Winslet®
Two Handle Widespread Lavatory Faucet
SLW-5112 Series
Installation Brief
 Need Help?
Tools & Materials
Model Number
SLW-5112 Two Handle Widespread
lavatory faucet with pop-up drain
Applies to models manufactured
after Q1 2013, p/n LN-02058
identified on faucet rear base
PLUMBERS
PUTTY
1
2
3
4
Contact Symmons customer service at
(800) 796-6667, (781) 848-2250
Email: customerservice@symmons.com
Monday - Friday 7:30 am - 7:00 pm EST
 Please check Symmons website
Decorative Finishes
Compliance
Append finish suffix code to replacement part
numbers when applicable
-STN Satin nickel
-ORB Oil rubbed bronze
- ASME A112.18.1/CSA B125.1
- NSF/ANSI 61.9, NSF/ANSI 372
- WaterSense 1.0 & 1.5 gpm
Certified by
NSF International
for technical help, the latest product
information and warranty policy.
www.symmons.com/service
Care and Cleaning
Clean finished area using mild soap or
a non-abrasive cleaner and then quickly
rinse with water. A non-abrasive wax
may be used to preserve finish area.
Quick Install Guide Winslet Two Handle Widespread Lavatory Faucet, SLW-5112 Series
p/n LN-02058
Step 10 Flush lines and
check for leaks
LN-02058
Rear view
Step 2
Attach handles
Step 1
Attach control
valves
Step 3
Attach spout
Step 4
Connect hose between
valve and center tee
Step 9
Connect supply lines
(hoses not included)
HOT
COLD
Step 6
Install stopper and
set eye position
Step 8
Connect lift rod,
clevis strap, pivot rod
and adjust linkage
Step 5
Fasten drain body and
tail piece to sink
Pipe
Sealant
Step 7
Attach pivot
rod to drain body
Dimensions Winslet Two Handle Widespread Lavatory Faucet, SLW-5112 Series
p/n LN-02058
8"(203 mm) min
16"(406 mm) max
4" (102 mm) min
2-5/8" ( 66 mm)
4-1/8"
(105 mm)
2-1/4" dia (57 mm)
Deck thickness
1-3/8" (35 mm) max
2-1/2"
(63 mm)
2-3/8" dia
(61 mm)
4-5/8"
(116 mm)
Flexible hose
1/2"-14 NPSM
6-1/8"
(154 mm)
Hole size
1-1/4" (32 mm) min
1-1/2" (38 mm) max
7/8" dia
(21 mm)
Hole size
1-1/16" (27 mm) min
1-7/16" (37 mm) max
7-3/4"
(198 mm)
1" dia
(25 mm)
5/8" (15 mm)
Note: Dimensions subject to change without notice.
Parts Assembly Winslet Two Handle Widespread Lavatory Faucet, SLW-5112 Series
p/n LN-02058
faucet handle
(reference table)
Replacement Parts
Part Number
Item
lift rod
RL-138*
(includes both
hot & cold
handles)
handle
assembly
spout
standard aerator
1.5 gpm
removal tool
washer
flange nut
valve body (hot)
supply
compression nut
(supply hose
not included)
tee
stopper
pop-up drain
assembly
includes stopper
p/n RL-154LR
nut
gasket
spout o-ring
retainer washers
retainer nut
KN-114 (hot)
OFF = CW
KN-113 (cold)
OFF = CCW
valve cartridge
Remove cartridge
using a 17 mm
deep socket
wrench.
valve body
(cold)
flex hose
9/16-24” (3/8” compression)
* Note: When ordering parts for products with an optional
decorative finish, append appropriate three letter finish suffix code
to part numbers marked with an asterisk (*).
Replacement part numbers apply only to faucets
manufactured after Q1 2013, p/n LN-02058 identified on
faucet rear base. Reference page 1, Quick Install Illustration
LN-333-KIT
FLR-102-1.5-KIT
LN-742-KIT
valve cartridge
KN-113
identified
by two
grooves
Kits include aerator and
aerator removal tool
aerator
flow rates
2.2 gpm (8.3 L/min)
1.5 gpm (5.7 L/min)
1.0 gpm (3.8 L/min)
RL-131
1/2 inch supply
compression nuts
(2) included
RL-132*
Lift rod
Ordering replacement parts:
Call Symmons customer service at (800) 796-6667,
(781) 848-2250 M-F 7:30 am - 7:00 pm EST or
check our website at ww.symmons.com for a list
of Symmons distributors.
For California Residents
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2017 Symmons Industries, Inc. ■ symmons.com ■ gethelp@symmons.com ■ ZV-3003 REV G ■ 082817
Download PDF
Similar pages