low voltage gel insulated joints

electrical technology
LOW VOLTAGE GEL INSULATED JOINTS
Gel insulated joints up to 0,6/1 kV
The gel technology
With the gel insulated jointing kits of the SHARK line, straight and branch jointings can be
carried out on single and multi-core low voltage cables up to 0,6/1 kV.
Without mixing or casting resins, the primary insulation, composed by a non-toxic insulating
polymeric gel, is already cross-linked inside a plastic shell with snap closure and allows the
reaccesibility of the jointing along the time.
The plastic external shells, insulating and strong, have different dimension depending on the
kind of cable and jointing to do and guarantee an optimum mechanical and electrical
protection.
All the models of the SHARK line are self- extinguishing and at low emission of smokes and
toxic gases, for mounting in galleries and in every place with fire risk and are in conformity
with the Directive Rohs 2002/95/CE.
The SHARK joints range is available in the folowing series:
• SHARK Classic Line
Five sizes with patented separators suitable for straight and parallel branch jointings on
single-core and multi-core cables up to four cores.
The sizes SHARK 125 and SHARK 150 include a mechanical connector and the Allen key
needed to screw down the screw.
In the version without separators, the joints allow straight and branch jointing of single core
cable of big cross section, the insulating of jointing of multi-couples telecom cables and the
insulating of electronic components.
• SHARK Series 400
Two sizes with patented separators suitable for 90° branch jointings on single-core and
multi-core cables up to four cores.
In the version without separators, the joints allow 90° branch jointing of single core cable
of big cross section.
• SHARK Series 500
Two sizes of joints with an integrated systems of multi-cores connector block for straight
and branch jointings on multi-cores cable up to five cores.
The multi-core connectors and the Allen key supplied together with the joints, reduce the
need of tools to complete the jointing.
• SHARK Series 600
Three sizes of joints with an integrated systems of branch multi-cores connector block for
branch jointings on single core and multi-core cables up to five cores.
The multi-core connectors, which allow to not intterupt the main cable, and the Allen key
supplied together with the joints, reduce the need of tools to do the jointing.
Technical characteristics
-
Conformity with standard CEI EN 50393
Self extinguishing in accordance with EN 60695-2-11;
Low smokes and gases emission in accordance with standard CEI-20-37/2-1 and CEI 20-37/7
Conformity with the Directive Rohs 2002/95/CE
Mechanical connectors included in the models SHARK 125 and SHARK 150 of the series
SHARK Classic Line
Mechanical insulated connectors included in whole SHARK Series 500 and SHARK Series 600
Operative temperature range: -20°C a +90°C
Applications
-
Straight and branch jointings on single and multi-core low voltage cable up to 0,6/1 kV.
For overhead, direct-buried, underground and immersed installations.
Pubblic and private street lighting plants, lighting plants in galleries and in every place
with fire risk, insulating of telecom cables and electronic components.
Advantage
-
Reaccesible
No mixing and casting resins
Fast and easy mounting
Without expiry date
Reduced numbers of tools needed
electrical technology
1
APPLICATION TABLE
®
STRAIGHT JOINTING
SINGLE CORE
CABLE
MULTI CORE
CABLE
CODE
ARTICLE
CABLE CROSS SECTION (mm2)
SH0125
SHARK 125
1 X 2,5 ÷10
SH0150
SHARK 150
1 X 16 ÷ 35
SH1406
SHARK 406/S
1 X 4 ÷ 50
SH1410
SHARK 410/S
1 X 70 ÷ 150
SH1416
SHARK 416/S
1 X 95 ÷ 240
SH0506
SHARK 506
3 - 5 X 1,5 ÷ 6
SH0516
SHARK 516
3 - 5 X 2,5 ÷ 16
SH0406
SHARK 406
2 - 4 X 1,5 ÷ 6
SH0410
SHARK 410
2 - 4 X 2,5 ÷ 10
SH0416
SHARK 416
2 - 4 X 10 ÷ 16
CROSS SECTION VALUED ON FLEXIBLE CABLE TYPE FG7
BRANCH JOINTING
SINGLE CORE
CABLE
MULTI CORE
CABLE
CODE
ARTICLE
MAIN CABLE
CROSS SECTION (mm2)
BRANCH CABLE
CROSS SECTION (mm2)
SH6150
SHARK 150Y
1 X 10 ÷ 50
1 X 2,5 ÷ 6
SH0125
SHARK 125
1 X 6 ÷ 25
1 X 1,5 ÷ 10
SH0150
SHARK 150
1 X 10 ÷ 50
1 X 2,5 ÷ 6
SH1406
SHARK 406/S
1 X 10 ÷ 50
1 X 2,5 ÷ 25
SH1410
SHARK 410/S
1 X 16 ÷ 95
1 X 16
SH1416
SHARK 416/S
1 X 95 ÷ 185
1 X 35
SH1425
SHARK 425/S
1 X 70 ÷ 150
1 x 10 ÷ 50
SH1435
SHARK 435/S
1 x 95 ÷ 240
1 x 50 ÷ 120
SH6516
SHARK 516Y
2 - 5 X 6 ÷ 16
2 - 5 X 2,5 ÷ 16
SH6535
SHARK 535Y
2 - 5 X 16 ÷ 35
2 - 5 X 2,5 ÷ 35
SH0506
SHARK 506
3 - 5 X 1,5 ÷ 6
3 - 5 X 1,5 ÷ 2,5
SH0516
SHARK 516
3 - 5 X 2,5 ÷ 10
3 - 5 X 1,5 ÷ 2,5
SH0406
SHARK 406
2 - 4 X 1,5 ÷ 6
2 X 1,5 ÷ 6
SH0410
SHARK 410
2 - 4 X 2,5 ÷ 10
2 - 4 X 1,5 ÷ 2,5
SH0416
SHARK 416
2 - 4 X 4 ÷ 16
2 - 4 X 1,5 ÷ 4
SH0425
SHARK 425
2 - 4 X 6 ÷ 25
2- 4 X 1,5÷ 16
SH0435
SHARK 435
2 - 4 X 10 ÷ 35
2 - 4 X 2,5 ÷ 25
CROSS SECTION VALUED ON FLEXIBLE CABLE TYPE FG7
NEW
SHARK 125 - 150
CLASSIC LINE
STRAIGHT JOINTING
SINGLE CORE CABLE STRAIGTH JOINTING
SHARK 406/S - 410/S - 416/S
CLASSIC LINE
MULTI CORE CABLE STRAIGHT JOINTING
UP TO 4 CORES
SHARK 506 - 516
SERIES 500
NEW
MULTI CORE CABLE STRAIGHT JOINTING
UP TO 5 CORES
SHARK 150Y
SERIES 500
NEW
SINGLE CORE 30° BRANCH JOINTING
SHARK 125 - 150
CLASSIC LINE
BRANCH JOINTING
SINGLE CORE PARALLEL BRANCH JOINTING
NEW
SHARK 516Y - 535Y
SERIES 500
MULTI CORE 30° BRANCH JOINTING
UP TO 5 CORES
SHARK 406 - 410 - 416
CLASSIC LINE
MULTI CORE PARALLEL BRANCH JOINTING
UP TO 4 CORES
SHARK 425 - 435
SERIES 400
MULTI CORE 90°
BRANCH JOINTING
UP TO 4 CORES
SHARK CLASSIC LINE
electrical technology
CLASSIC LINE
With the gel insulated joints kit of the SHARK CLASSIC LINE, straight and branch
jointings can be carried out on single and multi-core low voltage cables with maximum
four cores up to 0,6/1 kV.
A patented system of separators, stops the cable in the joint and allows the installation
and the insulating of four non-insulated connectors centred in the joint avoiding an
offset mounting in narrow spaces.
SHARK 125 and SHARK 150 kits include a brass mechanical connector for single-core
cable branch jointing without the interruption of the main cable.
Technical characteristics
-
Conformity with standard CEI EN 50393 (IMQ approval certificates CA01-00297,
CA01-00298)
Self extinguishing in accordance with EN 60695-2-11;
Low smokes and gases emission in accordance with standard CEI-20-37/2-1 and
CEI 20-37/7;
Conformity with the Directive Rohs 2002/95/CE
Brass mechanical connector included in the SHARK 125 and SHARK 150 models.
Operative temperature range: -20°C a +90°C
Applications
-
Straight and branch jointings on single and multi-cores low voltage cable ;
In the version without separators, insulating of multi- couples telecom cables and
the insulating of electronic components.
For overhead, direct-buried, underground and immersed installations.
Pubblic and private street lighting plants, lighting plants in galleries and in every
place with fire risk, insulating of telecom cables and electronic component
Advantage
6
Reaccesible
No mixing and casting resins
Fast and easy mounting
Without expiry date
Reduced need of tools
SHARK CLASSIC LINE
electrical technology
SHARK 125 • SHARK 150
Single core straight and branch jointing.
SHARK 125 and SHARK 150 kits include a brass mechanical connector for singlecore cable straight and branch jointing. In the branch jointing these connectors
avoide the interruption of the main cable.
The patented internal ribs, allow the placement and the blocking of the connector
supplied avoiding the slipping off of the cable and guarantee the right distance of
the connector from the border of the box and the presence of gel against the water
entry.
SHARK 406
SHARK 410 • SHARK 416
Horizontal separator
Straight and branch jointings on
multi-cores cable up to four cores.
A vertical patented separator moulded with th jointing-shell, inserted
between the cores of the cable, stops the cable in the joint from slipping
off.
A second patented separator, supplied in the kits, inserted
horizzontally between the cores and fitted in the slits of the
vertical separator, allows the installation of four non-insulated
connectors centred in the joint avoiding an offset mounting
in narrow spaces and guarantee the electrical insulating.
The patented internal ribs achieve increased
mechanical strenght, reinforced insulation, and assure
maximum tight against water penetration from side
openings, by maintaining the right distances between
the connectors and the external walls with the resulting
presence of gel in the needed quantity.
The nylon cable-ties supplied with the kit, inserted and
fastened in the side slits of the jointing-box, guarantee
the re-opening of the joint only with the use of a tool, as
specified by international standard IEC 364 (Safety of Electrical
Installation).
Vertical separator
The sizes for multi-cores cable SHARK 406, SHARK 410 and SHARK 410 are also available
in the version without separators (SHARK 406/S, Shark 410/S, Shark 416/S) for straight
and branch jointing on single-core cable of big cross-section, for the jointings of
multicouple telecom cables or the insulating of electronic components.
New
The joints of the series SHARK Classic Line are supplied in the new packaging in single
blister with all accessories needed.
Horizontal
separator
Ve r t i c a l
separator
Conductor
7
SHARK CLASSIC LINE
electrical technology
40
23
72
DIMENSIONS IN mm
125
SH0125
Applications
Straight and branch joint for single-core low voltage cable 0,6/1 kV with main cable
up to 25 sqmm.
The brass mechanical connector supplied in the kit, allows single-core cable straigth
and branch jointing avoiding the interruption of the main cable.
The connector, centered and placed in the ribs inside the joint, stops the cable in the
joint from the slipping off.
Kit contents in single blister:
- Gel insulated joint;
- Brass mechanical connector;
- Allen key;
- Cable-ties;
- Mounting instruction;
BRANCH JOINTING
STRAIGHT JOINTING
1 x 2,5 ÷ 10
MAIN CABLE
1 x 6 ÷ 25
27
47
BRANCH CABLE
1 x 1,5 ÷ 10
150
SH0150
86
Kit contents in single blister:
- Gel insulated joint;
- Brass mechanical connector;
- Allen key;
- Cable-ties;
- Mounting instruction;
DIMENSIONS IN mm
Applications
Straight and branch joint for single-core low voltage cable 0,6/1 kV with main cable up
to 50 sqmm.
The brass mechanical connector supplied in the kit, allows single-core cable straigth
and branch jointing avoiding the interruption of the main cable.
The connector, centered and placed in the ribs inside the joint, stops the cable in the
joint from the slipping off.
STRAIGHT JOINTING
1 x 16 ÷ 35
GIUNZIONE IN DERIVAZIONE
MAIN CABLE
1 x 10 ÷ 50
Single core cable stright jointing
BRANCH CABLE
1 x 2,5 ÷ 6
Single core cable branch jointing
Technical characteristics
• Brass mechanical connector and allen key included
• Conformity with standard CEI EN 50393 (IMQ approval certificates CA01-00297)
• Self extinguishing in accordance with EN 60695-2-11;
• Low smokes and gases emission in accordance with standard CEI-20-37/2-1 and CEI 20-37/7;
• Operative temperature range: -20°C a +90°C
8
SHARK CLASSIC LINE
electrical technology
50
29
406
SH0406
DIMENSIONS IN mm
145
Applications
Kit contents in single blister:
- Gel insulated joint;
- Separators;
- Cable-ties;
- Mounting instruction;
Straight and branch joint for multi-core low voltage cables 0,6/1kV with main cable
up to four cores 6 sqmm.
The vertical separator moulded in the joint and the horizontal separator supplied in
the kit, stop the cable in the joint and allow the installation and the insulating of four
non-insulated connectors centred in the joint avoiding an offset mounting in narrow
spaces.
BRANCH JOINTING
STRAIGHT JOINTING
2 - 4 x 1,5 ÷ 6
MAIN CABLE
BRANCH CABLE
2 - 4 x 1,5 ÷ 6
2 x 1,5 ÷ 2,5
Multi-core cable straight jointing
Branch joints on two single core cable
and one two-core cable
Multi-core cable branch jointing
50
29
406/S
SH1406
Applications
Thanks to the lack of the separators, the more space available inside the joint, allows
straight and branch jointing of single core cable up to 50 sqmm, the insulating of
jointing of of multi- couples telecom cables and the insulating of electronic components.
STRAIGHT JOINTING
1 x 4 ÷ 50
Kit contents in single blister:
- Gel insulated joint;
- Cable-ties;
- Mounting instruction;
BRANCH JOINTING
MAIN CABLE
1 x 10 ÷ 50
Single core cable stright jointing
DIMENSIONS IN mm
145
BRANCH CABLE
1 x 2,5 ÷ 25
Single core cable branch jointing
Insulating of connectors or electronic components
Technical characteristics
• Vertical and horizontal patented separators.
• Conformity with standard CEI EN 50393 (IMQ approval certificate CA01-00298)
• Self extinguishing in accordance with EN 60695-2-11;
• Low smokes and gases emission in accordance with standard CEI-20-37/2-1 and CEI 20-37/7;
• Operative temperature range: -20°C a +90°C
9
SHARK CLASSIC LINE
electrical technology
55
35
410
DIMENSIONS IN mm
146
SH0410
Applications
Straight and branch joint for multi-cores low voltage cables 0,6/1kV with main cable
up to four cores 10 sqmm.
The vertical separator moulded in the joint and the horizzontal separator supplied in
the kit, stop the cable in the joint and allow the installation and the insulating of four
non-insulated connectors centred in the joint avoiding an offset mounting in narrow
spaces.
Kit contents in single blister:
- Gel insulated joint;
- Separators;
- Cable-ties;
- Mounting instruction;
BRANCH JOINTING
STRAIGHT JOINTING
2 - 4 x 2,5 ÷ 10
Multi-core straight jointing
Multi-core cable branch jointing
BRANCH CABLE
2 - 4 x 2,5 ÷ 10
2 - 4 x 1,5 ÷ 2,5
Branch joints on two single core cable
and one two-core cable
410/S
35
55
MAIN CABLE
SH1410
DIMENSIONS IN mm
146
Kit contents in single blister:
- Gel insulated joint;
- Cable-ties;
- Mounting instruction;
Applications
Thanks to the lack of the separators, the more space available inside the joint, allows
straight and branch jointing of single core cable up to 150 sqmm, the insulating of
jointing of of multi- couples telecom cables and the insulating of electronic components.
STRAIGHT JOINTING
1 x 70 ÷ 150
BRANCH JOINTING
MAIN CABLE
1 x 16 ÷ 95
Single core cable stright jointing
Single core cable branch jointing
BRANCH CABLE
1 x 16
Insulating of connectors or electronic
components
Technical characteristics
• Vertical and horizontal patented separators.
• Conformity with standard CEI EN 50393 (IMQ approval certificate CA01-00298)
• Self extinguishing in accordance with EN 60695-2-11;
• Low smokes and gases emission in accordance with standard CEI-20-37/2-1 and CEI 20-37/7;
• Operative temperature range: -20°C a +90°C
10
SHARK CLASSIC LINE
electrical technology
69
40
416
SH0416
DIMENSIONS IN mm
Applications
180
Straight and branch joint for multi-cores low voltage cables 0,6/1kV with main cable
up to four cores 16 sqmm.
The vertical separator moulded in the joint and the horizzontal separator supplied in
the kit, stop the cable in the joint and allow the installation and the insulating of four
non-insulated connectors centred in the joint avoiding an offset mounting in narrow
spaces.
BRANCH JOINTING
STRAIGHT JOINTING
2 - 4 x 10 ÷ 16
Kit contents in single blister:
- Gel insulated joint;
- Separators;
- Cable-ties;
- Mounting instruction;
MAIN CABLE
2 - 4 x 4 ÷ 16
Multi-core straight jointing
BRANCH CABLE
2 - 4 x 1,5 ÷ 4
Multi-core cable branch jointing
69
40
416/S
Branch joints on two single core cable
and one two-core cable
SH1416
Applications
Thanks to the lack of the separators, the more space available inside the joint, allows
straight and branch jointing of single core cable up to 150 sqmm, the insulating of
jointing of of multi- couples telecom cables and the insulating of electronic components.
STRAIGHT JOINTING
1 x 95 ÷ 240
Kit contents in single blister:
- Gel insulated joint;
- Cable-ties;
- Mounting instruction;
BRANCH JOINTING
MAIN CABLE
1 x 95 ÷ 185
Single core cable stright jointing
DIMENSIONS IN mm
180
BRANCH CABLE
1 x 35
Single core cable branch jointing
Insulating of connectors or electronic
components
Technical characteristics
• Vertical and horizontal patented separators.
• Conformity with standard CEI EN 50393 (IMQ approval certificate CA01-00298)
• Self extinguishing in accordance with EN 60695-2-11;
• Low smokes and gases emission in accordance with standard CEI-20-37/2-1 and CEI 20-37/7;
• Operative temperature range: -20°C a +90°C
11
SHARK SERIES 500
electrical technology
SERIES 500
Gel insulated straight and branch joints for low voltage cable 0,6/1 kV up to five cores.
The insulated multi-section five-cores connectors, supplied included with the joints,
guarantee the double insulation and guarantee the right placing and stopping of the
cable inside the joint box.
The allen key needed to screw down the screw of the connectors is also supplied and
reduce the need of tools to complete the jointing.
Technical characteristics
-
Integrated insulated five-cores connector included;
Double insulation guaranteed with the use of insulated connectors supplied
Conformity with standard CEI EN 50393
Self extinguishing in accordance with EN 60695-2-11;
Low smokes and gases emission in accordance with standard CEI-20-37/2-1 and
CEI 20-37/7
Conformity with the Directive Rohs 2002/95/CE
Operative temperature range: -20°C a +90°C
Applications
-
Straight and branch jointings on single and multi-core low voltage cable 0,6/1 kV
up to five cores.
For overhead, direct-buried, underground and immersed installations.
Pubblic and private street lighting plants, lighting plants in galleries and in every
place with fire risk.
Advantages
-
Reaccesible
No mixing and casting resins
Fast and easy mounting
Without expiry date
Reduced numbers of tools needed
Insulated, five-cores
multisection
connectors with brass
metallic contact and
insulating body made of PA
6.6V0. For straight and branch
connection on cable up to five
cores.
Allen key included.
The connector placed between
the central ribs inside the joint,
guarantee the double
insulation and guarantee the
right positioning and blocking
of the cable inside the joint.
The nylon cable-ties supplied with the kit, inserted and fastened in the side slits of
the jointing-box, guarantee the re-opening of the joint only with the use of a tool, as
specified by international standard IEC 364 (Safety of Electrical Installation).
12
SHARK SERIES 500
electrical technology
55
35
506
SH0506
DIMENSIONS IN mm
Applications
146
Kit contents :
- Gel insulated joint;
- Five-cores insulated connector;
- Allen key;
- Cable ties;
- Mounting instruction;
Straight and branch joint for low volatge cable 0,6/1 kv up to five cores and cross
section of the main cable up to 6 sqmm.
The insulated five-cores connector supplied included in the kit, guarantees the double
insulation and placed in its seat guarantees the right positioning and the blocking of
the cable inside the joint.
STRAIGHT JOINTING
3 - 5 x1,5 ÷ 6 mm2
BRANCH JOINTING
MAIN CABLE
BRANCH CABLE
3 - 5 x 1,5 ÷ 6 mm2
3 - 5 x 1,5 ÷ 2,5 mm2
516
40
69
Cross section valued on flexible cable type FG7
SH0516
DIMENSIONS IN mm
180
Kit contents :
- Gel insulated joint;
- Five-cores insulated connector;
- Allen key;
- Cable ties;
- Mounting instruction;
Applications
Straight and branch joint for low volatge cable 0,6/1 kv up to five cores ans cross
section of the main cable up to 16 sqmm.
The insulated five cores connector supplied included in the kit, guarantees the double
insulation and placed in its seat guarantees the right positioning and the blocking of
the cable inside the joint.
STRAIGHT JOINTING
3 - 5 x 6 ÷ 16 mm2
BRANCH JOINTING
BRANCH CABLE
MAIN CABLE
3 - 5 x 6 ÷ 10 mm2
3 - 5 x 1,5 ÷ 2,5 mm2
Cross section valued on flexible cable type FG7
CAVO DERIVATO
CAVO
PASSANTE
Multi-core straight jointing
Multi-core sbranch jointing
Technical characteristics
• Insulated five-core connector and allen key included
• Double insulation guaranteed with the use of insulated connector supplied
• Conformity with standard CEI EN 50393
• Self extinguishing in accordance with EN 60695-2-11;
• Low smokes and gases emission in accordance with standard CEI-20-37/2-1 and CEI 20-37/7;
• Operative temperature range: -20°C a +90°C
13
SHARK SERIES 600
electrical technology
SERIES 600
Gel insulated branch joints for single-core and multi-cores low voltage cable 0,6/1 kV
up to five cores.
The innovative insulated branch connectors supplied included with the joints, allow
branch jointings without interruption of the main cable and guarantee the double
insulation and the right positioning and blocking of the cable inside the joint.
The allen key needed to screw down the screw of the connectors is supplied in the
kit and reduce the need of tools to complete the jointing.
Technical characteristics
-
Integrated insulated five-cores branch connector included;
Double insulation guaranteed with the use of insulated connectors supplied.
Conformity with standard CEI EN 50393
Self extinguishing in accordance with EN 60695-2-11;
Low smokes and gases emission in accordance with standard CEI-20-37/2-1 and
CEI 20-37/7;
Operative temperature range: -20°C a +90°C
Applications
-
Straight and branch jointings on single and multi-core low voltage cable up to
0,6/1 kV.
For overhead, direct-buried, underground and immersed installations.
Pubblic and private street lighting plants, lighting plants in galleries and in every
place with fire risk.
Advantages
-
Reaccesible
No mixing and casting resins
Fast and easy mounting
Without expiry date
Reduced numbers of tools needed
Single-core insulated connector for SHARK 150Y.
Brass metallic contact with screw and selfextinguishing insulated external body made of
PA 6.6 V0. For branch jointing of single-core
cable without interuption of the main cable.
Allen key supplied included in the kit.
Five-cores insulated branch connectors for joints
SHARK 516Y and SHARK 535Y.
Brass metallic contacts with screw and selfextinguishing insulated external body made of
PA 6.6 V0.
For branch jointing of cable up to fice cores
without interuption of the main cable.
Allen key supplied included in the kit.
The nylon cable-ties supplied with the kit, inserted and fastened in the side slits of
the jointing-box, guarantee the re-opening of the joint only with the use of a tool, as
specified by international standard IEC 364 (Safety of Electrical Installation).
14
SHARK SERIES 600
electrical technology
70
32
150Y
SH6150
Applications
Branch joint for single core low voltage cable 0,6/1 kV up to 50 sqmm. The insulated
mechanical connector supplied included in the kit, guarantees the double insulation
and allows branch jointings without interrupting the main cable.
The special connector’s seats inside the ribs joints, allows the right positioning and
the blocking of the cable.
MAIN CABLE NON
INTERRUPTED
WITH INCLUDED
INSULATED CONNECTOR
WITH CRIMPING*
CONNECTOR
Kit contents:
- Gel insulated joint;
- Five cores insulated connector;
- Allen key;
- Cable ties;
- Mounting instruction;
1 x 2,5 ÷ 6 mm2
MAIN CABLE
INTERRUPTED
BRANCH CABLE
mm2
1 x 2,5 ÷ 6 mm2
MAIN CABLE
DIMENSIONS IN mm
BRANCH CABLE
1 x 10 ÷ 50 mm2
1 x 6 ÷ 25
145
BRANCH CABLE
1 x 50 mm2
1 x 16 ÷ 50 mm2
* For the choise of a crimping or of another kind of connector, verify that dimension
of the connector fits in the stopping ribs inside the joint box.
Single core cable stright jointing
Technical characteristics
• Insulated mechanical branch connector and allen key included
• Double insulation guaranteed with the use of insulated connector supplied
• Conformity with standard CEI EN 50393
• Self extinguishing in accordance with EN 60695-2-11;
• Low smokes and gases emission in accordance with standard CEI-20-37/2-1 and CEI 20-37/7;
• Operative temperature range: -20°C a +90°C
15
SHARK SERIES 600
electrical technology
110
53
516Y
SH6516
Applications
220
DIMENSIONS IN mm
Kit contents :
- Gel insulated joint;
- Five cores insulated branch connector;
- Allen key;
- Vertical and horizontal separators;
- Cable ties;
- Mounting instruction;
Branch joint for multi-core low voltage cable 0,6/1 kV up to five cores 16 sqmm.
The innovative insulated five-core mechanical branch connector supplied in the kit,
guarantees the blocking of the cable inside the joint box, the double insulation and
allows branch jointings without interrupting the main cable.
A vertical separator and an horizontal separator are also always supplied loose in the
kit. Assembled together, they guarantee the blocking of the cable and the insulation
among the cores, when the insulated five-core branch connectors supplied is not used.
MAIN CABLE NON
CAVO
PASSANTE
ITERRUPTED
INTERROTTO
WITH INCLUDED
INSULATED CONNECTOR
2 ÷ 5 x 6 ÷ 16 mm2
MAIN CABLE
ITERRUPTED
2 ÷ 5 x 6 ÷ 10 mm2
BRANCH CABLE
CAVO DERIVATO
2 ÷ 5 x 2,5 ÷ 16 mm2
BRANCH CABLE
2 ÷ 5 x 2,5 ÷ 10 mm2
Multi core cable stright jointing
Technical characteristics
• Five-cores insulated branch connector and allen key included
• Double insulation guaranteed with the use of insulated connector supplied
• Conformity with standard CEI EN 50393
• Self extinguishing in accordance with EN 60695-2-11;
• Low smokes and gases emission in accordance with standard CEI-20-37/2-1 and CEI 20-37/7;
• Operative temperature range: -20°C a +90°C
16
SHARK SERIES 600
electrical technology
130
65
535Y
SH6535
Applications
Branch joint for multi-core low voltage cable 0,6/1 kV up to five cores 35 sqmm. The
innovative insulated five-core mechanical branch connector supplied in the kit,
guarantees the blocking of the cable inside the joint box, the double insulation and
allows branch jointings without interrupting the main cable.
A vertical separator and an horizontal separator are also always supplied loose in the
kit. Assembled together, they guarantee the blocking of the cable and the insulation
among the cores, when the insulated five-core branch connectors supplied is not used.
MAIN CABLE NON
ITERRUPTED
WITH INCLUDED
CON MORSETTIERA
INSULATED CONNECTOR
ISOLATA A CORREDO
2 ÷ 5 x 16 ÷ 35 mm2
MAIN PASSANTE
CABLE
CAVO
ITERRUPTED
INTERROTTO
2 ÷ 5 x 16 ÷ 25 mm2
260
DIMENSIONS IN mm
Kit contents :
- Gel insulated joint;
- Five cores insulated branch connector;
- Allen key;
- Vertical and horizontal separators;
- Cable ties;
- Mounting instruction;
BRANCH CABLE
2 ÷ 5 x 2,5 ÷ 35 mm2
CAVO DERIVATO
BRANCH
CABLE
2 ÷ 5 x 2,5 ÷ 25 mm2
Multi core cable stright jointing
Technical characteristics
• Five-cores insulated branch connector and allen key included
• Double insulation guaranteed with the use of insulated connector supplied
• Conformity with standard CEI EN 50393
• Self extinguishing in accordance with EN 60695-2-11;
• Low smokes and gases emission in accordance with standard CEI-20-37/2-1 and CEI 20-37/7;
• Operative temperature range: -20°C a +90°C
17
SHARK SERIES 400
electrical technology
SERIES 400
With the gel insulated joints kit of the SHARK SERIES 400, 90° branch jointings can
be carried out on single and multi-core low voltage cables with maximum four cores
up to 0,6/1 kV.
A patented system of separators, stops the cable in the joint and allows the installation
and the insulating of four non-insulated connectors centred in the joint avoiding an
offset mounting in narrow spaces.
Technical characteristics
-
Conformity with standard CEI EN 50393 (IMQ approval certificates CA01-00299)
Self extinguishing in accordance with EN 60695-2-11;
Low smokes and gases emission in accordance with standard CEI-20-37/2-1 and
CEI 20-37/7;
Conformity with the Directive Rohs 2002/95/CE
Operative temperature range: -20°C a +90°C
Applications
-
90° branch jointings on single and multi-cores low voltage cable;
For overhead, direct-buried, underground and immersed installations.
Pubblic and private street lighting plants, lighting plants in galleries and in every
place with fire risk, insulating of telecom cables and electronic component
Advantage
18
Reaccesible
No mixing and casting resins
Fast and easy mounting
Without expiry date
Reduced need of tools
SHARK SERIES 400
49
electrical technology
425
125
SH0425
Applications
DIMENSIONS IN mm
90° branch joint for multi-cores low voltage cables 0,6/1kV with main cable up to four
cores 25 sqmm.
The vertical separator moulded in the joint and the horizontal separator supplied in
the kit, stop the cable in the joint and allow the installation and the insulating of four
non-insulated connectors centred in the joint avoiding an offset mounting in narrow
spaces.
210
Kit contents :
- Gel insulated joint;
- Separators;
- Cable-ties;
- Mounting instruction;
BRANCH JOINTING
MAIN CABLE
2 - 4 x 6 ÷ 25
BRANCH CABLE
2 - 4 x 1,5 ÷ 16
49
Multi-core cable
90° branch jointing
425/S
125
SH1425
Applications
DIMENSIONS IN mm
Joint without separtors for 90° branch jointing on single core low voltage cable 0,6/1 kV.
Thanks to the lack of the separators, the more space available inside the joint, allows
branch jointing of single core cable with cross section of the main cable up to 150
sqmm.
210
Kit contents :
- Gel insulated joint;
- Cable-ties;
- Mounting instruction;
BRANCH JOINTING
MAIN CABLE
1 x 70 ÷ 150
BRANCH CABLE
1 x 10 ÷ 50
Single core cable
90° branch jointing
Technical characteristics
• Branch cable exit at 90°
• Without separators
• Conformity with standard CEI EN 50393 (IMQ approval certificate CA01-00299)
• Self extinguishing in accordance with EN 60695-2-11;
• Low smokes and gases emission in accordance with standard CEI-20-37/2-1 and CEI 20-37/7;
• Operative temperature range: -20°C a +90°C
19
SHARK SERIES 400
electrical technology
46
435
SH0435
143
DIMENSIONS IN mm
250
Kit contents :
- Gel insulated joint;
- Separators;
- Cable-ties;
- Mounting instruction;
Applications
90° branch joint for multi-cores low voltage cables 0,6/1kV with main cable up to
fourcores 35 sqmm.
The vertical separator moulded in the joint and the horizontal separator supplied in the
kit, stop the cable in the joint and allow the installation and the insulating of four noninsulated connectors centred in the joint avoiding an offset mounting in narrow spaces.
BRANCH JOINTING
MAIN CABLE
2 - 4 x 10 ÷ 35
BRANCH CABLE
2 - 4 x 2,5 ÷ 25
Multi-core cable
90° branch jointing
46
435/S
143
DIMENSIONS IN mm
250
Kit contents :
- Gel insulated joint;
- Cable-ties;
- Mounting instruction;
SH1435
Applications
Joint without separtors for 90° branch jointing on single core low voltage cable
0,6/1 kV.
Thanks to the lack of the separators, the more space available inside the joint, allows
branch jointing of single core cable with cross section of the main cable up to 240 sqmm.
BRANCH JOINTING
BRANCH CABLE
MAIN CABLE
GIUNZIONE IN LINEA
1 x 95 ÷ 240
1 x 50 ÷ 120
Single core cable
90° branch jointing
Technical characteristics
• Branch cable exit at 90°
• Without separators
• Conformity with standard CEI EN 50393 (IMQ approval certificate CA01-00299)
• Self extinguishing in accordance with EN 60695-2-11;
• Low smokes and gases emission in accordance with standard CEI-20-37/2-1 and CEI 20-37/7;
• Operative temperature range: -20°C a +90°C
20
ETELEC S.p.A.
Via D. De Roberto, 44 - 80143 Naples - Italy
tel. +39 081 5846610 Fax +39 081 2587166
www.etelec.it etelec@etelec.it
Download PDF
Similar pages