POLYSAN MINI-CARTRIDGES
• High dirt holding capacity
• Steamable and sanitizable
• EC-listed materials for Food contact
• FDA-listed materials per CFR21
• Validation guide on request (only PH grade)
POLYSAN MINI-CARTRIDGE is obtained by pleating up to 5 polypropylene layers of decreasing
porosity to achieve high effective filtration area, high dirt holding capacity with efficiency higher
than 99.98%.
All the components in polypropylene are assembled by thermowelding process. MINI-CARTRIDGE
is well suited in all applications where small flow rate is involved and precision filter rating is
required; PH grade is prefluxed with non-pyrogenic water and suitable for pharmaceutical
applications.
FOOD-SAFETY
MATERIALS OF CONSTRUCTION
POLYSAN filter element materials
meet
(EU)
regulation 10/2011 and its amendments, regulations
(EC) 1935/2004 and 1895/2005.
Filter media
polypropylene
Upstream supports
polypropylene
BIO-SAFETY
Downstream supports
polypropylene
Internal core
polypropylene
External cage
polypropylene
End caps/adapters
polypropylene
Filter media and components pass USP Biological
Reactivity and Chemical-Physical tests for CLASS VI
plastics.
Specific for “PH” grade: the filter meets USP “Water
for injection” requirements for particle release and
the effluent is Non-Pyrogenic per USP Bacterial
Endotoxins (< 0,25 EU/ml).
OPERATING CONDITIONS
- max. continuous temperature
65 °C
- regeneration
2% NaOH solution at room temperature
- sterilization with steam
continuously with cycles of 20 minutes at 121 °C
- sanitization with hot water
80 °C max
- sanitization with chemicals
Can be sanitized by standard chemical agents
- max. differential pressure
5,0 bar at 25 °C
- recommended change out differential pressure
2,0 bar at 25 °C
CODE
FILTRATION RATING
µm
MAX WATER FLOW RATE FOR CARTRIDGE
l/h
KD
0,6
130
KF
1,2
200
KG
2,5
500
KL
4,5
750
KR
6,5
1000
KS
10,0
1000
KT
20,0
1000
WATER FLOW RATE FOR CARTRIDGE SIZE 1001
0,7
0,25
0,2
Pressure drop (bar)
0,5
0,4
0,3
0,2
0,1
0,15
0,1
0,05
0
0
0
KD
200
300
400
0
Flow rate (l/h)
KF
KL
500
KR
1000
1500
2000
2500
Flow rate (l/h)
KS
POLYSAN 1001 ORDERING INFORMATION
PKP -
100
END FITTING
CODE
S.O.E.: open end with
internal o-ring 2.116
100
1
NOMINAL
LENGTH
CODE
135 mm
1
-
KR
-
FILTRATION
RATING
µm
CODE
0,6
KD
1,2
KF
2,5
KG
4,5
KL
6,5
KR
10,0
KS
20,0
KT
-
CODE
CODE
DESCRIPTION
No code
General Grade without
certification
PH
Prefluxed
with
nonpyrogenic
water;
Quality Certification in
the box.
GASKETS
No code
Standard
Silicone
E
On request
EPDM
Data contained in this bulletin are informative and subject to change without notice.
User is responsible for determining whether the product is fit for particular purpose and suitable for
User’s method of application.
DS-PKP 1001-730-UK-17
Pressure drop (bar)
0,6
Download PDF
Similar pages