IMPORTANT SAFETY INSTRUCTIONS: a. READ

D类电池盒的LED灯串(户外)英文说明书尺寸:210 x 145mm
IMPORTANT SAFETY INSTRUCTIONS:
When using electrical products, basic precautions should always be followed including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
a.
b) Do not use the seasonal products outdoors unless marked suitable for indoor and outdoor use.
c) This seasonal use product is not intended for permanent installation or use.
d) Do not mount or place near gas or electric heaters, fireplace, candles or other similar source of heat.
e) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
f) Do not let lamps rest on the supply cord or on any wire.
g) Unplug the product when leaving the house, when retiring for the night, or if left unattended.
h) This is an electric product - not a Toy! To avoid risk of fire, burns, personal injury and electric shock, it
should not be played or placed where small children can reach it.
i) Do not use this product for other than its intended use.
j) Do not hang ornaments or other objects from cord, wire, or light string.
k) Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
l) Do not cover the product with cloth, paper or any materials not part of the product when in use.
m)This product is equipped with push-in LED type lamps. Do not twist lamps.
n) Read and follow all instructions that are on the product or provided with the product.
0)
SAVE THESE INSTRUCTIONS
c) Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed
wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
d) When storing the product, carefully remove the product from wherever it is placed, including tree branches or
bushes, to avoid any undue strain or stress on the product conductors, connections, and wires.
e) When not in use, store neatly in a cool,dry location protected from sunlight.
f) The LED lamp has polarity. Do not deliberately change the direction of the LED lamp in the lampholder.
USER SERVICING INSTRUCTIONS
Replace the lamp:
Step 1: You will find the battery control box on the back side of this product. Turn the switch to the “OFF”
position.
Step 2: Lift up to unsnap locking tab,
then pull lamp and plastic base
straight out of lampholder.
Step 3: Replace lamp with only 3.6 Volt,
0.072 Watt LED type lamps provided with
this product.
CAUTION:
Risk of Fire. This priduct does not contain lamp shunts in order to allow the product to
operate if one lamp burns out. Do not replace lamps with other than the spare lamps provided with this product.
For Indoor and outdoor use .
CAUTION:
To reduce the risk of fire and electric shock:a) Do not install on trees having needles,
leaves or branch covering of metal or materials which look like metal, b) Do not mount or support strings in a
manner that can cut or damage wire insulation.
USE AND CARE INSTRUCTIONS
a) When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on
live trees in which the needles are brown or break off easily, Keep the tree holder filled with water.
b) If the product is placed on a tree, the tree should be well secured and stable.
MADE IN CHINA
Download PDF
Similar pages