● Registered design in Japan, China, and the European Union.
● Design registration pending in the United States of America.
SURFTEST SJ-210 SERIES
This is it! A small, lightweight, and extremely easy to use surface roughness
measurement instrument that lets you view surface roughness waveforms
right on the color LCD screen.
Bulletin No. 2194(2)
FORM MEASUREMENT
PORTABLE SURFACE ROUGHNESS TESTER
Rt
The Surftest SJ-210 is a user-friendly surface roughness
measurement instrument designed as a handheld tool
that can be carried with you and used on-site.
Rz
Easy to use
Rz
Rz
2.4-inch color graphic LCD with backlight
The color LCD provides excellent readability and an intuitive display that's easy to navigate.
The LCD also includes a backlight for improved visibility in dark environments.
Simple key layout
Rt
The Surftest SJ-210 can be operated easily using the keys on the front of the unit and
under the sliding cover.
Highly functional
Rz
Rz
Rz
Advanced data storage capabilities
Up to 10 measurement conditions and one measured profile can be stored in the
internal memory.
Optional memory card
An optional memory card can be used as an extended memory to store large quantities
of measured profiles and conditions.
Password protection
Access to each feature can be password-protected, which prevents unintended
operations and allows you to protect your settings.
Multilingual support
The display interface supports 16 languages, which can be freely switched.
Stylus alarm (patent pending in Japan)
Rt
An alarm warns you when the cumulative measurement distance exceeds a preset
limit.
Extensive analysis
and display features
Rz
Rz
平均線
Rz
Complies with many industry standards
The Surftest SJ-210 complies with the following standards: JIS (JIS-B0601-2001,
JIS-B0601-1994, JIS B0601-1982), VDA, ISO-1997, and ANSI.
Rt
Displays assessed profiles and graphical data
In addition to calculation results, the Surftest SJ-210 can display sectional
calculation results and assessed profiles, load curves, and amplitude distribution
curves.
Rz
2
Rz
Rz
評価長さ
確率密度
Color graphic LCD
Battery
Intuitive display that's clear, sharp, and legible.
The battery charges in one
quarter the time of previous
Mitutoyo products.
Large, 2.4-inch LCD
The large LCD provides excellent readability.
Backlight
The backlight improves visibility in dark
environments.
Operation keys
•The keys on the front of the unit and under the sliding
cover are clearly labeled and easy to use.
•The user-friendly screen layout and arrow keys
provide intuitive operability.
•Displayed settings can be changed easily by using
the left and right arrow keys.
(Patent pending in Japan.)
• Infrequently used keys are hidden under the sliding
cover to prevent unintended operations.
High-speed USB communication
Drive unit
The drive unit can be separated from the
display unit by using a cable, allowing more
flexible measurement. The driver can be
separated and reattached in one simple
step.
Applicable standards
Data can be transferred to and from
a computer via the high-speed USB
interface.
In addition to
JIS and ISO, the
Surftest SJ-210
also complies with
ANSI and VDA
standards.
Memory card support
Zt3
Zt2
Zt1
The display
inter face
suppor ts 16
languages.
c
平均線
Zt6
Multilingual support
Zt5
Zt4
There are many different kinds of drive units
and detectors available.
The memory card slot lets you store large
amounts of data onto a memory card.
評価長さ
0 20 40 60 80 10
Rmr(c),%
基準長さ
3
Many features in a compact body
Extensive display features that assist measurement
● The highly visible 2.4-inch color graphic LCD with backlight
lets you see the screen easily even in dark environments.
● Assessed profiles, load curves, and
amplitude distribution curves can be
displayed in addition to calculation
results. Assessed profiles can also be
zoomed up and down.
● The display mode can be freely switched between
portrait and landscape.
● Calculation results are displayed in large
characters.
● Pass/fail results are displayed
in color.
Advanced data storage capabilities
● Up to 10 measurement conditions can be stored in the
internal memory. Conditions can be quickly read according
to the workpiece.
● An optional memory card can be used as an extended
memory to store large quantities of measured profiles and
conditions. *See page 10 for details about the memory card.
Stylus alarm function
● An alarm warns you when the cumulative
measurement distance exceeds a preset
limit. This feature can be used to prevent
problems that would be caused by worn
out styli.Any value can be specified as
the limit. (Patent pending in Japan)
Storage Capacity
Data type
Internal
memory
Measured profiles
1
Calculation result
10
Measurement condition
10
Memory Card
(option)
10000
500
● Many interface options:
• A USB interface is equipped
as standard.
• The Surftest SJ-210 also
provides an RS-232C output,
Digimatic output, printer
output, and footswitch input.
Easy setting
● Displayed settings can be easily changed
by pressing the left and right arrow keys
under the sliding cover. For example,
these keys can be used to switch the cutoff value (λc) and the number of sampling
lengths (N) on the measurement screen.
(Patent pending in Japan)
(Example of the
measurement screen)
Setting parameters and recalculating results
Advanced features
● The multilingual display interface supports 16 languages,
which can be freely switched.
● Access to features can be password-protected.
● A quick-charge, long-life battery is provided.
● The required parameters can be selected
from the screen. The sub-menu also
lets you specify detailed settings such
as the tolerance. After completing
measurement, the parameters can be
changed and calculation can be executed
again* using the new parameters.
*May not be possible, depending on
4
the measurement conditions.
Detector / Drive Units
Battery-powered portability scores when making surface roughness measurements on
the shop floor.
Capable of performing measurements in any orientation, including vertical and upside-down. Optional accessories, such as a height gage
adapter, allow measurements to be performed efficiently in various situations and setups.
*Refer to pages 8 to 11 for details of the optional accessories available.
A wide variation in system setup is possible with the detector + drive unit + display
unit combination.
Highly functional detectors and drive units
The driver can be separated from the
display unit and reattached in one
easy step.
[Storing drive unit in Display unit]
Detector supplied as standard
[Detaching drive unit
from Display unit]
Drive units
Standard drive unit
• Popular standard drive unit
Selectable from the following two items.
● Measuring force: 0.75mN
Stylus profile: Tip radius 2µm
Tip angle 60°
● Measuring force: 4mN
Stylus profile: Tip radius 5µm
Tip angle 90°
Optional detectors
Transverse tracing drive unit
Retractable drive unit
• Best suited for measurement of • The detector is in the retracted
nar ro w, shro u d e d w o r k p i e ce position at rest so it is immune
features such as crankshaft, EDM from damage when inserted into
a feature whose profile cannot be
parts, etc.
easily seen, such as a blind hole, etc.
(Patent Registered in Japan)
Carrying case
A wide range of optional detectors is available, including
detectors for small holes, extra small holes, gear tooth
surfaces, and deep grooves.
*See page 8 for details about the Detectors.
A convenient carrying
case is supplied as
standard for
protecting the
instrument in the field.
5
Specifications
Type of detector
Standard drive unit type
Model No.
Order No.
inch / mm
X axis
Measuring
Range
Z axis
range
(Detector) Range / Resolution
Measuring speed
Measuring force / Stylus tip
Skid force
Applicable standards
Assessed profiles
Evaluation parameters
Analysis graphs
Filters
Cut off length
Sampling length
λc
λs
Number of Sampling lengths (×n)
LCD dimensions
Display languages
Calculation result display
Printing function *1
(Dedicated printer is required separately.)
External I /O
Customization
GO / NG judgment *2
Storage of measurement condition
Functions
Storage
Calibration
Power-saving function
Power supply
Size (W×D×H)
Mass
Standard accessories
Retractable drive unit type
*Charging time: about 4 hours (may vary due to ambient temperature)
*Endurance: about 1000 measurements (differs slightly due to use conditions / environment)
Display unit
Drive unit
2.05 x 2.6" x 6.3" (52.1×65.8×160mm)
4.5 x .9 x 1.02" (115×23×26mm)
About 1.1lbs (500 g) (Display unit + Drive unit + Standard detector)
12BAA303 Connecting cable *4
12BAA303 Connecting cable *4
178-606 Roughness specimen (Ra 1.00µm)
178-602 Roughness specimen (Ra 3.00µm)
12AAE643 Point-contact adapter
12BAK699 Carrying case
12AAE644 V-type adapter
12BAK700 Calibration stage
12BAK699 Carrying case
12BAK820 Protective sheets for display
12BAK700 Calibration stage
AC Adapter
12BAK820 Protective sheets
Operation manual
for display
Quick reference manual
AC Adapter, Operation manual
Warranty
Quick reference manual, Warranty
*1: Order the SJ-210 printer (No.178-421A, optional accessory) separately.
See page 10 for details about the SJ-210 printer.
*2: Standard deviation only can be selected in ANSI. 16% rule cannot be selected in VDA.
*3: Auto-sleep function is invalid when AC adaptor is used.
*4: For connecting the calculation display unit and drive unit.
6
Transverse tracing drive unit type
SJ -210
SJ -210
SJ -210
(4mN type)
(4mN type)
(4mN type)
178-561-02A
178-563-02A
178-565-02A
.69" (17.5mm)
.22" (5.6mm)
14200 µin (-7900µin~+6300µin) / 360µm (-200µm ~ +160µm)
14170µin /.8µin (360µm / 0.02µm), 4000µin / .2µin (100µm / 0.006µm),1000µin /.08µin (25µm / 0.002µm)
Measuring: 0.01, 0.02, 0.03 in/s (0.25mm/s, 0.5mm/s, 0.75mm/s) Returning: 1mm/s
0.75mN type: 0.75mN / 2µmR 60°, 4mN type: 4mN / 5µmR 90°
Less than 400mN
JIS ’82 / JIS ’94 / JIS ’01 / ISO ’97 / ANSI / VDA
Primary profile / Roughness profile / DF profile / Roughness profile-Motif
Ra, Rc, Ry, Rz, Rq, Rt, Rmax, Rp, Rv, R3z, Rsk, Rku, RPc, Rsm, Rmax, Rz1max, S, HSC, RzJIS, Rppi, R∆a, R∆q,
Rlr, Rmr, Rmr(c), R δ c, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo, Rpm, tp, Htp, R, Rx, AR, Possible Customize
Bearing area curve / Amplitude distribution curve
Gaussian, 2CR75, PC75
0.003, 0.01, 0.03, 0.1" (0.08 , 0.25 , 0.8 , 2.5mm)
100, 300µin (2.5 , 8µm) or none
0.003, 0.01, 0.03, .1 " (0.08 , 0.25 , 0.8 , 2.5mm)
×1, ×2, ×3, ×4, ×5, ×6, ×7, ×8, ×9, ×10,
×1,×2,×3,×4,×5,×6,×7,×8,×9,×10,
Arbitrary .0118 ~ .22"(.0001" Interval)
Arbitrary 0.01~.63" (.0001"interval) [(0.3~16.0 mm: 0.01mm interval)]
[(0.3 ~ 5.6mm: 0.01mm Interval)]
1.45 x 1.93" (36.7×48.9 mm)
Japanese, English, German, French, Italian, Spanish, Portuguese, Korean,
Traditional Chinese, Simplified Chinese, Czech, Polish, Hungarian, Turkish, Swedish, Dutch
Vertical display: 1 parameter / 3 parameter / trace to measurements
Horizontal display: 1 parameter / 4 parameter / trace to measurements (Horizontal display is invertable)
Measurement conditions / Calculation results / Calculation results for each sampling length /
Assessed profile / Bearing area curve / Amplitude distribution curve / Environment setting information
USB I / F, Digimatic Output, Printer Output, RS-232C I / F, Foot SW I/F
Desired parameters can be selected for calculation and display
By max value / 16% / Standard deviation
Save the conditions at power OFF
Internal memory: Measurement condition (10 sets), Measured profile (1set)
Memory card (Option): 500 measurement conditions, 10000 measured profiles, 500 display images
Text file (Measurement conditions / Measured profile / Assessed profile /
Bearing area curve / Amplitude distribution curve)
Saves last inputted nominal value of specimen / Average calibration with multiple measurement (Max.5 times) is available
Auto-sleep off function (10-600sec) *3
Two-way power supply: battery (rechargeable Ni-MH battery) and AC adapter
SJ -210
(0.75mN type)
178-561-01A
Dimension Display Unit and Drive Unit
Display unit, Drive unit
Unit: inch(mm)
● Drive unit stored inside display unit (Standard detector installed in drive unit)
8.43”(214.1)
6.85”(174.1)
6.3”(160)
0.56”
(14.1)
POWER
DATA
START
STOP
2.6”(65.8)
PAGE
Sliding cover : Closed
1.57”(40)
POWER
DATA
START
STOP
PAGE
Sliding cover : Open
With back
face cover
2.05”(52.1)
Without back
face cover
● Drive unit not stored inside display unit (Standard detector installed in drive unit)
POWER
DATA
START
STOP
0.9”(23)
PAGE
Standard drive unit
1.02”(26)
Connecting cable 39.4”(1m)
0.99”
(25.2)
1.05”
(26.7)
4.53”(115)
1.02”(26)
.039”(1)
1.02”(26)
0.9”(23)
Transverse tracing drive unit
0.9”(23)
Retractable drive unit
6.3”(160)
0.118”(3)
0.08”(2)
0.91”(23.2)
1.05”(26.7)
4.53”(115)
0.26”(6.6)
1.77”(45)
1.8”(46.5)
4.53”(115)
7
Dimensions Detectors and Drive units
Detectors
Unit: inch(mm)
Gear-tooth surface detectors
0.75mN
4 mN
0.75mN
4 mN
0.75mN
4 mN
Dedicated to the
standard/retractable
drive unit
Dedicated to the
transverse tracing
drive unit
Dedicated to the
standard/retractable
drive unit
2 µmR/60˚
5 µmR/90˚
2 µmR/60˚
5 µmR/90˚
2 µmR/90˚
10 µmR/90˚
*Tip radius / Tip angles
178-388
178-398
0.75mN
4 mN
2 µmR/60˚
5 µmR/90˚
.4
ф2
0.6
1.4
60.1
Stylus
12.6
60°
ф9
4.8
1.5
2.4
6
3.5
59.5
Small hole detectors
Deep groove detectors
Order No.
Measuring Stylus profiles* Remarks column
force
Order No.
178-383
0.75mN
2 µmR/60˚
178-385 0.75mN
2 µmR/60˚ Not available for
178-392
4 mN
5 µmR/90˚
178-394
5 µmR/90˚ tracing drive unit
4.8
1.5
3.5
2
Extra small hole detectors
Measuring Stylus profiles* Remarks column
force
178-384
0.75mN
2 µmR/60˚
178-393
4 mN
5 µmR/90˚
1.6
0.8
ф9
2.4
Minimum
measurable hole
diameter:2ф .8mm
60.3
Stylus
0.4
1.8
12.8
ф
4.8
Drive units
Order No.
Order No.
178-230-2
61
Stylus
16.4
1.5
*Tip radius / Tip angles
the transverse
*Tip radius / Tip angles
60.7
Stylus
Standard drive unit
178-233-2
S-Drive unit
178-234-2
S-Drive unit set
(includes point-contat adapter)
178-235
R-Drive unit
Remarks column
ф9
3.5
4 mN
Stylus
profiles*
10
3. 8
Measuring
force
9
13.6
16.2
ф
Minimum
measurable hole
diameter:4ф .5mm
ф9
*Tip radius / Tip angles
8
Stylus profiles*
*Tip radius / Tip angles
61
Stylus
16.4
Measuring
force
ф9
178-296
178-390
178-387
178-386
178-395
178-391
Order No.
1.8
Measuring Stylus profiles* Remarks column
force
0.4
Order No.
R40
0.9
Standard detectors
Optional Accessories For Drive Unit
Drive unit accessories
Nosepiece for flat surface
Nosepiece for cylindrical surface
Nosepiece for flat surface
No.12AAA217
No.12AAA217
*Not available for the
transverse tracing
drive unit.
*Not available for the
transverse tracing
drive unit.
Point-contact adapter
V-type adapter
No.12AAE644
No.12AAE643
7.7mm
*Transverse tracing drive
unit type standard
accessories.
*Dedicated to the transverse
tracing drive unit.
Extension rod (50mm)
Nosepiece for cylindrical surface
No.12AAA218
No.12AAA218
*Transverse tracing drive
unit type standard
accessories.
*Dedicated to the transverse
tracing drive unit.
m
72m
(Note: Extension is possible with only a single rod.)
No.12AAA210
*Not available for the
transverse tracing
drive unit.
No.12BAA303
Extension rod 50mm
No.12AAA210
*For connecting between calculation
display unit and drive unit.
Vertical positioning adapter
Support feet set
No.12AAA216
*Not attachable to the
detector side of the
transverse tracing
drive unit.
Support feet set
No.12AAA216
No.12AAA219
Vertical positioning adapter
No.12AAA219
*Not available for the
transverse tracing
drive unit.
Detector side
Height gage adapter
Magnetic stand adapter
No.12AAA221 (ø 8mm)
No.12AAA220 (ø 9.5mm)
Extension cable (1m) (Note: Extension is possible with only a single cable.)
Magnetic
stand adapter
No.12AAA222 ( 9×9mm)
No.12AAA233 (1/4 in×1/2 in)
Setting attachments
Height gage adapter
* Not available for the transverse tracing drive unit
Enhances measurement efficiency by facilitating the measurement setup of multiple workpieces of the same type and of the hard-to-access sections
of a workpiece.
Setting attachment: V type for measuring
in the cylinder axis direction
No.178-033
The V-width is adjustable
to the cylinder diameter
facilitating axial
measurement of a wide
range of cylinder diameters.
• Adjustable range:
ø 5 ~ 150mm
Setting attachment: Magnetic slider type
No.178-034
Best suited for
measurement of the
flat surface of a
workpiece that has
partial indentions
and steps and that is
hard to set the drive unit. Combination use with
the magnet type specimen holder (Option No.
12AAA910) further improves the ease of operation.
Setting attachment: Inside diameter type
No.178-035
Greatly facilitates measurement
of internal wall surfaces, for
example, a cylinder block.
• Applicable diameter:
ø 75 ~ ø 95mm
• Accessible depth:
30 ~ 135 mm
9
Optional Accessories For External Equipment
Printer for SJ-210
Digimatic mini processor DP-1VR
Assessed profiles and calculation results and curves can be printed
out by connecting the SJ-210-dedicated printer, which is palm
sized 3.7 x 4.9 x 2.7" (W×D×H: 93×125×70mm) and can run on an
internal battery.
By connecting this printer to the Surftest SJ-210's digimatic
output, you can print calculation results, perform a variety of
statistical analyses, draw a histogram or D chart, and also perform
complicated operations for X-R control charts.
■Power supply can be selected. (AC adapter or battery pack)
■ Printable items: Measurement conditions, calculation results, assessed
profile, bearing area curve (BAC), amplitude distribution curve
(ADC), and environment settings.
264-504-5A
178-421A
SJ-210 → DP-1VR Connecting cable
1m: No. 936937 Digimatic SPC cable
2m: No. 965014 Digimatic SPC cable
Unit configuration:
① Printer main unit
② Printer connecting cable
③ Printing paper 6-pack ④ Battery pack 1 piece
⑤ Exclusive use AC adaptor
(with AC power cord)
1 piece
Memory card
Example of the connection with SJ-210
A memory card for saving 500 measurement conditions, 10,000
measured profiles, 500 display images, text file (measurement
conditions, measured profiles, assessed profiles, BAC, ADC)
*Not all memor y cards can be
recognized. Please use the
memory card recommended by
Mitutoyo.
Example of the output
by the printer
No. 12AAL069
Printer for SJ-210 supplies:
Printing paper (5-pack) No. 12AAA876
10
Optional Accessories For External Output
Simplified communication program for SURFTEST SJ series
The Surftest SJ-210 has a USB interface, enabling data to be transferred to spreadsheet or other software.
We also provide a program that lets you create inspection record tables using a Microsoft Excel* macro.
Required environment*:
• OS:Windows XP-SP3
Windows Vista
Windows 7
Windows 8 (32/64bit)
• Spreadsheet software: Microsoft Excel 2002
Microsoft Excel 2003
Microsoft Excel 2007
Microsoft Excel 2010/13
*Windows OS and Microsoft Excel are products of
Microsoft Corporation.
The optional USB cable is also required.
• USB cable for SJ-210 series (2m)
No. 12AAL068
This program can be downloaded for free from
the Mitutoyo website.
*Will not work with MS Excel 2016
http://www.mitutoyo.com
Footswitch
Input Tool: Calculation results input unit
A footswitch is used to trigger measurement. This tool is very useful
in cases where you need to measure the same workpiece multiple
times using jigs and other fixtures.
Surftest SJ-210 calculation results can be loaded directly into
commercial spreadsheet software via this unit simply by connecting
it to the USB connector on a computer or a PS/2 type keyboard
connector. (See Catalog No. E4250-264 for details.)
No. 12AAJ088
USB keyboard signal conversion model
IT-012U No. 264-012-10
PS/2 keyboard signal conversion model
IT-005D No. 264-005
11
© 2016 Mitutoyo America Corporation
Coordinate Measuring Machines
Vision Measuring Systems
Form Measurement
Optical Measuring
Whatever your challenges are,
Mitutoyo supports you from start to finish.
Sensor Systems
Test Equipment
and Seismometers
Digital Scale and DRO Systems
Small Tool Instruments
and Data Management
Mitutoyo is not only a manufacturer of top-quality
measuring products but one that also offers qualified
support for the lifetime of the equipment, backed by
comprehensive services that ensure your staff can make
the very best use of the investment.
Apart from the basics of calibration and repair, Mitutoyo
offers product and metrology training, as well as IT
support for the sophisticated software used in modern
measuring technology. We can also design, build, test
and deliver measuring solutions and even, if deemed
cost-effective, take your critical measurement challenges
in-house on a sub-contract basis.
Find additional product literature
and our product catalog
www.mitutoyo.com
Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance
data contained in this printed matter as well as other technical data are to be regarded as approximate average values. We
therefore reserve the right to make changes to the corresponding designs. The stated standards, similar technical regulations,
descriptions and illustrations of the products were valid at the time of printing. In addition, the latest applicable version of our
General Trading Conditions will apply. Only quotations submitted by ourselves may be regarded as definitive. Specifications
are subject to change without notice.
Mitutoyo products are subject to US Export Administration Regulations (EAR). Re-export or relocation of our products may
require prior approval by an appropriate governing authority.
Trademarks and Registrations
Designations used by companies to distinguish their products are often claimed as trademarks. In all instances where Mitutoyo
America Corporation is aware of a claim, the product names appear in initial capital or all capital letters. The appropriate
companies should be contacted for more complete trademark and registration information.
Mitutoyo America Corporation
www.mitutoyo.com
One Number to Serve You Better
1-888-MITUTOYO (1-888-648-8869)
M3 Solution Centers:
Aurora, Illinois (Headquarters)
Boston, Massachusetts
Huntersville, North Carolina
Mason, Ohio
Plymouth, Michigan
City of Industry, California
Birmingham, Alabama
Renton, Washington
Houston, Texas
3M 0716-04 • Printed in USA • July 2016
Download PDF
Similar pages