7CLM / 7SI Hybrid Twin System
Integrates fountain and ice treatment applications into a single manifold
APPLICATIONS
Fountain
Ice
BENEFITS
Hybrid manifold design integrates two
independent systems (primary and secondary) into
one manifold configuration providing two distinct
water qualities, one for fountain and one for ice.
NSF Certified under NSF / ANSI Standards 42 & 53.
Small system footprint is easy to install and service.
7CLM Primary System
Reduces chloramines, chlorine taste and odor
and other offensive contaminants that can
adversely affect the taste of beverages.
Improves the taste of fountain beverages and
helps retain carbonation.
Submicron technology reduces dirt and particles
as small as 1/2-micron in size, and reduces health
contaminants such as Cryptosporidium and
Giardia cysts.
Helps protects drink system seals, gaskets, pumps
and tubes from chloramines damage.
Hybrid Twin - 7CLM / 7SI System: EV9278-20
Hybrid Twin - 7
CLM / 7SI Replacement Cartridge Kit: EV9693-82
Contains: T wo (2) 7CLM Cartridges; One (1) 7SI Cartridge
7SI Secondary System
Utilizes depth filtration and proprietary Fibredyne™
media for superior dirt holding capacity.
Reduces water-related ice machine problems
caused by scale build-up from dirt and dissolved
minerals (as tested by Everpure).
Self-contained scale inhibitor feed keeps ice
machines functioning at full capacity (as tested
by Everpure).
Reduces maintenance and service costs by
reducing scale (as tested by Everpure) and clogging
of distribution lines, evaporator plate and pump.
OPERATIONAL TIPS
Change cartridges on a regular 6 month
preventative maintenance program.
Change cartridges when capacity is reached or
when pressure falls below 10 psi.
Service flow rate must not exceed cartridge rating.
Always flush the filter cartridge at time of
installation and cartridge change.
Foodservice
SPECIFICATIONS
Overall Dimensions:
25.28" h x 25.17" w x 5.25" d
(64.21 cm h x 63.93 cm w x 13.34 cm d)
Pressure Requirements
10 -125 PSI (0.7 – 8.6 bar)
Maximum Temperature:
35 - 100°F (2 - 38°C)
Electrical Power Supply:
None required
System
Service Flow Rate
Rated Capacity
Hybrid Twin (2.0) 7CLM
2.0 gpm (7.5 Lpm)
16,000 gal. (60,567 L)
Hybrid Twin (2.66) 7CLM
2.66 gpm (10.07 Lpm)
11,000 gal. (41,640 L)
Hybrid Twin (3.4) 7CLM
3.4 gpm (12.87 Lpm)
7,200 gal. (27,255 L)
3.5 gpm (13.25 Lpm)
Particulate and scale inhibition
up to 25,000 gallons.*
Primary Twin System
Secondary Single System
7SI
* Estimated. Actual capacity may vary depending on volume of particulate in incoming water.
7CLM / 7SI Hybrid Twin
EV9278-20
INSTALLATION TIPS
Connect minimum 1/2" water line.
Install vertically with cartridge hanging down.
Allow 21⁄2" clearance below the cartridge for easy
cartridge replacement.
Flush 7CLM & 7SI cartridges by running water
through filter.
This system must be installed and maintained
according to the manufacturer’s instructions,
including installation and replacement of filter
cartridges.
The contaminants or other substances removed
or reduced by this drinking water system are not
necessarily in your water. Do not use with water
that is microbiologically unsafe or of unknown
quality without adequate disinfection before
or after the system. Systems certified for cyst
reduction may be used with disinfected water
that may contain filterable cysts.
Hybrid with 7SI cartridge Tested and Certified by
NSF International against NSF/ANSI Standards 42
and 53 for the reduction of:
25.17"
Everpure water treatment systems are covered by
a limited warranty against defects in material and
workmanship for a period of one year after date of
purchase. Everpure replaceable elements (filter cartridges
and water treatment cartridges) are covered by a limited
warranty against defects in material and workmanship for
a period of one year after date of purchase. See printed
warranty for details. Everpure will provide a copy of the
warranty upon request.
Standard No. 42 —
Aesthetic Effects
Mechanical Filtration
Particulate Class I
Standard No. 42 —
Aesthetic Effects
Chemical Reduction
Taste and Odor
Chloramines
Chlorine
Mechanical Filtration
Particulate Class I
For Technical Assistance, please
email: servicespecialist@pentair.com
or call: 800-942-1153 (local: 630-307-3000).
Everpure-SHURflo India
Green Boulevard, B-9/A, 7th Floor Tower B Sector 62, Noida - 201301
TEL: 91.120.419.9444
FAX: 91.120.419.9400
EMAIL: indiacustomer@pentair.com
Everpure-SHURflo Japan Inc.
Hashimoto MN Bldg. 7F
3-25-1 Hashimoto, Midori-ku
Sagamihara-Shi Kanagawa 252-0143
JAPAN
TEL: 81.(0)42.775.3011
FAX: 81.(0)42.775.3015
EMAIL: info@everpure.co.jp
©2012 Pentair Filtration Solutions, LLC Everpure-SHURflo China
21F Cloud 9 Plaza, No 1118,
Shanghai, 200052
CHINA
TEL: 86.21.3211.4588
FAX: 86.21.3211.4580
EMAIL: China.Water@Pentair.com
Standard No. 53 —
Health Effects
Mechanical Filtration
Turbidity
Cyst
EV9278-20 Hybrid Twin 7CLM 7SI AU12
Visit our website at www.everpure.com
Pentair Filtration Solutions, LLC
World Headquarters-Everpure/SHURflo
North and South America Sales
1040 Muirfield Dr.
Hanover Park, Illinois 60133
USA
TEL: 800.942.1153 (US only)
TEL: 630.307.3000
FAX: 630.307.3030
EMAIL: cseverpure@pentair.com
Mechanical Filtration
Cyst
Hybrid with 7CLM cartridge Tested and Certified
by NSF International against NSF/ANSI Standard
42 and 53 for the reduction of:
25.28"
Everpure reserves the right to update specifications,
change prices, or make substitutions without notice.
Standard No. 53 —
Health Effects
Everpure-SHURflo
Australia / New Zealand
1-21 Monash Drive
Dandenong South,VIC 3175
Australia
TEL: 1300 576 190
EMAIL: au.everpure@pentair.com
Everpure-SHURflo Southeast Asia
18 Boon Lay Way
#04-110/111
TradeHub 21, 609966
SINGAPORE
TEL: 65.6795.2213
FAX: 65.6795.2219
EMAIL: cseverpure@pentair.com
Everpure-SHURflo Europe
Pentair Water Belgium bvba
Industriepark Wolfstee
Toekomstlaan
30 B-2200 Herentals, BELGIUM
TEL: +32.(0).14.283.500
FAX: +32.(0).14.283.505
EMAIL: sales@everpure-europe.com
Download PDF
Similar pages