E-8
E-8
E-9
E-9
E-9
D-8
D-9
C-9
F-8
D-9
E-8
F-8
E-9
F-8
F-8
F-9
E-8
E-8
E-8
B-4
B-4
B-3
C-5
B-3
C-2
B-5
D-3
C-1
D-2
D-2
D-1
C-1
D-1
C-2
C-1
C-1
D-1
D-1
D-2
D-1
C-2
C-2
C-2
C-2
A-6
A-6
A-3
A-4
C-7
A-6
B-6
B-6
B-7
B-7
A-7
A-3
B-8
B-4
B-4
A-4
A-4
A-4
A-4
A-5
A-5
A-5
A-5
A-5
A-4
A-4
A-4
A-4
A-5
B-4
B-4
B-5
B-5
E-5
E-5
E-5
E-5
F-5
F-5
E-5
F-5
E-5
VC-344
DCR-TRV255E/TRV260/TRV265/TRV265E
4-3. PRINTED WIRING BOARDS
no mark : side A
* mark : side B
PD-204 BOARD
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
R3350
R3353
R3356
R3361
R3365
R3397
R4001
R4003
R4004
R4006
R4007
R4008
R4009
R4010
R4501
R4502
R4507
R4510
R4512
R4514
R4519
R4524
R4535
R4536
R4537
R5015
R5016
R5017
R5018
R5019
R5020
R5021
R5022
R5023
R5024
R5027
R5034
R5051
R5403
R5407
R5416
R5417
R5418
R5421
R5422
R5429
R5430
R5431
R5432
R5441
R5442
R6507
R6509
E-5
F-2
F-2
F-2
F-5
D-3
F-9
F-8
G-8
F-8
F-8
F-9
G-9
F-9
D-6
D-6
D-5
B-8
B-6
B-7
B-6
B-7
C-8
B-7
C-8
F-6
F-5
F-5
E-6
E-5
F-5
F-5
E-5
F-5
F-6
E-6
E-6
E-6
E-3
E-3
E-3
E-3
E-2
D-2
D-2
E-1
E-1
E-1
E-1
D-2
D-2
F-2
F-1
* X1501
X4501
X5001
X5002
* RB1551 C-1
* RB1552 C-1
RB1553 D-3
* RB2401 A-7
* RB3201 A-4
* RB3202 A-4
* RB3303 F-2
* RB3304 F-6
* RB3305 E-6
* RB3307 E-5
RB4501 C-8
RB4508 C-8
RB4509 B-8
RB4510 A-6
RB4511 C-5
RB4512 A-6
* RB4514 B-8
RB4515 B-8
RB5001 F-6
RB5002 F-6
RB5006 F-6
RB5007 F-6
RB5008 F-5
RB5009 F-6
RB5011 G-5
* RB5401 F-2
* RB5402 F-2
* RB6501 F-1
VC-344, PD-204, SI-041
B-3
D-5
E-6
F-5
C6001
C6002
C6003
C6004
C6005
C6006
C6007
C6009
C6010
C6011
C6012
C6013
C6015
C6016
C6019
C6020
C6022
C6024
C6026
C6027
C6028
C6029
A-2
B-2
A-3
A-2
A-2
B-3
A-4
B-2
B-2
A-5
D-3
C-4
C-2
C-2
A-3
A-3
C-2
C-2
C-3
C-3
B-3
B-3
CN6001
CN6003
CN6004
CN6005
B-1
D-4
D-1
C-1
D6004
D6006
D6009
D-3
B-3
B-3
SI-041 BOARD
*
*
*
*
CN751
CN752
CN753
CN754
D751
D752
* D753
* D754
* D755
D756
D759
C-2
C-2
B-2
B-2
D-3
C-2
C-2
* IC751
C-2
* J751
* J752
D-2
A-1
Q751
A-2
R752
R753
R756
R757
R763
R764
R765
B-2
B-2
C-3
D-3
B-2
C-3
D-3
*
*
*
*
FB6001 B-2
IC6001 B-2
L6001
L6002
L6003
L6004
A-3
A-4
A-4
C-3
Q6002
Q6004
Q6005
Q6008
Q6009
A-4
C-2
C-2
C-3
C-3
R6005
R6009
R6010
R6012
R6013
R6014
R6019
R6020
R6026
R6030
R6031
R6032
R6039
R6040
R6041
B-4
B-2
D-3
B-2
B-2
D-3
C-2
C-2
C-3
B-3
B-3
B-2
C-3
C-3
C-3
RB6001 C-2
RB6002 C-2
RB6003 B-2
T6001
B-1
C-1
D-4
C-4
B-4
4-54E
DCR-TRV255E/TRV260/TRV265/TRV265E
NOTE
5. REPAIR PARTS LIST
NOTE: Characters A to L of the electrical parts list indicate location of exploded views in which the desired part is shown.
EXPLODED VIEWS
Link
A
OVERALL ASSEMBLY
B
FRONT PANEL BLOCK
E
LENS BLOCK
EVF BLOCK
G
BATTERY PANEL BLOCK
J
I
LS CHASSIS BLOCK ASSEMBLY
Link
D
LCD BLOCK
F
CABINET R BLOCK
CASSETTE COMPARTMENT
ASSEMBLY, DRUM ASSEMBLY
C
H
MD FRAME BLOCK
K
MECHANICAL CHASSIS
BLOCK ASSEMBLY-1
L
MECHANICAL CHASSIS
BLOCK ASSEMBLY-2
ELECTRICAL PARTS LIST
ACCESSORIES
CD-471 BOARD
C
FP-792 FLEXIBLE BOARD
B
SI-041 BOARD
B
FP-300 FLEXIBLE BOARD
J
FP-802 FLEXIBLE BOARD
J
VC-344 BOARD
H
FP-301 FLEXIBLE BOARD
J
PD-204 BOARD (TYPE C)
D
FP-302 FLEXIBLE BOARD
J
PD-204 BOARD (TYPE S)
D
DCR-TRV255E/TRV260/TRV265/TRV265E
5. REPAIR PARTS LIST
NOTE:
• -XX, -X mean standardized parts, so they may have some differences from
the original one.
• Items marked “*” are not stocked since they are seldom required for routine
service. Some delay should be anticipated when ordering these items.
• The mechanical parts with no reference number in the exploded views are not
supplied.
• Due to standardization, replacements in the parts list may be different from
the parts specified in the diagrams or the components used on the set.
• CAPACITORS:
uF: µF
• COILS
uH: µH
• RESISTORS
All resistors are in ohms.
METAL: metal-film resistor
METAL OXIDE: Metal Oxide-film resistor
F: nonflammable
• SEMICONDUCTORS
In each case, u: µ, for example:
uA...: µA... , uPA... , µPA... ,
uPB... , µPB... , uPC... , µPC... ,
uPD..., µPD...
• Abbreviation
AUS : Australian model
CND : Canadian model
EE : East European model
JE : Tourist model
NE : North European model
5-1
When indicating parts by reference number,
please include the board name.
The components identified by mark 0 or
dotted line with mark 0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
le numéro spécifié.
About PD-204 board and LCD module, discriminate LCD type on the machine referring
to page 1-3, and replace the same type.
DCR-TRV255E/TRV260/TRV265/TRV265E
5. REPAIR PARTS LIST
5-1. EXPLODED VIEWS
5-1-1. OVERALL ASSEMBLY
6
EVF block
(See page 5-7.)
2
2
2
2
7
5
MD frame block
(See page 5-9.)
2
11
Battery panel block
(See page 5-8.)
8
2
3
10
2
4
9
Cabinet R block
(See page 5-6.)
2
ns
Front panel block
(See page 5-3.)
2 11
11
2
LCD block
(See page 5-5.)
Lens block
(See page 5-4.)
1
Ref. No.
Part No.
Description
1
2
3
4
4
X-3953-989-1
3-080-203-31
3-087-813-01
3-087-812-21
3-087-812-31
CABINET (C) (587) ASSY, P
SREW (M2), LOCK ACE, P2
COVER (51), JACK
SHEET (51), JACK (TRV255E)
SHEET (51), JACK (TRV260/TRV265/TRV265E)
5
3-087-811-01 CABINET (UPPER) (51)
Ref. No.
5-2
Part No.
Description
6
7
8
9
10
3-078-889-11
3-087-810-01
CAUTION
3-079-012-01
3-087-831-21
SCREW (M1.7)
LID (51), CPC
RETAINER (51), EVF FLEXIBLE
SCREW (30), TRIPOD
LABEL (51)
11
3-080-204-21 SCREW, TAPPING, P2
CAUTION :
For the part of 8 : RETAINER (51), EVF FLEXIBLE
(3-088-616-01), cut WOVEN (T0.25), FABRIC NON
(3-076-631-01) into the desired length and use it.
DCR-TRV255E/TRV260/TRV265/TRV265E
5. REPAIR PARTS LIST
5-1-2. FRONT PANEL BLOCK
61
ns: not supplied
60
D002 D001
58
J752 D003
CN751
D753
58
ns
D754
CN752
SI-
04
IC751
1
J751
58
53
59
57
56
55
ns
54
58
ns
62
52
MIC901
51
(Note)
Ref. No.
Part No.
Description
51
52
53
53
54
3-087-738-11
3-087-740-01
X-3953-990-1
X-3953-991-1
3-087-739-01
RETAINER (51), MICROPHONE
PLATE (51), MAGNIFICATION
PANEL (587) ASSY, FRONT (TRV255E/TRV260)
PANEL (590) ASSY, FRONT (TRV265/TRV265E)
PLATE (51), NAME
55
56
57
58
59
3-087-743-01
3-087-742-01
3-087-749-01
3-080-204-21
A-7111-952-A
SCREW (51), FILTER
RING (51), FRONT
COVER (51), S TERMINAL
SCREW, TAPPING, P2
SI-041 BOARD, COMPLETE (Note)
60
61
62
1-860-929-11 FP-792 FLEXIBLE BOARD
3-087-994-01 CUSHION (51), JACK
3-088-031-01 CUSHION (51), MICROPHONE
Ref. No.
CN751
CN751, CN752, D753, D754, IC751, J751 and J752 are
not included in SI-041 complete board.
Part No.
Description
D001
D002
D003
1-794-276-11 CONNECTOR, SQUARE TYPE 4P (DV OUT/DV)
(Note)
1-794-962-11 CONNECTOR, SQUARE TYPE (USB 5P) (USB)
(Note)
6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT)
6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT)
6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT)
D753
D754
IC751
J751
J752
8-719-060-65
8-719-060-65
6-704-975-01
1-778-518-11
1-778-040-11
CN752
DIODE DCC3810 (IR EMITTER) (Note)
DIODE DCC3810 (IR EMITTER) (Note)
IC RPM7240-V4 (Note)
CONNECTOR, EXTERNAL (S VIDEO OUT) (Note)
JACK, SMALL TYPE (A/V OUT) (Note)
MIC901 1-542-513-11 MICROPHONE
5-3
DCR-TRV255E/TRV260/TRV265/TRV265E
5. REPAIR PARTS LIST
5-1-3. LENS BLOCK
104
105
CD
-47
1
103
102
IC951
(Note)
101
(Note)
Ref. No.
101
102
103
104
Part No.
Description
8-848-765-01
1-758-554-11
3-053-973-01
A-7111-947-A
DEVICE, LENS LSV-820A
FILTER BLOCK, OPTICAL
RUBBER (W), SEAL
CD-471 BOARD, COMPLETE
Ref. No.
105
IC951
IC951
5-4
Be sure to read “Precuations for Replacement of CCD
Imager” on page 4-8 when changing the CCD imager.
Part No.
Description
3-080-204-21 SCREW, TAPPING, P2
A-7013-401-A CCD BLOCK ASSY (CCD IMAGER)
(TRV255E/TRV265E) (Note)
A-7016-724-A CCD BLOCK ASSY (CCD IMAGER)
(TRV260/TRV265) (Note)
DCR-TRV255E/TRV260/TRV265/TRV265E
5. REPAIR PARTS LIST
5-1-4. LCD BLOCK
151
LCD901
ND901
152
153
4
-20
PD
154
155
(Note)
About PD-204 board and LCD module, discriminate LCD
type on the machine referring to page 1-3, and replace
the same type.
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part number specified.
Ref. No.
Part No.
Description
Ref. No.
151
152
153
153
154
3-087-780-01
3-087-781-01
A-7111-949-A
A-7111-948-A
3-080-204-21
CABINET (M) (51), P
FRAME (51), PANEL
PD-204 BOARD, COMPLETE (TYPE S) (Note)
PD-204 BOARD, COMPLETE (TYPE C) (Note)
SCREW, TAPPING, P2
LCD901 1-805-137-51 INDICATOR MODULE LIQUID CRYSTAL
(TYPE S) (Note)
LCD901 1-805-138-21 INDICATOR MODULE LIQUID CRYSTAL
(TYPE C) (Note)
0 ND901 1-518-951-11 TUBE, FLUORESCENT, COLD CATHODE
155
3-078-889-11 SCREW (M1.7)
5-5
Part No.
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
Description
DCR-TRV255E/TRV260/TRV265/TRV265E
5. REPAIR PARTS LIST
5-1-5. CABINET R BLOCK
202
203
201
%
203
204
205
203
203
206
209
207
208
210
! : Included
BT001 (BATTERY, LITHIUM SECONDARY)
in the control switch block (CF-5100).
Ref. No.
Part No.
Description
201
202
203
204
205
1-478-416-21
3-080-206-11
3-080-205-21
1-962-648-11
3-087-826-01
KEY BLOCK, CONTROL (CF-5100)
SCREW, TAPPING, P2
SCREW, TAPPING, P2
HARNESS (PD-124)
COVER (M) (51), HINGE
206
3-087-825-11 COVER (C) (51), HINGE
Ref. No.
207
208
209
210
210
5-6
Part No.
Description
3-078-889-11
1-478-418-11
X-3953-962-1
X-3954-043-1
X-3953-988-1
SCREW (M1.7)
KEY BLOCK, CONTROL (PR-5100)
HINGE (51) ASSY
CABINET (R) (585) ASSY (TRV255E)
CABINET (R) (587) ASSY
(TRV260/TRV265/TRV265E)
DCR-TRV255E/TRV260/TRV265/TRV265E
5. REPAIR PARTS LIST
5-1-6. EVF BLOCK
ns: not supplied
251
253
254
255
252
254
ns
256
LCD902
ns
ns
257
258
Ref. No.
Part No.
Description
251
252
253
254
255
X-3953-982-1
X-3951-166-1
X-3953-966-1
3-080-204-21
X-3953-967-1
CABINET (UPPER) (587) ASSY, EVF
LENS (M) ASSY, VF
CABINET (LOWER) (515) ASSY, EVF
SCREW, TAPPING, P2
BASE (51) ASSY, SLDE
256
3-087-788-01 BASE (51), SLIDE
Ref. No.
Part No.
Description
257
3-080-203-31 SCREW (M2), LOCK ACE, P2
258
1-860-928-11 FP-797 FLEXIBLE BOARD
LCD902 1-805-465-61 INDICATOR MODULE LIQUID CRYSTAL
(TRV260/TRV265)
LCD902 1-805-465-81 INDICATOR MODULE LIQUID CRYSTAL
(TRV255E/TRV265E)
5-7
DCR-TRV255E/TRV260/TRV265/TRV265E
5. REPAIR PARTS LIST
5-1-7. BATTERY PANEL BLOCK
ns: not supplied
ns
304
BT901
301
303
302
Ref. No.
301
302
303
Part No.
Description
Ref. No.
3-087-799-01 SHEET METAL (LOWER) (51), STRAP
3-078-889-11 SCREW (M1.7)
X-3953-968-1 PANEL (515) ASSY, BATTERY
304
BT901
5-8
Part No.
Description
3-072-305-01 LID (2500), JACK
1-694-772-11 TERMINAL BOARD, BATTERY
DCR-TRV255E/TRV260/TRV265/TRV265E
5. REPAIR PARTS LIST
5-1-8. MD FRAME BLOCK
365
ns: not supplied
366
351
ns
352
367
364
ns
363
353
ns
362
354
365
Mechanism deck block
(See page 5-10 to 5-13.)
ns
355
355
355
356
355
355
357
Ref. No.
4
34
361
359
358
Ref. No.
VC
360
Part No.
Description
Part No.
Description
351
352
353
354
355
1-478-417-31
3-080-253-01
X-3953-958-2
3-080-204-21
3-078-889-11
KEY BLOCK, CONTROL (SS-5100)
SCREW (M1.7), LOCK ACE, P2
FRAME (51) ASSY, CS
SCREW, TAPPING, P2
SCREW (M1.7)
361
362
363
364
365
3-089-368-01
X-3953-957-1
3-978-765-01
3-087-802-01
3-080-203-31
LABEL, FUSE REPLACEMENT (51) (TRV260)
CABINET (L) (51) ASSY
SLIDER, G LOCK
BELT (51), GRIP
SREW (M2), LOCK ACE, P2
356
357
358
359
360
3-066-169-01
3-087-809-01
1-860-927-11
A-7112-398-A
1-827-980-11
SHEET (30), MD
FRAME (51), MD
FP-796 FLEXIBLE BOARD
VC-344 BOARD, COMPLETE (SERVICE)
CABLE, FLEXIBLE FLAT (FFC-005)
366
366
366
366
367
3-087-833-01
3-087-833-11
3-087-833-31
3-087-833-41
3-080-204-11
LABEL (L) (56) (TRV255E)
LABEL (L) (56) (TRV260)
LABEL (L) (56) (TRV265)
LABEL (L) (56) (TRV265E)
SCREW, TAPPING, P2
5-9
DCR-TRV255E/TRV260/TRV265/TRV265E
5. REPAIR PARTS LIST
5-1-9. CASSETTE COMPARTMENT ASSEMBLY, DRUM ASSEMBLY
ns: not supplied
701
702
701
703
705
706
704
707
708
LS chassis block
assembly
(See page 5-11.)
M901
709
712
711
Mechanical chassis block
assembly
(See page 5-12 to 5-13.)
710
Ref. No.
Part No.
Description
701
702
703
704
705
3-065-932-01
3-065-895-01
3-065-896-01
X-3951-298-1
X-3951-302-1
PAN (2 MAIN M1.4X1.6), CAMERA
LEVER, REEL RELEASE
PLATE, BLIND
CASSETTE COMPARTMENT ASSY
DAMPER ASSY
706
707
X-3951-297-1 GEAR ASSY, R DRIVE
3-065-840-01 CUT (0.98X3X0.13), LUMILER (W)
Ref. No.
5-10
Part No.
Description
708
709
710
711
712
3-065-935-01
3-947-503-01
X-3951-299-1
3-074-309-01
7-624-101-04
HLC CUT 1.8X4X0.5
SCREW (M1.4)
SCREW ASSY, DRUM FITTING
ROLLER A, LS GUIDE
STOP RING 1.2 (E TYPE)
M901
A-7048-986-A DRUM (DKH-04B-R) (SERVICE)
DCR-TRV255E/TRV260/TRV265/TRV265E
5. REPAIR PARTS LIST
5-1-10. LS CHASSIS BLOCK ASSEMBLY
759
ns: not supplied
757
760
767
S001
764
766
758
768
763
769
765
770
761
762
756
771
755
772
781
752
S002
Q001
775
778
780
776
H001
779
774
FP-802
ns
H002
777
Q002
FP-301
ns
773
D001
FP-302
ns
FP-300
ns
ns
754
753
752
783
751
Ref. No.
Part No.
Description
Part No.
Description
751
752
753
754
755
3-065-822-02
3-947-503-01
A-7096-416-B
A-7096-415-A
A-7096-426-A
RAIL (S), GUIDE
SCREW (M1.4)
BASE (S) BLOCK ASSY, GUIDE
BASE (T) BLOCK ASSY, GUIDE
CHASSIS ASSY, LS
Ref. No.
771
772
773
774
775
3-065-830-01
X-3951-288-1
3-065-819-01
3-065-821-01
X-3951-289-1
SPRING, S RATCHET
TABLE (T) ASSY, REEL
SPRING, TG1 ARM
RAIL (T), GUIDE
TABLE (S) ASSY, REEL
756
757
758
759
760
3-065-802-01
A-7096-414-A
3-065-801-01
3-065-932-01
X-3951-303-1
SPRING, TG7 ARM
ARM BLOCK ASSY, TG7
RETAINER, TG7
PAN (2 MAIN M1.4X1.6), CAMERA
ARM ASSY, PINCH
776
777
778
779
780
3-065-833-01
3-065-831-01
X-3951-304-1
3-065-835-01
3-065-820-01
GUIDE, LOCK
PLATE (SPR), RE RETURN
ARM ASSY, TG1
GUIDE (S), CASSETTE
SPRING, RVS ARM
761
762
763
764
765
3-065-823-01
3-065-794-01
3-065-792-01
3-065-834-01
3-065-824-01
ARM, T RATCHET
ROAD (SPR), PINCH ARM
ROLLER, P LIM ARM
GUIDE (T), CASSETTE
SPRING, T RATCHET
781
783
D001
H001
H002
X-3951-296-1
3-067-167-01
8-719-988-42
8-719-033-37
8-719-033-37
BAND (ASSY), BT
SCREW (M1.4X2), CAMERA TAPPING
DIODE GL453 (TAPE LED)
ELEMENT, HALL HW-105C (T REEL)
ELEMENT, HALL HW-105C (S REEL)
766
767
768
769
770
A-7096-417-A
3-071-650-01
3-065-832-01
3-065-828-01
3-065-829-01
SOFT ASSY, T
SCREW (M1.7) (S)
PLATE, LS CAM
ARM, S RATCHET
PLATE, S RATCHET (RE)
Q001
Q002
S001
S002
8-729-907-25
8-729-907-25
1-692-614-11
1-572-688-11
PHOTO TRANSISTOR PT4850F (TAPE TOP)
PHOTO TRANSISTOR PT4850F (TAPE END)
SWITCH, PUSH (3 KEY) (REC PROOF)
SWITCH, PUSH LEVER (1 KEY) (C. C. LOCK)
5-11
DCR-TRV255E/TRV260/TRV265/TRV265E
5. REPAIR PARTS LIST
5-1-11. MECHANICAL CHASSIS BLOCK ASSEMBLY-1
ns: not supplied
816
811
805
815
819
824
ns
815
810
809
817
805
814
802
807
813
M902
812
815
802
821
820
M903
822
806
823
802
808
818
804
803
Mechanical chassis
block assembly-2
(See page 5-13.)
801
Ref. No.
Part No.
Description
Part No.
Description
801
802
803
804
805
A-7096-422-A
3-947-503-01
3-065-928-01
3-065-927-01
3-065-932-01
BASE ASSY, DRUM
SCREW (M1.4)
SPACER, GROUND
GROUND, DRUM
PAN (2 MAIN M1.4X1.6), CAMERA
Ref. No.
814
815
816
817
818
3-065-881-01
3-065-934-01
1-786-096-11
3-065-898-01
3-065-870-01
SPRING, P PRESSURE PLATE
HLW CUT 0.98X3X0.25
SWITCH, ROTARY
SPRING, EJECT ARM
ROLLER, LS GUIDE
806
807
808
809
810
3-067-154-01
3-065-931-01
X-3947-398-1
3-065-933-01
1-677-049-11
SPRING, CAPSTAN
RAIL (T2), GUIDE
SCREW ASSY, M1.7 PW
PAN (2 MAIN 1.4X4.5), CAMERA
FP-228 FLEXIBLE BOARD
819
820
821
822
823
A-7096-421-A
3-065-918-01
A-7096-419-A
3-065-902-01
3-065-905-01
ARM ASSY, HCL
GEAR (2), CAM RELAY
GEAR ASSY, CHANGE
BELT, TIMING
GEAR, RELAY
811
812
813
1-680-434-11 FP-299 FLEXIBLE BOARD
3-065-877-01 PLATE (T), GUIDE LOCK
X-3951-301-1 PLATE ASSY, PINCH PRESSURE
824
M902
M903
3-065-882-01 ARM, EJECT
8-835-701-01 MOTOR, DC SCE13A/C-NP (CAPSTAN)
A-7096-420-A MOTOR ASSY, LD (LOADING)
5-12
DCR-TRV255E/TRV260/TRV265/TRV265E
5. REPAIR PARTS LIST
5-1-12. MECHANICAL CHASSIS BLOCK ASSEMBLY-2
860
863
861
859
862
857
864
858
865
856
855
853
866
854
852
851
867
868
Ref. No.
Part No.
Description
851
852
853
854
855
3-065-920-01
3-065-913-01
3-065-914-01
3-065-917-01
3-065-934-01
ARM, HC DRIVE
GEAR (4), LD
SHEET, COVER
GEAR (1), CAM RELAY
HLW CUT 0.98X3X0.25
856
857
858
859
3-065-915-01
3-065-878-01
3-065-932-01
A-7096-413-A
GEAR (1), CAM
PLATE (S), GUIDE LOCK
PAN (2 MAIN M1.4X1.6), CAMERA
GEAR (S) ASSY, GUIDE
Ref. No.
5-13
Part No.
Description
860
861
862
863
864
7-624-101-04
A-7096-412-A
X-3951-307-1
X-3951-305-1
3-065-901-01
STOP RING 1.2 (E TYPE)
GEAR (T) ASSY, GUIDE
PLATE ASSY, M SLIDE
ARM ASSY, LS
ROLLER, LS ARM
865
866
867
868
3-065-916-01
3-065-919-01
X-3951-308-1
X-3951-300-2
GEAR (2), CAM
ARM, T1 LIMITTER
ARM ASSY, GL
CHASSIS ASSY, MECHANICAL
DCR-TRV255E/TRV260/TRV265/TRV265E
CD-471
FP-300
FP-301
FP-302
FP-792
FP-802
PD-204 (TYPE C)
5-2. ELECTRICAL PARTS LIST
Ref. No.
Part No.
Description
Ref. No.
A-7111-947-A CD-471 BOARD, COMPLETE
***********************
(IC951 is not included in this complete board.)
D002
D003
Part No.
6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT)
6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT)
< CAPACITOR >
C951
C953
C955
1-126-395-11 ELECT CHIP
1-128-994-21 ELECT CHIP
1-164-360-11 CERAMIC CHIP
FP-802 FLEXIBLE BOARD (Not Supplied)
********************
22uF
47uF
0.1uF
20%
20%
16V
10V
16V
< HOLE ELEMENT >
H001
H002
< CONNECTOR >
CN951
IC951
8-719-033-37 ELEMENT, HALL HW-105C (T REEL)
8-719-033-37 ELEMENT, HALL HW-105C (S REEL)
1-815-762-11 CONNECTOR, FFC/FPC 14P
< SWITCH >
< IC >
IC951
S001
S002
A-7013-401-A CCD BLOCK ASSY (CCD IMAGER) (Note)
(TRV255E/TRV265E)
A-7016-724-A CCD BLOCK ASSY (CCD IMAGER) (Note)
(TRV260/TRV265)
1-692-614-11 SWITCH, PUSH (3 KEY) (REC PROOF)
1-572-688-11 SWITCH, PUSH LEVER (1 KEY) (C.C. LOCK)
A-7111-949-A PD-204 BOARD, COMPLETE (TYPE C)
***********************
< COIL >
L951
1-469-528-91 INDUCTOR
< CAPACITOR >
100uH
2SC4178-F14
C6001
C6002
C6003
C6004
C6005
1-125-777-11
1-125-837-91
1-164-943-11
1-164-943-11
1-164-943-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
1uF
0.01uF
0.01uF
0.01uF
10%
10%
10%
10%
10%
10V
6.3V
16V
16V
16V
82
3.3K
0
C6006
C6007
C6009
C6010
C6011
1-164-943-11
1-115-566-11
1-125-777-11
1-164-739-11
1-163-023-00
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
4.7uF
0.1uF
560PF
0.015uF
10%
10%
10%
5%
10%
16V
10V
10V
50V
50V
C6012
C6013
C6015
C6019
C6020
1-125-777-11
1-100-371-11
1-127-573-11
1-104-847-11
1-110-457-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
TANTAL. CHIP
ELECT CHIP
0.1uF
12PF
1uF
22uF
3.3uF
10%
5%
10%
20%
20%
10V
3.15KV
16V
4V
25V
C6022
C6024
C6026
C6027
C6028
1-125-777-11
1-127-573-11
1-119-750-11
1-125-777-11
1-115-407-11
CERAMIC CHIP
CERAMIC CHIP
TANTAL. CHIP
CERAMIC CHIP
ELECT CHIP
0.1uF
1uF
22uF
0.1uF
10uF
10%
10%
20%
10%
10V
16V
6.3V
10V
16V
< TRANSISTOR >
Q951
8-729-117-73 TRANSISTOR
< RESISTOR >
R952
R953
R970
1-218-940-11 RES-CHIP
1-218-959-11 RES-CHIP
1-216-864-11 SHORT CHIP
5%
5%
1/16W
1/16W
FP-300 FLEXIBLE BOARD (Not Supplied)
********************
< PHOTO TRANSISTOR >
Q001
8-729-907-25 PHOTO TRANSISTOR PT4850F (TAPE TOP)
FP-301 FLEXIBLE BOARD (Not Supplied)
********************
< DIODE >
D001
Description
< CONNECTOR >
CN6001
CN6003
CN6004
CN6005
8-719-988-42 DIODE GL453S (TAPE LED)
FP-302 FLEXIBLE BOARD (Not Supplied)
********************
1-794-997-11
1-764-709-11
1-815-031-11
1-816-176-11
PIN, CONNECTOR 20P
FFC/CONNECTOR, FPC (LIF) 10P
CONNECTOR, FFC/FPC (ZIF) 24P
CONNECTOR, FFC/FPC (ZIF) 6P
< DIODE >
< PHOTO TRANSISTOR >
Q002
D6004
D6009
8-729-907-25 PHOTO TRANSISTOR PT4850F (TAPE END)
8-719-073-01 DIODE MA111-(K8).S0
8-719-071-34 DIODE RB521S-30-TE61
< FERRITE BEAD >
1-860-929-11 FP-792 FLEXIBLE BOARD
********************
(D001, D002 and D003 are not included in this flexible board.)
FB6001 1-414-760-21 FERRITE, EMI (SMD) (1608)
< IC >
< DIODE >
IC6001
D001
6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT)
Note: Be sure to read “Precautions for Replacement of
CCD Imager” on page 4-8 when changing the
CCD imager.
5-14
6-705-329-01 IC CM7104L42-T4
DCR-TRV255E/TRV260/TRV265/TRV265E
PD-204 (TYPE C)
Ref. No.
Part No.
Description
Ref. No.
Part No.
< COIL >
L6001
L6002
L6003
L6004
1-469-527-91
1-412-056-11
1-428-878-11
1-469-526-91
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
6-550-065-01 TRANSISTOR
Description
< CONNECTOR >
47uH
4.7uH
82uH
22uH
CN6001
CN6003
CN6004
CN6005
1-794-997-11
1-764-709-11
1-815-031-11
1-816-176-11
PIN, CONNECTOR 20P
CONNECTOR, FFC/FPC (LIF) 10P
FFC/CONNECTOR, FPC (ZIF) 24P
CONNECTOR, FFC/FPC (ZIF) 6P
< DIODE >
< TRANSISTOR >
Q6002
PD-204 (TYPE S)
CPH5504-TL-E
D6004
D6006
D6009
< RESISTOR >
8-719-988-61 DIODE 1SS355TE-17
8-719-988-61 DIODE 1SS355TE-17
8-719-071-34 DIODE RB521S-30-TE61
R6005
R6009
R6010
R6012
R6013
1-216-824-11
1-218-975-11
1-218-969-11
1-208-707-11
1-208-935-11
METAL CHIP
RES-CHIP
RES-CHIP
METAL CHIP
METAL CHIP
1.8K
68K
22K
10K
100K
5%
5%
5%
0.5%
0.5%
1/10W
1/16W
1/16W
1/16W
1/16W
< FERRITE BEAD >
FB6001 1-414-760-21 FERRITE, EMI (SMD) (1608)
R6014
R6019
R6020
R6026
R6030
1-218-949-11
1-218-990-11
1-218-990-11
1-218-990-11
1-218-962-11
RES-CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
RES-CHIP
470
0
0
0
5.6K
5%
1/16W
IC6001
5%
1/16W
R6031
R6032
1-218-990-11 SHORT CHIP
1-218-978-11 RES-CHIP
0
120K
5%
1/16W
< IC >
6-705-330-01 IC LRS57231
< COIL >
L6001
L6002
L6003
L6004
1-469-527-91
1-412-056-11
1-428-878-11
1-469-526-91
47uH
4.7uH
82uH
22uH
< TRANSISTOR >
< COMPOSITION CIRCUIT BLOCK >
Q6002
Q6004
Q6005
Q6008
Q6009
RB6003 1-234-372-21 RES, NETWORK 100 x 4 (1005)
< TRANSFORMER >
0 T6001
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
1-435-786-31 TRANSFORMER, INVERTER
6-550-065-01
8-729-054-48
8-729-054-48
6-550-242-01
6-550-232-01
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
CPH5504-TL-E
UP04601008S0
UP04601008S0
DTC114EMT2L
2SA2029T2LQ/R
< RESISTOR >
A-7111-948-A PD-204 BOARD, COMPLETE (TYPE S)
***********************
< CAPACITOR >
C6001
C6002
C6003
C6004
C6005
1-125-777-11
1-125-837-91
1-164-943-11
1-164-943-11
1-164-943-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
1uF
0.01uF
0.01uF
0.01uF
10%
10%
10%
10%
10%
10V
6.3V
16V
16V
16V
C6006
C6007
C6009
C6010
C6011
1-164-943-11
1-115-566-11
1-125-777-11
1-164-739-11
1-163-023-00
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
4.7uF
0.1uF
560PF
0.015uF
10%
10%
10%
5%
10%
16V
10V
10V
50V
50V
C6012
C6013
C6015
C6016
C6019
1-125-777-11
1-100-371-11
1-127-573-11
1-100-249-11
1-104-847-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
TANTAL. CHIP
0.1uF
12PF
1uF
0.01uF
22uF
10%
5%
10%
10%
20%
10V
3.15KV
16V
16V
4V
C6020
C6022
C6024
C6026
C6027
1-110-457-11
1-125-777-11
1-127-573-11
1-119-750-11
1-125-777-11
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
TANTAL. CHIP
CERAMIC CHIP
3.3uF
0.1uF
1uF
22uF
0.1uF
20%
10%
10%
20%
10%
25V
10V
16V
6.3V
10V
C6028
C6029
1-115-407-11 ELECT CHIP
1-125-827-91 CERAMIC CHIP
10uF
1uF
10%
16V
25V
R6005
R6009
R6010
R6012
R6013
1-216-824-11
1-218-975-11
1-218-969-11
1-208-707-11
1-208-935-11
METAL CHIP
RES-CHIP
RES-CHIP
METAL CHIP
METAL CHIP
1.8K
68K
22K
10K
100K
5%
5%
5%
0.5%
0.5%
1/10W
1/16W
1/16W
1/16W
1/16W
R6014
R6030
R6039
R6040
R6041
1-218-949-11
1-218-962-11
1-218-960-11
1-218-973-11
1-218-953-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
470
5.6K
3.9K
47K
1K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
< COMPOSITION CIRCUIT BLOCK >
RB6001 1-234-378-21 RES, NETWORK 10K x 4 (1005)
RB6002 1-234-384-11 RES, NETWORK 1M x 4 (1005)
RB6003 1-234-372-21 RES, NETWORK 100 x 4 (1005)
< TRANSFORMER >
0 T6001
5-15
1-435-786-31 TRANSFORMER, INVERTER
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
DCR-TRV255E/TRV260/TRV265/TRV265E
SI-041
Ref. No.
VC-344
Part No.
Description
Ref. No.
A-7111-952-A SI-041 BOARD, COMPLETE
**********************
(CN751, CN752, D753, D754, IC751, J751 and J752
are not included in this complete board.)
< CONNECTOR >
CN751
CN752
CN753
CN754
1-794-276-12
1-794-962-11
1-816-232-21
1-818-074-21
CONNECTOR, SQUARE TYPE 4P (DV OUT/DV)
CONNECTOR SQUARE TYPE (USB 5P) (USB)
PIN, CONNECTOR (PC BOARD) 4P
CONNECTOR, FFC/FPC (ZIF) 36P
< DIODE >
D751
D752
D753
D754
D755
6-500-044-01
6-500-044-01
8-719-060-65
8-719-060-65
8-719-421-27
DIODE
DIODE
DIODE
DIODE
DIODE
DF6A6.8FU (TE85R)
DF6A6.8FU (TE85R)
DCC3810 (IR EMITTER)
DCC3810 (IR EMITTER)
MA728
D756
D759
6-500-009-01 DIODE RSE6.8XN-TR
6-500-506-01 DIODE TLRMV1021 (T15SOY, F) (TALLY)
< IC >
IC751
6-704-975-01 IC RPM7240-V4 (TRV265/TRV265E)
< JACK >
J751
J752
1-778-518-12 CONNECTOR, EXTERNAL (S VIDEO OUT)
1-778-040-11 JACK, SMALL TYPE (A/V OUT)
Part No.
Description
C1313
C1314
1-117-720-11 CERAMIC CHIP
1-127-988-81 CERAMIC CHIP
4.7uF
15000PF
C1315
C1316
C1317
C1318
C1319
1-125-777-11
1-127-988-81
1-164-943-11
1-165-908-11
1-164-506-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
15000PF
0.01uF
1uF
4.7uF
10%
10%
10%
10%
10V
16V
16V
10V
16V
C1320
C1321
C1322
C1323
C1324
1-109-982-11
1-115-566-11
1-115-566-11
1-125-838-11
1-127-861-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
4.7uF
4.7uF
2.2uF
2.2uF
10%
10%
10%
10%
10%
10V
10V
10V
6.3V
16V
C1325
C1326
C1327
C1328
C1329
1-164-505-11
1-115-566-11
1-127-861-11
1-109-982-11
1-115-566-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
2.2uF
4.7uF
2.2uF
1uF
4.7uF
10%
10%
10%
10%
16V
10V
16V
10V
10V
C1330
C1331
C1332
C1333
C1334
1-127-760-11
1-115-566-11
1-127-760-11
1-127-760-11
1-109-982-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
4.7uF
4.7uF
4.7uF
4.7uF
1uF
10%
10%
10%
10%
10%
6.3V
10V
6.3V
6.3V
10V
C1335
C1336
C1337
C1338
C1339
1-164-505-11
1-115-566-11
1-115-566-11
1-127-861-11
1-115-566-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
2.2uF
4.7uF
4.7uF
2.2uF
4.7uF
10%
10%
10%
10%
16V
10V
10V
16V
10V
C1340
C1341
C1342
C1343
C1344
1-135-259-11
1-125-827-91
1-125-777-11
1-135-259-11
1-135-259-11
TANTAL. CHIP
CERAMIC CHIP
CERAMIC CHIP
TANTAL. CHIP
TANTAL. CHIP
10uF
1uF
0.1uF
10uF
10uF
20%
10%
10%
20%
20%
6.3V
25V
10V
6.3V
6.3V
C1345
C1346
C1347
C1348
C1349
1-135-259-11
1-135-259-11
1-135-259-11
1-135-259-11
1-104-847-11
TANTAL. CHIP
TANTAL. CHIP
TANTAL. CHIP
TANTAL. CHIP
TANTAL. CHIP
10uF
10uF
10uF
10uF
22uF
20%
20%
20%
20%
20%
6.3V
6.3V
6.3V
6.3V
4V
C1350
C1351
C1352
C1355
C1357
1-135-259-11
1-104-847-11
1-127-760-11
1-127-760-11
1-164-505-11
TANTAL. CHIP
TANTAL. CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10uF
22uF
4.7uF
4.7uF
2.2uF
20%
20%
10%
10%
6.3V
4V
6.3V
6.3V
16V
C1371
C1373
C1501
C1502
C1503
1-165-897-11
1-107-826-11
1-164-858-11
1-125-777-11
1-164-858-11
TANTAL. CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
22uF
0.1uF
22PF
0.1uF
22PF
20%
10%
5%
10%
5%
10V
16V
50V
10V
50V
C1504
C1507
C1508
C1509
C1510
1-115-467-11
1-127-760-11
1-125-837-91
1-164-943-11
1-164-844-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.22uF
4.7uF
1uF
0.01uF
4PF
10%
10%
10%
10%
0.25PF
10V
6.3V
6.3V
16V
50V
C1511
C1512
C1515
C1516
C1518
1-115-339-11
1-164-943-11
1-115-467-11
1-162-970-11
1-125-837-91
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.01uF
0.22uF
0.01uF
1uF
10%
10%
10%
10%
10%
50V
16V
10V
25V
6.3V
10%
10V
16V
< TRANSISTOR >
Q751
8-729-023-22 TRANSISTOR
2SD2114K
< RESISTOR >
R752
R753
R756
R757
R763
1-216-806-11
1-216-806-11
1-216-864-11
1-216-864-11
1-216-821-11
METAL CHIP
METAL CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
R764
R765
1-216-833-11 METAL CHIP
1-216-833-11 METAL CHIP
56
56
0
0
1K
5%
5%
1/10W
1/10W
5%
1/10W
10K
10K
5%
5%
1/10W
1/10W
A-7112-398-A VC-344 BOARD, COMPLETE (SERVICE)
***********************
< CAPACITOR >
C1001
C1003
C1301
C1302
C1303
1-125-777-11
1-127-760-11
1-125-777-11
1-107-819-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
4.7uF
0.1uF
0.022uF
0.1uF
10%
10%
10%
10%
10%
10V
6.3V
10V
16V
10V
C1304
C1305
C1307
C1308
C1309
1-164-942-11
1-100-251-11
1-125-777-11
1-164-940-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.0068uF
0.047uF
0.1uF
0.0033uF
0.1uF
10%
10%
10%
10%
10%
16V
10V
10V
16V
10V
C1310
C1311
C1312
1-164-938-11 CERAMIC CHIP
1-125-777-11 CERAMIC CHIP
1-125-837-91 CERAMIC CHIP
0.0015uF 10%
0.1uF
10%
1uF
10%
50V
10V
6.3V
5-16
DCR-TRV255E/TRV260/TRV265/TRV265E
VC-344
Ref. No.
Part No.
Description
C1523
C1524
C1525
C1527
C1530
1-107-826-11
1-104-847-11
1-125-837-91
1-127-861-11
1-125-837-91
CERAMIC CHIP
TANTAL. CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
22uF
1uF
2.2uF
1uF
10%
20%
10%
10%
10%
16V
4V
6.3V
16V
6.3V
Ref. No.
C1532
C1552
C1554
C1556
C1558
1-100-696-91
1-164-943-11
1-164-941-11
1-127-760-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.01uF
0.0047uF
4.7uF
0.1uF
10%
10%
10%
10%
10%
6.3V
16V
16V
6.3V
10V
C1559
C1560
C1561
C1562
C1563
1-107-826-11
1-164-935-11
1-164-943-11
1-115-467-11
1-165-708-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
0.1uF
470PF
0.01uF
0.22uF
47uF
10%
10%
10%
10%
20%
16V
50V
16V
10V
6.3V
C1564
C1565
C1566
C1568
C1571
1-164-937-11
1-117-863-11
1-164-943-11
1-164-939-11
1-127-760-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.001uF
0.47uF
0.01uF
0.0022uF
4.7uF
10%
10%
10%
10%
10%
50V
6.3V
16V
50V
6.3V
C1573
C1574
C1575
C1601
C2401
1-164-937-11
1-125-777-11
1-125-777-11
1-117-720-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.001uF
0.1uF
0.1uF
4.7uF
0.1uF
10%
10%
10%
10%
50V
10V
10V
10V
10V
C2402
C2403
C2406
C2407
C2409
1-125-777-11
1-100-246-11
1-125-837-91
1-100-251-11
1-100-249-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.001uF
1uF
0.047uF
0.01uF
10%
10%
10%
10%
10%
10V
50V
6.3V
10V
16V
C2411
C2412
C2413
C2414
C2415
1-164-943-11
1-164-943-11
1-125-777-11
1-125-777-11
1-164-943-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
0.01uF
0.1uF
0.1uF
0.01uF
10%
10%
10%
10%
10%
16V
16V
10V
10V
16V
C2416
C2417
C2418
C2420
C2422
1-125-777-11
1-125-777-11
1-164-943-11
1-125-777-11
1-125-837-91
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.01uF
0.1uF
1uF
10%
10%
10%
10%
10%
10V
10V
16V
10V
6.3V
C2423
C2424
C2427
C2428
C2429
1-125-777-11
1-164-943-11
1-125-838-11
1-125-777-11
1-107-819-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.01uF
2.2uF
0.1uF
0.022uF
10%
10%
10%
10%
10%
10V
16V
6.3V
10V
16V
C2430
C2431
C2433
C2434
C2435
1-125-837-91
1-164-937-11
1-125-777-11
1-164-937-11
1-119-923-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.001uF
0.1uF
0.001uF
0.047uF
10%
10%
10%
10%
10%
6.3V
50V
10V
50V
10V
C2436
C2437
C2438
C2439
C2440
1-164-935-11
1-107-826-11
1-125-777-11
1-164-937-11
1-107-826-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
470PF
0.1uF
0.1uF
0.001uF
0.1uF
10%
10%
10%
10%
10%
50V
16V
10V
50V
16V
C2442
C3201
C3202
1-125-777-11 CERAMIC CHIP
1-127-760-11 CERAMIC CHIP
1-164-943-11 CERAMIC CHIP
0.1uF
4.7uF
0.01uF
10%
10%
10%
10V
6.3V
16V
5-17
Part No.
Description
C3203
C3204
1-127-760-11 CERAMIC CHIP
1-164-943-11 CERAMIC CHIP
4.7uF
0.01uF
10%
10%
6.3V
16V
C3205
C3206
C3208
C3210
C3211
1-117-863-11
1-100-249-11
1-117-863-11
1-164-943-11
1-164-943-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.47uF
0.01uF
0.47uF
0.01uF
0.01uF
10%
10%
10%
10%
10%
6.3V
16V
6.3V
16V
16V
C3212
C3213
C3214
C3215
C3217
1-164-942-11
1-164-942-11
1-164-943-11
1-164-943-11
1-164-943-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.0068uF
0.0068uF
0.01uF
0.01uF
0.01uF
10%
10%
10%
10%
10%
16V
16V
16V
16V
16V
C3218
C3219
C3220
C3221
C3223
1-164-874-11
1-164-872-11
1-164-874-11
1-164-878-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100PF
82PF
100PF
150PF
0.1uF
5%
5%
5%
5%
10%
50V
50V
50V
50V
10V
C3304
C3305
C3306
C3309
C3310
1-164-943-11
1-125-837-91
1-164-943-11
1-164-943-11
1-127-760-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
1uF
0.01uF
0.01uF
4.7uF
10%
10%
10%
10%
10%
16V
6.3V
16V
16V
6.3V
C3313
C3314
C3319
C3320
C3321
1-164-943-11
1-127-760-11
1-127-760-11
1-164-943-11
1-127-760-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
4.7uF
4.7uF
0.01uF
4.7uF
10%
10%
10%
10%
10%
16V
6.3V
6.3V
16V
6.3V
C3322
C3326
C3327
C3328
C3331
1-127-760-11
1-164-943-11
1-164-943-11
1-125-777-11
1-124-779-00
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
4.7uF
0.01uF
0.01uF
0.1uF
10uF
10%
10%
10%
10%
20%
6.3V
16V
16V
10V
16V
C3332
C3333
C3335
C3336
C3338
1-164-943-11
1-127-760-11
1-164-943-11
1-125-777-11
1-125-837-91
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
4.7uF
0.01uF
0.1uF
1uF
10%
10%
10%
10%
10%
16V
6.3V
16V
10V
6.3V
C3339
C3341
C3342
C3344
C3345
1-164-882-11
1-127-760-11
1-127-760-11
1-107-826-11
1-107-826-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
220PF
4.7uF
4.7uF
0.1uF
0.1uF
5%
10%
10%
10%
10%
16V
6.3V
6.3V
16V
16V
C3357
C3358
C4003
C4004
C4005
1-164-943-11
1-164-943-11
1-107-819-11
1-165-875-11
1-165-875-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
0.01uF
0.022uF
10uF
10uF
10%
10%
10%
10%
10%
16V
16V
16V
10V
10V
C4501
C4503
C4504
C4505
C4506
1-100-249-11
1-164-850-11
1-164-850-11
1-125-777-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
10PF
10PF
0.1uF
0.1uF
10%
0.5PF
0.5PF
10%
10%
16V
50V
50V
10V
10V
C4507
C4508
C4509
C4510
C4511
1-125-777-11
1-125-777-11
1-125-837-91
1-125-777-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
1uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
10V
10V
6.3V
10V
10V
DCR-TRV255E/TRV260/TRV265/TRV265E
VC-344
Ref. No.
Part No.
Description
C4512
C4514
C4515
C4516
C4517
1-125-777-11
1-125-837-91
1-125-837-91
1-125-777-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
C4518
Ref. No.
0.1uF
1uF
1uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
10V
6.3V
6.3V
10V
10V
1-218-977-11 RES-CHIP
100K
5%
C4519
1-218-977-11 RES-CHIP
100K
5%
C4520
C5002
C5003
1-164-943-11 CERAMIC CHIP
1-164-943-11 CERAMIC CHIP
1-164-941-11 CERAMIC CHIP
0.01uF
10%
0.01uF
10%
0.0047uF 10%
1/16W
(Note)
1/16W
(Note)
16V
16V
16V
C5004
C5005
C5006
C5008
C5009
1-125-777-11
1-164-856-81
1-100-249-11
1-164-856-81
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
18PF
0.01uF
18PF
0.1uF
10%
5%
10%
5%
10%
10V
50V
16V
50V
10V
C5010
C5401
C5404
C5405
C5408
1-124-778-00
1-124-779-00
1-124-779-00
1-117-863-11
1-124-779-00
ELECT CHIP
ELECT CHIP
ELECT CHIP
CERAMIC CHIP
ELECT CHIP
22uF
10uF
10uF
0.47uF
10uF
20%
20%
20%
10%
20%
6.3V
16V
16V
6.3V
16V
C5409
C5410
C5411
C5413
C5414
1-127-760-11
1-124-779-00
1-124-779-00
1-164-943-11
1-164-943-11
CERAMIC CHIP
ELECT CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
4.7uF
10uF
10uF
0.01uF
0.01uF
10%
20%
20%
10%
10%
6.3V
16V
16V
16V
16V
C5416
C5418
C5419
C5420
C5421
1-100-252-11
1-125-777-11
1-124-779-00
1-117-863-11
1-117-863-11
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
10uF
0.47uF
0.47uF
10%
10%
20%
10%
10%
6.3V
10V
16V
6.3V
6.3V
C5422
C5423
C5424
C5427
C5430
1-115-467-11
1-115-467-11
1-124-778-00
1-127-760-11
1-127-760-11
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
0.22uF
0.22uF
22uF
4.7uF
4.7uF
10%
10%
20%
10%
10%
10V
10V
6.3V
6.3V
6.3V
C5431
C5433
C5435
C5436
C5437
1-115-467-11
1-115-467-11
1-117-863-11
1-117-863-11
1-164-943-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.22uF
0.22uF
0.47uF
0.47uF
0.01uF
10%
10%
10%
10%
10%
10V
10V
6.3V
6.3V
16V
C5438
C5439
C5440
C5441
C5442
1-164-943-11
1-164-937-11
1-125-777-11
1-164-937-11
1-117-863-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
0.001uF
0.1uF
0.001uF
0.47uF
10%
10%
10%
10%
10%
16V
50V
10V
50V
6.3V
C5443
C5445
C5446
C6501
C6502
1-117-863-11
1-135-158-21
1-125-837-91
1-125-837-91
1-164-943-11
CERAMIC CHIP
TANTAL. CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.47uF
15uF
1uF
1uF
0.01uF
10%
20%
10%
10%
10%
6.3V
4V
6.3V
6.3V
16V
C6503
C6504
C6506
C6507
C6509
1-164-943-11
1-124-779-00
1-125-837-91
1-125-777-11
1-126-209-11
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
0.01uF
10uF
1uF
0.1uF
100uF
10%
20%
10%
10%
20%
16V
16V
6.3V
10V
4V
C6510
1-124-778-00 ELECT CHIP
22uF
20%
6.3V
Note: Resistors are mounted to the location
where C4518, C4519 are printed.
C6511
C6512
Part No.
Description
1-124-778-00 ELECT CHIP
1-126-209-11 ELECT CHIP
22uF
100uF
20%
20%
6.3V
4V
< CONNECTOR >
CN1001
CN1003
CN1007
CN1008
CN1009
1-818-076-11
1-794-998-31
1-779-335-21
1-794-057-21
1-766-677-21
CONNECTOR, FFC/FPC (ZIF) 36P
PIN, CONNECTOR 20P
CONNECTOR, FFC/FPC 22P
PIN, CONNECTOR (PC BOARD) 2P
CONNECTOR, FFC/FPC 16P
CN1011
CN1013
CN1501
CN1551
* CN2401
1-766-677-21
1-779-328-21
1-779-331-11
1-750-360-21
1-580-055-21
CONNECTOR, FFC/FPC 16P
CONNECTOR, FFC/FPC 8P
FFC/CONNECTOR, FPC (LIF (NON-ZIF)) 14P
FFC/CONNECTOR, FPC (ZIF) 24P
PIN, CONNECTOR (SMD) 2P
CN2402
CN2403
CN2404
CN3201
CN4001
1-766-340-21
1-816-179-11
1-766-345-21
1-766-341-21
1-573-806-21
CONNECTOR, FFC/FPC 10P
CONNECTOR, FFC/FPC (ZIF) 22P
FFC/CONNECTOR, FPC (LIF (NON-ZIF)) 15P
CONNECTOR, FFC/FPC 11P
PIN, CONNECTOR (1.5MM)(SMD) 6P
< DIODE >
D1006
D1007
D1009
D1010
D1011
6-500-044-01
6-500-044-01
6-500-314-01
8-719-069-57
6-500-776-01
DIODE
DIODE
DIODE
DIODE
DIODE
DF6A6.8FU (TE85R)
DF6A6.8FU (TE85R)
DAN222MT2L
UDZSTE-176.8B
MAZW068H0LS0
D1012
D1301
D1302
D1303
D1305
6-500-776-01
8-719-027-76
6-500-314-01
8-719-074-08
8-719-074-08
DIODE
DIODE
DIODE
DIODE
DIODE
MAZW068H0LS0
1SS357-TPH3
DAN222MT2L
MA4ZD03001S0
MA4ZD03001S0
D1306
D1501
D1551
D4001
D4002
8-719-074-08
8-719-082-63
8-719-073-01
8-719-074-08
6-500-776-01
DIODE
DIODE
DIODE
DIODE
DIODE
MA4ZD03001S0
1SV329 (TPL3)
MA111-(K8).S0
MA4ZD03001S0
MAZW068H0LS0
D5001
8-719-073-01 DIODE MA111-(K8).S0
< FUSE >
0 F001
0 F002
0 F003
0 F004
1-576-406-21
1-576-406-21
1-576-406-21
1-576-406-21
FUSE (1.4A/32V)
FUSE (1.4A/32V)
FUSE (1.4A/32V)
FUSE (1.4A/32V)
< FERRITE BEAD >
FB1501
FB1504
FB1601
FB2401
FB2402
1-414-760-21
1-414-760-21
1-414-760-21
1-414-760-21
1-500-283-11
FERRITE, EMI (SMD) (1608)
FERRITE, EMI (SMD) (1608)
FERRITE, EMI (SMD) (1608)
FERRITE, EMI (SMD) (1608)
INDUCTOR, FERRITE BEAD
FB2403
FB3301
FB3302
FB3303
FB4501
1-500-283-11
1-414-760-21
1-414-760-21
1-414-760-21
1-414-760-21
INDUCTOR, FERRITE BEAD
FERRITE, EMI (SMD) (1608)
FERRITE, EMI (SMD) (1608)
FERRITE, EMI (SMD) (1608)
FERRITE, EMI (SMD) (1608)
< IC >
IC1001
5-18
6-702-302-01 IC TK11133CSCL-G
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
DCR-TRV255E/TRV260/TRV265/TRV265E
VC-344
Ref. No.
Part No.
Description
IC1301
IC1302
IC1501
IC1502
6-705-264-01
6-703-228-01
8-752-417-70
6-703-146-01
IC
IC
IC
IC
MB44A120BPFV-G-BND-ERE1
TK11160CSCL-G
CXD2444AR-T4
HD49337AFEB
Ref. No.
IC1552
IC1553
IC1554
IC1601
IC2401
8-759-681-42
8-759-637-96
8-759-693-13
6-701-985-01
6-705-676-01
IC
IC
IC
IC
IC
NJM12902V (TE2)
uPD16877MA-6A5-E2
NJM12904V (TE2)
BH2220FVM-TR
TB6550FG (O, EB)
IC3201
IC3301
IC3302
IC4501
IC4502
8-752-106-95
8-752-418-16
8-759-566-52
6-803-882-01
6-705-122-01
IC
IC
IC
IC
IC
CXA3619R-T4
CXD3164R
SN104266PN-TEB
MB91194APFF-G-155-BNDE1 (Note)
BR25C320FV-WE2
IC5001
IC5401
IC5402
IC6501
6-803-798-01
6-701-074-01
8-759-647-71
6-705-159-01
IC
IC
IC
IC
MB89097PFV-G-170-BND-ERE1
LA74207W-TBM-E
AK4550VT-E2
NJM2570AV (TE2)
< COIL >
L1301
L1302
L1303
L1304
L1305
1-416-670-11
1-419-354-21
1-419-354-21
1-416-670-11
1-419-354-21
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
33uH
22uH
22uH
33uH
22uH
L1306
L1307
L1308
L1309
L1310
1-419-354-21
1-419-354-21
1-469-523-91
1-469-524-91
1-412-056-11
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
22uH
22uH
2.2uH
4.7uH
4.7uH
L1311
L1312
L1313
L1314
L1315
1-469-525-91
1-469-524-91
1-469-524-91
1-469-524-91
1-469-526-91
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
10uH
4.7uH
4.7uH
4.7uH
22uH
L1316
L1317
L1318
L1319
L1320
1-469-527-91
1-469-524-91
1-469-524-91
1-469-524-91
1-469-524-91
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
47uH
4.7uH
4.7uH
4.7uH
4.7uH
L1501
L1551
L1553
L3201
L3202
1-400-588-11
1-414-398-11
1-400-588-11
1-400-588-11
1-400-588-11
INDUCTOR, LAMINATE CHIP
INDUCTOR
10uH
INDUCTOR, LAMINATE CHIP
INDUCTOR, LAMINATE CHIP
INDUCTOR, LAMINATE CHIP
L3203
L3204
L3305
L3307
L3310
1-414-406-41
1-400-197-11
1-400-588-11
1-400-588-11
1-400-588-11
INDUCTOR
220uH
INDUCTOR
12uH
INDUCTOR, LAMINATE CHIP 10uH
INDUCTOR, LAMINATE CHIP 10uH
INDUCTOR, LAMINATE CHIP 10uH
L3313
L3320
L3321
L6501
1-400-588-11
1-400-588-11
1-400-588-11
1-400-588-11
INDUCTOR, LAMINATE CHIP
INDUCTOR, LAMINATE CHIP
INDUCTOR, LAMINATE CHIP
INDUCTOR, LAMINATE CHIP
10uH
8-729-402-84 TRANSISTOR
6-550-242-01 TRANSISTOR
2SA2029T2LQ/R
2SC5658T2LQ/R
UP04501008S0
Q1304
Q1305
Q1306
Q1307
Q1308
6-550-237-01
6-550-405-01
6-550-405-01
6-550-405-01
6-550-405-01
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SC5658T2LQ/R
CPH5815-TL-E
CPH5815-TL-E
CPH5815-TL-E
CPH5815-TL-E
Q1309
Q1310
Q1311
Q1312
Q1313
6-550-405-01
6-550-405-01
6-550-560-01
6-550-232-01
8-729-054-50
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
CPH5815-TL-E
CPH5815-TL-E
CPH5819-TL-E
2SA2029T2LQ/R
UP04501008S0
Q1314
Q1315
Q1316
Q1317
Q1318
8-729-054-49
8-729-216-22
8-729-055-22
8-729-054-50
6-550-232-01
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
UP04401008S0
2SA1162-G
2SA1734 (TE12L)
UP04501008S0
2SA2029T2LQ/R
Q1320
Q1324
Q1325
Q1551
Q1554
8-729-054-50
6-550-237-01
8-729-054-49
6-550-758-01
6-550-237-01
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
UP04501008S0
2SC5658T2LQ/R
UP04401008S0
DTC113TMT2L
2SC5658T2LQ/R
Q1555
Q2401
Q3202
Q3203
Q3204
8-729-054-51
6-550-283-01
8-729-054-48
6-550-234-01
6-550-232-01
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
UP04116008S0
UNR32A600LS0
UP04601008S0
UNR32A300LS0
2SA2029T2LQ/R
Q3205
Q3303
Q3307
Q3308
Q4001
8-729-047-19
6-550-383-01
6-550-239-01
8-729-054-49
6-550-237-01
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SA1965-S-TL
HN4A71FK (TE85R)
DTA144EMT2L
UP04401008S0
2SC5658T2LQ/R
Q4002
Q4003
Q4004
Q4501
Q4502
8-729-056-54
8-729-055-22
6-550-234-01
6-550-234-01
6-550-237-01
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TPCS8302 (TE12L)
2SA1734 (TE12L)
UNR32A300LS0
UNR32A300LS0
2SC5658T2LQ/R
Q5001
Q5401
Q5403
Q5408
8-729-041-43
8-729-054-52
6-550-240-01
8-729-921-51
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
HN1L02FU (TE85R)
UP04216008S0
DTA114TMT2L
2SD1834-T100
< RESISTOR >
10uH
10uH
10uH
10uH
XN4601
DTC114EMT2L
Note: Changing the data is needs when IC4501 is replaced.
Please refer to change of IC4501 in page 1-6.
Description
6-550-232-01 TRANSISTOR
6-550-237-01 TRANSISTOR
8-729-054-50 TRANSISTOR
10uH
10uH
10uH
< TRANSISTOR >
Q1001
Q1002
Part No.
Q1301
Q1302
Q1303
5-19
R1001
R1003
R1005
R1006
R1007
1-218-949-11
1-218-954-11
1-218-957-11
1-211-977-11
1-208-683-11
RES-CHIP
RES-CHIP
RES-CHIP
METAL CHIP
METAL CHIP
470
1.2K
2.2K
22
1K
5%
5%
5%
0.5%
0.5%
1/16W
1/16W
1/16W
1/10W
1/16W
R1008
R1009
R1014
R1025
R1029
1-208-707-11
1-218-953-11
1-218-940-11
1-218-990-11
1-218-943-11
METAL CHIP
RES-CHIP
RES-CHIP
SHORT CHIP
RES-CHIP
10K
1K
82
0
150
0.5%
5%
5%
1/16W
1/16W
1/16W
5%
1/16W
R1031
R1032
R1034
R1301
1-218-990-11
1-218-943-11
1-218-953-11
1-218-961-11
SHORT CHIP
RES-CHIP
RES-CHIP
RES-CHIP
0
150
1K
4.7K
5%
5%
5%
1/16W
1/16W
1/16W
DCR-TRV255E/TRV260/TRV265/TRV265E
VC-344
Ref. No.
Part No.
Description
Ref. No.
R1302
1-218-953-11 RES-CHIP
1K
5%
1/16W
R1303
R1304
R1305
R1306
R1307
1-220-200-81
1-218-973-11
1-218-977-11
1-218-961-11
1-218-970-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
30K
47K
100K
4.7K
27K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R1308
R1309
R1310
R1311
R1312
1-218-971-11
1-218-963-11
1-218-977-11
1-218-969-11
1-218-977-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
33K
6.8K
100K
22K
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R1313
R1314
R1315
R1316
R1317
1-218-949-11
1-218-953-11
1-218-953-11
1-208-709-11
1-218-967-11
RES-CHIP
RES-CHIP
RES-CHIP
METAL CHIP
RES-CHIP
470
1K
1K
12K
15K
5%
5%
5%
0.5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R1318
R1319
R1323
R1324
R1326
1-218-978-11
1-208-715-11
1-218-969-11
1-218-969-11
1-218-969-11
RES-CHIP
METAL CHIP
RES-CHIP
RES-CHIP
RES-CHIP
120K
22K
22K
22K
22K
5%
0.5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R1327
R1328
R1329
R1330
R1331
1-208-935-11
1-208-707-11
1-208-943-11
1-208-935-11
1-208-721-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
10K
220K
100K
39K
0.5%
0.5%
0.5%
0.5%
0.5%
1/16W
1/16W
1/16W
1/16W
1/16W
R1332
R1333
R1334
R1335
R1336
1-208-908-11
1-208-935-11
1-208-927-11
1-218-964-11
1-218-977-11
METAL CHIP
METAL CHIP
METAL CHIP
RES-CHIP
RES-CHIP
7.5K
100K
47K
8.2K
100K
0.5%
0.5%
0.5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R1337
R1338
R1339
R1340
R1343
1-218-949-11
1-208-909-11
1-218-973-11
1-208-711-11
1-218-977-11
RES-CHIP
METAL CHIP
RES-CHIP
METAL CHIP
RES-CHIP
470
8.2K
47K
15K
100K
5%
0.5%
5%
0.5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R1344
R1347
R1348
R1349
R1350
1-218-961-11
1-218-977-11
1-208-715-11
1-218-963-11
1-208-707-11
RES-CHIP
RES-CHIP
METAL CHIP
RES-CHIP
METAL CHIP
4.7K
100K
22K
6.8K
10K
5%
5%
0.5%
5%
0.5%
1/16W
1/16W
1/16W
1/16W
1/16W
R1357
R1358
R1359
R1503
R1509
1-218-990-11
1-208-943-11
1-208-931-11
1-218-977-11
1-218-989-11
SHORT CHIP
METAL CHIP
METAL CHIP
RES-CHIP
RES-CHIP
0
220K
68K
100K
1M
0.5%
0.5%
5%
5%
1/16W
1/16W
1/16W
1/16W
R1512
R1521
R1523
R1532
R1533
1-218-985-11
1-218-937-11
1-218-990-11
1-218-990-11
1-218-971-11
RES-CHIP
RES-CHIP
SHORT CHIP
SHORT CHIP
RES-CHIP
470K
47
0
0
33K
5%
5%
1/16W
1/16W
5%
1/16W
R1560
R1561
R1562
R1563
R1564
1-208-635-11
1-218-989-11
1-218-957-11
1-218-965-11
1-218-981-11
METAL CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
10
1M
2.2K
10K
220K
0.5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R1565
1-218-985-11 RES-CHIP
470K
5%
1/16W
5-20
Part No.
Description
R1566
R1567
R1568
R1570
1-218-985-11
1-218-957-11
1-218-963-11
1-218-985-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
470K
2.2K
6.8K
470K
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
R1573
R1575
R1576
R1577
R1581
1-218-947-11
1-218-953-11
1-218-965-11
1-218-973-11
1-208-715-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
METAL CHIP
330
1K
10K
47K
22K
5%
5%
5%
5%
0.5%
1/16W
1/16W
1/16W
1/16W
1/16W
R1582
R1583
R1584
R2401
R2402
1-208-707-11
1-218-983-11
1-218-985-11
1-218-973-11
1-218-983-11
METAL CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
10K
330K
470K
47K
330K
0.5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R2403
R2404
R2418
R2419
R2421
1-218-949-11
1-218-946-11
1-218-965-11
1-216-789-11
1-216-789-11
RES-CHIP
RES-CHIP
RES-CHIP
METAL CHIP
METAL CHIP
470
270
10K
2.2
2.2
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/10W
1/10W
R2422
R2423
R2424
R2428
R2434
1-216-789-11
1-218-971-11
1-218-990-11
1-218-965-11
1-216-808-11
METAL CHIP
RES-CHIP
SHORT CHIP
RES-CHIP
METAL CHIP
2.2
33K
0
10K
82
5%
5%
1/10W
1/16W
5%
5%
1/16W
1/10W
R2442
R3210
R3212
R3214
R3216
1-218-953-11
1-208-715-11
1-208-709-11
1-220-196-11
1-208-701-11
RES-CHIP
METAL CHIP
METAL CHIP
RES-CHIP
METAL CHIP
1K
22K
12K
13K
5.6K
5%
0.5%
0.5%
5%
0.5%
1/16W
1/16W
1/16W
1/16W
1/16W
R3218
R3219
R3220
R3221
R3222
1-208-715-11
1-208-715-11
1-218-971-11
1-218-945-11
1-218-945-11
METAL CHIP
METAL CHIP
RES-CHIP
RES-CHIP
RES-CHIP
22K
22K
33K
220
220
0.5%
0.5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R3223
R3224
R3225
R3226
R3229
1-218-945-11
1-218-945-11
1-218-946-11
1-218-945-11
1-218-941-81
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
220
220
270
220
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R3230
R3231
R3232
R3233
R3234
1-218-938-11
1-218-950-11
1-218-965-11
1-218-965-11
1-218-966-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
56
560
10K
10K
12K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R3235
R3313
R3314
R3315
R3316
1-218-969-11
1-208-707-11
1-208-707-11
1-218-965-11
1-218-961-11
RES-CHIP
METAL CHIP
METAL CHIP
RES-CHIP
RES-CHIP
22K
10K
10K
10K
4.7K
5%
0.5%
0.5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R3326
R3330
R3332
R3335
R3343
1-208-677-11
1-208-677-11
1-208-675-11
1-208-677-11
1-218-951-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
RES-CHIP
560
560
470
560
680
0.5%
0.5%
0.5%
0.5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R3350
R3353
R3356
R3361
1-218-946-11
1-208-709-11
1-208-709-11
1-218-864-11
RES-CHIP
METAL CHIP
METAL CHIP
METAL CHIP
270
12K
12K
5.1K
5%
0.5%
0.5%
0.5%
1/16W
1/16W
1/16W
1/10W
DCR-TRV255E/TRV260/TRV265/TRV265E
VC-344
Ref. No.
Part No.
Description
Ref. No.
R3365
1-218-955-11 RES-CHIP
1.5K
5%
1/16W
R3397
R4001
R4003
R4004
R4006
1-218-953-11
1-218-953-11
1-216-864-11
1-216-864-11
1-218-977-11
RES-CHIP
RES-CHIP
SHORT CHIP
SHORT CHIP
RES-CHIP
1K
1K
0
0
100K
5%
5%
1/16W
1/16W
5%
1/16W
R4007
R4008
R4009
R4010
R4501
1-218-989-11
1-216-797-11
1-218-954-11
1-218-963-11
1-218-941-81
RES-CHIP
METAL CHIP
RES-CHIP
RES-CHIP
RES-CHIP
1M
10
1.2K
6.8K
100
5%
5%
5%
5%
5%
1/16W
1/10W
1/16W
1/16W
1/16W
R4502
R4507
R4510
R4512
R4514
1-218-965-11
1-218-977-11
1-218-973-11
1-218-985-11
1-218-953-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
10K
100K
47K
470K
1K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R4519
R4524
R4535
R4536
R4537
1-218-977-11
1-218-953-11
1-218-990-11
1-218-973-11
1-218-977-11
RES-CHIP
RES-CHIP
SHORT CHIP
RES-CHIP
RES-CHIP
100K
1K
0
47K
100K
5%
5%
1/16W
1/16W
5%
5%
1/16W
1/16W
R5015
R5016
R5017
R5018
R5019
1-218-973-11
1-208-935-11
1-218-989-11
1-218-961-11
1-219-570-11
RES-CHIP
METAL CHIP
RES-CHIP
RES-CHIP
METAL CHIP
47K
100K
1M
4.7K
10M
5%
0.5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/10W
R5020
R5021
R5022
R5023
R5024
1-218-985-11
1-208-927-11
1-218-990-11
1-218-953-11
1-218-965-11
RES-CHIP
METAL CHIP
SHORT CHIP
RES-CHIP
RES-CHIP
470K
47K
0
1K
10K
5%
0.5%
1/16W
1/16W
5%
5%
1/16W
1/16W
R5027
R5034
R5051
R5403
R5407
1-218-989-11
1-218-949-11
1-218-977-11
1-218-961-11
1-218-973-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
1M
470
100K
4.7K
47K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R5416
R5417
R5418
R5421
R5422
1-218-957-11
1-218-973-11
1-218-977-11
1-216-821-11
1-216-821-11
RES-CHIP
RES-CHIP
RES-CHIP
METAL CHIP
METAL CHIP
2.2K
47K
100K
1K
1K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/10W
1/10W
R5429
R5430
R5431
R5432
R5441
1-218-955-11
1-218-955-11
1-218-951-11
1-218-951-11
1-216-829-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
METAL CHIP
1.5K
1.5K
680
680
4.7K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/10W
R5442
R6507
R6509
1-216-829-11 METAL CHIP
1-208-715-11 METAL CHIP
1-218-965-11 RES-CHIP
4.7K
22K
10K
5%
0.5%
5%
1/10W
1/16W
1/16W
1-234-379-21
1-234-375-21
1-234-380-21
1-234-378-21
1-234-379-21
Description
1-234-714-11
1-234-377-21
1-234-376-21
1-234-714-11
RES, NETWORK 56 x 4 (1005)
RES, NETWORK 4.7K x 4 (1005)
RES, NETWORK 2.2K x 4 (1005)
RES, NETWORK 56 x 4 (1005)
RB4501
RB4508
RB4509
RB4510
RB4511
1-234-381-21
1-234-378-21
1-234-381-21
1-234-381-21
1-234-375-21
RES, NETWORK 100K x 4 (1005)
RES, NETWORK 10K x 4 (1005)
RES, NETWORK 100K x 4 (1005)
RES, NETWORK 100K x 4 (1005)
RES, NETWORK 1K x 4 (1005)
RB4512
RB4514
RB4515
RB5001
RB5002
1-234-384-11
1-234-381-21
1-234-375-21
1-234-375-21
1-234-375-21
RES, NETWORK 1M x 4 (1005)
RES, NETWORK 100K x 4 (1005)
RES, NETWORK 1K x 4 (1005)
RES, NETWORK 1K x 4 (1005)
RES, NETWORK 1K x 4 (1005)
RB5006
RB5007
RB5008
RB5009
RB5011
1-234-375-21
1-234-375-21
1-234-375-21
1-234-383-21
1-234-381-21
RES, NETWORK 1K x 4 (1005)
RES, NETWORK 1K x 4 (1005)
RES, NETWORK 1K x 4 (1005)
RES, NETWORK 470K x 4 (1005)
RES, NETWORK 100K x 4 (1005)
RB5401 1-234-381-21 RES, NETWORK 100K x 4 (1005)
RB5402 1-234-375-21 RES, NETWORK 1K x 4 (1005)
RB6501 1-234-702-11 RES, NETWORK 68 x 4 (1005)
< VIBRATOR >
X1501
X4501
X5001
X5002
< COMPOSITION CIRCUIT BLOCK >
RB1551
RB1552
RB1553
RB2401
RB3201
Part No.
RB3303
RB3304
RB3305
RB3307
RES, NETWORK 22K x 4 (1005)
RES, NETWORK 1K x 4 (1005)
RES, NETWORK 47K x 4 (1005)
RES, NETWORK 10K x 4 (1005)
RES, NETWORK 22K x 4 (1005)
RB3202 1-234-376-21 RES, NETWORK 2.2K x 4 (1005)
5-21
1-767-586-11
1-760-655-41
1-795-244-11
1-760-458-21
VIBRATOR, CRYSTAL (27MHz)
VIBRATOR, CRYSTAL (20MHz)
VIBRATOR, CERAMIC (10MHz)
VIBRATOR, CRYSTAL (32.768kHz)
DCR-TRV255E/TRV260/TRV265/TRV265E
Checking supplied accessories.
USB cable (1)
1-823-931-21
Conversion 2P adaptor (1)
0 1-569-008-12 (E)
Battery Holder
3-087-983-01
Wireless Remote Commander
RMT-830 (1)
1-477-898-71
(TRV265/TRV265E:
EXCEPT E2)
1-477-898-91
(TRV265E: E1)
21-pin adaptor (1)
1-770-783-21
(AEP, UK, NE, EE)
(Note)E1: No indication of country of origin.
E2: There is indication of country of origin.
Conversion 2P adaptor (1)
0 1-569-007-12 (JE)
AC-L15A/L15B AC Adaptor (1)
0 1-477-533-32
(Middle East area)
0 1-477-533-51
(EXCEPT Middle East area)
Rechargeable battery pack
NP-FM30 (1)
0 A-7096-387-A (US, CND)
0 A-7096-388-B
(EXCEPT US, CND)
Shoulder strap (1)
3-987-015-01
Power cord (1)
0 1-696-819-21 (AUS)
0 1-769-608-11 (AEP, NE, EE, E)
0 1-783-374-11 (UK)
0 1-790-542-12 (US, CND)
0 1-827-160-11 (JE)
Lens cap (1)
X-3952-971-1
CD-ROM
(SPVD-012 (V) USB Driver) (1)
3-086-790-01 (US, CND)
(SPVD-012 USB Driver) (1)
3-087-821-01
(EXCEPT US, CND)
Cap string (1)
3-979-194-12
A/V connecting cable (1)
1-824-097-41
Other accessories
CAMERA OPERATIONS GUIDE
3-087-918-11 MANUAL, INSTRUCTION (ENGLISH) (TRV260/TRV265)
3-087-918-21 MANUAL, INSTRUCTION (FRENCH) (TRV260: CND)
3-087-918-31 MANUAL, INSTRUCTION (SPANISH, PORTUGUESE)
(TRV260: E/TRV265)
3-087-918-41 MANUAL, INSTRUCTION (TRADITIONAL CHINESE)
(TRV265: E)
3-087-918-51 MANUAL, INSTRUCTION (KOREA) (TRV265: JE)
3-087-918-61 MANUAL, INSTRUCTION (ARABIC) (TRV265: E)
3-087-919-11 MANUAL, INSTRUCTION (ENGLISH)
(TRV255E: AEP, UK/TRV265E: AEP, UK, E, JE, AUS)
3-087-919-21 MANUAL, INSTRUCTION (FRENCH)
(TRV255E: AEP/TRV265E: AEP, E, JE)
3-087-919-31 MANUAL, INSTRUCTION (SPANISH, PORTUGUESE)
(TRV255E: AEP/TRV265E: AEP)
3-087-919-41 MANUAL, INSTRUCTION (ITALIAN, GREEK)
(TRV255E: AEP/TRV265E: AEP)
3-087-919-51 MANUAL, INSTRUCTION (GERMAN, DUTCH)
(TRV255E: AEP/TRV265E: AEP)
3-087-919-61 MANUAL, INSTRUCTION (SWEDISH, RUSSIAN)
(TRV255E: NE/TRV265E: NE, JE)
3-087-919-71 MANUAL, INSTRUCTION (DANISH, FINNISH)
(TRV255E: NE/TRV265E: NE)
3-087-919-81 MANUAL, INSTRUCTION (POLISH, CZECH)
(TRV255E: EE/TRV265E: EE)
3-087-919-91 MANUAL, INSTRUCTION (HUNGALIAN, SLOVAKIAN)
(TRV255E: EE/TRV265E: EE)
3-087-920-11 MANUAL, INSTRUCTION (ARABIC, PERSIAN) (TRV265E: E)
3-087-920-31 MANUAL, INSTRUCTION (SIMPLIFIED CHINESE)
(TRV265E: E, JE)
COMPUTER APPLICATIONS GUIDE
3-087-936-11 MANUAL, (PC) INSTRUCTION (ENGLISH)
(TRV255E: UK/TRV260/TRV265/TRV265E: UK, E, AUS, JE)
3-087-936-21 MANUAL, (PC) INSTRUCTION (FRENCH)
(TRV255E: AEP/TRV260: CND/TRV265E: AEP, E, JE)
3-087-936-31 MANUAL, (PC) INSTRUCTION (GERMAN, DUTCH)
(TRV255E: AEP/TRV265E: AEP)
3-087-936-41 MANUAL, (PC) INSTRUCTION (SPANISH, PORTUGUESE)
(TRV255E/TRV260: E/TRV265/TRV265E: AEP)
3-087-936-51 MANUAL, (PC) INSTRUCTION (ITALIAN, GREEK)
(TRV255E: AEP/TRV265E: AEP)
3-087-936-61 MANUAL, (PC) INSTRUCTION (SWEDISH, RUSSIAN)
(TRV255E: NE/TRV265E: NE, JE)
3-087-936-71 MANUAL, (PC) INSTRUCTION (DANISH, FINNISH)
(TRV255E: NE/TRV265E: NE)
3-087-936-81 MANUAL, (PC) INSTRUCTION (POLISH, CZECH)
(TRV255E: EE/TRV265E: EE)
3-087-936-91 MANUAL, (PC) INSTRUCTION (HUNGARIAN, SLOVAKIAN)
(TRV255E: EE/TRV265E: EE)
3-087-937-11 MANUAL, (PC) INSTRUCTION (ARABIC, PERSIAN)
(TRV265: E/TRV265E: E)
3-087-937-21 MANUAL, (PC) INSTRUCTION (TRADITIONAL CHINESE)
(TRV265: E)
3-087-937-31 MANUAL, (PC) INSTRUCTION (SIMPLIFIED CHINESE)
(TRV265E: E, JE)
3-087-937-41 MANUAL, (PC) INSTRUCTION (KOREA) (TRV265: JE)
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part number specified.
5-22E
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
DCR-TRV255E/TRV260/TRV265/TRV265E
9-876-292-11
Sony EMCS Co.
— 112 —
2003K0500-1
©2003.11
Published by DI CS Strategy Div
[Description of main button functions on toolbar of the Adobe Acrobat Reader Ver5.0 (for Windows)]
Toolbar
Printing a text
Reversing the screens displayed once
1. Click the Print button
.
2. Specify a printer, print range, number of copies, and other options, and then click [OK].
• To reverse the previous screens (operation) one by one, click
.
the
• To advance the reversed screens (operation) one by one, click
the
.
Application of printing:
To set a range to be printed within a page, select the graphic
and drag on the page to enclose a range to
selection tool
be printed, and then click the Print button.
Application to the Service Manual:
This function allows you to go and back between circuit diagram and printed circuit board diagram, and accordingly it
will be convenient for the voltage check.
Finding a text
1. Click the Find button
.
2. Enter a character string to be found into a text box, and click
the [Find]. (Specify the find options as necessary)
Application to the Service Manual:
To execute “find” from current page toward the previous pages,
select the check box “Find Backward” and then click the
“Find”.
Moving with link
1. Select either palm tool
, zoom tool
, text selection tool
, or graphic selection tool
.
2. Place the pointer in the position in a text where the link exists
(such as a button on cover and the table of contents page, or
blue characters on the removal flowchart page or drawing
page), and the pointer will change to the forefinger form
.
3. Then, click the link. (You will go to the link destination.)
Moving with bookmark:
Click an item (text) on the bookmark pallet, and you can move
to the link destination. Also, clicking
can display the
hidden items.
(To go back to original state, click
)
3. Open the find dialog box again, and click the [Find Again] and
you can find the matched character strings displayed next.
(Character strings entered previously are displayed as they are
in the text box.)
Application to the Service Manual:
The parts on the drawing pages (block diagrams, circuit diagrams, printed circuit boards) and parts list pages in a text
can be found using this find function. For example, find a
Ref. No. of IC on the block diagram, and click the [Find Again]
continuously, so that you can move to the Ref. No. of IC on
the circuit diagram or printed circuit board diagram successively.
Note: The find function may not be applied to the Service
Manual depending on the date of issue.
Zooming or rotating the screen display
“Zoom in/out”
• Click the triangle button in the zoom control box to select the
display magnification. Or, you may click
ing in or out.
or
for zoom-
Switching a page
• To move to the first page, click the
.
• To move to the last page, click the
.
• To move to the previous page, click the
• To move to the next page, click the
.
.
“Rotate”
• Click rotate tool
, and the page then rotates 90 degrees each.
Application to the Service Manual:
The printed circuit board diagram you see now can be changed
to the same direction as the set.
Reverse
987629211.pdf
Revision History
Ver.
Date
1.0
2003.11
History
Official Release
Contents
—
S.M. Rev.
issued
—
DCR-TRV255E/TRV260/TRV265/TRV265E
RMT-830
Ver 1.0 2003. 11
Revision History
ADJ
SECTION 6
ADJUSTMENTS
Link
VIDEO SECTION ADJUSTMENTS
Before Starting Adjustments
Adjusting Items when Replacing Main Parts and Boards
PREPARATIONS BEFORE ADJUSTMENTS
SYSTEM CONTROL SYSTEM ADJUSTMENTS
CAMERA SECTION ADJUSTMENTS
SERVO AND RF SYSTEM ADJUSTMENTS
PREPARATIONS BEFORE ADJUSTMENTS
VIDEO SYSTEM ADJUSTMENTS
INITIALIZATION OF 8, A, C, D, E, F, 1C, 1F PAGE DATA
AUDIO SYSTEM ADJUSTMENTS
CAMERA SYSTEM ADJUSTMENTS
SERVICE MODE
LCD SYSTEM ADJUSTMENTS
MECHANISM SECTION ADJUSTMENTS
ADJUSTMENT REMOTE COMMANDER
DATA PROCESS
ADJUSTMENT REMOTE COMMANDER
SERVICE MODE
HOW TO ENTER RECORD MODE WITHOUT CASSETTE
HOW TO ENTER PLAYBACK MODE WITHOUT CASSETTE
TAPE PATH ADJUSTMENT
CHECKS AFTER ADJUSTMENTS
9-876-292-51
Sony EMCS Co.
2003K0500-1
©2003.11
Published by DI CS Strategy Div
DCR-TRV255E/TRV260/TRV265/TRV265E
TABLE OF CONTENTS
Section
6.
Title
Page
ADJUSTMENTS
1.
Before Starting Adjustments ··········································· 6-1
1-1. Adjusting Items when Replacing
Main Parts and Boards ···················································· 6-2
6-1. Camera Section Adjustments ··········································· 6-4
1-1. Preparations before Adjustments (Camera Section) ········ 6-4
1-1-1. List of Service Tools ························································ 6-4
1-1-2. Preparations ····································································· 6-5
1-1-3. Precaution ········································································ 6-6
1.
Setting the Switch ···························································· 6-6
2.
Order of Adjustments ······················································ 6-6
3.
Subjects ··········································································· 6-6
1-2. Initialization of 8, A, C, D, E, F, 1C, 1F Page Data ········ 6-7
1-2-1. Version Check ·································································· 6-7
1.
Discrimination Method by the Model Name of IC4501
(Mechanism Control) ······················································ 6-7
2.
Discrimination Method by Adjusting Remote
Commander ····································································· 6-7
1-2-2. Initialization of A, D Page Data ······································ 6-8
1.
Initializing the A, D Page Data ········································ 6-8
2.
Modification of A, D Page Data ······································ 6-8
3.
A Page Table ···································································· 6-9
4.
D Page Table ···································································· 6-9
1-2-3. Initialization of 8, C, 1C Page Data ······························· 6-10
1.
Initializing the 8, C, 1C Page Data ································ 6-10
2.
Modification of 8, C, 1C Page Data ······························ 6-10
3.
8 Page Table ··································································· 6-10
4.
C Page Table ·································································· 6-11
5.
1C Page Table ································································ 6-12
1-2-4. Initialization of E, F, 1F Page Data ······························· 6-13
1.
Initializing the E, F, 1F Page Data ································· 6-13
2.
Modification of E, F, 1F Page Data ······························· 6-13
3.
E Page Table ·································································· 6-13
4.
F Page Table ·································································· 6-14
5.
1F Page Table ································································ 6-14
1-3. Camera System Adjustments ········································· 6-15
1.
HALL Adjustment ························································· 6-15
2.
Flange Back Adjustment
(Using the Minipattern Box) ········································· 6-16
3.
Flange Back Adjustment
(Using the Flange Back Adjustment Chart
and Subject More than 500 m Away) ···························· 6-17
3-1. Flange Back Adjustment (1) ·········································· 6-17
3-2. Flange Back Adjustment (2) ·········································· 6-17
4.
Flange Back Check ························································ 6-18
5.
Optical Axis Adjustment ··············································· 6-19
6.
Picture Frame Setting ···················································· 6-20
7.
Color Reproduction Adjustment ···································· 6-21
8.
LV Standard Data Input ················································· 6-22
9.
Auto White Balance Standard Data Input ····················· 6-22
10
Auto White Balance Adjustment ··································· 6-23
11. Auto White Balance Check ··········································· 6-24
12. Steadyshot Check ·························································· 6-25
13. CCD Defect Check ························································ 6-25
1-4. LCD System Adjustments ············································· 6-26
1.
LCD Level Adjustment (PD-204 Board) ······················· 6-26
2.
LCD V-COM Adjustment (PD-204 Board) ··················· 6-27
3.
LCD White Balance Adjustment (PD-204 Board) ········ 6-27
6-2. Mechanism Section Adjustments ·································· 6-28
2-1. Adjustment Remote Commander ·································· 6-28
2-2. How to Enter Record Mode without Cassette ··············· 6-28
2-3. How to Enter Playback Mode without Cassette ············ 6-28
2-4. Tape Path Adjustment ···················································· 6-29
2-4-1. Preparations for Adjustment ·········································· 6-29
2-4-2. Tape Path Adjustment ···················································· 6-30
2-4-3. No.7 Guide (TG7) Adjustment ······································ 6-31
Section
Title
Page
2-4-4. CUE, REV Waveforms Check ······································· 6-31
2-5. Checks After Adjustments ············································· 6-31
2-5-1. Waveform Build-up Check ············································ 6-31
2-5-2. Tape Path Check ···························································· 6-31
6-3. Video Section Adjustments ··········································· 6-32
3-1. Preparations before Adjustments ··································· 6-32
3-1-1. Equipment to Required ·················································· 6-32
3-1-2. Precautions on Adjusting ··············································· 6-33
3-1-3. Adjusting Connectors ···················································· 6-33
3-1-4. Connecting the Equipment ············································ 6-33
3-1-5. Alignment Tape ····························································· 6-34
3-1-6. Input/output Level and Impedance ································ 6-35
3-2. System Control System Adjustments ···························· 6-36
1.
Initialization of 8, A, C, D, E, F, 1C, 1F Page Data ······ 6-36
2.
Node Unique ID No. Input ············································ 6-36
2-1. Input of Company ID ···················································· 6-36
2-2. Input of Serial No. ························································· 6-36
3-3. Servo and RF System Adjustments ······························· 6-38
1.
CAP FG/REEL FG Duty Adjustment
(VC-344 Board) ····························································· 6-38
2.
Switching Position Adjustment (VC-344 Board) ·········· 6-38
3.
SD Error Rate Check (LP) (VC-344 Board) ················· 6-39
3-4. Video System Adjustments ············································ 6-40
1.
27 MHz Origin Oscillation Adjustment
(VC-344 Board) ····························································· 6-40
2.
S VIDEO OUT Y Level Adjustment
(VC-344 Board) ····························································· 6-40
3.
S VIDEO OUT C Level Adjustment
(VC-344 Board) ····························································· 6-41
4.
VIDEO OUT Level Check (VC-344 Board) ················· 6-42
3-5. Audio System Adjustments ··········································· 6-43
1.
Playback Level Check ··················································· 6-43
6-4. Service Mode ································································· 6-44
4-1. Adjustment Remote Commander ·································· 6-44
1.
Using the Adjustment Remote Commander ·················· 6-44
2.
Precautions Upon Using
the Adjustment Remote Commander ···························· 6-44
4-2. Data Process ·································································· 6-45
4-3. Service Mode ································································· 6-46
1.
Setting the Test Mode ···················································· 6-46
2.
Emergence Memory Address ········································ 6-46
2-1. C Page Emergence Memory Address ···························· 6-46
2-2. EMG Code (Emergency Code) ····································· 6-47
2-3. MSW Codes ·································································· 6-48
3.
Bit Value Discrimination ··············································· 6-49
4.
Switch Check (1) ··························································· 6-49
5.
Switch Check (2) ··························································· 6-49
6.
Switch Check (3) ··························································· 6-50
7.
LED, Video Light, IR Light Check ······························· 6-50
8.
Record of Use Check ····················································· 6-51
9.
Record of Self-diagnosis Check ···································· 6-52
—2—
* The camera optical axis frame is shown on page 6-53.
The camera color reproduction frame is shown on page
6-54.
DCR-TRV255E/TRV260/TRV265/TRV265E
SECTION 6
ADJUSTMENTS
1.
Before Starting Adjustments
EVR Data Re-writing Procedure When Replacing Board
The data that is stored in the repair board, is not necessarily correct.
Perform either procedure 1 or procedure 2 or procedure 3 when replacing board.
Procedure 1
Save the EVR data of the machine in which a board is going to be replaced. Download the saved data after a
board is replaced.
(Machine before starting repair)
PC
PC
(Machine after a board is replaced)
Download the saved
data to a machine.
Save the EVR data
to a personal computer.
Procedure 2
Remove the EEPROM from the board of the machine that is going to be repaired. Install the removed
EEPROM to the replaced board.
Remove the EEPROM and install it.
(Former board)
(New board)
Procedure 3
When the data cannot be saved due to defective EEPROM, or when the EEPROM cannot be removed or
installed, save the data from the same model of the same destination, and download it.
(Machine to be repaired)
(Machine to be repaired)
PC
Download the data.
Save the data.
(The same model of the same destination)
After the EVR data is saved and downloaded, check the
respective items of the EVR data.
(Refer to page 6-3 for the items to be checked)
6-1
DCR-TRV255E/TRV260/TRV265/TRV265E
1-1. Adjusting Items when Replacing Main Parts and Boards
• Adjusting items when replacing main parts
When replacing main parts, adjust the items indicated by z in the following table.
Adjustment
Initialization of 8, A, C, D,
E, F, 1C, 1F page data
Initializing of A, D page data
Initializing of 8, C, 1C page data
Initializing of E, F, 1F page data
HALL adj.
Flange back adj.
Optical axis adj.
Color reproduction adj.
LV standard data input
AWB standard data input
Auto white balance adj.
Steadyshot check
LCD level adj.
LCD V-COM adj.
LCD White balance adj.
Node uniqe ID No. input
CAP FG/REEL FG duty adj.
Switching position adj.
SD error rate check (LP)
27 MHz origin osillation adj.
S VIDEO OUT Y level adj.
S VIDEO OUT C level adj.
Tape path adj.
Lens device
Video light (Note 2)
LCD block LCD901
LCD block ND901
Mechanism deck (Note 1)
Mechanism deck M901
Mechanism deck M902
CD-471 board IC951
VC-344 board IC1501, X1501
VC-344 board IC1502
VC-344 board IC3301
VC-344 board IC6501
VC-344 board IC1601
PD-204 board IC6001
Adjustment Section
(Drum assembly) (Note 1)
(Capstan motor)
(CCD imager)
(Timing generator)
(S/H, AGC, A/D CONV.)
(DV signal process, D/A Converter, Lens control)
(Y/C MIX, Buffer)
(EVR)
(LCD driver)
(LCD panel)
(Fluorescent tube)
Replaced part
Block replacement Mounted part replacement
Camera
LCD
System control
Servo, RF
Video
Mechanism
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z z
z
z
z z
z z
z
z
z
z z
z z
z z z
Table 6-1-1 (1)
Note 1: When replacing the drum assy or mechanism deck, reset the data of page: 7, address: A7 to A9.
(Refer to “Record of Use Check” of “6-4. SERVICE MODE”)
Note 2: When replacing the video light, reset the data of page: 7, address: CE and CF.
(Refer to “Record of Use Check” of “6-4. SERVICE MODE”)
6-2
DCR-TRV255E/TRV260/TRV265/TRV265E
• Adjusting items when replacing a board or EEPROM
When replacing a board or EEPROM, adjust the items indicated by z in the following table.
Camera
LCD
System control
Servo, RF
Video
Mechanism
z
z
z
Table 6-1-1 (2)
6-3
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
Supporting
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
RadarW
(EEPROM)
VC-344 board IC4502
Initializing of A, D page data
Initializing of 8, C, 1C page data
Initializing of E, F, 1F page data
HALL adj.
Flange back adj.
Optical axis adj.
Color reproduction adj.
LV standard data input
AWB standard data input
Auto white balance adj.
Steadyshot check
LCD level adj.
LCD V-COM adj.
LCD White balance adj.
Node uniqe ID No. input
CAP FG/REEL FG duty adj.
Switching position adj.
SD error rate check (LP)
27 MHz origin osillation adj.
S VIDEO OUT Y level adj.
S VIDEO OUT C level adj.
Tape path adj.
(COMPLETE)
Initialization of 8, A, C, D,
E, F, 1C, 1F page data
VC-344 board
Adjustment
PD-204 board
Adjustment Section
(COMPLETE)
Replaced part
z
z
z
z
z
z
z
z
z
z
DCR-TRV255E/TRV260/TRV265/TRV265E
6-1. CAMERA SECTION ADJUSTMENTS
1-1.
PREPARATIONS BEFORE ADJUSTMENTS (CAMERA SECTION)
1-1-1. List of Service Tools
• Oscilloscope
• Regulated power supply
Ref. No.
J-1
J-2
J-3
J-4
J-5
J-6
J-7
J-8
J-9
J-10
J-11
• Color monitor
• Digital voltmeter
Name
• Vectorscope
• Frequency counter
Parts Code
Filter for color temperature correction (C14)
J-6080-058-A
ND filter 1.0
ND filter 0.4
ND filter 0.1
Pattern box PTB-450
Color chart for pattern box
Adjustment remote commander (RM-95 upgraded).
Siemens star chart
Clear chart for pattern box
CPC jig connector
I/F unit for LANC control
Mini pattern box
Camera table
J-6080-808-A
J-6080-806-A
J-6080-807-A
J-6082-200-A
J-6020-250-A
J-6082-053-B
J-6080-875-A
J-6080-621-A
J-6082-539-A
J-6082-521-A
J-6082-353-B
J-6082-384-A
Usage
Auto white balance adjustment/check
White balance adjustment/check
White balance check
White balance check
White balance check
For checking the flange back
For connecting the adjustment remote commander
For connecting the adjustment remote commander
For adjusting the flange back
For adjusting the flange back
J-1
J-2
J-3
J-4
J-5
J-6
J-7
J-8
J-9
J-10
J-11
Fig. 6-1-1
6-4
DCR-TRV255E/TRV260/TRV265/TRV265E
1-1-2. Preparations
Pattern box
Note: Before perform the adjustment, check that the data of page:
0, address: 10 is “00”.
If not, select page: 0, address: 10, and set data “00”.
1) Connect the equipment for adjustments according to Fig. 6-13.
2) Connect the adjustment remote commander to VC-344 board
CN1011 via I/F unit for LANC control (J-6082-521-A) and
CPC jig connector (J-6082-539-A). (Fig. 6-1-3)
To operate the adjustment remote commander, connect the AC
power adaptor to the DC IN jack of I/F unit for LANC control,
or connect the L series Info-LITHIUM battery to the battery
terminal of I/F unit for LANC control.
1m
Front of the lens
Fig. 6-1-2
CN1011
1
16
A/V OUT jack
CPC lid
Audio R (red)
Screw (M2)
Audio L (white)
TV monitor Vector scope
L serices Info
LITHIUM battery (7.2Vdc)
Terminated at 75Ω
Video (yellow)
AC adaptor
AC IN
AC adaptor
Conductor side
LANC jack
Adjustment
remote commander (RM-95)
CPC jig connector
(J-6082-539-A)
I/F unit for LANC control
(J-6082-521-A)
Fig. 6-1-3
6-5
AC IN
DCR-TRV255E/TRV260/TRV265/TRV265E
1-1-3. Precaution
1. Setting the Switch
Unless otherwise specified, set the switches as follows and perform adjustments without loading cassette.
1.
2.
3.
4.
5.
6.
POWER switch (SS-5100 block) .......................... CAMERA
FOCUS (CF-5100 block) ..................................... MANUAL
BACK LIGHT (CF-5100 block) .................................... OFF
PROGRAM AE (MENU setting) ................................ AUTO
NIGHTSHOT PLUS switch (Lens block) ..................... OFF
EXPOSURE (CF-5100 block) .................................... AUTO
7.
8.
9.
10.
11.
P EFFECT (MENU setting) ........................................... OFF
D ZOOM (MENU setting) ............................................. OFF
DEMO MODE (MENU setting) .................................... OFF
16 : 9 WIDE (MENU setting) ........................................ OFF
DISPLAY (MENU setting) ............................................ LCD
2. Order of Adjustments
Basically carry out adjustments in the order given.
Color bar chart (Color reproduction adjustment frame)
Electronic beam scanning frame
C
C=D
D
Yellow
Cyan
Green
White
Magenta
Red
Blue
Blue
Yellow
Cyan
Green
White
Magenta
Red
H
CRT picture frame
V
A B
A=B
B A
Fig. b (monitor TV picture)
Enlargement
Fig. a
(VIDEO terminal of A/V jack
output waveform)
Difference in level
B
Adjust the camera zoom and direction to
obtain the output waveform shown in Fig. a and
the monitor TV display shown in Fig. b.
A
Fig. 6-1-4
3. Subjects
1) Color bar chart (Color reproduction adjustment frame)
When performing adjustments using the color bar chart, adjust
the picture frame as shown in Fig. 6-1-4. (Color reproduction
adjustment frame)
2) Clear chart (Color reproduction adjustment frame)
Remove the color bar chart from the pattern box and insert a
clear chart in its place. (Do not perform zoom operations during
this time)
3) Chart for flange back adjustment
Join together a piece of white A0 size paper (1189mm × 841
mm) and a piece of black paper to make the chart shown in
Fig. 6-1-5.
White
841 mm
Black
Note: Use a non-reflecting and non-glazing vellum paper. The
size must be A0 or larger and the joint between the white
and black paper must not have any undulations.
1189 mm
Fig. 6-1-5
6-6
DCR-TRV255E/TRV260/TRV265/TRV265E
1-2.
2.
INITIALIZATION OF 8, A, C, D, E, F, 1C, 1F
PAGE DATA
Note: If reading/writing data on pages 1C, 1F, set data: 01 to
page: 0, address: 10, and then select pages C, F. By this
data setting, the pages 1C, 1F can be selected.
After the data reading/writing finished, return the data on
page: 0, address: 10 to “00”.
Version check method:
1) Select page: 3, and address: FF.
2) The version of IC4501 can be checked from the displayed data.
1-2-1. Version Check
Due to the change of IC4501 (mechanism control), there are two
types of versions A and B.
The EEPROM data are different according to respective versions.
Also, the IC4501 version can be checked by a discrimination
method by the model name or by the adjusting remote commander.
Note 1: Changing the version does not make any changes in schematic diagrams and the rest.
Note 2: Make it sure to confirm the version after replacing
IC4501.
1.
Discrimination Method by Adjusting Remote
Commander
Data
Version
01
A
02
B
Data change method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 1C, and input the data in the following table.
Note: To write in the non-volatile memory (EEPROM), press the
PAUSE button of the adjustment remote commander each
time to set the data.
3) Select page: 0, address: 01, and set data: 00.
Discrimination Method by the Model Name of
IC4501 (Mechanism Control)
Version
Address
VC-344 BOARD (SIDE A)
D0
IC4501
154 : A
155 : B
Fig. 6-1-6
6-7
A
B
40
42
DCR-TRV255E/TRV260/TRV265/TRV265E
1-2-2. Initialization of A, D Page Data
Note: Check that the data of page: 0, address: 10 is “00”.
2. Modification of A, D Page Data
If the A, D page data has been initialized, change the data of
the“Fixed data-2” address shown in the following table by manual
input.
1. Initializing the A, D Page Data
Note 1: If “Initialization of Pages A, D” is executed, all data on
pages A, D are initialized. (Only an individual page cannot be initialized)
Note 2: If the A, D page data has been initialized, the following
adjustments need to be performed again.
1) Modification of A, D page data
Note 3: NTSC model: DCR-TRV260/TRV265
PAL model: DCR-TRV255E/TRV265E
Adjustment Page
A
Adjustment Address
10 to FF
Adjustment Page
D
Adjustment Address
10 to 7F
Modifying method:
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note 1: If copy the data built in the different model, the
camcorder may not operate.
3) When changing the data, press the PAUSE button of the adjustment remote commander each time when setting new data
to write the data in the non-volatile memory.
4) Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
Initializing method:
Processing after completing modification A, D page data:
Order Page Address Data
1
0
01
01
2
0
10
00
Order Page Address Data
Set the following data.
00: NTSC model
80: PAL model
3
7
03
4
7
00
28
5
7
01
28
6
7
02
7
Procedure
1
2
00
29
2
2
01
29
Procedure
Press PAUSE button.
Note 2: If the following symptoms occur after completing of
the“Modification A, D page data”, check that the data of
the “Fixed data-2” addresses of A, D page are same as
those of the same model of the same destination.
1) The power is shut off so that unit cannot operate.
Press PAUSE button.
Check the data changes to
“01”.
Perform “Modification of A,
D Page Data”
6-8
DCR-TRV255E/TRV260/TRV265/TRV265E
3. A Page Table
Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the A, D Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of A, D Page Data”)
Address
10 to 19
1A
1B to 30
31
32
33 to 49
4A
4B to 4E
4F
50, 51
52
53
54 to 64
65
66 to 7F
80
81
82 to 8F
90
91 to 96
97
98
99 to DF
Initial value
Address
F5
F6
F7
F8
Fixed data-1 (Initialized data)
Fixed data-2
FA
Fixed data-1 (Initialized data)
FB
FC
Fixed data-2
FD
Fixed data-1 (Initialized data)
FE, FF
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
4. D Page Table
Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the A, D Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of A, D Page Data”)
Fixed data-2
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
Fixed data-2
Address
Fixed data-1 (Initialized data)
10
Fixed data-2
11
12
Fixed data-1 (Initialized data)
13
Fixed data-2
14 to 21
Fixed data-1 (Initialized data)
Initial value
Remark
NTSC PAL
00
00
Test mode
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
22
A: Fixed data-2
B: Fixed data-1 (Initialized data)
(Refer to “1-2-1. Version Check”.)
23
24
Fixed data-2
25
Fixed data-1 (Initialized data)
26
27 to 29
E1
2A
E2
2B
E3
2C to 35
E4
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
36
E5
37
E6
Fixed data-2
38
E7
39
E8
EA
Fixed data-2
F9
E0
E9
Remark
F4
Remark
NTSC PAL
Initial value
NTSC PAL
3A
Fixed data-2
3B to 55
EB
EC
ED
Fixed data-2
57
Fixed data-1 (Initialized data)
58
Fixed data-2
6F
EF
70 to 7F
F0
F1
F2
F3
6-9
Fixed data-2
Fixed data-1 (Initialized data)
56
59 to 6E
EE
Fixed data-1 (Initialized data)
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
DCR-TRV255E/TRV260/TRV265/TRV265E
1-2-3. Initialization of 8, C, 1C Page Data
Note: If reading/writing data on pages 1C, set data: 01 to page:
0, address: 10, and then select pages C. By this data setting, the pages 1C can be selected.
After the data reading/writing finished, return the data on
page: 0, address: 10 to “00”.
2. Modification of 8, C, 1C Page Data
If the 8, C, 1C page data has been initialized, change the data of
the “Fixed data-2” address shown in the following table by manual
input.
Modifying method:
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) If modification of data on pages 8, C, set data: 00 to page: 0,
address: 10, and then select pages 8, C.
3) If modification of data on pages 1C, set data: 01 to page: 0,
address: 10, and then select pages C. After the modification of
data finished, return the data on page: 0, address: 10 to “00”.
4) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note: If copy the data built in the different model, the
camcorder may not operate.
5) When changing the data, press the PAUSE button of the adjustment remote commander each time when setting new data
to write the data in the non-volatile memory.
6) Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
1. Initializing the 8, C, 1C Page Data
Note 1: If “Initialization of Pages 8, C, 1C” is executed, all data
on pages 8, C, 1C are initialized. (Only an individual
page cannot be initialized)
Note 2: If the 8, C, 1C page data has been initialized, the following adjustments need to be performed again.
1) Modification of 8, C, 1C page data
2) Electronic viewfinder system adjustments
3) LCD system adjustments
4) Node unique ID No. input
5) Servo, RF system adjustments
6) “S VIDEO OUT Y level adjustment” and “S VIDEO
OUT C level adjustment” of video system adjustments.
Adjustment Page
8
Adjustment Address
00 to FF
Adjustment Page
C
Processing after completing modification 8, C, 1C page data:
Adjustment Address
10 to FF
Order Page Address Data
Adjustment Page
1C
1
0
10
00
Adjustment Address
00 to FF
2
2
00
29
3
2
01
29
Procedure
Press PAUSE button.
Initializing method:
Order Page Address Data
1
0
01
01
2
0
10
00
3
3
81
10
4
3
80
0C
5
3
80
6
Procedure
3. 8 Page Table
Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the 8, C, 1C Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, C, 1C Page Data”)
Press PAUSE button.
Check the data changes to
“1C”.
Address
Perform “Modification of 8,
C, 1C Page Data”
00 to AB
AC
AD to C3
Initial value
Remark
NTSC PAL
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
C4
C5
C6
Fixed data-2
C7
C8 to FF
6-10
Fixed data-1 (Initialized data)
DCR-TRV255E/TRV260/TRV265/TRV265E
4. C Page Table
Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the 8, C, 1C Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, C, 1C Page Data”)
Address
Initial value
Address
Remark
NTSC PAL
Initial value
NTSC PAL
E3
01
01
E4
02
02
E5
00
00
E6
00
00
E7
00
00
10
EE
EE
E8 to F3
11
00
00
F4
00
00
12
00
00
F5
00
00
13
00
00
F6
00
00
F7
00
00
F8
00
00
F9
00
00
Fixed data-1 (Initialized data)
FA
00
00
S VIDEO OUT Y level adj.
FB
00
00
FC
00
00
14, 15
Fixed data-1 (Initialized data)
16
E0
E0
17
E0
E0
18 to 24
25
86
86
26
90
90
27
60
60
28 to 2E
2F
Switching position adj.
0E
0E
30 to 4D
CAP FG/REEL FG duty adj.
S VIDEO OUT C level adj.
FD
00
00
FE
00
00
CAP FG/REEL FG duty adj.
FF
00
00
4E
Fixed data-2
4F
Fixed data-1 (Initialized data)
50
7C
7C
51
8B
8B
52
89
89
LCD level adj. (VCO adj.)
LCD V-COM adj.
53
Fixed data-2
54
Fixed data-1 (Initialized data)
55
Fixed data-2
56
6F
6F
57
4B
4B
58
75
75
59 to 5B
LCD White balance adj.
LCD level adj. (Contrast adj.)
Fixed data-1 (Initialized data)
5C
Fixed data-2
5D
5E to 65
Fixed data-1 (Initialized data)
66
Fixed data-2
67 to 74
Fixed data-1 (Initialized data)
75
Fixed data-2
76 to AC
Fixed data-1 (Initialized data)
AD
Fixed data-2
AE to D2
Fixed data-1 (Initialized data)
D3
D4
Fixed data-2
D5
D6
D7 to DE
Fixed data-1 (Initialized data)
DF
Fixed data-2
E0
08
08
E1
00
00
E2
46
46
Node unique ID No. input
6-11
Node unique ID No. input
Fixed data-1 (Initialized data)
Fixed data-1 (Initialized data)
Fixed data-1 (Initialized data)
Remark
Emergency memory
DCR-TRV255E/TRV260/TRV265/TRV265E
5. 1C Page Table
Note 1: If reading/writing data on pages 1C, set data: 01 to page:
0, address: 10, and then select pages C. By this data setting, the pages 1C can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the 8, C, 1C Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, C, 1C Page Data”)
Address
Initial value
00 to 08
09
Fixed data-1 (Initialized data)
FF
FF
B3
00
00
B4
00
00
B5
00
00
B6
00
00
B7
00
00
B8
80
80
0A to B2
B9
00
00
00
00
BB
00
00
BC
00
00
BD
00
00
BE
00
00
BF
00
00
C0
00
00
C1
00
00
C2
00
00
C3
80
80
C4
00
00
C5
00
00
C6
00
00
C7
00
00
C8
00
00
D0
D1 to FF
Test mode
Fixed data-1 (Initialized data)
BA
C9 to CF
Remark
NTSC PAL
SD error rate check (LP)
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
6-12
DCR-TRV255E/TRV260/TRV265/TRV265E
1-2-4. Initialization of E, F, 1F Page Data
Note: Check that the data of page: 0, address: 10 is “00”.
2. Modification of E, F, 1F Page Data
If the E, F, 1F page data has been initialized, change the data of
the “Fixed data-2” address shown in the following table by manual
input.
1. Initializing the E, F, 1F Page Data
Note 1: If “Initialization of Pages E, F, 1F” is executed, all data
on pages E, F, 1F are initialized. (Only an individual page
cannot be initialized)
Note 2: If the E, F, 1F page data has been initialized, the following adjustments need to be performed again.
1) Modification of E, F, 1F page data
2) “27 MHz Origin Oscillation Adjustment” of video
system adjustments
3) Camera system adjustments
Note 3: NTSC model: DCR-TRV260/TRV265
PAL model: DCR-TRV255E/TRV265E
Adjustment Page
Modifying method:
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) If modification of data on pages E, F, set data: 00 to page: 0,
address: 10, and then select pages E, F.
3) If modification of data on pages 1F, set data: 01 to page: 0,
address: 10, and then select pages F. After the modification of
data finished, return the data on page: 0, address: 10 to “00”.
4) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note: If copy the data built in the different model, the
camcorder may not operate.
5) When changing the data, press the PAUSE button of the adjustment remote commander each time when setting new data
to write the data in the non-volatile memory.
6) Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
E
Adjustment Address
00 to FF
Adjustment Page
F
Adjustment Address
10 to FF
Adjustment Page
1F
Adjustment Address
00 to FF
Processing after completing modification E, F, 1F page data:
Initializing method:
Order Page Address Data
1
0
01
Order Page Address Data
Procedure
01
1
0
10
00
2
00
29
2
01
29
2
0
10
00
2
3
6
03
01
3
4
6
01
Set the following data, and
press PAUSE button.
2D: NTSC model
2F: PAL model
5
6
02
Check the data changes to
“01”.
6
Procedure
Press PAUSE button.
3. E Page Table
Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the E, F, 1F Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of E, F, 1F Page Data”)
Perform “Modification of E,
F, 1F Page Data”
Address
00 to 0F
10
11 to B0
B1
B2 to FF
6-13
Initial value
Remark
NTSC PAL
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
DCR-TRV255E/TRV260/TRV265/TRV265E
4. F Page Table
Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the E, F, 1F Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of E, F, 1F Page Data”)
Address
10
Initial value
Remark
NTSC PAL
80
80
11
Address
4F
19
19
50
00
00
51
32
32
52
04
04
53
00
00
27 MHz origin osillation adj.
54
00
00
Fixed data-1 (Initialized data)
55 to 59
12
4A
4A
5A
13
56
56
5B to 8D
14
11
11
8E
15
20
20
16
02
02
17
E0
E0
18, 19
00
00
1B
60
60
1C to 29
29
1B
2B
00
00
2C
07
07
2D
00
00
2E
17
0E
2F
00
00
30
0B
0D
31
00
00
22
22
27
24
3A
00
00
3B
F1
EF
32
35
2A
2B
3F
C0
00
40
59
59
41
00
40
44
28
28
45
EC
EC
46
35
35
47
8F
8F
42, 43
LV standard data input
13
13
49
B8
B8
4A
00
00
4B
00
00
4C
00
00
4D
00
00
4E
2B
2B
Fixed data-2
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
9A
Fixed data-2
9B to A3
Fixed data-1 (Initialized data)
A4
Auto white balance
standard data input
Fixed data-2
A5 to C4
Fixed data-1 (Initialized data)
C5
Fixed data-2
C6
C7 to FF
Fixed data-1 (Initialized data)
Auto white balance adj.
5. 1F Page Table
Note 1: If reading/writing data on pages 1F, set data: 01 to page:
0, address: 10, and then select pages F. By this data setting, the pages 1F can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the E, F, 1F Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of E, F, 1F Page Data”)
Color reproduction adj.
Color reproduction adj.
Color reproduction adj.
Address
00 to 7B
Auto white balance adj.
7C
7D to FF
Fixed data-1 (Initialized data)
48
Optical axis adj.
Fixed data-1 (Initialized data)
97
Fixed data-1 (Initialized data)
3E
FF
98, 99
Fixed data-1 (Initialized data)
3C, 3D
FF
91 to 96
Fixed data-1 (Initialized data)
36 to 39
Flange back adj.
90
Fixed data-1 (Initialized data)
34
Remark
Fixed data-1 (Initialized data)
8F
Fixed data-1 (Initialized data)
2A
33
Hall adj.
Fixed data-1 (Initialized data)
1A
Initial value
NTSC PAL
Flange back adj.
6-14
Initial value
Remark
NTSC PAL
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
DCR-TRV255E/TRV260/TRV265/TRV265E
1-3.
CAMERA SYSTEM ADJUSTMENTS
Before perform the camera system adjustments, check that the
specified values of “27 MHz Origin Oscillation Adjustment”, “S
VIDEO OUT Y level Adjustment” and “S VIDEO OUT C level
Adjustment” of “VIDEO SYSTEM ADJUSTMENT” are satisfied.
Check that the data of page: 0, address: 10, is “00”.
If not, select page: 0, address: 10, and set data “00”
1. HALL Adjustment RadarW
For detecting the position of lens iris, adjust the hall AMP gain
and offset.
Mode
CAMERA
Subject
Not required
Measurement Point
Displayed data of page: 1 (Note 3)
Measuring Instrument
Adjusting remote commander
Adjustment Page
F
Adjustment Address
12 to 17
Specified value
87 to 8B during IRIS OPEN
15 to 19 during IRIS CLOSE
Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
Note 3: The right two digits of the page: 1 displayed data of the
adjusting remote commander.
1:00:XX
Displayed data
Adjusting method:
Order Page Address Data
1
0
01
01
2
6
94
89
3
6
95
17
4
6
01
6D
5
6
02
6
6
01
Procedure
Press PAUSE button. (Note 4)
Check the data changes to
“01”.
00
Press PAUSE button.
Note 4: The adjustment data will be automatically input to page:
F, address: 12 to 17.
Checking method:
Order Page Address Data
1
0
03
03
2
6
01
01
3
1
4
6
5
Procedure
Press PAUSE button.
Check that the displayed data
(Note 3) during IRIS OPEN
satisfied the specified value.
01
03
Press PAUSE button.
Check that the displayed data
(Note 3) during IRIS CLOSE
satisfied the specified value.
1
Processing after completing adjustment:
Order Page Address Data
1
6
01
00
2
6
94
00
3
6
95
00
4
0
03
00
5
0
01
00
Procedure
Press PAUSE button.
6-15
DCR-TRV255E/TRV260/TRV265/TRV265E
2. Flange Back Adjustment RadarW
(Using the Minipattern Box)
The inner focus lens flange back adjustment is carried out
automatically. In whichever case, the focus will be deviated during auto focusing/manual focusing.
Adjusting method:
Order Page Address Data
Procedure
1
0
01
01
2
6
48
01
CAMERA
3
6
01
13
Press PAUSE button.
Subject
Siemens star chart with ND filter for
minipattern box (Note 1)
4
6
01
27
Press PAUSE button. (Note 7)
5
6
02
Measurement Point
Check operation on monitor TV
Mode
Note 7: The adjustment data will be automatically input to page:
F, address: 44 to 54.
Measuring Instrument
Adjustment Page
F
Adjustment Address
44 to 54
Processing after completing adjustment:
Note 1: Dark Siemens star chart.
Note 2: Check that the data of page: 0, address: 10 is “00”.
Note 3: Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
Note 4: Perform the adjustment with the camcorder in horizontal state.
Note 5: Perform “HALL Adjustment” before this adjustment.
Order Page Address Data
Switch setting:
1) NIGHTSHOT PLUS ........................................................ OFF
2) DISPLAY (Menu setting) ............................................... LCD
Specified voltage: The specified voltage varies according to the
minipattern box, so adjust the power supply
output voltage to the specified voltage written
on the sheet which is supplied with the
minipattern box.
Below 3 cm
Minipattern box
Camcorder
Camera
table
Regulated power supply
Output voltage : Specified voltage ±0.01 Vdc
Output current : more than 3.5 A
Red (+)
Black (–)
Yellow (SENS +)
Need not connected
Black (GND)
Fig. 6-1-7
6-16
Procedure
1
6
01
00
Press PAUSE button.
2
6
01
25
Press PAUSE button.
3
6
01
00
Press PAUSE button.
4
6
48
00
5
0
01
00
6
Preparations before adjustments:
1) The minipattern box is installed as shown in the following figure.
Note 6: The attachment lenses are not used.
2) Install the minipattern box so that the distance between it and
the front of lens of camcorder is less than 3 cm.
3) Make the height of minipattern box and the camera equal.
4) Check the output voltage of the regulated power supply is the
specified voltage ± 0.01 Vdc.
5) Check that the center of Siemens star chart meets the center of
shot image screen with the zoom lens at TELE end and WIDE
end respectively.
White (SENS –)
Check the data changes to
“01”.
Perform “Flange Back
Check”.
DCR-TRV255E/TRV260/TRV265/TRV265E
3-2. Flange Back Adjustment (2) RadarW
Perform this adjustment after performing “Flange Back Adjustment (1)”.
3. Flange Back Adjustment
(Using the Flange Back Adjustment Chart and
Subject More than 500 m Away)
The inner focus lens flange back adjustment is carried out automatically. In whichever case, the focus will be deviated during
auto focusing/manual focusing.
Mode
CAMERA
Subject
Subject more than 500 m away
(Subject with clear contrast such as
buildings, etc.)
CAMERA
Measurement Point
Check operation on monitor TV
Flange back adjustment chart
(2.0 m from the front of lens)
(Luminance: 300 to 400 lux)
Measuring Instrument
3-1. Flange Back Adjustment (1) RadarW
Mode
Subject
Measurement Point
Check operation on monitor TV
F
Adjustment Address
44 to 54
F
Adjustment Address
44 to 54
Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
Measuring Instrument
Adjustment Page
Adjustment Page
Switch setting:
1) NIGHTSHOT PLUS ........................................................ OFF
2) DISPLAY (Menu setting) ................................................ LCD
Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
Note 3: Perform the adjustment with the camcorder in horizontal state.
Note 4: Perform “HALL Adjustment” before this adjustment.
Preparations before adjustments:
1) Set the zoom lens to the TELE end and expose a subject that is
more than 500 m away.
(subjects with clear contrast such as building, etc.)
(Nearby subjects less than 500 m away should not be in the
screen)
Switch setting:
1) NIGHTSHOT PLUS ........................................................ OFF
2) DISPLAY (Menu setting) ................................................ LCD
Adjusting method:
Preparations before adjustments:
1) Place the Flange back adjustment chart 2.0 m from the front
of the lens.
2) Check that the center of Flange back adjustment chart meets
the center of shot image screen with the zoom lens at TELE
end and WIDE end respectively.
Order Page Address Data
1
0
01
01
2
6
48
01
3
6
01
13
Order Page Address Data
Procedure
Press PAUSE button.
Place ND filter on the lens so
that the optimum image is
obtain.
4
Adjusting method:
Procedure
5
6
01
6
6
02
29
Press PAUSE button. (Note 3)
1
0
01
01
2
6
48
01
3
6
01
13
Press PAUSE button.
4
6
01
15
Press PAUSE button. (Note 5)
Note 3: The adjustment data will be automatically input to page:
F, address: 44 to 54.
5
6
02
Check the data changes to
“01”.
Processing after completing adjustment:
Order Page Address Data
Note 5: The adjustment data will be automatically input to page:
F, address: 44 to 54.
Processing after completing adjustment:
Order Page Address Data
Procedure
1
6
01
00
Press PAUSE button.
2
6
01
25
Press PAUSE button.
3
6
01
00
Press PAUSE button.
4
6
48
00
5
0
01
00
6
Check the data changes to
“01”.
6
01
00
Press PAUSE button.
2
6
01
25
Press PAUSE button.
3
6
01
00
Press PAUSE button.
4
6
48
00
5
0
01
00
6
Perform “Flange Back
Adjustment (2)”.
6-17
Procedure
1
Perform “Flange Back
Check”.
DCR-TRV255E/TRV260/TRV265/TRV265E
4. Flange Back Check
Mode
CAMERA
Subject
Siemens star
(2.0 m from the front of the lens)
(Luminance: approx. 200 lux)
Measurement Point
Check operation on monitor TV
Measuring Instrument
Specified value
Focused at the TELE end and WIDE
end
Note 1: Check that the data of page: 0, address: 10 is “00”.
Switch setting:
1) NIGHTSHOT PLUS ........................................................ OFF
2) DISPLAY (Menu setting) ................................................ LCD
Note 2: When the auto focus is ON, the lens can be checked if it
is focused or not by observing the data on the page: 1 of
the adjusting remote commander.
1 : 00 : XX
Odd: Focused
Even: Unfocused
Checking method:
Order Page Address Data
Procedure
1
Place the Siemens star 2.0 m
from the front of the lens.
2
To open the IRIS, decrease
the luminous intensity to the
Siemens star up to a point
before noise appear on the
image.
3
6
40
01
4
6
41
01
5
Shoot the Siemens star with
the zoom TELE end.
6
Turn on the auto focus.
7
0
8
1
9
6
03
0F
Check that the lens is
focused. (Note 2)
21
10
10
Shoot the Siemens star with
the zoom WIDE end.
11
Observe the TV monitor and
check that the lens is
focused.
Processing after completing adjustment:
Order Page Address Data
1
6
21
00
2
6
40
00
3
6
41
00
4
0
03
00
Procedure
6-18
DCR-TRV255E/TRV260/TRV265/TRV265E
5. Optical Axis Adjustment
Correct a deviation of optical axis between the lens and the CCD
imager.
If deviated, the screen center will be shifted when the lens is
zoomed from TELE end to WIDE end.
Subject
Siemens Star
Measurement Point
Check operation on monitor TV
9) Select page: F, address: 5A, and set correction data, then press
the PAUSE button on the adjusting remote commander.
10) Shoot the Siemens Star with the zoom at TELE end.
11) Change the lens direction so that the center of Siemens Star
coincides with the center of optical axis deviation specification frame.
12) Shoot the Siemens Star with the zoom at WIDE end.
13) Measure the amount of deviation “L2” (distance from the center of Siemens Star to the center of optical axis deviation specification frame).
14) Compare L1 and L2, and make sure that the L2 is smaller than
L1.
If large, select page: F, address: 5A, and set data: 00, then
press the PAUSE button on the adjusting remote commander.
Measuring Instrument
Adjustment Page
F
Adjustment Address
5A
Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: “Flange Back Adjustment” must be already finished.
Processing after completion of adjustment:
1) Select page: 0, address: 01, and set data: 00.
Switch setting:
1) DIGITAL ZOOM (Menu setting) .................................... OFF
2) STEADYSHOT (Menu setting) ...................................... OFF
3) DISPLAY (Menu setting) ................................................ LCD
Preparation for adjustment:
1) Play a monoscope portion of the System Check tape (WR55NSP (NTSC) or WR5-5CSP (PAL)).
2) Stick the optical axis deviation specification frame to the monitor screen so that the center of monoscope coincides with the
center of specification frame.
3) Select the CAMERA mode.
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: F, address: 5A, and set data: 00, then press the
PAUSE button on the adjusting remote commander.
3) Place the Siemens Star at 2 m position away from the lens.
4) Shoot the Siemens Star with the zoom at TELE end.
5) Change the lens direction so that the center of Siemens Star
coincides with the center of optical axis deviation specification frame.
6) Shoot the Siemens Star with the zoom at WIDE end.
7) Check on the monitor TV which area the center of Siemens
Star exists of the optical axis deviation specification frame.
At this time, measure the amount of deviation “L1” (distance
from the center of Siemens Star to the center of optical axis
deviation specification frame).
8) From the following table, read correction data according to
the area.
Area
Deviation Phase
Correction Data
1
22.6° to 67.5°
01
2
67.6° to 112.5°
02
3
112.6° to 157.5°
03
4
157.6° to 202.5°
04
5
202.6° to 247.5°
05
6
247.6° to 292.5°
06
7
292.6° to 337.5°
07
8
337.6° to 22.5°
08
0
337.5
22.5
8
1
7
292.5
270
67.5
6
2
112.5
247.5
3
5
4
202.5
157.5
180
Fig. 6-1-8
6-19
90
DCR-TRV255E/TRV260/TRV265/TRV265E
6. Picture Frame Setting
Mode
CAMERA
Subject
Color bar chart
(Color reproduction adjustment
frame)
(1.0 m from the front of lens)
Measurement Point
Video terminal of A/V OUT jack
(75 Ω terminated)
Measuring Instrument
Oscilloscope and monitor TV
Specified Value
A=B, C=D, E=F
Check on the oscilloscope
1. Horizontal period
A=B
C=D
B
C
A
D
Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: Perform “Flange Back Adjustment” and “Optical Axis
Adjustment” before this adjustment.
Switch setting:
1) DIGITAL ZOOM (Menu setting) .................................... OFF
2) STEADYSHOT (Menu setting) ...................................... OFF
3) DISPLAY (Menu setting) ................................................ LCD
Setting method:
1) Select page: 6, address: 48, and set data: 01.
2) Adjust the zoom and the camera direction, and set to the specified position.
3) Mark the position of the picture frame on the monitor display,
and adjust the picture frame to this position in following adjustments using “Color reproduction adjustment frame”.
Fig. 6-1-9
2. Vertical period
E=F
E
F
Processing after completing camera system adjustments:
1) Select page: 6, address: 48, and set data: 00.
V
Fig. 6-1-10
Check on the monitor TV (Underscanned mode)
Color bar chart picture frame
Fig. 6-1-11
6-20
Monitor TV picture frame
DCR-TRV255E/TRV260/TRV265/TRV265E
7. Color Reproduction Adjustment
Adjust the color separation matrix coefficient so that proper color
reproduction is produced.
Mode
CAMERA
Subject
Color bar chart
(Color reproduction adjustment
frame)
Measurement Point
Video terminal of A/V OUT jack
(75 Ω terminated)
Measuring Instrument
Vectorscope
Adjustment Page
F
Adjustment Address
33, 35, 3A, 3B
Specified Value
All color luminance points should
settle within each color reproduction
frame.
NTSC model
R-Y
YE
B-Y
B
G
Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: Perform “Flange Back Adjustment” before this adjustment.
Note 3: NTSC model: DCR-TRV260/TRV265
PAL model: DCR-TRV255E/TRV265E
CY
Burst
Switch setting:
1) NIGHTSHOT PLUS ........................................................ OFF
2) DIGITAL ZOOM (Menu setting) .................................... OFF
3) STEADYSHOT (Menu setting) ...................................... OFF
4) DISPLAY (Menu setting) ................................................ LCD
PAL model
R-Y
Burst
Adjusting method:
Order Page Address Data
1
0
01
01
2
6
48
01
3
6
9D
86
4
6
01
3D
5
F
YE
B-Y
Press PAUSE button.
B
80
G
Adjust the GAIN and
PHASE of the vectorscope,
and set to the burst luminance point to the burst
position of color reproduction frame.
F
MG
R
Procedure
Set the following data, and
press PAUSE button.
37: NTSC model
B7: PAL model
6
7
MG
R
CY
Fig. 6-1-12
Change the data and settle
each color luminance point in
each color reproduction
frame. (Note 4)
33
35
3A
3B
Note 4: Be sure to press the PAUSE button of the adjusting remote commander before changing the addresses. If not,
the new data will not be written to the memory.
Processing after completing adjustment:
Order Page Address Data
1
6
01
00
2
6
48
00
3
6
9D
00
4
0
01
00
Procedure
Press PAUSE button.
6-21
DCR-TRV255E/TRV260/TRV265/TRV265E
8. LV Standard Data Input RadarW
Adjust the normal coefficient of the light value.
9. Auto White Balance Standard Data Input RadarW
Adjust the white balance reference at 3200K.
Mode
CAMERA
Mode
CAMERA
Subject
Clear chart
(Color reproduction adjustment frame)
Subject
Clear chart
(Color reproduction adjustment frame)
Measurement Point
Displayed data of page: 1 (Note 4)
Adjustment Page
F
Adjustment Address
2A to 2D
Measuring Instrument
Adjusting remote commander
Adjustment Page
F
Adjustment Address
1A, 1B
Specified Value
0FE0 to 1020
Note 1: Perform “Color Reproduction Adjustment” before this
adjustment.
Note 2: Check that the data of page: 0, address: 10 is “00”.
Note 3: Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
Note 1: Perform “Flange Back Adjustment” before this adjustment.
Note 2: Check that the data of page: 0, address: 10 is “00”.
Note 3: Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
Note 4: The right four digits of the page: 1 displayed data of the
adjusting remote commander.
1:XX:XX
Switch setting:
1) NIGHTSHOT PLUS ........................................................ OFF
2) DIGITAL ZOOM (Menu setting) .................................... OFF
3) STEADYSHOT (Menu setting) ...................................... OFF
4) DISPLAY (Menu setting) ................................................ LCD
Adjusting method:
Displayed data
Order Page Address Data
Switch setting:
1) NIGHTSHOT PLUS ........................................................ OFF
2) DIGITAL ZOOM (Menu setting) .................................... OFF
3) STEADYSHOT (Menu setting) ...................................... OFF
4) DISPLAY (Menu setting) ................................................ LCD
Adjusting method:
Order Page Address Data
1
0
01
2
6
48
01
3
6
01
0D
4
6
02
5
0
03
6
1
2
6
48
00
3
0
03
00
4
0
01
00
01
3
6
01
11
Press PAUSE button.
4
6
01
0B
Press PAUSE button. (Note 4)
5
6
02
Check the data changes to
“01”.
Check the data changes to
“01”.
Order Page Address Data
Processing after completing adjustment:
00
01
48
Processing after completing adjustment:
Note 5: The adjustment data will be automatically input to page:
F, address: 1A and 1B.
01
01
6
Press PAUSE button. (Note 5)
Check that the displayed data
(Note 4) satisfied specified
value.
6
0
2
Note 4: The adjustment data will be automatically input to page:
F, address: 2A to 2D.
1E
1
1
Procedure
01
Order Page Address Data
Procedure
Procedure
Press PAUSE button.
6-22
1
6
01
00
2
6
48
00
3
0
01
00
Procedure
Press PAUSE button.
DCR-TRV255E/TRV260/TRV265/TRV265E
10. Auto White Balance Adjustment RadarW
Adjust to the proper auto white balance output data.
If it is not correct, auto white balance and color reproducibility
will be poor.
Mode
CAMERA
Subject
Clear chart
(Color reproduction adjustment
frame)
Filter
Filter C14 for color temperature
correction
Adjustment Page
F
Adjustment Address
2E to 31, 3E to 41
Note 1: Perform “Auto White Balance Standard Data Input” before this adjustment.
Note 2: Check that the data of page: 0, address: 10 is “00”.
Note 3: Check that the data of page: 6, address: 02 is “00”. If
not, turn the power of unit OFF/ON.
Note 4: NTSC model: DCR-TRV260/TRV265
PAL model: DCR-TRV255E/TRV265E
Switch setting:
1) NIGHTSHOT PLUS ........................................................ OFF
2) DIGITAL ZOOM (Menu setting) .................................... OFF
3) STEADYSHOT (Menu setting) ...................................... OFF
4) DISPLAY (Menu setting) ................................................ LCD
Adjusting method:
Order Page Address Data
1
2
0
01
01
3
6
48
01
4
Procedure
Place the C14 filter on the
lens.
F
3E
Set the following data, and
press PAUSE button.
2D: NTSC model
2C: PAL model
Set the following data, and
press PAUSE button.
10: NTSC model
50: PAL model
5
F
3F
6
F
40
58
Press PAUSE button.
Set the following data, and
press PAUSE button.
50: NTSC model
90: PAL model
7
F
41
8
6
01
83
Press PAUSE button.
9
6
01
81
Press PAUSE button. (Note 5)
10
6
02
Check the data changes to
“01”.
Note 5: The adjustment data will be automatically input to page:
F, address: 2E to 31.
Processing after completing adjustment:
Order Page Address Data
1
6
01
00
2
6
48
00
3
0
01
00
4
Procedure
Press PAUSE button.
Remove the C14 filter on the
lens.
6-23
DCR-TRV255E/TRV260/TRV265/TRV265E
11. Auto White Balance Check RadarW
Checking method:
Order Page Address Data
Mode
CAMERA
Subject
Clear chart
(Color reproduction adjustment
frame)
Filter
Filter C14 for color temperature
correction
ND filter 1.0, 0.4 and 0.1
Measurement Point
Check that the lens is not
covered with either filter.
1
2
Procedure
6
48
01
01
0F
INDOOR check
3
Video terminal of
A/V OUT jack
(75 Ω terminated)
Displayed data of
page: 1 (Note 3)
4
Measuring Instrument
Vectorscope
Adjusting remote
commander
5
Specified Value
Fig. 6-1-13
(A) and (B)
NTSC model
R ratio:
2CD0 to 2D50
B ratio:
5810 to 5890
InOut data:
8000 to 8BC0
6
Press PAUSE button.
Check that the center of the
white luminance point within
the circle shown Fig. 6-1-13
(A)
6
01
00
Press PAUSE button.
OUTDOOR check
Place the C14 filter on the
lens.
6
7
6
01
3F
8
PAL model
R ratio:
2C10 to 2C90
B ratio:
5850 to 58D0
InOut data:
8000 to 8BC0
Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: Perform “Auto White Balance Adjustment” before this
adjustment.
Note 3: The right four digits of the page: 1 displayed data of the
adjusting remote commander.
1:XX:XX
Displayed data
Note 4: NTSC model: DCR-TRV260/TRV265
PAL model: DCR-TRV255E/TRV265E
Press PAUSE button.
Check that the center of the
white luminance point within
the circle shown Fig. 6-1-13
(B)
9
0
10
1
11
0
12
1
03
04
Check that the displayed data
(Note 3) satisfied the R ratio
specified value.
03
05
Check that the displayed data
(Note 3) satisfied the B ratio
specified value.
13
Remove the C14 filter
InOut data check
Place the ND filter 1.5 (1.0 +
0.4 + 0.1) on the lens.
14
Switch setting:
1) NIGHTSHOT PLUS ........................................................ OFF
2) DIGITAL ZOOM (Menu setting) .................................... OFF
3) STEADYSHOT (Menu setting) ...................................... OFF
4) DISPLAY (Menu setting) ................................................ LCD
15
6
01
00
16
0
03
06
17
1
Press PAUSE button.
Check that the displayed data
(Note 3) satisfied the InOut
data specified value.
Processing after completing adjustment:
R-Y
2 mm
Order Page Address Data
B-Y
2 mm
6
01
00
2
6
48
00
3
0
03
00
4
Fig. 6-1-13 (A)
R-Y
1 mm
0.5 mm
1
B-Y
3 mm
3 mm
Fig. 6-1-13 (B)
6-24
Procedure
Press PAUSE button.
Remove the ND filter 1.5
(1.0 + 0.4 + 0.1) on the lens.
DCR-TRV255E/TRV260/TRV265/TRV265E
12. Steadyshot Check RadarW
Check the sensorless steadyshot operation.
13. CCD Defect Check RadarW
Mode
CAMERA
Mode
CAMERA
Subject
Not required
Subject
Not required
Measurement Point
Check on the monitor TV
Measurement Point
Check on the monitor TV
Measuring Instrument
Measuring Instrument
Note: Check that the data of page: 0, address: 10 is “00”.
Note: Check that the data of page: 0, address: 10 is “00”.
Checking method:
Switch setting:
1) ZOOM ..................................................................... TELE end
2) STEADYSHOT (Menu setting) ........................................ ON
Order Page Address Data
Checking method:
Order Page Address Data
6
01
F1
2
6
D0
1E
3
6
D1
03
4
6
D2
03
5
6
40
01
Check that a pattern screen
rolls in horizontal direction.
6
6
40
02
Check that a rolling of the
pattern screen becomes small.
6
40
00
2
6
D2
00
3
6
D1
00
4
6
D0
00
5
6
01
00
01
05
2
6
1F
CC
3
6
40
03
5
Procedure
Press PAUSE button.
Check on the monitor screen
that no defect is found.
4
Press PAUSE button.
6
40
04
Check on the monitor screen
that no defect is found.
6
Processing after completing adjustment:
Order Page Address Data
Processing after completing adjustment:
1
6
Procedure
1
Order Page Address Data
1
Procedure
Press PAUSE button.
6-25
1
6
01
00
2
3
6
40
00
6
1F
00
Procedure
Press PAUSE button.
DCR-TRV255E/TRV260/TRV265/TRV265E
1-4.
1. LCD Level Adjustment (PD-204 Board) RadarW
This adjustment does the following items automatically.
VCO Adjustment
Contrast Adjustment
LCD SYSTEM ADJUSTMENTS
Before perform the LCD system adjustments, check that the data
of page: 0, address: 10 is “00”.
If not, select page: 0, address: 10, and set the data “00”.
Mode
Note 1: When replacing the LCD unit, be careful to prevent damages caused by static electricity.
Note 2: Set the LCD BRIGHT (Menu setting) to the center.
Set the LCD B.L. (Menu setting) to the BRIGHT.
Set the LCD COLOR (Menu setting) to the center.
Note 3: Open the LCD panel during the LCD system adjustment.
VTR stop (PLAY/EDIT mode)
Signal
No signal
Adjustment Page
C
Adjustment Address
50, 51 (VCO Adjustment)
58 (Contrast Adjustment)
Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: NTSC model: DCR-TRV260/TRV265
PAL model: DCR-TRV255E/TRV265E
Adjusting method:
Order Page Address Data
Procedure
1
0
01
01
2
3
01
5A
3
3
02
Check the data changes to
“00”.
4
3
03
Check that the data is “00”.
(Note 4)
5
C
50
Read the data and this data is
named D50.
Press PAUSE button. (Note 3)
6
Convert D50 to decimal notation,
and obtain D50’. (Note 5)
7
Calculate D51’ using following
equations. (decimal calculation)
D51’ = D50’ + 18 (NTSC model)
D51’ = D50’ – 18 (PAL model)
8
Convert D51’ to a hexadecimal
number, and obtain D51.
(Note 5, 6)
9
C
51
D51
10
0
01
00
Press PAUSE button.
Note 3: The adjustment data will be automatically input to page:
C, address: 50, 51 and 58.
Note 4: If the data is other than “00”, adjustment has errors.
For the error contents, see the following table.
Note 5: Refer to table 6-4-1. “Hexadecimal-decimal conversion
table”.
Note 6: If D51’ > 255, then D51 = FF (NTSC model)
If D51’ < 0, then D51 = 00 (PAL model)
Page Address Data
03
3
6-26
C6
Error contents
01
Adjustment time out.
60
Contrast adjustment error
62
VCO adjustment error
DCR-TRV255E/TRV260/TRV265/TRV265E
3. LCD White Balance Adjustment (PD-204 Board)
Correct the white balance.
If deviated, the LCD screen color cannot be reproduced.
2. LCD V-COM Adjustment (PD-204 Board)
Set the DC bias of the common electrode drive signal of LCD to
the specified value.
If deviated, the LCD display will be move, producing flicker and
conspicuous vertical lines.
Mode
VTR stop (PLAY/EDIT mode)
Signal
No signal
Measurement Point
Check on LCD screen
Mode
C
Adjustment Address
52
Specified Value
The brightness difference between
the section-A and section-B is
minimum
Signal
No signal
Measurement Point
Check on LCD screen
Measuring Instrument
Measuring Instrument
Adjustment Page
VTR stop (PLAY/EDIT mode)
Adjustment Page
C
Adjustment Address
56, 57
Specified Value
LCD screen must not be colored
Note 1: Perform “LCD Level Adjustment” before this adjustment.
Note 2: Check that the data of page: 0, address: 10 is “00”.
Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: Check the white balance only when replacing the following parts. If necessary, adjust them.
1. LCD panel
2. Light induction plate
3. IC6001
Adjusting method:
Adjusting method:
Order Page Address Data
1
2
0
C
01
Procedure
Order Page Address Data
01
52
1
0
01
01
Change the data so that
brightness of the section A
and section B is equal.
2
C
56
6F
3
C
57
4B
4
3
C
52
Subtract 8 from the data.
4
C
52
Press PAUSE button.
5
0
01
A
A
B
B
A
A
B
Press PAUSE button.
Press PAUSE button.
Check that the LCD screen is
not colored. If not colored,
proceed to step 6.
00
B
Procedure
5
C
56
57
6
0
01
Change the data so that the
LCD screen is not colored.
(Note 3)
00
Note 3: To write in the non-volatile memory (EEPROM), press
the PAUSE button each time to set the data.
Fig. 6-1-14
6-27
DCR-TRV255E/TRV260/TRV265/TRV265E
6-2. MECHANISM SECTION
ADJUSTMENTS
2-3.
Mechanism Section adjustments, checks, and replacement of
mechanism parts, refer to the separate volume “8mm Video Mechanical Adjustment Manual IX M2000 Mechanism ”.
1) Connect the adjustment remote commander.
2) Turn the HOLD switch of the adjustment remote commander
to the ON position.
3) Close the cassette compartment without the cassette.
4) Select page: 3, address: 01, and set data: 0B, and press the
PAUSE button of the adjustment remote commander.
(The mechanism enters the playback mode automatically.)
Note: The function buttons becomes inoperable.
5) To quit the playback mode, select page: 3, address: 01, set
data: 00, and press the PAUSE button of the adjustment remote commander. (Whenever you want to quit the playback
mode, be sure to quit following this procedure.)
Note 1: Before perform the adjustments, check that the data of
page: 0, address: 10 is “00”.
If not, select page: 0, address: 10, and set the data “00”.
Note 2: NTSC model: DCR-TRV260/TRV265
PAL model: DCR-TRV255E/TRV265E
2-1.
ADJUSTMENT REMOTE COMMANDER
Connect the adjustment remote commander to CN1011 of VC344 board via I/F unit for LANC control (J-6082-521-A) and CPC
jig connector (J-6082-539-A). To operate the adjustment remote
commander, connect the AC power adapter (8.4Vdc) to the DC IN
jack of I/F unit for LANC control, or connect the L series InfoLITHIUM battery to the battery terminal of I/F unit for LANC
control.
2-2.
HOW TO ENTER PLAYBACK MODE
WITHOUT CASSETTE
HOW TO ENTER RECORD MODE
WITHOUT CASSETTE
1) Connect the adjustment remote commander.
2) Turn the HOLD switch of the adjustment remote commander
to the ON position.
3) Close the cassette compartment without the cassette.
4) Select page: 3, address: 01, and set data: 0C, and press the
PAUSE button of the adjustment remote commander.
(The mechanism enters the record mode automatically.)
Note: The function buttons becomes inoperable.
5) To quit the record mode, select page: 3, address: 01, set data:
00, and press the PAUSE button of the adjustment remote commander. (Whenever you want to quit the record mode, be sure
to quit following this procedure.)
TG3
TG4
TG5
TG6
Capstan shaft
TG2
TG7
Drum
TG1
Pinch roller
T reel
S reel
Fig. 6-2-1
6-28
DCR-TRV255E/TRV260/TRV265/TRV265E
2-4.
TAPE PATH ADJUSTMENT
2-4-1. Preparations for Adjustment
1) Clean the tape path face (tape guide, drum, capstan shaft, pinch
roller).
2) Connect the adjustment remote commander.
3) Turn on the HOLD switch of the adjustment remote commander.
4) Select page: 3, address: 33, and set data: 08.
5) Connect the oscilloscope to I/F unit for LANC control.
Channel 1: PB RF (MON)
Channel 2: SWP
Note: Connect a 75 Ω resistor between the test point PB
RF (MON) and GND.
75 Ω resistor (Parts code: 1-247-804-11)
6) Playback the SW/OL standard tape. (WR5-2D)
7) Check that the oscilloscope RF waveform is flat at the entrance
and exit.
If not flat, perform the following section 2-4-2. until it is flat.
8) Perform “Processing after operations”, after completing adjustment.
Normal
CH1
CH2
Entrance side faulty
CH1
Test point of I/F unit for LANC control
Pin No.
Signal Name
BL
14
EVF VG
9
PB RF (MON)
3
BPF MONI
TMS
Pin No.
15
Signal Name
EVF VCO
CH2
BL 4.75
6, 8 ,10 GND
7
REC RF (RF IN)
TDI
TDO
5
SWP
TCK
4
CAP FG
2
Exit side faulty
CH1
IR VIDEO
Note: Pin No. are those of CN1011.
Table 6-2-1.
[Processing after operations]
1) Connect the adjustment remote commander, and turn on the
HOLD switch.
2) Select page: 3, address: 33, and set data: 00.
3) Remove the power supply from the unit.
CH2
Fig. 6-2-2
6-29
DCR-TRV255E/TRV260/TRV265/TRV265E
2-4-2.
Tape Path Adjustment
1) Playback the SW/OL standard tape. (WR5-2D)
2) Turn the tape guide No.3 and No.6 alternately until the waveform becomes flat. (Fig. 6-2-5)
Note: Zenith adjustment screws for the TG3 and TG6 do not
need to be adjusted.
[Entrance side adjustment]
3) Turn the No.3 guide slowly in the clockwise direction until
the waveform amplitude at the entrance side begins to become
small. (Fig. 6-2-6 (A))
Confirm the rotation angle (A) of the No.3 guide.
4) Turn the No.3 guide slowly in the counterclockwise direction
until the waveform becomes flat. (Fig. 6-2-5)
5) Turn the No.3 guide slowly in the counterclockwise direction
until the waveform amplitude at the entrance side begins to
become small. (Fig. 6-2-6 (B))
Confirm the rotation angle (B) of the No.3 guide.
6) Turn the No.3 guide slowly in the clockwise direction and set
up in the angle (C) in the middle of the rotation angle (A) and
the rotation angle (B). (Fig. 6-2-4)
[Exit side adjustment]
7) Turn the No.6 guide slowly in the clockwise direction until
the waveform amplitude at the exit side begins to become small.
(Fig. 6-2-7 (A))
Confirm the rotation angle (A) of the No.6 guide.
8) Turn the No.6 guide slowly in the counterclockwise direction
until the waveform becomes flat. (Fig. 6-2-5)
9) Turn the No.6 guide slowly in the counterclockwise direction
until the waveform amplitude at the exit side begins to become small. (Fig. 6-2-7 (B))
Confirm the rotation angle (B) of the No.6 guide.
10) Turn the No.3 guide slowly in the clockwise direction and set
up in the angle (C) in the middle of the rotation angle (A) and
the rotation angle (B). (Fig. 6-2-4)
Fig. 6-2-5
Entrance side amplitude
Fig. 6-2-6 (A)
Entrance side amplitude
No.6 guide
(TG6)
Fig. 6-2-6 (B)
No.3 guide
(TG3)
Exit side amplitude
Guide zenith adjustment screw
Fig. 6-2-3
Fig. 6-2-7 (A)
Exit side amplitude
C
B
A
No.3 guide
or
No.6 guide
Fig. 6-2-4
Fig. 6-2-7 (B)
6-30
DCR-TRV255E/TRV260/TRV265/TRV265E
2-4-3.
No.7 Guide (TG7) Adjustment
2-5.
1) Playback a tape in REV mode.
2) Confirm that tape slack dose not occur in between the guide
No.6 (TG6) 1 and capstan 2. If the tape slack is found, turn
the height adjustment screw 4 of the Guide No.7 (TG7) 3
until tape slack is removed.
3) Playback a tape in normal mode. Confirm that tape slack dose
not occur in between the guide No.7 (TG7) 3 and capstan 2.
(Specification = 0.5 mm or less) If the tape slack of more than
0.5 mm is found, turn the height adjustment screw 4 until the
slack is 0.5 mm or less. Playback a tape in REV mode and
confirm that tape slack occurred in between the guide No.6
(TG6) 1 and capstan 2 is 0.3 mm or less, the adjustment is
complete.
CHECKS AFTER ADJUSTMENTS
2-5-1. Waveform Build-up Check
1) Playback the SW/OL standard tape.
2) Eject the tape once, insert and load the tape.
3) Start playing back the tape and confirm that the RF waveform
builds up in three seconds with flat envelope. Confirm at this
time that tape slack dose not occur near pinch roller.
4) Playback the tape in CUE/REV and FF/REW modes respectively. Confirm that the RF waveform builds up in three seconds with flat envelope. Confirm at this time that tape slack
dose not occur near pinch roller.
5) Repeat the check items 2) to 5) again.
Capstan
2 Capstan
No.7 guide
(TG7)
1 No.6 guide
(TG6)
4 TG7 nut
No.6 guide
(TG6)
3 No.7 guide
(TG7)
Tape slack
Tape slack
Fig. 6-2-8
Fig. 6-2-10
2-4-4. CUE, REV Waveforms Check
1) Playback the SW/OL standard tape (WR5-2D) in REV mode.
Confirm that pitches between the peaks of the waveform are
equally spaced for 5 seconds or longer.
The pitches are not equally spaced, perform section “2-4-2.
Tape Path Adjustment” and section “2-4-3. No.7 Guide (TG7)
Adjustment”.
2) Playback the SW/OL standard tape in CUE mode.
Confirm that pitches between the peaks of the waveform are
equally spaced for 5 seconds or longer.
The pitches are not equally spaced, perform section “2-4-2.
Tape Path Adjustment”.
2-5-2. Tape Path Check
1) Insert a thin video tape such as P5-120MP. Playback the thin
tape. Confirm that there is no clearance or curl of 0.3 mm or
more at the following points: Upper flange of guide No.3, upper flange of guide No. 6, upper and lower flanges of guide
No.7.
2) Confirm that there is no clearance or curl of 0.3 mm or more at
each tape guide when the FF button is pressed from the playback mode to enter the CUE mode, and when the REW button
is pressed from the playback mode to enter the REV mode.
a
b
c
No.6 guide
(TG6)
d
No.7 guide
(TG7) Pinch roller
Drum
Fig. 6-2-9
Capstan
Fig. 6-2-11
6-31
No.1 guide
(TG1)
No.3 guide
(TG3)
DCR-TRV255E/TRV260/TRV265/TRV265E
6-3. VIDEO SECTION ADJUSTMENTS
3-1.
12) PAL Hi8/Standard8 alignment tapes
• For tracking adjustment (WR5-1CP)
Parts code: 8-967-995-07
• For video frequency characteristics adjustment (WR5-7CE)
Parts code: 8-967-995-18
• For checking Standard 8 mode operations
For LP (WR5-4CL)
Parts code: 8-967-995-56
For SP (WR5-5CSP)
Parts code: 8-967-995-47
Note: The following alignment tapes can also be used.
1) WR5-3CL (8-967-995-36)
2) WR5-4CSP (8-967-995-46)
• For checking Hi8 mode operations
For LP (WR5-8CLE)
Parts code: 8-967-995-57
For SP (WR5-8CSE)
Parts code: 8-967-995-48
• For BPF adjustment (WR5-11CS)
Parts code: 8-967-995-76
13) Adjustment remote commander (J-6082-053-B)
14) CPC jig connector (J-6082-539-A)
15) I/F unit for LANC control (J-6082-521-A)
PREPARATIONS BEFORE ADJUSTMENTS
Use the following measuring instruments for video section adjustments.
Note: NTSC model: DCR-TRV260/TRV265
PAL model: DCR-TRV255E/TRV265E
3-1-1. Equipment to Required
1) TV monitor
2) Oscilloscope (dual-phenomenon, band width above 30 MHz
with delay mode) (Unless specified otherwise, use a 10 : 1
probe)
3) Frequency counter
4) Digital voltmeter
5) Audio level meter
6) Audio distortion meter
7) Audio generator
8) Audio attenuator
9) Regulated power supply
10) Digital8 alignment tapes
• SW/OL standard (WR5-2D)
Parts code: 8-967-993-22
• Audio operation check for NTSC (WR5-3ND)
Parts code: 8-967-993-32
• System operation check for NTSC (WR5-5ND)
Parts code: 8-967-993-42
• Audio operation check for PAL (WR5-3CD)
Parts code: 8-967-993-37
• System operation check for PAL (WR5-5CD)
Parts code: 8-967-993-47
11) NTSC Hi8/Standard8 alignment tapes
• For tracking adjustment (WR5-1NP)
Parts code: 8-967-995-02
• For video frequency characteristics adjustment (WR5-7NE)
Parts code: 8-967-995-13
• For checking Standard 8 mode operations
For LP (WR5-4NL)
Parts code: 8-967-995-51
For SP (WR5-5NSP)
Parts code: 8-967-995-42
Note: The following alignment tapes can also be used.
WR5-4NSP (8-967-995-41)
• For checking Hi8 mode operations
For LP (WR5-8NLE)
Parts code: 8-967-995-52
For SP (WR5-8NSE)
Parts code: 8-967-995-43
• For BPF adjustment (WR5-11NS)
Parts code: 8-967-995-71
6-32
DCR-TRV255E/TRV260/TRV265/TRV265E
3-1-2. Precautions on Adjusting
This set is adjusted in two modes, VTR mode and CAMERA mode.
3-1-3. Adjusting Connectors
Some of the adjusting points of the video section are concentrated
at VC-344 board CN1011. Connect the measuring instruments via
I/F unit for LANC control (J-6082-521-A) and CPC jig connector
(J-6082-539-A).
The following table shows the pin No. and signal name of CN1011.
Pin No.
Signal Name
Pin No.
The following table lists the test point of I/F unit of for LANC
control.
Pin No.
Signal Name
EVF VG
PB RF (MON)
1
EEP SCK
9
RF MON
2
FRRV
10
REG GND
3
N. C.
11
LANC OUT
4
N. C.
12
LANC IN
Pin No.
15
14
9
3
Signal Name
BL
BL 4.75
BPF MONI
6, 8, 10 GND
TMS
5
RF SWP
13
XLANC POWER ON
5
6
REG GND
14
EEP SO
4
7
N. C.
15
EEP SI
8
REG GND
16
XCS EEP
Signal Name
EVF VCO
7
REC RF (RF IN)
TDI
TDO
SWP
TCK
CAP FG
2
IR VIDEO
Note: Pin No. are those of CN1011.
Table 6-3-2
Table 6-3-1
3-1-4. Connecting the Equipment
Connect the measuring instruments as shown in Fig. 6-3-1 and
perform the adjustments.
Connecting the TV Monitor and Adjustment Remote Commander
Note: Use either the AC power adaptor or the InfoLITHIUM battery as the power supply of I/F unit for LANC control.
CN1011
1
16
A/V OUT jack
CPC lid
Audio R (red)
Screw (M2)
Audio L (white)
TV monitor
L serices Info
LITHIUM battery (7.2Vdc)
Video (yellow)
AC adaptor
AC IN
AC adaptor
Conductor side
LANC jack
Adjustment
remote commander (RM-95)
CPC jig connector
(J-6082-539-A)
I/F unit for LANC control
(J-6082-521-A)
Fig. 6-3-1
6-33
AC IN
DCR-TRV255E/TRV260/TRV265/TRV265E
3-1-5. Alignment Tape
The following table lists alignment tapes which are available.
Use the tape specified in the signal column for each adjustment. If
the type of tape to be used for checking operations is not specified, use whichever type.
Digital8 alignment tape
Name
Usage
SW/OL standard (WR5-2D) Switching position adjustment
Audio operation check
(WR5-3ND (NTSC),
WR5-3CD (PAL))
Audio system adjustment
System operation check
(WR5-5ND (NTSC),
WR5-5CD (PAL))
Operation check
Hi8/Standard8 alignment tape
Name
Recording
mode
Tape
type
Tape
speed
Tracking
(WR5-1NP (NTSC), WR5-1CP (PAL))
Standard8
MP
SP
Video frequency characteristics
(WR5-7NE (NTSC), WR5-7CE(PAL))
Hi8
ME
SP (NTSC)
LP (PAL)
Operation check
(WR5-5NSP (NTSC), WR5-5CSP (PAL))
Standard8
MP
SP
Operation check
(WR5-8NSE (NTSC), WR5-8CSE (PAL))
Hi8
ME
SP
Operation check
(WR5-4NL (NTSC), WR5-4CL (PAL))
Standard8
MP
LP
Operation check
(WR5-8NLE (NTSC), WR5-8CLE (PAL)
Hi8
ME
LP
AFM stereo operation check
WR5-9NS(NTSC), WR5-9CS(PAL)
Standard8
MP
SP
AFM stereo Operation check
BPF adjustment
WR5-11NS(NTSC), WR5-11CS(PAL)
Standard8
MP
SP
BPF adjustment
Usage
Tape path adjustment, Switching position
adjustment
Frequency characteristics adjustment
Operation check
Tape type
ME ........... Particle type metal tape
MP ........... Evaporated type metal tape
Table 6-3-3
6-34
DCR-TRV255E/TRV260/TRV265/TRV265E
Fig. 6-3-2 Shows the color bar signals recorded on the alignment
tape.
Note: Measure using the VIDEO terminal (Terminated at 75 Ω).
For NTSC model
Blue
Red
Magenta
Green
(75%)
1V
Cyan
Burst signal
Yellow
0.714 V
White
Cyan
Green
Magenta
Red
Blue
White (75%)
Yellow
White (100%)
0.286 V
0.286 V
Q
Q
I
Black
I
White
(100%)
Horizontal sync signal
Color bar signal waveform
Color bar pattern
(100%)
0.3 V
Burst signal
Horizontal sync signal
Color bar signal waveform
Color bar pattern
Fig. 6-3-2 Color Bar Signal of the Alignment Tape
3-1-6. Input/output Level and Impedance
Video input/output
Phono jack, 1 Vp-p, 75 Ω, unbalanced, sync negative
S video input/output
4-pin mini DIN
Luminance signal:
1 Vp-p, 75 Ω, unbalanced, sync negative
Chrominance signal:
0.286 Vp-p, 75 Ω, unbalanced (NTSC)
0.300 Vp-p, 75 Ω, unbalanced (PAL)
Audio input/output
Phono jack:
Input: –7.5 dBs, input impedance more than 47 kΩ
Output: –7.5 dBs, (at load impedance 47 kΩ), output impedance less than 2.2 kΩ
6-35
Black
Blue
Red
Magenta
Green
Cyan
0.3 V
Yellow
White
0.7 V
1V
Magenta
Red
Blue
White (100%)
Yellow
Cyan
Green
For PAL model
DCR-TRV255E/TRV260/TRV265/TRV265E
3-2.
SYSTEM CONTROL SYSTEM ADJUSTMENTS
D1 (decimal)
D2 (decimal)
H1 (hexadecimal)
(Service model code)
00001 to 65535
D1
FE
65536 to 131071
D1 – 65536
FE
131072 to196607
D1 – 131072
FE
196608 to 262143 D1 – 196608
FE
2. Node Unique ID No. Input
Note 1: Perform “2-2. Input of Serial No.” if the data on page C
has been cleared and the node unique ID No. is not found.
Note 2: Check that the data of page: 0, address: 10 is “00”.
262144 to 327679 D1 – 262144
FE
327680 to 393215 D1 – 327680
FE
393216 to 458751 D1 – 393216
FE
458752 to 524287 D1 – 458752
FE
2-1. Input of Company ID
Write the company ID to the EEPROM (nonvolatile memory).
524288 to 589823 D1 – 524288
FE
1. Initialization of 8, A, C, D, E, F, 1C, 1F Page Data
If the 8, A, C, D, E, F, 1C, 1F page data is erased due to some
reason, perform “1-2. INITIALIZATION OF 8, A, C, D, E, F, 1C,
1F PAGE DATA ”, of “6-1. CAMERA SECTION ADJUSTMENTS”
589824 to 655359 D1 – 589824
FE
Page
C
655360 to 720895 D1 – 655360
FE
Address
E0, E1, E2, E3, E4
720896 to 786431 D1 – 720896
FE
786432 to 851967 D1 – 786432
FE
851968 to 917503 D1 – 851968
FE
917504 to 983039 D1 – 917504
FE
983040 to 999999 D1 – 983040
FE
Input method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: C, and enter the following data.
Note 3: Each time the data is set, press the PAUSE button on the
adjusting remote commander.
Table 6-3-4
Address
Data
E0
08
E1
00
E2
46
E3
01
E4
02
4) Enter H1 to address: E5 on page: C.
Example: If H1 = FE,
select page: C, address: E5, and set data: FE, then press the
PAUSE button.
5) From Table 6-3-5, obtain the maximum decimal number less
than D2, and it is assumed to be D3.
Example: If D2 = 12345.
D3 = 12288
6) From Table 6-3-5, obtain a hexadecimal number that corresponds to D3, and it is assumed to be H3.
Example: If D3 = 12288,
H3 = 3000
7) Caluculate D 4 using following equations (decimal
caluculation). (0 D4 225)
D4 = D 2 – D 3
Example: If D2 = 12345 and D3 = 12288,
D4 = 12345 – 12288 = 57
8) Convert D4 into a hexadecimal number to obtain H4. (See Table
6-4-1 “Hexadecimal - decimal conversion table” in 6-4. Service Mode)
Example: If D4 = 57,
H4 = 39
9) Enter higher two digits of H3 to address: E6 on page: C.
Example: If H3 = 3000,
select page: C, address: E6, and set data: 30, then press the
PAUSE button.
10) Enter H4 to address: E7 on page: C.
Example: If H4 = 39,
select page: C, address: E7, and set data: 39, then press the
PAUSE button.
11) Select page: 0, address: 01, and set data: 00.
3) Select page: 0, address: 01, and set data: 00.
2-2. Input of Serial No.
Write the serial No. and model code to the EEPROM (nonvolatile memory).
In writing the serial No., a decimal number should be converted
into a hexadecimal number.
Page
C
Address
E5, E6, E7
1) Select page: 0, address: 01, and set data: 01.
2) Read the serial No. from the model name label, and it is assumed to be D1.
Example: If serial No. is “77881”,
D1 = 77881
3) From Table 6-3-4, obtain D2 and H1 that correspond to D1.
Example: If D1 = 77881,
D2 = D1 – 65536 = 12345
H1 = FE
6-36
DCR-TRV255E/TRV260/TRV265/TRV265E
D3
0
H3
0000
D3
8192
H3
2000
D3
16384
H3
4000
D3
24576
H3
6000
D3
32768
H3
8000
D3
40960
H3
A000
D3
49152
H3
C000
D3
57344
H3
E000
256
512
0100
0200
8448
8704
2100
2200
16640
16896
4100
4200
24832
25088
6100
6200
33024
33280
8100
8200
41216
41472
A100
A200
49408
49664
C100
C200
57600
57856
E100
E200
768
1024
0300
0400
8960
9216
2300
2400
17152
17408
4300
4400
25344
25600
6300
6400
33536
33792
8300
8400
41728
41984
A300
A400
49920
50176
C300
C400
58112
58368
E300
E400
1280
1536
0500
0600
9472
9728
2500
2600
17664
17920
4500
4600
25856
26112
6500
6600
34048
34304
8500
8600
42240
42496
A500
A600
50432
50688
C500
C600
58624
58880
E500
E600
1792
2048
0700
0800
9984
10240
2700
2800
18176
18432
4700
4800
26368
26624
6700
6800
34560
34816
8700
8800
42752
43008
A700
A800
50944
51200
C700
C800
59136
59392
E700
E800
2304
2560
0900
0A00
10496
10752
2900
2A00
18688
18944
4900
4A00
26880
27136
6900
6A00
35072
35328
8900
8A00
43264 A900 51456 C900 59648
43520 AA00 51712 CA00 59904
E900
EA00
2816
3072
0B00
0C00
11008
11264
2B00
2C00
19200
19456
4B00
4C00
27392
27648
6B00
6C00
35584
35840
8B00
8C00
43776 AB00 51968
44032 AC00 52224
60160
60416
EB00
EC00
3328
3584
0D00
0E00
11520
11776
2D00
2E00
19712
19968
4D00
4E00
27904
28160
6D00
6E00
36096
36352
8D00
8E00
44288 AD00 52480 CD00 60672
44544 AE00 52736 CE00 60928
ED00
EE00
3840
4096
0F00
1000
12032
12288
2F00
3000
20224
20480
4F00
5000
28416
28672
6F00
7000
36608
36864
8F00
9000
44800
45056
AF00
B000
52992
53248
CF00
D000
61184
61440
EF00
F000
4352
4608
1100
1200
12544
12800
3100
3200
20736
20992
5100
5200
28928
29184
7100
7200
37120
37376
9100
9200
45312
45568
B100
B200
53504
53760
D100
D200
61696
61952
F100
F200
4864
5120
1300
1400
13056
13312
3300
3400
21248
21504
5300
5400
29440
29696
7300
7400
37632
37888
9300
9400
45824
46080
B300
B400
54016
54272
D300
D400
62208
62464
F300
F400
5376
5632
1500
1600
13568
13824
3500
3600
21760
22016
5500
5600
29952
30208
7500
7600
38144
38400
9500
9600
46336
46592
B500
B600
54528
54784
D500
D600
62720
62976
F500
F600
5888
6144
6400
1700
1800
1900
14080
14336
14592
3700
3800
3900
22272
22528
22784
5700
5800
5900
30464
30720
30976
7700
7800
7900
38656
38912
39168
9700
9800
9900
46848
47104
47360
B700
B800
B900
55040
55296
55552
D700
D800
D900
63232
63488
63744
F700
F800
F900
6656
6912
1A00
1B00
14848
15104
3A00
3B00
23040
23296
5A00
5B00
31232
31488
7A00
7B00
39424
39680
9A00
9B00
47616
47872
BA00
BB00
55808 DA00 64000
56064 DB00 64256
FA00
FB00
7168
7424
1C00
1D00
15360
15616
3C00
3D00
23552
23808
5C00
5D00
31744
32000
7C00
7D00
39936
40192
9C00
9D00
48128 BC00 56320 DC00 64512
48384 BD00 56576 DD00 64768
FC00
FD00
7680
7936
1E00
1F00
15872
16128
3E00
3F00
24064
24320
5E00
5F00
32256
32512
7E00
7F00
40448
40704
9E00
9F00
48640
48896
FE00
FF00
Note: D3: Decimal
H3: Hexadecimal
Table 6-3-5
6-37
BE00
BF00
56832
57088
CB00
CC00
DE00
DF00
65024
65280
DCR-TRV255E/TRV260/TRV265/TRV265E
3-3.
2. Switching Position Adjustment (VC-344 Board)
SERVO AND RF SYSTEM ADJUSTMENTS
Before perform the servo and RF system adjustments, check that
the specified values of “27MHz Origin Oscillation Adjustment”
of “VIDEO SYSTEM ADJUSTMENTS” is satisfied.
Check that the data of page: 0, address: 10 is “00”.
If not, select page: 0, address: 10, and set the data “00”.
RadarW
To obtain normal playback waveform output, adjust the switching
position.
Mode
Adjusting procedure:
1. CAP FG/REEL FG duty adjustment
2. Switching position adjustment
3. SD error rate check
1. CAP FG/REEL FG Duty Adjustment (VC-344 Board)
RadarW
VTR playback (PLAY/EDIT mode)
Signal
SW/OL standard (WR5-2D)
Measurement Point
Displayed data of page: 3, address: 03
Measuring Instrument
Adjusting remote commander
Adjustment Page
C
Adjustment Address
10, 11, 12, 13
Specified value
The data of page: 3, address: 03 is “00”
Note 1: Check that the data of page: 0, address: 10 is “00”.
Set the CAP FG signal duty cycle to 50% to establish an appropriate capstan servo. If deviated, the uneven rotation of capstan and
noise can occur in the LP mode.
Compensates the dispersion of the hall elements.
Adjusting method:
Order Page Address Data
Procedure
Insert the SW/OL standard
tape and enter the VTR stop
mode.
Mode
VTR stop (PLAY/EDIT mode)
Signal
No signal
1
Measurement Point
Displayed data of page: 3, address:
03
2
0
01
01
Measuring Instrument
Adjusting remote commander
3
C
10
EE
Adjustment Page
C
4
3
21
Adjustment Address
16, 17, 2F
5
3
01
The data of page: 3, address: 03 is
“00”
6
3
02
Check the data changes to “00”.
7
3
03
Check the data is “00”.
(Note 3, 4)
8
0
01
Specified value
0D
Note 1: Check that the data of page: 0, address: 10 is “00”.
Adjusting method:
Order Page Address Data
2
0
01
01
3
3
01
1E
4
3
02
Check the data changes to
“00”.
5
3
03
Check the data is “00”.
(Note 2)
6
0
01
Press PAUSE button.
00
Note 2: If the data is “72”, the tape top being played. After playing
the tape for 1 to 2 seconds, stop it, perform step 5 and higher.
If the data is “62”, the tape end being played. After rewind
the tape, perform step 5 and higher.
Note 3: If the data is not “00”, select page: C, address: 21 and
take a note of the data. Set data: 10, press the PAUSE
button, then perform the adjustment again.
When the data does not become “00” even if the adjustment has been performed again, set back the data on page:
C, address: 21.
Note 4: If bit0 of the data is “1”, the EVEN channel is defective.
If bit1 of the data is “1”, the ODD channel is defective.
Contents of the defect is see written into page: C, address: 10 and 12. See following table.
(For the bit values, refer to “6-4. SERVICE MODE”,
“4-3. 3. Bit Value Discrimination”.)
If bit3 of the data is “1”, the tape end being played. After
rewinding the tape, perform the adjustment again.
Procedure
Close the cassette compartment without inserting
cassette.
1
Press PAUSE button.
Check the data is “02”. (Note 2)
Press PAUSE button.
00
Note 2: If the data is other value, adjustment has errors.
For the error contents, see the following table.
Data
Error contents
02, 03, 06, 07
T REEL is defective
08, 09, 0C, 0D
S REEL is defective
Data of page: C,
0A, 0B, 0E, 0F,
T REEL and S REEL are defective
address: 10
81
CAP FG duty adjustment has error
EE
Writing into EEP ROM (IC4502) is
defective
E8
Adjustment data is out of range
E7
No data is returned from IC3301
When the EVEN channel is defective
Contents of defect
When the ODD channel is defective
6-38
Data of page: C,
address: 12
Contents of defect
E8
Adjustment data is out of range
E7
No data is returned from IC3301
DCR-TRV255E/TRV260/TRV265/TRV265E
3. SD Error Rate Check (LP) (VC-344 Board) RadarW
Checking the video error rate in LP mode, adjust the filter tap
coefficient of IC3301.
Mode
VTR playback (PLAY/EDIT mode)
Signal
Recorded signal at “Preparations
before adjustments”
Measurement Point
Displayed data of page: 3, address:
03
Measuring Instrument
Adjusting remote commander
Adjustment Page
1C (Note 1)
Adjustment Address
B3 to C8
Specified value
The data of page: 3, address: 03 is
“00”
Note 1: If reading/writing data on page 1C, set data: 01 to page:
0, address: 10, and then select page C. By this data setting, the page C can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2: Use a Hi8 MP tape.
Switch setting:
1) REC MODE (Menu display) .............................................. LP
Preparations before adjustment:
1) Set the camcoder to CAMERA mode (LP mode).
2) Record camera signal for a minute, and rewind tape.
Adjusting method:
Order Page Address Data
1
0
01
Procedure
01
Playback the recorded signal
at “Preparations before
adjustments”.
2
3
3
01
40
Press PAUSE button.
4
3
02
Check the data changes to
“00”.
5
3
03
Check the data is “00”.
(Note 3)
6
0
01
00
Note 3: If the data is other value, adjustment has errors.
For the error contents, see the following table.
Data
Error contents
01
Error rate of the EVEN channel exceeds the
specified value
02
Error rate of the ODD channel exceeds the
specified value
03
Error rate of the EVEN and ODD channels exceeds
the specified value
6-39
DCR-TRV255E/TRV260/TRV265/TRV265E
3-4.
2.
VIDEO SYSTEM ADJUSTMENTS
Before perform the video system adjustments, check that the data
of page: 0, address: 10 is “00”.
If not, select page: 0, address: 10, and set data “00”
Video system adjustments must be performed in the following order.
Adjusting procedure:
1. 27 MHz origin oscillation adjustment
2. S VIDEO OUT Y level adjustment
3. S VIDEO OUT C level adjustment
4. VIDEO OUT level check
CAMERA
Subject
Arbitrary
Measurement Point
Y signal terminal of
S VIDEO jack (75 Ω terminated)
Measuring Instrument
Oscilloscope
Adjustment Page
C
Adjustment Address
25
Specified value
A = 1000 ± 20 mVp-p
Adjusting method:
Order Page Address Data
Arbitrary
Measurement Point
Pin qs of IC1501
Measuring Instrument
Frequency counter
Adjustment Page
F
Adjustment Address
10
f = 13500000 ± 68 Hz
Specified value
Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: Refer to “2. DISASSEMBLY”, when opening the VC344 board.
Adjusting method:
Order Page Address Data
0
01
2
F
3
F
10
4
0
01
Procedure
1
0
01
01
2
8
A0
3
3
0C
4
C
25
5
C
25
Press PAUSE button.
Set the bit value of bit3 is
“0”, and press PAUSE
button. (Note 2)
Set the bit value of bit3 is
“1”, and press PAUSE
button. (Note 2)
CAREMA
Subject
1
Mode
Note 1: Check that the data of page: 0, address: 10 is “00”.
1. 27 MHz Origin Oscillation Adjustment
(VC-344 Board)
Set the frequency of the clock for synchronization.
If deviated, the synchronization will be disrupted and the color
will become inconsistent.
Mode
S VIDEO OUT Y Level Adjustment (VC-344 Board)
02
Press PAUSE button.
Change the data and set the Y
signal level (A) to the
specified value.
6
8
A0
7
3
0C
00
8
0
01
00
Press PAUSE button.
Note 2: For the bit values, refer to “6-4. SERVICE MODE”, “43. 3. Bit Value Discrimination”.
Procedure
01
Center of luminance line
Change the data and set the
frequency (f) to the specified
value.
10
Press PAUSE button.
A
00
VC-344 BOARD (SIDE B)
H
Measurement
Point
24 13
Fig. 6-3-4
12
25
36
1
37 48
IC1501
Fig. 6-3-3
6-40
DCR-TRV255E/TRV260/TRV265/TRV265E
3.
S VIDEO OUT C Level Adjustment (VC-344 Board)
H
Mode
CAMERA
Subject
Arbitrary
Measurement Point
Chroma signal terminal of
S VIDEO jack (75 Ω terminated)
External trigger: Y signal terminal of
S VIDEO jack (75 Ω terminated)
Measuring Instrument
Oscilloscope
Adjustment Page
C
Adjustment Address
26, 27
Specified value
Cr level: A = 714 ± 14 mVp-p (NTSC)
A = 700 ± 14 mVp-p (PAL)
Cb level:B = 714 ± 14 mVp-p (NTSC)
B = 700 ± 14 mVp-p (PAL)
Burst level: C = 286 ± 6 mVp-p (NTSC)
C = 300 ± 6 mVp-p (PAL)
C
A
0.28 µsec (NTSC)
0.23 µsec (PAL)
Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: NTSC model: DCR-TRV260/TRV265
PAL model: DCR-TRV255E/TRV265E
1
0
01
2
8
A0
3
3
0C
Procedure
01
Set the bit value of bit 3 to “1”,
and press PAUSE button.
(Note 3)
02
Press PAUSE button.
4
C
26
Change the data and set the
Cr signal level (A) to the
specified value.
5
C
26
Press PAUSE button.
6
C
27
Change the data and set the
Cb signal level (B) to the
specified value.
7
C
27
Press PAUSE button.
Check the burst signal (C) to
the specified value.
8
Set the bit value of bit 3 to “0”,
and press PAUSE button.
(Note 3)
9
8
A0
10
3
0C
00
11
0
01
00
0.28 µsec (NTSC)
0.23 µsec (PAL)
Fig. 6-3-5
Adjusting method:
Order Page Address Data
B
Press PAUSE button.
Note 3: For the bit values, refer to “6-4. SERVICE MODE”, “43. 3. Bit Value Discrimination”.
6-41
DCR-TRV255E/TRV260/TRV265/TRV265E
4. VIDEO OUT Level Check (VC-344 Board)
Mode
CAMERA
Subject
Arbitrary
Measurement Point
Video terminal of A/V jack
(75 Ω terminated)
Measuring Instrument
Oscilloscope
Specified value
Sync level:
A = 286 ± 18 mVp-p (NTSC)
A = 300 ± 18 mVp-p (PAL)
Burst level:
B = 286 ± 18 mVp-p (NTSC)
B = 300 ± 18 mVp-p (PAL)
Note: NTSC model: DCR-TRV260/TRV265
PAL model: DCR-TRV255E/TRV265E
Checking method:
Order Page Address Data
Procedure
1
Check that the SYNC level
(A) satisfies the specified
value.
2
Check that the burst level (B)
satisfies the specified value.
B
A
H
Fig. 6-3-6
6-42
DCR-TRV255E/TRV260/TRV265/TRV265E
3-5.
1. Playback Level Check
AUDIO SYSTEM ADJUSTMENTS
[Connecting the measuring instruments for the audio]
Connect the audio system measuring instruments in addition to
the video system measuring instruments as shown in Fig. 6-3-7.
In Playback
VTR playback (PLAY/EDIT mode)
Signal
Digital8 alignment tape:
For audio operation check
(WR5-3CD)
Measurement Point
Audio left or right terminal of A/V
OUT jack
Measuring Instrument
Audio level meter or oscilloscope
Audio level meter
or oscilloscope
Main unit
A/V OUT
jack
Mode
32 kHz mode:
1 kHz, + 3 dBs ± 2 dB
(2.46 Vp-p to 3.89 Vp-p)
Audio (L)
Audio (R)
47 k Ω
47 k Ω: 1-249-437-11
TV monitor
Specified Value
48 kHz mode:
1 kHz, + 3 dBs ± 2 dB
(2.46 Vp-p to 3.89 Vp-p)
44.1 kHz mode (EMP OFF) :
7.35 kHz, + 2 dBs ± 2 dB
(2.19 Vp-p to 3.47 Vp-p)
44.1 kHz mode (EMP ON) :
7.35 kHz, – 3.8 dBs to – 1.2dBs
(1.4 Vp-p to 1.9 Vp-p)
Video
Checking method:
1) Check that the playback signal level is the specified value.
Fig. 6-3-7
6-43
DCR-TRV255E/TRV260/TRV265/TRV265E
2. Precautions Upon Using
the Adjustment Remote Commander
Mishandling of the adjustment remote commander may erase the
correct adjustment data at times. To prevent this, it is recommended
that all adjustment data be noted down before beginning adjustments and new adjustment data after each adjustment.
6-4. SERVICE MODE
4-1.
ADJUSTMENT REMOTE COMMANDER
The adjustment remote commander is used for changing the calculation coefficient in signal processing, EVR data, etc. The adjustment remote commander performs bi-directional
communication with the unit using the remote commander signal
line (LANC). The resultant data of this bi-directional communication is written in the non-volatile memory.
1. Using the Adjustment Remote Commander
1) Connect the adjustment remote commander to CN1011 of VC344 board via I/F unit for LANC control (J-6082-521-A) and
CPC jig connector (J-6082-539-A).
2) Set the HOLD switch of the adjustment remote commander to
“HOLD” (SERVICE position). If it has been properly connected, the LCD on the adjustment remote commander will
display as shown in Fig. 6-4-1.
Page
Data
Address
Fig. 6-4-1
3) Operate the adjustment remote commander as follows.
• Changing the page
The page increases when the EDIT SEARCH+ button is
pressed, and decreases when the EDIT SEARCH– button is
pressed. There are altogether 16 pages, from 0 to F.
Hexadecimal
notation
LCD Display
Decimal notation
conversion value
0 1 2 3 4 5 6 7 8 9 A B C D E F
0 1 2 3 4 5 6 7 8 9 A b c d E F
0 1 2 3 4 5 6 7 8 9 101112 1314 15
• Changing the address
The address increases when the FF (M) button is pressed,
and decreases when the REW (m) button is pressed. There
are altogether 256 addresses, from 00 to FF.
• Changing the data (Data setting)
The data increases when the PLAY (N) button is pressed,
and decreases when the STOP (x) button is pressed. There
are altogether 256 data, from 00 to FF.
• Writing the adjustment data
The PAUSE button must be pressed to write the adjustment
data in the nonvolatile memory. (The new adjusting data will
not be recorded in the nonvolatile memory if this step is not
performed)
4) After completing all adjustments, turn off the main power supply (8.4 V) once.
6-44
DCR-TRV255E/TRV260/TRV265/TRV265E
4-2.
DATA PROCESS
The calculation of the DDS display and the adjustment remote
commander display data (hexadecimal notation) are required for
obtaining the adjustment data of some adjustment items. In this
case, after converting the hexadecimal notation to decimal notation, calculate and convert the result to hexadecimal notation, and
use it as the adjustment data. Indicates the hexadecimal-decimal
conversion table.
Hexadecimal-decimal Conversion Table
Lower digit of
hexadecimal
0
1
2
3
2
4
5
6
7
8
9
A
(A)
B
(b)
C
(c)
D
(d)
E
(E)
F
(F)
Upper digit
of hexadecimal
1
0
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
2
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
3
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
4
64
65
66
67
68
69
70
71
72
73
74
77
76
77
78
79
5
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
6
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
7
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
8
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
9
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
A (A)
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
B (b)
176
178
179
180
181
182
183
184
185
186
187
188
189
190
191
C (c)
192
177
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
D (d)
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
E (E)
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
F (F)
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
Note: The characters shown in the parenthesis ( ) shown the display on the adjustment remote commander.
(Example) If the DDS display or the adjustment remote commander shows BD (bd);
Because the upper digit of the adjustment number is B (b), and the lower digit is D (d), the meeting point
“189” of 1 and 2 in the above table is the corresponding decimal number.
Table 6-4-1
6-45
DCR-TRV255E/TRV260/TRV265/TRV265E
4-3.
2. Emergence Memory Address
SERVICE MODE
2-1. C Page Emergence Memory Address
Additional note on adjustment
Note 1: If reading/writing data on page 1C, set data: 01 to page:
0, address: 10, and then select page C. By this data setting, the page 1C can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2: After the completion of the all adjustments, cancel the
service mode by either of the following ways.
1) After data on page: D and 1C is restored, press the
RESET button and unplug the main power supply.
(In this case, date and time and menu setting have
been set by users are canceled. Perform resetting)
2) After data on page: D and 1C is restored, select page:
0, address: 01, and return the data to 00. And when
data on page: 7 is changed, return data to the original
condition.
Page C
Address
1. Setting the Test Mode
Page 1C
Address 09
Data
Function
FF
Normal
00
Test mode
Various emergency prohibitions and releases
Drum emergency, capstan emergency, loading motor
emergency, reel emergency, tape top and end, DEW
detection
Page D
Function
00
Normal
01
Forced camera power ON
02
Forced VTR power ON
03
Forced camera + VTR power ON
Contents
F4
EMG code when first error occurs
F6
Upper: MSW code when shift starts when first error
occurs
Lower: MSW code when first error occurs
F7
Lower: MSW code to be moved when first error
occurs
F8
EMG code when second error occurs
FA
Upper: MSW code when shift starts when second
error occurs
Lower: MSW code when second error occurs
FB
Lower: MSW code to be moved when second error
occurs
FC
EMG code when last error occurs
FE
Upper: MSW code when shift starts when last error
occurs
Lower: MSW code when last error occurs
FF
Lower: MSW code to be moved when last error
occurs
When no error occurs in this unit, data “00” is written in the above
addresses (F4 to FF). when first error occurs in the unit, the data
corresponding to the error is written in the first emergency address (F4 to F7). In the same way, when the second error occurs,
the data corresponding to the error is written in the second emergency address (F8 to FB).
Finally, when the last error occurs, the data corresponding to the
error is written in the last emergency address (FC to FF).
Note: After completing adjustments, be sure to initialize the data
of addresses F4 to FF to “00”.
Address 10
Data
Address F4 to FF
Initializing method:
Order Page Address Data
• Before setting the data , select page: 0, address: 01, and set data:
01.
• For page D and 1C, the data set will be recorded in the nonvolatile memory by pressing the PAUSE button of the adjustment remote commander. In this case, take note that the test
mode will not be exited even when the main power is turned off
(8.4 Vdc).
• After completing adjustments/repairs, be sure to return the data
of this address to 00, and press the PAUSE button of the adjustment remote commander. And select page: 0, address: 01, and
set data: 00.
6-46
1
0
01
01
2
3
01
37
3
3
02
4
0
01
Procedure
Press PAUSE button.
Check the data changes to
“00”.
00
DCR-TRV255E/TRV260/TRV265/TRV265E
2-2. EMG Code (Emergency Code)
Codes corresponding to the errors which occur are written in C
page, addresses F4, F8 and FC. The type of error indicated by the
code are shown in the following table.
Code
Emergency Type
00
No error
10
Loading motor emergency during loading
11
Loading motor emergency during unloading
22
T reel emergency during normal rotation
23
S reel emergency during normal rotation
24
T reel emergency (Short circuit between S reel
terminal and T reel terminal)
30
FG emergency at the start up of the capstan
40
FG emergency at the start up of the drum
42
FG emergency during normal rotation of the drum
6-47
DCR-TRV255E/TRV260/TRV265/TRV265E
2-3.
MSW Codes
• The lower parts of the data of addresses F6, FA and FE represent the MSW codes (mode switch, mechanism position) when
errors occurs.
• The upper parts of the data of addresses F6, FA and FE represent, when the mechanism position is to be moved, the MSW
codes at the start of movement (when moving the loading motor).
• The lower parts of the data of addresses F7, FB and FF represent the MSW codes of the desired movement when the mechanism position is to be moved.
Loading →
← Unloading
EJECT
Mechanism position
USE
BL
TURN
BL
REC/PB
BL
REW
0 1 0 1 = 5
0 1 1 1 = 7
0 0 0 0 = 0
0 1 1 1 = 7
0 1 0 0 = 4
MODE SW A
BL STOP BL
0 1 1 1 = 7
0 1 1 0 = 6
MODE SW B
LOAD
0 1 1 1 = 7
0 0 1 0 = 2
0 1 1 1 = 7
0 0 1 1 = 3
0 1 1 1 = 7
0 0 0 1 = 1
MSB
MODE SW C
BL
LS chassis movement range
Pinch roller is detached
Pinch roller is pressed
Releasing lock of
cassette campartment
Mechanism Position
MSW Code
Contents
EJECT
1
Position at which the cassette compartment lock is released. The mechanism will not move any
further in the unloading direction.
BL
7
BLANC code. Between two codes. The mechanism will not be stopped by this code while it is
operating.
USE
3
EJECT completion position. When the cassette is ejected, the mechanism will stop at this
position.
LOAD
2
Code during loading/unloading. Code that is used while the LS chassis is moving.
STOP
6
Normal stop position. The pinch roller separates, the tension regulator returns, and the brakes of
both reels turn on.
TURN
4
Position at which is used when the pendulum gear swings from S to T or from T to S.
REC/PB
0
PB, REC, CUE, REV, PAUSE, FF positions.
The pinch roller is pressed and tension regulator is on.
REW
5
REW position. REW are carried at this position.
The mechanism will not move any further in the loading direction.
6-48
DCR-TRV255E/TRV260/TRV265/TRV265E
3. Bit Value Discrimination
Bit values must be discriminated using the display data of the adjustment remote commander for the following items. Us the table
below to discriminate if the bit value is “1” or “0”.
Display on the
adjustment
remote
commander
0
1
2
3
4
5
6
7
A
8
9
A (A)
B (b )
C (C )
D (d)
E (E)
B
F (F)
Display on the adjustment remote commander
Address
Page
bit3 to bit0 discrimination
bit7 to bit4 discrimination
(Example) If the remote commander display is “8E”, bit value from
bit 7 to bit 4 can be discriminated from the column A,
and those from bit 3 to bit 0 from column B.
bit3
or
bit7
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
Bit values
bit2
bit1
or
or
bit6
bit5
0
0
0
0
0
1
0
1
1
0
1
0
1
1
1
1
0
0
0
0
0
1
0
1
1
0
1
0
1
1
1
1
4. Switch Check (1)
Page 7
Address 0E
Note: Check that the data of page: 0, address: 10 is “00”.
Bit
Function
When bit value = 1
When bit value = 0
0
POWER SW (SS-5100 block S001)
ON
OFF
1
MODE SW (SS-5100 block S001)
ON
OFF
2
DISP/BATT INFO SW (CF-5100 block S001)
ON
OFF
3
EJECT SW (SS-5100 block S002)
ON
OFF
4
CC DOWN SW (Mechanism chassis)
ON (DOWN)
OFF (UP)
5
PHOTO SW (POTO FREEZE SW)
(SS-5100 block S003)
ON
OFF
6
7
Using method:
1) Select page: 7, address: 0E.
2) By discriminating the bit value of display data, the state of the
switches can be discriminated.
5. Switch Check (2)
Page 7
Address 0C
Note: Check that the data of page: 0, address: 10 is “00”.
Bit
Function
When bit value = 1
When bit value = 0
2
A/V OUT jack (SI-041 board)
Used
Not used
3
S VIDEO jack (SI-041 board)
Used
Not used
Using method:
1) Select page: 7, address: 0C.
2) By discriminating the bit value of display data, the state of the
switch can be discriminated.
6-49
bit0
or
bit4
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
DCR-TRV255E/TRV260/TRV265/TRV265E
6. Switch Check (3)
Page 2
Address 60 to 67
Note: Check that the data of page: 0, address: 10 is “00”.
Using method:
1) Select page: 2, address: 60 to 67.
2) By discriminating the display data, the pressed key can be discriminated.
Address
Data
00 to 0C
0D to 24
25 to 3F
40 to 5D
5E to 81
60
STOP
FF
REW
PLAY
(KEY AD0) (CF-5100 block) (CF-5100 block) (CF-5100 block) (CF-5100 block)
(IC5001 tl)
(S003)
(S007)
(S012)
(S015)
82 to AA
AB to D7
D8 to FF
PANEL
PANEL
EASY
CLOSE
OPEN
(CF-5100 block)
(CF-5100 block) (CF-5100 block)
(S022)
(S023)
(S023)
VIDEO
FADER
FOCUS
BACKLIGHT
LIGHT
(CF-5100 block) (CF-5100 block)
(CF-5100 block)
(CF-5100 block)
(S011)
(S016)
(S019)
(S020)
No key input
END
REC
MENU
VOLUME – VOLUME + EXECUTE
62
SEARCH
(CF-5100 block) (CF-5100 block) (CF-5100 block)
(KEY AD2) (CF-5100 block) (CF-5100 block)
(CF-5100 block)
(S005)
(S009)
(S017)
(S021)
(S024)
(IC5001 ya)
(S013)
No key input
BURN
63
REC
EXPOSURE
TITLE
DVD/VCD
(KEY AD3) (CF-5100 block) (CF-5100 block) (CF-5100 block)
(CF-5100 block)
(IC5001 yg)
(S006)
(S010)
(S014)
(S018)
No key input
PAUSE
61
(KEY AD1) (CF-5100 block)
(S004)
(IC5001 y;)
64
(KEY AD4)
(IC5001 yh)
PHOTO
PANEL
65
(START)
REVERSE
(KEY AD5)
(SS-5100 block) (PR-5100 block)
(IC5001 yj)
(S003)
(S601)
PANEL
NORMAL
(PR-5100 block)
(S601)
66
(KEY AD6)
(IC5001 yk)
START/
67
STOP
(KEY AD7)
(SS-5100 block)
(IC5001 yl)
(S001)
7. LED, Video Light, IR Light Check
Page 7
Address 07
Bit5, Bit6
Note: Check that the data of page: 0, address: 10 is “00”.
Using method:
1) Set the unit to camera mode.
2) Select page: 7, address: 07, and set the bit value of bit5 and bit6 to “1”.
3) Check that all LED are lit, that the IR light is lit, and that the video light is lit.
4) Select page: 7, address: 07, and set the bit value of bit5 and bit6 to “0”.
6-50
DCR-TRV255E/TRV260/TRV265/TRV265E
8. Record of Use Check
Page 7
Address A7 to A9, C8 to CF
Address
Function
Remarks
A7
Drum rotation
Hour
100000th place digit and 10000th place digit of counted time (decimal digit)
A8
counted time
Hour
1000th place digit and 100th place digit of counted time (decimal digit)
A9
(BCD code)
Hour
10th place digit and 1st place digit of counted time (decimal digit)
C8
User initial power
Year
After setting the clock, set the date of power on next
C9
on date
Month
CA
(BCD code)
Day
CB
Final condensation
Year
CC
occurrence date
Month
CD
(BCD code)
Day
CE
Video light
Hour (L)
10th place digit and 1st place digit of counted time (hexadecimal digit)
CF
counted time (Note 4)
Hour (H)
1000th place digit and 100th place digit of counted time (hexadecimal digit)
Using method:
1) The record of use data is displayed at page: 7, addresses: A7 to
A9 and C8 to CF.
Note 1: This data will be kept even if the cabinet (R) assembly
(VC-344 board CN1007 (22P)) is removed.
Note 2: When the drum was replaced, initialize the drum rotation counted time.
Note 3: When replacing the video light, initialize the data of address: CE and CF.
Note 4: Video light counted time is indicated in hexadecimal
notation. Convert hexadecimal numbers to decimals before useing them.
Initializing method of drum rotation counted time:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 7, address: A7, set data: 00, and press the PAUSE
button.
3) Select address: A8 and A9 and set data “00” into them in the
same way as in address: A7.
4) Select page: 0, address: 01, and set data: 00.
6-51
DCR-TRV255E/TRV260/TRV265/TRV265E
9. Record of Self-diagnosis Check
Page 7
Address
Address B0 to C6
Self-diagnosis code
B0
“Repaired by” code (Occurred 1st time) *1
B1
“Block function” code (Occurred 1st time)
B2
“Detailed” code (Occurred 1st time)
B4
“Repaired by” code (Occurred 2nd time) *1
B5
“Block function” code (Occurred 2nd time)
B6
“Detailed” code (Occurred 2nd time)
B8
“Repaired by” code (Occurred 3rd time) *1
B9
“Block function” code (Occurred 3rd time)
BA
“Detailed” code (Occurred 3rd time)
BC
“Repaired by” code (Occurred 4th time) *1
BD
“Block function” code (Occurred 4th time)
BE
“Detailed” code (Occurred 4th time)
C0
“Repaired by” code (Occurred 5th time) *1
C1
“Block function” code (Occurred 5th time)
C2
“Detailed” code (Occurred 5th time)
C4
“Repaired by” code (Occurred the last time) *1
C5
“Block function” code (Occurred the last time)
C6
“Detailed” code (Occurred the last time)
*1 : “01” t “C”, “03” t “E”
Using method:
1) The past self-diagnosis codes are displayed at page: 7, address:
B0 to C6. Refer to “SELF-DIAGNOSIS FUNCTION” for detail of the self-diagnosis code.
Note: This data will be kept even if the cabinet (R) assembly
(VC-344 board CN1007 (22P)) is removed.
6-52
DCR-TRV255E/TRV260/TRV265/TRV265E
FOR CAMERA OPTICAL AXIS ADJUSTMENT
Take a copy of CAMERA OPTICAL AXIS
FRAME with a clear sheet for use.
0
337.5
22.5
8
1
7
292.5
270
67.5
6
2
247.5
112.5
3
5
4
202.5
157.5
180
✄
90
6-53
DCR-TRV255E/TRV260/TRV265/TRV265E
FOR CAMERA COLOR REPRODUCTION ADJUSTMENT
Take a copy of CAMERA COLOR
REPRODUCTION FRAME with a
clear sheet for use.
For NTSC model
R-Y
MG
R
YE
B-Y
B
G
CY
✄
DCR-TRV260/TRV265
For PAL model
R-Y
R
MG
YE
B-Y
B
G
CY
✄
DCR-TRV255E/TRV265E
6-54E
Reverse
987629251.pdf
Revision History
Ver.
Date
1.0
2003.11
History
Official Release
Contents
—
S.M. Rev.
issued
—