DA7427B2 Assembly Manual

INSTRUCTION MANUAL
Model No:
DA7427B2 (BLACK)
UPC CODE:
2-in-1 Convertible Crib
0-65857-17265-2
NOTE:
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
Lot number:
(TAKEN FROM CARTON)
_____________________________________
Date of purchase:
_______ / _______ / _______
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our
customer service department. We will replace the
part FREE of charge.
NEED
HELP!
Tel #: 1-800-295-1980
CALL
US
FOR ASSISTANCE
E-Mail: das@dorel.com
1-800-295-1980
Fax #: 514-353-7819
DO NOT RETURN PRODUC
E-MAIL:DAS@DOREL.COM
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model number, color and a detailed
description of the part.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada, H1G 3L1
E-MAIL: das@dorel.com
WARNING
* Failure to follow these warnings and assembly instructions could result in serious injury or death.
* Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE USE.
* Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts or sharp
edges before assembly and frequently during use. Securely tighten loose bolts and other fasteners. DO NOT
use crib if any parts are missing, damaged or broken. Contact a customer service representative at 1-800-2951980 for replacement parts and instructional literature if needed. DO NOT substitute parts.
* Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under
an infant.
* Stop using the crib when child begins to climb out or reaches the height of 35 inches (89 cm).
* To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless
otherwise advised by your physician.
* DO NOT place crib near window where cords from blinds or drapes may strangle a child.
* Strings can cause strangulation! DO NOT place items with a string around a child's neck, such as hood strings
or pacifier cords. DO NOT suspend strings over a crib or attach strings to toys.
* To help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing on loose
fasteners.
* If refinishing, use a non-toxic finish specified for children's products.
* When child is able to pull to standing position, set mattress to lowest position and remove bumper pads, large
toys and other objects that could serve as steps for climbing out.
* Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
* Replace teething rail if damaged or loose (if teething rail is provided for this model).
* CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY 51-5/8 INCHES
(69CM BY 131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES (15CM).
* Infants can suffocate in gaps between crib sides and a mattress that is too small.
* Follow warnings on all products in a crib.
* INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT. Openings in and between bed parts can
entrap head and neck of a small child.
* NEVER use bed with children under 15 months or over 50 lbs.
* ALWAYS follow assembly instructions.
* STRANGULATION HAZARD. NEVER place bed near windows where cords from blinds or drapes may
strangle a child.
* NEVER suspend strings over a bed.
* NEVER place items with a string, cord, or ribbon around a child's neck, such as hood strings or pacifier cords.
These items can catch on bed parts.
* CAUTION
ENTRAPMENT HAZARD. To avoid dangerous gaps, any mattress used on this bed shall be a full-size crib
mattress at least 51-5/8 inches (1310 mm) in length, 27-1/4 inches (690 mm) in width, and a max thickness of
6 inches (150 mm).
NOTES
* Ensure all parts and components are present before beginning assembly.
* Assemble on a soft, smooth surface to prevent damage to product finish.
* DO NOT use power tools.
* CAUTION: Adult assembly required.
* Assembly will require two people.
* Estimated assembly time: 60 minutes.
CARE AND CLEANING
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage finish.
Excessive exposure to sunlight and extreme changes in temperature and moisture can damage
wood furniture.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
Dorel warrants its product to be free from defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 1 year from the date of original purchase. This
warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair or
replacement of defective furniture components and no assembly labor is included. This warranty
does not apply to any product which has been improperly assembled, subjected to misuse or abuse
or which has been altered or repaired in any way. This warranty gives you specific legal rights and
you may also have other rights which vary from State to State.
WARNING: Should this product become damaged,
and/or components are broken or missing, DO NOT USE.
2-in-1 Convertible Crib
DA7427B2
HARDWARE LIST
1
2
Ø1/4" X 13mm X 35mm
Ø1/4" X 13mm X 55mm
BOLT
4 PCS
BOLT
10 PCS
3
4
Ø1/4" X 13mm X 75mm
Ø1/4" X 13mm X 60mm
BOLT
8 PCS
BOLT
2 PCS
5
6
Ø8 X 30mm
Ø1/4" X 13mm X Ø10mm
WOOD DOWEL
8 PCS
BARREL NUT
16 PCS
7
8
Ø1/4" X 13mm X 15mm
ALLEN KEY
1 PC
MATTRESS SUPPORT BOLT
16 PCS
2-in-1 Convertible Crib
DA7427B2
PARTS LIST
A
B
FRONT POST
2 PCS
D
C
BACK POST
2 PCS
E
SIDE PANEL
2 PCS
G
F
TOP RAIL
2 PCS
H
FRONT RAIL
1 PC
BACK PANEL
1 PC
MATTRESS SUPPORT
1 PC
FRONT PANEL
1 PC
2-in-1 Convertible Crib
DA7427B2
CRIB ASSEMBLY INSTRUCTION
NOTE: When inserting bolts, turn clockwise until tight. Then loosen
1/2 - 3/4 of a turn. After crib is completely assembled, return to each
bolt and tighten. Use wax or soap on all bolts to facilitate assembly.
2-in-1 Convertible Crib
DA7427B2
STEP 1
Attach top rails (E) to the side panels (D) as shown below.
NOTE:
The side panels (D) and top
rails (E) are labeled
"INSIDE". To ensure proper
assembly, the side panel (D)
and top rails (E) must be
assembled facing the same
side.
2-in-1 Convertible Crib
DA7427B2
STEP 2
Insert wood dowels (5) into the top rail (E).
Insert barrel nuts (6) into the side panel (D).
Attach left front post (A1) and left back post (B1) to the side panel (D) and top rail (E) with
bolts (1 & 2) as shown.
Use Allen key (7) to tighten the bolts.
Repeat this step to assemble the other side panel using right front post (A2) and right back
post (B2).
2-in-1 Convertible Crib
DA7427B2
STEP 3
Insert barrel nuts (6) into the back panel (C).
Attach back panel (C) to the left and right back posts (B1 & B2) with wood dowel (5) and bolts
(3).
Use Allen key (7) to tighten the bolts.
NOTE:
The back panel (C), side panels (D), and top
rails (E), are labeled "INSIDE". To ensure
proper assembly, please make sure all these
parts are attached so that the INSIDE label
faces inside the crib.
2-in-1 Convertible Crib
DA7427B2
STEP 4
Insert barrel nuts (6) into the front rail (G) as shown below.
Attach front rail (G) to the left and right front posts (A1 & A2) with bolts (3) using Allen key (7).
Note: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the following steps.
NOTE:
The front rail (G) is labeled
"INSIDE". To ensure proper
assembly, the front rail (G)
must be attached to the side
panels (D) so that the
INSIDE label faces inside
the crib.
2-in-1 Convertible Crib
DA7427B2
STEP 5
Attach mattress support (H) to the posts (A1, A2, B1 and B2) with mattress support bolts
(8) using Allen key (7).
CORRECT
"THIS SIDE UP"
label shows which
side to face
upward.
CORRECT
* Tabs on corners of
mattress support should
point up.
NOTE: The above photos and drawings showing how to properly attach the
mattress support are for reference only. Crib styles and colors will vary.
2-in-1 Convertible Crib
DA7427B2
STEP 6
Insert wood dowels (5) into the left and right front post (A1 & A2).
Insert barrel nuts (6) into the front panel (F).
Attach front panel (F) to the front posts (A1 & A2) with bolts (3) and bolts (2) as shown.
Use Allen key (7) to tighten the bolts.
2-in-1 Convertible Crib
DA7427B2
STEP 7
Attach front rail (G) to the front panel (F) with bolts (4) using Allen key (7).
2-in-1 Convertible Crib
DA7427B2
WARNINGS:
* CAUTION- ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY
51-5/8 INCHES (69CM BY 131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES
(15CM).
* The day bed is not intended for children under 15 months of age or over 50 lbs (22.7 kgs).
DAY BED ASSEMBLY INSTRUCTION: STARTING FROM CRIB
STEP1:
Detach front panel (F) from the left and right front post (A1 & A2) with Allen key (7).
STEP 2:
If mattress support (H) is not in the lowest position, unscrew mattress support bolts (8)
from posts (A1, A2, B1, B2) and move to the lowest position.
STEP 3:
Ensure all bolts are tightly secured.
DAY BED ASSEMBLY: STARTING FROM SCRATCH
STEP 1:
Follow steps 1 to 5 of the crib assembly instruction.
STEP 2:
Follow steps 2 and 3 for the day bed assembly instruction located above (starting
from crib).
2-in-1 Convertible Crib
DA7427B2
CAUTION: This unit is intended for use only with the products
and/or maximum weights indicated. Use with other products and/or
products heavier than the maximum weights indicated may result
in instability or cause possible injury.
ANY MATTRESS USED IN THIS CRIB
MUST BE AT LEAST 27-1/4 INCHES
BY 51-5/8 INCHES (69CM BY 131CM)
WITH A THICKNESS NOT
EXCEEDING 6 INCHES (15CM).
Stop using crib when child begins to
climb out or reaches the height of 35
inches (89 cm).
Maximum weight not to exceed 50
pounds when used as a crib.
The DAY BED is not intended for
children under 15 months of age or
over 50 pounds (22.7 kgs).
Please remove all "INSIDE" labels after
crib assemble is completed.
That's it ! You've finished assembling your 2-in-1 Convertible Crib!
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our
customer service department. We will replace
the part FREE of charge.
Tel #: 1-800-295-1980
NEED HELP!
E-Mail: das@dorel.com
CALL US FOR ASSISTANC
Fax #: 514-353-7819
1-800-295-1980
DO NOT RETURN PRODU
E-MAIL:DAS@DOREL.CO
MODEL #: DA7427B2
Customer Service
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Customer Service Phone Number 1-800-295-1980
Customer Service Fax Number 514-353-7819
Email: das@dorel.com
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity: (Please be sure to list model number or SKN number)
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Download PDF
Similar pages