Technical
Specifications
Eaton 9PX UPS technical specifications (8 and 11 kVA models*)
Model overview
Catalog
Power rating
number
(VA/watts)
Input
208V output, 50/60 Hz bundles
9PX8KHW
8000/7200
Hardwired
9PX8K
8000/7200
Hardwired
9PX11KHW
11000/10000
Hardwired
9PX11K
11000/10000
Hardwired
120/208V output, 50/60 Hz bundles
Output
Dimensions
(HxWxD, in.)**
Weight
(lb.)
Hardwired
Hardwired, (3) L6-30R
Hardwired
Hardwired, (3) L6-30R
10.2 (6U) x 17.3 x 27.6
10.2 (6U) x 17.3 x 30.0
10.2 (6U) x 17.3 x 27.6
10.2 (6U) x 17.3 x 30.0
190
205
190
205
Hardwired, (2) L6-30R,
(18) 5-20R
15.3 (9U) x 17.3 x 30.0
Hardwired, (2) L6-30R,
9PX11KTF5
11000/10000
Hardwired
(18) 5-20R
15.3 (9U) x 17.3 x 30.0
Hardwired, (2) L14-30R,
9PX11KTF11
11000/10000
Hardwired
(8) 5-20R
15.3 (9U) x 17.3 x 27.6
**Each module of every 9PX bundle ships with a 4-post rail kit. ***Terminal block with L6-30P cord.
9PX8KTF5
8000/7200
Hardwired
Battery backup times (in minutes)****
Load
(watts)
Internal Batteries
+1 EBM
10000
3.0
10
7500
5.5
15
5000
10.0
25
2500
25.0
60
1000
74.0
159
+2 EBMs
18
25
42
97
237
+3 EBMs
25
37
61
136
341
+4 EBMs
34
48
80
163
461
300
300
377
+5 EBMs
42
61
98
184
541
****Runtimes are shown at full load with maximum power factor, are approximate and may vary with equipment, configuration,
battery age, temperature, etc. View interactive runtime graphs at www.eaton.com/9PX.
Additional specifications
General
Topology
Configuration
Color
Diagnostics
Warranty
Rail kit
Remote emergency power off
(REPO)
Contents (Ships with the
following items)
Electrical input
Input voltage range
Nominal voltage
Eaton.com/9PX
Double-conversion online
Rack/tower
Black and silver
Full system self test at power up
2 years
4-post rail kit and tower pedestals included
ROO and RPO: Rear deck emergency stop connectors (for remote on/off and power
off)
UPS
Network-MS Web/SNMP card
4-post rail kit
User manual
Quick start guide
Tower pedestals
Intelligent Power Software Suite CD
RS-232 serial cable
USB cable
Cable gland for hardwire connection
Phillips head screw driver
Full load: 176-276V, Derating: 100-276V
200/208/220/230/240V
TD153002EN
November 2012
Page 2 of 2
Default voltage
Frequency
Frequency range
Input power factor
Input current distortion
Electrical output
Power ratings 8 kVA
Power ratings 11 kVA
Nominal voltage
Output voltage regulation
Voltage THD
Power factor
Efficiency
Transfer time
Battery
Optional extended battery
module (EBM)
Maximum number of EBMs
Battery description
Battery management
Battery replacement
Start on battery
Communications
User interface
LEDs
Communication ports
Communications card slot
Power management software
Environmental & standards
RoHS compliance
Surge protection
Heat dissipation (BTU/hr;
battery full charged, resistive
load)
Audible noise
Operating temperature
Safety conformance
EMC markings
Storage temperature
Relative humidity
Altitude
NEMA: 208V. IEC: 230V
50/60 Hz
60 Hz: 50–70 Hz, 50 Hz: 40–60 Hz
>.99
<5%
200/208/220/230/240/250V: 8000 VA / 7200 watts
230/240V: 11000 VA / 10000 watts
220V: 11000 VA / 9900 watts
208V: 10000 VA / 9000 watts
200V: 10000 VA / 9000 watts
250V: 10000 VA / 9000 watts
208V default (200/208/220/230/240/250V)
±1% steady-state
<2% for linear loads
0.9+
94% with resistive load
0 ms
9PXEBM240RT
Add up to 5 EBMs with the UPS ; add up to 12 EBMs with SC240RT 240V super
charger module
Sealed, lead-acid; maintenance free
ABM technology; 3-stage charging extends battery service life by 50% and provides
advance warning for battery replacement
Hot-swappable internal batteries and extended battery modules (EBMs)
Cold-start enabled; first cold start is always forbidden
Graphical display. UPS status in a single view.
4 status-indicating LEDs
RS-232 (RJ45) ports; USB port as standard (HID). 6-foot RS-232 and USB cables
included
Network Card-MS included
Eaton Intelligent Power Software Suite CD (included)
Yes
IEEE ANSI C62.41 Cat B2
9PX8K: Online: 1570. Battery: 2140
9PX11K: Online: 1920. Battery: 2900
<45 dB at 1 meter
0 to 40°C (32°F to 104°F)
CE / cULus / NOM
IEC 62040-2:2006 Cat C2 / CISPR22 Class A / FCC part 15 Class A
0 to 35°C (32°F to 95°F); without batteries: -15 to 60°C (5°F to 140°F)
0 to 95% non-condensing
<1,000 meters for nominal power; 10% power derating every 1000 meters (up to
3000 meters) at 40°C
*Due to continuing product improvement programs, specifications are subject to change without notice.
Eaton.com/9PX
TD153002EN
November 2012
Download PDF
Similar pages