T-55786GD084J-LW-AHN Specs

Spec No.
Date
SPEC
TQ3C-8EAF0-E1TAB02-00
January 21, 2014
TYPE : T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
< 8.4 inch SVGA transmissive color TFT
with LED backlight and constant current circuit for LED backlight>
CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Application
Construction and outline
Mechanical specifications
Absolute maximum ratings
Electrical characteristics
Optical characteristics
Interface signals
Input timing characteristics
Lot number identification
Warranty
Precautions for use
Reliability test data
Outline drawing
㪡㪸㫅㩷㪉㪎㪃㩷㪉㪇㪈㪋
KYOCERA DISPLAY CORPORATION
This specification is subject to change without notice.
Consult Kyocera display before ordering.
Original
Issue Date
January 21, 2014
Designed by: Engineering dept.
Prepared
Checked
Confirmed by: QA dept.
Approved
Checked
Approved
Spec No.
TQ3C-8EAF0-E1TAB02-00
Part No.
Page
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
Warning
1. This Kyocera LCD module has been specifically designed for use only in
electronic devices and industrial machines in the area of audio control,
office automation, industrial control, home appliances, etc. The module
should not be used in applications where the highest level of safety and
reliability are required and module failure or malfunction of such module
results in physical harm or loss of life, as well as enormous damage or loss.
Such fields of applications include, without limitation, medical, aerospace,
communications infrastructure, atomic energy control. Kyocera expressly
disclaims any and all liability resulting in any way to the use of the module
in such applications.
2. Customer agrees to indemnify, defend and hold Kyocera harmless
from and against any and all actions, claims, damages, liabilities,
awards, costs, and expenses, including legal expenses, resulting from or
arising out of Customer's use, or sale for use, or Kyocera modules in
applications.
Caution
1. Kyocera shall have the right, which Customer hereby acknowledges, to
immediately scrap or destroy tooling for Kyocera modules for which no
Purchase Orders have been received from the Customer in a two-year period.
-
Spec No.
Part No.
TQ3C-8EAF0-E1TAB02-00
Revision record
Designed by : Engineering dept.
Date
Rev.No.
Prepared
Date
Page
Checked
Page
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
Approved
Confirmed by : QA dept.
Checked
Descriptions
Approved
-
Spec No.
Part No.
TQ3C-8EAF0-E1TAB02-00
Page
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
1
1. Application
This document defines the specification of T-55786GD084J-LW-AHN. (TCG084SVLQ*PNN-AN*33)
(RoHS Compliant)
2. Construction and outline
: Transmissive color dot matrix type TFT
: LED
: Anti-Glare treatment
: LVDS
: Timing controller, Power supply (3.3V input)
With Constant current circuit for LED Backlight(12V input)
LCD
Backlight system
Polarizer
Interface
Additional circuit
3. Mechanical specifications
Item
Specification
Unit
Outline dimensions 1)
199.5(W)×149(H)×(11.5)(D)
mm
Active area
170.4W)×127.8(H)
(21.3cm/8.4 inch(Diagonal))
mm
Dot format
800×(R,G,B)(W)×600(H)
dot
0.071(W)×0.213(H)
mm
Normally Black
-
TBD
g
Dot pitch
Base color
Mass
2)
1) Projection not included. Please refer to outline for details.
2) Due to the characteristics of the LCD material, the color varies with environmental temperature.
M407011 Spec No.
Part No.
TQ3C-8EAF0-E1TAB02-00
Page
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
2
4. Absolute maximum ratings
4-1. Electrical absolute maximum ratings
Item
Symbol
Min.
Max.
Unit
Supply voltage(+3.3V)
VDD
-0.3
4.0
V
Supply voltage(+12V)
VIN
-0.3
14.0
V
VI1
-0.3
2.8
V
VI2
-0.3
2.8
V
VI3
-0.3
VDD+0.5
V
VI4
-0.3
VIN
V
RxINi+, RxINi-
1)
Input signal CK IN+, CK INvoltagee 2) SELLVDS
BLBRT, BLEN
1) i=0,1,2,3
2) VDD must be supplied correctly within the range described in 5-1.
4-2. Environmental absolute maximum ratings
Item
Operating temperature(Ambient) 1)
Symbol
Min.
Max.
Unit
TOP(Ambient)
-30
80
°C
Operating temperature(Panel)
2)
TOP(Panel)
-30
80
Storage temperature
3)
TSTO
-30
80
°C
Operating humidity
4)
HOP
10
5)
%RH
Storage humidity
4)
HSTO
10
5)
%RH
Vibration
-
6)
6)
-
Shock
-
7)
7)
-
1) Operating temperature means a temperature which operation shall be guaranteed. Since display
performance is evaluated at 25°C, another temperature range should be confirmed.
2) Panel surface temperature (all the surface)
3) Temp. = -30°C㧨48h , Temp. = 80°C㧨168h
Store LCD at normal temperature/humidity. Keep them free from vibration and shock.
An LCD that is kept at a low or a high temperature for a long time can be defective due to
other conditions, even if the low or high temperature satisfies the standard.
(Please refer to “Precautions for Use” for details.)
3)
4)
5)
Non-condensing
Temp.҇40°C, 85%RH Max.
Temp.㧪40°C, Absolute humidity shall be less than 85%RH at 40°C.
Frequency
10㨪55 Hz
Vibration width
0.15mm
Interval
Acceleration value
(0.3㨪9 m/s2)
10-55-10 Hz
㧝minutes
2 hours in each direction X, Y, Z (6 hours total)
EIAJ ED-2531
6) Acceleration: 490 m/s2, Pulse width: 11 ms
3 times in each direction: ±X, ±Y, ±Z
EIAJ ED-2531
M407011 Spec No.
Part No.
Page
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
TQ3C-8EAF0-E1TAB02-00
3
5. Electrical characteristics
5-1. LCD
Item
Temp. = -30㨪80°C
Symbol
Condition
Min.
Typ.
Max.
Unit
VDD
-
3.0
3.3
3.6
V
Current consumption
IDD
2)
-
270
350
mA
Permissive input ripple voltage
VRP
VDD=3.3V
-
-
100
mVp-p
VIL
"Low" level
0
-
0.8
V
VIH
"High" level
2.0
-
VDD
V
IOL
VI3=0V
-10
-
10
ǴA
IOH
VI3=3.3V
-
-
400
ǴA
Supply voltage
1)
Input signal voltage
3)
Input leak current
LVDS Input voltage
4)
VL
-
0
-
1.9
V
Differential input voltage
4)
VID
-
250
350
450
mV
Differential input
threshold voltage
4) 5)
VTL
"Low" level
VCM-100
-
-
mV
VTH
"High" level
-
-
VCM+100
mV
R1
-
-
100
-
ǡ
t1
-
0.1
-
10
ms
t2
-
0
-
-
ms
t3
-
0
-
-
ms
t4
-
1.0
-
-
s
t5
-
200
-
-
ms
t6
-
200
-
-
ms
Terminator
VDD-turn-on conditions
1)
1) VDD-turn-on conditions
㪇㪅㪐㪭㪛㪛
㪇㪅㪐㪭㪛㪛
㪭㪛㪛
㪇㪅㪈㪭㪛㪛
㪇㪅㪐㪭㪛㪛
㪇㪅㪈㪭㪛㪛
㫋㪈
㫋㪋
㫋㪉
㫋㪊
㪪㫀㪾㫅㪸㫃㩷㩷㪊㪀㩷㪋㪀
㫋㪌
㫋㪍
㪙㪣㪜㪥
M407011 Spec No.
Part No.
TQ3C-8EAF0-E1TAB02-00
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
2) Display pattern:
VDD = 3.3V, Temp. = 25°C
123 456 ࡮࡮࡮࡮࡮࡮࡮࡮࡮࡮࡮࡮࡮࡮࡮࡮2398 2399 2400(dot)
1 ‫غغغغغغغغغغغغغغغغغغغغغغغ‬
2 ‫غغغغغغغغغغغغغغغغغغغغغغغ‬
3 ‫غغغغغغغغغغغغغغغغغغغغغغغ‬
: ‫غغغغغغغغغغغغغغغغغغغغغغغ‬
: ‫غغغغغغغغغغغغغغغغغغغغغغغ‬
: ‫غغغغغغغغغغغغغغغغغغغغغغغ‬
599 ‫غغغغغغغغغغغغغغغغغغغغغغغ‬
600 ‫غغغغغغغغغغغغغغغغغغغغغغغ‬
(dot)
3) Input signal : SELLVDS
4) Input signal : RxIN3+, RxIN3-, RxIN2+, RxIN2-, RxIN1+, RxIN1-, RxIN0+, RxIN0 CK IN+, CK IN-
㪭㪠㪛
㪭㪣
㪭㪚㪤
㪇㪭
5) VCM : LVDS Common mode voltage (VCM=1.25V)
M407011 Page
4
Spec No.
Part No.
TQ3C-8EAF0-E1TAB02-00
Page
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
5
5-2. Constant current circuit for LED Backlight
Temp. = -30㨪80°C
Item
Supply voltage
1)
Current consumption
Permissive input ripple voltage
BLBRT Input signal voltage
BLBRT Input pull-down resistance
BLEN Input signal voltage
BLEN Input pull-down resistance
PWM Frequency
3)
PWM Duty ratio
Operating life time
Symbol
Condition
Min.
Typ.
Max.
Unit
VIN
-
10.8
12.0
13.2
V
IIN
2)
-
(770)
(1000)
mA
VRP_BL
VIN=12.0V
-
-
100
mVp-p
VIL_BLBRT
"Low" level
0
-
0.8
V
VIH_BLBRT
"High" level
2.3
-
VIN
V
RIN_BLBRT
-
100
300
500
kǡ
VIL_BLEN
"Low" level
0
-
0.8
V
VIH_BLEN
"High" level
2.3
-
VIN
V
RIN_BLEN
-
100
300
500
kǡ
fPWM
-
200
-
10k
Hz
fPWM=200Hz
1
-
100
%
fPWM=2kHz
10
-
100
%
fPWM=10kHz
50
-
100
%
Temp.=25°C
-
(70,000)
-
h
DPWM
4), 5)
T
‫ޣ‬LED Circuit ‫ޤ‬
6Chips
C1
A1
C2
A2
C3
A3
C4
A4
M407011 Spec No.
Part No.
TQ3C-8EAF0-E1TAB02-00
1)
Page
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
VIN-turn-on conditions
㪇㪅㪐㪭㪠㪥
㪭㪠㪥
㪇㪅㪈㪭㪠㪥
㪇㫄㫊
㩿㫄㫀㫅㪀
㪙㪣㪜㪥
㪇㫄㫊
㩿㫄㫀㫅㪀
㪇㫄㫊
㩿㫄㫀㫅㪀
㪧㪮㪤 㫊㫀㪾㫅㪸㫃
㪇㫄㫊
㩿㫄㫀㫅㪀
㪙㪣㪙㪩㪫
㩷㩷㩷㩷㩷㩷㩷㩷㪘㪽㫋㪼㫉㩷㫊㫀㪾㫅㪸㫃㩷㫀㫊㩷㫀㫅㫇㫌㫋㪃㩷㫀㫋㩷㫎㫀㫃㫃㩷㫋㪸㫂㪼㩷㪉㪇㪇㫄㫊㩿㪤㫀㫅㪅㪀㩷㫋㫆㩷㫊㫋㪸㪹㫀㫃㫀㫑㪼㩷
㩷㩷㩷㩷㩷㩷㩷㩷㫇㫆㫎㪼㫉㩷㫆㪽㩷㪹㪸㪺㫂㫃㫀㪾㪿㫋㪅㩷
㩷㩷㩷㩷㩷㩷㩷㩷㪤㪼㪸㫅㫎㪿㫀㫃㪼㪃㩷㫋㫆㫅㩷㫆㪽㩷㪙㪣㪙㪩㪫㩷㫊㪿㫆㫌㫃㪻㩷㪹㪼㩷㫄㫆㫉㪼㩷㫋㪿㪸㫅㩷㪉㪇㪇㱘㫊㪅
㪉㪇㪇㫄㫊
㩿㫄㫀㫅㪀
㪦㪥
㪣㪜㪛
㪙㪸㪺㫂㫃㫀㪾㪿㫋
㪦㪝㪝
㪦㪝㪝
VIN = 12V, Temp. = 25͠㧘DPWM = 100%
2)
3) PWM Timing Diagram
tON㧘tOFF ҈ 50Ǵs.
In case of lower frequency, the deterioration of the display quality, flicker etc., may occur.
4) When brightness decrease 50% of minimum brightness.
㩷 㩷 㩷 The average life of a LED will decrease when the LCD is operating at higher temperatures.
5) Life time is estimated data. (Condition : IF=100mA, Ta=25͠ in chamber).
M407011 6
Spec No.
Part No.
TQ3C-8EAF0-E1TAB02-00
Page
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
7
6. Optical characteristics
Item
Measuring spot =Ǿ6.0mm, Temp. = 25°C
Symbol
Condition
Min.
Typ.
Max.
Unit
Rise
r
ǰ=Ǿ=0°
-
18
-
ms
Down
d
ǰ=Ǿ=0°
-
12
-
ms
ǰUPPER
-
85
-
ǰLOWER
-
85
-
-
85
-
-
85
-
Response time
Viewing angle range
deg.
CR҈10
ǾLEFT
deg.
㱢RIGHT
Contrast ratio
Brightness
CR
ǰ=Ǿ=0°
(500)
(750)
-
-
L
IF=100mA/Line
-
(1200)
-
cd/m2
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
y
TBD
TBD
TBD
x
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
x
Red
ǰ=Ǿ=0°
y
x
Green
Chromaticity
coordinates
ǰ=Ǿ=0°
Blue
ǰ=Ǿ=0°
y
x
White
y
ǰ=Ǿ=0°
6-1. Definition of contrast ratio
CR(Contrast ratio) 㧩
Brightness with all pixels "White"
Brightness with all pixels "Black"
6-2. Definition of response time
M407011 Spec No.
Part No.
TQ3C-8EAF0-E1TAB02-00
Page
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
6-3. Definition of viewing angle
Ǿ q
ǰ722'4
[
ǰq
[
ǰ.19'4
Ǿ.'(6
Z
Z
Ǿ4+)*6
Z
Z
[
[
ǾFKTGEVKQP
ǰFKTGEVKQP
6-4. Brightness measuring points
200㬍㪊
150
600㬍㪊
(dot)
4
1
3
300
450
400㬍㪊
2
5
(dot)
1) Rating is defined as the white brightness at center of display screen(3).
2) 5 minutes after LED is turned on. (Ambient Temp.=25͠)
M407011 8
Spec No.
Part No.
TQ3C-8EAF0-E1TAB02-00
Page
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
7. Interface signals
7-1. Interface signals
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Symbol
GND
SELLVDS
GND
GND
RxIN3+
RxIN3GND
CK IN+
CK INGND
RxIN2+
RxIN2GND
RxIN1+
RxIN1GND
RxIN0+
RxIN0GND
GND
VDD
VDD
GND
BLBRT
BLEN
GND
VIN
VIN
GND
GND
LCD connector
Matching connector
Description
GND
Mode select signal(LVDS Data mapping)
GND
GND
LVDS receiver signal CH3(+)
LVDS receiver signal CH3(-)
GND
LVDS receiver signal CK(+)
LVDS receiver signal CK(-)
GND
LVDS receiver signal CH2(+)
LVDS receiver signal CH2(-)
GND
LVDS receiver signal CH1(+)
LVDS receiver signal CH1(-)
GND
LVDS receiver signal CH0(+)
LVDS receiver signal CH0(-)
GND
GND
+3.3V power supply
+3.3V power supply
GND
PWM signal(Brightness adjustment)
ON/OFF terminal voltage
GND
+12V power supply
+12V power supply
GND
GND
㧦
㧦
㧦
㧦
㧦
FI-X30SSLA-HF
FI-X30HL
FI-X30HL-T
FI-X30C2L-NPB
FI-X30C2L-T-NPB
(JAE)
(JAE)
(JAE)
(JAE)
(JAE)
LVDS receiver
㧦 Embedded in ASIC
Matching LVDS transmitter 㧦 THC63LVDM83R(THine Electronics) or compatible
M407011 Note
LVDS
LVDS
LVDS
LVDS
LVDS
LVDS
LVDS
LVDS
LVDS
LVDS
9
Spec No.
Part No.
TQ3C-8EAF0-E1TAB02-00
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
7-2. Data mapping(6bit RGB input)
1) Location of SELLVDS (THC63LVDM83R(THine Electronics) or compatible)
Transmitter
2Pin SELLVDS
Pin No.
Data
= L(GND) or OPEN
= H(3.3V)
㧙
R0(LSB)
51
TA0
TA1
㧙
R1
52
TA2
㧙
R2
54
TA3
㧙
R3
55
TA4
㧙
R4
56
TA5
㧙
R5(MSB)
3
TA6
㧙
G0(LSB)
4
㧙
G1
6
TB0
TB1
㧙
G2
7
TB2
㧙
G3
11
TB3
㧙
G4
12
TB4
㧙
14
G5(MSB)
TB5
㧙
B0(LSB)
15
TB6
㧙
B1
19
㧙
B2
20
TC0
TC1
㧙
B3
22
TC2
㧙
B4
23
TC3
㧙
24
B5(MSB)
TC4
㧙
(HS)
27
TC5
㧙
(VS)
28
TC6
㧙
DE
30
㧙
GND
50
TD0
TD1
㧙
GND
2
TD2
GND
㧙
8
TD3
GND
㧙
10
TD4
GND
㧙
16
TD5
GND
㧙
18
TD6
㧙
GND
25
SELLVDS=H(3.3V)
1 CYCLE
R1
G0
R5
R4
R3
R2
R1
R0
G0
G1
B1
B0
G5
G4
G3
G2
G1
B1
B2
DE
(VS)
(HS)
B5
B4
B3
B2
DE
DE㧦DATA ENABLE
HS㧦HSYNC
VS㧦VSYNC
M407011 Page
10
Spec No.
TQ3C-8EAF0-E1TAB02-00
Part No.
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
Page
11
2) Block Diagram
SELLVDS=H(3.3V)
When using ̌6-bit Transmitter̍, please connect the unused channel of the control IC receiver
as described in the diagram below.
M407011 Spec No.
Part No.
TQ3C-8EAF0-E1TAB02-00
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
7-3. Data mapping(8bit RGB input)
1) Location of SELLVDS (THC63LVDM83R(THine Electronics) or compatible)
Transmitter
2Pin SELLVDS
Pin No.
Data
= L(GND) or OPEN
= H(3.3V)
R0(LSB)
R2
51
TA0
TA1
R1
R3
52
TA2
R2
R4
54
TA3
R3
R5
55
TA4
R4
R6
56
TA5
R5
3
R7(MSB)
TA6
G0(LSB)
G2
4
G1
G3
6
TB0
TB1
G2
G4
7
TB2
G3
G5
11
TB3
G4
G6
12
TB4
G5
14
G7(MSB)
TB5
B0(LSB)
B2
15
TB6
B1
B3
19
B2
B4
20
TC0
TC1
B3
B5
22
TC2
B4
B6
23
TC3
B5
24
B7(MSB)
TC4
(HS)
(HS)
27
TC5
(VS)
(VS)
28
TC6
DE
DE
30
R6
R0(LSB)
50
TD0
TD1
R7(MSB)
R1
2
TD2
G6
G0(LSB)
8
TD3
G7(MSB)
G1
10
TD4
B6
B0(LSB)
16
TD5
B7(MSB)
B1
18
TD6
(NA)
25
(NA)
SELLVDS=L(GND) or OPEN
1 CYCLE
R1
R0
G0
R5
R4
R3
R2
R1
R0
G0
G2
G1
B1
B0
G5
G4
G3
G2
G1
B1
B3
B2
DE
(VS)
(HS)
B5
B4
B3
B2
DE
㪩㪎
㪩㪍
㪥㪘
㪙㪎
㪙㪍
㪞㪎
㪞㪍
㪩㪎
㪩㪍
㪥㪘
DE㧦DATA ENABLE
HS㧦HSYNC
VS㧦VSYNC
M407011 Page
12
Spec No.
Part No.
TQ3C-8EAF0-E1TAB02-00
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
SELLVDS=H(3.3V)
1 CYCLE
R3
R2
G2
R7
R6
R5
R4
R3
R2
G2
G4
G3
B3
B2
G7
G6
G5
G4
G3
B3
B5
B4
DE
(VS)
(HS)
B7
B6
B5
B4
DE
㪩㪈
㪩㪇
㪥㪘
㪙㪈
㪙㪇
㪞㪈
㪞㪇
㪩㪈
㪩㪇
㪥㪘
DE㧦DATA ENABLE
HS㧦HSYNC
VS㧦VSYNC
2) Block Diagram
SELLVDS=L(GND) or OPEN
M407011 Page
13
Spec No.
Part No.
TQ3C-8EAF0-E1TAB02-00
Page
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
14
SELLVDS=H(3.3V)
8. Input timing characteristics
8-1. Timing characteristics
Item
Clock (CK)
Enable signal
(DE)
Refresh rate
Frequency
Symbol
Min.
Typ.
Max.
Unit
1/Tc
30
40
48
MHz
860
1056
1395
Tc
24.0
26.4
-
Ǵs
Horizontal Period
Th
Horizontal display period
Thd
Vertical Period
Tv
Vertical display period
Tvd
fv
800
610
628
1)
Tc
1024
600
50
Note
60
Th
Th
70
Hz
1) Please set a clock frequency, a vertical dormant period, and the horizontal dormant period
so that the Horizontal Period should not reach less than Min. value.
2) If the refresh rate reach less than Min. value, the deterioration of the display quality, flicker etc.,
may occur.(fv=1/Tv)
M407011 2)
Spec No.
Part No.
TQ3C-8EAF0-E1TAB02-00
Page
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
Vertical Timing Diagram
Data
DH1
DH2
DH3
DH598
DH599
DH600
DH1
D798
D799
D800
D1
DE
Tvd
Tv
Horizontal Timing Diagram
Tc
㪚㪢
Data
D1
D2
D3
DE
Thd
Th
8-2. Input Data Signals and Display position on the screen
䌄䋱䋬䌄䌈䋱
䌄䋱䋬䌄䌈䋲
䌄䋲䋬䌄䌈䋱
䌄䋲䋬䌄䌈䋲
䌄䋳䋬䌄䌈䋱
䌄䋳䋬䌄䌈䋲
䌄䋸䋰䋰䋬䌄䌈䋱
㪩
㪞
㪙
䌄䋱䋬䌄䌈䋶䋰䋰 䌄䋲䋬䌄䌈䋶䋰䋰 䌄䋳䋬䌄䌈䋶䋰䋰
M407011 15
Spec No.
Part No.
TQ3C-8EAF0-E1TAB02-00
Page
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
16
9. Lot number identification
The lot number shall be indicated on the back of the backlight case of each LCD.
TCG084SVLQ*PNN-AN*33
-
- - 12
3
MADE IN
4
5
No1. - No5. above indicate
1. Year code
2. Month code
3. Date
4. Version Number
5. Country of origin (Japan or China)
Year
Code
2014
4
2015
5
2016
6
2017
7
2018
8
2019
9
Month
Code
Jan.
1
Feb.
2
Mar.
3
Apr.
4
May
5
Jun.
6
Month
Code
Jul.
7
Aug.
8
Sep.
9
Oct.
X
Nov.
Y
Dec.
Z
10. Warranty
10-1. Incoming inspection
Please inspect the LCD within one month after your receipt.
10-2. Production warranty
Kyocera display warrants its LCD’s for a period of 12 months from the ship date. Kyocera display
shall, by mutual agreement, replace or re-work defective LCD’s that are shown to be Kyocera display’s
responsibility.
M407011 Spec No.
TQ3C-8EAF0-E1TAB02-00
Part No.
Page
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
17
11. Precautions for use
11-1. Installation of the LCD
1) Please ground either of the mounting (screw) holes of LCD, in order to stabilize brightness and
display quality.
2) A transparent protection plate shall be added to protect the LCD and its polarizer.
3) The LCD shall be installed so that there is no pressure on the LSI chips.
4) Since this product is wide viewing product, occurrence level of in-plane unevenness by the external
stress is different compared to current normal viewing product. So there is a possibility that
in-plane unevenness will be occurred by over twist, strain giving by attaching to LCD, and over
pressure to touch panel. Please be careful of stress when designing the housing.
5) A transparent protection sheet is attached to the polarizer. Please remove the protection film
slowly before use, paying attention to static electricity.
11-2. Static electricity
1) Since CMOS ICs are mounted directly onto the LCD glass, protection from static electricity is
required.
2) Workers should use body grounding. Operator should wear ground straps.
11-3. LCD operation
1) The LCD shall be operated within the limits specified. Operation at values outside of these limits
may shorten life, and/or harm display images.
2) Please select the best display pattern based on your evaluation because flicker, lines or
nonuniformity or unevenness can be visible depending on display patterns.
11-4. Storage
1) The LCD shall be stored within the temperature and humidity limits specified.
Store in a dark area, and protect the LCD from direct sunlight or fluorescent light.
2) Always store the LCD so that it is free from external pressure onto it.
11-5. Usage
1) DO NOT store in a high humidity environment for extended periods. Polarizer degradation bubbles,
and/or peeling off of the polarizer may result.
2) The front polarizer is easily scratched or damaged. Prevent touching it with any hard material, and
from being pushed or rubbed.
3) The LCD screen may be cleaned by wiping the screen surface with a soft cloth or cotton pad using a
little Ethanol.
4) Water may cause damage or discoloration of the polarizer. Clean condensation or moisture from
any source immediately.
5) Always keep the LCD free from condensation during testing. Condensation may permanently spot
or stain the polarizer.
6) Do not disassemble LCD because it will result in damage.
7) This Kyocera display LCD has been specifically designed for use in general electronic devices, but
not for use in a special environment such as usage in an active gas. Hence, when the LCD is
supposed to be used in a special environment, evaluate the LCD thoroughly beforehand and do not
expose the LCD to chemicals such as an active gas.
8) Please do not use solid-base image pattern for long hours because a temporary afterimage may
appear. We recommend using screen saver etc. in cases where a solid-base image pattern must be
used.
9) Liquid crystal may leak when the LCD is broken. Be careful not to let the fluid go into your eyes
and mouth. In the case the fluid touches your body; rinse it off right away with water and soap.
M407011 Spec No.
Part No.
TQ3C-8EAF0-E1TAB02-00
Page
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
12. Reliability test data
Test item
Test condition
Test time
High temp.
atmosphere
80°C
(240h)
Low temp.
atmosphere
-30°C
(240h)
High temp.
humidity
atmosphere
40°C 90% RH
(240h)
Temp. cycle
-30°C 0.5h
R.T. 0.5h
80°C 0.5h
(10cycles)
High temp.
operation
80°C
(500h)
1)
2)
3)
4)
Judgement
Display function
Display quality
Current consumption
Display function
Display quality
Current consumption
Display function
Display quality
Current consumption
Display function
Display quality
Current consumption
Display function
Display quality
Current consumption
: No defect
: No defect
: No defect
: No defect
: No defect
: No defect
: No defect
: No defect
: No defect
: No defect
: No defect
: No defect
: No defect
: No defect
: No defect
Each test item uses a test LCD only once. The tested LCD is not used in any other tests.
The LCD is tested in circumstances in which there is no condensation.
The reliability test is not an out-going inspection.
The result of the reliability test is for your reference purpose only.
The reliability test is conducted only to examine the LCD's capability.
M407011 18
Spec No.
Date
TQ3C-8EAF0-E2TAB02-00
January 21, 2014
KYOCERA INSPECTION STANDARD
TYPE : T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
KYOCERA DISPLAY CORPORATION
Original
Issue Date
Designed by : Engineering dept.
Prepared
Checked
Approved
Confirmed by : QA dept.
Checked
Approved
January 21, 2014
Spec No.
Part No.
TQ3C-8EAF0-E2TAB02-00
Date
Rev.No.
Date
Revision record
Designed by : Engineering dept.
Prepared
Page
Checked
Approved
Page
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
Confirmed by : QA dept.
Checked
Descriptions
Approved
-
Spec No.
Part No.
TQ3C-8EAF0-E2TAB02-00
Page
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
1
Visuals specification
1) Note
Note
General
1.
Customer identified anomalies not defined within this inspection standard shall be
reviewed by Kyocera display, and an additional standard shall be determined by mutual
consent.
2.
This inspection standard about the image quality shall be applied to any defect within
the active area and shall not be applicable to outside of the area.
3.
Inspection conditions
Luminance
: 300 ~ 500 Lux min.
Inspection distance
: 350 mm.
Temperature
: Approximate 25͠
Direction : Normal to the LCD panel r 10qhorizontal and
vertical
Definition of
Dot defect
Bright dot defect
inspection item
The dot is constantly “on” when power applied to the
LCD, even when all “Black” data sent to the screen.
Inspection tool: 5% Transparency neutral density filter.
Count dot: If the dot is visible through the filter.
Don’t count dot: If the dot is not visible through the
filter.
䌒 䌇 䌂 䌒 䌇 䌂 䌒 䌇 䌂
䌒 䌇 䌂 䌒 䌇 䌂 䌒 䌇 䌂
dot defect
䌒 䌇 䌂 䌒 䌇 䌂 䌒 䌇 䌂
Black dot defect
The dot is constantly “off” when power applied to the
LCD, even when all “White” data sent to the screen.
Adjacent dot
Adjacent dot defect is defined as two or more bright dot
defects or black dot defects.
䌒 䌇 䌂 䌒 䌇 䌂 䌒 䌇 䌂
䌒 䌇 䌂 䌒 䌇 䌂 䌒 䌇 䌂
䌒 䌇 䌂 䌒 䌇 䌂 䌒 䌇 䌂
dot defect
External
Bubble, Scratch,
Visible operating (all pixels “Black” or “White”) and non
inspection
Foreign particle
operating.
(Polarizer, Cell,
Backlight)
Appearance
Does not satisfy the value at the spec.
inspection
Definition
Definition of circle size
Definition of linear size
of size
㨐㧩(㨍㧗㨎)/2
Spec No.
Part No.
TQ3C-8EAF0-E2TAB02-00
Page
T-55786GD084J-LW-AHN
(TCG084SVLQ*PNN-AN*33)
2
2) Standard
Defect Type
Visual defect
Scratch
Limit
0.01 mm < W ҇ 0.05 mm
N ҇ 4
L ҇ 10 mm
0.01 mm < W
N=0
10mm < L
0.05 mm < W
N=0
0.2 mm < Ǟ ҇ 0.4 mm
N ҇ 4
0.4 mm < Ǟ
N=0
Black spot
0.2 mm < Ǟ ҇ 0.4 mm
N ҇ 5
Bubble
0.4 mm < Ǟ
N=0
Lint
L ҇ 3 mm
N ҇ 4
Dent
W ҇ 0.1 mm
3 mm ҇ L
N=0
W ҇ 0.1 mm
0.1 mm < W
Electrical defect
Bright dot
N ҇ 5
Dark dot
N ҇ 5
Total dot
N ҇ 8
According to Black spot
Two adjacent dot
Bright dot
҇ 2 pairs
Dark dot
҇ 2 pairs
Three or more
Not allowed
adjacent dot
Line defect
Not allowed
Download PDF
Similar pages