Samsung MWR-WE10 Product specifications

Wired Remote Control
Basic :MWR-WE00
Model :MWR-WE10
Model Code : MWR-WE10
WIRED REMOTE CONTROL
CONTENTS
1. Precautions
2. Product Specifications
3. Disassembly and Reassembly
4. Troubleshooting
5. Exploded Views and Parts List
6. PCB Diagram
MWR-WE10
7. Wiring Diagram
8. Schematic Diagram
Refer to the service manual in the GSPN(see the rear cover) for the more information.
유선리모컨_MWR-WE10_E_33320A(1)_co.indd 1
2010-12-23 오후 5:50:29
Operating Instructions and Installation
Contents
1. Precautions ......................................................................................................................................... 1-1
1-1 Precautions for the Service .............................................................................................................. 1-1
1-2 Precautions for the Safety . .............................................................................................................. 1-1
2. Product Specifications ................................................................................................................ 2-1
2-1The Feature of Product . ................................................................................................................... 2-1
2-1-1 Features .................................................................................................................................... 2-1
2-1-2 Basic Product Preparation Changes .................................................................................... 2-2
2-2Product Structure .............................................................................................................................. 2-3
2-3Product Specifications ...................................................................................................................... 2-3
2-3-1 Environment of Usage . .......................................................................................................... 2-3
2-3-2 Functional Development Specifications . ........................................................................... 2-4
2-4Installation Method . ......................................................................................................................... 2-13
2-4-1 Wired Remote Control Installation ...................................................................................... 2-13
2-4-2 Tracking Your Indoor Unit from the Wired Remote Controller ...................................... 2-15
2-5Optional Materials Specifications ................................................................................................... 2-16
2-5-1 Accessories ............................................................................................................................... 2-16
3. Disassembly and Reassembly .................................................................................................... 3-1
4. Troubleshooting .................................................................................................................................. 4-1
4-1Checklist before Diagnosis .............................................................................................................. 4-1
4-1-1 Wired Remote Control Error Codes ..................................................................................... 4-1
4-1-2 Wired Remote Control Error List . ......................................................................................... 4-2
4-2Troubleshooting by Condition ....................................................................................................... 4-3
4-2-1 LCD Display Does Not Appear .............................................................................................. 4-3
4-2-2 Communication Error or Malfunction ................................................................................. 4-4
4-3How to Download Micom Software . ............................................................................................. 4-5
4-3-1 Micom Software Upgrade Kit . .............................................................................................. 4-5
4-3-2 Upgrade Kit Switch setting . .................................................................................................. 4-5
4-3-3 Micom Software Upgrading Order ...................................................................................... 4-6
5. Exploded Views and Parts List ................................................................................................... 5-1
6. PCB Diagram . ......................................................................................................................................... 6-1
7. Wiring Diagram .................................................................................................................................... 7-1
8. Schematic Diagram . .......................................................................................................................... 8-1
Samsung Electronics
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 1
1
2010-12-23 오후 5:51:07
1. Precautions
1-1 Precautions for the Service
●Use the standard parts when replacing the electric parts.
- Confirm the model name, rated voltage, rated current of the electric parts.
● Repair the disconnection of HARNESS securely when repairing the break down.
- If there is any connection error, it causes an abnormal noise and incorrect operation.
● In case that you assemble or disassemble the products with laying it on the side, do work on the work cloth.
- If not, the exterior of products can be scratched.
●Remove dust and foreign materials from harness, connection part, and inspection part thoroughly when repairing the
break down.
- It protects the danger of fire such as tracking and short.
● Check the assembly status of parts after repairing the break down.
- It should be same as the status before repairing.
1-2 Precautions for the Safety
● Do not pull any electric wires and do not touch an auxiliary power switch with a wet hand.
- There is a danger of electric shock or fire.
● In case any wire or power plug has been damaged, replace it to eliminate any possible danger.
● Do not bend the power cord by force and do not put any heavy object on the power cord.
- There is a danger of electric shock or fire.
● Ground the product if necessary.
- Be sure to ground the product if there is any danger of electric leakage due to water or moisture.
● Be sure to turn off the auxiliary power switch or pull out the power plug during replacement or repair of electric parts.
- There is a danger of electric shock.
1-1
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 1
Samsung Electronics
2010-12-23 오후 5:51:07
2. Product Specifications
2-1 The Feature of Product
2-1-1 Features
 After 11 years, the introduction of the new technology used in the new products required the development of the
control part.
– Global 4Way : 4-directional individual control, sensors that detect human presence, automatic cleaning and S-Plasma ion, etc.
– ERV PLUS, AHU : Humidification, supply of outside air and clean-up, etc.
 Integrated control between systems is necessary due to the growth in the market for ventilation products.
– Remote control integrated between the air conditioner and ERV products is necessary.
– Energy saving is realized through interlocking control.
Master wired remote control
Slave wired remote control
∙∙∙
A maximum of two wired remote controls
can be connected; these can be controlled as
one group. (Master/Slave)
1) PBA: Main PBA
– SAMSUING 3F4A1HJZZ
– FRAM
– COB TYPE FSTN LCD
– Misconnection prevention relay applied
– Diode for button multiple recognitions applied
2) Application S/W
– Basic control
– Schedule control
– Error display
– Individual control of indoor unit
– ERV individual control
– Integrated control of indoor unit and ERV
– Energy Saving function
3) Product materials: Box, Label, Manual
Samsung Electronics
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 1
A maximum of 16 “indoor units and ERV” can
be connected to the wired remote control as
one group and controlled.
2-1
2010-12-23 오후 5:51:08
Product Specifications
2-1-2 Basic Product Preparation Changes
Item
Basic Model (MWR-WE00)
Model made (MWR-WE10)
Changes
Ass'y Case
New Equipment
- New hinge
(Hinge used in folder-type
mobile phones)
- New TOP/BOTTOM/DOOR
- Addition of door button part
Ass'y PCB
New MAIN PBA
- Communication/power
terminal B/L
- Electrolytic CAP SMD type
- Display connector connected
Ass'y LCD
New Display
- Application of display
communicating IC to expand
the segment
- Separate development of
LCD PBA including backlight
Other
1) Development of new inlay
2) Review of new labels (Option, Door and Box)
3) New User/Installation/Service manuals
4) Application of display communicating method with the application of display IC
5) Compatibility of newly developed set
- Global 4Way, ERV Plus and AHU, etc.
6) New addition of User Mode/Service Mode (many)
7) Software for OPTION function
8) Changing daytime reservation function
2-2
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 2
Samsung Electronics
2010-12-23 오후 5:51:09
2-2 Product Structure
External Dimensions
(Unit: mm)
19.5
63.8
124.0
120.0
2-3 Product Specifications
2-3-1 Environment of Usage
Classification
No
Item
Standard
Remarks
Refer to user
guide
1
Region
Domestic
2
Form
Wall-hanging, air conditioner indoor unit remote control equipment
3
Parts supply
Inquiries to Service Center
1
Standard temperature
and humidity
15 ~ 25°C , 35 ~ 65 %
2
Temperature for usage
0°C ~ 40°C (Indoor usage)
3
Humidity for usage
Humidity 30%RH ~ 90%RH (conditional to no condensation)
Power
1
Input
12VDC/500mA
Installation
2
Installation space
Installing on the wall using the exclusive install bracket
1
Opening
Conform to the appointed order
Confirmation of delivery
• Confirm with the delivery check sheet, and repair faulty items.
• Follow the method, usage conditions, and notices according to
the user guide. When a problem occurs during this process,
it supported by places that can provide these services.
General Conditions
Installation
Conditions
Delivery
2
Installation Method
1
- Refer to the Installation guide.
Other
1
- You must refer to Installation guide and User guide.
Samsung Electronics
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 3
2-3
2010-12-23 오후 5:51:09
Product Specifications
2-3-2 Functional Development Specifications
Display
④
⑤ ⑨⑩
⑪
⑫⑬
⑭
①
②
⑮
③
⑯
⑰
⑱
⑥
⑦
⑧


⑳ ⑲
LED Indicator
(Green : Normal / Red : Need to be checked)
Operation On/Off button
Temperature Setting Button
●Without opening the cover of your Wired Remote Controller, you can turn the air-conditioner
power On/Off or set the desired temperature.
2-4
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 4
Samsung Electronics
2010-12-23 오후 5:51:10
Product Specifications
Functional Development Specifications (cont.)
Display (cont.)
Classification
Air Conditioner
Related Information
Schedule related
information
Ventilator
(ERV) related
information
Commom function
related information
Samsung Electronics
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 5
Indication
Function
①
Displays Air conditioner operation
②
Displays Quiet/Sleep operation
③
Displays Indoor temperature/Set temperature
④
Displays discharge temperature control
⑤
Displays CO2 /power consumption
⑥
Displays AC fan speed
⑦
Displays Blade selection
⑧
Displays Air swing(Up/Dn)
⑨
Weekly schedule/Holiday setting displays
⑩
Displays Current day() or scheduled day(_)
⑪
Displays Schedule number
⑫
Displays Scheduled device selection
⑬
Displays Current time/summer time/scheduled time
⑭
Displays Ventilator(ERV) operation
⑮
Displays Clean up
⑯
Displays Ventilator(ERV) fan speed
⑰
Displays Invalid operation /Filter cleaning (filter cleaning period)
⑱
Displays Dust box cleaning alert/check/partial locking/full
locking
⑲
Displays occupancy detection/Exhaust hood/External
interconnection control/Auto clean/ Humidifying/Energy
saving/Outdoor air supply intake/
Centralized control
⑳
Displays S-Plasma Ion

Displays Indoor CO2 density

Displays Indoor humidity
2-5
2010-12-23 오후 5:51:12
Product Specifications
Functional Development Specifications (cont.)
Buttons
⑫
⑨
⑧
①
②
⑱
⑬

⑮

⑳

③
⑤
⑥
⑦

④ ⑪ ⑩ ⑯⑲ ⑭
Classification
Air Conditioner
Related
Information
Button
⑰


Function
①
Operation On/Off button
②
Mode button
③
Temperature setting button
④
Fan speed button
Changes the air conditioner’s fan speed
⑤
Air Swing button
Changes the air flow direction to move upward or downward
⑥
Temp. button
⑦
Quiet/Sleep button
2-6
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 6
Turns the air conditioner power On/Off
Selects the desired air conditioner operation
Sets the desired temperature
Checks the indoor temperature
Selects Quiet or Sleep operation for the air conditioner
Samsung Electronics
2010-12-23 오후 5:51:13
Product Specifications
Functional Development Specifications (cont.)
Buttons (cont.)
Classification
Air Conditioner
Related
Information
Special
Function
Displays
Ventilator
(ERV) Related
Buttons
Button
Function
⑧
Humidity button
⑨
Blade button
⑩
Occupancy detection button
⑪
Outdoor air intake
⑫
Schedule Button
Select the schedule setting function
⑬
User Set Button
Select the detailed setting function
⑭
Navigational buttons
⑮
Set button
Save your new settings
⑯
ESC button
Return to general mode from schedule and detailed setting
screens
⑰
Delete button
⑱
Auto Clean button
Use the auto cleaning function for your air conditioner
⑲
CO2/[kWh] button
Display the amount of CO2 and the power consumption
⑳
Filter Reset button
Turn off the filter cleaning displays (filter using time reset)

S-Plasma Ion button

Operation On/Off button

Mode button

Fan speed button

E.Saver button
Begin Energy Saving Operation

Clean up button
Select air purification through the in/out load controls
Samsung Electronics
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 7
Turns the AHU humidifying function On/Off
Selects a blade for individual control
Set the power to automatically turn off if there is nobody in the
room
Select the AHU Outdoor intake function
Move between items or change the item value
Cancel the schedule setting
Choose the S-Plasma Ion function
Turn the Ventilator(ERV) On/Off
Select the desired operation for the Ventilator(ERV)
Change the fan speed for your Ventilator(ERV)
2-7
2010-12-23 오후 5:51:14
Product Specifications
Functional Development Specifications (cont.)
Detailed Settings (User Settings)
SEG Used
Main Menu Sub Menu
1 2 34
5 6
1. If you want to set the detailed settings, press the User Set button.
 You will enter the User Set mode, and the [Main Menu] will be displayed.
2. Refer to the Wired Remote Controller’s User Set list on the next page to select the desired menu.
 Using the [∧]/[∨] buttons, select a main menu number and press the [>] button to enter the sub-menu setting screen.
 Using the [∧]/[∨] buttons, select a sub-menu number and press the [>] button to enter the data setting screen.
 Once you have entered the setting screen, the current setting will be displayed.
 Refer to the chart for data setting.
 Using the [∧]/[∨] buttons, change the settings and press the [>] button to move to the next setting.
 Press the Set button to save the setting and exit to the sub-menu setting screen.
 Press the Esc button to exit to general mode.
●While setting the data, you can use the [>]/[<] buttons to set the range of SEG used.
●While configuring the setting, press the Esc button to exit to the sub-menu setting screen without saving the setting.
2-8
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 8
Samsung Electronics
2010-12-23 오후 5:51:15
Product Specifications
Functional Development Specifications (cont.)
Detailed Settings (User Settings) (cont.)
Main Sub
Menu menu
Functions
SEG Used
Default
Range
Unit
Auto stop
1
0
0~12 hours
1 hour
Lower Limit
1,2
16(61)
16~30°C (61~86°F)
1°C(1°F)
Upper Limit
3,4
30(86)
18~30°C (65~86°F)
1°C(1°F)
1
0
0-Unlock, 1-Lock
-
Lock of Operation
On/Off button
2
0
0-Unlock, 1-Lock
-
Lock of operation
selection button
3
0
0-Unlock, 1-Lock
-
Lock of temperature
setting button
4
0
0-Unlock, 1-Lock
-
Lock of fan speed button
5
0
0-Unlock, 1-Lock
-
Lock of schedule setting
button
6
0
0-Unlock, 1-Lock
-
1
2
Temp limits [°C(°F)]
All locking
3
4
5
Lock of partial button
1
Current Temperature Setting (Year, Month, Date)
1,2/3,4/5,6
10/01/01
00~99/1~12/1~31
YY,MM,DD
2
Current Time Setting (Day, Hour, Minute)
Day/AM/
PM/1,2/3,4
Friday/
PM/12/00
Sun~Sat/
AM~PM/0~12/0~59
Day, hour,
minute
Use of summer time (Y/N)
Summer Time Use
and Setting Methods Summer Time Application
Method
1
0
0-No use, 1-Use
-
1
2
0
0- Weekly,1- Daily
-
2
Summer time use (Weekly)
Start (? Month, ? th Sunday)
1,2/4
03/F
1~12th month/
1~4,F (last week)th week
-
3
Summer time use (Weekly)
End (? Month, ? th Sunday)
1,2/4
10/F
1~12 month/
1~4,F (last week)th week
-
4
Summer time use (Daily)
Start (? Month, ? th Sunday)
1,2/3,4
03/22
Jan~Dec/1~31st day
Month, date
5
Summer time use (Daily)
End (? Month, ? th Sunday)
1,2/3,4
09/22
Jan~Dec/1~31st day
Month, date
Backlight Time Setting/Checking
1,2
5
0~30 sec
1 sec
Use of LED(Green) (Y/N)
3
1
0-No use, 1-Use
-
Use of LED (Red) (Y/N)
4
1
0-No use, 1-Use
-
Ventilator(ERV) Delay
Application (Y/N)
1
0
0-No use, 1-Use
-
Delay Time
3,4
30
30~60 minutes
1 minute
1
0
0-No use, 1-Reset
-
6
7
Ventilator(ERV)
Delay Time
Setting/Checking
0
Samsung Electronics
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 9
Reset to user mode defaults
(except the current time)
2-9
2010-12-23 오후 5:51:15
Product Specifications
Functional Development Specifications (cont.)
Installation/Service Modes
Data bit
Main Menu Sub Menu
1 2 34
5 6
1.If you want to use the various additional functions for your Wired Remote Controller, press the Set and Esc buttons
at the same time for more than three seconds.
 You will enter the additional function settings, and the [main menu] will be displayed.
2.Refer to the list of additional functions for your Wired Remote Controller on the next page, and select the desired
menu.
sing the [∧]/[∨] buttons, select a main menu number and press the [>] button to enter the sub-menu setting screen.
U
sing the [∧]/[∨] buttons, select a sub-menu number and press the [>] button to enter data setting screen.
U
 When you enter the setting stage, the current setting will be displayed.
 R efer to the chart for data settings.
sing the [∧]/[∨] buttons, select the settings. Press the [>] button to move to the next setting.
U
 P ress the Set button to save the settings and exit to the sub-menu setting screen.
 P ress the Esc button to exit to normal mode.
●While setting the data, you can use the [<]/[>] buttons to set the range of Data bit.
●While configuring the setting, press the Esc button to exit to the setting sub-menu without saving your changes.
2-10
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 10
Samsung Electronics
2010-12-23 오후 5:51:15
Product Specifications
Functional Development Specifications (cont.)
Installation/Service Modes (cont.)
●If your indoor machine does not support the setting mode, then you may not be able to edit the settings or apply your changes.
Main
menu
Sub
menu
1
2
Wireless remote controller Option
setting/checking (1)
5
6
ERV option
Setting/checking
Room Temperature compensation
Number of connected units
7
2
3
0
0 – Cooling/Heating,
1 – Cooling only
-
Use of wireless remote controller
2
1
0 – No use, 0 - Use
-
MAIN/SUB wired remote controller
3
0
0 –MAIN, 1- SUB
-
Temperature unit
4
0
0 – Celcius(°C), 1 – Fahrenheit(°F)
-
Temperature sensor selection
1
0
0 – Indoor unit,
1 – Wired remote controller
Use of average temperature
2
0
0 – No use, 0 - Use
-
Use of Auto mode
3
1
0 – No use, 0 - Use
-
Temperature display
4
0
0 – Set temperature,
1 - Room temperature
AC On/Off button function
5
0
0 – Indoor unit + ERV,
1 – Indoor unit only,
2 – ERV only,
-
Lock of Blade1
1
0
0 – Unlock, 1 – lock
-
Lock of Blade2
2
0
0 – Unlock, 1 – lock
-
Lock of Blade3
3
0
0 – Unlock, 1 – lock
-
Lock of Blade4
4
0
0 – Unlock, 1 – lock
-
Use of By-Pass mode
1
0
0 – No use, 1 - Use
-
Use of Auto mode
2
0
0 – No use, 1 - Use
-
Use of air purification mode
3
0
0 – No use, 1 - Use
-
Use of external control
4
0
0 – No use, 1 - Use
-
Temperature control reference
1,2,3
0
-9 ~ 40(°C)
0.1(°C)
Temperature compensation value
4,5,6
0
-9.9 ~ 9.9(°C)
0.1(°C)
Number of indoor units
1,2
-
0 ~ 16
-
Number of ERVs
3,4
-
0 ~ 16
-
1
0
0-1°C, 1-0.5°C, 2-0.1°C
-
0 – Unchanged
1 – Factory setting
-
Temperature increment/decrement (°C only)
0
Unit
1
Blade
setting/checking
3
Description
Cooling/Heating selection
Wireless remote controller Option
setting/checking (2)
1
4
Data Factory
bit setting
Function
Factory option setting
1
0
1
Software code
1~6
-
Software code
-
2
Software version
1~6
-
Software version
-
1
Indoor unit room temperature
1,2,3
-
Room temperature
°C
2
Indoor unit EVA IN temperature
1,2,3
-
EVA IN temperature
°C
3
Indoor unit EVA OUT temperature
1,2,3
-
EVA OUT temperature
°C
4
Indoor unit EEV step
5
6
Indoor unit option checking (1)
Indoor unit option checking (2)
Samsung Electronics
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 11
1,2,3
-
EEV step
-
Use of central control
1
-
0 – No use, 1 - Use
-
Use of drain pump
2
-
0 – No use, 1 - Use
-
Use of electric heater
3
-
0 – No use, 1 - Use
-
Use of hot water coil
4
-
0 – No use, 1 - Use
-
Use of external control
1
-
0 – No use, 1 - Use
-
Use of RPM compensation
2
-
0 – No use, 1 - Use
-
Filter time
3
-
0 – 2000 hours, 1 – 1000 hours
-
Heating temperature compensation
4
-
0-2°C, 1-5°C
-
EEV stop step in heating
5
-
0 – 1/80 steps, 1 – 80
-
2-11
2010-12-23 오후 5:51:15
Product Specifications
Functional Development Specifications (cont.)
Installation/Service Modes (cont.)
Main
menu
Sub
menu
Main address (0~63)
Main address (0~63)
RMC address (00H~2FH)
Indoor unit option code (24 bits)
Refer to the indoor unit installation
manual for details
-
2
-
3
Indoor unit option switch setting/checking
1)*
-
1,2
-
0~30
1
3,4
-
1 RPM
5
-
6
-
0~25
0 – Pre
1 – Medium performance
2 –High performance
0 – 30, 1 - 40, 2 - 50
1
-
0 – No use, 1 - Use
-
3,4
5,6
1,2
3,4
1
-
10 ~25°C
28 ~43°C
13~25
18~30
0 – No use, 1 - Use
1°C
1°C
1°C
1°C
-
2
-
0 – No use, 1 - Use
-
3
4
1,2
3,4
1,2
3,4
-
0 – No use, 1 - Use
0 – No use, 1 - Use
15~30°C
15~30°C
15~30°C
5~15°C
1°C
1°C
1°C
1°C
1,2
-
0~10°C
1°C
3,4
-
1,2
3,4
1
-
1
AHU setting/checking
filter performance
5
2
3
1
2
3
4
5
0
Unit
1,2
3,4
5,6
1)*
Setting/checking the
differential value
RPM setting/checking
6
Description
Indoor unit main address checking
Indoor unit main address setting (outdoor unit reset is needed to set)
Indoor unit RMC address setting/checking
Indoor unit option code setting/checking
1
4
Data Factory
bit setting
Function
humidity setting/checking
Use of discharge
temperature control
AHU discharge temperature setting/
checking
Cooling discharge temperature
Heating discharge temperature
Cooling discharge temperature
Fresh Duct discharge temperature
checking
Heating discharge temperature
Use of cold air prevention
Use of humidification when Heating
thermo off
ERV Plus setting/checking
Use of fan operation in Defrost
Use of humidification when Heating
Cooling
ERV Plus temperature
setting/checking
Heating
Set temperature
ERV Plus Auto mode temperature setting/
checking
Set temperature difference
Setting/checking the compensating temperature A under the Heating
EEV control for ERV Plus
Checking the compensating temperature B under the Heating
EEV control for ERV Plus
Air supply RPM
ERV Plus fan RPM setting/checking
Air exhaustion RPM
Factory setting
0 – Non use of humidifier(0°C)
1 – Use humidifier(10°C)
10~27 RPM
10~27 RPM
0 – No use, 1– Factory setting
-
-
1 RPM
1 RPM
-
1)* Data1 is the option setting page. / Data2~6 stand for the option codes.
Option Setting Page
Option Code
12 34 56
You can set the 24 digits options.
Page
PAGE 1
PAGE 2
PAGE 3
Option Settings
1st~5th digit option setting
6th~10th digit option setting
11th~15th digit option setting
How to Move Between Pages
Press the [>] button to go to PAGE 2.
Press the [>] button to go to PAGE 3.
Press the [>] button to go to PAGE 4.
Page
PAGE 4
PAGE 5
Option Settings
16th~20th digit option setting
21th~24th digit option setting
How to Move Between Pages
Press the [>] button to go to PAGE 5.
-
 Regardless of Celsius and Fahrenheit setting, service mode setting is available only with Celsius.
 Maximum no. of Connections: A maximum of 16 "indoor units + ERV" can be connected.
 Separate control between indoor unit and ventilation system (ERV) is possible.
 Integrated control between indoor unit and ventilation system (ERV) is possible.
2-12
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 12
Samsung Electronics
2010-12-23 오후 5:51:16
2-4 Installation Method
2-4-1 Wired Remote Control Installation
1.Push the two hooks at the bottom of your Wired Remote Controller at the same time, and then pull up the front
cover to separate it from the rear cover.
 Push the two hooks at the same time.
●Insert a flat head screwdriver into the square groove in the upper
area of the hook to disassemble it easily.
2.Arrange the power cable and the communication cable so that they fit in the housing along the edges of the
rear cover.
If you need more space for the
wiring work, you can take it off.
15cm
10cm
<When the cable is not concealed>
Samsung Electronics
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 13
<When the cable is concealed>
2-13
2010-12-23 오후 5:51:16
Product Specifications
Wired Remote Control Installation (cont.)
3.Using more than two screws, firmly affix the rear cover of the remote controller to the wall, and then connect
the power(V1, V2) and communication cables(F3, F4), making sure these cables have reasonable length,
to the terminal at the back of the cover.
10mm or more
10mm or more
Indoor unit
10mm or more
Wire (not supplied)
Screw hole
Wired Remote
Controller
50mm or more
PCB terminal
Rear cover
 Before fixing the rear cover, secure at least  You must fit the screws into
10mm space of upper side, left side,
the screw holes.
right side, and 50mm space of bottom side.
Front cover
 Do not tighten the screws on the
PCB terminal with excessive force.
4. Reassemble your Wired Remote Controller.
●Align the controller with the upper groove first, and insert it by turning it downward as shown
in the figure.
After assembly, check and confirm that no wires are stuck in the gap between the rear and
front cover.
●When installing a Wired Remote Controller by using a cable longer than 10m, you must install the communication cable and the power
cable separatery. (Electrical interference can cause your Wired Remote Controller to malfunction.)
●When installing your Wired Remote Controller on the wall, consider the size of the wire hole, and select a wire with a proper thickness.
●Wire that is connectable to Wired Remote Controller PCB.
- If you install the Wired Remote Controller by reclaiming, install it according to U-terminal cable specification.
- If you install the Wired Remote Controller by using four pieces of PVC wire, remove the 30cm of the sheath of the cable and install
it only with the four pieces of wires. (Recommended specification: AWG21)
●The following are the specs of the compression ring terminal connected to your Wired Remote Controller PCB.
Rated
Size
Stud
Size
AWG
mm2
mm2
mm
t
øD
G
E
F
W
L
22~16
0.25~1.65
1.5
3
0.7
3.8
10.0
4.5
6.5
6.0
21.2
Range of Permitted Wires
E
W
Stud
D
F
G
L
Basic Size (mm)
 Maximum distance for connecting communication and power cable: 100m
t
●Screws on the PCB terminal must be tightened with less than 6N-cm tightening torque. If the tightening torque is greater, it may damage
the screw thread.
2-14
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 14
Samsung Electronics
2010-12-23 오후 5:51:17
Product Specifications
2-4-2 Tracking Your Indoor Unit from the Wired Remote Controller
Indicates tracking in
progress
Displays the total number of
units searched
1. Tracking of your Wired Remote Controller will automatically start when you turn on the power after installation.
2.If you want to perform tracking again after installation, then press the Esc and Delete buttons at the same time for
more than five seconds.
●The system will reset, and tracking will start again.
3. During tracking, the total number of currently searched indoor units and ventilator(ERV) will be displayed.
●If you want to perform tracking again after installation, then press the Esc and Delete buttons at the same time for more than five
seconds.
●Only the master Wired Remote Controller can display the total number of indoor units and ventilator(ERV).
- Slave Wired Remote Controllers do not display the total number of units.
Samsung Electronics
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 15
2-15
2010-12-23 오후 5:51:17
2-5 Optional Materials Specifications
2-5-1 Accessories
Item
2-16
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 16
Description
Code No.
Q’ty
Wired remote control
DB93-11251B
1
Cable tie
DB65-10099B
2
Cable clamp
DB65-10074E
3
Cable clamp
6002-000474
5
User Manual
DB98-32810A
1
Installation Manual
DB98-32811A
1
U-terminal
DB60-00444A
6
Remark
Samsung Electronics
2010-12-23 오후 5:51:17
MEMO
Samsung Electronics
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 17
2-17
2010-12-23 오후 5:51:17
3. Disassembly and Reassembly
No
Image
Procedure
1
Push the2 fixing structures at the bottom inwards, and then
pull up the front cover to separate it from the rear cover.
(This step is easy when using a flathead screwdriver.)
When
assembling, assemble the upper part first as in the
picture, and then insert the bottom hook.
2
Separate the door cover by pushing the bottom-right part of
the product sideways.
For
assembling or dismantling, leave the door cover
open about 130 degrees as in the image to do the work.
Otherwise, the hinge may be incorrectly assembled,
resulting in faulty operation.
3-1
Samsung Electronics
3-1
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 1
2010-12-23 오후 5:51:18
Disassembly and Reassembly
No
Image
Procedure
3
Unscrew the 6 screws assembled in the front cover to separate
the PBA.
4
Separate the PCB cover and the LCD connector to detach the
PBA from the front cover.
5
Separate the attached rubber keypad.
Samsung Electronics
3-2
3-2
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 2
2010-12-23 오후 5:51:18
4. Troubleshooting
4-1 Checklist before Diagnosis
4-1-1 Wired Remote Control Error Codes
● The error codes of the wired remote control and the products connected to the remote are shown on the LCD display.
<LCD Display>
 Errors Found in Indoor Unit/Outdoor Unit (Product Group Indication: A)
The product address where the error has occurred and the occurred error code are indicated, displayed one after another.
Example) 101 error occurred in No. 28 indoor unit.
Indoor Unit
 Error Found in Wired Remote Control
The product address where the error is occurred and the occurred error code are indicated, displayed one after another.
Example) 121 error occurred in No. 28 ventilation system (ERV).
Ventilation system (ERV)
 Error Found in Wired Remote Control
Only the occurred error code is indicated. (No indication of the address where error occurred.)
Example) 601 error occurred in wired remote control.
4-1
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 1
Samsung Electronics
2010-12-23 오후 5:51:18
Troubleshooting
4-1-2 Wired Remote Control Error List
Error Display
Contents
Remark
Communication error between wired remote control ↔ indoor unit/ventilation system (ERV)
(When communication has stopped for 3 minutes after detecting indoor unit/ventilation system
(ERV) and wired remote control)
Communication error between wired remote control ↔ indoor unit/ventilation system (ERV)
(When communication has stopped for 3 minutes after detecting indoor unit/ventilation system
(ERV) and wired remote control)
Tracking 10 or more errors between wired remote control ↔ indoor unit/ventilation system (ERV)
- COM1, COM2 crossing connection error
- When wired remote control is connected to indoor unit COM1 (F1, F2) terminal
- Multiple master error
- Error occurred during installation when two wired remote controls are both set as masters in one
communication line (This is not possible to detect if the communication polarity is connected in
reversed polarity.)
When using master
remote control
Ventilation system (ERV) is not installed in case of outside gearing.
Can be connected
by both master and
slave wired remote
controls
Indoor unit is not installed in case of outside gearing (when the indoor unit is not detected after
outside gearing option setting and tracking are finished).
In case of using
outside gear control
- Exceeded maximum no. of installation for indoor unit/ventilation system (ERV) (16 equipment
devices)
- A reset is required after checking the number of indoor unit/ventilation system (ERV) installations
- Mixed installation error for °C/°F indoor unit
- Error occurs when mixed indoor units of °C and °F settings are installed
Only detected by the
master wired remote
control
- Wired remote control °C/°F setting error
- This error occurs if the indoor unit is set in °C while the wired remote control is set in °F or vice versa.
This error occurs when the option settings of the master and slave wired remote controls are
different from each other.
Slave wired remote control installation error (when two slave wired remote controls are installed)
Normal operation option setting error (when normal operation is selected with the wired remote
control for a ventilation system (ERV) that does not support the normal operation option)
Automatic operation option setting error (when automatic operation is selected with the wired
remote control for a ventilation system (ERV) that does not support the automatic operation option)
Temperature sensor open/short error
Only detected by
products with a
temperature sensor
- FRAM READ/WRITE error
- Damper error [error is detected when there is no input for 100 seconds (time for about 5
revolutions) during damper output]
●Please refer to the Installation guide of each equipment device for the error codes used for the indoor unit, the outdoor unit, and the
ventilation system (ERV).
Samsung Electronics
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 2
4-2
2010-12-23 오후 5:51:19
4-2 Troubleshooting by Condition
4-2-1 LCD Display Does Not Appear
Start
Is the connection of the
ASS'Y PBA (DB93-11243A)
power cable normal?
Check the connection status of the power
cable (V1, V2) with ASS'Y PBA (DB93-11243A).
No
Yes
Are the voltages for
both the terminals of BD01
input side12V?
No
Check the power of the indoor unit.
GND
12V(-12V)
Yes
No
Is the IC03 (7805) output terminal 5V?
Change 5V REGULATOR troubled ASS'Y PBA
(DB93-11243A).
GND
Yes
5V
Is the LCD connector
properly connected?
No
Change LCD WIRE
Yes
Change of LCD modules
Is it working normally after the change?
No
Change PCB_ASS'Y (DB93-11243A)
Yes
End
4-3
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 3
Samsung Electronics
2010-12-23 오후 5:51:19
Troubleshooting
4-2-2 Communication Error or Malfunction
Start
Is the ASS'Y PBA (DB93-11243A)
communication cable
properly connected?
No
Check the connection status of the
communication cable (F3, F4) and ASS'Y PBA
(DB93-11243A).
Yes
Is the resistance between
the 2 terminals of ASS'Y PBA (DB93-11243A)
C302 at least 200KΩ?
No
GND
200KΩ
Yes
Is the resistance between
the upper part of ASS'Y PBA (DB93-11243A)
C302 and GND at least 100KΩ?
Change ASS'Y PBA (DB93-11243A)
No
Change ASS'Y PBA (DB93-11243A)
GND
100KΩ
Yes
Is the resistance between
the lower part of ASS'Y PBA (DB93-11243A)
C302 and GND at least 100KΩ?
No
Change ASS'Y PBA (DB93-11243A)
GND
Yes
100KΩ
Check the communication of the indoor unit
connected to wired remote control (this is not a
problem with the wired remote control).
End
Samsung Electronics
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 4
4-4
2010-12-23 오후 5:51:20
4-3 How to Download Micom Software
4-3-1 Micom Software Upgrade Kit
G-man programmer
Power Cabel
Upgrade Kit
USB-RS232 Cable
4-3-2 Upgrade Kit Switch setting
Upgrade Kit switch
SW 3, 4, = OFF
SW 1, 2 = Don't care
SW 1, 2 = OFF
Indise switch
SW 1 position
SW 2 position
State
OFF
ON
If switch setting is wrong, then upgrading fails.
4-5
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 5
Samsung Electronics
2010-12-23 오후 5:51:20
Troubleshooting
4-3-3 Micom Software Upgrading Order
1) Connect the upgrade kit to the PCB download port.
3
1
① USB-RS232 Cable
② Power Cable
③ 10-pin flat cable
2
2) Set the G-man programmer (download program).
2
3
5
4
1. Only SoC software version from Mar. 14 2008 or later can be used.
2. Can't be upgraded with empty software in the Soc.
- Select a COM port and set the Baud rate at 115200bps.
- Select “Indoor.”
- Select the Micom software to download by pressing the "Select File" button.
- Start downloading by pressing the "Download” button.
Samsung Electronics
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 6
4-6
2010-12-23 오후 5:51:20
Troubleshooting
Micom Software Upgrading Order (cont.)
3) The download is successful if the “Successful” message appears with the upgrade status.
1
2
4) If the "Download has failed" message appears, then check the connection status and start again.
1
4-7
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 7
Samsung Electronics
2010-12-23 오후 5:51:21
Troubleshooting
Micom Software Upgrading Order (cont.)
5) Measures to Take if a “Trying to Connect” Message Repeatedly Appears
1
- Check if the connection is normal by pressing the “Check Connection” button.
1
2
2
6) Troubleshooting and Solution for Other Problems
- Bootloader of SOC Micom is damaged. → Change PCB.
- PBA is damaged. → Change PBA.
- Problem found in the upgrade kit. → Change the upgrade kit.
- Problem found in a cable (USB/Power/10-pin flat cable) → Change the relevant cable.
Samsung Electronics
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 8
4-8
2010-12-23 오후 5:51:21
5. Exploded Views and Parts List
2
7
6
3
5
1-6
4
1-1
1
1-7
1-2
1-3
1-4
1-5-4
1-5-1
1-5-3
1-5-2
1-5-5
1-5
5-1
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 1
Samsung Electronics
2010-12-23 오후 5:51:21
Exploded Views and Parts List
■ Parts List
Q'TY
SA/SNA
ASS'Y
1
SA
CASE-TOP
ABS
1
SNA
INLAY-BUTTON
PC
1
SNA
DB63-02816A
COVER-HINGE
ABS
1
SNA
1-4
DB61-04729A
HINGE-DOOR
STS304
1
SA
1-5
DB90-06127B
ASS'Y COVER-DOOR
ASS'Y
1
SA
1-5-1
DB63-02815A
COVER-DOOR
ABS
1
SNA
1-5-2
DB61-04671A
GUIDE-LED
PC
1
SNA
1-5-3
DB64-02600A
BUTTON-KEY
ABS
1
SNA
1-5-4
DB63-02840A
COVER-BUTTON
ABS
1
SNA
1-5-5
DB98-33083A
ASS'Y-DOOR LABEL
ART PAPER
1
SNA
1-6
DB64-02599A
WINDOW-DISPLAY
PC
1
SNA
1-7
DB02-00044A
TAPE ETC-PROTECTOR
PET
1
SNA
2
DB61-04652A
CASE-BOTTOM
ASS'Y
1
SA
3
DB93-11266B
ASS'Y DISPLAY-WE10
ASS'Y
1
SA
4
DB93-11243A
ASS'Y PCB MAIN-SOLUTION
ASS'Y
1
SA
5
DB64-02608B
BUTTON-RUBBER KEY
SILICON
1
SNA
6
DB63-02867A
COVER-PCB
ABS
1
SA
7
6001-001413
SCREW-MACHINE
M2,L5
6
SA
No.
Code No.
1
DB90-06126B
ASS'Y CASE-TOP
1-1
DB61-04651A
1-2
DB64-02627B
1-3
Samsung Electronics
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 2
Specification
Description
5-2
2010-12-23 오후 5:51:21
6. PCB Diagram
2
3
1
6
10
4
9
5
8
7
① MICOM
S3F4H Micro controller
② FRAM
EEPROM memory
③ Clock IC
Clock for scheduler
④ Relay
Prevents misconnection of
communication/power
⑤ 485 Communication part
485 Communication with indoor unit
⑥ Battery
Supply of power in the case of power
suspension for Clock IC
⑦ 5V Power
⑧ Doide
In charge of non-polar function for
power
⑨ Temperature sensor
⑩ LCD Control IC
6-1
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 1
Samsung Electronics
2010-12-23 오후 5:51:21
7. Wiring Diagram
Development
download connector
(ASPRO)
Communication
connector (485
communication)
Service download
connector
LCD connector
(backlight power
and LCD data I2C
communication)
Power connector
(12V)
Temperature sensor
connector
Samsung Electronics
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 1
7-1
2010-12-23 오후 5:51:21
8. Schematic Diagram
Power Circuit Part(DC12V)
Reset IC Part
485 Communication
Temp. Sensor Part
Download Part
EEPROM Part
Switch Part
This Document can not be used without Samsung’s authorization.
Samsung Electronics
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 1-2
2010-12-23 오후 5:52:04
GSPN(Global Service Partner Network)
Area
Web Site
North America
http://service.samsungportal.com
Latin America
http://latin.samsungportal.com
CIS
http://cis.samsungportal.com
Europe
http://europe.samsungportal.com
China
http://china.samsungportal.com
Asia
http://asia.samsungportal.com
Mideast & Africa
http://mea.samsungportal.com
This Service Manual is a property of Samsung Electronics Co., Ltd.
Any unauthorized use of Manual can be punished under applicable
International and/or domestic law.
유선리모컨_MWR-WE10_E_33320A(1)_co.indd 2
©Samsung Electronics Co., Ltd. Dec. 2010.
Printed in Korea.
Code No. DB98-33320A(1)
2010-12-23 오후 5:50:29