Datasheet
Top Power - Colour
USP’s
Made in Europe
Unique co-extrusion technology (hollow chamber)
IP40 (IP68 with liniLED® Top IP68 Kit)
Very flexible (bend radius > 30 mm)
Dimmable
Effective heat dissipation
Excellent lumen/ Watt ratio
Available in long lengths
UV, frost, seawater & chlorine vapour resistant
Available in various colours
Extensive range of accessories
Plug & Play
R
F
GLOW WIRE
850 °C
UV RESISTANT
CLEANING AGENTS
RESISTANT
RoHS
IP40/IP68
IK08
FROST
RESISTANT
SEA WATER
RESISTANT
SWIMMING POOL
ENVIRONMENT
30 mm
BEND RADIUS
See page 8 for explanation symbols
liniLED® LED strip Top Power - Colour
The liniLED® Top Power LED strip (IP40/IP68*) is a high quality, flexible LED strip with a unique co-extrusion technology. The combination of high quality and exceptional flexibility, allows for an endless range of indoor and outdoor applications. In addition to the
colours Red, Green, Blue and Amber, the liniLED® Top Power LED strips is also available in: Ultra Warm White 2400K, Extra Warm White
2700K, Warm White 3000K, Natural White 4000K and Cold White 6500K.
* Connect the Top LED strips with the liniLED® Top Connector Sets (1 m 11200 or 5 m 11201). Use the liniLED® Top Extension Cord
(11208) to extend. For waterproof (IP68) usage, combine with the liniLED® Top IP68 Kit (11506) and the liniLED® Top IP68 Extension
Kit (11507).
In order to power liniLED® products safely, it is absolutely necessary to operate them with an electronically stabilized power
supply protected against short circuits, overload and overheating.
To ease the luminaire/ installation approval, electronic control gear for liniLED® products should carry the CE mark. Preferably
a controller from the liniLED® Control Range. In Europe, the declarations of conformity must include the following standards:
CE: EN 55015, IEC 61547 and IEC 61000-3-2.
Content
Available colours liniLED® Top Power - Colour
Description
Colour
Red
Green
Blue
Amber
USP’s & available colours
liniLED® Top Power Red
liniLED® Top Power Green
liniLED® Top Power Blue
liniLED® Top Power Amber
1
Product codes & characteristics
2
Product drawings
3
Photometric information
3
Power consumption
4
Power supply
4
Cable selection
5
Maximum cable length
6
Connection diagram
7
Symbols & Disclaimer
8
For the latest version of this datasheet, visit our website: www.liniLED.com
Datasheet liniLED® Top Power - Colour
LED strip
1
03-04-2017
Datasheet
Product codes & characteristics
Ambient temperature = 25 °C
Product code [m]
Red
Green
Blue
Amber
11860
11862
11861
11863
Product characteristics
Spool length
max. 10 m
Section length
10 cm
LED
TopLED® long life
Number of LEDs
5 per section / 50 per metre
Max. connection length
10 m
Power (24 V DC)
8.3 W/m
4.9 W/m
7.2 W/m
8.3 W/m
Power (25 V DC)
8.7 W/m
5.1 W/m
7.5 W/m
8.7 W/m
Luminous flux steady state
102 lm/m
153 lm/m
68 lm/m
94 lm/m
Luminous efficiency
12 lm/W
31 lm/W
9 lm/W
11 lm/W
Wavelength
467 nm
625 nm
Operation voltage
525 nm
24 V DC
Max. operation voltage
25 V DC
587 nm
Beam angle
110°
Dimensions
12 x 6 mm
Dimmable
PWM dimming, 24 V DC Common Anode
Weight
70 gram per metre
Material
PVC (for chemical resistance please visit our website www.liniLED.com)
Expected lifetime
B50/L70 > 50,000 hours @ Tc = 40 °C
Degree of protection (IP)
IP40 (IP68 with liniLED® Top IP68 Kit)
Degree of protection (IK)
IK08
Storage temperature
-20 °C .. 55 °C
Operation temperature
-30 °C .. 55 °C1
Minimal bending radius
30 mm
1 Max. connection length between -20 °C and -30 °C is 7 metres.
Datasheet liniLED® Top Power - Colour
LED strip
2
03-04-2017
Datasheet
Product drawings
Bending radius
Dimensions
Drawings and dimensions are only to be used as indication, please contact Triolight B.V. for exact measurements and tolerances. Dimensions are
displayed in mm.
Photometric information
In the process of lighting design and calculations, the luminous flux and beam angle alone are not enough information to create a
representative and realistic calculation or render. Therefore, a complete set of photometric information of the liniLED® LED strips is
available on the liniLED® website (www.liniLED.com). The photometric information is available as download for each fixture, found
under the downloads tab.
The information on the website is available in two different file formats:
•
Eulumdat (*.ldt)
•
IES LM-63-1995 (*.ies)
There is one set of photometric files for a one metre length of LED strip and one for a segment length, that corresponds to the cutting length of each LED strip type. Using the one metre data, quick calculations and long lengths can be simulated with photometric
software. The segment data allows very detailed simulations, even curved lines can be approached in high detail.
Top Power Colour LED strips
This light diagram indicates the beam in the C0-C180 plane
(perpendicular to the length direction of the LED strip) and in the
plane perpendicular to that, the C90-C270 plane (along the length
direction of the LED strip).
Datasheet liniLED® Top Power - Colour
LED strip
3
03-04-2017
Datasheet
Power consumption
To power the liniLED® LED strips and lighting fixtures, a power supply from the liniLED® Power assortment can be selected.
Selection of the correct power supply must be done by taking the total requested power and the environment into account.
The total power consumption can be calculated by summing the requested power of all connected products.
To calculate the power consumption of a single length of LED strip, use the equation below. The typical equation is valid if the
product is supplied by a 24 V DC constant voltage power supply. If the output voltage of a power supply is increased, the power
consumption will increase with the same ratio and needs to be corrected by using the optional part of the equation found between
brackets.
[
PSTRIP = PPRODUCT x XLENGTH x 110% x
PSTRIP
PPRODUCT
XLENGTH
110%
USUPPLY
24
U SUPPLY
24
]
Calculated power consumption of one LED strip in Watt
Typical power consumption in Watt per metre of the selected LED strip
This value can be found under ‘Product characteristics’ on page 2
Length of the connected LED strip in metres
Safety margin to buffer differences over all production batches
Optional:
Set supply voltage of the power supply in Volt
Nominal supply voltage of liniLED® in Volt
Power supply
The liniLED® Power Supplies are available for different environments. For usage in normal dry environments (where the use of
an open-frame supply is omitted) the standard liniLED® IP20 Power Supplies can be used. If the environment requires special
protection against moisture or even protection against submersion, the selection of IP64, IP65 or IP67 power supplies can be
used depending on the environment. All of the IP65 and IP67 Power Supplies are SELV equivalent and can be used if SELV
equivalent power supplies are required.
L
N
230 V AC
Power Supply
24 V DC
-
+
Cable X
liniLED® Cable 1 m
Visualisation cable calculation
Datasheet liniLED® Top Power - Colour
LED strip
4
03-04-2017
Datasheet
Cable selection
The liniLED® LED strips need a minimum voltage at the beginning of the LED strip to function according to the specifications.
The table below gives an indication of the maximum cable length based on the cable thickness and power supply voltage.
The connection between the cable and LED strip is with a liniLED® Top connector with a cable length of 1m (Product code: 11200).
In case the required length is larger than the length mentioned in this table, the supply voltage is different or if a detailed wire plan
with branches is planned, please contact your distributor for a detailed cable calculation.
Cable X
information
LED strip
length
Max. cable length
Red & Amber
Max. cable length
Green
Max. cable length
Blue
@ 24 V DC
@ 25 V DC
@ 24 V DC
@ 25 V DC
@ 24 V DC
@ 25 V DC
liniLED® cable
(2 x 0.50 mm2)
0.035 Ω/m
1m
5m
10 m
36.05 m
6.18 m
2.44 m
70.40 m
13.05 m
5.88 m
61.96 m
11.36 m
5.04 m
120.15 m
23.00 m
10.85 m
41.75 m
7.32 m
3.02 m
81.36 m
15.24 m
6.98 m
2 x 0.75 mm2
0.023 Ω/m
1m
5m
10 m
54.23 m
9.30 m
3.68 m
105.91 m
19.63 m
8.85 m
93.21 m
17.09 m
7.58 m
180.74 m
34.60 m
16.33 m
62.81 m
11.01 m
4.54 m
122.38 m
22.93 m
10.50 m
2 x 1.00 mm2
0.018 Ω/m
1m
5m
10 m
72.11 m
12.36 m
4.89 m
140.81 m
26.10 m
11.77 m
123.92 m
22.73 m
10.08 m
240.30 m
46.00 m
21.71 m
83.51 m
14.64 m
6.04 m
162.72 m
30.48 m
13.96 m
2 x 1.50 mm2
0.012 Ω/m
1m
5m
10 m
108.47 m
18.60 m
7.37 m
211.82 m
39.27 m
17.70 m
186.42 m
34.19 m
15.16 m
361.48 m
69.20 m
32.67 m
125.63 m
22.03 m
9.08 m
244.77 m
45.86 m
21.00 m
2 x 2.50 mm2
0.007 Ω/m
1m
5m
10 m
180.53 m
30.96 m
12.26 m
352.53 m
65.36 m
29.46 m
310.26 m
56.90 m
25.23 m
601.61 m
115.18 m
54.37 m
209.09 m
36.67 m
15.12 m
407.38 m
76.33 m
34.95 m
Datasheet liniLED® Top Power - Colour
LED strip
5
03-04-2017
Datasheet
Maximum cable length
Red & Amber
Maximum cable length @ 25 V DC
512,00 m
512,00 m
256,00 m
256,00 m
128,00 m
128,00 m
Maximum cable length
Maximum cable length
Maximum cable length @ 24 V DC
64,00 m
32,00 m
16,00 m
64,00 m
2 x 2.50 mm2
2 x 2.50 mm2
32,00 m
2 x 1.50 mm2
2 x 1.50 mm2
2 x 1.00 mm2
2 x 1.00 mm2
2 x 0.75 mm2
16,00 m
2 x 0.75 mm2
liniLED® cable
liniLED® cable
8,00 m
8,00 m
4,00 m
4,00 m
2,00 m
2,00 m
1,00 m
0,00 m
1,00 m
2,00 m
3,00 m
4,00 m
5,00 m
6,00 m
7,00 m
8,00 m
9,00 m
1,00 m
0,00 m
10,00 m
1,00 m
2,00 m
3,00 m
4,00 m
LED strip length
5,00 m
6,00 m
7,00 m
8,00 m
9,00 m
10,00 m
LED strip length
Green
Maximum cable length @ 25 V DC
512,00 m
512,00 m
256,00 m
256,00 m
128,00 m
128,00 m
Maximum cable length
Maximum cable length
Maximum cable length @ 24 V DC
64,00 m
32,00 m
16,00 m
64,00 m
2 x 2.50 mm2
2 x 2.50 mm2
2 x 1.50 mm2
32,00 m
2 x 1.50 mm2
2 x 1.00 mm2
2 x 1.00 mm2
2 x 0.75 mm2
16,00 m
liniLED® cable
2 x 0.75 mm2
8,00 m
8,00 m
4,00 m
4,00 m
2,00 m
2,00 m
1,00 m
0,00 m
1,00 m
2,00 m
3,00 m
4,00 m
5,00 m
6,00 m
7,00 m
8,00 m
9,00 m
1,00 m
0,00 m
10,00 m
liniLED® cable
1,00 m
2,00 m
3,00 m
4,00 m
LED strip length
5,00 m
6,00 m
7,00 m
8,00 m
9,00 m
10,00 m
LED strip length
Blue
Maximum cable length @ 25 V DC
512,00 m
512,00 m
256,00 m
256,00 m
128,00 m
128,00 m
Maximum cable length
Maximum cable length
Maximum cable length @ 24 V DC
64,00 m
32,00 m
16,00 m
64,00 m
2 x 2.50 mm2
2 x 2.50 mm2
2 x 1.50 mm2
32,00 m
2 x 1.50 mm2
2 x 1.00 mm2
2 x 1.00 mm2
2 x 0.75 mm2
16,00 m
liniLED® cable
2 x 0.75 mm2
8,00 m
8,00 m
4,00 m
4,00 m
2,00 m
2,00 m
1,00 m
0,00 m
1,00 m
2,00 m
3,00 m
4,00 m
5,00 m
6,00 m
7,00 m
8,00 m
9,00 m
1,00 m
0,00 m
10,00 m
LED strip length
Datasheet liniLED® Top Power - Colour
LED strip
liniLED® cable
1,00 m
2,00 m
3,00 m
4,00 m
5,00 m
6,00 m
7,00 m
8,00 m
9,00 m
10,00 m
LED strip length
6
03-04-2017
Datasheet
Connection diagram
The LED strip can be connected with a connector set as shown in the diagram.
L
N
liniLED®
Control
230 V AC
11120
Power Supply
24 V DC
-
+
IP40
11200
IP40
11326
11506
IP68
11208
Datasheet liniLED® Top Power - Colour
LED strip
7
03-04-2017
Datasheet
Symbols
Manufacturer’s declaration that the product meets the applicable EC directives.
F
GLOW WIRE
850 °C
RoHS
IP40/IP68
Suitable for mounting on all surfaces and suitable to cover with insulating material.
Passed glow wire test at 850 degrees Celsius.
Global European regulations specify 650 degrees Celsius by default.
Restriction of Hazardous Substances (RoHS): product complies with the RoHS directive and each
homogeneous material does not exceed the limits for the materials mentioned under the RoHS
directive (Pb, Hg, Cd, Cr6+, PBB and PBDE).
IP68 in combination with the liniLED® Top Connector Set and the liniLED® IP68 Kit, otherwise IP40.
Protected against impact energy of 5 joules.
IK08
Bending of the LED strip is possible with a radius of ≥ 30 millimetres in the specified direction.
R
30 mm
BEND RADIUS
Electrical appliance class III: this product is designed to be supplied from an extra-low voltage
(≤ 60.0 V DC or ≤ 42.4 V AC).
Product is resistant against ultraviolet (UV) light or sunlight.
Non-UV resistant products can degrade or discolor fast when exposed to UV light.
UV RESISTANT
Product can be cleaned with normal cleaning agents as specified under ‘LED strip extrusion resistance’.
CLEANING AGENTS
RESISTANT
This product can be stored and used below 0 degrees Celsius. Verify the minimum storage and
operation temperature under ‘Product characteristics’ for the lowest temperature allowed.
FROST
RESISTANT
This product can be applied in seawater and its environment. Elements in seawater will have no harmful effect on the
product. For chemical specifications see ‘LED strip chemical resistance’. Verify the IP rating for proper use.
SEA WATER
RESISTANT
SWIMMING POOL
ENVIRONMENT
This product can be applied inside swimming pools and their environment. Elements in the water -for water treatment- will have no harmful effect on the product. For chemical specifications of these elements ‘LED strip chemical
resistance’. Verify the IP rating for proper use.
This product needs to be disposed or separated from normal household waste so it can be recycled.
Disclaimer
The published information is checked to be as accurate as possible, however Triolight B.V., or any reseller of liniLED® cannot be held liable for any
damages resulting from errors or outdated information. Triolight B.V. reserves the right to modify the information without informing the costumers.
When this document is printed or downloaded, please check for the latest version on the internet, the most up to date information will be published
on www.liniLED.com. This product should not be used in applications, devices or systems where incorrect operation of the product may result in
personal injury (includes emergency lighting) without written permission from the board of Triolight B.V.. If nevertheless used in such applications,
devices or systems Triolight B.V. cannot be held liable for any resulting injury.
Datasheet liniLED® Top Power - Colour
LED strip
8
03-04-2017