“Thomas” Corner TV/Media Stand MS967200TX White Finish

“Thomas” Corner TV/Media Stand
MS967200TX White Finish
MS977200TX Black Finish
MS987200TX Walnut Finish
MS997200TX Natural Oak Finish
Assembly Instructions
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
service@seidal.com
www.seidal.com
“Thomas” Corner TV/Media Stand
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware.
Using hardware that is too long will cause damage.
Before beginning assembly, separate each type of hardware. Carefully study the hardware
diagrams below. You may receive extra hardware with your unit
Quantity
Quantity B
A
of 1
of 1
Bottom Panel
Left Middle Panel
Quantity
Quantity
Quantity H
Right Door
Quantity
J
K
of 1
Back Panel
Quantity
Middle Shelf
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
of 1
Top Panel
Quantity M
L
of 1
Assembly Tool Required
No. 2 Phillips Screwdriver
(Not Included)
Quantity
I
of 1
of 1
Left Door
of 1
Right Side Panel
Left Side Panel
G
Quantity
F
of 1
of 1
Support Rail
of 1
Right Middle Panel
Quantity E
D
Quantity
C
of 1
Left Shelf
Quantity
of 1
Right Shelf
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Please call manufacturer for assistance,
questions or parts.
“Thomas” Corner TV/Media Stand
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware.
Using hardware that is too long will cause damage.
Before beginning assembly, separate each type of hardware. Carefully study the hardware
diagrams below. You may receive extra hardware with your unit
(1)
Quantity (2)
of 16
8mm x 30 mm
Wood Dowel
(3)
1/4” x 1-1/4” Bolt
Quantity (4)
of 1
Quantity (6)
of 16
3.5mm x 12 mm
Screw For Back
(7)
Quantity (8)
of 2
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
Assembly
Tool
Required
surface with
rough
or abrasive objects.
Assembly Tool Required
No. 2 Phillips Screwdriver
(Not Included)
Quantity
of 2
Metal Handle
5/32” x 22mm
Bolt For Handle
No. 2 Phillips Screwdriver
Quantity
of 2
3.5mm x 15 mm
Screw For Magnet
Magnet
(5)
Quantity
of 17
Quantity
of 12
Metal Pin
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Please call manufacturer for assistance,
questions or parts.
“Thomas” Corner TV/Media Stand
Assembly Instructions
Assembly Instructions:
Wood may scratch easily. Be careful
when assembling. Do not scratch.
Step 1. Unpack and lay parts on
clean, padded surface like
carpet or blanket. Check that
you have all parts indicated
on the front page.
Step 2. Insert the Wood Dowels(1) into
predrilled holes in Left Middle
Panel(B) and Right Middle
Panel(C).
Step 3. Attach Middle Panels(B,C) to the
Bottom Panel(A) with Bolt(2),
then fasten them.
Quantity
of 4
(1)
8mm x 30 mm
Wood Dowel
Quantity
of 4
(2)
1/4” x 1-1/4” Bolt
Figure 1
Step 1. Insert the Wood Dowels(1)
into predrilled holes in Left
Side Panel(E) and Right Side
Panel(F).
Step 2. Attach Side Panels(E,F) to the
Bottom Panel(A) with Bolt(2),
then fasten them.
Step 3. Attach Support Rail(D) to
the Middle Panels(B,C).
Quantity
of 4
(1)
8mm x 30 mm
Wood Dowel
Quantity
of 4
(2)
Figure 2
1/4” x 1-1/4” Bolt
“Thomas” Corner TV/Media Stand
Assembly Instructions
Step 1. Attach the Left Door(G) to the
Left Middle Panel(B) and Right
Door(H) to the Right Middle
Panel(C).
Figure 3
Step 1. Put the Top Panel (I) on the
soft working surface.
Step 2. Attach the Magnet(3) to the
Top Panel(I) with Screw For
Magnet(4), then fasten them.
Quantity
of 1
(3)
Magnet
Quantity
of 2
(4)
3.5mm x 15mm
Screw For Magnet
Figure 4
Step 1. Insert the Wood Dowels(1)
into predrilled holes in Middle
Panels(B,C) and Side
Panels(E,F).
Step 2. Attach Top Panel(I) to Middle
Panels(B,C), Side Panels(E,F)
and Support Rail(D) with
Bolt(2), then fasten them.
Quantity
of 8
(1)
8mm x 30 mm
Wood Dowel
Quantity
of 9
(2)
Figure 5
1/4” x 1-1/4” Bolt
“Thomas” Corner TV/Media Stand
Assembly Instructions
Step 1. Attach the Back Panel(J) as
pictured with Screw For
Back(5),then fasten them.
Quantity
of 16
(5)
3.5mm x 12 mm
Screw For Back
Figure 6
Step 1. Attach Handle(6) to
Doors(G,H) with Bolt For
Handle(7).
Step 2. Insert Metal Pins(8) to Middle
Panels(B,C) and side
Panels(E,F).
Step 3. Put the Shelves (K,L,M) above
the Metal Pins(8).
Quantity
of 2
(6)
Metal Handle
Quantity
of 2
(7)
5/32” x 22mm
Bolt For Handle
Quantity
of 12
(8)
Figure 7
Metal Pin
Parts Replacement Form
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No
Parts Letter
Parts Description
Quantity Needed
Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame. Parts will not be available for items arriving fully assembled. We do not
recommend modifying product(s) and we are not responsible for any damages due to product
modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are
under no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am 4pm Mon-Fri
Central time if you have product issues or email us at service@seidal.com. Please ask for customer
service representative for issues involving damages or replacement parts. Please ask for technical
assistance representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Service 1-800-633-5096
service@seidal.com
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas, 75019
CAUTION
The top shelf of this cabinet is intended for plasma/LCD televisions having a
maximum screen size of 44” and weight of 175 lb.
The top shelf is NOT INTENDED for tube televisions.
Each shelf should not be loaded with more than 20 lb.
DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the
maximum sizes and weights indicated may result in instability causing possible
injury.
This unit contains a permanent warning sticker located on under side of top shelf
or inside drawer.
Do not allow children under 16 years to move the cart.
Model: MS967200TX/MS977200TX/MS987200TX/MS997200TX
“Thomas” Corner TV/Media Stand
Southern Enterprises, Inc
600 Freeport Parkway,
Suite 200 Coppell, Texas, 75019
Manufacture Date: 25-12-2013
Download PDF
Similar pages