MULTI-PURPOSE Series
2 way passive loudspeaker system
Audio-Performance MP10
The MP10 is a compact two-way
passive system that employs a single
ND AP-10" low frequency driver
mounted in a B-6 type vented
enclosure. The high frequency unit is
a one inch ND driver coupled to a
40°/90°X60° AP asymmetrical horn.
The system incorporates a low loss
passive filter designed for flat
frequency response and optimal
phase alignment.
The cabinet is constructed of high
quality 15 & 18mm plywood and
finished with black epoxy paint. The
front steel grill can be removed
without any tools. Simply remove the
foam cover and put the grill out of its
sleeves by putting your finger in the
holes. To rotate the horn, simply
remove the bolts and put it in one of
the four positions. Note that the horn
carries a sticker showing the FOH and
stage monitor position.
The MP10 comes with a 35mm tube
adapter, two recessed L-track on the
top of the loudspeaker and one single
flying points at the back of the
cabinet for aiming.
Its multi-angle design allows you to
use the MP10 in a variety of
applications. By rotating the
asymmetrical horn, the MP10 can be
configured as front of house or as
stage monitor system.
The MP10 and Subs work together
with the P214D controller or the
AP2500 / AP5000 as a system. The
single rack-unit, dual channel
controller provides all the basic
functions to get the maximum
performance from the system.
Though the MP10 is passively
filtered, the controller provides active
protection for each individual driver
offering maximum clarity of the music
program, even at very high levels.
The AP2500 offers the same DSP
performances as the P214D plus 2x
1’250W to power up to 4x MP10 in
stereo mode.
IDEAL FOR
Front of house
or
Stage monitor
system
Touring
Concert halls
Clubs
Discotheques
Theatres
Special Features
Asymmetrical horn
High efficiency
Low distortion
Processor controlled
audio-performance
route de cossonay 36c
1040 echallens
switzerland
develpment & manufacturing of
professional loudspeaker system & electronics
phone : +41 21 886 1050 - fax : +41 21 886 1059
sales@audio-performance.com - www.audio-performance.com
MULTI-PURPOSE Series
MP10 Specifications
ACOUSTICAL
Frequency response (1)....................
Phase response ..............................
Max. peak SPL (2).............................
Coverage ........................................
55Hz - 18KHz
350Hz - 10Khz + / - 45°
130dB
Horizontal: 60°
Vertical: smoothly changing from 90° to 40°
Crossover Frequency ..................... 2KHz
Power handling .............................. 400W (AES) (4)
TRANSDUCERS
Low frequency ................................. 1 x 10 inch, neodymium, long excursion
High frequency ................................ 1 x 2 inch diaphragm, neodymium compression
driver, loaded with asymetrical horn
Nominal impedance .......................... 8 Ohms
2 x Neutrik Speakon, model
Connectors
NL4MP (wired in parallel)
1+: SP+, 1-: SP-, 2+, 2-: linked
MECHANICAL
Enclosure shape ..............................
Enclosure .........................................
Finish ..............................................
Dimensions (W x H x D) .................
Grill .................................................
Weight ............................................
Rigging ...........................................
Multipurpose FOH or Floor monitor
15 & 18mm plywood
Black epoxy painted
590 x 360 x 321mm
Removable perforated 1,6mm steel, foam cover
20Kg
Aircraft L-track fittings, side and rear
Low Profil Stage Monitor
The coverage pattern of the asymmetrical horn.
Vertically 60° and horizontally smoothly
changing from 90° to 40°
In the interest of improving the equipment, AUDIO-PERFORMANCE reserves the right to alter the specification without prior notice.
AP/pac/May 2008
Download PDF
Similar pages