VanCryst™ Professional A/V Solutions
CE790
Digital KVM Extender
The CE790 is a IP based KVM Extender with automatic cable detection
(Auto-MDIX) and RS-232 serial functionality that allows access to a
computer system from a remote USB console (USB keyboard, monitor,
and USB mouse) anywhere on the intranet.
The CE790 improves on previous designs by: 1) the addition of an
intuitive On Screen Display (OSD) on both the transmitter and receiver
units for easy setup and operation; 2) working over a standard TCP/
IP LAN via inexpensive Cat 5e cable, allowing point-to-point, point-tomultipoint, and multipoint-to-multipoint administration without the
need for an additional KVM switch; and 3) the addition of an RS-232
port, on both the transmitter and receiver Units – to connect to a serial
terminal for configuration, and serial devices such as touchscreens and
barcode scanners.
* The CE790 can be installed in point to point, point to multipoint and multipoint
to multipoint configurations. Multipoint configurations require a separate
purchase - contact your delear for details.
* In multipoint configurations, the IGMP (Internet Group Management Protocol)
function of your network switches/hubs should be enabled to avoid deterioration
of data throughput. If you do not know how to enable IGMP, please contact your
network administrator.
Specification
Function
Auto
MDIX
Console
Ports
Features
• Remotely access computers on your KVM installation via intranet
• Dual console operation – control your system from both the
transmitter and receiver USB consoles
• OSD (On Screen Display) on both the transmitter and receiver units
• Supports GUI operation1
• No software required – an HTTP server is embedded in both units
• Built-in ASIC for greater reliability and compatibility
• USB Keyboard and USB Mouse Ports
• RS-232 serial ports2 – allows you to connect to a serial terminal for
configuration, or serial devices such as touchscreens and barcode
scanners
• Audio enabled
• USB overcurrent detection and prevention
• High resolution video – up to 1920 x 1080
• Supports widescreen formats
• Ultra-High quality video mode
• Hot pluggable
• Rack mountable
• Firmware upgradable
• Auto-MDIX – automatically detects cable type
Note: 1. The CE790 AP and GUI operation instructions can be downloaded from
the ATEN website (www.aten.com).
2. RS-232 serial ports support Tx/Rx signals only.
ATEN International Co., Ltd.
3F., No.125, Sec. 2, Datong Rd., Sijhih District., New Taipei City 221, Taiwan
Phone: 886-2-8692-6789 Fax: 886-2-8692-6767
www.aten.com E-mail: marketing@aten.com
Connectors
KVM
Ports
Keyboard
Video
Mouse
Speaker
Mic.
Keyboard/
Video /
Mouse
Speaker
Mic.
RS-232
CE790T
CE790R
1 x USB Type A Female (White)
1 x HDB-15 Female (Blue)
1 x USB Type A Female (White)
1 x Mini Stereo Jack Female (Green)
1 x Mini Stereo Jack Female (Pink)
1 x SPHD-17 Female
(Yellow)
1 x Mini Stereo Jack
(Green)
1 x Mini Stereo Jack
(Pink)
N/A
1 x DB-9 Male
(Black)
1 x DC Jack
1 x RJ-45 Female (Black)
1 x Pushbutton
1 x Pushbutton
1 (Green / Orange)
1 (Green / Red)
USB
DC5.3V/6.62W
DC5.3V/6.36W
Up to 1920 x 1080
0–50ºC
-20–60ºC
0–80% RH, Non-condensing
Metal
0.50 kg
0.48 kg
1 x DB-9 Female (Black)
Power
LAN
OSD
Pushbuttons
Select
Status
LEDs
Power
Emulation
Keyboard / Mouse
Power Consumption
Video
Operating Temp.
Environment Storage Temp
Humidity
Housing
Physical
Weight
Dimensions
Properties
(L x W x H)
20.20 x 8.64 x 2.50 cm
* The specifications and pictures are subject to change without notice.
Printed 03/2014 V5.0
© Copyright 2014 ATEN® International Co., Ltd.
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd.
All rights reserved. All other trademarks are the property of their
respective owners.