Brush Chipper Model C40 Model C40 Brush Chipper will process branch and brushy material up to 178mm in diameter. The draft action of the rotor will blow the chips into any size truck or stockpile on the ground. With the 360° rotating outlet chute the discharge direction can be changed within seconds. FEATURES The powerful hydraulic feed system makes it easy to process any material. The 13” wide feed opening means bushy, twisted branches with forks are pulled into the machine without effort. You simply control the feedrate with the control bar and the rest is automatic. Wide infeed opening – 330 x 178mm (13” x 7”). Excellent for foliage, brushy material and forked branches, reducing the number of saw cuts required. Compact size yet efficient – low weight (1160kg), and easy to maneuver. Auto feed controller – monitors engine RPM and controls feed to suit. Operator adjustable by touch button. Auto reversing for quicker engine recovery. Feedroller jams are reversed and cleared automatically. Quality engine – great access for engine servicing – unhitch two rubber latches and engine cover pivots forward. Feed table – folds away and is locked when transporting the machine or when in operation. Pivot & Swivel Outlet – adjustable deflector & 360 degree pivoting outlet chute. Pivot outlet vertically by 250mm. Positive locking, no tools required for adjustments. Quality construction – made of steel, CNC lasercut & folded – 100% accurate, durable hyperloc powder coated finish (Hansa green or optional colour of your choice). Hydraulic feed – quality hydraulic components, tidy design, in-feed speed is infinitely variable. The best chippers for any application. Brush Chipper Model C40 Light system – LED tail, brake and license plate lights, suitable for 12 or 24 volt system. Quality output – chip size 10 – 20mm, great for use as a ground cover / mulch. Vertical anvil – stones and grit fall between the end of the inlet and the blades resulting in reduced knife damage. Blade access – loosen one bolt, pivot open the housing cover exposing the blades, adjustable to anvil after sharpening. Feed roller – strong tension springs, pivot type feed-roller, operates with less friction, up to within 90mm of knives. Simple controls – keystart, control panel with warning lights, manual throttle control, LCD screen displays engine RPM & hour meter. SPECIFICATIONS Engine General Capacities Chassis Cutting System Feed System Discharge System Brakes Make & model 42HP Kohler Air Cooled Type of fuel Diesel Length 3555mm Width 1575mm Height 2060mm (minimum) Weight 1160kg Fuel tank 45L Hydraulic oil tank 24L Frame description 100 x 50mm RHS Wheels 13” wheels Disk speed 1800RPM Disk diameter 650mm x 25mm Shaft diameter 50mm Knives Two Feed opening 330 x 178mm / 13” x 7” Chipping capacity 178mm / 7” Feed table height 750mm Feed table length (to feed rollers) 1550mm Infeed chute opening 960 x 650mm Roller Style Single roller, spring mounted, 220mm / 8.7” diameter Feed Speed Range 0 - 40m/min / 0 - 135fpm infinitely variable, full reverse Discharge Height 2060mm–2200mm (adjustable) Degree of Rotation 360° Road brakes Hydraulic road brakes with handbrake standard Please contact us for details if you are looking for a larger or smaller model. Visit our website for our full product range and videos of the machines in action. MANUFACTURED BY: Hansa Products Ltd - 36 Tawn Place, PO Box 10323, Hamilton 3200, New Zealand freephone 0508 4 HANSA (0508 442 672) phone 07 849 4749 fax 07 849 4746 email email@example.com www.hansaproducts.co.nz The best chippers for any application. Copyright © Hansa Products Ltd, 2016. All rights reserved. Hansa Products has a policy of continuous improvement, therefore specifications may change without notice. All products come with a 12 month warranty, conditions apply.