S125 - 5" Define DIP_RDIP - Direct Indirect

Neo-Ray
DESCRIPTION
The Define series by Neo-Ray characterizes the ultimate in minimalist
simplicity by providing clean, uniform lines of illumination in virtually any
architectural environment. Powered by Eaton’s most advanced linear LED
technology, the Define series delivers outstanding efficacy in a variety of
profile widths. 2”, 3”, 4” and 5” luminaire widths are all specifiable to the
nearest foot as standard product and can be fitted with flush, regress and
drop lensing. Custom corners and transitions are also available. Robust
construction and adaptable, modular components make installation simple
and ensure laser straight runs.
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
Construction
Electrical
Housing extruded from 6063
aluminum. Nominal 2’ -12’
illuminated sections. Used in run
configuration and/or individual
fixtures. All components are
RoHs compliant.
Long-life LED system coupled
with electrical driver to deliver
optimal performance. LED’s are
available in 2700K, 3000K, 3500K
or 4000K with a typical CRI ≤ 85.
Projected life is 153,000 hours at
>79% lumen output. Electronic
drivers are available for 120277V applications. Fixtures and
electrical components certified to
UL and CUL standards. Fixtures
are damp location listed.
Lens
Snap in lens available in flush
and drop lens profiles. Snap
in end clips eliminate light leak
and prevent moisture and insect
ingress.
Controls
Finish
Fixture housings are high
reflectance white using
electrostatically applied polyester
powder coat paint.
Equipped standard with a 0-10V
continuous dimming driver
compatible with most standard
dimming devices (refer to
website for specific compatibility
reference).
Combine with FifthLight DALI and
other energy saving products like
sensors, daylighting controls and
building management systems to
maximize energy savings.
Mounting
Suspended.
Pendant with single aircraft cable and
circular canopy. Standard length of
canopy is 48”.
Warranty
Five year warranty.
Define 5
Pendant
LED
Direct / Indirect
5.63”
143 mm
CERTIFICATION DATA
6.63”
168 mm
cULus - 1598
Damp Location Listed
LM79/LM80 Compliant
RoHS Compliant
Lumawatt Pro Wireless
4.68”
119 mm
4.68”
119 mm
5”
127 mm
5”
127 mm
ORDERING INFORMATION
Sample Number: S125DIP-U1-235-SC48-ETG0048-1D-UDD-1-5-W
LIGHT
DISTRIBUTION
LIGHT LEVEL
UP1
LIGHT LEVEL
DOWN1
COLOR
TEMP
MOUNTING
CABLE LENGTH
DIP = D
irect / Indirect Pendant
RDIP = Regressed Direct / Indirect
-ULO = Light Level ULO
-LO = Light Level LO
-SC48 = 48” (std)
-U1
-1
27 = 2700K
30 = 3000K
35 = 3500K
40 = 4000K
SERIES
S125 = Define 5
Pendant
-U2
CIRCUITING
-1 = Single Circuit
-2 = Dual Circuit
CIRCUIT TYPE
D=
C=
B=
E=
G=
Dimming (std)
Non-Dimming
Battery Pack 8
Emergency
Bodine GTD
454 Lm/Ft*
= Light Level U1
884 Lm/Ft*
= Light Level U2
1272 Lm/Ft*
-2
366 Lm/Ft*
= Light Level 1
711 Lm/Ft*
= Light Level 2
1024 Lm/Ft*
See page 2 for lumen output
See page 2 for lumen output
*Tested with no lens up
*Tested with satin lens down
VOLTAGE
LED DRIVER
SHIELDING DOWN
-1 = 120V
-2 = 277V
-U = U
niversal
ED = Non-Dimming
DD = 0-10 V Dimming (std)
HCD = 1% 0-10 V Dimming
5L = DALI Dimming 7
-1 = Satin White Diffuser
-3 = Asymmetric Flush
-4 = Satin Drop Diffuser
120V-277V
-3 = 347V 6
Adjustable Cable
-SC120 = 120”
Adjustable Cable
-SC240 = 240”
Adjustable Cable
SHIELDING UP
-NA = No Lens
(standard)
-5 = Satin White
Diffuser
CEILING TYPE2
LENGTH3
-ETG = 15/16” Flat T-Grid
-FTG = 9/16” Flat T-Grid
-ITG = 9/16” Interlude T-Grid
-STG = 9/16” Slot T-Grid
-JB = Gypsum board
-ST = Structure
0024 = 2’ Individual4
0048 = 4’ Individual
0072 = 6’ Individual
0096 = 8’ Individual
0144 = 12’ Individual
XXXX = Configurable
COLOR
-W = Matte White
-S = Silver
-B = Black
-C = Custom Color
Run5
OPTIONS 9
SVPD1 = Integrated Sensor13
LWIPD1 = Lumawatt Pro Wireless
Integral Sensor13
-90 = 90-CRI (Lower Lumens)
-R = GLR Fast Fusing
-F = GMR Slow Fusing
Notes:
* See page 4 for specific notes
PS524037EN
2017-02-22
Neo-Ray
Photometric Data - All data certified to LM-79 standards in a NAVLAB approved testing facility
180°
1,193
Filename: S125DIP-U1-135-SC48-SR0048-1D-UDD-1-NA-W
Test Number: P189500
Lumens: 6380.1 Lms
Watts: 52 W
LPW: 122.7 Lm/W
CCT: 3500K
175°
160°
145°
894
130°
596
298
115°
0
90°
ZONAL LUMEN STUDY
75°
60°
LUMINANCE DATA (cd / sq.m
Zone
Lumens
% Fixture
Angle
0-Deg
45-Deg
90-Deg
0-30
848
13.3
45
5978
5072
5873
0-40
1357
21.3
55
5485
4449
5371
0-60
2302
36.1
65
4949
3705
4772
0-90
2845
44.6
75
4143
2705
3855
90-180
3536
55.4
85
3027
1163
2570
45°
30°
0°
180°
1,717
15°
Filename: S125DIP-U2-235-SC48-SR0048-1D-UDD-1-NA-W
Test Number: P27899
Lumens: 9186 Lms
Watts: 80.5 W
LPW: 114.1 Lm/W
CCT: 3500K
175°
160°
145°
1,288
130°
859
429
115°
0
90°
ZONAL LUMEN STUDY
75°
60°
45°
LUMINANCE DATA (cd / sq.m
Zone
Lumens
% Fixture
Angle
0-Deg
45-Deg
90-Deg
0-30
1221
13.3
45
8607
7303
8455
0-40
1954
21.3
55
7897
6405
7732
0-60
3314
36.1
65
7126
5334
6871
0-90
4095
44.6
75
5964
3893
5549
90-180
5090
55.4
85
4355
1674
3702
30°
0°
15°
PS524037EN
2017-02-22
Neo-Ray
LIGHT OUTPUT, 3500K, ≤85CRI Typical
Light Level Up: ULO
Light
Level
Down
Lm
Total
% Dn
0
3278
1
4662
2
5913
Light Level Up: U1
% Up
Lm/ft
Down
Lm/ft
Up
Total
Watts
44.6%
55.4%
366
454
26.9
61.0%
39.0%
711
454
40.1
69.3%
30.7%
1024
454
55.2
Lm
Total
Light
Level
Down
% Dn
Light Level Up: U2
% Up
Lm/ft
Down
Lm/ft
Up
Total
Watts
0
4997
29.3%
70.7%
366
884
38.8
1
6380
44.6%
55.4%
711
884
52.0
2
7631
53.7%
46.3%
1024
884
67.0
Light
Level
Down
Lm
Total
% Dn
Lm/ft
Down
Lm/ft
Up
Total
Watts
0
6551
1
7934
22.3% 77.7%
366
1272
52.2
35.9% 64.1%
711
1272
2
9186
65.5
44.6% 55.4%
1024
1272
80.5
% Up
Correlation based on 4’ luminaire S125DIP-U2-235-SC48-ST0048-1D-UDD-1-NA-W, Report: P27899
Mounting Information - Refer to installation instructions for detailed mounting information
2ft Individual (0024)
Wire Feed
8ft Individual (0096)
25”
(635mm)
Wire Feed
97”
(2464mm)
Mounting
Locations
0.50”
(12.7mm)
24”
(610mm)
Mounting
Locations
0.50”
(12.7mm)
0.50”
(12.7mm)
4ft Individual (0048)
Wire Feed
48”
(1220mm)
0.50”
(12.7mm)
12ft Individual (0144)
49”
(1245mm)
Mounting
Locations
0.50”
(12.7mm)
96”
(2438mm)
0.50”
(12.7mm)
Wire Feed
0.50”
(12.7mm)
Mounting
Locations
145”
(3683mm)
144”
(3658mm)
0.50”
(12.7mm)
Lens Information - Direct (Downward) Lens Details
1”
26 mm
1 - Flush Satin Diffuser
Asymmetric Flush Diffuser
Regressed Satin Diffuser
Lens Information - Indirect (Upward) Lens Details
NA - No Diffuser (standard)
5 - Flush Satin Diffuser
1”
26 mm
4 - Satin Drop Down Diffuser
Neo-Ray
I N T E GRATED SENSO R DETAI LS AN D PLACEM EN T 13
Sensor Series
4ft
Individual
8ft
Individual
SV
Integrated Sensor
for Local Control
LWI
Lumawatt Pro
Wireless Integral
Occupancy
Technology
P
Passive
Infrared
Sensing
Technology
D
Dimming
Daylight
Harvesting
(Closed Loop)
Coverage
Pattern
1
~144 ft2
12ft
Individual
NOTES
1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
11. 12. 13. Additional lower light levels available. Please consult factory for specific details.
Not all ceiling types are shown; consult factory for specific ceiling types not listed.
All lengths are nominal. Refer to submittal drawings for actual sizes.
Not all dimming options available for every length; please consult factory for specific details.
For configurable runs specify length to nearest foot. Standard runs ship in 12ft increments. Ensure to specify 8ft increments if 12ft
are too large to recieve. Additional charges may apply; please consult factory for details.
347V is achieved using remote transformer.
FifthLight DALI is achieved using digital analog converter.
Battery pack options are not available in every length; please consult factory for specific details. Battery pack is remote installation only.
For all options; consult factory for specific requirements.
Not available with 347V circuit.
Asymmetric lens is not available as standard product on regressed housing RDR.
Standard product is configured with snap-in lens end caps at the beginning and end of a run or individual fixture. End caps are provided
for ease of installation and removal of the lens and eliminate light leak from the end of the fixture when flush satin lens is selected.
Please contact factory if lens end-caps are not desired as alternate configurations are available.
Integrated LumaWatt Pro Sensor available as a PDR in 4ft, 8ft, and 12ft configurations. Continuous runs and alternate lengths are also
available. Please consult factory for details. One sensor for every 8ft of fixture length. Standard configurations include Universal
voltage, single circuit and ‘DD’ driver selection. Not available with regressed housing or emergency options.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton Lighting
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
PS524037EN
2017-02-22
Download PDF
Similar pages