Adult assembly required. Small parts may present

Dream On Me Inc.
1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
OFFICE: 732-752-7220
CUSTOMER SERVICE: 732-366-1788
ASSEMBLY INSTRUCTIONS
ITEM NO: 655
Read all instructions before assembling crib.
Save instructions for future use.
Adult assembly required.
Small parts may present choking hazard prior to assembly.
Enclosed please find simple step-by-step instructions to help you
quickly assemble your products. Before you begin we recommend
that you following the steps below:
1. Please read the instructions thoroughly.
2. Identify all parts and hardware.s
3. You will need the following tools:
Philips head screw driver
Flat head screw driver Hammer
Do Not Use Power Drills or Drivers
To protect your parts during assembly please place them on a soft
surface.
To clean surface use only water on a damp cloth. Do not use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.
1
655
2
WARNING !
. Failure to follow these warnings and the in structions could result in serious injury or death.
. Read all instructions before assembling crib, keep instructions for future use.
. Upon completion of assembly be sure all screws, bolts and fastening devices have been
securely tightened. A frequent check should be made.
. Never use this product if there are any loose or missing fasteners, loose joints,broken
parts, or torn mesh/fabric. check before assembly and periodically during use.
Contact DREAM ON ME for replacement parts and instructional literature if needed.
. Never substitute parts, the product including side rails, must be fully erected prior to use.
.Discontinue use of the product when child is able to climb out or reaches the height of
35in (890mm).
. Never place product near window where cords from blinds or drapes can strangle a child.
.When child is able to pull to standing position,set mattress/base to lowest adjustment
positionand remove bumper pads, large toys ,and other objects that could serve as steps
for climbing out. A child can trap parts of the body or clothing on loose fasteners .
.Never use plastic shipping bag or other plastic film as mattress covers not sold and
intended for that purpose, they can cause suffocation .
. CAUTION: Any mattress used in this crib must be at least 27-1/4inches(690mm) by 51-5/8
inches(1310mm),with a thickness not exceeding 6 inches(150mm), the dimensions of the
mattress shall be taken from seam to seam or edge to edge where appropriate.
. Never use a water mattress with this product.
. Strings can cause strangulation! Never place items with a string around a child’s neck,
such as hood strings or pacifier cords. Never suspend strings over product or attach
strings to toys.
. Infants can suffocate in gaps between a mattress too small or too thick and product sides,
on soft bedding never add a mattress, pillow,comforter or padding.
. To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their
back to sleep, unless otherwise advised by your physician.
. If refinishing,use a non-toxic finish specified for children’s products.
. Infants can suffocate on soft bedding .
.Never add a pillow or comforter .
. Never place additional padding under an infant .
. To help prevent strangulation tighten all fasteners.
. A child can trap parts of the body or clothing on loose fasteners.
. Follow warnings on all products in a crib .
See head panel & mattress support of the product for warnings.
Replace teething rail if damaged,cracked or loose.
MADE IN CHINA
3
890
=
4
CONNECTION HARDWARE
a: 1-3/4”Allen head
bolt (12pcs)
b:Wood dowels (6pcs)
c:Allen wrench (1pc)
e:Barrel nuts (8 pcs) f: 3/4” Allen head bolt (4 pcs)
d:3” Allen head bolt (8 pcs)
Do Not Use Power Drills or Drivers
PARTS ENCLOSED IN CARTON
A: Left head board (1 pc)
B: Right head board (1 pc)
B4
A4
B1
A1
B3
A3
B2
A2
A1:Left back leg (1pc)
A2:Left front leg (1pc)
A3:Left board (1pc)
B1:Right back leg (1pc)
B2:Right front leg (1pc)
B3:Right board (1pc)
E: Back rail bottom (1 pc)
F: Front rail bottom (1 pc)
5
J
J:The bottom bar (1pc)
G: Mattress support (1 pc)
STEP 1
Attach left back leg (A1) and
left front leg (A2) to left board
(A3)(A4) using bolts (a) and
wood dowels(b).
Assemble right head board use
the same way .
A4
A1
A3
A2
STEP 2
B
E
A
Attach back rail bottom (E) to The right
head board (B) and The left head
board (A) using bolts(d),barrel nuts(e)
by allen wrench(c).
6
STEP 3
Locate the mattress support (G)
with tabs .
Be sure the smooth side of the
mattress support (G) is faced upward .
Position the tabs of the mattress
support(G) to mount to the selected
position onto the legs .
Insert the bolts (f) , through the
tabs and into thread inserts ,
then tighten securely with allen
wrench (c) .
STEP 4
Attach front
bottom rail (F) to The right head board
(B) and The left head board (A) using
bolts (d),barrel nuts (e) by allen
wrench (c) .
B
A
7
Converting crib to a toddler bed
(toddler rail and converting bolts are sold separately)
Please note that the warning sticker is placed on the cribs to keep parents and
caregivers informed it is a requirement by law under CPSC And ASTM.
We do apologize for any inconvenience this may cause you.
8
! WARNING
FOR TODDLER BED USE
Failure to follow these warning and the assembly instructions could result in
serious injury or death from entrapment or strangulation. DO NOT place
bed near windows where cords from blinds or drapes may strangle a child.
DO NOT place items witha string,cord,or ribbon around a child’s neck,such
as a hood, strings or pacifier cords. DO NOT suspend strings over a toddler
bed for any reason.
The mattress intended for use on the bed shall be a full-size crib mattress
having the dimensions of 51-5/8” (1310mm) in length and 27-1/4”(690mm) in
width and thickness of 4” (100mm) or a greater thickness as specified by the
manufacture. The minimum age of the intended user shall not be less than
15 months and the maximum weight shall not be greaterthan 50lbs(22.7kg).
5
9
Converting crib to a day bed
You have the option to convert crib to a day bed
1:Remove The front rail (F )
2:Install the mattress support (G)
in its lowest position.
3.To assemble the bottom bar (J ) to the
front legs as the image showed.
J
J
Model shown is example only.
Styles may vary .
Converting crib to a full size bed I
Conversion kit is sold separately
You have the option to convert
crib to a full size bed I
1:Use the front rail as the
footboard of full size bed I;
2:Use the back rail as the
headboard of full size bed I;
3:Connect the front rail and the
back rail to the keyslot bedframe
which are not included and sold
separately.
10
Converting crib to a full size bed II
Conversion kit is sold separately
You have the option to convert
crib to a full size bed II
1:Use the front rail as the
headboard of full size bed II;
2:Connect the front rail to the keyslot
bedframe which are not included
and sold separetely.
Converting crib to a Youth bed I
Conversion kit is sold separately
You have the option to convert
crib to a youth bed I
1:Use the right head board and left head
board as the headboard and footboard of
youth bed I;
2:Connect the right head board and the
left head board to the keyslot bedframe
which are not included and sold
separately.
Converting crib to a Youth bed II
Conversion kit is sold separately
You have the option to convert
crib to a youth bed II
1:Use the right head board as the
headboard of youth bed II;
2:Connect the right board to the
keyslot bedframe which are not
included and sold separately.
For youth bed,the youth mattress 29/75”
is sold separately.
Model shown is example only.
Styles may vary .
11
LIMITED WARRANTY
� Dream on Me warrants its product to be free from defects in material and
workmanship and agrees to remedy any such defect.
� This warranty covers 30 days from the date of original purchase.
� This warranty is valid only upon presentation of proof of purchase.
This is solely limited to the repair or replacement of defective furniture
components and no assembly labor is included.
� This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or
repaired in any way.
� This warranty gives you specific legal rights and you may also have other
rights which vary from State to State.
WARNING: Should this product become damaged, and/or components
are broken or missing, DO NOT USE
12
Download PDF
Similar pages