TVSS Products SPIKESHIELD Power Quality Products

SPIKESHIELD® Power Quality Products
Power Quality Products
TVSS Products
Branch Panel
Wired-In Surge Protection
80,000 and 100,000 Peak Amperage Capacity
Wired-in Branch Panel Surge Protection (100,000 Peak Amperage)
5kA Short Circuit Current Rating*
HBL4W100A
Voltage
Catalog Numbers
Without Filter
Single Phase 120/240V AC HBL3W100A
HBL3W100NFA
3Ø Wye 120/208V AC
HBL4W100A
HBL4W100NFA
3Ø Delta 240V AC
HBL5W100A
–
3Ø Delta 240/120V AC
HBL6W100A
–
3Ø Wye 220/380V AC
HBL7W100A
–
3Ø Wye 277/480V AC
HBL8W100A
–
3Ø Delta 480V AC
HBL9W100A
–
3Ø Wye 347/600V AC
HBL10W100A
–
3Ø Delta 600V AC
HBL11W100A
–
Notes: Flush mount adapter available, catalog number HBLWFMA.
For technical information, see page J-17.
* 22kA SCCR w/field installed fusing, see instructions.
Wired-in Branch Panel Surge Protection (80,000 Peak Amperage)
100kA Short Circuit Current Rating
c
Voltage
Single Phase 120/240V AC
3Ø Wye 120/208V AC
3Ø Wye 220/380V AC
3Ø Wye 277/480V AC
3Ø Delta 480V AC
Note: + Non-metallic NEMA 4X housing
HBL4W100A
c
Catalog Numbers
HBL3W80+
HBL4W80+
HBL7W80+
HBL8W80+
HBL9W80+
Wired-In Branch Panel Surge Protection
The wired-in surge suppression block design is ideal for areas where
space is a major consideration. The surge unit can be mounted
directly to the panel through a chase nipple connection which will
reduce lead length and impedance while increasing protection levels.
The 100W series has a 5 kA SCCR which may be increased to 22
kA with the use of fusing to achieve the higher rating. The 120/240V
single phase and 120/208V three phase models of the 100W family
are available in a non-filtered version. The non-filtered version will
not interfere with clocking and power line carrier signals (for lighting
controls) by allowing safe passage for the control signals while
maintaining protection for the sensitive electronic system. The
control signals, if filtered, could cause certain systems to go out of
synchronization. The 80W series has a 100 kA SCCR rating and
features a non-metallic NEMA 4X housing for outdoor applications or
when used on the plant floor in wash-down areas.
TVSS Products
Features
Thermal fusing (100W).
HBLWFMA
(W100 Series Only)
J-8
Benefits
Thermal fuse prevents the MOVs from
overheating when exposed to high current
levels, a patented Hubbell exclusive.
Compact design.
Allows installation in areas with space
restrictions and helps minimize connecting
lead length which can cause higher impedance.
80/100kA peak amp capacity.
Provides high level of protection for
equipment under severe electrical
conditions.
LED & audible alarm.*
Provides visual and audible indication of
suppressor status.
Sine wave tracking.
Provides uniform clamping throughout the
sine wave.
Notes: Wired-in products are UL Listed to Standard 1449.
* 80W series features LED only.
www.hubbell-wiring.com
Dimensions in Inches (mm)
Download PDF
Similar pages