HIGH-TEMP
High-temp. handheld probes
15 mm
Applications
For measurements in air ducts, dryers, climatic chambers, etc. up to
200°C
Use
Handheld instruments and data loggers
Highlights
•
•
•
•
•
Measures relative humidity, temperature and dew/frost point
Saves up to 2,000 measurement pairs (optional, requires HW4 software)
UART interface and freely scalable analog signals 0…1 V
Standard scaling 0…1 V = 0…100 %rh / -40…60 °C
Probe with 'Standard' adjustment profile, factory adjustment certificate
Order code
Type
HC2-HK25
HC2-HK40
Handheld probe ~2m TPU cable
Range of appl.
0…100 %rh / -100…150 °C
0…100 %rh / -100…200 °C
Adjustment
At 23 °C and 10, 35, 80 %rh
Accuracy
±0.8 %rh / ±0.1 K / Response time τ 63: without filter <10 s
Probe length
250 mm
Handle color
Anthracite
Filter carrier
NSP-ME (order filter separately)
Weight
Approx. 210 g
400 mm
Approx. 240 g
SUPERTRON - Temperature, Humidity, Moisture Measurement & Calibration
HANDHELD PROBE
HC2-Probe
HUMIDITY PROBE
Detailed specifications of HC2
Power supply / Connections
Supply voltage (VDD)
HC2-IC, HC2-IM and HC2-IE: 3.3 V ± 0.1 V, other types: 3.2 …5.0 VDC ±0%
Nominal current consumption
<4,0 mA at VDD = 3,3 VDC
Humidity measurement
Sensor
ROTRONIC Hygromer® IN-1 (exception HC2-S3, Hygromer® V-1)
Measurement range
0…100 %rh
Accuracy at 23 °C
±0.8 %rh
Repeatability
0.3 %rh
Long term stability
<1 %rh/year
Temperature measurement
Sensor
Pt100 1/3 Class B
Measurement range
-100…200 °C
Accuracy at 23 °C
±0.1 K
Repeatability
0.05 °C
Long term stability
<1 °C/year
Response time
4 sec for 63 % of the change from 23 to 80 °C (1 m/sec air fl ow at sensor)
Calculated parameters
Psychrometric calculations
Dew point or frost point
Start-up time / Refresh rate
<2 s / <0.9 s (main clock 5 MHz)
Configurable analogue outputs
Output 1 standard
Relative humidity; 0...100 %rh = 0...1 V
Output 2 standard
Temperature -40…60 °C = 0...1 V
Scale limits
-999.99…+9999.99 units, user configurable with HW4 software
Digital interface (service connector)
Type of interface
UART (universal asynchronous receiver transmitter)
Maximum length service cable
5 m (16.4 ft) without signal amplifier
General specifications
Housing material
Polycarbonate / ABS
Connector material
Anodized anticorodal aluminum
Filter material
Depending on probe / filter type
Protection
IP 65
CE/EMC compatibility
CE-compliant, 2007/108/EC
EN 61000-6-1: 2001, EN 61000-6-2: 2005
EN 61000-6-3: 2005, EN 61000-6-4: 2001 + A11
Solder
Lead-free (RoHS-compliant)
FDA/GAMP compatibility
FDA 21 CFR Part 11 / GAMP 4
Electronics operating range
-50…100 °C / 0…100 %rh, non-condensing
Max. air velocity at probe
40 m/s (7,870 ft/min)
SUPERTRON - Temperature, Humidity, Moisture Measurement & Calibration
Download PDF
Similar pages