DU-DX-0042-05 Top Plate for GE Carestation 620/650 Guide

3875 Cypress Drive Petaluma, CA 94954 • 800.228.2555 • +1.707.773.1100 • Fax 707.773.1180 • www.gcx.com
Top Plate for GE Carestation 620/650 Guide
The purpose of this guide is to:
Describe the installation of 10”/25.4cm Channel to top plate.
Describe the installation of Carestation 600 Series monitor mount to top plate.
Describe the installation of top plate to Carestation 620/650.
Parts Reference
The following parts and hardware are included in this installation kit:
Item #
Description
2
Qty.
1
Top Plate for Carestation 620/650
1
2
10”/25.4cm Channel
1
3
M5x10mm FHMS SS PHIL w/Patch
4
4
M6x30mm FHMS SS PHIL w/Patch
4
5
.375” Round Blank Label, Silver
9
1
5
Tools Required:
 Phillips Screwdriver (Not provided)
 5mm Hex Wrench (Not provided)
DU-DX-0042-05 Rev A 05/08/2017 GCX Corp. Page 1 of 6
1
OR
DU-DX-0042-05 Rev A 05/08/2017 GCX Corp. Page 2 of 6
2
a
b
3
After installation, cover
any unused holes with
silver labels (supplied).
DU-DX-0042-05 Rev A 05/08/2017 GCX Corp. Page 3 of 6
Carestation 600 Series Monitor Mount (Optional Accessory)
1
OR
(3) M4x16mm PHMS
(supplied with monitor mount kit)
DU-DX-0042-05 Rev A 05/08/2017 GCX Corp. Page 4 of 6
2
Tilt Adjustment
Swivel Adjustment
DU-DX-0042-05 Rev A 05/08/2017 GCX Corp. Page 5 of 6
Routine Maintenance
Periodically inspect all fasteners associated with the mounting assembly. Tighten or Adjust as
necessary for optimal operation and safety.
Cleaning the Mounting Assembly
The mounting assembly may be cleaned with most mild, non-abrasive solutions commonly used in the
hospital environment (e.g. diluted bleach, ammonia, or alcohol solutions).
The surface finish will be permanently damaged by strong chemicals and solvents such as acetone
or trichloroethylene.
Steel wool or other abrasive material should never be used.
Damaged caused by the use of unapproved substances or processes will not be warranted. We
recommend testing of any cleaning solution on a small area of the mounting assembly that is not
visible to verify compatibility.
Never submerge or allow liquids to enter the mounting assembly. Wipe any cleaning agents off
the mounting assembly immediately using a water-dampened cloth. Dry the assembly thoroughly after
cleaning.
CAUTION: GCX makes no claims regarding the efficacy of the listed chemicals or processes as a
means for controlling infection. Consult your hospital’s infection control officer or epidemiologist. To
clean or sterilize mounted devices or accessory equipment, refer to the specific instructions delivered
with those products.
DU-DX-0042-05 Rev A 05/08/2017 GCX Corp. Page 6 of 6
Download PDF
Similar pages