Safety Stations with Eyewash

Safety Stations with Eyewash
F
G1902P
Safety Station with Eyewash, Plastic Bowl
Application: Combination eyewash and shower safety
station. Two GS-Plus™ spray-type outlet heads deliver a flood
of water for rinsing eyes.
Shower Head: 10" diameter orange ABS plastic.
Shower Valve: 1" IPS chrome plated brass stay-open ball valve.
Valve is US-made with chrome plated brass ball and Teflon®
seals. Furnished with stainless steel actuating arm and 29"
stainless steel pull rod.
Spray Head Assembly: Two GS-Plus™ spray heads. Each head
has a “flip top” dust cover, internal flow control and filter to
remove impurities from water.
Eyewash Bowl: 11-1/2" ABS plastic.
Eyewash Valve: 1/2" IPS chrome plated brass stay-open
ball valve. Valve is US-made with chrome plated brass ball and
Teflon® seals.
Pipe and Fittings: Schedule 40 galvanized steel. Furnished
with orange polyethylene covers for vertical piping for high
visibility and corrosion resistance.
Supply: 1-1/4" NPT female top or side inlet.
Waste: 1-1/4" NPT female outlet. Outlet can be positioned at
either 9-1/4" or 19-5/8" above finished floor by reversing lower
pipe nipples.
Sign: Furnished with ANSI-compliant identification sign.
Quality Assurance: Valve and spray head assemblies are
factory assembled and water tested prior to shipment.
Available Options
F GC Powder coated finish on galvanized Pipe and Fittings:.
Available colors include orange, yellow, red and green.
F FC20 Regulates shower flow rate to 20 GPM.
F GRN Green ABS plastic shower head and bowl.
F YEL Yellow ABS plastic shower head and bowl.
F SSH Stainless steel shower head.
F AP275-100 Electric Light and Alarm Horn
Light and alarm horn summon assistance when eyewash
or shower is activated.
F AP250-015 Modesty Curtain
Modesty curtain for mounting on safety station.
F TMV G3800LF thermostatic mixing valve precisely blends
hot and cold water to deliver warm (tepid) water as
required by ANSI Z358.1-2014.
Guardian Equipment
1140 N North Branch St
Chicago, IL 60642
312 447 8100 telephone
312 447 8101 facsimile
gesafety.com
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
Safety Stations with Eyewash
F
G1902P
Safety Station with Eyewash, Plastic Bowl
5 3/4"
(146mm)
1" IPS CHROME PLATED
BRASS STAY-OPEN
BALL VALVE
24"
(610mm)
STAINLESS STEEL
ACTUATING ARM
1-1/4" NPT
FEMALE INLET
ABS PLASTIC
SHOWER HEAD
AND ELBOW
29"
(737mm)
Ø10"
(254mm)
23 1/2"
(597mm)
NOTES:
1. EACH GS-PLUS SPRAY HEAD
HAS A "FLIP-TOP" DUST
COVER, INTERNAL FLOW
CONTROL AND FILTER TO
REMOVE IMPURITIES FROM
THE WATER FLOW.
2. REVERSING THE TWO
LOWEST PIPE NIPPLES
RAISES THE DRAIN OUTLET
TO 19-5/8" A.F.F.
89"
(2261mm)
STAINLESS STEEL
PULL ROD
84"
(2134mm)
GALVANIZED STEEL
PIPE AND FITTINGS
64 3/4"
(2) GS-PLUS
SPRAY HEADS
11 3/4"
(299mm)
ABS PLASTIC
BOWL
6 1/2"
(165mm)
1-1/4" NPT
FEMALE INLET
(PLUGGED)
(1645mm)
1/2" IPS CHROME
PLATED BRASS STAYOPEN BALL VALVE
POWDER-COATED CAST
ALUMINUM FLAG HANDLE
5"
(127mm)
6"
(152mm)
DETAIL "A"
UNIVERSAL FLOOR FLANGE
9 1/4"
POWDER COATED
CAST ALUMINUM
FLOOR FLANGE
(SEE DETAIL "A")
37 1/2"
(953mm)
(235mm)
Ø7/16" MOUNTING SLOTS
ON 7-5/8" BOLT CIRCLE
9 1/4"
(235mm)
Ø9"
(229mm)
this space for architect/engineer approval
1-1/4" NPT
FEMALE OUTLET
Sign Included
Due to continuing product improvement, the information contained in this document
is subject to change without notice. All dimensions are ± 1/4" (6mm).
rev. 0615
Guardian Equipment
1140 N North Branch St
Chicago, IL 60642
312 447 8100 telephone
312 447 8101 facsimile
gesafety.com
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
Download PDF
Similar pages