Crimp Tools and Positioners for Coaxial Contacts

Tools
Contact Tools
Crimp Tools and Positioners for Coaxial Contacts
Crimp Tool And Positioner For #12, #16 and #20 Power Contacts, Crimp Adapters
J
K
Crimp tool for use with size #20, #16 and #12 power
pins. 9.75 inches OAL, 1.25 pounds. Use with
M39029/57 and /58 contacts and 809-093 adapters.
J
L
K
L
Positioner for use with size #20, #12 and
#16 Power contacts.
Positioner for use with 809-093 Mighty Mouse
and Micro Crimp wire adapters.
Figure
J
K
L
Part Number
809-136
809-137
809-138
Military Part Number
M22520/1-01
M22520/1-04
(none)
Daniels Part Number
AF8
TH163
TH653
Crimp Tool And Positioner For #16 Coaxial Outer Contact
M
For crimping size #16 shield sleeves. These mil spec approved tools feature a ratchet mechanism
to prevent damage from over crimping. Check calibration with M22520/3 gage.
M
Crimp tool for use with size #16 coaxial
contacts. Blue handles. 9.75 inches OAL,
1.25 pounds.
Figure
M
N
Part Number
809-127
809-126
N
Positioner for use with size #16 coaxial contacts.
Use with 809-127 (M22520/4-01) crimp tool.
Military Part Number
M22520/4-01
M22520/4-02
N
Crimp Tool And Positioner For #12 Coaxial Outer Contact
O
For crimping size #12 shield sleeves. These mil spec approved tools feature a ratchet mechanism
to prevent damage from over crimping. Check calibration with M22520/3 gage.
O
Crimp tool for use with size #12 coaxial contacts.
Black handles. 9.75 inches OAL, 1.25 pounds.
Figure
O
P
P
Daniels Part Number
GS100-1
GP295
Part Number
809-133
809-134
P
Positioner for use with size #12 coaxial contacts.
Use with 809-133 (M22520/31-01) crimp tool.
Military Part Number
M22520/31-01
M22520/31-02
Daniels Part Number
GS200-1
G2P330
Parallel Action Crimp Tool and Hex Die Set for 50 Ohm Matched Impedance #12 Coax
Q
Q
R
© 2011 Glenair, Inc.
Parallel action tool for use with hex crimp
dies. 11 inches OAL, 2.0 pounds. Anodized
aluminum frame, steel mechanism, plastic
handles. Includes tool for die set extraction.
Accepts all M22520/5 die sets.
Figure
Q
R
Part Number
809-129
809-130
CAGE Code 06324
R
Die set for terminating coaxial shield to outer
contact. Use with size #12 matched impedance
M39029/102 and 103 type coaxial contacts. Set consists
of upper and lower halves. Made of hardened steel with
black oxide finish. Die set has two closures.
Military Part Number Daniels Part Number
M22520/5-01
HX4
M22520/5-03
Y196
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-3
www.glenair.com
E
Download PDF
Similar pages