WMR-7211

WMR-7211
Operations Manual
Wireless Mobile Reader - Base Unit
WMR-7211_MAN_090111
Page 1 of 5
Cypress Suprex WMR-7211
This manual covers the operation and setup of the Cypress Suprex WMR-7211 base unit.
Overview:
The WMR-7000 series of RF Wireless solutions provides a poratble wireless card readers that can interface to most
access control manufacturers panels. In the case of the WMR-7000 series of wireless products optional repeaters /
extenders are also available.
Features:
-- Service mode for setup and configuration.
--“Quiet” protocol to conserve bandwidth and power
-- Field configurable reader formats
-- Multifunction indicator for determining operational status of the unit
-- Auxiliary I/O connections available for Door/Gate/Panel status signaling.
-- Multiplexing of RF bridge providing for additional door/gate on a single RF link.
-- Economical expansion capabilities using Suprex Lynk technology
Electrical Specifications: (Each Unit)
Supply Voltage!
Current!
!
!
!
8-16VDC
500mA
RF Specifications:
2.4GHz frequency
AES Encryption optional
Electrical and Mechanical Specifications
Physical
Temp
Humidity
Power
Data I/O
Page 2 of 5
WMR-7211 - Weatherproof Enclosure
6.75” x 3.75” x 2.00” - 1.0 lb
Storage(-55˚C to + 150˚C)
Operating(-40˚C to +80˚C)
95% (non-condensing)
Input
Unreg Input 8 to 16 VDC* @ 300mA Max
Output
+5VDC @100mA
Interface
Reader -Wiegand, Strobed (Clock & Data),
LED - 0 - 30V
Quick Reference For Typical Connections
WMR-7211 Central Quick Reference
DC
Power
Supply
Ground
+8 to +16 VDC
Diagnostic LED
R1 Input
Controls
Strike on
Remote
Access
Control
Panel
LED In
D1/Data Out
D0/Clock Out
WMR-7211 Mounting Reference
6.845”
3.78”
Page 3 of 5
R1 IN
Cypress Suprex Series - Wiegand Expansion Module
Panel “Central” interface
DC
Power
Supply
+8 to +16 VDC
Ground
EXP(+)
EXP(-)
Access
Control
Panel
LED In
D1/Data Out
D0/Clock Out
8 to 16 VDC In
Ground
485(+)
485(-)
+5 VDC Out
Prog Res 2
Prog Res 1
LED Input
D1/Data/F2F Out
D0/Clock Out
*
Additional
EXP Modules
Page 4 of 5
EXP-1000
Central Unit
WMR-7211
Central
R1 IN
RLY4 N.O.
RLY4 Com
RLY4 N.C.
RLY3 N.O.
RLY3 Com
RLY3 N.C.
RS232 Out
RS232 In
Ground
Aux Out
Relay2 Input
Relay1 Input
R1 Input
Controls
Strike on
Remote
Typical RF installation with repeater
WMR-7100
Obstruction
ACS
WMR-7211
WMR-7511
Typical RF installation - line of sight
ACS
WMR-7211
Typical RF installation expansion modules
WMR-7211(1)
ACS
EXP-1000C (2)
EXP-1000C (3)
Page 5 of 5