HP ProLiant BL620c Generation 7 (G7) Server Blade

QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Overview
HP ProLiant BL620c Generation 7 (G7) Server Blade
1.
2.
3.
4.
5.
6.
Two hot-plug small form factor (SFF) SAS/SATA/SSD bays
Power on/standby button
UID, health, and network adapter LEDs
32 RDIMM slots supporting up to 1.0TB of DDR3-1333
memory (operating up to 1066 MHz)
One USB 2.0 port, one MicroSD high capacity (SDHC) port, and
one TPM 1.2 connector
Three PCIe Gen2 I/O expansion mezzanine slots
7.
8.
9.
10.
Four NC553i 10Gb FlexFabric adapter ports
iLO 3 Management adapter port
HP P410i Smart Array flash cache connector
One or two Intel® Xeon® E7-2800 family processors up to
eight-cores each (below the hard drives)
11. Server release lever
What's New
Support for the HP OneView Software integrated management platform and a HP 8GB USB Enterprise Mainstream Flash Media
Drive Key Kit
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 1
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Standard Features
This document covers the HP ProLiant BL620c G7 server blade only. For more information on the HP BladeSystem c-Class Enclosure
and HP BladeSystem c-Class Interconnects, please see the following:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
NOTE: The c3000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are supported in the
new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
NOTE: The c7000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are supported in the
new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c-Class Interconnect and Mezzanine Components QuickSpecs:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
Processors
Ten-Core Processors
One or more of the
Intel® Xeon® E7-2870 (2.40GHz/10-core/30MB, 6.40GT/s QPI, 130W) Processor
following depending on
NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more details.
model
Intel® Xeon® E7-2860 2.26GHz/10-core/24MB, 6.40GT/s QPI, 130W) Processor
Intel® Xeon® E7-2850 (2.0GHz/10-core/24MB, 6.40GT/s QPI, 130W) Processor
Intel® Xeon® E7-8867L (2.13GHz/10-core/30MB, 6.40GT/s QPI, 105W) Processor
NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more details.
Eight-Core Processors
Intel® Xeon® E7-2830 (2.13GHz/8-core/24MB, 6.40GT/s QPI, 105W) Processor
Intel® Xeon® E7-2820 (2.0GHz/8-core/18MB, 5.86GT/s QPI, 105W) Processor
NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more details.
Six-Core Processors
Intel® Xeon® E7-2803 (1.73GHz/6-core/18MB, 4.80GT/s QPI, 105W) Processor
NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more details.
NOTE: Intel® Xeon® E7-2800/8867L series processors cannot be used to upgrade a ProLiant BL620c G7
server blade with Intel® Xeon® 6500/7500 series processors.
NOTE: All processors within the server must be identical.
NOTE: All servers support one or two processors.
NOTE: The minimum processor configuration is one processor that must be installed in socket CPU1.
NOTE: If upgrading an existing BL620c G7 server to a different processor, the server's ROM must be
flashed to the latest BIOS prior to the upgrade.
NOTE: All processors support Intel® Hyper-threading.
NOTE: All processors support Intel® Turbo Boost Technology except the E7-2803.
Cache Memory
Up to 30MB level 3 cache memory
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 2
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Standard Features
Chipset
Intel® 7500 chipset
Upgradeability
Upgradeable to two processors
NOTE: All processors within the server must be identical.
NOTE: All servers support one or two processors.
NOTE: The minimum processor configuration is one processor that must be installed in socket CPU1.
NOTE: If upgrading an existing BL620c G7 server to a different processor, the server's ROM must be
flashed to the latest BIOS prior to the upgrade.
NOTE: Intel® Xeon® E7-2800/8867L series processors cannot be used to upgrade a ProLiant BL620c G7
server blade with Intel® Xeon® 6500/7500 series processors.
Integrated Manageability HP Integrated Lights-Out 3 (iLO 3)
Memory
Type
Standard
Maximum
DDR3-1333 and DDR3-1066 Registered DIMMs (RDIMM) (operating up to
1066MHz)
32GB (4 x 8GB)
1.0TB (32 x 32GB RDIMMs)
DDR3 memory options part number decoder
NOTE: See the "Memory" section for memory guidelines, installation rules, and additional general
information.
Network Controllers
Four (4) integrated HP NC553i 10Gb FlexFabric adapter ports supporting 10Gb/1Gb autosensing Ethernet,
FCoE, Flex-10, TCP/IP offload engine, hardware-based accelerated iSCSI, and iSCSI boot.
NOTE: Fibre Channel over Ethernet (FCoE) capability requires the use of an HP Virtual Connect FlexFabric
10Gb/24-port Module or HP 10GbE Pass-Thru Module.
NOTE: The Flex-10 capability requires the use of an HP Virtual Connect Flex-10 10Gb Ethernet module or
HP 10GbE Pass-Thru Module.
One (1) 10/100 network adapter port dedicated to iLO 3 Management
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 3
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Standard Features
I/O Expansion Slots
Three (3) mezzanine expansion slots as follows:
Two (2) Type II (25 watts) x8 PCIe Gen2; mezzanine slots 2 and 3 supporting QDR IB, 4Gb and 8Gb FC,
10Gb FlexFabric, 10Gb Flex10, 10GbE, 1GbE, the Smart Array RAID controllers, and the PCI Pass-thru
Expansion card.
Mezzanine slot's 2 ports are routed to interconnect bays 5,6,7,8 (c7000) and 3,4,3,4 (c3000)
Mezzanine slot's 3 ports are routed to interconnect bays 7,8,5,6 (c7000) and 3,4,3,4 (c3000)
One (1) Type I (15 watts) x4 PCIe Gen2; mezzanine slot 1 supporting 4Gb and 8Gb FC, 10Gb
FlexFabric, 10Gb Flex10, 10GbE, and 1GbE
Mezzanine slot's 1 ports are routed to interconnect bays 3,4,3,4 (c7000) and 2,2,2,2 (c3000)
NOTE: HP recommends 10Gb adapters be installed in a x8 PCIe slot for optimal performance.
NOTE: Type II slots accept both Type I or Type II cards. Type I slots accepted Type I cards only.
Storage Controller
Maximum Internal
Storage
One or more of the
following depending
on model
Industry Standard
Compliance
Integrated SAS version 2.0 (6Gb) HP Smart Array P410i Controller with RAID 0 and 1.
NOTE: The P410i is configured with no cache allowing the end user to select the desired option (if cache is
desired in the first place).
NOTE: RAID 0 and 1 are supported on the P410i without the need for a cache option.
P410i 512MB and 1GB flash backed write cache (FBWC) options.
Optional Smart Array RAID mezzanine controllers (with BBWC and FBWC) for connection to external
storage.
NOTE: The server supports up to a combined total of two (2) battery cache options for the P410i and/or
optional Smart Array RAID controllers.
Optional HP D2200sb PCIe Storage Blade for direct attached and shared storage within the c-Class
enclosures.
Hot-plug SAS
2.4TB
2 x 1.2TB drives
Hot-plug SATA
2.0TB
2 x 1.0TB drives
Hot-plug SAS SSD
1.6TB
2 x 800GB drives
Hot-plug SATA SSD
1.6TB
2 x 800GB drives
NOTE: SAS, SATA, and/or SSD drives cannot be mixed within the server.
ACPI 2.0 Compliant
PCI 2.2 Compliant
Microsoft® Logo certifications
USB 2.0
Secure Digital 2.0
TMP 1.2
IEEE (see the NC553i Technical Specifications section)
Advanced Encryption Standard (AES)
Triple Data Encryption Standard (3DES)
SNMP
SSL 2.0
Active Directory v1.0 (Windows 2003)
IPMI 2.0
DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 4
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Standard Features
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Solaris
VMware Server
Citrix XenServer
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, including how to purchase from
HP, please visit our OS Support Site at: http://www.hp.com/go/ossupport
Enclosures
HP offers two different c-Class server blade enclosures to meet your individual needs:
The HP BladeSystem c7000 rack enclosure is 10U high and holds up to 4 HP ProLiant BL680c G7
servers plugged vertically.
The HP BladeSystem c3000 rack enclosure is 6U high and holds up to 2 HP ProLiant BL680c G7
servers plugged horizontally.
Server blades, storage blades, and interconnect modules are all designed to fit into the c7000 and c3000
enclosures.
For additional enclosure information, please see:
http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html
Graphics
Integrated Matrox G200 video standard
1280 x 1024 (32 bpp)
1920 x 1200 (16 bpp)
HP iLO 4 On System Management Memory
16 MB Flash
256 MB DDR 3 with ECC (112 MB after ECC and video)
Resolution Color Depths 1280 x 1024, 16.7M , 64k, 256,16
1024 x 768, 16.7M, 64k, 256, 16
800 x 600, 16.7M, 64k, 256, 16
640 x 480, 16.7M, 64k, 256, 16
Form Factor
Full height, single wide server blade that plugs into the HP BladeSystem c3000 and c7000 enclosures
HP Insight management
software
HP Service Pack for
ProLiant
HP Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM)
version 5 provide a new, comprehensive approach to firmware and system
software maintenance. Together they provide better operating stability and
ensure maximum uptime. The SPP will be updated at a predictable cadence,
typically coinciding with new HP server hardware launches. By enabling
firmware to be updated online and integrating firmware and system software
updates in one operation HP SUM and the SPP offer faster updates of
individual servers and dramatically faster updates of entire BladeSystem
enclosures. Further improving system uptime and stability is the fact that HP
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 5
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Standard Features
provides 12 months of support on each Service Pack for ProLiant.
The user experience around HP SUM and the SPP has been improved in several
ways, starting with the web download. A single web page provides access to a
single download containing both the latest version of HP SUM version 5 and
the latest SPP. Optional smaller subsets with only specific types of servers or
specific operating systems are offered to save on download time. The HP SUM
application has been re-written to provide a more straightforward, intuitive
user interface that guides the user through the steps of discovery, analyses
and update, providing comprehensive information on available updates,
criticality and interdependencies. This information is also available in reports.
By providing the option of multiple local or shared repositories which can be
easily updated from hp.com, HP SUM provides the tools to optimize stability
and consistency throughout the company. While HP SUM and the SPP will
recommend the combinations of firmware and system software that HP has
found to be the best practice, the application gives customers the flexibility to
set their own specific baseline.
The Service Pack for ProLiant has been rigorously tested with specific
attention for interaction between firmware, drivers and agents both within the
server as well as in interaction with the BladeSystem enclosure components
(Onboard Administrator and Virtual Connect). This testing ensures the highest
quality as well as providing the input for HP SUM to deploy updates taking into
account all interdepencies, when determining the correct updates and order of
update deployment.
HP Insight Foundation
The Service Pack for ProLiant (which includes HP SUM 5) can be downloaded
from: www.hp.com/go/spp/download. More information can be found:
http://www.hp.com/go/spp and http://www.hp.com/go/hpsum
Insight Foundation is being baselined at version v8.70 which means the
following:
Its Media Kit (contains 2 SmartStart CDs, the Firmware DVD, and the
Management DVD) will continue to ship with all supported ProLiant G7
or earlier BTO servers until the last supported server is no longer
shipping.
The Media Kit will not be updated past version 8.70.
ProLiant G7 or earlier CTO servers are able to order the Media Kit with
the understanding that the media is not updated. Please check specific
server QuickSpecs for availability of CTO Kit.
PSP and Firmware DVD downloads will be updated through 2Q 2012 at
the HP Insight Foundation Suite for ProLiant downloads tab:
http://www.hp.com/go/foundation
Customers are urged to use the replacement product, HP Service Pack for
ProLiant, instead of Insight Foundation Suite which is found at these location:
www.hp.com/go/spp
www.hp.com/go/spp/download
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 6
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Standard Features
Security
Availability
Intel® AES-NI
Power-on password
Administrator's password
Integrated Lights-Out 3 with:
12 customizable user accounts
SSL encryption
Secure Shell version 2
Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser,
CLP and XML scripting interface
AES and RC4 encryption of video
Disable via a global setting
Keyboard password
External USB port enable/disable
Network server mode
Serial interface control
TPM (Trusted Platform Module) 1.2 option
Memory
HP Memory Quarantine (based on Intel MCA Recovery technology). In conjunction with the operating
system support, allows a server to recover from uncorrectable memory errors which would have
otherwise caused a system crash.
Double Device Data Correction (DDDC). DDDC provides the ability to save a DIMM from being
replaced due to a bad dram device.
Data Bus ECC protection for automatic correction from a single data bit error and detection of
double data error bits.
Advanced ECC/SDDC provides continued memory operation in the event of a single memory device
failure and allows removal of a single DRAM from the memory map if it exhibits a failure and
recovers its data into a new device.
Supports for both x4 and x8 Intel® SDDC.
Demand Scrubbing writes corrected data back to the memory once a correctable error is detected
on a read transaction.
DIMM Address/Control Bus Parity Protection provides a means to detect and protect command and
address errors.
Memory Failover uses a mirrored DIMM once a failed DIMM in a mirrored set is detected.
Memory Mirroring provides a copy of memory stored with dynamic failover in case of failure within
socket (intra-socket) memory mirroring.
The system will operate in non-hemisphere mode when mirroring is enabled.
Rank Sparring (On Line Spare) provides dynamic failover to a spare DIMM rank or spare rank pair
behind the same memory controller. Cannot be enabled concurrently with memory mirroring.
NOTE: HP offers the rank sparing rather than DIMM sparing as rank sparing uses less spare memory
resulting in less overhead.
Failed DIMM Isolation identifies a specific failing DIMM lockstep pair thereby enabling the user to
replace only the failed DIMM pair. Identifies a single DIMM for correctable errors and DIMM pair for
uncorrectable errors.
Virtualization
Intel® VT-x (FlexMigration, FlexPriority, and Extended Page Tables) provides:
Platform control between the VMM and guest OSs for faster, more reliable and secure
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 7
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Standard Features
transfers.
VM migration features that enhance flexibility for failover, load balancing, disaster recovery,
and maintenance.
Intel® VT-x Real Mode & Pause Loop Exiting:
Real Mode allows guests to operate in real mode, removing the performance overhead and
complexity of an emulator.
Pause Loop Exiting provides detection of spin locks in guest software and helps avoid lockholder preemption to reduce overhead and improve performance.
Intel® VT-d (Intel® Virtualization Technology for Directed I/O) enables the VMM to assign specific I/O
devices to specific guest OSs improving security and availability.
Mezzanine options and I/O
Optional dual-port Fibre Channel mezzanine cards for redundant SAN connections.
Optional dual-port InfiniBand mezzanine cards for redundant high performance connections.
Four embedded Ethernet adapter ports for redundant LAN connections.
Multiple mezzanine I/O expansion slots each supported multiple data paths routed to redundant
interconnect modules.
Network Adapter Teaming (Bonding) provides network fault tolerance, transmit load balancing, and
switch-assisted load balancing.
Processor/Chipset
Processor Internal Sensors & Thermal Control protection against over-temperature conditions.
Cache parity/ECC protects cache data from accidental data corruption due to particle hits.
Machine Check Architecture (MCA) detects and captures hardware errors such as system bus, ECC,
parity, cache, other.
Enhanced MCA handling & error logging builds upon the original Machine Check Architecture to:
offers more "banks" and increased "resolution" for reporting errors that cause MCA events and 2)
sets check flags for the OS to poll.
External Bus Error Recovery (ECC) enables automatic correction from a single data bit error and
detection of double data error bits on the memory data bus.
Corrupt Data Containment tags faulty data before it is consumed (often called data poisoning) to
limit the impact to the currently running program and to greatly reduce the need to reset the
system.
On-Die Error Protection protects registers from particle hits.
Storage
Two hot-plug SAS/SATA/SSD drive bays.
Integrated HP Smart Array P410i Controller with RAID 0 and 1 standard
Integrated HP Smart Array P410i Controller upgradeable firmware with recovery ROM capability
HP Smart Array P410i flash backed write cache (FBWC) options to 1GB.
Optional multiple Smart Array RAID mezzanine controllers (with BBWC and FBWC) for direct attach
and shared SAS storage external to the c-Class enclosure.
Optional HP D2200sb Storage Blade for direct attached and shared storage within the c-Class
enclosure.
Intel® QuickPath Interconnect (QPI)
QPI Link Retry restarts as cycle when a failure is detected on the link.
QPI Clock Failover redirects the forwarded clock to one of the two failover clock lanes in the event of
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 8
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Standard Features
a forwarded clock failure.
QPI Self-Healing enables a QPI link to map a failed lane and downshift from full to ½ width (or ½
width to ¼ width) QPI link if there are errors on the link.
QPI Cycle Redundancy Checking (CRC) automatically detects data errors using a checksum of either
8 bits or 16 bits.
QPI Poisoning tags an erroneous packet with a "poisoned bit" on the QPI fabric.
QPI Lane Failover identifies a faulty lane within data paths removing them from operation reducing
command/address errors.
Server Blade Enclosure Infrastructure
Up to 10 hot-plug redundant Active Cool fans per enclosure.
Up to 6 hot-plug high efficiency redundant power supplies per enclosure.
Dual grid power providing redundant rack enclosure power feeds to the enclosure.
Up to eight interconnect modules per enclosure providing four simultaneous redundant fabrics for
FlexFabric, Virtual Connect Ethernet, Fibre Channel, InfiniBand, iSCSI, SAS, etc.
Optional enclosure redundant Onboard Administrator system management module.
Warranty:
This product is covered by a global limited warranty and supported by HP Services and a worldwide
network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available
for three years from date of purchase. Support for software and initial setup is available for 90 days from
date of purchase. Enhancements to warranty services are available through HP Care Pack services or
customized service agreements. Hard drives have either a one year or three year warranty; refer to the
specific hard drive QuickSpecs for details.
NOTE: Server warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. Warranty repairs may
be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories:
1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when
customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy
replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR
parts at no charge. Additional information regarding worldwide limited warranty and technical support is
available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 9
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Optional Features
Fibre Channel Support
Up to three (3) optional 4Gb and/or 8Gb Fibre Channel HBA mezzanine adapters (Brocade, Emulex and
QLogic options).
Compatible SAN
HP ProLiant BL620c G7 server blades are optimized for HP MSA, EVA, and XPHP and are compatible with
select third party SANs. See the blade storage page for more details at
http://h18004.www1.hp.com/products/blades/components/c-class-sans.html.
HP Virtual Connect
HP Virtual Connect is an interconnect option for BladeSystem c-Class that simplifies server connectivity to
data and storage networks, and reduces costs. Unique HP Flex-10 technology makes maximum use of
network bandwidths, provide dynamic tuning and enable extreme flexibility to meet individual server and
infrastructure requirements by allocating up to 4 network connections per server port. Virtual Connect
FlexFabric modules extend those capabilities to allocate one function per port to storage connections. HP
Virtual Connect Enterprise Manager (VCEM) provides server management software with a central console
to administer network connections and workloads for thousands of servers. For more information on
Virtual Connect Enterprise Manager see: www.hp.com/go/vcem. For more information on Virtual Connect
Ethernet, Fibre Channel, Converged Network and management options see:
www.hp.com/go/virtualconnect
HP Virtual Connect
HP Virtual Connect is an interconnect option for BladeSystem c-Class that simplifies server connectivity to
data and storage networks, and reduces costs. Unique HP Flex-10 technology makes maximum use of
network bandwidths, provide dynamic tuning and enable extreme flexibility to meet individual server and
infrastructure requirements by allocating up to 4 network connections per server port. Virtual Connect
FlexFabric modules extend those capabilities to allocate one function per port to storage connections. HP
Virtual Connect Enterprise Manager (VCEM) provides server management software with a central console
to administer network connections and workloads for thousands of servers. For more information on
Virtual Connect Enterprise Manager see: www.hp.com/go/vcem. For more information on Virtual Connect
Ethernet, Fibre Channel, Converged Network and management options see:
www.hp.com/go/virtualconnect
HP Insight management
software
HP Insight Control
HP Matrix Operating
Environment
HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to deploy,
monitor, remote control, and optimize your IT infrastructure through a single,
simple management console. For more information, see
http://www.hp.com/go/insightcontrol.
HP Insight Control includes one year of 24 x 7 HP Software Technical Support
and Update Service ensuring rapid access to HP support staff and proactive
delivery of software updates. For more information about this service, please
visit: http://www.hp.com/services/insight.
The HP Matrix Operating Environment (Matrix OE) for ProLiant and Integrity
servers is an integrated command center that helps you instantly adjust to
dynamic business demands. This advanced infrastructure management
software lets you reduce the cost of common data center tasks by up to 40
percent while keeping pace with your changing business.
The HP Matrix OE includes the automated provisioning, optimization, and
recovery management capabilities for HP CloudSystem Matrix, the ideal
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 10
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Optional Features
platform for private cloud and Infrastructure as a Service (IaaS).
NOTE: For more information, visit: http://www.hp.com/go/matrixoe
HP Integrated Lights-Out
(iLO)
HP OneView
HP Integrated Lights-Out (iLO) simplifies server setup, health monitoring,
power and thermal control, and lights-out remote administration of ProLiant
ML, DL, and BL servers. HP iLO functions without additional software and can
be accessed from any location via a web browser. HP iLO works hand-in-hand
with HP Systems Insight Manager, Insight Control, and Matrix Operating
Environment for ProLiant, helping customers unleash the value of the
ProLiant platform and deliver the highest possible quality of IT service. For
more information, visit: www.hp.com/go/iLO.
The HP OneView architecture combines server, storage, and networking with control of datacenter
environmentals into a single, integrated management platform. Architected to deliver lifecycle
management for the complete Converged Infrastructure, it facilitates collaboration, removes friction,
collapses cycle times, eliminates error-prone work, and accelerates time to value. HP OneView v1.0
combines management of servers and virtual connect with open integration to automate and customize
existing tools and processes. With OneView, you'll work smarter-with greater visibility and control-and
fully capitalize on the benefits of a Converged Infrastructure.
For more information on HP OneView management, see: http://www.hp.com/go/oneview.
High Performance
Clusters
HP Cluster Platforms
HPC Interconnects
HP Insight Cluster
Management Utility
HP Proactive Insight
experience
HP Cluster Platforms are specifically engineered, factory-integrated largescale ProLiant clusters optimized for High Performance Computing, with a
choice of servers, networks and software. Operating system options include
specially priced offerings for Red Hat Enterprise Linux and SUSE Linux
Enterprise Server, as well as Microsoft Windows HPC Server. A Cluster
Platform Configurator simplifies ordering. http://www.hp.com/go/clusters
High Performance Computing (HPC) interconnect technologies are available
for this server as part of the HP Cluster Platform portfolio. These high-speed
InfiniBand and Gigabit interconnects are fully supported by HP when
integrated within an HP cluster. Flexible, validated solutions can be defined
with the help of configuration tools.
http://www.hp.com/techservers/clusters/ucp/index.html
HP Insight Cluster Management Utility (CMU) is an HP-licensed and HPsupported suite of tools that are used for lifecycle management of hyperscale
clusters of Linux ProLiant systems. CMU includes software for the centralized
provisioning, management and monitoring of nodes. CMU makes the
administration of clusters user friendly, efficient, and effective.
http://www.hp.com/go/cmu
Prevent problems with innovative, automated monitoring tools and proactive services. The HP Proactive
Insight experience consist of using Insight Online, Insight Remote Support, and Proactive Care Support
Service as one integrated solution. The Proactive Insight experience provides you with expert advice and
personalized, cloud-based automated IT support, helping to prevent unplanned down time and solve
problems quickly. For more information, visit: www.hp.com/go/proactiveinsightexperience
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 11
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Optional Features
Factory Express Portfolio HP Factory Express offers configuration, customization, integration and deployment services for HP
for Servers and Storage servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services on your specific server model please contact your sales
representative or go to: http://www.hp.com/go/factory-express.
HP Simple Configurator
SCE is a guided self service tool to help sales and non technical people provide customers with initial
configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in
your existing ordering processes. If you require "custom" rack configuration or configuration for products
not available in SCE, please contact HP's Customer Business Center or an Authorized Partner for
assistance. http://www.hp.com/products/configurator
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 12
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Service and Support
Service and Support
HP Technology Services for Industry Standard Servers and BladeSystem
Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who
understands your increasingly complex business technology environment. That's why it makes sense to
team up with the people who know HP infrastructure hardware and software best - the experienced
professionals at HP Services.
Protect your business beyond warranty with HP Care Pack Services
HP Care Pack services offer complete care and support expertise with committed response choices
designed to meet your IT and business needs.
HP Foundation Care services offer scalable reactive support-packages for HP industry-standard servers
and software. You can choose the type and level of service that is most suitable for your IT and business
needs. HP Proactive Care delivers high levels of system availability through proactive service management
and advanced technical response.
Recommended HP Care Pack Services for your HP product
Optimized Care
3-Year HP 6 hour Call to Repair Response, Proactive Care
Combined reactive and proactive support for hardware and software helping optimize your systems and
delivering high levels of availability through proactive service management and advanced technical
response. Hardware problem resolution to return the hardware in operating condition within 6 hours of the
initial service request. A Technical Account Manager, as your single point of contact, will own your call or
issue end to end until resolved.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855EEE.pdf
HP Install c-Class Server Blade Service
This easy-to-buy, easy-to-use HP Care Pack service helps ensure that your new HP hardware is installed
smoothly, efficiently, and with minimal disruption of your IT and business operations.
Standard Care
3-Year HP 24x7 4 hour response, Proactive Care Service
This service gives you combined reactive and proactive support including rapid access to our Advanced
Solution Center to manage and prevent problems and a Technical Support Specialist with a broad level of
technical knowledge that will engage with additional technical expertise as needed from HP's vast global
resources.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855EEE.pdf
HP Install c-Class Server Blade Service
This easy-to-buy, easy-to-use HP Care Pack service helps ensure that your new HP hardware is installed
smoothly, efficiently, and with minimal disruption of your IT and business operations.
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 13
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Service and Support
Related Services
HP Proactive Care Personalized Support - Environmental Option
The Personalized Support option provides an assigned Account Support Manager who can bring best
practices from across the industry plus extra technical skills to your IT team. This option is only available
as an add-on to HP Proactive Care Support.
HP Proactive Select Service
Provides a flexible way to purchase HP best-in-class consultancy and technical services. You can buy
Proactive Select Service Credits when you purchase your hardware and then use the credits over the next
12 months. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENN.pdf
Additional HP Care Pack services can be found at:
http://www.hp.com/go/cpc
Insight Online/Insight
Remote Support
HP Insight Remote Support provides 24 X 7 remote monitoring, proactive notifications, and problem
resolution. This comes at no additional cost with your HP solution. Learn more about Insight Remote
Support http://www.hp.com/go/insightremotesupport and Insight Online
http://www.hp.com/go/insightonline
NOTE: Insight Remote Support is a prerequisite for Proactive Care. All blades within a single HP
BladeSystem enclosure must be at the same service level.
HP Support Center
Personalized online support portal with access to information, tools and experts to support HP business
products. Submit support cases online, chat with HP experts, access support resources or collaborate with
peers. Learn more http://www.hp.com/go/hpsc
HP's Support Center Mobile App allows you to resolve issues yourself or quickly connect to an agent for
live support. Now, you can get access to personalized IT support anywhere, anytime.
HP Insight Remote Support and HP Support Center are available at no additional cost with a HP warranty,
HP Care Pack or HP contractual support agreement.
NOTE: HP Support Center Mobile App is subject to local availability.
Parts and Materials
HP will provide HP-supported replacement parts and materials necessary to maintain the
covered hardware product in operating condition, including parts and materials for available
and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the
maximum usage limitations as set forth in the manufacturer's operating manual, product
quick-specs, or the technical product data sheet will not be provided, repaired, or replaced as
part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by HP due to malfunction.
For more information
To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP sales
representative or HP Authorized ServiceOne Channel Partner. Or visit: www.hp.com/services/bladesystem
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 14
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Pre-Configured Models
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.
HP ProLiant BL620c G7 E7- Processor(s)
2860 1P 32GB-R Server
One of the following
depending on model
643763-B21
HP ProLiant BL620c G7 E72850 1P 32GB-R Server
643764-B21
Cache Memory
Memory
HP ProLiant BL620c G7 E7Network Controllers
2830 1P 32GB-R Server
643765-B21
(1) Intel® Xeon® E7-2860 (2.26GHz/10-core/24MB, 6.40GT/s QPI, 130W)
Processor
(1) Intel® Xeon® E7-2850 (2.0GHz/10-core/24MB, 6.40GT/s QPI, 130W)
Processor
(1) Intel® Xeon® E7-2830 (2.13GHz/8-core/24MB, 6.40GT/s QPI, 105W)
Processor
24MB L3 cache
32GB (4 x 8GB) DDR3-1333 RDIMMs (operating up to 1066MHz)
Hard Drives
Four (4) integrated HP NC553i 10Gb FlexFabric adapter ports supporting
10Gb/1Gb autosensing Ethernet, FCoE, Flex-10, TCP/IP offload engine,
hardware-based accelerated iSCSI, and iSCSI boot
One (1) 10/100 network adapter port dedicated to iLO 3 Management
Integrated SAS version 2.0 (6Gb) HP Smart Array P410i Controller with RAID 0
and 1
NOTE: The P410i is configured with no cache allowing the end user to select
the desired cache option (if cache is desired in the first place).
NOTE: RAID 0 and 1 are supported on the P410i without the need for a cache
option.
Two (2) cache slots for BBWC and/or FBWC battery options.
NOTE: The server supports up to a combined total of two (2) battery cache
options for the P410i and/or optional Smart Array RAID controllers.
No drives included; supports up to two (2) hot-plug SFF SAS/SATA/SSD drives
Internal Storage
SAS: 2.4TB; SATA: 2.0TB; SAS SSD: 1.6TB; SATA SSD: 800GB
Optical Drive
None
Form Factor
Up to 4 blades in the HP BladeSystem c3000 enclosure
Up to 8 blades in the HP BladeSystem c7000 enclosure
Storage Controller
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 15
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on Factory
Integrated Model product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
NOTE: Configure-to-order servers must start with a Factory Integrated Model (CTO) Blade.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
HP Models
HP ProLiant BL620c G7 W Configure-to-order Server
Configurable model ships with:
643786-B21
Four (4) integrated HP NC553i 10Gb FlexFabric adapter ports supporting 10Gb/1Gb
autosensing Ethernet, FCoE, Flex-10, TCP/IP offload engine, hardware-based
accelerated iSCSI, and iSCSI boot
One (1) 10/100 network adapter port dedicated to iLO 3 Management
One (1) Integrated SAS version 2.0 (6Gb) HP Smart Array P410i Controller with RAID 0
and 1
NOTE: The P410i is configured with no cache allowing the end user to select the desired
cache option (if cache is desired in the first place).
NOTE: RAID 0 and 1 are supported on the P410i without the need for a cache option.
Two (2) cache slots for BBWC and/or FBWC battery options.
NOTE: The server supports up to a combined total of two (2) battery cache options for
the P410i and/or optional Smart Array RAID controllers.
Two (2) small form factor hot-plug SAS/SATA/SSD hard drive bays
Three (3) I/O expansion slots
One (1) integrated Lights-Out 3
Integrated USB, MicroSDHC, and TPM connectors
Step 2: Choose Required Options (one of the following from each list unless otherwise
noted):
HP Processors
NOTE: The BL620c G7 supports one or two processors.
NOTE: The minimum processor configuration is one processor that must be installed in
socket CPU1.
NOTE: All processors within the server must be identical.
NOTE: All Configure-to-Order processor kits contain one (1) processor.
NOTE: If two processors are desired, select one xxxxxx-L21 kit and one xxxxxx-B21 kit.
NOTE: Intel® Xeon® E7-2800/8867L series processors cannot be used to upgrade a
ProLiant BL620c G7 server blade with Intel® Xeon® 6500/7500 series processors.
Ten-Core Processors
HP BL620c G7 Intel® Xeon® E7-2870 (2.40GHz/10-core/30MB/130W) FIO Processor Kit
HP BL620c G7 Intel® Xeon® E7-2860 (2.26GHz/10-core/24MB/130W) FIO Processor Kit
HP BL620c G7 Intel® Xeon® E7-2850 (2.0GHz/10-core/24MB/130W) FIO Processor Kit
HP BL620c G7 Intel® Xeon® E7-8867L (2.13GHz/10-core/30MB/105W) FIO Processor Kit
Eight-Core Processors
DA - 13747 Worldwide — Version 35 — December 13, 2013
643749-L21
643751-L21
643753-L21
643761-L21
Page 16
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Configuration Information - Factory Integrated Models
HP Memory
HP BL620c G7 Intel® Xeon® E7-2830 (2.13GHz/8-core/24MB/105W) FIO Processor Kit
HP BL620c G7 Intel® Xeon® E7-2820 (2.0GHz/8-core/18MB/105W) FIO Processor Kit
Six-Core Processors
643755-L21
643757-L21
HP BL620c G7 Intel® Xeon® E7-2803 (1.73GHz/6-core/18MB/105W) FIO Processor Kit
NOTE: All DDR3 memory option kits consist of one RDIMM per kit.
NOTE: See the "Memory" section for memory guidelines, installation rules, and
additional general information.
Registered DIMMs (RDIMMs)
643759-L21
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power
Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 LP
Memory Kit
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7 Memory Kit
HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered CAS-7 LP Memory
Kit
500658-B21
500662-B21
604506-B21
627812-B21
500666-B21
627814-B21
Step 3: Choose Additional Options for Factory Integration
HP Insight Software
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server
FIO License
Converged Infrastructure HP OneView with iLO Advanced - Server hardware required on same purchase order
Management Software
HP OneView for ProLiant DL Server incl 3yr 24x7 Supp FIO Bundle Physical 1 Svr Lic
HP OneView incl 3yr 24x7 Supp Bundle 1 Svr E-LTU
HP OneView for Blade Server incl 3yr 24x7 Supp FIO Bundle Physical 1 Svr Lic
HP OneView for Blade Server incl 3yr 24x7 Supp FIO Bundle 1 Svr E-LTU
C6N36A
E5Y43A
E5Y43AAE
F6Q89A
F6Q89AAE
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional options, including server blade enclosures interconnect and mezzanine options and power subsystem options;
please see the Core Options and Additional sections below and the following:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
NOTE: The c3000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are supported in the
new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
NOTE: The c7000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are supported in the
new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c-Class Interconnect and Mezzanine Components QuickSpecs:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 17
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Core Options
NOTE: For additional "Core Options" and "Additional Options" please see the options sections below.
HP Ethernet Mezzanine
Options
HP Fibre Channel
Mezzanine Options
Gigabit Ethernet Mezzanines
HP NC325m PCI Express Quad Port Gigabit Server Adapter
HP NC360m Dual Port 1GbE BL-c Adapter
HP NC364m Quad Port 1GbE BL-c Adapter
HP NC382m PCI Express Dual Port Multifunction Gigabit Server Adapter
10 Gigabit Ethernet Mezzanines
NOTE: A 10 Gigabit Ethernet adapter is required for each server blade connecting to a
10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 2-4 (HP
BladeSystem c3000 Enclosure).
NOTE: Each 10 Gigabit Ethernet adapter requires a minimum of 2GB of server memory.
NOTE: A 10 Gigabit Ethernet adapter will down speed to 1Gb if paired with a 1GbE
interconnect.
NOTE: HP recommends 10Gb adapters be installed in an x8 PCIe slot for optimal
performance.
HP NC532m Dual Port 10GbE Multifunction BL-c Adapter
HP NC542m Dual Port Flex-10 10GbE BL-c Adapter
HP NC552m 10Gb 2-port Flex-10 Ethernet Adapter
HP NC553m 10Gb 2-port FlexFabric Adapter
416585-B21
445978-B21
447883-B21
453246-B21
467799-B21
539857-B21
610609-B21
613431-B21
4Gb Fibre Channel mezzanine adapters
Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
8Gb Fibre Channel mezzanine adapters
403621-B21
403619-B21
Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
HP BLc Brocade 804 8Gb Fibre Channel Host Bus Adapter
456972-B21
451871-B21
590647-B21
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 18
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Core Options
HP Processors
HP Memory
NOTE: The BL620c G7 supports one or two processors.
NOTE: The minimum processor configuration is one processor that must be installed in
socket CPU1.
NOTE: All processors within the server must be identical.
NOTE: All -B21 processor kits listed below contain one (1) processor.
NOTE: If upgrading an existing BL620c G7 server to a different processor, the server's
ROM must be flashed to the latest BIOS prior to the upgrade.
NOTE: Intel® Xeon® E7-2800/8867L series processors cannot be used to upgrade a
ProLiant BL620c G7 server blade with Intel® Xeon® 6500/7500 series processors.
Ten-Core Processors
HP BL620c G7 Intel® Xeon® E7-2870 (2.40GHz/10-core/30MB/130W) Processor Kit
HP BL620c G7 Intel® Xeon® E7-2860 (2.26GHz/10-core/24MB/130W) Processor Kit
HP BL620c G7 Intel® Xeon® E7-2850 (2.0GHz/10-core/24MB/130W) Processor Kit
HP BL620c G7 Intel® Xeon® E7-8867L (2.13GHz/10-core/30MB/105W) Processor Kit
Eight-Core Processors
643749-B21
643751-B21
643753-B21
643761-B21
HP BL620c G7 Intel® Xeon® E7-2830 (2.13GHz/8-core/24MB/105W) Processor Kit
HP BL620c G7 Intel® Xeon® E7-2820 (2.0GHz/8-core/18MB/105W) Processor Kit
Six-Core Processors
643755-B21
643757-B21
HP BL620c G7 Intel® Xeon® E7-2803 (1.73GHz/6-core/18MB/105W) Processor Kit
643759-B21
NOTE: All DDR3 memory option kits consist of one RDIMM per kit.
NOTE: See the "Memory" section for memory guidelines, installation rules, and
additional general information.
Registered DIMMs (RDIMMs)
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power
Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 LP
Memory Kit
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7 Memory Kit
HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered CAS-7 LP Memory
Kit
HP Hard Drives
500658-B21
500662-B21
604506-B21
627812-B21
500666-B21
627814-B21
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller,
firmware, and the server backplane) should operate at the same data transfer rate or
the system bandwidth will be negotiated down to an acceptable level for all
components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
NOTE: Two drives are required for RAID 0 and 1.
NOTE: SAS, SATA, and/or SSD drives cannot be mixed within the server.
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 19
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Core Options
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) Hot Plug Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
718160-B21
693648-B21
619291-B21
581286-B21
581284-B21
627117-B21
507127-B21
512547-B21
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html
(Worldwide)
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
605835-B21
507610-B21
HP 1TB 3G SATA 7.2K rpm SFF (2.5-inch) Hot Plug Midline 1yr Warranty Hard Drive
HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html
(Worldwide)
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Boot Solid State Drives
625609-B21
507750-B21
NOTE: These drives support G7 servers only.
HP 120GB 6G SATA Value Endurance SFF 2.5-in Enterprise Boot 3yr Wty Solid State
Drive
HP 80GB 6G SATA Value Endurance SFF 2.5-in Enterprise Boot 3yr Wty Solid State Drive
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Value Solid State
Drives
728726-B21
734366-B21
NOTE: These drives support G7 servers only.
HP 800GB 6G SATA Value Endurance SFF 2.5-in Enterprise Value 3yr Wty Solid State
Drive
HP 600GB 6G SATA Value Endurance SFF 2.5-in Enterprise Boot 3yr Wty Solid State
Drive
NOTE: This drive supports G7 servers only.
728743-B21
HP 480GB 6G SATA Value Endurance SFF 2.5-in Enterprise Value 3yr Wty Solid State
Drive
HP 300GB 6G SATA Value Endurance SFF 2.5-in Enterprise Boot 3yr Wty Solid State
Drive
NOTE: This drive supports G7 servers only.
728739-B21
HP 240GB 6G SATA Value Endurance SFF 2.5-in Enterprise Value 3yr Wty Solid State
Drive
6G SATA ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
728735-B21
739904-B21
739894-B21
NOTE: These drives support G6 and G7 servers only.
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 20
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Core Options
HP 800GB 6G SATA Mainstream Endurance SFF 2.5-in Enterprise Mainstream 3yr Wty
Solid State Drive
HP 400GB 6G SATA Mainstream Endurance SFF 2.5-in Enterprise Mainstream 3yr Wty
Solid State Drive
HP 200GB 6G SATA Mainstream Endurance SFF 2.5-in Enterprise Mainstream 3yr Wty
Solid State Drive
HP 100GB 6G SATA Mainstream Endurance SFF 2.5-in Enterprise Mainstream 3yr Wty
Solid State Drive
6G SAS Hot Plug Enterprise Performance Solid State Drives
730065-B21
HP 400GB 6G SAS SLC SFF (2.5-inch) Enterprise Performance 3yr Warranty Solid State
Drive
HP 200GB 6G SAS SLC SFF (2.5-inch) Enterprise Performance 3yr Warranty Solid State
Drive
6G SAS ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
632494-B21
HP 800GB 6G SAS Mainstream Endurance SFF 2.5-in Enterprise Mainstream 3yr
Warranty Solid State Drive
HP 400GB 6G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream 3yr Warranty Solid
State Drive
HP 200GB 6G SAS Mainstream Endurance SFF 2.5-in Enterprise Mainstream 3yr
Warranty Solid State Drive
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html
(Worldwide)
690823-B21
DA - 13747 Worldwide — Version 35 — December 13, 2013
730063-B21
730061-B21
730059-B21
632492-B21
690821-B21
690819-B21
Page 21
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Additional Options
HP Insight Software
Insight Control
HP Insight Control including 1yr 24x7 Technical Support and Updates Single Server
License
HP Insight Control including 1yr 24x7 Technical Support and Updates Electronic License
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle FIO Electronic
License
HP Insight Control Server Provisioning Media Kit
HP Insight Management Media Kit
NOTE: HP Insight Management Media Kit contains DVDs without licenses. Contains HP
Systems Insight Manager, HP Insight Control, HP Matrix Operating Environment, and
Virtual Connect Enterprise Manager software. Uses an integrated installer to perform
quick and accurate software installation and updates.
NOTE: Licenses ship without media. The Insight Control Media Kit can be ordered
separately, or can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: Customer will receive a license entitlement certificate, which must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one year of 24
x 7 HP Software Technical Support Service.
NOTE: For additional License Kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12631_div/12631_div.html
(Worldwide)
HP Integrated Lights-Out (iLO) Advanced for ProLiant BladeSystem Remote
Management
HP iLO Advanced Blade including 3yr 24x7 Tech Support and Updates Electronic License
HP iLO Advanced Blade 1 Server License with 3yr 24x7 Tech Support and Updates
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Eight Server License
HP iLO Advanced for BladeSystem including 1yr 24x7 Tech Support and Updates
Electronic License
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Single Server License
C6N27A
C6N28ABE
C6N36ABE
BD883A
C6N31A
E6U63ABE
BD502A
512489-B21
E6U60ABE
512488-B21
NOTE: Customer will receive a license entitlement certificate, which must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one year of 24
x 7 HP Software Technical Support Service
NOTE: For additional license kits, including electronic delivery options, please see the
iLO QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14276_div/14276_div.html
(Worldwide)
HP Insight Control server deployment
HP Insight Control Server Deployment including 1yr 24x7 Support Electronic License
HP Insight Control Server Deployment including 1yr 24x7 Support Single Server License
NOTE: Licenses ship without media.
NOTE: Customer will receive a license entitlement certificate, which must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one year of 24
x 7 HP Software Technical Support Service.
NOTE: For additional license kits please see the Insight Control QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12631_div/12631_div.html
DA - 13747 Worldwide — Version 35 — December 13, 2013
T9082AAE
452151-B21
Page 22
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Additional Options
(Worldwide)
Converged Infrastructure HP OneView
Management Software
HP OneView with iLO Advanced
HP OneView incl 3yr 24x7 Supp Phys 1 Svr Lic
HP OneView incl 3yr 24x7 Supp Flex Qty E-LTU
HP OneView Media Kit Phys No Lic
HP OneView without iLO Advanced
E5Y34A
E5Y35AAE
E5Y37A
HP OneView w/o iLO Adv incl 3yr 24x7 Supp Phys 1 Svr Lic
HP OneView w/o iLO Adv inc 3yr 24x7 Supp Flex Qty E-LTU
E5Y38A
E5Y39AAE
NOTE: For additional license kits please see the QuickSpecs at
http://h18004.www1.hp.com/products/quickspecs/14621_div/14621_div.html
High Performance
Clusters
HP Cluster Management Utility
HP Insight Cluster Management Utility 1yr 24x7 Flexible License
NOTE: This part number can be used to purchase one certificate for multiple licenses
with a single activation key. Each license is for one node (server). Customer will receive
a printed end user license agreement and license entitlement certificate via physical
shipment. The license entitlement certificate must be redeemed online in order to
obtain a license key.
HP Insight Cluster Management Utility 3yr 24x7 Flexible License
NOTE: These part numbers can be used to purchase one certificate for multiple licenses
and support with a single activation key. Each license is for one node (server). Customer
will receive a printed end user license agreement and license entitlement certificate via
physical shipment. The license entitlement certificate must be redeemed online in order
to obtain a license key. Customer also will receive a support agreement.
HP Insight Cluster Management Utility Media
NOTE: Order a minimum of one license per cluster to purchase media including
software and documentation, which will be delivered to the customer, and also licenses
Insight CMU management. No license key is delivered or required.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html
(Worldwide)
DA - 13747 Worldwide — Version 35 — December 13, 2013
QL803B
BD476A
BD477A
Page 23
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Additional Options
HP Security
HP Trusted Platform Module Option
NOTE: The BL620c G7 server includes a Trusted Platform Module (TPM) connector for
an optional TPM 1.2 upgrade. The TPM 1.2 option is a microcontroller chip that can
securely store artifacts used to authenticate the server platform. These artifacts can
include passwords, certificates and encryption keys. Windows® BitLocker™ Drive
Encryption (BitLocker) is a data protection feature available in Windows Server® 2008.
BitLocker leverages the enhanced security capabilities of TPM version 1.2. The TPM
works with BitLocker to help protect user data and to ensure that a server operating
Windows Server 2008 has not been tampered with while the system was offline.
NOTE: For more information about TPM, including a white paper, go to:
http://www.hp.com/go/TPM.
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM
deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained.
Misplacing or losing the key could result in data loss.
HP Storage Controllers
NOTE: The P410i is configured with no cache allowing the end user to select the desired
cache option (if cache is desired in the first place).
NOTE: RAID 0 and 1 are supported on the P410i without the need for a cache option.
488069-B21
NOTE: The server supports up to a combined total of two (2) battery cache options for
the P410i and/or optional Smart Array RAID controllers.
HP Smart Array P711m Controller
HP Smart Array P711m/1G 6Gb FBWC 4-ports Ext Mezzanine SAS Controller
HP Smart Array P712m Controller
513778-B21
HP Smart Array P712m/256 6Gb 2-ports Int/2-ports Ext Mezzanine SAS Controller
Optional Upgrades
488348-B21
HP 512MB Flash Backed Write Cache
NOTE: This is an option for the HP Smart Array P410i Controller (P410i is standard
integrated controller).
HP 1GB Flash Backed Cache
NOTE: This is an option for the HP Smart Array P410i Controller (P410i is standard
integrated controller).
HP Smart Array P-Series Low Profile Battery
HP Smart Array Advanced Pack including 1yr 24x7 Technical Support and Updates
Single Server License
NOTE: The above HP Smart Array Advanced Pack and any above cache option are
required to enable Smart Array Advanced Pack features on the P410i. For more
information go to: http://www.hp.com/go/saap.
NOTE: The Smart Array Advanced Pack is hosted on the P410i Smart Array Controller
hardware firmware stack.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14035_div/14035_div.html
(Smart Array P711m Controller)
http://h18000.www1.hp.com/products/quickspecs/13296_div/13296_div.html
534916-B21
DA - 13747 Worldwide — Version 35 — December 13, 2013
534562-B21
452348-B21
516471-B21
Page 24
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Additional Options
(Smart Array P712m Controller)
http://h18000.www1.hp.com/products/quickspecs/13200_div/13200_div.html
(Worldwide)
(Smart Array Advanced Pack)
HP c-Class Mezzanines
HP Ultrium Tape Blades
HP InfiniBand Mezzanine Options
HP 4X QDR QLogic InfiniBand Dual Port Mezzanine HCA for c-Class BladeSystem
HP BL c-Class PCI Express Mezzanine Pass Thru Option Kit
NOTE: The HP PCI Express Mezzanine Pass-Thru Card is required to support the HP
Ultrium Tape Blades and the PCI Expansion Blade. Up to two Ultrium Tape and/or PCI
Expansion Blades are supported per server mix and match.
NOTE: The HP PCI Express Mezzanine Pass-Thru Card can be placed in mezzanine slot 2
and/or 3.
583210-B21
431643-B21
HP StoreEver LTO-4 Ultrium SB1760c Tape Blade
HP StoreEver LTO-5 Ultrium SB3000c Tape Blade
NOTE: The HP PCI Express Mezzanine Pass-Thru Card (P/N 431643-B21) is required to
support the Ultrium Tape Blades with the BL620c G7. Up to two storage blades are
supported per server mix and match (Ultrium Tape, PCI Expansion Blades, and/or
Storage Expansion Blades).
NOTE: The HP PCI Express Mezzanine Pass-Thru Card can be placed in mezzanine slot 2
and/or 3.
HP D2200sb PCIe Storage Blade
NOTE: The HP PCI Express Mezzanine Pass-Thru Card (P/N 431643-B21) is required to
support the HP D2200sb PCIe Storage Blade with the BL620c G7. Up to two storage
blades are supported per server mix and match (Ultrium Tape, PCI Expansion Blades,
and/or Storage Expansion Blades).
NOTE: The HP PCI Express Mezzanine Pass-Thru Card can be placed in mezzanine slot 2
and/or 3.
NOTE: Please see the HP s D2200sb PCIe Storage Blade QuickSpecs for technical
specifications and additional information at:
http://h18006.www1.hp.com/storage/bladesystem/index.html.
AQ697B
BS580B
DA - 13747 Worldwide — Version 35 — December 13, 2013
AP880A
Page 25
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Additional Options
HP Expansion Blade
HP BLc PCI Expansion Blade
NOTE: Ships with one pre-installed PCI-X connect board. Also includes one PCIe connect
board which requires installation.
NOTE: The HP PCI Express Mezzanine Pass-Thru Card (P/N 431643-B21) is required to
support the HP PCI Expansion Blade with the BL620c G7. Up to two expansion blades
are supported per server mix and match (Ultrium Tape, PCI Expansion Blades, and/or
Storage Expansion Blades).
NOTE: The HP PCI Express Mezzanine Pass-Thru Card can be placed in mezzanine slot 2
and/or 3.
NOTE: In a c3000 rack enclosure where the blades are installed horizontally, up to two
expansion blades may installed in the two slots created by the mini divider in the top
half of the enclosure with a BL620c G7 installed in the lower half of the enclosure.
NOTE: In a c3000 tower and c7000 rack enclosure where the blades are installed
vertically, two expansion blades may installed in the blade slots adjacent to the BL620c
G7 by staking one on top of another via a blade coupler that is included with the PCI
Express Mezzanine Pass-Thru Card and the expansion blades. If a single expansion
blade is installed, it must be installed in the lower slot adjacent to the BL620c G7; a
half-height server may be installed above the expansion blade.
NOTE: Please see the HP PCI Expansion Blade QuickSpecs for technical specifications
and additional information at
http://h18004.www1.hp.com/products/blades/expansion/index.html.
448018-B21
HP Flash Media Kits for
USB Drives
HP USB 2-Button Optical Scroll Mouse
HP USB Standard Keyboard
HP Flash Media Kits for USB Drives
DC172B
DT528A#ABA
HP 2GB USB Flash Media Drive Key Kit
NOTE: HP qualified blank USB key for use with HP ProLiant servers that support the
VMware virtualization environment. HP recommends this industry standard USB flash
device for use with VMware ESXi. USB device must be installed in the internal slot of the
ProLiant server for use with VMware ESXi. Refer to HP VMware Getting Started Guide for
installation instructions.
HP Enterprise Mainstream Flash Media Kits for Memory Cards
608447-B21
HP 8GB USB Enterprise Mainstream Flash Media Drive Key Kit
HP 8GB microSD Enterprise Mainstream Flash Media Kit
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13971_div/13971_div.html
737953-B21
726116-B21
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 26
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Additional Options
HP Care Pack Services
Proactive Care - Collaborative Support plus Proactive services delivered by the on
shore/near shore Advanced Solution Center (ASC) and backed by the global delivery
organization, end-to-end case ownership from a Technical Solution Specialists and
Technical Account Manager who remotely delivers firmware/software revision
management, proactive scans and incident trend reports. Recommended for customers
running a virtualized infrastructure and/or customers who desire an enhanced call
support experience.
HP 3 year 4 hour 24x7 ProLiant BL6xxc Proactive Care Service
HP 3 year 4 hour 24x7 with Defective Media Retention ProLiant BL6xxc Proactive Care
Service
HP 3 year 6 hour Call To Repair 24x7 ProLiant BL6xxc Proactive Care Service
HP 3 year 6hr Call To Repair 24x7 with Defective Media Retention ProLiant BL6xxc
Proactive Care SVC
Proactive Care Personalized Support Environmental Option - to add an onsite
Account Support Manager (ASM) to Proactive Care. ASM is an assigned resource who
delivers support planning and brings technical expertise and best practices advice for
the customer's environment.
HP 3 year ISS ProactiveCare Personalized Support
Installation Services - reduce the time required to get your system up and running and
help minimize disruptions to your business.
HP Install c-Class Server Blade Service
HP Hardware Installation during Non Standard Hours c-Class Enclosure and Server
Blade Service
Additional HP Care Pack services can be found at:
http://www.hp.com/go/cpc
DA - 13747 Worldwide — Version 35 — December 13, 2013
U3B32E
U3B35E
U3B38E
U3B41E
U6W98E
UE493E
UG869E
Page 27
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Memory
Memory Subsystem Architecture
For maximum memory bandwidth, performance, and capacity, each processor socket contains two memory controllers. Each memory
controller connects to two Intel® 7510 Scalable Memory Buffers (SMB) for a total of four SMBs per processor. Each SMB connects to
four RDIMMs for a grand total of sixteen RDIMMs per installed processor (32 total RDIMMs per BL620c G7 server) providing up to 1.0TB
of memory (32GB RDIMMs x 32 DIMM slots).
All RDIMMs will operate at the highest possible speed for a given processor. Memory speed is not affected by number of RDIMMs or
ranks. However, memory speed is a function of the processor QPI bus speed per the following:
Processors with a QPI speed of 6.40GT will operate memory at 1066MHz
Processors with a QPI speed of 5.86GT will operate memory at 978MHz
Processors with a QPI speed of 4.80GT will operate memory at 800MHz
DDR3 and DDR3L Memory Population Guidelines
An overview of the RDIMM installation guidelines are summarized below. For detailed memory configuration rules and guidelines,
please see the BL620c G7 user guide at: www.hp.com/support and the Online DDR3 Memory Configuration Tool at:
www.hp.com/go/ddr3memory-configurator.
1.
2.
3.
4.
Install only HP BL620c G7 supported DDR3 and DDR3L RDIMMs.
RDIMMs must be installed for processor 1.
Populate RDIMM slots for a processor only if the processor is installed.
To maximize performance in multi-processor configurations, distribute the total memory capacity between all processors as
evenly as possible.
5. The minimum configuration is two RDIMMs installed on processor 1.
6. RDIMMs must be installed in pairs with identical characteristics. When possible, for configuration simplicity, HP recommends
using RDIMMs with identical part numbers throughout the system.
7. For best performance, HP recommends that RDIMM pairs be populated in sequence by letter designation. Install RDIMM pair (4A,
5A) first, followed by RDIMM pair (12B, 16B), RDIMM pair (2C, 7C), RDIMM pair (10D, 14D), RDIMM pair (3E, 6E), RDIMM pair (11F,
15F), and RDIMM pair (1G, 8G).
8. When installing mixed rank RDIMMs for any processor, RDIMMs with the highest number of ranks must be installed in the white
RDIMM connector locations. This guarantees proper electrical signaling on the DDR3 channel since RDIMMs with higher rank
counts present larger electrical loading on the DDR3 channel and must be populated at the end point of the channel.
9. 1.5V DDR3 and 1.35V DDR3L RDIMMs may be installed within the same socket. In this case, all RDIMMs on that socket will
operate at 1.5V.
10. The BL620c G7 supports memory hemisphere mode (for a high-performance memory interleaving technology) as well as several
advanced memory modes (AMP) including advanced ECC, online spare, and mirrored memory. Please see the BL620c G7 user
guide at: www.hp.com/support for a description of each of these features and their memory configuration guidelines.
11. There are several additional recommended steps for memory performance optimization, please see the BL620c G7 user guide
at: www.hp.com/support for a complete list.
Standard Memory
32GB (4 x 8GB) of dual-rank DDR3-1066 RDIMMs
Standard Memory Plus Optional Memory
Up to 832GB of memory is available with the installation of optional DDR3 RDIMM memory expansion kits
Model Standard Memory Replaced with Optional Memory
Up to 1.0TB of memory is available with the removal of standard memory and the installation of optional DDR3 RDIMM memory
expansion kits
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 28
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Memory
ProLiant BL620c G7 Memory Configurations
Memory
Standard
32GB total
1G
Empty
9H
Empty
Optional
416GB per
CPU
(832GB total)
1G
32GB
9H
32GB
Maximum
512GB per
CPU
(1.0TB total)
1G
32GB
9H
32GB
Processor 1 RDIMM Slots
(Processor 2 has the same DIMM slot numeration, but all slots are empty)
2C
3E
4A
5A
6E
7C
Empty
Empty
8GB
8GB
Empty
Empty
10D
11F
12B
13H
14D
15F
Empty
Empty
Empty
Empty
Empty
Empty
Processor 1 RDIMM Slots
(Processor 2 has the same RDIMM configuration)
2C
3E
4A
5A
6E
7C
32GB
32GB
8GB
8GB
32GB
32GB
10D
11F
12B
13H
14D
15F
32GB
32GB
32GB
32GB
32GB
32GB
Processor 1 RDIMM Slots
(Processor 2 has the same RDIMM configuration)
2C
3E
4A
5A
6E
7C
32GB
32GB
32GB
32GB
32GB
32GB
10D
11F
12B
13H
14D
15F
32GB
32GB
32GB
32GB
32GB
32GB
8G
Empty
16B
Empty
8G
32GB
16B
8GB
8G
32GB
16B
32GB
HP ProLiant BL620c G7 memory options:
HP Memory
Registered DIMMs (RDIMMs)
Following are the BL620c G7 memory options available from HP:
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power
Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 LP
Memory Kit
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7 Memory Kit
HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered CAS-7 LP Memory
Kit
NOTE: All DDR3 memory option kits consist of one RDIMM per kit.
NOTE: For detailed memory configuration rules and guidelines, please see the BL620c
G7 user guide at: www.hp.com/support and use the Online DDR3 Memory Configuration
Tool at: www.hp.com/go/ddr3memory-configurator.
DA - 13747 Worldwide — Version 35 — December 13, 2013
500658-B21
500662-B21
604506-B21
627812-B21
500666-B21
627814-B21
Page 29
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Storage
1-2
2 x SFF SAS/SATA/SDD hot-plug hard drives
Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate
at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: SAS, SATA, and/or SSD drives cannot be mixed within the server.
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
Quantity
Supported
1.2TB 6G SAS 10K
2
900GB 6G SAS 10K
600GB 6G SAS 10K
450GB 6G SAS 10K
300GB 6G SAS 15K
300GB 6G SAS 10K
146GB 6G SAS 15K
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Quantity
Supported
Position
Supported
1-2
Position
Supported
1.0TB 6G SAS 7.2K
2
1-2
500GB 6G SAS 7.2K
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Quantity
Supported
Position
Supported
Controller
Smart Array P410i Controller
Controller
HP Smart Array P410i Controller
Controller
1.0TB 3G SATA 7.2K
2
1-2
HP Smart Array P410i Controller
500GB 3G SATA 7.2K
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Boot Solid State Drives
Quantity
Supported
Position
Supported
Controller
120GB 6G SATA VESFF
2
1-2
HP Smart Array P410i Controller
80GB 6G SATA VESFF
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Value Solid State Drives
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 30
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Storage
Quantity
Supported
Position
Supported
Controller
800GB 6G SATA VE SFF
2
1-2
HP Smart Array P410i Controller
600GB 6G SATA VE SFF
480GB 6G SATA VE SFF
300GB 6G SATA VE SFF
240GB 6G SATA VE SFF
6G SATA ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
Quantity
Supported
Position
Supported
800GB 6G SATA ME SFF
2
1-2
400GB 6G SATA ME SFF
200GB 6G SATA ME SFF
100GB 6G SATA ME SFF
6G SAS Hot Plug Enterprise Performance Solid State Drives
Quantity
Supported
Position
Supported
Controller
HP Smart Array P410i Controller
Controller
400GB 6G SAS SLC
2
1-2
HP Smart Array P410i Controller
200GB 6G SAS SLC
6G SAS ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
800GB 6G SAS MLC
400GB 6G SAS MLC
200GB 6G SAS MLC
Quantity
Supported
Position
Supported
2
1-2
Controller
HP Smart Array P410i Controller
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 31
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Technical Specifications
System Unit
Dimensions
(H x W x D)
Weight
(approximate)
Power Specifications
System Inlet
Temperature
Relative Humidity
(non-condensing)
Altitude
Full height, single-wide server blade:
14.46 x 2.19 x 20.09 in (36.73 x 5.49 x 51.03 cm)
Maximum
24.24lbs (11.00kg)
(all hard drives, DIMMs,
mezzanine cards, and
processors installed)
Minimum
17.9lbs (8.12kg)
(two hard drives, four
DIMMs, no mezzanine
cards, and two processors
installed)
For power specifications including input requirements, BTU rating, and power
supply output, please see the HP BladeSystem c-Class Enclosures QuickSpecs
located at:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
(Worldwide)
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html
(Worldwide)
To review typical system power ratings use the HP BladeSystem Power Sizer
available at: http://www.hp.com/go/bladesystem/powercalculator.
Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m (1.8°F
per every 1000 ft) above sea level to a maximum
of 3050 m (10,000 ft), no direct sustained
sunlight. Maximum rate of change is 10°C/hr
(18°F/hr). The upper limit may be limited by the
type and number of options installed. System
performance may be reduced if operating with a
fan fault or above 30°C (86°F).
Non-Operating
-30° to 60°C (-22° to 140°F), maximum rate of
change is 20°C/hr (36°F/hr).
Operating
10 to 85% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, noncondensing.
Non-Operating
10 to 95% relative humidity (Rh), 38.7°C (101.7°F)
maximum wet bulb temperature, noncondensing.
Operating
3050 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable altitude
change rate is 457 m/min (1500 ft/min).
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 32
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Technical Specifications
Acoustic Noise
Smart Array P410i
Controller
For acoustic noise specifications, please see the HP BladeSystem c-Class
Enclosures QuickSpecs located at:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html
Disk Drive and Enclosure 6G SAS (Serial Attached SCSI)
Interface
3G SATA (Serial Advanced Technology Attachment)
SAS Connectors
Two (2) internal (SFF8484) x4 wide port connectors
Cache Memory Speed
Server Interface
DDR2-533MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s maximum
bandwidth.
x4 5G PCIe Gen2 provides 2GB/s maximum bandwidth.
SAS Speed
x2 6G SAS provides 1.2GB/s maximum bandwidth.
Cache Memory
72-bit 1GB cache; ECC protection, capacitor-backed
Logical Drives Supported Up to 32 logical drives
Maximum Logical Drive
Capacity
2 TB (2 x 1 TB)
Host Memory Addressing 64-bit, supporting greater than 4GB server memory space
RAID Support
Upgradeable Firmware
HP NC553i10Gb FlexFabric Type
Adapter
Network Processor
RAID 0 (Striping)
RAID 1 (Mirroring)
NOTE: RAID 0 and 1 require two drives installed in the server.
NOTE: RAID 0 and 1 are supported on the P410i without the need for a cache
option.
Upgradeable firmware with recovery ROM capability
Integrated KR 10GbE with FlexFabric (Flex-10, FCoE, accelerated iSCSI, iSCSI
boot, 10GbE, 1GbE, TCP/IP offload engine)
Blade Engines 3 (BE3)
Data Transfer Method
x8 PCI Express 2.0
Network Transfer Rate
20Gbps per port full duplex only (theoretical maximum value)
NOTE: Each port is autosensing 1Gb / 10Gb, and can interoperate with 1Gb HP
BladeSystem c-Class interconnect components.
NOTE: Each port on the NC553i adapter transmits from the server at 20Gbps
(theoretical) full duplex.
802.1p QoS, 802.1Q VLAN tagging, 802.3ad link aggregation, 802.3ap
10GBase-KR, and 802.3x flow control
ProLiant Teaming including Network Fault Tolerance, Transmit Load
Balancing, and Switch-Assisted Load Balancing
9K Jumbo frames (4K Jumbo frames when in FCoE mode)
Microsoft Windows Receive Side Scaling (RSS)
FCoE or accelerated iSCSI mode
IEEE Compliance
Standard Features
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 33
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Technical Specifications
iSCSI boot
Flex-10 support
TCP/IP offload engine
10Gb Ethernet ort 1Gb Ethernet autosensing
Microsoft TCP chimney compliant
Supports 8 Physical Functions (PF)
Supports 128 Virtual Functions (VF):
Up to 32 VFs per PF
Support 128 MAC address
Traffic Shaping and QoS across each VF and PF:
NIC Fine-grain QoS 10 Mbps to 10Gbps in steps of 10Mbps
HBA fine-grain QoS 1000 IOPs to 500,000 IOPs in steps of 1000 IOPS
On-chip VM-VM switching
Traffic steering and isolation
Hardware based filtering for 128 VLANIDs with QinQ tag filtering
Protection against denial-of-service attacks & malfunctioning VMs
HP Integrated Lights-Out Architecture
3 (iLO 3)
Processor
PCI Express based health and remote management ASIC
PCI Express RISC processor core operating at 250MHz
Upgradeability
Option firmware upgradeable via Flash ROM
Video Support
1600 x 1200 DVR max resolution
Interfaces
One Ethernet network connection (10/100Mb/s)
Memory
128-MB DDR with ECC
Operating System
Support
Microsoft Windows 2008 R2
Microsoft Windows 2008 (32 bit and 64 bit)
Microsoft Windows Server 2008 Standard Edition (32bit and 64bit)
Microsoft Windows Server 2008 Enterprise Edition (32bit and 64bit)
Microsoft Windows Server 2003 and Windows Server 2003 R2, and Windows
Server 2003 for Extended Systems Standard Edition, Enterprise Edition
Red Hat Enterprise Linux 5.4 (32 bit and 64 bit)
SUSE LINUX Enterprise Server 11 (32bit and 64bit)
SUSE LINUX Enterprise Server 10 (32bit and 64bit)
VMware ESX 4.0
VMware ESX 3.5.0
Microsoft Windows 2008 R2
Microsoft Windows 7
Microsoft Windows XP Professional Edition
Microsoft Windows Vista Business and Ultimate Editions
Red Hat Enterprise Desktop 5.00
SUSE Linux Enterprise Desktop 11
SUSE Linux Enterprise Desktop 10
Client System Support
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 34
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Technical Specifications
Client Browser Support
Command Line Support
Security
Directory Support
Services
Environment-friendly
Products and Approach
Microsoft Internet Explorer 8
Microsoft Internet Explorer 7
Microsoft Internet Explorer 6
Firefox 3.5 (on supported Windows and Linux systems)
Firefox 3.0 (on supported Windows and Linux systems)
Secure Shell and serial port access
Secure Socket Layer
Secure Shell version 2
Advanced Encryption Standard (AES) and Triple Data Encryption Standard
(3DES) on browser, CLP and XML scripting interface
AES encryption of video
RC4 encryption of video
Active Directory v1.0 (Windows 2003)
Driver Support
HP ProLiant iLO3 Management Controller Driver Package
Management protocols
supported
SNMP, IPMI 2.0 (system and LAN interface), DMTF Systems Management
Architecture for Server Hardware Command Line Protocol (SMASH CLP), HP
RIBCL XML
End-of-life Management Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
and Recycling
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may be
used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 35
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Technical Specifications
© Copyright 2013 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft is a US registered trademarks of Microsoft Corporation.
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes (1,000 MB). Actual formatted capacity is less.
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 36
Download PDF
Similar pages