SAFETY IS OUR PRIORITY
MR3000C
Vibration & Motion Measurement System
The MR3000C in SYSCOM’s rugged RED BOX is a compact vibration/motion measurement
system. As such it meets all user expectation in a state-of-the-art device and thus is a highly
reliable and efficient tool for many applications.
Applications Civil Engineering
Industrial Vibrations - Construction Site Monitoring - Tunneling - Truck and Rail Traffic - Blasting Monitoring - Model Verification
Earthquake Engineering
Building Monitoring - Monitoring of Structures (Dams, Bridges..)
 Geology
Soil Characterization
Earth Science
Earthquake Monitoring (seismic Intensity)
Continuous data stream in MiniSeed/SeedLink format
MR3000C Vibration & Motion Measurement System
The MR3000C in SYSCOM’s rugged RED BOX is a compact vibration/motion measurement system. As such it meets all user expectation in a state-of-the-art device
and thus is a highly reliable and efficient tool for many applications.
Major features
Compact unit containing sensor,
digital recorder and communication
ARM/DSP Technology
Memory
Embedded Web Server for easy configuration and control
Precise timing (GPS)
Power over Ethernet (PoE)
Wide dynamic range
Wireless connectivity
Data acquisition
Principle 4th order delta-sigma ADC per channel
Resolution 24 bit
Sampling-rate 50, 100, 200, 400, 500, 800, 1’000, 2’000 sps, others on request
Number of channels 3
Channel to channel skew None – simultaneous sampling on all channels
Dynamic range Typ. 130dB@250, 127dB@500 sps
Data Filter FIR & IIR digital filters
Trigger Filter
Digital IIR filter: 0.5 - 15 Hz band-pass (Strong Motion Applications) Others on request
Trigger and de-trigger
Principle Level trigger or STA / LTA
Trigger voting logic
Predefined AND or OR combinations, individual channel votes
Level trigger 0.003 to 100% full scale
STA / LTA (Strong Motion)
STA: 0,1 to 25s, LTA: 1 to 250s, Ratio: 0,1 to 25.
Smart Trigger / De-Trigger
Automatic adjustment of trigger level
Microprocessor
Recording principle
Event recording (time history), continuous time recording or manually triggered Header Contains status information at time of trigger and event summary
Pre-event recording 1 - 30 seconds (in 1 sec steps)
Post-event recording 1 - 100 seconds (in 1 sec steps)
Max. recording time Event recording: unlimited
Non volatile Memory
Internal and flash and removable SD card
Alarm triggers
Principle Multiple level triggers with various notification options (individually settable for each axis)
Range 0.1 % to 100% full scale
Precision timing
System Clock
1 ppm, this clock is disciplined by GPS, NTP
Data/user interface Intelligent Alerting System initiates communications or sends text message (SMS) or e-mail when an event is detected
Web Interface
Easy to use command & control through embedded web server
FTP Built-in FTP client to push data to an FTP-server
Display
3 LED Run, Recording, Warning/Error
LCD-Display Status information, important settings.
Wireless Communication
WiFi
Mobile Network (option)
IEEE 802.11b/g/n compliant
Multi-Band UMTS / HSDPA / WCDMA / GSM / GPRS / EDGE
Power Supply
Supply Voltage Power Consumption
(W/O wireless communication)
9 - 13.5VDC or 48V PoE
2 W (velocitymeter)​
2.3 W (accelerometer)
I/O and Connectors MR3000C with GPRS
Type Power GPS
LAN / PoE
Metallic self-latching push-pull connectors with positioning key (LEMO)
Metallic connector with protective GND
Connector for external GPS
Communication with PC or network - Ethernet 100BaseT
Sensors (Internal)
Triaxial Velocitymeter
Type
Principle Measuring range full scale
Frequency range
Case-to-coil motion
Dynamic range
Linearity/Phase Cross axis sensitivity
Velocity sensor with linearized frequency response
A3HV 315/1 (triaxial) (according to DIN 45669)
Geophone
± 100 mm/s
1 - 350 Hz (linear ±10% frequency response)
4 mm p-p
> 130 dB
According to DIN 45669 (class 1)
According to DIN 45669 (<5%)
Triaxial Accelerometer
Principle
The sensing element is an analog force feedback accelerometer featuring a
variable capacitance, silicon bulk-micro machined acceleration sensor
(MEMS) and a custom low-power mixed-signal integrated circuit
(ASIC). The MEMS/ASIC custom design forms a DC coupled analog
servo accelerometer.
HysteresisNone
Dynamic range (100 Hz BW)
typ. 100 dB (±4g)
Noise (10 to 1000 Hz)
typ. 7 µgrms/√Hz
Frequency response
0 - 600 Hz
Measuring range
±4 g
Orientation
Triaxial, horizontal (floor) mounting or vertical (wall mounting)
Self testTest-pulse
Dimensions
Housing Weight Protection degree Aluminum, 120 x 180 x 100 mm
1.5 kg
IP 65 (splash-proof)
Regulation
Electrical Safety In compliance with IEC 61010
EMI/RFI In compliance with EN 61000
Environmental
Shock: 30 g/11 ms half-sine
Heat: -20° up to +70°C
Humidity: up to 100% RH
Vibration: up to 5 g (operating)
Conformity
Standard carrying case with cables,
MR3000C and batterypack
Ordering Information (please refer to last page)
Measurement System
Power supply
Mounting Platform
GPS timing Carrying case
MR3000C with internal Velocitymeter
MR3000C with internal Accelerometer External battery package with integrated AC/DC converter/charger
External AC/DC converter Mounting platform for MR3000C with levelling bubble
GPS receiver and antenna For MR3000C and battery package
SYSCOM Instruments SA
Rue de l’Industrie 21
1450 Sainte-Croix
SWITZERLAND
T. +41 (0) 24 455 44 11
F. +41 (0) 24 454 45 60
MR3000C with GPRS and
mounting plate
MR3000C-e//06.2016
www.bartec-syscom.com
info@bartec-syscom.com
All information in this brochure is ©SYSCOM instruments SA and is subject to modification without notice.
Ordering information
Description
Part number
MR3000C - 4GB Memory - 3 channels - WiFi - Ethernet connectivity - Embedded web server for configuration and control - 3m Ethernet cable
GPRS board
EU1/USA2
Battery pack3
with internal
AC/DC & cable4
to MR
External AC/DC
converter
Mounting
platform
Carrying
case
931000031
931000052
141000073
810005274
87000268
13000039
74710101
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
MR3000C main unit with internal triaxial velocity sensor
CE Basic Int Set (velocity)
93106007
CE Standard Set (velocity)
93106009
x
MR3000C main unit with connector for external sensors (without sensors)*
CE Basic Ext Set,
for external sensor
93106008
CE Classic Set,
for external sensor
93106010
x
* Refer to the datasheets of MS2003+ and MS2008+
MR3000C main unit with internal triaxial acceleration sensor
CE Basic Int Set (acceleration)
93106026
CE Standard Set (acceleration)
93106027
x
MR3000C units without accessories
MR3000C, with internal velocity sensor
14101007
MR3000C, with internal velocity sensor
and GPRS board
14101015
MR3000C, configured for external velocity
sensor, without sensor
14101019
MR3000C, configured for external velocity
sensor, with GPRS board, without sensor
14101005
MR3000C, with internal acceleration
sensor
14101018
MR3000C, with internal acceleration
sensor and GPRS board
14101017
MR3000C, network master firmware
option, for 1x MR3000C
88010003
x
x
x
x
x
x
All information in this brochure is ©SYSCOM instruments SA and is subject to modification without notice.
x
Download PDF
Similar pages