advertisement
910M, 914M, 918M
Compact Wheel Loaders
Engine Model*
Maximum Rated Gross Power:
ISO 14396
ISO 14396 (DIN)
Bucket Capacity
Full Turn Tip Load
Operating Weight
910M
Cat ® C4.4 ACERT™
74 kW (100 hp)
74 kW (101 hp)
1.3-1.9 m3 (1.7-2.5 yd3)
5099 kg (11,237 lb)
8257 kg (18,199 lb)
*Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
914M
Cat C4.4 ACERT
74 kW (100 hp)
74 kW (101 hp)
1.3-1.9 m3 (1.7-2.5 yd3)
5219 kg (11,503 lb)
8720 kg (19,219 lb)
918M
Cat C4.4 ACERT
86 kW (115 hp)
86 kW (117 hp)
1.3-1.9 m3 (1.7-2.5 yd3)
5845 kg (12,883 lb)
9489 kg (20,914 lb)
Making Your Choice Easy
Effi ciently Powerful
Experience hybrid like fuel effi ciency with an intelligent hydrostatic power train and industry leading fuel savings through a lower maximum engine speed. Power when you need it with
Power-on-Demand technology that increases power when needed for improved speed up a grade.
Work Made Easy
Move more with Caterpillar’s patented quick loading Performance Series buckets and Optimized
Z-bar linkage. Multi-function work has never been so easy, with dedicated pumps for each system and a fl ow sharing implement valve. Simultaneously lift, steer and drive without compromise.
Enjoy All Day Comfort
Have a seat in the M Series Wheel Loader and enjoy excellent all around visibility, whisper quiet sound levels, and low-effort joystick controls while riding on a fully adjustable seat suspension.
Customize Your Experience
Meet your application requirements and individual preferences with Caterpillar’s industry fi rst adjustable power train and implement response settings. Fine tune machine performance with adjustments at your fi ngertips through the soft touch button keypad.
Confi gured for Success
A complete range of optional equipment gives you the versatility to confi gure an M Series Wheel
Loader to be successful in your business.
Contents
Effi ciently Powerful.............................................4
Work Made Easy .................................................6
Enjoy All Day Comfort .........................................8
Customize Your Experience .............................10
Confi gured for Success ...................................11
Serviceability and Customer Support ............12
Wheel Loader Specifi cations .........................13
Bucket Specifi cations ......................................19
Bucket Selection Tables ..................................29
Operating Specifi cations .................................31
Standard Equipment .........................................34
2
Optional Equipment...........................................35
The Cat 910M, 914M and 918M Wheel Loaders set the standard for productivity, fuel effi ciency and operator comfort.
The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a toolcarrier. A high torque, lower speed Cat C4.4 ACERT engine works in concert with an intelligent hystat power train to deliver fuel effi ciency as standard. Meets Tier 4 Final and Stage IV emission standards with a diesel oxidation catalyst designed to manage itself so you can concentrate on your work.
Experience the new industry benchmark.
3
Effi ciently Powerful
Experience hybrid like fuel effi ciency with more power when you need it.
4
Intelligent Power Management
The Caterpillar exclusive Intelligent Power Management system has been further enhanced to monitor operator input and power availability to keep the machine working at peak effi ciency and provide the operator with greater customization to suit their application.
Maximize Fuel Effi ciency
Eco Mode allows you to choose between maximum fuel effi ciency and boosted hydraulic speed.
Eco Mode
• Enabled at the push of a button (Eco).
• Saves up to 5% fuel consumption compared to Standard Mode.
Biggest gains seen during load and carry, snow removal and roading applications.
• Intelligent Hystat maintains maximum ground speed capability.
Standard Mode
• Boosts engine speed by over 20%.
• Increases hydraulic cycle times and productivity.
• Recommended when working on grades or in applications requiring hydro mechanical work tools.
Four Cylinders of Effi cient Power
The Cat C4.4 ACERT engine provides cleaner, quieter operation while delivering superior performance and durability through a high torque, lower speed design. The engine meets Tier 4 Final and Stage IV emission requirements with a clean emissions module that is designed to manage itself so you can concentrate on your work.
• No downtime required with a self-managing aftertreatment system that keeps you on the job.
• Extended fl uid fi ll intervals with minimal use of
Diesel Exhaust Fluid (DEF) also known as Adblue with up to six fuel tank fi lls per DEF fi ll.
• Confi gurable auto idle shut down based on time and ambient temperature to further reduce fuel burn and keep operating costs low.
Power to the Ground
Lock up and go with fully locking front and rear differential axles that can be engaged on the move at full torque with the pull of a trigger on the multifunction joystick to keep you climbing.
Independent service brakes on front and rear axles provide robust stopping performance while a mechanical park brake allows you to safely secure the machine with ease.
5
Work Made Easy
Getting the job done.
6
Optimized Z-bar Linkage
The Caterpillar patented optimized Z-bar linkage combines the digging effi ciency of a traditional Z-bar with integrated toolcarrier capabilities for great performance and versatility.
• Parallelism functionality built into linkage geometry gives truly predictable performance while high tilt forces throughout the working range help you safely and confi dently handle loads with precise control.
• Visibility to bucket corners and fork tips at ground level remain excellent while sight lines at full lift are maximized.
• Lift higher and reach further with optional High Lift linkage available on the 910M and 914M.
Quick Loading Performance Series Buckets
Performance Series Buckets deliver up to 10% higher fi ll factors and better material retention for signifi cant productivity and fuel effi ciency improvements. The buckets feature a longer fl oor to take a bigger bite of the pile, an open throat to heap higher and curved side bars to help with material retention.
Smooth and Predictable Multi-Function Performance
M Series machines feature an electro-hydraulic control system that is governed by the Intelligent Power Management system for peak effi ciency. The load-sensing, variable fl ow system senses work demand and adjusts fl ow and pressure to match the operators request.
• Multi-Function without compromise through dedicated hydraulic systems featuring one pump for the Intelligent
Hydrostatic drive, a second pump for the implements, and a third pump for the steering system. Drive, Lift and
Steer simultaneously with smooth predictable control.
The M Series simply does what you ask it to.
• Programmable in-cab kick-outs on the 918M are easy to set on the go for tilt and lift. This feature is ideal for applications where the work cycle is repeatable allowing you to quickly return to programed set points.
• Effortless hydro-mechanical work tool operation with creep control, throttle lock, and continuous fl ow. This allows the operator to lock in ground speed, engine speed, and auxiliary fl ow and focus only on steering the machine.
7
Enjoy All Day Comfort
Best seat on your job site.
8
Have a Seat and Experience:
• Electro-hydraulic controls featuring a low effort joystick for lift and tilt functions along with integrated Forward/Neutral/
Reverse switch, differential lock trigger and optional third and fourth auxiliary functions.
• Superior all around visibility with a pillarless front windshield, internal and external mirrors, clean hydraulic lines routing, as well as in-line engine mounting for exceptional rear visibility.
• Climate controlled cab with heated rear glass and multiple air vents for a quick defrost.
• Fully adjustable controls including steering column, arm rest and seat suspension.
• Information at a glance with large LCD display on front console.
• An extra eye on the job site with optional rearview camera capability.
• A heated seat option for added comfort in cold weather climates.
Enjoy Coming to Work with:
• A spacious, safe, quiet operator environment featuring ergonomic controls and optional radio with an MP3 and USB port.
• Quickly customizable machine operation with the optional eight button keypad to allow real time adjustments to machine features.
• Comfortable soft stops at cylinder end stroke conditions and programmed kickout points with Caterpillar’s exclusive electrohydraulic cylinder snubbing*.
• An even smoother ride with optional Ride Control when working unloaded and loaded with excellent material retention.
• Early starts and late fi nishes are made easier with optional LED lighting package.
• Dual door access allowing for easy entry in tight working conditions.
*Cylinder snubbing on 918M only.
9
10
Customizable Hydraulic Response
Easily customize the hydraulic performance through the keypad to optimize your effi ciency.
• Operator can tune the machine for slower operation to do fi ne grading or faster operation such as high productivity agricultural applications.
• Fully adjustable ride control activation speed
(through Electronic Technician – ET).
• Control auxiliary work tool operation with proportional
3 rd and 4 th function auxiliary fl ows via thumb rollers.
Customize Your Experience
Make it yours.
Work as one with your machine by easily adjusting the power train and hydraulics to meet your personal preferences or application requirements.
Flexible Power Train
A smooth, step-less electronically controlled hydrostatic transmission provides adjustable power to the ground with excellent groundspeed control and customizable feel.
• Select your directional shift response based on application and operator preference. This setting adjusts the rollout characteristics when shifting from Forward,
Neutral, and Reverse.
• Reduce tire wear using rimpull control which enables you to match available tractive power to underfoot conditions.
• Fine tune ground speed when using work tools such as brooms, snow blowers and brush cutters with Creeper Control.
Machine Coded Start
• The M Series Wheel Loaders offer an additional level of security with coded start option. This allows the owner to set up multiple four or six digit security codes that enable the machine to start.
Confi gured for Success
Ready to work for you.
The Way You Want It
A variety of options are available on the Cat M Series Wheel Loaders to suit your specifi c application needs.
1
2
3
3
1
4
5
Other Options:
1) Auxiliary lights: LED or Halogen
2) Beacon
3) Rearview camera with display*
4) Auxiliary hydraulics: 3 rd
and 4 th
function
5) Front attachment
6) Coupler: IT and ISO
7) Fenders
8) Battery: standard or heavy duty
*Standard equipment in Europe.
8
7
Front Attachment Options:
1) Straight Snow Push
2) Snow Plow
3) Material Handling Arm
4) Flat Floor Bucket
5) Angle Broom
…and many, many more!
1
4
3
6
5
2
11
Service
Schedule your downtime to maximize your up time.
Get up and running quickly with ground level, daily service access. Three large service doors can be opened and closed in any order to give full access to fi lters and service points. Extended service intervals on hydraulic and power train fi lters reduce service time and maximize uptime. Additional service features include:
• Product Link™ with subscription to VisionLink ® to monitor your machine remotely.
• Quick fuel fi lter service with Caterpillar’s exclusive electric fuel priming pump.
• Extended cleanouts with single plane cooling system and wide spaced eight fi ns per inch coolers as standard.
• Easy battery terminal access for jump starts.
• Eco drain valve avoids costly fl uid spills when servicing the machine.
12
Renowned Cat Dealer Support
Rely on your Cat dealer to help you every step of the way with new or used machine sales, rental or rebuild options to meet your business needs.
Maximize your machine uptime with unsurpassed worldwide parts availability, trained technicians and customer support agreements.
Let us earn your business. Experience an M Series
Wheel Loader and join the Caterpillar family.
Customer Support
Unmatched service makes the difference.
910M, 914M, 918M Compact Wheel Loaders Specifications
Engine
Cat C4.4 ACERT
Maximum Rated Gross Power
Maximum Engine Speed
SAE J1995
ISO 14396
ISO 14396 (DIN)
Rated Net Power
SAE J1349
ISO 9249
ISO 9249 (DIN)
Maximum Gross Torque
SAE J1995
ISO 14396
Maximum Net Torque
SAE J1349
ISO 9249
Displacement
Bore
Stroke
2,350 rpm
76 kW
74 kW
74 kW
910M
102 hp
100 hp
101 hp
2,200 rpm
72 kW
72 kW
72 kW
455 N·m
450 N·m
441 N·m
446 N·m
4.4 L
105 mm
127 mm
96 hp
97 hp
98 hp
336 lbf-ft
332 lbf-ft
325 lbf-ft
329 lbf-ft
268 in3
4.13 in
5 in
76 kW
74 kW
74 kW
2,200 rpm
72 kW
72 kW
72 kW
455 N·m
450 N·m
441 N·m
446 N·m
4.4 L
105 mm
127 mm
914M
2,350 rpm
102 hp
100 hp
101 hp
96 hp
97 hp
98 hp
336 lbf-ft
332 lbf-ft
325 lbf-ft
329 lbf-ft
268 in3
4.13 in
5 in
918M
2,350 rpm
87 kW
86 kW
86 kW
83 kW
84 kW
84 kW
504 N·m
500 N·m
490 N·m
495 N·m
4.4 L
105 mm
127 mm
117 hp
115 hp
117 hp
2,200 rpm
112 hp
113 hp
114 hp
372 lbf-ft
369 lbf-ft
361 lbf-ft
365 lbf-ft
268 in3
4.13 in
5 in
• Net power ratings are tested at the reference conditions for the specifi ed standard.
• Net power advertised is the power available at the fl ywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffl er and alternator.
• The Cat C4.4 ACERT engine meets Tier 4 Final/Stage IV off-highway emission standards.
Engine Torque
910M/914M 918M
lbf-ft N·m
550
350
450 kW hp
100
120
80 lbf-ft N·m
550
350
450 kW hp
100
120
80
250
350
150
250
150
800
60
80
1,000 1,200 1,400 1,600 1,800
40
Power
Torque
2,000
20
2,200 rpm
40
250
350
150
250
150
800
60
80
1,000 1,200 1,400 1,600 1,800
40
Power
Torque
2,000
20
2,200 rpm
40
Cab
• ROPS: ISO 3471:2008.
• FOPS: ISO 3449:2005 Level II.
• The declared dynamic operator around pressures levels per ISO 6396:2008*, when properly installed and maintained, is 75 dB(A).
• The labeled sound power level for the CE marked confi gurations when measured according to the test procedure and conditions specifi ed in 2000/14/EC is 103 dB(A).
* The measurements were conducted with the cab doors and windows closed.
13
910M, 914M, 918M Wheel Loader Specifications
Loader Hydraulic System
Maximum Flow – Implement Pump
3 rd
Function, Maximum Flow, Standard
3 rd
Function, Maximum Flow, High
4 th
Function, Maximum Flow
Maximum Working Pressure – Implement Pump
Relief Pressure – Tilt Cylinder
3 rd and 4 th Function Maximum Working Pressure
3 rd
and 4 th
Function Relief Pressure
Lift Cylinder: Double Acting
Bore Diameter
Rod Diameter
Stroke
Tilt Cylinder: Double Acting
Bore Diameter
Rod Diameter
Stroke
Cycle Times
Raise (ground level to maximum lift)
Dump (at maximum lift height)
Rack Back
Float Down (maximum lift to ground level)
Total Cycle Time
Power Train
• 910M implement system is open center control with the use of a gear pump.
• 914M and 918M implement system uses a dedicated load sensing variable displacement pump.
• Loader linkage utilizes dual double acting lift cylinders and a single double acting tilt cylinder.
122 L/min
910M
32 gal/min
90 L/min
N/A
90 L/min
23 500 kPa
34 000 kPa
21 000 kPa
28 000 kPa
24 gal/min
N/A
24 gal/min
3,408 psi
4,931 psi
3,046 psi
4,061 psi
148 L/min
914M
90 L/min
120 L/min
90 L/min
28 000 kPa
34 000 kPa
21 000 kPa
28 000 kPa
39 gal/min
24 gal/min
32 gal/min
24 gal/min
4,061 psi
4,931 psi
3,046 psi
4,061 psi
165 L/min
918M
95 L/min
150 L/min
95 L/min
28 000 kPa
32 000 kPa
32 000 kPa
32 000 kPa
44 gal/min
25 gal/min
40 gal/min
25 gal/min
4,061 psi
4,641 psi
4,641 psi
4,641 psi
100 mm
60 mm
593 mm
100 mm
60 mm
578 mm
5.2 seconds
1.4 seconds
2.2 seconds
3.7 seconds
12.5 seconds
3.9 in
2.4 in
23.3 in
3.9 in
2.4 in
22.8 in
100 mm
60 mm
593 mm
100 mm
60 mm
578 mm
5.2 seconds
1.4 seconds
2.2 seconds
3.7 seconds
12.5 seconds
3.9 in
2.4 in
23.3 in
3.9 in
2.4 in
22.8 in
100 mm
60 mm
547 mm
110 mm
60 mm
581 mm
4.8 seconds
1.8 seconds
2.2 seconds
2.7 seconds
11.5 seconds
3.9 in
2.4 in
21.5 in
4.3 in
2.4 in
22.9 in
14
Front Axle
Traction Aid**
Rear Axle
Oscillation
Traction aid
Brakes
Service
Park
• Differential lock can be engaged on the go at full torque up to 2.5 km/h (1.6 mph) and stays active up to 10 km/h (6.3 mph).
910M 914M 918M
Fixed Fixed Fixed
Locking differential (std.) Locking differential (std.) Locking differential (std.)
Oscillating
± 11°
Oscillating
± 11°
Oscillating
± 11°
Locking differential (std.) Locking differential (std.) Locking differential (std.)
Inboard wet disc
Cable applied, spring released
Inboard wet disc
Cable applied, spring released
Inboard wet disc
Cable applied, spring released
910M, 914M, 918M Wheel Loader Specifications
Steering
• 910M steering system used a gear pump with priority fl ow control.
• 914M and 918M steering system uses a dedicated load sensing variable displacement pump.
• Steering system utilizes dual double acting steering cylinders.
Steering Articulation Angle (each direction)
Steering Cylinder: Double Acting
Bore Diameter
Rod Diameter
Stroke
Maximum Flow – Steering Pump
Maximum Working Pressure – Steering Pump
Maximum Steering Torque
0° (straight machine)
40° (full turn)
Steering Cycle Times (full left to full right)
At 2,350 rpm: 90 rpm Steering Wheel Speed
Number of Steering Wheel Turns
Full Left to Full Right or Full Right to Full Left
Transmission
60 mm
35 mm
400 mm
66 L/min
18 500 kPa
910M
40°
2.4 in
1.4 in
15.7 in
17 gal/min
2,683 psi
60 mm
35 mm
400 mm
82 L/min
22 500 kPa
914M
40°
2.4 in
1.4 in
15.7 in
22 gal/min
3,263 psi
60 mm
35 mm
400 mm
82 L/min
20 000 kPa
918M
40°
2.4 in
1.4 in
15.7 in
22 gal/min
2,901 psi
50 375 N·m 37,155 lbf-ft 50 375 N·m 37,155 lbf-ft 57 630 N·m 42,506 lbf-ft
37 620 N·m 27,747 lbf-ft 37 620 N·m 27,747 lbf-ft 42 570 N·m 31,398 lbf-ft
3.2 seconds
3.75 turns
2.8 seconds
3.75 turns
2.3 seconds
3.4 turns
Forward and Reverse
Low Range, Speed Range 1*
Low Range, Speed Range 2
High Range (optional)
Service Refill Capacities
Fuel Tank
Cooling System
Engine Crankcase
Front Axles
Rear Axles
Hydraulic System (including tank)
Hydraulic Tank
Transmission
Diesel Exhaust Fluid (DEF) Tank
* Creeper control allows for speed control from a stand still up to 10 km/h (6.3 mph).
The Creeper Control will only work in Range 1.
10 km/h
20 km/h
40 km/h
910M
6.3 mph
12.5 mph
25 mph
10 km/h
20 km/h
40 km/h
914M
6.3 mph
12.5 mph
25 mph
10 km/h
20 km/h
40 km/h
918M
6.3 mph
12.5 mph
25 mph
• DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
910M 914M 918M
154 L
21.5 L
40.7 gal
5.7 gal
154 L
21.5 L
40.7 gal
5.7 gal
154 L
21.5 L
40.7 gal
5.7 gal
8.8 L
7.5 L
7.5 L
98 L
55 L
3.4 L
18.9 L
2.3 gal
2 gal
2 gal
25.9 gal
14.5 gal
0.9 gal
5 gal
8.8 L
7.5 L
7.5 L
98 L
55 L
3.4 L
18.9 L
2.3 gal
2 gal
2 gal
25.9 gal
14.5 gal
0.9 gal
5 gal
8.8 L
17 L
17 L
98 L
55 L
3.4 L
18.9 L
2.3 gal
4.5 gal
4.5 gal
25.9 gal
14.5 gal
0.9 gal
5 gal
15
910M, 914M, 918M Wheel Loader Specifications
Dimensions with Bucket
All dimensions are approximate. Dimensions will vary with bucket, and tire choice. Refer to Operating Specifi cations with Buckets.
23
17
19
13
12
11
10
9
25
24 14
1
2
27
22
21
*Vary with bucket.
**Vary with tire.
** 1 Height: Ground to Cab
** 2 Height: Ground to Beacon
** 3 Height: Ground Axle Center
** 4 Height: Ground Clearance
* 5 Length: Overall
6 Length: Rear Axle to Bumper
7 Length: Hitch to Front Axle
8 Length: Wheel Base
* 9 Clearance: Bucket at 45°
** 10 Clearance: Load over Height
** 11 Clearance: Level Bucket
** 12 Height: Bucket Pin
** 13 Height: Overall
* 14 Reach: Bucket at 45°
15 Carry Height: Bucket Pin
** 16 Dig Depth
17 Width: Bucket
18 Width: Tread Center
19 Turning Radius: Over Bucket
20 Width: Over Tires
21 Turning Radius: Outside of Tires
22 Turning Radius: Inside of Tires
23 Rack Angle at Full Lift
24 Dump Angle at Full Lift
25 Rack Angle at Carry
26 Departure Angle
27 Articulation Angle
16
15
7
4
3
26
6
5
8
18
20 mm
910M ft/in
Standard Lift – Pin On
914M mm ft/in mm
918M ft/in mm
High Lift – Pin On
910M ft/in mm
914M ft/in
3020 9'10" 3093 10'1" 3110 10'2" 3020 9'10" 3093 10'1"
3210 10'6" 3283 10'9" 3300 10'9" 3210 10'6" 3283 10'9"
600 1'11" 640 2'1" 640 2'1" 600 1'11" 640 2'1"
348 1'1" 405 1'3" 438 1'5" 348 1'1" 405 1'3"
6226 20'5" 6291 20'7" 6617 21'8" 6758 22'2" 6834 22'5"
1590
1300
2600
5'2"
4'3"
8'6"
1600
1300
2600
5'2"
4'3"
8'6"
1615
1350
5'3"
4'5"
1590
1300
2700 8'10" 2600
5'2"
4'3"
8'6"
1600
1300
2600
5'2"
4'3"
8'6"
2846 9'4" 2820 9'3" 2857 9'4" 3219 10'6" 3188 10'5"
3284 10'9" 3315 10'10" 3381 11'1" 3397 11'1" 3429 11'2"
3419 11'2" 3447 11'3" 3563 11'8" 3775 12'4" 3800 12'5"
3673 12'0" 3701 12'1" 3818 12'6" 4030 13'2" 4055 13'3"
4534 14'10" 4621 15'1" 4859 15'11" 4891 16'0" 4974 16'3"
759 2'5" 790 2'7" 902 2'11" 1004 3'3" 1029 3'4"
319
116
1'0"
4.5"
317
89
1'0"
3.4"
353
60
1'1"
2.3"
480
294
1'6"
11.5"
483
272
1'6"
10.7"
2401 7'10" 2401 7'10" 2401 7'10" 2401 7'10" 2401 7'10"
1800 5'10" 1800 5'10" 1800 5'10" 1800 5'10" 1800 5'10"
5180 16'11" 5200 17'0" 5400 17'8" 5419 17'9" 5448 17'10"
2259 7'4" 2259 7'4" 2259 7'4" 2259 7'4" 2259 7'4"
4716 15'5" 4741 15'6" 4877 16'0" 4716 15'5" 4741 15'6"
2446
57°
8'0" 2426
57°
7'11" 2563
55°
8'4" 2446
59°
8'0" 2426
59°
7'11"
47°
42°
33°
40°
48°
41°
33°
40°
47°
44°
33°
40°
43°
50°
33°
40°
44°
49°
33°
40°
kg lb kg lb kg lb kg lb kg lb
7917 17,450 8380 18,469 9318 20,537 8482 18,693 8906 19,629 Operating Weight
Dimensions listed are for a machine configured with general purpose Pin On bucket, bolt-on cutting edge, optional counterweights, standard guarding, 80 kg (176 lb) operator and Michelin 15.5 R25 (L2) XTLA tires for 910M and Michelin 17.5 R25 (L2) XTLA tires for 914M and 918M.
16
910M, 914M, 918M Wheel Loader Specifications
Dimensions with Bucket
All dimensions are approximate. Dimensions will vary with bucket, and tire choice. Refer to Operating Specifi cations with Buckets.
23
17
19
13
12
11
10
9
25
24 14
1
2
27
22
21
*Vary with bucket.
**Vary with tire.
** 1 Height: Ground to Cab
** 2 Height: Ground to Beacon
** 3 Height: Ground Axle Center
** 4 Height: Ground Clearance
* 5 Length: Overall
6 Length: Rear Axle to Bumper
7 Length: Hitch to Front Axle
8 Length: Wheel Base
* 9 Clearance: Bucket at 45°
** 10 Clearance: Load over Height
** 11 Clearance: Level Bucket
** 12 Height: Bucket Pin
** 13 Height: Overall
* 14 Reach: Bucket at 45°
15 Carry Height: Bucket Pin
** 16 Dig Depth
17 Width: Bucket
18 Width: Tread Center
19 Turning Radius: Over Bucket
20 Width: Over Tires
21 Turning Radius: Outside of Tires
22 Turning Radius: Inside of Tires
23 Rack Angle at Full Lift
24 Dump Angle at Full Lift
25 Rack Angle at Carry
26 Departure Angle
27 Articulation Angle
16
15
7
4
3
26
6
5
8
18
20 mm
910M ft/in
Standard Lift – IT mm
914M ft/in mm
918M ft/in mm
910M
High Lift – IT ft/in mm
914M ft/in
3020 9'10" 3093 10'1" 3110 10'2" 3020 9'10" 3093 10'1"
3210 10'6" 3283 10'9" 3300 10'9" 3210 10'6" 3283 10'9"
600 1'11" 640 2'1" 640 2'1" 600 1'11" 640 2'1"
348 1'1" 405 1'3" 438 1'5" 348 1'1" 405 1'3"
6373 20'10" 6433 21'1" 6719 22'0" 6825 22'4" 6905 22'7"
1590
1300
2600
5'2"
4'3"
8'6"
1600
1300
2600
5'2"
4'3"
8'6"
1615
1350
5'3"
4'5"
1590
1300
2700 8'10" 2600
5'2"
4'3"
8'6"
1600
1300
2600
5'2"
4'3"
8'6"
2747 9'0" 2722 8'11" 2780 9'1" 3176 10'5" 3141 10'3"
3284 10'9" 3315 10'10" 3381 11'1" 3397 11'1" 3429 11'2"
3418 11'2" 3446 11'3" 3563 11'8" 3774 12'4" 3800 12'5"
3673 12'0" 3701 12'1" 3818 12'6" 4030 13'2" 4055 13'3"
4646 15'2" 4731 15'6" 4928 16'1" 4920 16'1" 5027 16'5"
867 2'10" 891 2'11" 966 3'2" 1054 3'5" 1083 3'6"
319
116
1'0"
4.5"
317
90
1'0"
3.5"
353
60
1'1"
2.3"
480
295
1'6"
11.6"
483
273
1'6"
10.7"
2401 7'10" 2401 7'10" 2401 7'10" 2401 7'10" 2401 7'10"
1800 5'10" 1800 5'10" 1800 5'10" 1800 5'10" 1800 5'10"
5223 17'1" 5244 17'2" 5434 17'9" 5440 17'10" 5471 17'11"
2259 7'4" 2259
2397 7'10" 2507
2017
57°
6'7" 2126
57°
7'4"
8'2"
6'11"
2259 7'4" 2259
2402 7'10" 2397 7'10" 2507
2031
54°
7'4"
6'7"
2259
2017
59°
6'7" 2126
59°
7'4"
8'2"
6'11"
47°
42°
33°
40°
47°
41°
33°
40°
47°
43°
33°
40°
44°
50°
33°
40°
44°
49°
33°
40°
kg lb kg lb kg lb kg lb kg lb
8297 18,286 8754 19,294 9543 21,032 8821 19,442 9095 20,044 Operating Weight
Dimensions listed are for a machine configured with general purpose IT bucket, bolt-on cutting edge, optional counterweights, standard guarding, 80 kg (176 lb) operator and Michelin 15.5 R25 (L2) XTLA tires for 910M and Michelin 17.5 R25 (L2) XTLA tires for 914M and 918M.
17
910M, 914M, 918M Wheel Loader Specifications
Dimensions with Bucket
All dimensions are approximate. Dimensions will vary with bucket, and tire choice. Refer to Operating Specifi cations with Buckets.
23
17
19
13
12
11
10
9
25
24 14
1
2
27
22
21
*Vary with bucket.
**Vary with tire.
** 1 Height: Ground to Cab
** 2 Height: Ground to Beacon
** 3 Height: Ground Axle Center
** 4 Height: Ground Clearance
* 5 Length: Overall
6 Length: Rear Axle to Bumper
7 Length: Hitch to Front Axle
8 Length: Wheel Base
* 9 Clearance: Bucket at 45°
** 10 Clearance: Load over Height
** 11 Clearance: Level Bucket
** 12 Height: Bucket Pin
** 13 Height: Overall
* 14 Reach: Bucket at 45°
15 Carry Height: Bucket Pin
** 16 Dig Depth
17 Width: Bucket
18 Width: Tread Center
19 Turning Radius: Over Bucket
20 Width: Over Tires
21 Turning Radius: Outside of Tires
22 Turning Radius: Inside of Tires
23 Rack Angle at Full Lift
24 Dump Angle at Full Lift
25 Rack Angle at Carry
26 Departure Angle
27 Articulation Angle
16
15
7
4
3
26
6
5
8
18
20 mm
910M ft/in
Standard Lift – ISO mm
914M ft/in mm
918M ft/in mm
910M
High Lift – ISO ft/in mm
914M ft/in
3020 9'10" 3093 10'1" 3110 10'2" 3020 9'10" 3093 10'1"
3210 10'6" 3283 10'9" 3300 10'9" 3210 10'6" 3283 10'9"
600 1'11" 640 2'1" 640 2'1" 600 1'11" 640 2'1"
348 1'1" 405 1'3" 438 1'5" 348 1'1" 405 1'3"
6429 21'1" 6489 21'3" 6768 22'2" 6882 22'6" 6962 22'10"
1590
1300
2600
5'2"
4'3"
8'6"
1600
1300
2600
5'2"
4'3"
8'6"
1615
1350
5'3"
4'5"
1590
1300
2700 8'10" 2600
5'2"
4'3"
8'6"
1600
1300
2600
5'2"
4'3"
8'6"
2709 8'10" 2684 8'9" 2754 9'0" 3140 10'3" 3105 10'2"
3284 10'9" 3315 10'10" 3381 11'1" 3397 11'1" 3429 11'2"
3418 11'2" 3446 11'3" 3564 11'8" 3774 12'4" 3799 12'5"
3673 12'0" 3701 12'1" 3818 12'6" 4030 13'2" 4055 13'3"
4667 15'3" 4765 15'7" 4962 16'3" 4955 16'3" 5048 16'6"
909 2'11" 933 3'0" 1013 3'3" 1100 3'7" 1127 3'8"
317
117
1'0"
4.5"
322
90
1'0"
3.5"
345
60
1'1"
2.3"
448
295
1'5"
11.6"
455
273
1'5"
10.7"
2401 7'10" 2401 7'10" 2401 7'10" 2401 7'10" 2401 7'10"
1800 5'10" 1800 5'10" 1800 5'10" 1800 5'10" 1800 5'10"
5239 17'2" 5262 17'3" 5445 17'10" 5452 17'10" 5484 17'11"
2259 7'4" 2259
2395 7'10" 2492
2015
57°
6'7" 2110
57°
7'4"
8'2"
6'11"
2259
2376
2004
55°
7'4"
7'9"
6'6"
2259 7'4" 2259
2395 7'10" 2492
2015
60°
6'7" 2110
59°
7'4"
8'2"
6'11"
47°
43°
33°
40°
47°
41°
33°
40°
47°
43°
33°
40°
44°
49°
33°
40°
44°
48°
33°
40°
kg lb kg lb kg lb kg lb kg lb
8318 18,333 8776 19,342 9565 21,082 8844 19,491 9116 20,091 Operating Weight
Dimensions listed are for a machine configured with general purpose ISO bucket, bolt-on cutting edge, optional counterweights, standard guarding, 80 kg (176 lb) operator and Michelin 15.5 R25 (L2) XTLA tires for 910M and Michelin 17.5 R25 (L2) XTLA tires for 914M and 918M.
18
Bucket Specifications
910M Operating Specifications with Buckets
Standard Lift – General Purpose
Rated Capacity 100% (including BOCE)
Rated Capacity 110% (including BOCE)
Struck Capacity
17 Width: Bucket
Nominal Material Density, 100% Fill Factor
Nominal Material Density, 110% Fill Factor
9 Clearance: Full Lift, 45° Dump
14 Reach: Full Lift, 45° Dump
Reach: 2130 mm (7'0") Clearance, 45° Dump
Reach: Level Arm, Level Bucket
16 Dig Depth
5 Length: Overall
13 Height: Overall
19 Turning Radius: Bucket at Carry
Tipping Load – Straight, ISO 14397-1*
Tipping Load – Straight, Rigid Tire**
Tipping Load – Full Turn, ISO 14397-1*
Tipping Load – Full Turn, Rigid Tire**
Breakout Force
Operating Weight
Pin On IT
m 3 yd 3 m
3 yd
3 m 3 yd 3 mm 2401 ft/in 7'10" kg/m 3 1829 lb/yd 3 3,135 kg/m
3 lb/yd
3
1707
3,002 mm ft/in
2846
9'4"
1.4
1.8
1.5
2.0
1.25
1.6
2401
7'10"
1578
2,650
1485
2,691
2792
9'1"
1.6
2.1
1.7
2.2
1.45
1.9
2401
7'10"
1385
2,289
1312
2,337
2738
8'11"
1.8
2.4
1.9
2.5
1.65
2.2
2401
7'10"
1939
3,269
1801
3,284
2809
9'2"
1.3
1.7
1.4
1.8
1.15
1.5
2401
7'10"
1657
2,739
1554
2,775
2747
9'0"
1.5
2.0
1.6
2.1
1.35
1.8
2401
7'10"
1544
2,593
1453
2,633
2721
8'11"
1.6
2.1
1.7
2.2
1.45
1.9
mm ft/in mm ft/in mm ft/in mm in
759
2'5"
1338
4'4"
2026
6'7"
116
4.5"
811
2'7"
1361
4'5"
2101
6'10"
116
4.5"
858
2'9"
1377
4'6"
2175
7'1"
116
4.6"
820
2'8"
1380
4'6"
2092
6'10"
117
4.6"
867
2'10"
1392
4'6"
2172
7'1"
116
4.6"
888
2'10"
1397
4'7"
2207
7'2"
116
4.6" mm 6226 ft/in 20'5" mm 4534 ft/in 14'10"
6301
20'8"
4593
15'0"
6375
20'10"
4681
15'4"
6293
20'7"
4563
14'11"
6373
20'10"
4646
15'2"
6407
21'0"
4653
15'3"
6444
21'1"
4703
15'5" mm 5180 ft/in 16'11"
5202
17'0"
5224
17'1"
5199
17'0"
5223
17'1"
5234
17'2"
5245
17'2" kg 6036 5959 5887 5972 5895 5862 5825 lb 13,302 13,132 12,975 13,162 12,992 12,920 12,838
910
2'11"
1402
4'7"
2243
7'4"
117
4.6" kg 6287 6207 6132 6221 6141 6106 6068 lb 13,856 13,681 13,515 13,710 13,534 13,458 13,373 kg 5121 5051 4984 5042 4971 4941 4907 lb 11,286 11,131 10,985 11,113 10,957 10,890 10,815 kg 5448 5373 5303 5364 5289 5257 5220 lb 12,007 11,841 11,686 11,822 11,656 11,585 11,505 kgf 7326 6691 6162 6739 6156 5933 5715 lbf 16,146 14,745 13,580 14,853 13,567 13,077 12,595 kg 7917 7956 7992 8257 8297 8313 8331 lb 17,450 17,535 17,613 18,199 18,286 18,321 18,360
2401
7'10"
1443
2,458
1363
2,397
2694
8'10"
1.7
2.2
1.8
2.4
1.55
2.0
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
Dimensions listed are for a 910M configured with bucket, bolt-on cutting edge, optional counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 15.5 R25 (L2) XTLA tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
19
Bucket Specifications
910M Operating Specifications with Buckets
Standard Lift – General Purpose
Rated Capacity 100% (including BOCE)
Rated Capacity 110% (including BOCE)
Struck Capacity
17 Width: Bucket
Nominal Material Density, 100% Fill Factor
Nominal Material Density, 110% Fill Factor
9 Clearance: Full Lift, 45° Dump
14 Reach: Full Lift, 45° Dump
Reach: 2130 mm (7'0") Clearance, 45° Dump
Reach: Level Arm, Level Bucket
16 Dig Depth
5 Length: Overall
13 Height: Overall
19 Turning Radius: Bucket at Carry
Tipping Load – Straight, ISO 14397-1*
Tipping Load – Straight, Rigid Tire**
Tipping Load – Full Turn, ISO 14397-1*
Tipping Load – Full Turn, Rigid Tire**
Breakout Force
Operating Weight mm ft/in mm ft/in mm ft/in kg lb mm ft/in mm ft/in mm ft/in mm in kg lb kgf lbf kg lb kg lb kg lb mm ft/in kg/m 3 lb/yd 3 kg/m
3 lb/yd
3 mm ft/in m 3 yd 3 m
3 yd
3 m 3 yd 3
1.3
1.7
1.4
1.8
1.15
1.5
2401
7'10"
1892
3,189
1757
3,204
2772
9'1"
863
2'9"
1403
4'7"
2149
7'0"
117
4.6"
6350
20'10"
4599
15'1"
5216
17'1"
5833
12,857
6077
13,392
4920
10,844
5234
11,536
6297
13,877
8280
18,248
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
Dimensions listed are for a 910M configured with bucket, bolt-on cutting edge, optional counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 15.5 R25 (L2) XTLA tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
6499
21'3"
4737
15'6"
5261
17'3"
5678
12,513
952
3'1"
1420
4'7"
2298
7'6"
117
4.6"
5914
13,034
4776
10,526
5081
11,198
5304
11,690
8352
18,408
2401
7'10"
1405
2,392
1327
2,333
2656
8'8"
1.7
2.2
1.8
2.4
1.55
2.0
ISO 23727
6429
21'1"
4667
15'3"
5239
17'2"
5759
12,692
909
2'11"
1411
4'7"
2228
7'3"
117
4.6"
5999
13,221
4852
10,693
5161
11,375
5785
12,750
8318
18,333
2401
7'10"
1617
2,673
1516
2,708
2709
8'10"
1.5
2.0
1.6
2.1
1.35
1.8
ISO Flat Floor
6426
21'0"
4675
15'4"
5239
17'2"
5658
12,469
970
3'2"
1502
4'11"
2227
7'3"
115
4.5"
5894
12,989
4753
10,475
5038
11,103
5689
12,538
8399
18,510
2401
7'10"
1584
2,619
1485
2,644
2759
9'0"
1.5
2.0
1.6
2.1
1.0
1.3
6459
21'2"
4697
15'4"
5249
17'2"
5631
12,409
1192
3'10"
1821
5'11"
2259
7'4"
115
4.5"
5865
12,926
4728
10,419
5011
11,044
5467
12,048
8414
18,543
2401
7'10"
1477
2,481
1390
2,510
2945
9'7"
1.6
2.1
1.7
2.2
1.1
1.4
20
Bucket Specifications
910M Operating Specifications with Buckets
High Lift – General Purpose
Rated Capacity 100% (including BOCE)
Rated Capacity 110% (including BOCE)
Struck Capacity
17 Width: Bucket
Nominal Material Density, 100% Fill Factor
Nominal Material Density, 110% Fill Factor
9 Clearance: Full Lift, 45° Dump
14 Reach: Full Lift, 45° Dump
Reach: 2130 mm (7'0") Clearance, 45° Dump
Reach: Level Arm, Level Bucket
16 Dig Depth
5 Length: Overall
13 Height: Overall
19 Turning Radius: Bucket at Carry
Tipping Load – Straight, ISO 14397-1*
Tipping Load – Straight, Rigid Tire**
Tipping Load – Full Turn, ISO 14397-1*
Tipping Load – Full Turn, Rigid Tire**
Breakout Force
Operating Weight
Pin On IT
m 3 yd 3 m
3 yd
3
1.4
1.8
1.5
2.0
m 3 1.25
yd 3 1.6
1.6
2.1
1.7
2.2
1.45
1.9
1.8
2.4
1.9
2.5
1.65
2.2
1.9
2.5
2.0
2.6
1.75
2.3
1.3
1.7
1.4
1.8
1.15
1.5
1.5
2.0
1.6
2.1
1.35
1.8
1.6
2.1
1.7
2.2
1.45
1.9
1.7
2.2
1.8
2.4
1.55
2.0
mm 2401 2401 2401 2401 2401 2401 2401 2401 2401 ft/in 7'10" 7'10" 7'10" 7'10" 7'10" 7'10" 7'10" 7'10" 7'10" kg/m 3 1705 1473 1295 1220 1803 1543 1439 1346 1183 lb/yd 3 2,922 2,474 2,140 2,043 3,039 2,551 2,416 2,293 1,982 kg/m
3 lb/yd
3
1591
2,798
1387
2,512
1226
2,185
1159
2,090
1674
3,053
1447
2,585
1354
2,454
1271
2,235
1124
2,028 mm 3219 3171 3123 3101 3176 3125 3102 3079 3026 ft/in 10'6" 10'4" 10'2" 10'2" 10'5" 10'3" 10'2" 10'1" 9'11"
1.9
2.5
2.0
2.6
1.75
2.3
mm 1004 1061 1118 1143 ft/in 3'3" 3'5" 3'7" 3'9" mm 1798 1826 1848 1857 ft/in 5'10" 5'11" 6'0" 6'1"
1054 1115 1142 1169 1208
3'5" 3'7" 3'8" 3'10" 3'11"
1843 1861 1870 1878 1881
6'0" 6'1" 6'1" 6'1" 6'2" mm 2441 2516 2590 2624 ft/in 8'0" 8'3" 8'5" 8'7"
2507 2587 2621 2657 2725
8'2" 8'5" 8'7" 8'8" 8'11" mm 294 294 294 294 295 295 295 295 294 in 11.6" 11.6" 11.6" 11.6" 11.6" 11.6" 11.6" 11.6" 11.6" mm 6758 6834 6907 6941 6825 6905 6939 6976 7043 ft/in 22'2" 22'5" 22'7" 22'9" 22'4" 22'7" 22'9" 22'10" 23'1" mm 4891 4949 5037 5071 4920 5002 5009 5059 5140 ft/in 16'0" 16'2" 16'6" 16'7" 16'1" 16'4" 16'5" 16'7" 16'10" mm 5419 5443 5466 5476 5440 5465 5476 5487 5514 ft/in 17'9" 17'10" 17'11" 17'11" 17'10" 17'11" 17'11" 18'0" 18'1" kg 5677 5614 5556 5529 5604 5542 5515 5484 5398 lb 12,511 12,373 12,244 12,186 12,352 12,213 12,154 12,087 11,896 kg 5913 5848 5787 5760 5838 5772 5745 5713 5623 lb 13,032 12,889 12,755 12,694 12,866 12,722 12,661 12,591 12,392 kg 4773 4715 5660 4636 4688 4630 4605 4577 4497 lb 10,519 10,391 10,271 10,217 10,333 10,204 10,149 10,087 9,911 kg 5077 5016 4958 4932 4988 4925 4899 4869 4784 lb 11,190 11,054 10,926 10,869 10,992 10,855 10,797 10,730 10,544 kgf 7391 6750 6217 5997 6798 6210 5986 5766 5339 lbf 16,289 14,877 13,702 13,217 14,983 13,687 13,193 12,707 11,767 kg 8482 8521 8556 8572 8821 8861 8877 8895 8949 lb 18,693 18,779 18,857 18,892 19,442 19,529 19,564 19,604 19,722
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
Dimensions listed are for a 910M configured with bucket, bolt-on cutting edge, optional counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 15.5 R25 (L2) XTLA tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
21
Bucket Specifications
910M Operating Specifications with Buckets
High Lift – General Purpose
Rated Capacity 100% (including BOCE)
Rated Capacity 110% (including BOCE)
Struck Capacity
17 Width: Bucket
Nominal Material Density, 100% Fill Factor
Nominal Material Density, 110% Fill Factor
9 Clearance: Full Lift, 45° Dump
14 Reach: Full Lift, 45° Dump
Reach: 2130 mm (7'0") Clearance, 45° Dump
Reach: Level Arm, Level Bucket
16 Dig Depth
5 Length: Overall
13 Height: Overall
19 Turning Radius: Bucket at Carry
Tipping Load – Straight, ISO 14397-1*
Tipping Load – Straight, Rigid Tire**
Tipping Load – Full Turn, ISO 14397-1*
Tipping Load – Full Turn, Rigid Tire**
Breakout Force
Operating Weight
ISO 23727 ISO Flat Floor
m 3 yd 3 m
3 yd
3 m 3 yd 3 mm 2401 ft/in 7'10" kg/m 3 1766 lb/yd 3 2,977 kg/m
3 lb/yd
3
1640
2,991 mm 3140 ft/in 10'3"
1.3
1.7
1.4
1.8
1.15
1.5
2401
7'10"
1512
2,499
1417
2,532
3090
10'1"
1.5
2.0
1.6
2.1
1.35
1.8
2401
7'10"
1316
2,241
1243
2,186
3044
9'11"
1.7
2.2
1.8
2.4
1.55
2.0
2401
7'10"
1158
1,940
1100
1,984
3004
9'10"
1.9
2.5
2.0
2.6
1.75
2.3
2401
7'10"
1480
2,446
1387
2,470
3116
10'2"
1.5
2.0
1.6
2.1
1.0
1.3
2401
7'10"
1381
2,319
1300
2,346
3302
10'9"
1.6
2.1
1.7
2.2
1.1
1.4
mm ft/in mm ft/in
1100
3'7"
1869
6'1" mm ft/in
2564
8'4" mm 295 in 11.6"
1160
3'9"
1884
6'2"
2643
8'8"
295
11.6"
1214
3'11"
1900
6'2"
2713
8'10"
295
11.6"
1259
4'1"
1915
6'3"
2775
9'1"
293
11.6"
1190
3'10"
1971
6'5"
2641
8'7"
294
11.6"
1411
4'7"
2272
7'5"
2674
8'9"
294
11.6" mm 6882 ft/in 22'6" mm 4955 ft/in 16'3"
6961
22'10"
5023
16'5"
7031
23'0"
5094
16'8"
7092
23'3"
5174
16'11"
6959
22'9"
5031
16'6"
6991
22'11"
5053
16'6"
7063
23'2"
5139
16'10" mm 5452 5478 ft/in 17'10" 17'11"
5500
18'0"
5521
18'1"
5478
17'11"
5488
18'0"
5512
18'1" kg 5496 5435 5370 5292 5337 5315 5250 lb 12,112 11,977 11,834 11,662 11,762 11,713 11,570
1237
4'0"
1909
6'3"
2746
9'0"
294
11.6" kg 5725 5661 5593 5512 5559 5536 5468 lb 12,617 12,476 12,327 12,148 12,252 12,201 12,052 kg 4593 4536 lb 10,122 9,996
4475
9,862
4401
9,699
4440
9,785
4419
9,739
4359
9,606 kg 4886 4825 4760 4682 4706 4684 4620 lb 10,768 10,634 10,491 10,318 10,372 10,323 10,182 kgf 6349 5834 5350 5071 6250 6008 5542 lbf 13,994 12,858 11,791 11,177 13,773 13,241 12,214 kg 8844 8882 8917 8971 8963 8978 9019 lb 19,491 19,576 19,652 19,771 19,754 19,787 19,877
2401
7'10"
1211
2,001
1147
2,036
3022
9'10"
1.8
2.4
1.9
2.5
1.2
1.6
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
Dimensions listed are for a 910M configured with bucket, bolt-on cutting edge, optional counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 15.5 R25 (L2) XTLA tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
22
Bucket Specifications
914M Operating Specifications with Buckets
Standard Lift – General Purpose
Rated Capacity 100% (including BOCE)
Rated Capacity 110% (including BOCE)
Struck Capacity
17 Width: Bucket
Nominal Material Density, 100% Fill Factor
Nominal Material Density, 110% Fill Factor
9 Clearance: Full Lift, 45° Dump
14 Reach: Full Lift, 45° Dump
Reach: 2130 mm (7'0") Clearance, 45° Dump
Reach: Level Arm, Level Bucket
16 Dig Depth
5 Length: Overall
13 Height: Overall
19 Turning Radius: Bucket at Carry
Tipping Load – Straight, ISO 14397-1*
Tipping Load – Straight, Rigid Tire**
Tipping Load – Full Turn, ISO 14397-1*
Tipping Load – Full Turn, Rigid Tire**
Breakout Force
Operating Weight
Pin On IT
m 3 yd 3 m
3 yd
3
1.4
1.8
1.5
2.0
m 3 1.15
yd 3 1.5
1.6
2.1
1.7
2.2
1.45
1.9
1.8
2.4
1.9
2.5
1.65
2.2
1.9
2.5
2.0
2.6
1.75
2.3
1.3
1.7
1.4
1.8
1.15
1.5
1.5
2.0
1.6
2.1
1.35
1.8
1.6
2.1
1.7
2.2
1.45
1.9
1.7
2.2
1.8
2.4
1.55
2.0
mm 2401 2401 2401 2401 2401 2401 2401 2401 2401 ft/in 7'10" 7'10" 7'10" 7'10" 7'10" 7'10" 7'10" 7'10" 7'10" kg/m 3 1907 1645 1444 1359 2021 1727 1609 1504 1320 lb/yd 3 3,268 2,763 2,386 2,277 3,406 2,855 2,702 2,562 2,212 kg/m
3 lb/yd
3
1779
3,129
1549
2,806
1368
2,437
1291
2,329
1876
3,422
1619
2,892
1515
2,744
1421
2,498
1254
2,262 mm 2874 2820 2766 2741 ft/in 9'5" 9'3" 9'0" 8'11"
2838 2775 2749 2722 2664
9'3" 9'1" 9'0" 8'11" 8'8"
1.9
2.5
2.0
2.6
1.75
2.3
mm ft/in
737
2'5"
790
2'7"
838
2'8"
860
2'9" mm 1327 1352 1370 1377 ft/in 4'4" 4'5" 4'5" 4'6" mm 1996 2072 2146 2179 ft/in 6'6" 6'9" 7'0" 7'1" mm 89 in 3.5"
89
3.5"
89
3.5"
89
3.5"
799
2'7"
847
2'9"
868 891
2'10" 2'11"
925
3'0"
1370 1384 1390 1396 1394
4'5" 4'6" 4'6" 4'6" 4'6"
2063 2143 2177 2213 2281
6'9" 7'0" 7'1" 7'3" 7'5"
90
3.5"
89
3.5"
89
3.5"
90
3.5"
88
3.5" mm 6215 6291 6364 6398 6282 6362 6397 6433 6500 ft/in 20'4" 20'7" 20'10" 20'11" 20'7" 20'10" 20'11" 21'1" 21'3" mm 4562 4621 4709 4743 4591 4674 4681 4731 4811 ft/in 14'11" 15'1" 15'5" 15'6" 15'0" 15'4" 15'4" 15'6" 15'9" mm 5178 5200 5223 5233 5198 5222 5232 5244 5268 ft/in 16'11" 17'0" 17'1" 17'2" 17'0" 17'1" 17'2" 17'2" 17'3" kg 6273 6194 6119 6086 6204 6125 6091 6052 5946 lb 13,826 13,651 13,487 13,412 13,674 13,498 13,423 13,339 13,104 kg 6535 6452 6374 6339 6463 6380 6344 6304 6194 lb 14,402 14,220 14,049 13,971 14,244 14,061 13,983 13,894 13,650 kg 5338 5265 5197 5166 5254 5181 5150 5114 5017 lb 11,765 11,605 11,454 11,385 11,579 11,418 11,349 11,271 11,058 kg 5679 5602 5529 5496 5589 5512 5478 5441 5338 lb 12,516 12,345 12,185 12,112 12,319 12,147 12,074 11,991 11,764 kgf 8730 7980 7357 7100 8043 7355 7092 6835 6319 lbf 19,240 17,588 16,214 15,647 17,726 16,209 15,631 15,064 13,926 kg 8341 8380 8415 8431 8681 8720 8736 8754 8808 lb 18,383 18,469 18,547 18,582 19,132 19,219 19,254 19,294 19,413
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
Dimensions listed are for a 914M configured with bucket, bolt-on cutting edge, optional counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 15.5 R25 (L2) XTLA tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
23
Bucket Specifications
914M Operating Specifications with Buckets
Standard Lift – General Purpose
Rated Capacity 100% (including BOCE)
Rated Capacity 110% (including BOCE)
Struck Capacity
17 Width: Bucket
Nominal Material Density, 100% Fill Factor
Nominal Material Density, 110% Fill Factor
9 Clearance: Full Lift, 45° Dump
14 Reach: Full Lift, 45° Dump
Reach: 2130 mm (7'0") Clearance, 45° Dump
Reach: Level Arm, Level Bucket
16 Dig Depth
5 Length: Overall
13 Height: Overall
19 Turning Radius: Bucket at Carry
Tipping Load – Straight, ISO 14397-1*
Tipping Load – Straight, Rigid Tire**
Tipping Load – Full Turn, ISO 14397-1*
Tipping Load – Full Turn, Rigid Tire**
Breakout Force
Operating Weight
ISO 23727 ISO Flat Floor
m 3 yd 3 m
3 yd
3 m 3 yd 3 mm 2401 ft/in 7'10" kg/m 3 1972 lb/yd 3 3,324 kg/m
3 lb/yd
3
1831
3,340 mm ft/in
2800
9'2"
1.3
1.7
1.4
1.8
1.15
1.5
2401
7'10"
1686
2,787
1580
2,823
2738
8'11"
1.5
2.0
1.6
2.1
1.35
1.8
2401
7'10"
1464
2,494
1383
2,432
2684
8'9"
1.7
2.2
1.8
2.4
1.55
2.0
2401
7'10"
1288
2,158
1224
2,207
2638
8'7"
1.9
2.5
2.0
2.6
1.75
2.3
2401
7'10"
1653
2,732
1839
2,758
2788
9'1"
1.5
2.0
1.6
2.1
1.0
1.3
2401
7'10"
1541
2,588
1722
2,619
2973
9'9"
1.6
2.1
1.7
2.2
1.1
1.4
mm ft/in mm ft/in
843
2'9"
1394
4'6" mm 2120 ft/in 6'11" mm in
90
3.5"
889
2'10"
1404
4'7"
2199
7'2"
90
3.5"
933
3'0"
1415
4'7"
2269
7'5"
90
3.5"
973
3'2"
1425
4'8"
2331
7'7"
88
3.5"
950
3'1"
1494
4'10"
2197
7'2"
88
3.5"
1169
3'10"
1808
5'11"
2230
7'3"
88
3.5" mm 6340 ft/in 20'9" mm 4627 ft/in 15'2"
6419
21'0"
4695
15'4"
6489
21'3"
4765
15'7"
6549
21'5"
4845
15'10"
6416
21'0"
4703
15'5"
6449
21'1"
4725
15'6"
6520
21'4"
4811
15'9" mm 5216 ft/in 17'1"
5240
17'2"
5262
17'3"
5282
17'3"
5239
17'2"
5250
17'2"
5273
17'3" kg 6062 5984 5900 5811 5884 5855 5775 lb 13,359 13,189 13,004 12,807 12,967 12,905 12,728
955
3'1"
1422
4'7"
2302
7'6"
88
3.5" kg 6314 6234 6146 6053 6129 6099 6016 lb 13,916 13,738 13,546 13,340 13,507 13,443 13,258 kg 5128 5057 4979 4895 4959 4933 4859 lb 11,302 11,146 10,974 10,789 10,929 10,871 10,709 kg 5456 5380 5297 5208 5256 5229 5150 lb 12,023 11,857 11,674 11,478 11,584 11,523 11,351 kgf 7525 6922 6370 6032 6674 6418 5924 lbf 16,585 15,256 14,039 13,295 14,709 14,145 13,056 kg 8703 8742 8776 8830 8822 8837 8878 lb 19,182 19,266 19,342 19,462 19,444 19,477 19,568
2401
7'10"
1350
2,231
1520
2,270
2660
8'8"
1.8
2.4
1.9
2.5
1.2
1.6
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
Dimensions listed are for a 914M configured with bucket, bolt-on cutting edge, optional counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 15.5 R25 (L2) XTLA tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
24
Bucket Specifications
914M Operating Specifications with Buckets
High Lift – General Purpose
Rated Capacity 100% (including BOCE)
Rated Capacity 110% (including BOCE)
Struck Capacity
17 Width: Bucket
Nominal Material Density, 100% Fill Factor
Nominal Material Density, 110% Fill Factor
9 Clearance: Full Lift, 45° Dump
14 Reach: Full Lift, 45° Dump
Reach: 2130 mm (7'0") Clearance, 45° Dump
Reach: Level Arm, Level Bucket
16 Dig Depth
5 Length: Overall
13 Height: Overall
19 Turning Radius: Bucket at Carry
Tipping Load – Straight, ISO 14397-1*
Tipping Load – Straight, Rigid Tire**
Tipping Load – Full Turn, ISO 14397-1*
Tipping Load – Full Turn, Rigid Tire**
Breakout Force
Operating Weight
Pin On IT
m 3 yd 3 m
3 yd
3
1.4
1.8
1.5
2.0
m 3 1.15
yd 3 1.5
1.6
2.1
1.7
2.2
1.45
1.9
1.8
2.4
1.9
2.5
1.65
2.2
1.9
2.5
2.0
2.6
1.75
2.3
1.3
1.7
1.4
1.8
1.15
1.5
1.5
2.0
1.6
2.1
1.35
1.8
1.6
2.1
1.7
2.2
1.45
1.9
1.7
2.2
1.8
2.4
1.55
2.0
mm 2401 2401 2401 2401 2401 2401 2401 2401 2401 ft/in 7'10" 7'10" 7'10" 7'10" 7'10" 7'10" 7'10" 7'10" 7'10" kg/m 3 1747 1510 1327 1250 1776 1520 1417 1325 1165 lb/yd 3 2,995 2,536 2,193 2,094 2,994 2,512 2,379 2,257 1,951 kg/m
3 lb/yd
3
1631
2,868
1421
2,575
1257
2,240
1188
2,143
1650
3,008
1425
2,545
1334
2,416
1252
2,201
1106
1,995 mm 3237 3188 3139 3117 3193 3141 3118 3094 3041 ft/in 10'7" 10'5" 10'3" 10'2" 10'5" 10'3" 10'2" 10'1" 9'11"
1.9
2.5
2.0
2.6
1.75
2.3
mm ft/in
971
3'2"
1029 1085 1111
3'4" 3'6" 3'7" mm 1782 1812 1835 1845 ft/in 5'10" 5'11" 6'0" 6'0"
1021 1083 1109 1137 1176
3'4" 3'6" 3'7" 3'8" 3'10"
1829 1848 1857 1866 1871
5'11" 6'0" 6'1" 6'1" 6'1" mm 2411 2487 2560 2594 ft/in 7'10" 8'1" 8'4" 8'6"
2477 2558 2592 2628 2696
8'1" 8'4" 8'6" 8'7" 8'10" mm 272 272 272 272 274 273 273 273 272 in 10.7" 10.7" 10.7" 10.7" 10.8" 10.8" 10.8" 10.8" 10.7" mm 6758 6834 6908 6941 6825 6905 6940 6976 7043 ft/in 22'2" 22'5" 22'7" 22'9" 22'4" 22'7" 22'9" 22'10" 23'1" mm 4916 4974 5062 5096 4945 5027 5034 5084 5165 ft/in 16'1" 16'3" 16'7" 16'8" 16'2" 16'5" 16'6" 16'8" 16'11" mm 5424 5448 5471 5482 5445 5471 5482 5494 5521 ft/in 17'9" 17'10" 17'11" 17'11" 17'10" 17'11" 17'11" 18'0" 18'1" kg 5798 5734 5674 5647 5499 5436 5409 5378 5291 lb 12,779 12,638 12,505 12,445 12,120 11,980 11,920 11,852 11,660 kg 6040 5973 5910 5882 5728 5662 5634 5602 5511 lb 13,311 13,164 13,026 12,964 12,625 12,479 12,417 12,346 12,146 kg 4892 4833 4777 4752 4619 4559 4534 4506 4426 lb 10,782 10,651 10,528 10,472 10,179 10,049 9,993 9,930 9,754 kg 5205 5141 5082 5055 4914 4850 4824 4793 4708 lb 11,470 11,331 11,200 11,141 10,829 10,690 10,631 10,564 10,376 kgf 8860 8100 7468 7207 8162 7464 7198 6937 6438 lbf 19,526 17,851 16,458 15,883 17,988 16,451 15,865 15,289 14,188 kg 8867 8906 8942 8957 9055 9095 9110 9129 9182 lb 19,543 19,629 19,707 19,742 19,957 20,044 20,079 20,119 20,237
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
Dimensions listed are for a 914M configured with bucket, bolt-on cutting edge, optional counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 15.5 R25 (L2) XTLA tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
25
Bucket Specifications
914M Operating Specifications with Buckets
High Lift – General Purpose
Rated Capacity 100% (including BOCE)
Rated Capacity 110% (including BOCE)
Struck Capacity
17 Width: Bucket
Nominal Material Density, 100% Fill Factor
Nominal Material Density, 110% Fill Factor
9 Clearance: Full Lift, 45° Dump
14 Reach: Full Lift, 45° Dump
Reach: 2130 mm (7'0") Clearance, 45° Dump
Reach: Level Arm, Level Bucket
16 Dig Depth
5 Length: Overall
13 Height: Overall
19 Turning Radius: Bucket at Carry
Tipping Load – Straight, ISO 14397-1*
Tipping Load – Straight, Rigid Tire**
Tipping Load – Full Turn, ISO 14397-1*
Tipping Load – Full Turn, Rigid Tire**
Breakout Force
Operating Weight
ISO 23727 ISO Flat Floor
m 3 yd 3 m
3 yd
3 m 3 yd 3 mm 2401 ft/in 7'10" kg/m 3 1740 lb/yd 3 2,932 kg/m
3 lb/yd
3
1616
2,946 mm 3157 ft/in 10'4"
1.3
1.7
1.4
1.8
1.15
1.5
2401
7'10"
1489
2,461
1396
2,493
3105
10'2"
1.5
2.0
1.6
2.1
1.35
1.8
2401
7'10"
1295
2,206
1223
2,151
3059
10'0"
1.7
2.2
1.8
2.4
1.55
2.0
2401
7'10"
1139
1,908
1082
1,952
3018
9'10"
1.9
2.5
2.0
2.6
1.75
2.3
2401
7'10"
1457
2,408
1635
2,431
3141
10'3"
1.5
2.0
1.6
2.1
1.0
1.3
2401
7'10"
1359
2,282
1532
2,309
3327
10'10"
1.6
2.1
1.7
2.2
1.1
1.4
mm ft/in mm ft/in
1067
3'6"
1856
6'1" mm ft/in
2535
8'3" mm 273 in 10.8"
1127
3'8"
1872
6'1"
2614
8'6"
273
10.8"
1181
3'10"
1889
6'2"
2684
8'9"
273
10.8"
1227
4'0"
1905
6'2"
2746
9'0"
272
10.7"
1169
3'10"
1957
6'5"
2612
8'6"
272
10.7"
1389
4'6"
2254
7'4"
2645
8'8"
272
10.7" mm 6883 ft/in 22'6" mm 4980 ft/in 16'4"
6962
22'10"
5048
16'6"
7032
23'0"
5119
16'9"
7093
23'3"
5199
17'0"
6959
22'9"
5056
16'7"
6992
22'11"
5078
16'7"
7064
23'2"
5164
16'11" mm 5458 5484 ft/in 17'10" 17'11"
5507
18'0"
5528
18'1"
5484
17'11"
5495
18'0"
5519
18'1" kg 5392 5330 5263 5185 5232 5209 5144 lb 11,883 11,746 11,600 11,428 11,531 11,481 11,337
1205
3'11"
1899
6'2"
2717
8'10"
272
10.7" kg 5616 5552 5483 5401 5450 5426 5358 lb 12,378 12,235 12,084 11,904 12,011 11,959 11,809 kg 4524 lb 9,970
4466
9,842
4404
9,705
4330
9,542
4370
9,632
4349
9,585
4288
9,451 kg 4812 4751 4685 4606 4633 4610 4545 lb 10,606 10,470 10,325 10,151 10,210 10,160 10,018 kgf 7633 7022 6464 6127 7465 7182 6635 lbf 16,823 15,477 14,246 13,502 16,452 15,828 14,623 kg 9078 9116 9150 9205 9197 9212 9253 lb 20,006 20,091 20,167 20,286 20,269 20,302 20,392
2401
7'10"
1191
1,969
1354
2,004
3037
9'11"
1.8
2.4
1.9
2.5
1.2
1.6
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
Dimensions listed are for a 914M configured with bucket, bolt-on cutting edge, optional counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 15.5 R25 (L2) XTLA tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
26
Bucket Specifications
918M Operating Specifications with Buckets
Standard Lift – General Purpose
Rated Capacity 100% (including BOCE)
Rated Capacity 110% (including BOCE)
Struck Capacity
17 Width: Bucket
Nominal Material Density, 100% Fill Factor
Nominal Material Density, 110% Fill Factor
9 Clearance: Full Lift, 45° Dump
14 Reach: Full Lift, 45° Dump
Reach: 2130 mm (7'0") Clearance, 45° Dump
Reach: Level Arm, Level Bucket
16 Dig Depth
5 Length: Overall
13 Height: Overall
19 Turning Radius: Bucket at Carry
Tipping Load – Straight, ISO 14397-1*
Tipping Load – Straight, Rigid Tire**
Tipping Load – Full Turn, ISO 14397-1*
Tipping Load – Full Turn, Rigid Tire**
Breakout Force
Operating Weight
Pin On IT
m 3 yd 3 m
3 yd
3 m 3 yd 3 mm 2401 ft/in 7'10" kg/m 3 1937 lb/yd 3 3,252 kg/m
3 lb/yd
3
1823
3,303 mm ft/in
2937
9'7"
1.6
2.1
1.7
2.2
1.45
1.9
2401
7'10"
1701
2,812
1612
2,872
2882
9'5"
1.8
2.4
1.9
2.5
1.65
2.2
2401
7'10"
1603
2,685
1523
2,746
2857
9'4"
1.9
2.5
2.0
2.6
1.75
2.3
2401
7'10"
1954
3,230
1832
3,273
2891
9'5"
1.5
2.0
1.6
2.1
1.35
1.8
2401
7'10"
1822
3,059
1715
3,106
2865
9'4"
1.6
2.1
1.7
2.2
1.45
1.9
2401
7'10"
1704
2,901
1609
2,829
2838
9'3"
1.7
2.2
1.8
2.4
1.55
2.0
mm ft/in mm ft/in mm ft/in mm in
833
2'8"
1473
4'9"
2169
7'1"
60
2.4"
881
2'10"
1493
4'10"
2242
7'4"
60
2.4"
902
2'11"
1500
4'11"
2276
7'5"
60
2.4"
889
2'11"
1506
4'11"
2239
7'4"
61
2.4"
911
2'11"
1514
4'11"
2274
7'5"
61
2.4"
933
3'0"
1521
4'11"
2310
7'6"
61
2.4" mm 6510 ft/in 21'4" mm 4737 ft/in 15'6"
6583
21'7"
4825
15'9"
6617
21'8"
4859
15'11"
6581
21'7"
4790
15'8"
6615
21'8"
4797
15'8"
6652
21'9"
4847
15'10"
6719
22'0"
4928
16'1" mm 5368 ft/in 17'7"
5390
17'8"
5400
17'8"
5389
17'8"
5399
17'8"
5410
17'8"
5434
17'9" kg 7310 7229 7192 6939 6903 6862 6749 lb 16,111 15,932 15,851 15,293 15,213 15,123 14,874
966
3'2"
1521
4'11"
2378
7'9"
60
2.4" kg 7615 7530 7492 7228 7190 7148 7030 lb 16,783 16,596 16,512 15,930 15,847 15,753 15,493 kg 6198 6124 6091 5863 5830 5792 5690 lb 13,660 13,497 13,423 12,921 12,848 12,766 12,540 kg 6594 6515 6479 6237 6202 6162 6053 lb 14,532 14,358 14,280 13,746 13,668 13,581 13,341 kgf 9873 9111 8797 9113 8793 8478 7871 lbf 21,760 20,081 19,388 20,085 19,378 18,685 17,348 kg 9267 9302 9318 9455 9471 9489 9543 lb 20,424 20,502 20,537 20,839 20,874 20,914 21,032
2401
7'10"
1497
2,508
1422
2,566
2780
9'1"
1.9
2.5
2.0
2.6
1.75
2.3
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
Dimensions listed are for a 918M configured with bucket, bolt-on cutting edge, optional counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 17.5 R25 (L2) XTLA tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
27
Bucket Specifications
918M Operating Specifications with Buckets
Standard Lift – General Purpose
Rated Capacity 100% (including BOCE)
Rated Capacity 110% (including BOCE)
Struck Capacity
17 Width: Bucket
Nominal Material Density, 100% Fill Factor
Nominal Material Density, 110% Fill Factor
9 Clearance: Full Lift, 45° Dump
14 Reach: Full Lift, 45° Dump
Reach: 2130 mm (7'0") Clearance, 45° Dump
Reach: Level Arm, Level Bucket
16 Dig Depth
5 Length: Overall
13 Height: Overall
19 Turning Radius: Bucket at Carry
Tipping Load – Straight, ISO 14397-1*
Tipping Load – Straight, Rigid Tire**
Tipping Load – Full Turn, ISO 14397-1*
Tipping Load – Full Turn, Rigid Tire**
Breakout Force
Operating Weight mm ft/in mm ft/in mm ft/in kg lb mm ft/in mm ft/in mm ft/in mm in kg lb kgf lbf kg lb kg lb kg lb mm ft/in kg/m 3 lb/yd 3 kg/m
3 lb/yd
3 mm ft/in m 3 yd 3 m
3 yd
3 m 3 yd 3
1.5
2.0
1.6
2.1
1.35
1.8
2401
7'10"
1910
3,158
1791
3,199
2854
9'4"
931
3'0"
1528
5'0"
2295
7'6"
61
2.4"
6637
21'9"
4811
15'9"
5404
17'8"
6788
14,961
7071
15,584
5731
12,630
6096
13,436
8586
18,923
9477
20,886
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
Dimensions listed are for a 918M configured with bucket, bolt-on cutting edge, optional counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 17.5 R25 (L2) XTLA tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
6768
22'2"
4962
16'3"
5445
17'10"
6607
14,561
1013
3'3"
1553
5'1"
2428
7'11"
60
2.4"
6882
15,168
5563
12,259
5918
13,042
7513
16,559
9565
21,082
2401
7'10"
1464
2,452
1391
2,508
2754
9'0"
1.9
2.5
2.0
2.6
1.75
2.3
6491
21'3"
3939
12'11"
5437
17'10"
6540
14,413
1553
5'1"
1498
4'10"
2190
7'2"
378
14.9"
6812
15,013
5511
12,146
5842
12,874
8444
18,609
9463
20,856
2401
7'10"
1837
3,037
1722
3,065
2024
6'7"
1.5
2.0
1.6
2.1
1.0
1.3
ISO 23727
6708
22'0"
4882
16'0"
5425
17'9"
6700
14,766
974
3'2"
1541
5'0"
2366
7'9"
61
2.4"
6979
15,381
5649
12,450
6010
13,244
7930
17,478
9511
20,962
2401
7'10"
1661
2,830
1569
2,759
2800
9'2"
1.7
2.2
1.8
2.4
1.55
2.0
ISO Flat Floor
6524
21'4"
3961
12'11"
5450
17'10"
6494
14,313
1774
5'9"
1811
5'11"
2223
7'3"
378
14.9"
6765
14,910
5470
12,056
5799
12,780
8170
18,006
9478
20,889
2401
7'10"
1710
2,870
1609
2,905
2209
7'2"
1.6
2.1
1.7
2.2
1.1
1.4
6596
21'7"
4047
13'3"
5479
17'11"
6379
14,060
1556
5'1"
1427
4'8"
2295
7'6"
378
14.9"
6645
14,646
5367
11,829
5689
12,539
7369
16,242
9519
20,979
2401
7'10"
1491
2,464
1412
2,508
1896
6'2"
1.8
2.4
1.9
2.5
1.2
1.6
28
Bucket Selection Tables
General Purpose Bucket Selection – Standard Lift se
Material Type
Salt, Fine Heavy Metal Scrap, Loo Shale ry and Loose nd Gravel, Dry
Sand, D Clay a t nd Clay, Lo ose
Earth d, Wet shed
Gypsum, Cru Gr anite, B roken
Cl ay, Natural Be
Sand and Gravel, Dry
Sand, Damp 50% Rock, 50
% Earth
San d, We t
G ra vel, Pitrum
Tip Load
Full Turn*
m 3
(yd 3 )
kg/m 3
(lb/yd
3
)
1.4
(1.8)
1.6
(2.1)
1.8
(2.4)
1250
(2,106)
1325
(2,233)
1400
(2,359)
1475
(2,485)
1550
(2,612)
115%
100%
1625
(2,738)
1700
(2,865)
115%
105%
1775
(2,991)
110%
100%
1850
(3,117)
105%
1925
(3,244)
100%
2000
(3,370)
kg
(lb)
115% 110% 105%
110%
5184
(11,425)
5112
(11,266)
5044
(11,116)
1.3
(1.7)
1.5
(2.0)
1.6
(2.1)
115% 110%
115%
105%
110% 105%
100%
100%
115% 110% 105% 100%
5099
(11,238)
5027
(11,079)
4996
(11,011)
m 3
(yd 3 )
kg/m 3
(lb/yd 3 )
1.4
(1.8)
1.6
(2.1)
1.8
(2.4)
115%
1250
(2,106)
110%
1325
(2,233)
105%
1400
(2,359)
115%
100%
1475
(2,485)
110%
1550
(2,612)
1625
(2,738)
115%
100%
1700
(2,865)
110%
1775
(2,991)
105%
1850
(3,117)
100%
1925
(3,244)
2000
(3,370)
kg
(lb)
105%
5384
(11,866)
5309
(11,701)
5240
(11,548)
1.5
(2.0)
1.6
(2.1)
1.7
(2.2)
115%
115%
110% 105%
110%
115%
105%
110%
100%
105%
100%
100%
5219
(11,502)
5187
(11,432)
5152
(11,355)
m 3
(yd 3 )
kg/m 3
(lb/yd 3 )
1.6
(2.1)
1.8
(2.4)
1.9
(2.5)
1250
(2,106)
1325
(2,233)
1400
(2,359)
115%
1475
(2,485)
1550
(2,612)
115%
110%
110%
105%
105%
100%
1625
(2,738)
1700
(2,865)
115% 110%
1775
(2,991)
105%
1850
(3,117)
100%
1925
(3,244)
100%
2000
(3,370)
kg
(lb)
6257
(13,790)
6182
(13,625)
6148
(13,550)
1.6
(2.1)
1.7
(2.2)
1.9
(2.5)
115% 110% 105%
115%
100%
110%
115% 110%
105% 100%
105% 100%
5883
(12,966)
5845
(12,882)
5741
(12,653)
Material density and fill factor are key variables when choosing the appropriate size of the bucket. The long floor and open throat design of the Performance Series
Buckets along with the aggressive rack angles of the optimized linkage will demonstrate fill factors greater than 100% ISO rated. Refer to the expected fill factor % per material type at the top of the table and find a matching fill factor along the side for proper bucket sizing.
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
29
Bucket Selection Tables
General Purpose Bucket Selection – High Lift
Material Type
Fertilizer, Mix ed sum, Pulverized
, Loose m, Dry
Salt, Fine Heavy Metal Scrap Shale Sand
, Dr y a nd Loose
Gr avel, Dry
Clay, and
Bed, Dry
Clay,
Natural dstone
San Lim estone, Crushed
Clay an d Gravel, Wet ose
75% Earth en
Granite, Brok Clay, Nat Sand and Sand, Dam p
, 50% Earth
50%
Rock
San d Wet
Tip Load
Full Turn*
m
3
(yd 3 )
kg/m 3
(lb/yd 3 )
1.4
(1.8)
1.6
(2.1)
1025
(1,727)
1.8
(2.4)
1.9
(2.5)
115%
1.3
(1.7)
1.5
(2.0)
1.6
(2.1)
1.7
(2.2)
1.9
(2.5)
115%
1100
(1,854)
1175
(1,980)
1250
(2,106)
1325
(2,233)
1400
(2,359)
1475
(2,485)
115% 110%
1550
(2,612)
105%
1625
(2,738)
100%
1700
(2,865)
105% 100%
115%
110% 105%
110% 105%
115%
100%
110%
100%
115%
115%
110% 105% 100%
110% 105%
110%
115%
105%
110% 105%
100%
100%
115%
100%
110% 105%
1775
(2,991)
100% m 3
(yd 3 )
kg/m
3
(lb/yd 3 )
1.4
(1.8)
1025
(1,727)
1.6
(2.1)
1.8
(2.4)
1.9
(2.5)
115%
1100
(1,854)
115%
110%
1175
(1,980)
110%
105% 100%
1250
(2,106)
105%
1325
(2,233)
115%
100%
110%
1400
(2,359)
105%
1475
(2,485)
115%
1550
(2,612)
110%
1625
(2,738)
105%
1700
(2,865)
100%
1775
(2,991)
100%
115%
100%
110% 105% 100%
1.3
(1.7)
1.5
(2.0)
1.6
(2.1)
1.7
(2.2)
1.9
(2.5)
115%
115%
110% 105% 100%
115%
115%
110%
110%
105%
105%
100%
110% 105%
100% kg kg
(lb)
(lb)
4928
(10,861)
4868
(10,729)
4811
(10,603)
4785
(10,546)
4651
(10,250)
4590
(10,116)
4565
(10,061)
4536
4454
(9,997)
(9,816)
Material density and fill factor are key variables when choosing the appropriate size of the bucket. The long floor and open throat design of the Performance Series
Buckets along with the aggressive rack angles of the optimized linkage will demonstrate fill factors greater than 100% ISO rated. Refer to the expected fill factor % per material type at the top of the table and find a matching fill factor along the side for proper bucket sizing.
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
4823
(10,629)
4764
(10,499)
4708
(10,376)
4683
(10,321)
4734
(10,433)
4674
(10,301)
4649
(10,246)
4620
(10,182)
4539
(10,003)
30
Operating Specifications
Operating Specifications with IT Forks
7
Forks – ISO
12
2 6
10
9
1 4
8
5
11
13
3
1 Fork Tine Length
2 Load Center
3 Length: Overall
4 Reach: Ground
5 Dig Depth
6 Reach: Level Arm
7 Reach: Full Lift
8 Clearance: Level Arm
9 Clearance: Full Lift
10 Height: Overall
11 Minimum Fork Spacing
12 Carriage Width
13 Maximum Fork Spacing
mm
910M ft/in
Forks – Standard Lift IT
914M mm ft/in mm
918M ft/in mm
Forks – High Lift IT
910M 914M ft/in mm ft/in
1200 3'11" 1200 3'11" 1200 3'11" 1200 3'11" 1200 3'11"
600 1'11" 600 1'11" 600 1'11" 600 1'11" 600 1'11"
6719 22'0" 6706 22'0" 6927 22'8" 7259 23'9" 7259 23'9"
693
78
1354
2'3"
3.1"
4'5"
637
51
1324
2'1"
2"
4'4"
744
23
1421
2'5"
0.9"
4'7"
1233
256
1769
4'0"
10.1"
5'9"
1189 3'10"
235 9.2"
1739 5'8"
502
1640
1'7"
5'4"
472
1689
1'6"
5'6"
525
1698
1'8"
5'6"
722
1640
2'4"
5'4"
691
1689
2'3"
5'6"
3457 11'4" 3485 11'5" 3601 11'9" 3813 12'6" 3838 12'7"
4443 14'6" 4472 14'8" 4588 15'0" 4800 15'8" 4825 15'9"
300
1550
1526
kg
11"
5'1"
5'0"
lb
300
1550
1526
kg
11"
5'1"
5'0"
lb
300
1550
1526
kg
11"
5'1"
5'0"
lb
300
1550
1526
kg
11"
5'1"
5'0"
lb
300
1550
1526
kg
11"
5'1"
5'0"
lb
4652 10,252 4845 10,677 5471 12,058 4490 9,896 4022 8,865
3947 8,699 4121 9,081 4722 10,406 3775 8,319 3401 7,496
8155 17,974 8579 18,908 9314 20,528 8720 19,218 8633 19,027
Tipping Load – Straight, ISO 14397-1*
Tipping Load – Full Turn, ISO 14397-1*
Operating Weight
Rated Load (% of Full Turn Tip):
50% of Tip: SAE J1197**
60% of Tip: Rough Terrain EN474-3**
80% of Tip: Firm and Level EN474-3**
1973 4,349 2060 4,540 2361 5,203 1887 4,159 1701 3,748
2368 5,219 2472 5,449 2833 6,244 2265 4,991 2041 4,497
3158 6,959 3297 7,265 3777 8,325 3020 6,655 2721 5,996
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
**Full compliance to EN474-3 and SAE J1197.
Dimensions listed are for a machine configured with IT work tool, 80 kg (176 lb) operator and Michelin 17.5 R25 (L2) XTLA tires.
31
Operating Specifi cations
Operating Specifications with ISO Forks
7
Forks – ISO
12
2 6
10
9
1 4
8
5
11
13
3
1 Fork Tine Length
2 Load Center
3 Length: Overall
4 Reach: Ground
5 Dig Depth
6 Reach: Level Arm
7 Reach: Full Lift
8 Clearance: Level Arm
9 Clearance: Full Lift
10 Height: Overall
11 Minimum Fork Spacing
12 Carriage Width
13 Maximum Fork Spacing
mm
910M ft/in
Forks – Standard Lift ISO
914M mm ft/in mm
918M ft/in mm
Forks – High Lift ISO
910M 914M ft/in mm ft/in
1200 3'11" 1200 3'11" 1200 3'11" 1200 3'11" 1200 3'11"
600 1'11" 600 1'11" 600 1'11" 600 1'11" 600 1'11"
6889 22'7" 6877 22'6" 7098 23'3" 7430 24'4" 7429 24'4"
863
78
1525
2'9"
3.1"
5'0"
807
51
2'7"
2"
915
23
1494 4'10" 1592
3'0"
0.9"
5'2"
1404
256
1940
4'7"
10.1"
6'4"
1360
235
1909
4'5"
9.2"
6'3"
673
1640
2'2"
5'4"
643
1688
2'1"
5'6"
695
1698
2'3"
5'6"
892
1640
2'11"
5'4"
862
1688
2'9"
5'6"
3457 11'4" 3485 11'5" 3601 11'9" 3813 12'6" 3838 12'7"
4401 14'5" 4429 14'6" 4545 14'10" 4757 15'7" 4782 15'8"
300
1550
1526
kg
11"
5'1"
5'0"
lb
300
1550
1526
kg
11"
5'1"
5'0"
lb
300
1550
1526
kg
11"
5'1"
5'0"
lb
300
1550
1526
kg
11"
5'1"
5'0"
lb
300
1550
1526
kg
11"
5'1"
5'0"
lb
4332 9,548 4515 9,951 5114 11,271 4221 9,303 3780 8,330
3672 8,092 3837 8,455 4410 9,719 3545 7,812 3192 7,035
8158 17,980 8582 18,913 9317 20,533 8722 19,223 8636 19,033
Tipping Load – Straight, ISO 14397-1*
Tipping Load – Full Turn, ISO 14397-1*
Operating Weight
Rated Load (% of Full Turn Tip):
50% of Tip: SAE J1197**
60% of Tip: Rough Terrain EN474-3**
80% of Tip: Firm and Level EN474-3**
1836 4,046 1918 4,227 2205 4,859 1772 3,906 1596 3,517
2203 4,855 2302 5,073 2646 5,831 2127 4,687 1915 4,221
2938 6,474 3069 6,764 3528 7,775 2836 6,250 2554 5,628
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
**Full compliance to EN474-3 and SAE J1197.
Dimensions listed are for a machine configured with ISO work tool, 80 kg (176 lb) operator and Michelin 17.5 R25 (L2) XTLA tires.
32
Operating Specifications
Operating Specifications with IT Material Handling Arm
3
2
1
6
5
4
10
9
8
7
17
16
15
14
13
11
12
5
6
7
8
9
3
4
1
2
1246
1705
910M
2165
5495
6382
7270
4'1"
5'7"
7'1"
18'0"
20'11"
23'10"
3161
4160
5160
10'4"
13'7"
16'11"
1213
1673
914M
3'11"
5'5"
2133
5510
6390
7271
3129
4128
5128
6'11"
18'0"
20'11"
23'10"
10'3"
13'6"
16'9"
IT Material Handling Arm – Standard Lift
918M 910M
1336
1828
2321
5600
4'4"
5'11"
7'7"
18'4"
10
11
12
13
1784
1415
1962
2510
5'10"
4'7"
6'5"
8'2"
6469
7339
3229
4227
21'2"
24'0"
10'7"
13'10"
14
15
16
17
1649
2485
3321
4826
5'4"
8'1"
10'10"
15'10"
5227 17'1"
1832
1383
1930
2478
1637
2479
3323
4868
914M
Operating Weight
Rated Load* (50% of Full Turn Tip** SAE J1197)
Minimum Extension (7)
Middle Extension (8)
Maximum Extension (9)
8124 kg
1320 kg
1034 kg
851 kg
910M
17,905 lb
2,910 lb
2,279 lb
1,876 lb
8548 kg
1383 kg
1085 kg
894 kg
914M
18,838 lb
* *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
**Full compliance to EN474-3 and SAE J1197.
Dimensions listed are for a machine configured with IT work tool, 80 kg (176 lb) operator and Michelin 17.5 R25 (L2) XTLA tires.
3,047 lb
2,390 lb
1,969 lb
6'0"
4'6"
6'3"
8'1"
5'4"
8'1"
10'10"
15'11"
1842
1611
2198
2787
1538
2345
3154
4983
918M
6'0"
5'3"
7'2"
9'1"
5'0"
7'8"
10'4"
16'4"
9283 kg
918M
20,458 lb
1605 kg
1266 kg
1047 kg
3,536 lb
2,790 lb
2,308 lb
33
910M, 914M, 918M Standard Equipment
Standard Equipment
Standard equipment may vary. Consult your Cat dealer for details.
POWER TRAIN
• Cat C4.4 ACERT engine:
– Common rail fuel injection
– Tier 4 Final/Stage IV
• Caterpillar NOx reduction system
• Fuel: Ultra Low Sulphur Diesel @
<15 ppm EPA/<10 ppm EU
• Engine oil: CJ-4
• Electric fuel pump with 4 micron fi ltration
• S·O·S
SM
port, transmission oil
• Hydrostatic transmission, 20 km/h (12.5 mph)
• Lube for life universal joints
• Forward – Neutral – Reverse on joystick
• 100% locking differentials
• Air cleaner, radial seal, dual fi lters
• Cooling fan, on demand
• Tires 17.5-25 12PR (914M and 918M only)
• Tires 15.5-25 12PR (910M only)
• Integrated cyclone precleaner
HYDRAULICS
• Two valve, single lever joystick
• Diagnostic pressure taps
• S·O·S port, hydraulic oil
• Variable displacement piston pump
(914M and 918M only)
• Gear pump (910M only)
• Cylinder damping at kickout and end stops
(918M only)
ELECTRICAL
• 150 amp alternator
• Single 850 CCA maintenance free battery
• Roading lights
• Battery disconnect switch
FLUIDS
• Extended life coolant antifreeze, protected to –36° C (–33° F)
• Cat Advanced HYDO™ 10 hydraulic oil
LOADER END
• Parallel lift, optimized Z-bar loader
REGIONAL STANDARDS (as required)
• Back-up alarm
• Chocks, bucket tooth or edge
• Decals, roading speed
• Beacon
• Refl ectors, roading
• Camera, rearview
CHASSIS
• Front fender and rear platform
• Lockable engine enclosure
• Recovery hitch
• Vandalism protection – locked service points
OPERATOR ENVIRONMENT
• ROPS/FOPS protection
• Implement lockout
• Electro-hydraulic implement controls
• Gauges:
– Engine coolant temperature
– Hydraulic oil temperature
– Fuel level
– Speedometer
– Digital hour meter
– DEF level indicator
• Warning system indicators:
– Emission malfunction
– Air fi lter restriction
– Brake charge pressure low
– Engine malfunction
– Park brake applied
– Electrical system voltage fl ow
– Hydraulic oil fi lter bypass
– Action indicator
• Seat:
– Fabric or vinyl
– Adjustable height, backrest, armrest
• Heater/defroster
• Tinted front glass, laminated
• Adjustable steering column
• Rear window defrost
• Lockable storage box
• Internal 12V power source
• External 12V power source
34
910M, 914M, 918M Optional Equipment
Optional Equipment
Optional equipment may vary. Consult your Cat dealer for details.
POWER TRAIN
• Axle oscillation limiter
• Secondary steering
• Sound suppression, EU Prep Package
• Extreme temperature engine coolant
• High speed option 40 km/h (25 mph)
• Tire options:
– Bias ply, 15.5, 17.5-25
– Radial, 15.5, 17.5 R25
– Flexport™
HYDRAULICS
• Three valve auxiliary
• Four valve auxiliary
• High fl ow (914M and 918M only)
• Screw to Connect Hydraulic Work Tool
Connectors
• Push to Connect Hydraulic Work Tool
Connectors
LOADER END
• Integrated toolcarrier coupler
• Linkage, high lift (910M and 914M only)
• Wide (ISO) coupler
ELECTRICAL
• Engine coolant heater (120V or 240V)
• Halogen lights, front and rear
• LED work lights, front and rear
• Heavy duty battery package
• Work tool wiring harness
FLUIDS
• Biodegradable hydraulic oil
• Cold weather fuel
CHASSIS
• License plate holder
• Lockable toolbox
• Front and rear mud fl aps
• Rear fenders
OPERATOR ENVIRONMENT
• ROPS/FOPS canopy or cab
• Premium heated, air suspension seat
• Heater and air conditioner
• Feature Package: Road/Load/Road & Load
• Dependent on package selection, features included are:
– Adjustable Rimpull
– Ride Control
– Adjustable Ground Speed Control
– Implement Modulation
– Hystat Aggressiveness
– Throttle Lock and Adjust
– Automatic Loader lift and bucket kickouts adjustable in cab
• Cat radio
• Rear blind
• Security system
• Retractable seat belt 75 mm (3")
• Rearview camera and screen (standard in EU)
• Product Link
35
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com
© 2017 Caterpillar
All rights reserved
Materials and specifi cations are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
VisionLink is a trademark of Trimble Navigation Limited, registered in the United States and in other countries.
AEHQ7972 (01-2017)
(Am North, EU)
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 Effi ciently Powerful
- 6 Work Made Easy
- 8 Enjoy All Day Comfort
- 10 Customize Your Experience
- 11 Confi gured for Success
- 12 Serviceability and Customer Support
- 13 Wheel Loader Specifi cations
- 19 Bucket Specifi cations
- 29 Bucket Selection Tables
- 31 Operating Specifi cations
- 34 Standard Equipment
- 35 Optional Equipment