Model: PLED4274A
English
CONTENTS
1
SAFETY
PRECAUTION
1
2
IMPORTANT
SAFETY
INSTRUCTION
2
3
ACCESSORIES
3
4
GETTING
STARTED
3
5
CONTROL
REFERENCE
GUIDE
Remote Control
Front View
Back View
Side View
Antenna Connection
AV Connection
Y Pb Pr Connection
HDMI Connection
VGA Connection
Headphone Connection
Power Cord Connection
Coax(SPDIF) Connection
4
5
5
6
7
7
8
8
9
9
9
10
6
CONNECTIONS
7
WALL MOUNT
INSTALLATION
8
INITIAL SETUP
Putting The Unit On A Proper Place
Turning The Unit On For The First Time
12
12
TV SETUP
Source selection
Main menu
Picture Menu
Sound Menu
Channel Menu
Parental Control
Setup Menu
Other Menu
13
13
15
19
9
11
21
24
28
30
CONTENTS
10
DISPLAY
MODE
11
SPECIFICATION
12
TROUBLESHOOTING
GUIDE
PC Formats
Video Formats
31
32
33
TV Symptom
34
SAFETY CLASS :This is an IEC safety class I product
and it must be grounded for safety.
SAFETY PRECAUTION
* CAUTION MARKING WAS LOCATED AT THE REAR PLACEMENT INFORMATION
OF THE APPARATUS.
• Do not use this unit in places that are extremely
hot, cold, dusty or humid.
• Do not restrict the airflow of this unit by placing it
somewhere with poor airflow, by covering it with
a cloth, by placing it on bedding or carpeting.
SAFETY INFORMATION
• When connecting or disconnecting the AC power
WARNING: TO REDUCE THE RISK OF ELECTRIC cord, grip the plug and not the cord itself. Pulling
SHOCK,DO NOT REMOVE COVER(OR BACK) the cord may damage it and create a hazard.
NO USER SERVICEABLE PARTS INSIDE.
• When youare not going to use the unit for a long
REFER SERVICING TO QUALIFIED SERVICE
period of time, disconnect the AC power cord.
PERSONNEL.
The lightning flash with arrowhead symbol, RATING PLATE LOCATION
within an equilateral triangle,is intended to
The rating plate is located on the rear of the unit.
alert the user to the presence of uninsulated
FCC STATEMENTS
“dangerous voltage”within the product's enclosure
NOTE: This unit has been tested and found to comply
that may beof sufficient magnitude to constitute a
with the limits for a Class B digital device, pursuant
risk of electric shock to persons.
to Part 15 of the FCC Rules. These limits are designed
The exclamation point within an equilateral to provide reasonable protection against harmful
Triangle is intended to alert the user to
interference in a residential installation.
The presence of important operating and
This unit generates, uses and can radiate radio
maintenance (servicing) instructions in the literature frequency energy and, if not installed and used in
accompanying the appliance.
accordance with the instructions, may cause harmful
CAUTION
• DANGER OF EXPLOSION IF BATTERY IS
INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENT TYPE.
• USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
interference to radio communication. However, there
is no guarantee that interference will not occur in a
particular installation. If this unit does cause harmful
interference to radio or television reception, which
can be determined by turning the unit off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the unit and
receiver.
-Connect the unit into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
WARNING:
• TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
TO REVENT FIRE OR SHOCK HAZARD, DO NOT
• EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO
NOT PLACE OBJECTS FILLED WITH LIQUIDS ON
OR NEAR THIS UNIT.
• SHOULD ANY TROUBLE OCCUR, DISCONNECT
THE AC POWER CORD AND REFER SERVICING
TO A QUALIFIED TECHNICIAN.
WARNING:
Changes or modifications to this
unit not expressly approved by the party responsible
for compliance could void the user authority
to operate the unit.
1
IMPORTANT SAFETY INSTRUCTIONS
1)Read these instructions.
2)Keep these instructions.
3)Heed all warnings.
4)Follow all instructions.
5)Do not use this apparatus near water.
6)Clean only with a dry cloth.
7)Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
8)Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (Including amplifiers) that
produce heat.
9)Do not defect the safety purpose of the
polarized or grounding-type plug.
A polarized plug has two blades with one
wider than the other.
A groundingtype plug has two blades
and a third grounding prong.
The wide blade or the third prong is
provided for your safety.
If the provided plug does not fit into your
wall outlet, consult an electrician for
replacement of the obsolete outlet.
10)Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
11)Only use attachments / accessories specified
by the manufacturer.
12)Use only with the cart, stand,
tripod, bracket, or table
specified by the manufacturer,
or sold with the apparatus.
When a cart is used, use caution when
moving the cart / apparatus combination to
avoid injury from tip-over.
13)Unplug this apparatus during lightning
Storms or when unused for long periods of
time.
14)Refer all servicing to qualified service
personnel. Servicing is required when the
apparatushas been damaged in any way,
such as the power cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
15)To prevent electric shock, ensure the grounding
pin on the AC cord power plug is securely
connected.
2
ACCESSORIES
Please check and identify the supplied accessories.
Remote control ..................................................................................................................x 1
Battery(AA) ............................................................................................................ .........x 2
Warranty Card ................................................................................................................ x 1
Instruction Manual ...........................................................................................................x 1
Base stand and 6 screws ........................................................................................... x 1
Screw driver ................................................................................................................ x 1
GETTING STARTED
USING THE REMOTE CONTROL
·Point the remote control at the remote sensor located on the unit.
·When there is a strong ambient light source, the performance of the infrared remote sensor
·may be degraded, causing unreliable operation.
·The recommended effective distance for remote operation is about 16 feet (5 meters).
BATTERY REPLACEMENT
When the batteries become weak, the operating distance of the remote control is greatly
reduced and you will need to replace the batteries.
CAUTION : Danger of explosion if batter y is incorrectly replaced.
NOTES
·If the remote control is not going to be used for a long time, remove the batteries to avoid
damage caused by battery leakage corrosion.
·Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON-ZINC) or
rechargeable (NICKEL-CADMIUM) batteries.
·Always remove batteries as soon as they become weak.
·Weak batteries can leak and severely damage the remote control.
WARNING :
Do not dispose batteries in a fire. Batteries may explode or leak.
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
3
CONTROL REFERENCE GUIDE
REMOTE CONTROL
1.STANDBY
To switch on the TV or make the TV into
standby mode.
2.MUTE
Press this button to mute or restore sound.
3.INFO
Show the information of the program you are watching.
4.SOURCE
Press this button to select an input source.
5.PMODE
Press this button to select a picture mode for different
picture qualities.
6.SMODE
Press this button to select sound setting for different
sound effects.
7.0-9
Allows you to change the channel of the TV.
8.
Switches back and forth between the current and
previous channels.
9.SLEEP
To select the amount of time before your TV turns
Off automatically.
10.VOL+/VOLIncreases/Decreases the Volume control.
11.CH+/CHSkips to the next/previous channel on TV mode.
12.UP/DOWN/LEFT/RIGHT
Moves the cursor upward/downward/to the left/to the right
when making a selection.
13.MENU
Displays the OSD Menu of the TV.
14.CC
Press the button to enter into the CC mode.
15.MTS
To change among STEREO, MONO and SAP. If there is no
second language available for the signal received, LCD
Display audio will output to mono.
16.ENTER
Press to confirm selections on a menu screen.
17.Exit
Press this button to exit the on screen display.
18.EPG
Press this button to select the electronic programme
guide in DTV mode.
Universal Remote Code: 1218
19. FAV
Press this button to show the favourite list.
20. FAV+/FAVPress this button to go through the FAV channel list.
4
CONTROL REFERENCE GUIDE
FRONT VIEW
1.Color Screen
2.Standby Indicator
Indicates whether the unit is ON
or in STANDBY (OFF) mode.
Light in red: The unit is in STANDBY.
Light in blue :The unit is turned ON.
3.Remote Sensor
Do not block this sensor or the
remote control will not work.
4. Speakers
3 2 4
41
BACK VIEW
1.Power cord
2.Coax OUT Jack
3.TV ANTENNA Terminal
4.VGA IN Jack
5.PC AUDIO IN Jack
6.HDMI IN Jack
7.Service Port
8.AUDIO OUT Jack
(Audio out- This connection is for sending out
analog audio signal to the 2nd equipment.Red
is for Right Channel, white is for Left Channel.)
9.AV (VIDEO/ AUDIO R/L) IN
10.COMPONENT IN Jack
11.Headphone Jack
COAX
RF
VGA
PC
AUDIO
HDMI1
HDMI2
HDMI3
Service Port
5
R
L
AUDIO OUT
VIDEO
AV
R
L
AUDIO IN
Y
COMPONENT
Pb
Pr
Headphone
CONTROL REFERENCE GUIDE
BACK VIEW
VOL+
VOL-
CH+
CHMENU
SOURCE
STANDBY
1. VOL+ Button
2. VOL- Button
3. CH+ Button
4. CH- Button
5. MENU Button
6. SOURCE Button
Press to select the input source of the TV,
and then, press to confirm.
7. STANDBY Button
6
CONNECTIONS
CONNECTING A TV ANTENNA / CABLE / SATELLITE
To view television channels correctly, a signal must
be received from one of the following sources:
- An indoor or outdoor aerial antenna
- A cable system
- A satellite system
NOTE
For receiving over-the-air TV broadcasts, we
recommend that you use an external fixed antenna.
Should you require the use of a temporar y antenna,
please ensure that you purchase an antenna with
sufficient ability to receive in weak signal areas.
Only when you are in close proximity to a transmitter
will a temporar y antenna reproduce a signal as
strongly as a fixed antenna.
Satellite, cable or TV antenna
cable to TV ANTENNA
terminal (cable not included)
CONNECTING AN A/V DEVICE
To connect to other equipment such as a VCR, camcorder, satellite system or cable, etc.
CONNECTING DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE)
VIDEO OUTPUT
To connect A/V devices such as a VCR, video game system or camcorder.
Connecting to a VCR / Video Game System / Camcorder
Connect the AUDIO / VIDEO cable (not included) as shown.
Make sure you connect the cable from the other equipment ( AUDIO and VIDEO OUT ) to this unit
(AV in)
NOTE
Please refer to the user manual
for the other equipment for
more information.
To AUDIO / VIDEO
OUT jacks
7
To AUDIO / VIDEO
IN jacks
CONNECTIONS
CONNECTING A HIGH-DEFINITION (HD) SOURCE USING COMPONENT CONNECTION
High-Definition (HD) Devices with component video output must be connected to the YPbPr input.
Connect the component video cable and audio cable (not included) as shown.
Make sure you connect the component video cable and audio cable from the other equipment
(COMPONENT OUT and AUDIO OUT)to the unit COMPONENT IN.
NOTE
When connecting a DVD player to the television,
the picture resolution is solely dependent upon
the resolution supported by the DVD player attached.
DVD player resolutions vary from 480i to 1080p.
and this television can support DVD players up to
a maximum resolution of 1080p.
* May require a subscription
for receiving HD channels,
check with your cable/satellite
service provider for details.
COMPONENT IN
To COMPONENT
VIDEO IN jacks
To COMPONENT
VIDEO OUT jacks
To COMPONENT
AUDIO IN jacks
To COMPONENT AUDIO
OUT jacks
CONNECTING A HIGH-DEFINITION (HD) SOURCE USING HDMI CONNECTION
HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection
for use with DVD players, DTV, set-top boxes and other digital AV devices. HDMI was developed to provide
the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface
(DVI) in one specification. HDCP is used to protect digital content transmitted and received by
DVI-compliant or HDMIcompliant displays.
HDMI has the capability to support standard, enhanced or high-definition video plus standard to
multi-channel surround-sound audio. HDMI features include uncompressed digital video, a bandwidth of
up to 2.2 gigabytes per second (with HDTV signals), one connector (instead of several cables and
connectors), and communication between the AV source and AV devices such as DTVs.
Connect the HDMI cable (not included) as
shown:
Make sure you connect the cable from the
source equipment ( HDMI OUT ) to this unit
( HDMI IN ).
HDMI CABLE
(NOT INCLUDED)
To HDMI
IN jack
To HDMI
OUT jack
8
CONNECTIONS
CONNECTING A PC
Connect the 15-pin D-SUB PC/VGA connector
from your computer to the 15-pin D-SUB PC/VGA
input on this unit using a monitor cable and an
audio cable (not included) as shown.
Make sure you connect the cable from the computer
( VGA and AUDIO - PC OUT ) to this unit
( VGA And AUDIO - PC IN ).
TO AUDIO OUT jacks
TO PC Connector
NOTE
• Insert the power plug fully into the socket outlet .
( If the power plug is loose , it could generate heat and
cause fire .)
• Ensure that the power plug is easily accessible.
• Ensure the earth pin on the power plug is securely
connected to prevent electrical shock.
• Do not touch the power plug with a wet hand .
( This may cause electrical shock .)
• Do not use any power cord other than that provided
with this TV. ( This may cause fire or electrical shock.)
• Do not damage the power cord .
( A damaged cord may cause fire or electrical shock ).
• Do not move the TV with the cord plugged in the
socket outlet.
• Do not place a heavy object on the cord or place
the cord near a high-temperature object.
• Do not twist the cord, bend it excessively, or stretch it.
• Do not pull on the cord. Hold onto the power plug body when disconnecting cord.
• Do not use a damaged power plug or socket outlet.
9
CONNECTIONS
Connection to a Home Theater Audio System
For BEST audio performance
Connecting to a Home Theater System
Dolby Digital can deliver optimal 2 channel
stereo or surround sound with five discrete
full range channels plus a sixth channel for
a subwoofer.
Enjoy optimal sound reproduction from your
system with a Dolby Digital amplifier that
incorporates a digital coaxial input. Connect
an optional digital cable directly to the
television’s Coax audio output to listen
through all inputs except VGA.
(The VGA does not support digital audio)
How To Setup Digital Output
Press the MENU button on the remote control
Press the right ► arrow button to select SOUND
and Press ENTER to enter the submenu.
Press the down ▼ arrow button to highlight
Digital Audio Output and press ◄► to
change setting from PCM, Raw or Off.
SPDIF OUT
Coax
10
INITIAL SETUP
PUTTING THE UNIT ON A PROPER PLACE
When you turn on your television set for
the first time, be sure to place it on a solid
stable surface.
To avoid danger, do not expose the TV
to water, or a heat source
(e.g. lamp, candle, radiator).
Do not obstruct the ventilation grid
at the rear and be sure to leave sufficient
gaps around the unit.
TURNING THE UNIT ON FOR THE FIRST TIME
After you have initially connected your TV
antenna or cable,
turn the television ON.
A screen will display asking you to run a
Initial Setup menu to search and receive
available local digital channels.
It is where you will select Menu Language
and choose your Signal Type between
Air and Cable.
After that , you can choose Auto Channel Search
and then it will search analog channels first,
then digital channels.
Before execute auto channel search, please
confirm your antenna type is Air or Cable.
Wrong setting of Signal Type maybe cause
finding no channel.
12
T V SETUP
1. Press the
2. Use the or
button on the remo te control.
button to select the options
(TV,AV,YPbPr, HDMI1,HDMI2,HDMI3,PC)
and select any of them using the
button or
the ENT ER button.
(The screen will change to your desired s ource).
Note:
Before wa tching please ma ke sure all necessary
cables and devices are connected.
Main MENU
Press MENU to display the main menu or return to the previous menu or close the main menu.
Press ◄/► to high light the desired menu icon, and press ENTER to select.
If no buttons are pressed, the menu will close automatically after about 10 seconds.
Main Menu Description
Picture Menu
Adjust your picture settings.
The operations are slightly different among
different source.
Sound Menu
Adjust the sound settings.
13
T V SETUP
Channel Menu
Customize your channel settings.
Parental Control Menu
Set program rating control.
Setup Menu
Select closed caption options, language
and time.
Other Menu
Set the OSD blue background, whether auto
power off if no signal or no operation, clear
all user settings, etc.
ENTER
14
T V SETUP
Picture Menu
Press ▲/▼ to highlight one of the following options, then press ENTER or ► to enter next
submenu to adjust it. Press EXIT to clear on-screen menu or MENU back to the previous
menu.
Picture Settings
Adjust the picture quality including brightness, contrast, color, tint, sharpness.
Screen Size
Press ◄/► to select the display aspect ratio till the picture is fit onto the screen.
The operations are different according to different input source.
PC Settings
The item is available only for PC DB15 input mode.
Color Temperature
Press ◄/► to select the color temperature that you feel comfortable.
Cool
Gives white colors a blue tint.
Normal
Gives white colors a neutral tint.
Warm
Gives white colors a red tint.
Advanced Picture Settings
The Item is some special picture feature.
15
T V SETUP
Picture Settings
When Picture Mode is set to User, the following setting can be manually adjusted.
Press PMODE shortcut button on the remote control to select picture mode directly.
Picture Mode
Highlight the item and Press ◄/► to select Standard/ Movie/ User/ Dynamic.
Standard Produces a highly defined image in a normally lit room.
Movie
Produces a highly defined image in gentle lit room.
User
Select to customize picture setting.
Dynamic Produces a highly defined image in a bright lit room.
Highlight the item and press ►, and a process bar appears, then press ◄/► to adjust the value.
Tint is available when analog TV or NTSC-system AV.
Press MENU to back the Picture Settings menu.
Brightness
Adjust darkness of black sections in the picture.
Contrast
Adjust the white level of the picture.
Color
Adjust the color intensity of the picture.
Tint
Adjust the hue( Red, Green, Blue) of the picture.
Sharpness
Object edges are enhanced for picture detail.
16
T V SETUP
PC Settings
PC Settings Menu is aviliable only in PC DB15 mode.
Press ▲/▼ to highlight one of the following options, then press ENTER to select it.
Auto Adjust
Automatically adjust Clock, Phase, H-Position and V-position settings.
Horizontal Position
Shift the screen slightly to left or right.
Vertical Position
Shift the screen slightly up or down.
Clock
Adjust the DB 15 Picture signal sampling clock rate.
Phase
Adjust the DB 15 Picture signal sampling phase. It maybe affect the definition. Wrong value
maybe result the interference.
Reset
Reset the parameters of current menu to default value.
17
T V SETUP
Advanced Picture Settings
Press ▲/▼ to highlight the item and press ENTER or ► to display the submenu as following.
Dynamic Contrast Off/ Low/ Medium/ High
The system will adjust the luminance curve by analyzing the picture content dynamically.
Film Mode Off/ On
For the 2:2 or :2 format signal of cinema, enable special pixel process to reduce the flick of
moving area.
Noise Reduction Off/ Low/ Medium/ High
You can clear up analog TV signal by reducing the dot noise. This feature is not available at
PC source.
MPEG Noise Reduction Off/ Low/ Medium/ High
Similar with the Noise Reduction, you can set to reduce the block noise.
18
T V SETUP
Sound Menu
Sound Settings
Set the sound mode, and Bass/ Treble/ Balance.
Surround Mode
Set to enjoy the virtual surround sound. Press ENTER to set or cancel.
AVL
Auto Volume Level. Press ENTER to set or cancel. When AVL is set on, it will limit the sound
being heard when sudden changes in volume occur during commercial breaks or channel
changes.
Usually be enabled at night.
Analog Sound
Available at analog TV channels, SAP/ Stereo/ Mono
Set the preferred sound track of analog channels. Stereo and SAP ecist on some channels.
Generally SAP is a second language sound or help the people with hearing impair.
Digital Sound
Available at digital TV channels, English/ French/ Spanish
Set the preferred sound track of digital channels, French and Spanish exist on some channels.
Digital Audio Output PCM/ Raw/ Off
Set the audio output type of coax or optical terminal. Raw means output the original format of
audio stream. PCM can be matched with most AV amplifiers.
Equalizer Settings
Adjust the curve of 7 bands equalizer.
19
T V SETUP
Sound Settings
Sound Mode Standard/ Soft/ User/ Dynamic
Only in User mode, the following items can be adjusted.
Bass
Adjust the low frequency band response.
Treble
Adjust the high frequency band response.
Balance
Adjust the level of sound coming from the left or right speaker.
Adjust the Bass/ Treble/ Balance
1.Set sound mode to User.
2.Highlight the item and press ► to display the submenu, the press ◄/► to adjust the value.
20
T V SETUP
Equalizer Settings
Mode Off/ Rock/ Pop/ Jazz/ User( only in User mode, the following can be manually adjusted.)
Adjust Equalizer Settings
Based on your favorites about which frequency band need to be adjusted, make small
adjustment with certain frequency band at a time. Suggest NOT making too large changes.
1.Set mode to User.
2.Press ▼ to select the first( 100Hz) item, then press ◄/► to select the band to be turned.
3.Press ▲/▼ to adjust the value.
Channel Menu
Note: The menu is available only at TV source.
21
T V SETUP
Channel List
You can view all the channels and choose one quickly.
“ABC”: Label of the Channel.
Press ▲/▼ to highlight a channel and press ENTER to view it.
Favorite List
All of you favorite channels are listed in this menu, and you can choose them quickly.
Channel Setting
Set the favorite channels, skipped channels, label of channels.
Signal Type
Set to Air or Cable according to your antenna source.
22
T V SETUP
Auto Channel Search
Highlight and press ENTER to start the auto searching.
It will search analog channels first, then digital channels.
Before execute auto channel search, please confirm your antenna type is Air or Cable.
Wrong setting of Signal Type maybe cause finding no channel.
Channel Settings
Skip
Set the channel to be skipped when using
CH+/CH- to view channels.
Favorite
Set the channel to your favorite list.
Label
Rename label of the channel.
Change the settings
Skip & Favorite
1.Press ▲/▼ to select the channel you want to set.
2.Press ◄/► to highlight corresponding item, and press ENTER to set or cancel.
Label
1. Press ▲/▼ to select the channel and ENTER to enter the edit state.
2. Press ▲/▼ to select the character, press ◄/►to move the cursor. Total seven letters.
23
T V SETUP
Parental Control
Note: The default user password is "0000", and if forget what you set, try"1470".
Lock Parental Control
The following items are only available if the password input is correct.
V-CHIP Include below settings:
US V-Chip
Rating system used at USA.
Canada V-Chip
Rating system used at Canada.
Block UnRated Show
Control whether lock the program that have not any valid rating flag.
Downloadable Rating
Control the RRT5 setting which are valid only at some digital cable channels.
Clear Downloadable Data
Select to clear the previous downloadable rating data.
Change Password
Enter a 4-digital number you want to set.
24
T V SETUP
US V-CHIP
For the United States, the rating setting basically include the following options:
Movie Rating, TV Rating.
Moive Rating
This system defines the rating control which come from MPAA rules
Rating
Define
G
General audience. All ages admitted.
PG
Parental guidance suggested . Some material may not be suitable for child ren.
PG-13
Parents strongly cautioned. Some material may be inappropriate for children
under 13.
R
Restricted. Children under 17 require accompanying parent or adult guardian.
NC-17
No one 17 and under admitted
X
Adult audience only.
25
T V SETUP
TV Rating
The TV rating compose of two aspects: age-based and content-based.
Age
Define
TV-Y
General audience
TV-Y7
Parental guidance suggested
TV-G
Parents strongly cautioned
TV-PG
Retricted
TV-14
No one 17 and under admitted
TV-MA
Adult audience only
Content
Define
FV
Fantasy violence
D
Suggestive dialogue
L
Strong language
S
Sexual situations
V
Violence
Note: The content ratings will increase depending on the level of the age-based rating. For
example, a program with a TV-PG V(violence) rating may contain moderate violence, while a
TV-14 V(violence)rating may contain intense violence. So locking a higher level option will
automatically cause locking the option that has more sensitive level.
26
T V SETUP
Canada V-CHIP
For Canada, the rating setting include the
following options: English rating, French Rating.
English Rating
These ratings are for programs which are using
English rating system.
Rating
Defined as
C
Children
C8+
Children 8 years and older
G
General programming
PG
Parental guidance
14+
Viewers 14 and older
18+
Adult programming
French Rating
These ratings are for programs which are using
French rating system.
Rating
Defined as
G
General
8 ans+
Not recommended for younger children
13 ans+ Not recommended for children under
age 13
16 ans+ Not recommended for ages under 16
18 ans+ This program is restricted to adults
27
T V SETUP
Change Password
At first you should enter the correct old password then enter new password twice.
If you lost your password, try to enter "1470".
Setup Menu
Closed Caption(CC)
Menu Language
Set the menu language. English/French/Spanish.
Clock
Set the Time Zone/ Auto Clock/ Setup Time/
Day of week/ Daylight Saving Time.
Caption Display
Display or hide the CC .
Analog Caption Type
Select from closed-caption modes for analog
programs.
Digital Caption Type
Applies only to digital channels with closed
caption.
Digital CC Preset Default/Custom
If set to Custom, Digital CC Style is available.
28
T V SETUP
Digital CC Style
This menu is valid only for digital closed caption of digital channels.
DIGITAL CC STYLE
CC Size
Default
CC Font
Default
CC Opacity
Default
Text Color
Default
CC Background Opacity
Default
CC Background Color
Default
CLOSED CAPTION
MENU
:Return
:Move
:Change Setting
CC Size Small/Standard/Large/Default
CC Font Style0~7,Default
CC Opacity Default/Solid/Flashing/Translucent/Transparent/Default.
Text Color Black/White/Red/Green/Blue/Yellow/Magenta/Cyan/Default.
CC Background Opacity Solid/Flashing/Translucent/Transparent/Default.
CC Background Color Black/White/Red/Green/Blue/Yellow/Magenta/Cyan/Default.
Clock
Time Zone Hawaii/Alaska/Pacific/Centra/
Mountain/Eastern/Samoa/Newfounland/Altantic
Set the time zone.
Auto Clock
If set it to ON , the TV will sync the local clock
according to the DTV broadcasting time
automatically. Otherwise you can set the time
manually.
Setup Time
Set Auto Clock to Off, then you can set the time manually .
Note: In the case of loss of power, the clock setting will be lost
Day of Week
The TV will calculate current day of week according to the time.
Daylight Saving Time
When Auto Clock set to ON, this item is available to enable daylight saving option or not.
29
T V SETUP
Others Menu
ENTER
Blue Back
Set the screen background color blue or not when no valid signal input. When analog TV
input and has no signal, snow noise will display if this option is cleared.
No Signal Power Off
If it is set,TV will automatically enter standby after 10 minutes without signal input.
No Operation Power Off
If it is set, TV will automatically enter standby after 3 hours without any operation.
All Reset
When you highlight the item, the system will note you that"Attention! If [AlI Reset] was
executed,TV system is reset" , and if you are sure to reset, press ENTER to reset .
Audio Only
When you highlight the item, the system will note you that "Attention! Hold on power key 3
second to restore video", and if you are sure not need to view (backlight is turned off),
press ENTER to confirm. As the attention, if you want to wake up the video, please hold on
the power button for 3 seconds.
30
DISPLAY MODE
PC FORMATS
Res o l ut io n
640 X 480
H or i z o nt a l
Sc an ning F r eq u en cy
(KHz)
Vert i c a l
Sc an n i n g Fr e qu e ncy
(Hz)
Format
31. 5
8 00 X 600
8 00 X 6 0 0
1 024 X 7 68
1920 x 1080
6 6. 6
NOTE:
This product does not support the display mode not listed above.
In order to achieve the best display effect, please select the above-listed
5 display modes input signal.
Because of the difference of display drivers output signal
(especially non-standard signal output), the display image may appear little
disturbance which can be adjusted on the PC menu.
To prolong this unit's service life, please set your computer to power management mode.
31
DISPLAY MODE
VIDEO FORMATS
SUPPORTED COMPONENT / HDMI INPUT MODE
R e solut i on
Horizontal
Scanning Frequency
Vertical
Scanning Frequency
(Hz)
Format
720 X 480
31. 47
59. 94
480 i
720 X 480
15. 734
59. 94
480 p
1280 X 720
37. 5
50
720 p
1280 X 720
45
60
720 p
1920 X 1080
31. 25
50
1080 i
1920 X 1080
33. 75
60
1080 i
24
1080 p
1920 X 1080
27
1920 X 1080
56. 25
50
1080 p
1920 X 1080
67. 50
60
1080 p
NOTE:
The above listed formats are also related to the AV devices you are about to connect.
Before you connect this unit with others please read all instructions carefully and
make sure all necessary cables are connected.
.
This unit may be incompatible with some other formats which are not meet the
above conditions.
32
SPECIFICATION
Model Description
42”LED TV
Panel
Panel Type
Diagonal Size
Screen Format
Resolution
Brightness
Contrast
View Angle
Response Time
Maximum Color
LED Panel
42 inches
16:9
1920 x1080
360 nit
1400:1
178(H)/178(V)
8 ms
16.7M colors
Systems
Refresh Rate
Color System
Sound System
Audio System
Sound Output
60Hz
ATSC/QAM/NTSC
M
MTS
RF Input
75 ohm external terminal
Video: 480i, 480p, 720p, 1080i, 1080p.
Audio: Two channel linear PCM 32, 44.1 and 48kHz, 16, 20 and 24 bits
D-sub 15pin
G: 0.7Vp-p, 75ohms
B: 0.7Vp-p, 75ohms
R: 0.7Vp-p, 75ohms
HDMI Input
PC-RGB Input
Input /
Output
Jacks
Composite Video Input
1.0 Vp- p, 75ohms RCA
Component/Y Pb Pr Input
RCA
Y:1.0 Vp-p, 75ohms, 0.3V negative sync
Pb:0.7Vp-p, 75ohms
Pr : 0.7Vp-p, 75ohms
Sound Input
Power
L/R Speaker:10 W + 10W
Power Requirement
Rated power consumption
Component AUDIO: For Component Audio input
AV AUDIO: For CVBS Audio input
PC AUDIO: For PC RGB Audio input
500mV rms, Impedance: 20k ohms
100-240V~ 50/60Hz
68W
This manual is only for your reference.
Specifications are subject to update without prior notice.
33
TROUBLESHOOTING GUIDE
SYMPTOM
TV
Bad Picture (snow,
multiple images
distortion,blurry)
No sound.
CAUSE (AND REMEDY )
•
•
•
•
•
Check the location of the antenna and adjust it if necessary.
Make sure the antenna cable is firmly connected.
Make sure all input cables are firmly connected.
Increase the volume.
Check whether the mute function has been activated on the
Remote Control.
Black and White
picture.
• Check the PICTURE setting within the PICTURE menu.
• Check to make sure the program you are watching is broadcast
in Color and not Black & White.
No picture or sound.
•
•
•
•
•
•
Coloredpatches of
picture.
• Make sure there are no unshielded electrical devices nearby
that are causing interference.
Make sure the unit is plugged in and turned on.
Make sure that the ATV mode is selected.
Try a new channel to check for possible station trouble.
Make sure the antenna is connected properly.
Increase the volume.
Make sure the antenna or audio/video source device is
working properly.
• Make sure all cables are firmly connected.
• Check for local interference.
• Turn the TV off for 30 minutes, then try it again.
Panel function key does • Under the influence of electrostatic phenomenon, the product
not respond correctly.
may malfunction and require usertopowerreset.
• Unplug and re-plug the AC power cord.
The display monitor's
panel goes hot.
• LED TV takes inside lighten phosphor. It may increase the
temperature of the screen in some occasions. It's not a defect.
Unusual dots
• Black dots and Bright points may appear on the LED screen.
This is a structural property of the LED panel and is not a defect.
Stripes on screen
• Adjust the impulse phase may decrease stripes.( RGB in)
The top of the monitor
gets hot .
• It may occur during long-time working. It's not a defect.
Unable to select a
certain channel.
• The channel may be skipped. Choose this channel by
directly selecting the buttons from the remote control.
Disorder display
at power on.
• This may be caused because of a very short interval
between POWER OFF and ON.
• Unplug the power and restart.
34
Download PDF
Similar pages