Click here, type the title of your paper, Capitalize first letter

Available online at
Procedia CIRP 00 (2016) 000–000
14th CIRP Conference on Computer Aided Tolerancing (CAT)
Click here, type the title of your paper, Capitalize first letter
First Authora , Second Authorbb , Third Authora,b,*
a First
affiliation, Address, City and Postcode, Country
affiliation, Address, City and Postcode, Country
b Second
Corresponding author. Tel.: +0-000-000-0000; fax: +0-000-000-0000. E-mail address:
Click here and insert your abstract text.
c 2016 The Authors. Published by Elsevier B.V.
Peer-review under responsibility of the organizing committee of the 14th CIRP Conference on Computer Aided Tolerancing.
Keywords: Type your keywords here, separated by semicolons ;
1. Main Text
Here introduce the paper, and put a nomenclature if necessary, in a box with the same font size as the rest of the paper.
The paragraphs continue from here and are only separated
by headings, subheadings, images and formulae. The section
headings are arranged by numbers, bold and 10 pt. Here follows
further instructions for authors.
radius of
position of
further nomenclature continues down the page inside
the text box
1.1. Structure
Files must be in LaTeX format only and should be formatted
for direct printing, using the CRC LaTeX template provided.
Figures and tables should be embedded and not supplied
Please make sure that you use as much as possible normal
fonts in your documents. Special fonts, such as fonts used in the
Far East (Japanese, Chinese, Korean, etc.) may cause problems
during processing. To avoid unnecessary errors you are strongly
advised to use the ‘spellchecker’ function of TeX Editor.
Follow this order when typing manuscripts: Title, Authors,
Affiliations, Abstract, Keywords, Main text (including
figures and tables), Acknowledgements, References, Appendix.
Collate acknowledgements in a separate section at the end of
the article and do not include them on the title page, as a
footnote to the title or otherwise.
Bulleted lists may be included and should look like this:
• First point
• Second point
• And so on
Ensure that you return to the ‘Els-body-text’ style, the style
that you will mainly be using for large blocks of text, when you
have completed your bulleted list.
Please do not alter the formatting and style layouts which
have been set up in this template document. As indicated
in the template, papers should be prepared in single column
format suitable for direct printing onto paper with trim size
210 × 297 mm. Do not number pages on the front, as page
numbers will be added separately for the preprints and the
Proceedings. Leave a line clear between paragraphs. All the
required style templates are provided in the file “LaTeX
Template” with the appropriate name supplied, e.g. choose 1.
Els1st-order-head for your first order heading text, els-abstracttext for the abstract text etc.
1.2. Tables
All tables should be numbered with Arabic numerals. Every
table should have a caption. Headings should be placed above
tables, left justified. Only horizontal lines should be used within
a table, to distinguish the column headings from the body of the
table, and immediately above and below the table. Tables must
c 2016 The Authors. Published by Elsevier B.V.
2212-8271 ⃝
Peer-review under responsibility of the organizing committee of the 14th CIRP Conference on Computer Aided Tolerancing.
Author name / Procedia CIRP 00 (2016) 000–000
Table 1. An example of a table.
An example of a column heading
Column A (t)
Column B (t)
And an entry
And another entry
And another entry
be embedded into the text and not supplied separately. Below
is an example which the authors may find useful.
1.3. Construction of references
References must be listed at the end of the paper. Do not
begin them on a new page unless this is absolutely necessary.
Authors should ensure that every reference in the text appears
in the list of references and vice versa. Indicate references by
[1] or [2,3] in the text.
Some examples of how your references should be listed are
given at the end of this template in the ‘References’ section,
which will allow you to assemble your reference list according
to the correct format and font size.
Reference generation by using bibliography style commands
for LaTeX template only.
The author may use “model3-num-names.bst” as per the
style required in document. The sample bib file could be referred. If the author may using bibstyle for providing references
author must comment the bibliography section in TeX file,
Bibtex will generate the reference automatically.
If the author may not able to view the references in output
same could be done by copying the bibliography section from
“filename.bbl” file and paste in TeX file.
1.4. Section headings
Section headings should be left justified, bold, with the first
letter capitalized and numbered consecutively, starting with the
Introduction. Sub-section headings should be in capital and
lower-case italic letters, numbered 1.1, 1.2, etc, and left justified, with second and subsequent lines indented. All headings
should have a minimum of two text lines after them before a
page or column break. Ensure the text area is not blank except
for the last page.
1.5. General guidelines for the preparation of your text
Avoid hyphenation at the end of a line. Symbols denoting vectors and matrices should be indicated in bold type.
Scalar variable names should normally be expressed using italics. Weights and measures should be expressed in SI units. All
non-standard abbreviations or symbols must be defined when
first mentioned, or a glossary provided.
• a = artwork component type
• b = manuscript reference code
• c = standard file extension
Component types:
• gr = figure
• pl = plate
• sc = scheme
• fx = fixed graphic
1.7. Footnotes
Footnotes should be avoided if possible. Necessary footnotes should be denoted in the text by consecutive superscript
letters1 . The footnotes should be typed single spaced, and in
smaller type size (8 pt), at the foot of the page in which they are
mentioned, and separated from the main text by a one line space
extending at the foot of the column. The ‘Els-footnote’ style is
available in the “TeX Template” for the text of the footnote.
Please do not change the margins of the template as this can
result in the footnote falling outside printing range.
2. Illustrations
All figures should be numbered with Arabic numerals
(1,2,3, . . . .). Every figure should have a caption. All photographs, schemas, graphs and diagrams are to be referred to
as figures. Line drawings should be good quality scans or
true electronic output. Low-quality scans are not acceptable.
Figures must be embedded into the text and not supplied
separately. In MS word input the figures must be properly
coded. Preferred format of figures are PNG, JPEG, GIF etc.
Lettering and symbols should be clearly defined either in the
caption or in a legend provided as part of the figure. Figures
should be placed at the top or bottom of a page wherever
possible, as close as possible to the first reference to them in
the paper. Please ensure that all the figures are of 300 DPI
resolutions as this will facilitate good output.
The figure number and caption should be typed below the
illustration in 8 pt and left justified [Note: one-line captions
of length less than column width (or full typesetting width
or oblong) centered]. For more guidelines and information
to help you submit high quality artwork please visit: Artwork has no
text along the side of it in the main body of the text. However,
if two images fit next to each other, these may be placed next to
each other to save space. For example, see Fig. 1.
1.6. File naming and delivery
Please title your files in this order ‘procedia acronym
conference acronym authorslastname’. Submit both the source
file and the PDF to the Guest Editor.
Artwork filenames should comply with the syntax
“aabbbbbb.ccc”, where:
Fig. 1. (a) first picture; (b) second picture.
1 Footnote
Author name / Procedia CIRP 00 (2016) 000–000
3. Equations
Equations and formulae should be typed in Mathtype, and
numbered consecutively with Arabic numerals in parentheses
on the right hand side of the page (if referred to explicitly in the
text). They should also be separated from the surrounding text
by one space
/( ′′
Xr = Q̇rad Q̇rad + Q̇conv
Acknowledgements and Reference heading should be left
justified, bold, with the first letter capitalized but have no
numbers. Text below continues as normal.
  m
  E⃗ 
Jc (T = const.) · P ·   + (1 − P)
4. Online license transfer
All authors are required to complete the Procedia exclusive
license transfer agreement before the article can be published,
which they can do online. This transfer agreement enables
Elsevier to protect the copyrighted material for the authors,
but does not relinquish the authors’ proprietary rights. The
copyright transfer covers the exclusive rights to reproduce and
distribute the article, including reprints, photographic reproductions, microfilm or any other reproductions of similar nature
and translations. Authors are responsible for obtaining from
the copyright holder, the permission to reproduce any figures
for which copyright exists.
Appendix A. An example appendix
Authors including an appendix section should do so before
References section. Multiple appendices should all have headings in the style used above. They will automatically be ordered
A, B, C etc.
A.1. Example of a sub-heading within an appendix
There is also the option to include a subheading within the
Appendix if you wish.
[1] Van der Geer J, Hanraads JAJ, Lupton RA. The art of writing a scientific
article. J Sci Commun 2000;163:51-9.
[2] Strunk Jr W, White EB. The elements of style. 3rd ed. New York: Macmillan; 1979.
[3] Mettam GR, Adams LB. How to prepare an electronic version of your article. In: Jones BS, Smith RZ, editors. Introduction to the electronic age.
New York: E-Publishing Inc; 1999. p. 281-304.
Author name / Procedia CIRP 00 (2016) 000–000
Instructions to Authors for LaTeX template:
1. ZIP mode for LaTeX template:
The zip package is created as per the guide lines present on the URL preparing-crcjournal-articles-with-latex for creating the LaTeX zip file of Procedia LaTeX template. The zip generally contains the following
.bst file
Manuscript templates for use with these bibliographic styles
Generic and journal specific logos, etc.
The LaTeX package is the main LaTeX template. All LaTeX support files are required for LaTeX pdf generation from the LaTeX
template package.
Reference style .bst file used for collaboration support: In the LaTeX template packages of all Procedia titles a new “.bst”
file is used which supports collaborations downloaded from the path
2. Reference styles used in Procedia master templates:
Reference style
AASRI Procedia
APCBEE Procedia
IERI Procedia
Procedia CIRP
2 Harvard
3 Vancouver Numbered
3 Vancouver Numbered
3 Vancouver Numbered
2 Harvard
3 Vancouver Numbered
1a Numbered without article titles
2 Harvard
2 Harvard
3a Embellished Vancouver
3 Vancouver Numbered
3a Embellished Vancouver
3a Embellished Vancouver
1 Numbered
3a Embellished Vancouver
3a Embellished Vancouver
3a Embellished Vancouver
1a Numbered without article titles
3 Vancouver Numbered
3a Embellished Vancouver
3a Embellished Vancouver
2 Harvard
Download PDF
Similar pages