IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY

Atlas
Instruction Manual
IMPORTANT PLEASE READ THESE INSTRUCTIONS
CAREFULLY BEFORE USING THIS PRODUCT
KEEP FOR FUTURE REFERENCE
2
Safety Warnings
Getting to know your Stroller
Thank you for choosing Obaby. To ensure that your stroller is used in accordance with
these instructions, please read them fully.
This stroller conforms to EN 1888:2003 and is guaranteed for 6 months from the date of
purchase against manufacturing defects. If, however you have any problems, please
contact your Obaby retailer from whom you purchased your product, who will take
appropriate action.
Hood adjustment
catch
Your child’s safety may be affected if you do not follow these
instructions.
WARNING: A child’s safety is your responsibility
WARNING: Ensure that all locking devices are engaged before use
3
Harness
WARNING: Children should be harnessed in at all times. Always use
the crotch strap in combination with the waist belt
WARNING: DO NOT hang shopping bags from the handle as this
may affect the stroller’s stability. Use the basket provided maximum weight 3kg
Calf rest
Shopping basket
WARNING: This product is not suitable for running or skating.
Never run or skate with your stroller, especially across roads
WARNING: It may be dangerous to leave your child unattended
WARNING: Do not use this product as a bed, your child may
become tangled in straps and suffocate
WARNING: The child should be clear of moving parts while making
adjustments or opening or folding the stroller. Risk of serious injury
(entrapment, laceration or amputation) exists
Front swivel
wheel levers
• This stroller requires regular maintenance by the user
• Overloading, incorrect folding and the use of non approved
accessories may cause damage or break the stroller
• It may be unsafe to use replacement parts or accessories e.g. child
seats, bag hooks, rain covers, etc, other than those approved by the
manufacturer or distributor
• Always balance the weight of the stroller evenly
• We advise that your stroller is not stored or left out side at any time
• This stroller is intended to carry one child from birth and up to a
maximum weight of 15kg
ROUTINE CARE & MAINTENANCE
- For cleaning, use only a mild detergent and warm water
- DO NOT USE BLEACH
- DO NOT USE any abrasive substances
- From time to time, check your stroller for loose screws, worn parts,
torn material or stitching. Replace or adjust the parts as needed.
Due to constant updating and improvements, some components may occasionally differ slightly from
the images shown in these instructions. We reserve the rights to change the specifications of any
products without prior notice. If you need any assistance please contact your Obaby retailer from
whom you purchased your product, who will take appropriate action.
www.obaby.co.uk
Storage clip
Carry handle
Backrest release
toggle
Secondary release
lock
Primary release
lock
Brake levers
www.obaby.co.uk
4
Opening your Stroller
Folding your Stroller
5
1. Pull
Press
Press
fig. 1
2. Lift
fig. 3
fig. 2
fig. 7
fig. 8
fig. 9
Press
Press
“Click”
fig. 4
fig. 5
fig. 6
To open your stroller release the storage clip on the side of the stroller (fig.1 & 2).
Lift the handles away from the wheels (fig.3).
Using your foot push down on the primary release lock at the back of the stroller (fig.4).
Ensure the lock clicks into place (fig.5 & 6).
WARNING: Ensure that all locking devices are engaged before use.
The child should be clear of moving parts while making adjustments or opening or
folding the stroller. Risk of serious injury (entrapment, laceration or amputation)
exists.
www.obaby.co.uk
fig. 10
fig. 11
Before attempting to fold your stroller
- The front wheels should be locked in place
- The basket and seat unit should be empty
- The hood should be folded
- The seat should be fully upright
To fold the stroller, release the primary lock, at the back of the stroller, by pulling away
from the stroller and then lifting using your hand or foot (fig.7).
Next, using your foot press down on the secondary lock at the right hand side of the
stroller (fig.8). Then push the handles forwards and down towards the front wheels
(fig.9), until completely folded (fig.10). Engage the storage clip on the front leg of the
stroller (fig.11).
www.obaby.co.uk
6
Fitting and Removing the Front Wheels
Applying the Brakes
Release
Lock
fig. 12
fig. 13
fig. 14
To fit the front wheels, push the wheels onto the front legs until they click into place.
fig. 18
7
fig. 19
To lock the brakes fully, push down on each brake lever using your foot (fig.18).
To release the brakes, lift each brake lever using your foot (fig.19).
Using the Front Swivel Wheels
Adjusting the Backrest
2.Pull
1.Press
Release
Lock
fig. 15
fig. 16
fig. 17
fig. 20
fig. 21
fig. 22
To lock the swivel wheels, first ensure the front wheels are facing forward inline with the
chassis, then lift the lever up (fig.15).
To recline the backrest, press the button on the toggle and pull away from the seat to the
desired height (fig.20). Lower the seat to rest on the toggle (fig.21).
To put the wheels in swivel mode, push the lever down on the front of each front wheel
(fig.16 & 17).
To put upright, grip the sides of the toggle with one hand, and the strap with the other
hand and slide the toggle up the strap to the desired height (fig.22).
www.obaby.co.uk
www.obaby.co.uk
8
Fitting and Removing the Hood
Using the Harness
9
Chest
Strap
Clasp
Waist
Strap
fig. 23
fig. 24
fig. 25
fig. 29
fig. 30
fig. 31
fig. 33
fig. 34
Crotch
Strap
To fit the hood, place the hood on the chassis, inline with the seat unit. Clip the hood
catches onto each side of the chassis (fig.23 & 24).
Then to prevent the hood slipping down pull the elastic around the chassis and loop over
the peg on the side of the hood (fig.25).
Press
Adjusting the Hood
fig. 32
To fasten the harness, insert both fasteners on the waist strap into the clasp on the
crotch strap (fig.29) and clip each chest strap onto the waist strap (fig.30 & 31).
To release the harness, squeeze each of the clips in the centre of the harness and pull
away from the clasp, one at a time (fig.32).
Adjust the harness length using the buckles on each strap (fig.33).
fig. 26
fig. 27
fig. 28
To fold the hood, pull the hood adjusters up on both sides of the hood, as shown above.
www.obaby.co.uk
‘D’ Ring
The ‘D’ rings highlighted are provided for fitting a separate harness complying with BS
6684 (fig.34).
WARNING: Ensure the harness is correctly fitted before use. The harness should
always be adjusted to fit correctly. Children should be harnessed in at all times.
Always use the crotch strap in combination with the waist strap.
www.obaby.co.uk
Adjusting the Calf Rest
10
Press
fig. 35
fig. 36
fig. 37
To adjust the calf rest press the levers either side of the seat and lift or lower to the
correct position.
Fitting the Raincover
Press
fig. 38
fig. 39
fig. 40
To fit the raincover, place the raincover over the stroller and allow the raincover to drape
over the front of the stroller.
Secure in place using the velcro tabs on the back of the raincover (fig.38) and clip onto
the front legs of the stroller (fig.39 & 40).
WARNING: When using the raincover, regularly check your child has adequate
ventilation and is not overheating.
Unless it is raining, the raincover should be removed.
www.obaby.co.uk
Download PDF
Similar pages