HX-EP320
32
USER GUIDE AND
WARRANTY INFORMATION
11
HEY THERE!
Thank you for purchasing
the JAM TRANSIT EVO
BUDS. Check out the
sections below for all the
important information
about your new earbuds.
WE’RE HERE TO HELP. CONTACT US!
You’ve got questions? We’ve got answers.
Contact a Consumer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-EP320)
Register your earbuds! Information about where
you bought it and how you’re using it is like
gold for the people who make these earbuds.
USA
cservice@jamaudio.com
1.888.802.0040
8:30am–7:00pm EST M–F
CANADA
cservice@homedicsgroup.ca
1.888.225.7378
8:30am–5:00pm EST M–F
www.jamaudio.com/customer-support/product-registration
17
JUST CHARGE IT
Charging the earbuds is so easy you’ve probably figured it out by now, but in case you’ve got two options, you can charge it using
your computer or a wall outlet. The Transit Evo Buds need about 2.5 hours for up to 7 hours of play time.
1. The cord that came with the earbuds — the
one with the USB on one end and the micro
USB on the other — will work with your
computer.
2. If you want to use the wall outlet, you’ll need
to pick up a power cord with a micro USB the
next time you’re at the store, or use any USB AC
adapter, including the one for your cell.
2.5h
or
AC adapter not included.
SHED SOME LIGHT
CONTROL YOUR DESTINY…OR AT LEAST YOUR EARBUDS
The LED light on your earbuds let you
know what they’re doing.
1. Play/Pause, press and hold for 3 seconds to
power on
2. Volume down/ Previous Track
3. Volume up/ Next Track
4. Power cord goes here
5. Shed some light on what your earbuds are doing
(see chart to left for details).
Pairing Mode
Charging
Connected
Ready
4
3
5
1
2
Low Battery
BLUETOOTH CONNECTION — IT’S A SETUP
®
Like any amazing couple, this one starts with a connection — one between
your device and the earbud’s Bluetooth. Here’s how it works:
1. Make sure the smartphone, tablet, or computer you’re using with the
earbuds has Bluetooth.
2. Turn on the earbuds and look for the little blinking light.
3. Do whatever your device needs you to do on its end.
4. Look for Jam Transit Evo Buds in your device’s Bluetooth list or click YES.
5. Now hit PLAY on your earbuds and crank it up — or down if you’re lame.
The device and Bluetooth will find each other every time, as long as the
earbuds are set to Bluetooth and your device’s Bluetooth is, you know, on.
Bluetooth
®
Devices
JAM Transit Evo Buds
3s
on
>
If you’re connecting to a computer, you may have some extra steps on that end. You’ll
have to get that information from the computer company.
Depending on your device, you may be prompted to enter a pairing code. If prompted,
enter “0000” as the code.
To disable pairing of an existing device and pair a new device, press and hold the
play/pause button for 3 seconds to activate pairing mode.
Note: If you turn on your Transit Evo Buds but haven’t started the party yet, it will
automatically power off after 2 minutes of unpaired inactivity.
2m
COMING CLEAN
LITTLE BIT OF SWEAT? NO WORRIES.
A soft, dry towel is all you need to
clean off your earbuds. Using water,
harsh cleaners, or anything else only
starts messing with the mechanics
inside. So, yeah, don’t do it. Remember
to keep the top flap flush with the
earbuds for the best protection.
Working out? Not a problem. These earbuds are totally sweat resistant! The smart
folks who made these earbuds designed them to keep the party going through just
about any activity (they call it IPX4) But those designers aren't miracle workers.
Doing somethng like going for a swim in the deep end while wearing your earbuds
will eventually fill those holes you need for incredible sound with water. Remember
to keep the top flap flush with the earbuds for the best protection.
LOOK MA, NO HANDS!
When friends call to interrupt your party of one – and you know they will – answer the phone without disconnecting from your
JAM Transit Evo Buds. Yes, that’s right. Your earbuds have hands-free calling too. How amazing is that? Here’s how it works:
1. Make sure your phone and earbuds are connected through Bluetooth.
2. Answering and ending a call works the same way: simply click the PLAY/PAUSE button on your Transit Evo Buds.
3. If you’d rather not talk, hold down the PLAY/PAUSE button on your Transit Evo Buds for 3 seconds to ignore the call.
THE COOLEST PART: The Transit Evo Buds know when a call is coming in and pause the music before ringing. When you hang up,
the music starts where it left off – and so does the party. If it’s you making the call, just start dialing from your phone, and the Evo
Buds automatically do their hands-free thing. Isn’t it refreshing to know your earbuds get you?
Check out the chart below for a complete guide on handling calls with your Transit Evo Buds.
Situation
Short Press Play/Pause Button
Long Press Play/Pause Button
1 Incoming call
On call
Pick up call
Reject call
End call
Move call from earbuds to device
2 Incoming call
Both calls Active
Call 1 on Hold, Pick-Up call 2
Reject call 2
Hang up call 1, Switch to call 2
Switch between 1st call and 2nd call
st
nd
1 YEAR LIMITED WARRANTY
For detailed Warranty Instructions and Information visit:
USA: www.jamaudio.com/customer-support/warranty-1yr
CAN: http://canada.jamaudio.com/warranty-1yr
To obtain warranty service on your JAM product, contact a
Consumer Relations Representative by telephone or email for
assistance (You can find their contact info on page 1). Please
make sure to have the model number of the product available.
STUFF THE GOVERNMENT MAKES US SAY
STUFF OUR LAWYERS MAKE US SAY
FCC Compliance:
Note: This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by HMDX
could void the user's authority to operate this equipment.
IMPORTANT SAFEGUARDS:
When using an electrical product, basic precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
• WARNING: Listen responsibly. To avoid hearing damage, make
sure the volume on your device is turned down before connecting
earbuds. After placing earbuds in your ears, gradually turn up the
volume until you reach a comfortable listening volume.
• Use this product only for its intended use as described in this
manual. Do not use attachments not recommended by HMDX.
• HMDX is not liable for any damage caused to smartphones,
iPod/MP3 players, or any other device.
• Do not place or store this product where it can fall or be dropped
into a tub or sink.
• Do not place or drop into water or any other liquid.
• Not for use by children. THIS IS NOT A TOY.
• Never operate this product if it has a damaged cord, plug, cable,
or housing.
• Keep away from heated surfaces.
• Only set on dry surfaces. Do not place on surface wet from water or
cleaning solvents.
IC Caution: RSS-GEN Issue 4 December 2014
This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions: (1) This device
may not cause interference, and (2) This device must accept any
interference, including interference that may cause undesired
operation of the device.
Attention California Residents:
WARNING: This product contains chemicals known to the State
of California to cause cancer, birth defects, and other
reproductive harm.
The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by HMDX is
under license.
A MESSAGE FROM THE ENVIRONMENT
WARNING:
This product has an internal, non-replaceable lithium battery. Please
dispose in accordance with your local, state, province, and country
guidelines.
This product contains small parts that may present a choking hazard
for young children.
CAUTION: All servicing of this product must be performed by
authorized HMDX Service Personnel only.
©2017 HMDX. All Rights Reserved.
IB-HXEP320
BC
Download PDF
Similar pages