www.girbau.com
LAUNDRY EQUIPMENT
PRO SERIES
When quality and savings are all in the control
HS-6008PRO
MS-610PRO
MS-613PRO
MS-617PRO
MS-623PRO
WHEN QUALITY AND SAVINGS ARE ALL IN THE CONTROL
LOGI PRO
Laundry quality and savings means matching each program as closely as possible to each
washing requirement. An optimal control of water levels, time, intensity of mechanical action and
dosage ensures the best washing results with the lowest consumption of resources
MORE FUNCTIONS, MORE PROGRAMS, MORE FEATURES
Girbau’s 50 years of experience in the laundry
business, plus its commitment to helping you
achieve the highest quality and profitability for
your laundry, have led to the development of
LOGI PRO control, the perfect tool for creating
up to 25 tailored programs.
With LOGI PRO each and every one of the
wash parameters can be programmed, to
ensure that each load in your laundry is
processed as optimally as possible.
WATER CONSUMPTION
HS-6008PRO MS-610PRO MS-613PRO MS-617PRO
MS-623PRO
ENERGY CONSUMPTION
, AUTOMATIC WATER AND DISPENSING ADJUSTMENT
LOGI PRO incorporates the JUST IN LOAD function, which can automatically adjust the amount of water and chemical (adjustment
depending on dosing time) according to the weight of the load and the program selected. You only need to use the selection keys to
indicate the quantity of load in the drum - three quarters, half or quarter load. These functions can be deactivated.
CHEMICAL
WATER CONSUMPTION
The 6 Series with LOGI PRO and INTELI control incorporate the JUST IN
LOAD function that adjusts the consumption of water and the proportional
dosing time according to the program selected and depending on the weight
of the load.
Other manufacturers
consumption
ENERGY CONSUMPTION
Proportional
Water Consumption
Proportional
Chemical Consumption
consumption with
“Just in Load”
GIRBAU Laundry equipment
PROGRAMMING THE WASH
Optimising the time and the consumption of energy resources, and helping to organise
the work in the laundry.
This is also what the professional LOGI PRO control sets out to do.
To do so it incorporates functions such as the Rinse Hold key, which halts the spin
cycle or final spin, leaving the load to soak and thereby preventing creases if the
machine cannot be unloaded immediately.
Rinse Hold – Anti-crease Function
You can also activate the Delay function, programming the washing machine so that it
starts at the desired time.
For example, if you want to take advantage of an off-peak nightly reduced rate or want
to optimise your business time, you can programme the washing machine to start up in
the evening with the crease guard function.
When you arrive at the laundry first thing in the morning, you will find the load washed
and ready to spin.
All you need to do is turn on the spin. You will have saved time and energy.
Delay option – Timed start-up
PROGRAMMING WITH GIRBAU
Programming a Girbau washer is extremely straightforward, not only due
to its easy to activate options and configuring of the washing parameters
of the LOGI PRO professional control, which allows you to create up to
25 programs, but also because of the programming concept that Girbau
always applies in their washing machines.
THE GIRBAU PHASE CONCEPT
A LOGI PRO program contains from 1 to 11 phases. A phase is a grouping
of functions (such as water entry, level, dosing) which are repeated
sequentially throughout a program.
Programming a Girbau washer is simply a case of defining the stages
depending on how we want the washing machine to perform, as the
enclosed chart shows.
Each phase always has the same variable programming functions.
The phases add up to form a program.
STRUCTURE OF A GIRBAU PROGRAM
Phase
1 10
Ph
Y-N
L
0-6
C
0-90
1d
0-4
t1
1-99
2d
0-4
t2
1-99
r
Hi-Md-Lo-no
rt
0-20
c
0-1
rh
0-1
E
0-6
Et
1-9
11
Y
0-6
0-90
0-4
1-99
0-4
1-99
Hi-Md-Lo-no
0-20
0-1
0-1
1-6
1-9
ESTRUCTURA DE UNA FASE GIRBAU
Ph
YES - NO
L
Water level - from 0 to 6
C
Temperature - 0-90ºC, 32-194ºF
1d
1st dosing – Choose from 0 to 4
t1
Dosing time – from 1 to 99 seconds
2d
2nd dosing – Choose from 0 to 4
t2
Dosing time – from 1 to 99 seconds
r
Rotation sequences on/off
rt
Drum rotation time – The rotation time can be programmed from 0 to 20 minutes.
c
Cool down – Can be activated if the temperature of the bath exceeds 45ºC, 113ºF
rh
Halt before emptying the bath – The program is halted until resumed by a manual order
E
Draining / Spin speed – Choose from 0 to 6
Et
Draining - Choose from 1 to 9 minutes
GIRBAU Laundry equipment
Easy and sustainable solutions
The philosophy behind Girbau’s vision of the laundry world is summed up in Easy&Best
Solutions (E&B), and consists of creating flexible laundry solution packages that are
adapted to each sector, so that each customer can easily find the solution they are
looking for in terms of products and services.
E&B is the result of Girbau’s 50 plus years of experience in the sector.
In addition, the E&B solutions are environmentally friendly.
We design efficient laundries, in tune with your business and its setting.
We look after your laundry, we look after your image.
BRANCHES
Argentina - Buenos Aires -Tel. +54-1 149017600 - girbauargentina@girbau.com.ar
Australia - Castle Hill, Sydney - Tel. +61298940399 - sales@acle.com.au
Brazil - Sao Paulo - Tel. +55 11-29820446 - girbaudobrasil@girbau.com.br
China - Shenzhen - Tel. +86-755-8211 1330 – info@girbau.com.cn
Cuba - La Habana - Tel. (+53-7) 8662071 al 73 - girbau@girbau.co.cu
Dominican Rep. - Punta Cana - Tel. +1 809-959-0615 - info@girbau.do
France - Roissy (Paris) - Tel. +33 1-49388585 - info@girbau.fr
Germany - Hannover - Tel. +49-5119357570 - girbau@girbau.de
Italy - Venezia - Tel. +39 335 7294655 - info@girbau.com
U.A.E. - Dubai - Tel. +971 4-8839951 - sales@girbau.ae
U.K. - Hitchin - Tel. +44(0)-1462 427780 - info@girbau.co.uk
U.S.A. - Oshkosh, Wi - Tel. +1(920) 2318222 - info@continentalgirbau.com
P00310 10/11
HEADQUARTERS
GIRBAU, S.A. Ctra de Manlleu, km. 1 - 08500 Vic (Barcelona) Spain - www.girbau.com
Tel. (+34) 93 886 2219 - Fax (+34) 93 886 0785 - sales@girbau.es
Download PDF
Similar pages