1GB to 8GB
Industrial Grade USB Flash Drive
www.stec-inc.com
SLUFDxGU2U(I)
Capacity: 1GB - 8GB
USB 2.0 Compliant
LED activity indicator
Customizable for logo/graphic design
High Reliability:

Guaranteed 2M Program/Erase
Cycles

Advanced Wear-Leveling

BCH ECC Engine corrects up to
6 bits/512 Bytes errors
 Automatic Bad Block Management
 Single Level Cell (SLC) NAND Flash
Memory
General Description
STEC’s Industrial Grade USB Flash Drive (UFD) is more than just portable storage.
Tailored for industrial applications that require high reliability and data throughput, it
provides non-volatile, industrial grade solid-state storage in a thumb-drive package.
In addition, laser-etched manufacturing information allows for lot traceability and
complete info on the Bill of Materials.
The Industrial Grade UFD is available in an ESD rated enclosure (with LED light
indicator) for applications that require NEBS Level 3 compliancy. The ESD-rated
enclosure has been tested for immunity from ESD for 8KV contact and 15KV air.
STEC’s U2, state-of-the-art, USB 2.0 flash memory controller is incorporated in the
Industrial Grade UFD, providing high data integrity and endurance. The flash
management software that is embedded in the controller emulates a hard disk,
enabling read/write operations that are identical to a standard, sector-based hard
disk. Sophisticated wear leveling algorithms ensures greater flash endurance, while
automatic bad block management and a built-in ECC Engine guarantee the highest
data reliability. Based on the BCH error correct algorithm, the ECC engine can
correct up to 6-bit errors per 512 bytes.
High performance, high reliability and a controlled Bill-Of-Materials make the
Industrial Grade UFD the product of choice in industrial applications, such as POS
Workstations, Networking Equipment, automotive diagnostics and Industrial PCs.
The UFD is fully customizable to add a company logo, graphic design, or text. In
addition, STEC offers value-added services to OEM customers, such as pre-loaded
content and controlled Bill Of Materials.
Ordering Information: USB Flash Drive
 10 Year Data Retention
NEBS Level 3 compliant for ESD
 8KV Contact, 15KV Air
Lot Traceability
Commercial and Extended Operating
Temperature
RoHS-6 Compliant
Part Number
Capacity
SLUFD1GU2U(I)
1 GBytes
SLUFD2GU2U(I)
2 GBytes
SLUFD4GU2U(I)
4 GBytes
SLUFD8GU2U(I)
8 GBytes
Legend:

SLUFD = STEC standard USB Flash Drive part number prefix.

G = proceeding capacity (x) is in Gigabytes (G).

U2 = STEC U2 controller.

U = RoHS-6 compliant

Part numbers without (I) = Commercial temperature range (0ºC to 70ºC).

I = Extended temperature range (-15ºC to 85ºC).
SLUFDxGU2U(I)
Datasheet
Industrial Grade USB Flash Drive
Table of Contents
General Description ................................................................................................................. 1
Ordering Information: USB Flash Drive ................................................................................. 1
1.0 Introduction....................................................................................................................... 3
2.0 Product Specifications ..................................................................................................... 4
2.1
2.2
2.3
2.4
2.5
Mechanical Dimensions................................................................................................................ 4
Pin Assignment and Description................................................................................................... 5
Performance ................................................................................................................................. 5
LED Functionality.......................................................................................................................... 5
Power Consumption ..................................................................................................................... 6
3.0 Theory of Operation ......................................................................................................... 7
3.1 Block Diagram .............................................................................................................................. 7
3.1.1 Controller Internal Components ................................................................................................ 7
3.1.2 Controller external components ................................................................................................ 8
3.2 Flash Management ....................................................................................................................... 8
3.2.1 Bad Block Management ............................................................................................................ 8
3.2.2 Wear Leveling ........................................................................................................................... 9
3.2.3 Error Correction/Detection ........................................................................................................ 9
3.3 OS Support ................................................................................................................................. 10
3.3.1 Using USB Flash Drive with XP Embedded ............................................................................ 10
3.4 Unique Serial Number ................................................................................................................ 11
4.0 Environmental Specifications .........................................................................................12
4.1
4.2
4.3
4.4
4.5
4.6
Recommended Operating Conditions ........................................................................................ 12
Reliability .................................................................................................................................... 12
Shock, Vibration, and Humidity .................................................................................................. 12
Electrostatic Discharge (ESD) .................................................................................................... 13
Mean Time Between Failure (MTBF) ......................................................................................... 13
Standards Compliance ............................................................................................................... 13
5.0 Electrical Specifications .................................................................................................14
5.1 Absolute Maximum Ratings ........................................................................................................ 14
5.2 DC Characteristics...................................................................................................................... 14
5.3 AC Characteristics ...................................................................................................................... 15
6.0 SCSI Command List ........................................................................................................16
7.0 Product Marking ..............................................................................................................17
7.1 Front Label ................................................................................................................................. 18
7.2 Back Label .................................................................................................................................. 19
8.0 Programmed Vendor and Product Names .....................................................................20
9.0 Contact Information.........................................................................................................21
9.1 STEC Worldwide Headquarters ................................................................................................. 21
9.2 STEC Worldwide Locations ........................................................................................................ 21
10.0 Revision History ..............................................................................................................22
61000-05387-118, October 2010
2
SLUFDxGU2U(I)
Datasheet
1.0
Industrial Grade USB Flash Drive
Introduction
This datasheet includes the following sections:
 Product Specifications covers the most referenced specifications, such as mechanical dimension,
signal description, and performance.
 Theory of Operation explains the Industrial Grade UFD block diagram and flash management features.
 Environmental Specifications characterizes the recommended operating conditions, reliability
parameters and shock, vibration and humidity parameters.
 Electrical Specifications describes the absolute maximum ratings and AC/DC characteristics.
 Product Marking describes the marking on the USB Flash Drive.
Figure 1: Industrial Grade USB Flash Drive
61000-05387-118, October 2010
3
SLUFDxGU2U(I)
Datasheet
Industrial Grade USB Flash Drive
2.0
Product Specifications
2.1
Mechanical Dimensions
Table 1 and Figure 2 show the mechanical dimensions of the Industrial Grade UFD with ESD-Rated
Enclosure.
Table 1: Mechanical dimension
Parameter
ESD-rated enclosure
Length with Cap
66.1 mm (2.602 in) Max
Width
16.60 ± 0.20 mm (0.654 ± 0.008 in)
Height
7.02 ± 0.20mm (0.276 ± 0.008 in)
Units: mm (in)
Figure 2: Mechanical dimensions-UFD ESD-Rated enclosure
61000-05387-118, October 2010
4
SLUFDxGU2U(I)
Datasheet
2.2
Industrial Grade USB Flash Drive
Pin Assignment and Description
Table 2: Pin Assignment and Description
2.3
Pin Number
Signal Name
Type
Description
1
VBUS
Power
Bus voltage supply
2
D-
I/O
Data line –
3
D+
I/O
Data line +
4
GND
Ground
Ground
Performance
The Industrial Grade UFD is USB 2.0 high-speed (480Mb/sec) and USB 1.1 full-speed (12Mb/sec)
compliant. Measured performance for high-speed can be found in Table 3.
Table 3: Read/Write Performance
2.4
Parameter
Value
Sustained Read
up to 30 MB/sec
Sustained Write
up to 20 MB/sec
LED Functionality
The Industrial Grade UFD with standard enclosure incorporates a LED activity indicator that functions as
described below:
 LED flashing: Industrial Grade UFD is transmitting/receiving data or is identification process
 Default LED colors: Blue
61000-05387-118, October 2010
5
SLUFDxGU2U(I)
Datasheet
2.5
Industrial Grade USB Flash Drive
Power Consumption
The power consumption currents listed in Table 4 are for reference only. Power consumption may change
according to flash memory used.
Table 4: Power Consumption
Power State
Symbol
Typ Power Consumption
(1 Flash Component)
Typ Power Consumption
(2 Flash Components)
Unit
Normal
INORMAL
66.00
67.03
mA
Suspend
ISUSPEND
0.38
0.39
mA
Sleep
ISLEEP
0.38
0.38
mA
Read
IREAD
91.08
104.12
mA
Write
IWRITE
93.88
118.74
mA
Table 5: Number of Flash Components
Capacity
Number of Flash Components
1GB
2
2GB
2
4GB
2
8GB
2
61000-05387-118, October 2010
6
SLUFDxGU2U(I)
Datasheet
3.0
Theory of Operation
3.1
Block Diagram
Industrial Grade USB Flash Drive
The Industrial Grade UFD uses STEC’s U2, state-of-the art, USB 2.0 controller, and is combined with SLC
NAND Flash for optimal device reliability. The controller’s firmware supports the latest NAND flash
technology from multiple vendors, and is optimized for the highest performance and reliability.
The USB controller consists of the functional blocks as shown in Figure 3. The blocks are described in the
paragraphs following the figure.
Figure 3: Controller block diagram
3.1.1 Controller Internal Components
 Microcontroller which serves as the hardware backbone for the flash controller algorithm.
 USB 2.0 Interface Controller with high speed (480 Mbps) device function. This block interfaces with the
host system via the USB interface.
 Flash Interface Controller that serves as the interface to the NAND flash components. It supports all
the major NAND flash memory manufacturers.
 Flash Storage Management Algorithm Block is responsible for the flash management, including wear
leveling, bad block management, and Error Correction.
 ECC block is responsible for on-the-fly error and correction.
 Sector Buffer for optimized performance.
 SRAM for running controller firmware fast and efficient.
 ROM for storing controllers boot code.
61000-05387-118, October 2010
7
SLUFDxGU2U(I)
Datasheet
Industrial Grade USB Flash Drive
3.1.2 Controller external components
In addition to the functional blocks shown in Figure 3, the Industrial Grade UFD has the following external
components:
 SLC NAND Flash for the most reliable data storage.
 Crystal Oscillator 12Mhz, as the main clock source.
3.2
Flash Management
Since the Industrial Grade UFD provides a standard USB interface to the host, no software integration is
required, providing the shortest time-to-market for design engineers.
The firmware of the embedded USB 2.0 controller contains STEC’s advanced flash memory management
algorithms to ensure the most optimum device performance, reliability and endurance. It was designed to
maximize the benefits of flash memory, while at the same time overcoming inherent NAND flash
limitations. Implemented in firmware are the below features:
 Flash file system management
 Bad-block management
 Wear-leveling
 Performance optimization
3.2.1 Bad Block Management
Inherent to NAND flash technology are areas (blocks) on the media that cannot be used for storage
because of their high error rate. These so-called “bad blocks” are already identified by the flash vendor
during manufacturing, but can also be accumulated over time during device operation.
The U2 controller contains a table that lists all the bad blocks on the device (Bad Block Table), and
automatically maps out these blocks upon system initialization. During device operation it ensures that
newly accumulated bad blocks are also mapped out and added to the Bad Block Table.
Bad block management is 100% transparent to the host application, which will not be aware of the location
or existence of bad blocks on the media.
61000-05387-118, October 2010
8
SLUFDxGU2U(I)
Datasheet
Industrial Grade USB Flash Drive
3.2.2 Wear Leveling
The SLC NAND flash devices that are being used in the USB Flash Drive are guaranteed for 100,000
Write/Erase cycles per block. This means that after approximately 100,000 erase cycles, the erase block
has a higher probability for errors than the error rate that is typical to the flash. While 100,000 write/erase
cycles may be good for consumer data storage, such as digital cameras, MP3 players, etc., it is not
sufficient for industrial and embedded applications where data is constantly written to the device and long
product life is required.
For example, operating systems that use a file system, will update the File Allocation Table (FAT) every
time a write is done to the device. Without any wear leveling in place, the area on the flash where the FAT
table is located would wear out faster than other areas, reducing the lifetime of the entire flash device.
To overcome this limitation, the flash management algorithm needs to make sure that each block in the
device ages, i.e. is “worn out”, at the same rate. The built-in wear leveling scheme makes sure that with
every write to the flash, the youngest block is used. This ensures that the full flash media is used
uniformly, so that one area of the flash will not reach the endurance limits prematurely before other areas.
3.2.3 Error Correction/Detection
The USB 2.0 controller implements an advanced Error Correction scheme, based on the BHC error
correct algorithm. The ECC engine can correct up to 6-bits per 512 bytes (symbol based). To ensure the
fastest performance, correction is done on-the-fly, in hardware only.
Each time the host application writes a sector of 512 bytes to the Industrial Grade UFD, a unique ECC
signature is created by the ECC engine and written together with the data to the flash. When the data is
read back by the host, the ECC engine creates again the unique ECC signature. It will then compare the
original written signature with the newly created signature, and sets an error flag if the two signatures are
not the same. Correction of the data is done on-the-fly when the error flag is set, and the data presented
to the host will be the same as the original written data. This powerful Error Correction scheme results in
14
an overall error rate of less than 1 in 10 bits, read.
61000-05387-118, October 2010
9
SLUFDxGU2U(I)
Datasheet
3.3
Industrial Grade USB Flash Drive
OS Support
The Industrial Grade UFD is recognized as a removable drive and supports the following Operating
Systems, as listed in Table 6.
Table 6: Supported Operating Systems
Operating System
Version
Windows 98/2000/XP/Vista
Windows XP Embedded
Service Pack 2007
Windows CE
4.2 and 5.0
Windows for POS (WEPOS)
VxWorks
6.1 and up
Linux
Kernel 2.4 and up
Note: Windows 98 requires driver.
3.3.1 Using USB Flash Drive with XP Embedded
When using USB Flash Disk Drive with Windows XP Embedded, it is recommended that the Enhanced
Write Filter (EWF) feature is implemented. The EWF intercepts calls at the sector level, and thereby
eliminates many file system updates/writes to the flash. Windows XP Embedded Service Pack 2 Feature
Pack 2007 introduced an additional write protect feature, called File Based Write Filter (FBWF). The new
FBWF function write-protects embedded devices at the file level, in contrast to the EWF, which has been
protecting devices at the sector level.
FBWF and EWF, combined with the built-in wear leveling algorithm, ensure that the maximum life span of
the flash device is achieved.
61000-05387-118, October 2010
10
SLUFDxGU2U(I)
Datasheet
3.4
Industrial Grade USB Flash Drive
Unique Serial Number
During manufacturing stage, a unique serial number is written to the USB Flash Disk that includes a date
code related to the time of manufacturing.
The serial number uses the following format: AA[B][C][DD][EE][FFFF][GGGG] Table 7 below describes
the parameters of the serial number.
Table 7: Unique Serial Number format
Symbol
Parameter
AA
Customer Code
B
Year (hex)
C
Month (hex)
DD
Day (hex)
EE
Production PC Number (hex)
FFFF
Last 2 Bytes of MAC Address
GGGG
Serial Number, Incremental (hex)
The Serial Number can be obtained through Windows Device Manager or Linux lsusb utility.
61000-05387-118, October 2010
11
SLUFDxGU2U(I)
Datasheet
Industrial Grade USB Flash Drive
4.0
Environmental Specifications
4.1
Recommended Operating Conditions
Table 8: Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Unit
Commercial Operating Temperature
TA
0
25
70
C
Extended Operating Temperature
TA
-15
-
85
C
Bus Voltage (5V)
VBUS(5V)
4.75
5.0
5.25
V
4.2
Reliability
Table 9: Reliability
Parameter
Value
Endurance
Guaranteed 2M program/erase cycles
Data reliability
4.3
1 in 10
14
bits, read
Data retention
10 years
Durability
1500 insertions/removals
Shock, Vibration, and Humidity
Table 10: Shock, Vibration & Humidity
Parameter
Value
Shock
1500G Peak, 0.5m pulse duration, 5 pulses, 6 axes
(per JESD22-B110)
Vibration
20G Peak, 20-2000 Hz, 4 cycles per direction (X, Y and Z)
(per JESD22-B103)
Humidity
85°C, 85% RH, Vmax for 500 hrs
(per JESD22-A101)
61000-05387-118, October 2010
12
SLUFDxGU2U(I)
Datasheet
4.4
Industrial Grade USB Flash Drive
Electrostatic Discharge (ESD)
The Industrial Grade UFD has been tested for immunity from ESD under the conditions described in Table
11.
Table 11: Electrostatic Discharge for UFD
4.5
ESD Type
ESD Rated Enclosure
(Maximum Discharge)
Contact
8KV
Air
15KV
Mean Time Between Failure (MTBF)
STEC estimates Mean Time Between Failure (MTBF), using a prediction methodology based on reliability
data for the individual components in the USB Flash Drive. Table 12 summarizes the prediction results for
the USB Flash Disk Drive, based on the following two methodologies:
 Telcordia Special Report SR-332, Reliability Prediction Procedure for Electronic Equipment.
 MIL-HNBK-217
The analysis was performed using Relex Software.
Table 12: USB Flash Drive MTBF
4.6
Product
Condition
MTBF (hours)
SLUFD4GU2U
Telcordia SR-332, GB, 25°C
MIL-HNBK-217
>4,000,000
SLUFD8GU2U
Telcordia SR-332, GB, 25°C
MIL-HNBK-217
>4,000,000
Standards Compliance
USB Flash Drive complies with the following standards:
 CE - EN 55022/55024
 FCC - Class B for Information Technology
 UL 60950
 RoHS-6
 USB 2.0 – Mass Storage Class
61000-05387-118, October 2010
13
SLUFDxGU2U(I)
Datasheet
Industrial Grade USB Flash Drive
5.0
Electrical Specifications
5.1
Absolute Maximum Ratings
Operation not guaranteed at extreme corner cases.
Table 13: Absolute Maximum Ratings
Parameter
Symbol
Value
Unit
Power Supply Voltage Relative to Ground
VBUS
-0.3 to 5.5V
V
Voltage on D+ and D- Relative to Ground
VDATA
-0.3 to 3.6
V
Ambient Operating Temperature (Commercial)
TA
0 to +70
C
Ambient Operating Temperature (Industrial)
TA
-15 to +85
C
Storage Temperature
Tstg
-15 to +85
C
5.2
DC Characteristics
Measurements at Recommended Operating Conditions, unless otherwise specified.
Table 14: DC Characteristics for Full-Speed Operation (TA=25ºC, Vdd=5V, Vss=0V)
Parameter
Symbol
Supply Voltage
Test conditions
Min
Typ
Max
Unit
VBUS
3.0
5
5.5
V
Input LOW Voltage
VIL
-
-
0.8
V
Input HIGH Voltage
VIH
2.0
-
-
V
Output LOW Voltage
VOL
RL of 1.5kΩ to
3.6V
-
-
0.3
V
Output HIGH Voltage
VOH
RL of 15kΩ to GND
2.8
-
3.6
V
Output Signal Crossover
Voltage
VCRS
1.3
-
2.0
V
61000-05387-118, October 2010
14
SLUFDxGU2U(I)
Datasheet
Industrial Grade USB Flash Drive
Table 15: DC Characteristics for High-Speed Operation (TA=25ºC, Vdd=5V, Vss=0V)
Min
Typ
Max
Unit
VBUS
3.0
5
5.5
V
High Speed Idle Level
VHSOI
-10
-
10
mV
High Speed Data
Signaling High
VHSOH
360
-
440
mV
High Speed Data
Signaling Low
VHSOL
-10
-
10
mV
Chirp J Level (differential
Voltage)
VCHIRPJ
0.7
-
1.1
V
Chirp K Level (differential
Voltage)
VCHIRPK
-0.9
-
-0.5
mV
5.3
Parameter
Symbol
Supply Voltage
Test conditions
AC Characteristics
Measurements at Recommended Operating Conditions, unless otherwise specified.
Table 16: AC Characteristics Full Speed
Parameter
Symbol
Min
Typ
Max
Unit
Rise Time
TFR
4
-
20
ns
Fall Time
TFF
4
-
20
ns
Differential Rise and Fall
Time Matching
TFRFM
90
111.11
%
Driver Output Resistance
ZDRV
28
44
Ω
-
Table 17: AC Characteristics High Speed
Parameter
Symbol
Min
Typ
Max
Unit
Rise Time (10%~90%)
THSR
500
-
-
ps
Fall Time (10%~90%)
THSF
500
-
-
ps
Driver Output Resistance
ZHSDRV
40.5
-
49.5
Ω
61000-05387-118, October 2010
15
SLUFDxGU2U(I)
Datasheet
6.0
Industrial Grade USB Flash Drive
SCSI Command List
Table 18: SCSI Command List
Command List
OpCode
RBC
SPC-2
SPC-3
INQUIRY
12h
√
√
√
MODESENSE(6)
1Ah
√
√
√
MODESENSE(10)
5Ah
-
√
√
PREVENT/ALLOW MEDIUM REMOVAL
1Eh
√
√
√
READ(10)
28h
√
-
-
READ CAPACITY
25h
√
-
-
REQUEST SENSE
03h
-
√
√
START STOP UNIT
1Bh
√
-
-
TEST UNIT READY
00h
√
√
√
WRITE(10)
2Ah
√
-
-
VERIFY(10)
2Fh
√
-
-
SYNC CACHE
35h
√
-
-
61000-05387-118, October 2010
16
SLUFDxGU2U(I)
Datasheet
7.0
Industrial Grade USB Flash Drive
Product Marking
USB Flash Drive will be shipped with standards compliance logos on the front label and the manufacturing
info on the back label, thereby providing the option for lot traceability and full access to the Bill of Material.
The back label of the USB Flash Drive shows the BOM Assembly Number. Refer to Table 19 to decode
manufacturing information the BOM Assembly Number.
The label specifications are shown in Figure 4 and Figure 5 in the pages that follow.
Table 19: BOM Assembly Number info
BOM Assembly Number
(Format: ppp00-0xxxx-yyzCU)
Description
ppp00
STEC designation for OEM Flash products
(ppp is 940 for standard, or customer prefix for custom)
0xxxx
PCB number
yy
Product Revision
z
Capacity Designator (Randomly assigned per PCB number based
on designator availability)
C
Commercial Operating Temperature
U
RoHS Compliant
61000-05387-118, October 2010
17
SLUFDxGU2U(I)
Datasheet
7.1
Industrial Grade USB Flash Drive
Front Label
Figure 4: Front Label
61000-05387-118, October 2010
18
SLUFDxGU2U(I)
Datasheet
7.2
Industrial Grade USB Flash Drive
Back Label
Figure 5: Back Label
61000-05387-118, October 2010
19
SLUFDxGU2U(I)
Datasheet
8.0
Industrial Grade USB Flash Drive
Programmed Vendor and Product Names
The USB Flash Drive can be manufactured with standard or customer-specific Vendor and Product
Names. Table 20 lists the STEC standard names for USB Flash Drive.
The names can be displayed by the OS, for example, Windows XP displays the names in the notifications
area in the right corner of the screen the first time the module is installed. Windows Device Manager and
the properties of the USB Flash Disk Module also can display the names
Table 20: STEC Standard USB Vendor and Product Names
Parameter
Value
Vendor Name
“STEC”
Product Name
“STEC USB 2.0”
61000-05387-118, October 2010
20
SLUFDxGU2U(I)
Datasheet
Industrial Grade USB Flash Drive
9.0
Contact Information
9.1
STEC Worldwide Headquarters
STEC INC
3001 Daimler Street
General Support:
1-949-476-1180
Santa Ana, California 92705
Fax Number:
1-949-476-1209
United States of America (USA)
E-mail:
oemsupport@stec-inc.com
9.2
STEC Worldwide Locations
STEC ITALY S. R. L.
STEC TAIWAN
STEC JAPAN G.K.
Via del Caravaggio, 3
RM1101, 11F, No. 495
Shinyurigaoka-City Building 4-402
20111 Milano
Guang-Fu S. Road
1-1-1, Manpukuji, Aso-ku, Kawaski-shi
Italy
Taipei
Kanagawa-ken 215-0004
Taiwan
Japan
Phone:
+39 02 497 56 213
Phone:
+886 2 8780 8000 Ext. 1101
Phone:
+81 44-959-2883
Fax:
+886 2 8725 7711
Fax:
+81 44-959-2887
STEC MALAYSIA
STEC CHINA
STEC Technology Sdn
RM1805, 18F Bund Centre
Plot 107 Bayan Lepas Industrial Park
222 Yan An Road East
Phase 4
HuangPu District Shanghai 200002
11900 Penang, Malaysia
P.R. China
Phone:
Phone:
+86 21 6132 3892 Ext. 629
Fax:
+86 21 6335 1336
+60 (4) 8887888
61000-05387-118, October 2010
21
SLUFDxGU2U(I)
Datasheet
Industrial Grade USB Flash Drive
10.0 Revision History
Revision
Date
Description
-101
10/24/2008
Preliminary initial release.
-102
12/03/2008
ECC Engine corrects 12 bits/512 bytes.
-103
12/09/2008
Length updated from 56.5mm to 64.5mm.
-104
12/12/2008
Endurance added to Features and Reliability table.
-105
12/22/2008
Serial Number definition updated. Bus Voltage corrected. Absolute Maximum
Ratings at extreme corners or not guaranteed. Product Name programmed into
device updated. Preliminary notice removed.
-106
01/09/2009
VBUS(3V3) removed from Recommended Operating Conditions.
-107
01/30/2009
Typo in Features, capacity corrected.
-108
02/06/2009
VBUS(5V) tolerance updated to 5%.
-109
02/23/2009
Linux utility to obtain Serial Number is corrected to lsusb.
-110
03/04/2009
Dimension illustration revised with tolerances.
-111
12/16/2009
Contact Information updated.
-112
01/22/2010
Decimal point error in body tolerance (Mechanical Dimenstions) corrected.
-113
01/28/2010
Extended Temperature added.
-114
01/29/2010
Missing dimension of USB connector added.
-115
06/07/2010
ECC corrects 6-bit with 2K/4K flash, and 12-bit with 8K flash.
-116
07/29/2010
Label details added.
-117
08/18/2010
Serial Number definition updated.
-118
10/21/2010
BOM Number decoder table corrected.
61000-05387-118, October 2010
22
SLUFDxGU2U(I)
Datasheet
Industrial Grade USB Flash Drive
DISCLAIMER OF LIABILITY
STEC™ Inc. reserves the right to make changes to specifications and product descriptions such as but not limited to numbers,
parameters and other technical information contained herein without notice. Please contact the STEC™ Inc. sales office to obtain
the latest specifications. STEC™ Inc. grants no warranty with respect to this datasheet, neither explicit or implied, and is not liable
for direct or indirect damages. Some states do not grant the exclusion of incidental damages and as such this statement may not
be valid in such states. The provisions of the datasheet do not convey to the purchaser of the device any license under any patent
rights or other intellectual property rights of STEC Inc. or others.
EXPORT ADMINISTRATION REGULATIONS
The information provided may be subject to United States Export Controls. Such information should not be downloaded or exported
(i), into (or to a national or resident of) Cuba, Iraq, Libya, North Korea, Iran, Syria, or any other country to which the United States
has embargoed goods; or given to (ii), anyone on the United States Treasury Department’s list of Specially Designated Nationals or
the U.S. Commerce Departments’s Table of Deny Orders. By using the information, you represent and warrant that you are not
located in, under the control of, or a national or resident of any such country or on any such list.
COPYRIGHT NOTICE
Copyright © 2010 by STEC™ Inc. All rights reserved. Information contained in this document, including but not limited to any
instructions, descriptions and product specifications, is considered proprietary and confidential to STEC™, Inc. and shall not be
modified, used, copied, reproduced or disclosed in whole or in part, in any form or by any means, electronic or mechanical, for any
purpose, without the written consent of STEC™ Inc
61000-05387-118, October 2010
23
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
STEC:
SLUFD8GU2U SLUFD4GU2UI SLUFD4GU2U SLUFD2GU2UI SLUFD1GU2UI SLUFD1GU2U SLUFD2GU2U
Download PDF
Similar pages