LOADALL | 535-125/535-140 HiViz

LOADALL | 535-125/535-140 HiViz
MAX. PAYLOAD: 3.5 tonnes (7716lb)
MAX. LIFT HEIGHT: 12.3 metres (40ft 4in) and 13.8 metres (45ft 3in)
STATIC DIMENSIONS – 535-125 HiViz
STATIC DIMENSIONS – 535-140 HiViz
C
C
535-12
-125
5
535-14
-140
0
A
A
H
D
J
H
K
E
D
F
B
J
F
G
G
STATIC DIMENSIONS – 535-125 HiViz
Machine model
K
E
B
STATIC DIMENSIONS – 535-140 HiViz
535-125 HiViz
Machine model
535-140 HiViz
m (ft-in)
m (ft-in)
A Overall height
2.59 (8-6)
A Overall height
2.59 (8-6)
B
2.35 (7-9)
2.35 (7-9)
B
C Inside width of cab
Overall width (over tyres)*
0.94 (3-1)
C Inside width of cab
Overall width (over tyres)*
D Front track
1.90 (6-3)
D Front track
1.90 (6-3)
E
Wheelbase
2.75 (9-0)
E
Wheelbase
2.75 (9-0)
F
0.94 (3-1)
Overall length to front tyres
4.74 (15-7)
F
Overall length to front tyres
4.74 (15-7)
G Overall length to front carriage
5.80 (19-0)
G Overall length to front carriage
6.23 (20-5)
H Ground clearance
0.40 (1-4)
H Ground clearance
0.40 (1-4)
J
Front wheel centre to carriage
1.68 (5-6)
J
Front wheel centre to carriage
2.11 (6-11)
K
Rear wheel centre to rear face
1.37 (4-6)
K
Rear wheel centre to rear face
1.37 (4-6)
Overall width with stabilisers fully deployed
2.57 (8-5)
Overall width with stabilisers fully deployed
2.57 (8-5)
3.75 (12-4)
Outside turn radius (over tyres)
Outside turn radius (over tyres)
3.75 (12-4)
Carriage roll back angle @ ground level
degrees
37.0
Bucket roll back angle @ ground level
degrees
37
Carriage dump angle @ boom fully raised
degrees
12.5
Bucket dump angle @ boom fully raised
degrees
12.5
Weight
Tyres
*Dependant upon tyre specified.
kg (lb)
9720 (21429)
Weight
15.5/80-24
Tyres
*Dependant upon tyre specified.
kg (lb)
10880 (23986)
15.5/80-24
LOADALL | 535-125/535-140 HiViz
LIFT PERFORMANCE – STABILISERS EXTENDED – 535-125 HiViz
LIFT PERFORMANCE – STABILISERS RETRACTED – 535-125 HiViz
40
13
42
40
12
6m
38
36
36
6m
0kg
11
60°
5m
1,500kg
34
60°
11
12
38
70°
5m
10
50°
32
4m
34
10
30
3m
9
40°
8
16
20
16
2,000kg
5
2,000kg
6
1,500kg
5
1,000kg
4
1,500kg
3,000kg
12
20°
10
4
500kg
3
12
1,250kg
3
10°
8
0.5m
2
535-12
-125
0
0
0°
0°
0
-4°
2
1
10
9
32
2
10
9
32
30
535-12
-125
2
0
1
0.5m
200kg
1
1
2
2
4
1,150kg
4
10°
8
6
6
3,500kg
20°
14
14
10
1m
30°
18
6
2m
2,500kg
7
30°
18
8
24
1m
22
20
40°
22
2,500kg
7
26
2m
3,000kg
24
3m
9
28
3,500kg
28
26
4m
50°
32
30
8
28
26
7
24
6
22
20
5
18
4
16
14
3
12
10
2
8
1
6
4
30
8
28
0
7
24
6
22
20
5
18
4
16
14
3
12
10
2
8
1
6
4
0 Metres
2
0
Feet
Chassis Levelling (Sway)
With stabilisers retracted (Sway angle ±9°)
0 Metres
2
26
Feet
LIFT PERFORMANCE – STABILISERS EXTENDED – 535-125 HiViz
With Stabilisers Extended
LIFT PERFORMANCE – STABILISERS RETRACTED – 535-125 HiViz
With Stabilisers Retracted
Maximum lift capacity
kg (lb)
3500 (7716)
Maximum lift capacity
kg (lb)
3500 (7716)
Lift capacity to full height
kg (lb)
3500 (7716)
Lift capacity to full height
kg (lb)
1500 (3307)
Lift capacity at full reach
kg (lb)
1150 (2535)
Lift capacity at full reach
kg (lb)
m (ft-in)
12.28 (40-3)
Lift height
m (ft-in)
Lift height
200 (441)
12.07 (39-7)
Reach at maximum lift height
m (ft-in)
0.46 (1-6)
Reach at maximum lift height
m (ft-in)
1.36 (4-6)
Maximum forward reach
m (ft-in)
8.06 (26-5)
Maximum forward reach
m (ft-in)
8.10 (26-7)
Reach with 1 tonne load
m (ft-in)
8.06 (26-5)
Reach with 1 tonne load
m (ft-in)
5.31 (17-5)
Placing Height
m (ft-in)
11.75 (38-7)
Placing Height
m (ft-in)
11.43 (37-5)
Complies with stability test EN1459 annex B.
Complies with stability test EN1459 annex B.
LOADALL | 535-125/535-140 HiViz
LIFT PERFORMANCE – STABILISERS EXTENDED – 535-140 HiViz
LIFT PERFORMANCE – STABILISERS RETRACTED – 535-140 HiViz
14
46
14
44
40
60°
40
60°
6m
12
38
3,500kg
38
36
42
6m
12
5m
50°
11
36
3,500kg
32
3,000kg
3m
40°
9
30
2m
26
3,000kg
8
2,500kg
1m
30°
7
24
20
2,000kg
20°
16
20°
5
1,000kg
14
4
4
12
12
1,500kg
3
10
10°
0.5m
2
535-14
-140
1,250kg
4
500kg
3
200kg
8
8
6
0.5m
535-14
-140
1
2
2
0°
0
0
0°
0
-4°
2
2
1
10°
2
4
1
0
1,500kg
18
2,000kg
5
14
6
6
6
18
10
1m
30°
7
22
22
16
2m
2,500kg
8
24
3m
40°
9
28
28
20
4m
10
32
10
26
5m
50°
11
34
4m
34
30
7m
13
7m
13
42
70°
0kg
44
70°
11
10
36
34
9
32
30
8
28
26
7
24
6
22
20
5
18
4
16
14
3
12
10
2
8
1
6
4
1
0 Metres
2
0
11
Feet
10
32
9
32
30
8
28
26
7
24
6
22
20
5
18
4
16
14
3
12
10
2
8
1
6
4
0 Metres
2
0
Feet
Chassis Levelling (Sway)
With stabilisers retracted (Sway angle ±9°)
LIFT PERFORMANCE – STABILISERS EXTENDED – 535-140 HiViz
With Stabilisers Extended
LIFT PERFORMANCE – STABILISERS RETRACTED – 535-140 HiViz
With Stabilisers Retracted
Maximum lift capacity
kg (lb)
3500 (7716)
Maximum lift capacity
kg (lb)
3500 (7716)
Lift capacity to full height
kg (lb)
3000 (6614)
Lift capacity to full height
kg (lb)
1500 (3307)
Lift capacity at full reach
kg (lb)
1250 (2756)
Lift capacity at full reach
kg (lb)
Lift height
m (ft-in)
13.78 (45-2)
Lift height
m (ft-in)
Reach at maximum lift height
m (ft-in)
0.93 (3-0)
Reach at maximum lift height
m (ft-in)
1.94 (6-4)
Maximum forward reach
m (ft-in)
9.60 (31-6)
Maximum forward reach
m (ft-in)
9.70 (31-10)
Reach with 1 tonne load
m (ft-in)
9.60 (31-6)
Reach with 1 tonne load
m (ft-in)
6.61 (21-8)
Placing Height
m (ft-in)
13.30 (43-8)
Placing Height
m (ft-in)
13.02 (42-9)
Complies with stability test EN1459 Annex B.
Complies with stability test EN1459 Annex B.
200 (441)
13.47 (44-2)
LOADALL | 535-125/535-140 HiViz
ENGINE
BRAKES
Latest technology and advanced design provides low fuel consumption, reduced noise, high torque and power output,
total reliability and minimal maintenance. Two-stage, dry type air filter with primary and safety elements. Territory dependent.
Engine standard
Manufacturer
Displacement
ltr (in3)
No. of cylinders
Standard
Standard
Option
Option
Stage II
Stage III
Stage II
Stage III
JCB
JCB
JCB
JCB
4.4 (269)
4.4 (269)
4.4 (269)
4.4 (269)
4
4
4
4
Bore size
mm (in)
103 (4.05)
103 (4.05)
103 (4.05)
103 (4.05)
Stroke
mm (in)
132 (5.0)
132 (5.0)
132 (5.0)
132 (5.0)
Naturally aspirated
Turbo
Turbo
Turbocharged
Cooled
63 (85)
63 (85)
74.2 (100)
74.2 (100)
Aspiration
Service brakes: Servo assisted, hydraulically activated, self-adjusting, oil-immersed multi-disc type on front and rear axle.
Parking brake: Hand-operated disc brake on output of gearbox.
BOOM AND CARRIAGE
Boom is manufactured from high tensile steel.
Low-maintenance, hard-wearing pads.
JCB Q-fit self-levelling carriage with lever-operated pin locking accepts pallet forks and a wide range of attachments.
One boom end auxiliary hydraulic service fitted as standard.
Power rating
Power @ 2200rpm
kW (HP)
Torque rating
Torque @ 1200rpm
Nm (lbf ft)
320 (236)
362 (267)
–
–
Torque @ 1300rpm
Nm (lbf ft)
–
–
425 (313)
440 (324)
SAFETY CHECK VALVES
Fitted to carriage tilt, telescopic and boom lift rams.
TRANSMISSION
JCB Powershift transmission incorporating torque converter, bevel box and a 4-speed Powershift gearbox in one resiliently
mounted unit.
A combined steering column mounted switch incorporating directional control and 4 forward and 4 reverse Powershift gears.
Travel speed 29kph (18mph). Optional 33kph (20mph) transmission.
Front- and rear drive axles: JCB epicyclic hub reduction drive/steer axles with Max-Trac torque proportioning differentials.
Permanent 4 wheel drive.
SERVICE CAPACITIES
Fuel tank
litres (UK gal)
146 (32.1)
Hydraulic tank
litres (UK gal)
127 (27.9)
Coolant
litres (UK gal)
23 (5.1)
LOADALL | 535-125/535-140 HiViz
CAB
HYDRAULICS
Gear pump with suction strainer and filter.
535-125 HiViz
535-140 HiViz
bar (psi)
260 (3770)
260 (3770)
ltrs/min
110
110
Seconds
Seconds
Boom raise
10.4
13.5
Boom lower
8.1
11.0
Extend
15.7
15.6
Retract
12.8
14.4
Bucket dump
1.8
1.7
Bucket crowd
2.3
2.0
Operating system pressure
Pump flow
Hydraulic Cycle Times
Quiet, safe and comfortable cab conforms to ROPS ISO 3471 and FOPS ISO 3449. Tinted glass all round. Laminated roof screen.
Roof bars, front, rear and roof screen wash/wipe and heater/screen demister. Opening rear window. Audio-visual warning system
for coolant temperature, engine oil pressure, air cleaner, battery charge, transmission oil temperature and pressure, water in fuel.
Hourmeter and road-speed indicator. Engine temperature, fuel gauge, clock and inclinometer.
Mechanical joystick, direct-acting hydraulic control levers. Adjustable steer column with stalk bar Powershift change and forward
reverse shuttle. Throttle and brake pedal. Adjustable deluxe seat with adjacent park brake fitted.
Automatic, eye-level, audio-visual load moment indicator warning system receiving a signal from a load sensor on the rear axle.
This system continuously monitors the machine’s forward stability and leaves the operator in control at all times.
Optional indicator lamp to show when the stabilisers are on firm ground – Standard in EU territories.
Safety canopy as above but with side glass only (screen wiper and heater/screen demister not applicable).
STEERING
Hydrostatic power steering with power track rods on both axles.
Three steer mode options: front-wheel steer, all-wheel steer, crab steer. All operated from in the cab by a selection lever (Autosteer optional).
ELECTRICS
12 v negative earth. 95 AH battery. 95 amp alternator. Full road lighting. Reversing light. Direction indicators. Hazard warning.
Reverse alarm.
OPTIONS AND ACCESSORIES
Options: Front and rear working lights, rotating flashing beacon, fire extinguisher, traction and industrial tyres, electrical 2/4WD
select, windscreen and roof guard, air suspension seat, deluxe cab trim, roof and front screen blind, radio kit, air conditioning,
clearview carriage, sideshift, roof moulding, reversing fan.
Attachments: Contact your local dealer for details of the comprehensive range.
*Adaptive Load Control for EU territiories conforms to EN15000.
LOADALL | 535-125/535-140 HiViz
A GLOBAL COMMITMENT TO QUALITY
JCB’s total commitment to its products and customers has helped it grow from a one-man
business into Britain’s largest privately owned manufacturer of backhoe loaders, crawler excavators,
wheeled excavators, telescopic handlers, wheeled loaders, dump trucks, rough terrain fork lifts,
industrial fork lifts, mini/midi excavators, skid steer loaders, tractors and compaction equipment.
By making constant and massive investments in the latest production technology, the JCB factories
have become some of the most advanced in the world.
By leading the field in innovative research and design, extensive testing and stringent quality control,
JCB machines have become renowned all over the world for performance, value and reliability.
And with a global sales and service network of more than 650 dealers and agents, we aim to deliver
the best customer support in the industry.
Through setting the standards by which others are judged, JCB has become one of the world’s
most impressive success stories.
JCB Sales Limited, Rocester, Staffordshire ST14 5JP. Tel: 01889 590312. Fax: 01889 590588. Web: http://www.jcb.com
JCB reserves the right to change specifications without notice. Illustrations shown may include optional equipment and accessories. The JCB logo is a registered trademark of J C Bamford Excavators Ltd.
9999/5401 01/11 Issue 5
Download PDF
Similar pages