Model DHH805 Handheld communicator HART fieldbus tools

Data Sheet DS/DHH805-EN-C
Model DHH805
Handheld communicator
HART fieldbus tools
Handheld configuration devices
Handheld terminal
—Configuration, commissioning and maintenance operations for HART® devices
Supported devices
— All ABB measurement products devices as well as
all third party devices (optional license)
Extensive memory
—SD card to store more than 2000 HART device profiles as well as 1000 configurations
Supported HART commands
—Universal, Common Practice and Device Specific
Time saving engineering
—Clone/upload/download configurations
Remote configuration
—Off-line mode for developing/reviewing configuration
User Interface
—Simple, easy-to-read dot matrix graphic display backlight
Product in compliance with Directive 2011/65/UE (RoHS II)
Model DHH805
Hand-held communicator
General description
As part of ABB’s Mobility line of device handhelds, the
DHH805 is a handheld terminal for device configuration of
HART® instruments. It interfaces to a wide range of devices
supporting ABB instruments with an option to support those
from third party suppliers. All supported HART field devices
can be configured, polled and trimmed using the Mobility
DHH805. As a full function HART communicator, the Mobility
DHH805 supports Universal, Common Practice, and Device
Specific commands for commissioning, configuration, and
maintenance operations. The Mobility DHH805 provides a full
view of information in a graphic dot matrix display. It’s easy to
navigate parameter scrolling capability eliminates the need to
memorize menus for online or offline device configuration.
The Mobility DHH805 is designed for optimum convenience
and usability. It’s sleek, easy to grasp contour with thumb key
access makes the Mobility DHH805 suitable for single-handed
operation
Design features
The Mobility DHH805 supports all HART devices at the Universal and Common Practice command levels plus all the
ABB and non-ABB devices at the Device Specific command.
Every Mobility DHH805 comes with a lifetime subscription
allowing users to keep up-to date with the latest device revisions/definitions for an extended time.
Devices Updates (updated EDDs) can be directly downloaded
from the HART foundation website,
The Mobility DHH805 supports many transmitter types including Analytical, Flow, Level, Pressure, and Temperature.
2 DS/DHH805-EN Rev. C | Handheld communicator model DHH805
Device capability
—Update new device profiles and firmware via Internet connection
—Dedicated memory for more than 2000 HART device profiles
—Document and store more than 1000 device configurations
—Clone / Upload / Download configurations
—Off-line mode for developing / reviewing configurations
—Upload and document device configurations with DHH Tool
—6 lines dot matrix graphic backlit display
—Edit directly from Review/Edit mode
—HART menu Home key
—Programmable lock-out settings
—Contrast adjustment
—Elastic hand strap and adjustable, detachable hanging strap
—Custom “use-in-place” soft case with lead kit compartment
Use cases
The Mobility DHH805 supports a wide range of functions that
can help to reduce costs by saving time in start-up, day-today operations, and maintenance activities. It powers up
quickly, typically in less than 2 seconds, and it easily connects
with device terminals and/or wiring, making it readily available
to begin configuration and/or troubleshooting.
On power-up, the Mobility DHH805 searches for a connected
device, and upon finding it, the DHH805 display identifies
the device and reveals a wealth of information about the
device in display area including the device’s key variables and
status.
The large 1000-device memory capacity allows the Mobility
DHH805 to be used in the field for long periods of time
without having to return back to upload it’s saved data.
The Mobility DHH805 includes a Review/Edit function that
allows a user to scroll online or offline through every HART
accessible parameter without having to memorize varying
menu structures from different instrument suppliers. This time
saving feature along with thumb key access and the Mobility
DHH805’s ergonomic design that allows it to comfortably fit in
your hand, makes single-handed operation in any location,
including hard-to-access places, the often preferred method
of use.
DHH805 PC-Tool
DHH805 PC-Tool software provides an intuitive interface for
DHH805 HART® handheld terminal management.
This tool allows users to upload DD files massively and store
device configurations. DHH805 activation and license upgrade
can be performed by the users in few minutes.
DHH805 PC-Tool automatically detects software as well as
device firmware updates availability.
Everything’s needed comes along with DHH805 and it’s for
free.
Below are some of the typical ways that the Mobility DHH805
can be used.
Devices commissioning
— Step-by-step configuration
— Document as-left configuration
— Electronic Birth Certificate
Operations
— Reconfiguration for process changes
— Reconfiguration for batch runs
— Document as-found and as-left configurations
Device Maintenance
— Troubleshoot devices with HART
— View device error messages
— Clone devices to commission replacements
— Preventive review of device status
Handheld communicator model DHH805 | DS/DHH805-EN Rev. C 3
Model DHH805
Hand-held communicator
Functional specifications
Physical specifications
Memory
8 GB memory card (SD)
Materials
Case
Glass fiber reinforced, flame resistant, anti-static PA6 nylon
compound
Keyboard
Polyester
Protective shell
Silicone rubber
Carrying bag
Anti-static polyester
Power supply
— Four type AA 1.5 V disposable alkaline batteries (provided).
— Rechargeable Ni-MH battery sealed pack (provided).
Countinuous run time
— 100 hours approx without backlit
— 60 hours approx with minimum backlit
— Programmable auto power-off.
Operative limits
Temperature limits:
Ambient
is the operating temperature
–10 and +70 °C (+14 and +158 °F)
Storage
–20 and +70 °C (–4 and +158 °F)
With rechargeableI battery pack temperature must not exceed
55 °C (131 °F)
Environmental limits
Humidity
Relative humidity: up to 100 %.
Condensing, icing: admissible
Hazardous atmospheres
INTRINSIC SAFETY
ATEX Europe approval: II 1 G Ex ia IIC T4 Ga
Keypad
single sheet molded dome switches with tactile feedback with
— 4 keys for navigation
— 7 single function keys for editing and operation
— 12 multifunction keys for alphanumeric and symbols
Display
Wide screen LCD, 128 x 64 pixel,
52.5 x 27.2 mm (2.06 x 1.07 in.) dot matrix.
Connections
—to the transmitter: 2 standard banana jacks,
suitable for 1.5 m (5 ft) leadset with insulated minigrabbers and alligator clips (provided).
—to the PC: USB port (type B) suitable for cable (provided), to allow software and DD upgarde and to use the DHH805 in modem functionality.
—to the battery recharger: 5 mm dia. socket with inner pin
as positive pole.
Weight (without accessories)
0.95 kg approx (2 lb)
Add 450g (1 lb) for carrying case.
IEC Ex approval: Ex ia IIC T4 Ga
NEPSI China (PENDING): Ex ia IIC T4
FM Approvals US
Packing
Carton including all accessories and documentation.
— Nonincendive: Class I, Div. 2, Gr. A, B, C, D, T4
— Intrinsically safe: Class I, Div. 1, Gr. A, B, C, D, T4
Class I, Zone 0, AEx ia IIC T4
Class I, Zone 2, IIC T4
FM Approvals Canada: Class I, Zone 0, AEx ia IIC T4
—GOST (Russia, Kazakhstan, Belarus), Inmetro (Brazil) based on ATEX
Refer to certificate for ambient temperature range (within the
limit of -10 to 50°C) related to the different equipment
operations (for example the charging).
4 DS/DHH805-EN Rev. C | Handheld communicator model DHH805
Standard delivery items
DHH805A is delivered in a hard plastic case including
— battery assemblies (rechargeable and disposable versions)
— power adapter/battery recharger with universal plugs
— elastic handle strap and rubber shell
— USB cable and leadset to the transmitter with minigrabbers
— soft carry bag with adjustable shoulder strap
— DVD with PC-Tool software and HART DD library
Mounting dimensions
Not for construction unless certified
41 (1.61)
66 (2.59)
Dimensions in mm (in.)
216 (8.52)
119 (4.69)
94 (3.70)
Handheld communicator model DHH805 | DS/DHH805-EN Rev. C 5
Model DHH805
Hand-held communicator
Electrical connections
2
1
3
1 Banana plugs for transmitter connection | 2 USB 2.0 port | 3 Battery charger connection
HART handheld communicator may be connected at any wiring termination point in the loop, providing the minimum
resistance is 250 ohm. If this is less than 250 ohm, additional resistance should be added to allow communications.
-
0
2
3
0
7
6
5
20
8
60
40
%
Kent-Taylor
9
80
10
5
M+
10
0
1 2
-
+
+
2
4
7
+
+
6
-
-
4
691HT
1
F1
F2
F3
F4
PV
REVIE W
CONF
SERIAL
LINK
TRI M
A B C
D E F
G H I
J K L
M N O
P Q R
S T U
V W X
Y Z #
@ %
& /
+
-
1
4
7
2
5
8
0
3
6
9
3
1 Power source | 2 Remote indicator | 3 Handheld communicator | 4 External ground termination point | 5 Internal ground termination point |
6 Line load | 7 Harting Han 8D socket insert for mating plug (supplied loose)
6 DS/DHH805-EN Rev. C | Handheld communicator model DHH805
Ordering information
Select one character or set of characters from each category and specify complete catalog number.
Refer to additional ordering information and specify one or more codes for each device if additional option is required.
Base model – 1 st to 6th characters
DHH805
X
Handheld communicator for device-specific configuration of ABB HART devices and generic HART commands for third-party devices
Revision – 7th characters
Revision A
A
Additional ordering information
Add 2-digit code after the basic ordering information to select the required option(s)
XX
Software version
Full license for device-specific configuration of HART devices from every manufacturer
HF
Accessories (replaceable parts)
Item Description
no.
1
Silicone rubber shell
2
Battery assembly
- rechargeable Ni-MH battery version
Part
Quantity used
no.
per device
PV3048
1
1
7
AU3153
- 4 disposable battery version
AU3160
3
Locking screws for battery assembly
MB3038
4
4
Lamel for elastic strap
PV3046
2
5
Screws for lamel
MB3039
4
6
Elastic handle strap
AU3180
1
PV3042
1
SD memory card (8 GB)
EV3032
1
Power adapter / battery charger
EV3030
1
3
1
8
2
complete of hooks
7
Plastic cover for connector
(USB and recharger)
8
(110...220 Vac complete of adapters)
USB cable
ET3053
1
Leadset to the transmitter
AG5SB10003
1
Minigrabber
AG5SC10001
2
PV3055
1
Antistatic soft carry bag
4
5
4
5
6
Handheld communicator model DHH805 | DS/DHH805-EN Rev. C 7
ABB Ltd.
Industrial Automation
Howard Road
St. Neots
Cambridgeshire PE19 8EU
UK
Tel: +44 (0)1480 475321
Fax:+44 (0)1480 217948
ABB Inc.
Industrial Automation
125 E. County Line Road
Warminster
PA 18974
USA
Tel: +1 215 674 6000
Fax:+1 215 674 7183
ABB Automation Products GmbH
Industrial Automation
Schillerstr. 72
32425 Minden
Germany
Tel: +49 551 905 534
Fax:+49 551 905 555
ABB S.p.A.
Industrial Automation
Via Luigi Vaccani 4
22016 Tremezzina (CO)
Italy
Tel: +39 0344 58111
ABB Engineering (Shanghai) Ltd.
Industrial Automation
No. 5, Lane 369, Chuangye Road
201319, Shanghai,
P.R. China
Phone: +86 (0) 21 6105 6666
Fax: +86 (0) 21 6105 6992
www.abb.com
Note
We reserve the right to make technical changes or
modify the contents of this document without prior
notice. With regard to purchase orders, the agreed
particulars shall prevail. ABB does not accept any
responsibility whatsoever for potential errors or
possible lack of information in this document.
We reserve all rights in this document and in the
subject matter and illustrations contained therein.
Any reproduction, disclosure to third parties or
utilization of its contents - in whole or in parts – is
forbidden without prior written consent of ABB.
Copyright© 2017 ABB
All rights reserved
3KXD311805R1001
Sales
Service
DS/DHH805-EN Rev. C 06.2017
Contact us
Download PDF
Similar pages