Operating Instructions (SKU#01257658 CERBERUS 3 HEADED DOG WITH FOG) 1 .Carefully remove all of the parts from the package including: 3 dog heads with tubes in the neck, 1 wood board, 2 dog legs, 1 metal support leg, 1 piece of black fur, 1 clear plastic piece for body shape, 1 - 3 hose fog machine attachment tube, 1 electric relay connector for the fog machine, 1 AC/DC adapter, and metal rod and screws in small box. 2. Screw the 2 legs and 1 metal support leg to the wood board as shown in diagram A. Be sure to screw all 3 legs on tightly and make sure they are stable. 3. Click the heads to the wood board and use the metal screws and nuts to secure them in place. The center head should be placed on the wood board first. The center head is the one that has two separate wires coming out from the neck. The two heads with only one wire should be placed on the sides. Take the loose end of the black tube located inside of the back of the dog heads and put them through the holes on the wood board. Connect the wires from each head to the corresponding wires that are attached to the speaker box. See diagram B. 4. Put the clear plastic piece on the wood board as shown in diagram C to make the body dimension. 5. Cover the body with the black fur and adjust the Velcro strips on the fur as shown in diagram D. 6. This product is designed for indoor or covered porch use only, and should not be placed outdoors subject to the weather. 7. Once the item is placed in the area to be displayed, connect the AC/DC adapter to the adapter jack which is located at the back of the product on the speaker box. Once connected, plug the AC/DC adapter into the appropriate electrical outlet. 8. This item is equipped with a motion sensor. Simply pass in front of the item to activate it. To activate the item again, wait for the bobble head movements to completely stop and then pass in front of the prop again. 9. The prop is also equipped with a Step Pad feature. The Step Pad is not included, but is sold separately. To use the Step Pad function, plug the Step Pad jack into the speaker box and then plug the AC/DC adapter into the appropriate electrical outlet. 10. To adjust the volume of this product, turn the control knob as shown in diagram E . 11. This item can also connect to an optional fog machine (sold separately) to have fog come out of the dog’s mouths. To achieve this function, connect the tubes which come out from the back of the dog’s necks to the 3 hose fog machine attachment tube, then connect the 3 hose tube to the fog machine. The 3 hose fog machine attachment tube is made to fit the 400 Watt (SKU# 00567230) and the 1,000 Watt (SKU # 01027507) fog machines sold exclusively at Spirit Halloween. The fit between the fog machine hose and the fog machine nozzle should be snug. To adjust the size of the fog machine attachment tube to fit a bigger fog machine nozzle you need to put your fingers in the end of the 3 hose fog machine attachment tube (the side that connects to the fog machine) and twist to remove a piece of the plastic. See diagram F. 12. Connect the wire pin jack which comes out from the speaker to the pin box in the electric relay connector, and then plug it into the appropriate electrical outlet as shown in diagram G. Allow several minutes for the fog machine to preheat. Once the fog machine is ready the indicator light on the relay connector will turn red. 13. When storing this product, unplug the adapter from the electrical outlet and carefully remove the product from where it has been displayed to avoid any undue strain or stress on the product. 14. When not in use, store neatly in a dry, cool location protected from sunlight. A B C D MADE IN CHINA E STEP PAD ADAPTER TRY ME F CONTROL G Warnings: This prop is for decoration only and is not a toy. Not intended for use by children - Choking hazard due to small parts. Stay clear of the prop while operating. Do not turn the prop on until you have completely finished assembling it. Keep electrical wires away from water.