Connects to CPU with standard IDE cable 5V power supplied

DA104
Industrial Relay Board
DA104
-CFD
DA104-HD
information
The DA104 provides a convenient means of integrating a 2.5” IDE hard
drive, M-Systems CompactFlash, or M-Systems IDE2000 Flash Disk onto
a PC/104 “stack”. Connection of the drive to the host CPU IDE port is
supported by a standard 40 pins ribbon cable. The 5VDC power for the
dirves is supplied either though the PC/104 bus, or 2 positions screw terminal. For additional memory, a second 2.5” hard drive or IDE2000 Flash
Disk can be mounted to the underside of the module.
specifications
Size
FD
· 3.55” x 3.775” x 0.43”*
04-M
DA1
Height of PC/104 bus connector. It may vary depending on the IDE drive that is installed
on the top and/or underside drive.
features
Connects to CPU with standard IDE cable
5V power supplied through PC/104 headers, or 2
position screw terminal
PC/104 Compliant (one hard drive connection)
Supports the following:
Only 4.48oz / 127.12g
· M-Systems 1.3” IDE2000 Flash Disk, or
· M-Systems 1.8” IDE2000 Flash Disk
Additional flash disk or 2.5” hard drive can be
mounted to undersize of DA104
Weight 1.73oz / 49.03g (excluding IDE drive)
Ordering Information
Part Number
Power
· 5V power is supplied through:
PC/104 headers
2 positions screw terminal
Description
DA104-MFD
Drive Adaptor for M-Systems 1.3” or 1.8” IDE2000 flash disk
DA104-CFD
Supports Compact Flash
DA104-HD
Supports 2.5” IDE hard drive (bolt patterns vary)
Options
this product is
manufactured by:
OPT-MFD
Additional drive adaptor for 1.3” or 1.8” IDE2000 flash disk on the underside of DA104
Tel: 604.945.9565 ~ Fax: 604.945.9566 ~ www.tri-m.com
1407 Kebet Way, Unit 100 ~ Port Coquitlam ~ BC ~ V3C 6L3~ Canada
Download PDF
Similar pages