Xerox Color C60/C70 Series Printer

Version 2.7
December, 2014
®
Xerox Color C60/C70 Series Printer
Customer Expectation & Installation Guide
Xerox® Color C60/C70 Series
Table of Contents
Xerox Color® C60/C70
Table of Contents
1 Product Overview ............................................................................................... 1
Introduction ................................................................................................................................ 1
Product Highlights.................................................................................................................. 1
System / Product Configuration .................................................................................... 1
2 Detailed Specifications .................................................................................... 2
Product Specifications ........................................................................................................ 2
System Specifications ......................................................................................................... 2
Device Specifications .......................................................................................................... 2
Operating Environment ...................................................................................................... 3
Electrical Requirements ..................................................................................................... 3
Feature Specifications ........................................................................................................ 3
Accounting.................................................................................................................................. 6
Device Management ............................................................................................................ 7
Controller/Print Server ........................................................................................................ 7
System Productivity .............................................................................................................. 8
Feeding Specifications..................................................................................................... 10
Envelope Feeding Guidelines/Limitations............................................................ 11
Finishing Specifications................................................................................................... 12
Media and Substrate ......................................................................................................... 17
Xerox Sustainability ........................................................................................................... 17
3 Maintenance and Support ...........................................................................18
Customer/Operator Maintenance.............................................................................. 18
Support Services ................................................................................................................. 18
Call Procedure ...................................................................................................................... 18
Training ..................................................................................................................................... 18
Product Sustainability ....................................................................................................... 18
Supplies and Consumables .......................................................................................... 19
Initial Supplies ....................................................................................................................... 19
Recommended Supplies ................................................................................................ 19
4 Installation .............................................................................................................20
Roles and Responsibilities ............................................................................................ 20
Connectivity for Remote Services............................................................................. 21
Installation Planning .......................................................................................................... 22
Main Components............................................................................................................... 22
Module Dimensions ........................................................................................................... 22
Electrical Requirements .................................................................................................. 23
Space Requirements/ Service Space Envelope .............................................. 24
Power Consumption .......................................................................................................... 25
Installation Considerations ............................................................................................ 25
Customer Expectation and Installation Guide
ii
Table of Contents
Xerox Color ® C60/C70
Network Requirements .................................................................................................... 25
Fax Telephone Line Requirements (Optional) .................................................. 25
Convenience Stapler (Optional) ................................................................................. 26
Energy Star ............................................................................................................................. 26
5 Operational Considerations ........................................................................27
Image Quality Expectations .......................................................................................... 27
Print Expectations ............................................................................................................... 27
Scanning Expectations .................................................................................................... 27
Non-standard Paper Sizes ............................................................................................ 27
Service Uptime ..................................................................................................................... 28
Solutions ................................................................................................................................... 28
Operational Definitions .................................................................................................... 29
Appendix ....................................................................................................................30
Links: (Paste into your browser) ................................................................................ 30
Customer Agreement .........................................................................................31
Customer Expectation and Installation Guide
iii
Product Overview
Xerox Color ® C60/C70
1 Product Overview
The C60/C70 offers the widest range of applications in this market space due to our low melt toner, flexible paper path and our unique relationship with
Domtar Paper. We can run synthetics, plastics, vinyls, window clings, carbonless paper, nevertear paper, transfer papers, magnets and many other
unique applications that the competition simply is unable run on their devices. The C60/C70 also produces Image Quality that is benchmark compared to
the competition. We offer 2400 x 2400 dpi which enables us to create the best images in our class with the widest color gamut, best fine line detail, and
color consistency from print to print and job to job. Finally, the C60/C70 has received noteworthy reliability and productivity per BLI. BLI has recognized
the C60/C70 family as having the best reliability and productivity in our market class.
Introduction
When at the workplace, the Xerox Color C60/C70 series gives your staff the luxury of controlling device functions from any workstation. Plus, mobile
professionals can stay connected to the communications tools and productivity solutions offered by the C60/C70 series – for more flexibility regardless of
location.
Product Highlights
Benchmark Productivity
Paper-intensive industries like healthcare, finance, and the public sector are struggling to find efficient and cost-effective ways to bridge the paper to
digital void.
Security
IT security managers are already overwhelmed with managing security demands of ever growing connected devices, threats and regulations. Small
businesses don’t really have the staff to manage security.
Environment
Your work environment is just a small piece of the puzzle that forms our natural environment. The choices you make impact the overall health of our
planet, for better or worse; and office technology is a key consideration.
System / Product Configuration
Customer Expectation and Installation Guide
1
Xerox Color ® C60/C70
Detailed Specifications
2 Detailed Specifications
Product Specifications
System Specifications
Print Speed and
Monthly Volume
Simplex Speed
B&W/Color
Recommended
Average Monthly
Print Volume1
Maximum Monthly
Duty Cycle2
Connectivity
C60
C70
Up to 65 /60 ppm
Up to75 / 70 ppm
15,000-60,000 pages
15,000-60,000 pages
Up to 300,000 pages
Up to 300,000 pages
10/100/1000Base-T Ethernet, High-Speed USB 2.0 direct print,
Device Specifications
Control Panel Language Support
English, French, German, Spanish, Italian, Dutch, Brazilian,
Portuguese, Swedish, Norwegian, Danish, Finnish, Turkish, Greek,
Russian, Czech, Polish, Romanian, Hungarian, Catalan
NOTE: Hebrew and English are supported on a different ROM
What exactly is Duty Cycle?
Duty Cycle is a print device’s rated capacity to continuously perform
work under normal conditions. It is usually expressed as the
sustainable volume in letter or A4-sized pages that can be printed per
month.
Define the problem
When discussing a machine’s capabilities, there is often a
misconception about its Duty Cycle. Customers tend to think in terms
of duty cycle, while Xerox thinks in terms of AMPV (Average Monthly
Print Volume). Many print device vendors today do not define what
these terms mean, how they are different, and how it affects a
customer.
What are considered “normal conditions”?
Because Duty Cycle is based on how the printer performs under
“normal conditions,” you first must define what “normal conditions”
are—and there are many factors that affect the execution of everyday
print jobs. These include everything from the robustness of the
machine and the types of applications being run to the physical
environment in which the customer is printing.
In addition, any true measure of what constitutes “normal” must
account for those occasions when a job is running at less than
maximum speed. And as we all know, there are other times that for
any number of reasons, a job isn’t running and the machine sits idle.
It’s a natural part of the printing business. So to calculate Duty Cycle,
Xerox took into account these “normal conditions”, as well as the
anticipated shift usage per week, to consider all factors that a machine
and its operators may encounter when running print jobs.
What is the difference between AMPV and Duty Cycle?
Duty Cycle takes into account the actual capabilities of a machine with
varying circumstances, while Average Monthly Print Volume (AMPV) is
the volume an average customer is expected to produce on a machine
in a month. AMPV reflects a range of an entire machine population’s
monthly usage, while Duty Cycle displays the potential to grow while
still utilizing the machine. This is important to keep in mind because
although a customer’s typical print volume may fall into the AMPV
range, the company may grow beyond the usual volume and printing
capability of the machine. This is why when making a buying decision,
a customer should look at their AMPV and the company’s potential to
grow.
Technology
Advanced Emulsion Aggregate (EA) Low MeltToner
1
The Average Monthly Print Volume is the expected regular monthly
throughput.
2
The Monthly Duty Cycle is the maximum volume capacity expected in any
one month. This volume us supported under standard vendor supplied
service for any single month but is not expected to be sustained on a
regular basis. Customers should consider higher volume machines or
multiple machines is average monthly volume approaches the maximum
duty cycle on a continual basis.
Customer Expectation and Installation Guide
Certifications
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
FCC Class A Compliant (US), ICES Class A Compliant (Canada)
CSA Listed (UL 60950-1, Second Edition)
CB Certified (IEC 60950-1, Second Edition)
ENERGY STAR®
GOST
NOM
Environmental Choice Eco Logo (Cananda)
CE Marked
EPEAT-Bronze/Silver (United States)
GS Mark
Citrix® Certified
WHQL
Cerner
MEDITECH
SAP
To view the latest list of certifications, go to
www.xerox.com/OfficeCertifications (Paste into your browser)
Accessory Options
OHCF (Oversize High Capacity Feeder with small media bracket)
IFM (Interface Module)
Business Ready Finisher
Business Ready Finisher with Booklet Maker
Standard/Light Production Finisher
Light Production Finisher w/Booklet Maker
Hole Punch for Business Ready Finisher
GBC Advanced Punch
Square-fold Trimmer
C/Z Folder
Vertical Transport Module
Convenience Stapler (includes Work Surface)
Postscript Kit
Media Card reader
Smart Card Enablement Kit (CAC)
Xerox Secure Access Unified ID System® (with USB Card Reader)
with Follow-You Print™
• Walk up Fax (One, two or Three-line options, includes LAN Fax)
• ScanFlowStore®
Foreign Device
Also known as Auxiliary Access Device, this is an
Interface (FDI)
interface to third party access control devices, such
(Optional)
as coin machines and card readers.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2
Xerox Color ® C60/C70
Detailed Specifications
Operating Environment
Operating
Environment
C60/C70
Required Temperature
Range
Required Relative Humidity
Altitude (above sea level)
Sound Power Levels
(Base Configuration)
Sound Pressure Levels
(Base Configuration)
50° to 82° F (10° to 28° C)
15% to 85% RH
Max of 8,200 (2,500 meters)
Operating: 7.55 LwAd(B)
Standby: 5.17 LwAd(B)
Operating: 57.4 LpAd(dBA)
Standby: 34.7 LpAd(dBA)
Electrical Requirements
Electrical
North America
Europe / Asia /
South America /
Africa
C60/C70
Voltage : 110-127 VAC +/- 10%
Frequency: 50/60 Hz +/- 3%, 20 A
Voltage : 220-240 VAC +/- 10%
Frequency: 50/60 Hz +/- 3%, 10 A
Conv. Stapler
Print Server
Monitor
OHCF (1- or 2- tray)
IFM
Standard Finisher
Booklet Maker Finisher
GBC Advanced Punch
Square-Fold Trimmer
(120V 15 A) / (220V 10 A
(120V 15 A) / (220V 10 A
(120V 15 A) / (220V 10 A
(120V 15 A) / (220V 10 A)
(120V 15 A) / (220V 10 A
(120V 15 A) / (220V 10 A)
(120V 15 A) / (220V 10 A)
(120V 15 A) / (220V 10 A)
(120V 15 A) / (220V 10 A)
C/Z Folder
(120V 15 A) / (220V 10 A)
Spectrophotometer powered
through USB port
Feature Specifications
Print
First Print Out Time3
NA Specific Power Requirements:
C60/C70
Line Option
Sole Use (not required but
recommended)
Voltage
110-127
Amperage
20
Cycles
60 Hz, Single Phase
Xerox Receptacle Part Number
600S3703
Receptacle NEMA Part Number
5-20R
Power Cord Length
8.5ft.
Receptacle Diagram
The Xerox Color C60/C70
requires the use of a 20-ampere
outlet, which is standard in most
modern office buildings. Consult
the diagram (right side) to
confirm the existence of this
outlet in the proposed
installation space.
Accessories Requiring External Power Source
Resolution
Registration
Max Printable Area
120 V 20A
NEMA 5-20R
EU Specific Power Requirements:
C60/C70
Line Option
Sole Use (not required but
recommended)
Voltage
220-240
Amperage
10
Cycles
50 Hz, Single Phase
Receptacle
Power Cord Length
The Xerox Color C60/C70 requires
the use of a 10-ampere outlet,
which is standard in most modern
office buildings. Consult with local
service to determine the country
specific receptacle and confirm the
existence of this outlet in the
proposed installation space.
8.5ft.
Customer Expectation and Installation Guide
Print Features
C60/C70
A4 LEF Simplex Color 10.4 seconds /
Black-and-white 8.5 seconds
Up to 2400 x 2400 dpi, 256 shades of gray
Printing registration specifications for 8.5 x
11” (A4):
• ±0.7 mm (side 1-2), along the lead edge
from Trays 1-4
• ±1.2mm (side 1-2) along the side edge
from Trays 1-4
• Skew along Lead Edge from Bypass
tray skew is ±1.5mm.
The Xerox® Color C60/C70 will reproduce
11” x 17” full bleed when printing on 12” x
18” or 13” x 19” paper and A3 full bleed
when printing on SRA3 paper. The
maximum length images (480mm) are
only produced on media 19” long. On all
media there is a Lead Edge deletion of
4mm and a Trail Edge deletion of 4mm.
Side edge deletion is 3mm except for 13”
x 19” media. On 13” x 19” media the side
deletion is 3.5mm.
Copy
Max Image Area
297mm x 432mm
11.69” x 17”
Guaranteed Image Quality Area:
297mm x 432mm
11.69” x 17”
Print
Max Image Area
323mm x 480mm 12.72” x 18.90”
Guaranteed Image Quality Area:
317mm x 480mm
12.48” x 18.90”
Optional:
PostScript Kit
Adobe PostScript printing (includes a
small plug-in card)
Standard:
• Print from USB, Earth Smart Driver
Settings, Job Identification, Booklet
Creation, Store and Recall Driver
Settings, Bi-directional Status, Scaling,
Job Monitoring, Color By Words, Xerox®
PrintBack
3
Xerox Color ® C60/C70
Detailed Specifications
Print
C60/C70
Application Defaults
Banner Sheet Enable / Disable
Bi-directional Status
Cover Selection
Delay Print (specific time)
User Permissions
Image Options (Toner Saver,
Resolution (Standard, Enhanced, High)
• Job Identification (Print ID or Banner,
Print ID in margins on first page only or
all pages)
• Layout / Watermark (N-up (up to 16
pages per sheet), Multi-up, Booklet
layout / finishing, Fit to new paper size)
• Paper Selection by Attribute
• LAN Fax (requires optional Fax Kit)
• Sample Set
• Store File to Folder Secure Print with
Timed Deletion
• Special Pages (exception page
programming: covers, inserts, exception
pages)
• Store and Recall Driver Settings
• Sustainability Features (Xerox® Earth
Smart Settings, Duplex, N-up, Turn-off
Banner and Print ID, Smart Sample Set,
Hold All Jobs)
• TWAIN Print Driver
Optional:
• Mobile Printing: Xerox® Mobile Print®,
Xerox® Mobile Print Cloud®
•
•
•
•
•
•
•
Print from USB
Xerox ® Mobile Express
Driver®
(X-MED)
Xerox ® Global Print
Driver®
Xerox ® Pull Print Driver
• Allows walk-up printing from Type A
USB port on front panel
• Supports direct printing from computer
via Type B USB port
• Supported file formats: PDF, JPEG,
TIFF, XPS TXT
Makes it easy for mobile users to find, use
and manage Xerox® and non-Xerox
devices in every new location. Plug into a
new network, and X-MED automatically
discovers available printers and provides
status and capability information. Save a
list of “favorite” printers for each location,
store application print settings for use on
any printer in any network, and greatly
reduce mobile support calls to IT.
A truly universal print driver that lets IT
administrators install, upgrade and
manage Xerox® and non-Xerox devices
from a single driver. It provides a
consistent, easy-to-use interface for endusers, reducing the number of support
calls, and simplifying print services
management.
Makes it easy for IT managers to qualify,
deploy and manage all print devices using
a single driver in a Pull Print environment.
Uses a single queue and single driver.
The Xerox® Pull Print Driver extends
convenience across a broad range of
printing assets. IT administrators no longer
need to manage and configure multiple
drivers. Used in conjunction with Xerox
Secure Access Unified ID System®,
Equitrac Office®, Ysoft® SafeQ®, Pharos®
and others.
Print Solutions
Customer Expectation and Installation Guide
Print
Xerox®
Mobile Print
Cloud
(Optional)
Xerox®
Mobile Print
Solution
(Optional)
Copy
First Copy
Out Time4
Sides
Quantity
Resolution
(max)
Reduce /
Enlarge
Features
Features
C60/C70
Xerox® Mobile Print Cloud addresses the needs of
businesses with a mobile workforce and puts you
ahead of the evolving mobile print need, but without
burdening staff, budget or infrastructure. Getting
started takes only a few minutes via the cloud. Print
from any mobile device to nearly any brand of printer.
Accurate printing with true Microsoft® Office®
rendering and more. Print what you need, when,
where and how you need it.
Xerox® Mobile Print Solution is an ideal choice for
sites that have additional requirements for control and
security with an onsite server. Xerox® Mobile Print
Solution allows users to print from most mobile
devices to nearly any brand of printer or MFP without
drivers or added complexity. Simply enter a release
code (PIN) at the device and get accurate printing
with true Microsoft Office rendering and more to use
with your server for private, onsite deployment.
C60/C70
As fast as 6.5 seconds color / 4.1 seconds black-andwhite/Platen
As fast as 9.6 seconds color / 5.3 seconds black-andwhite/DADF
Input-to-Output: 1-1, 1-2, 2-2, 2-1
1 to 9,999
Scan Up to 600 x 600 dpi;, 256 shades of gray
Variable zoom from 25% to 400% in 1% increments
• Annotation and Bates™ stamping (with color
capability and font size adjustment)
• Authentication for Services (i.e. Color Copy)
• Auto Paper Select
• Auto Reduction & Enlargement to fit selected paper
size
• Auto Tray Switching
• Automatic 2-sided/Duplex
• Booklet Creation
• Build Job: (Enables page-level programming and
also lets you proof each section or delete last
section as the job is built)
• Collation
• Covers (Front only, front and back, back only,
printed inside and out: Blank or Printed)
• Dividers (blank)
• Edge Erase
• ID Card Copy
• Image Quality Adjustments
• Image Shift (with Auto Center option)
• Invert Image (negative or mirror image)
• Interrupt
• Multi-up (up to 15 columns by 15 rows)
• Sample Set
• Stored Programming Single Color
• Stapling
• Transparencies
Xerox® Copier Assistant® (XCA) Software provides a
PC-based alternative to the user interface touch
screen. Used in conjunction with a customer-supplied
PC attached via the USB port, this software supports
text-to-speech, screen magnification and easy PC
keyboard access to basic and advanced copy
features. Section 508 compliant. For more information
4
The first copy out times are measured scanning a 8.5x11/A4 document on
platen and delivered to the center tray.
4
Xerox Color ® C60/C70
Detailed Specifications
Copy
C60/C70
Scan
or to download Xerox® Copier Assistant for free, visit
www.xerox.com
Scan
Concurrency
Input Speed
Resolution
Duty Cycle
Max Scan Area
Scan Template
Management
Network Print
Services
File Formats
Document
Management
Fields
(Meta Data)
Scan Features
Supported Scan
Destinations
C60/C70
Scan while the system is printing, copying, or
while it is transferring scan to network or fax jobs
(priority is for return of scanned originals and
printing concurrent jobs)
Up to 200 images per minute color and black-andwhite
• 600 x 600 dpi
• 400 x 400 dpi
• 300 x 300 dpi
• 200 x 200 dpi
Scan Default Resolution: 200 dpi
145K Feeds
11 x 17 in. / A3
• Support 250 scan templates
• Create Xerox® CentreWare® IS scan templates
and share via device cloning to other MFPs
• Confirmation sheet options
FTP, SMB, NetWare, HTTP, HTTPS
• Color TIFF (TIFF 6.0 or TTN2 with JPEG, LZW)
• Black-and-white TIFF (G3MH, G4 MMR
compression - single or multiple pages)
• Searchable PDF and PDF/A (MRC, JPEG, G3
MH, G4 MMR, JBIG 2 Huffman, JBIG
Arithmetic Compression, Deflate (for
Black-and-white and within MRC))
• JPEG
• XPS
• Encrypted / Password Protected PDF (Network
Scan Templates only)
• Linearized PDF
Features only available in Network Scan to File
Templates:
• 1 to 6 user programmable metadata fields per
network scan to file templates and unlimited
fields within the template
− Metadata field consists of field name,
default value and other configurations
• Customized fields viewed on user interface for
variable data input
Standard:
Scan to Network, Scan to Email, Scan to Folder,
Scan to SMB or FTP, Text Searchable PDF,
PDF/A, XPS, PDF, JPEG, TIFF, Scan to USB
Memory Device, Single Touch Scanning, TWAIN
Support
• Mixed Size Originals
• Compression Quality/File Size Control
• Original Type (Photo and Text, Photo, Text,
Map, Newspaper / Magazine)
• Auto Background and Shadow Suppression
• Size for Size (for mixed size originals)
• TWAIN Driver
• Edge Erase
• Reduction/Enlargement
Standard:
• Scan to USB Drive
• Scan to Email
• Scan to PC / Server Client (SMB or FTP)
• Scan to Mailbox
Customer Expectation and Installation Guide
C60/C70
• Scan to Home
• Scan to Application through EIP
Optional:
• Xerox® Scan to PC Desktop® (Professional and
SE)
• ScanFlowStore®
• Various Xerox® Business Innovation Partner
Solutions
Authentication
Supports Kerberos (UNIX / Windows Server)
SMB (Windows Server)
LDAP
Xerox Secure Access Unified ID System®
Locally on device
Convenience Authentication via Magstripe,
Proximity and Smart Card (CAC / PIV and
.NET) readers
Scan to Email
Directory Access:
Features
• Address list via LDAP (Windows Archive
(Standard)
Directory, Exchange, Notes, Domino)
• Importing of address list (comma-separated file
format)
• Email signatures (6 lines each of 128 character
max), email message body (user configurable),
email CWIS confirmation sheet options
• Scan to Email S/MIME Encryption
• Email Signing (requires Smart Card option)
• Auto send to self
Network Scanning – Software Solutions
Xerox® Scan to
A desktop offering that provides advanced
PC Desktop®
document imaging, archiving, editing and
Professional
organization tools:
(Optional)
• PaperPort Professional image viewing and file
management software
− Complete PDF functionality
− Secure PDF workflow of all scanning
applications
• OmniPage Pro Office (for desktop/client
installation) – Professional OCR software for
digital archiving and document conversion
• Image Retriever – provides fully automated
retrieval of scanned images direct from a scan
enabled Xerox® C60/C70 to individual
desktops. Also includes email inbox polling
capability
Fax
•
•
•
•
•
•
C60/C70
Fax Features
Standard:
• Internet Fax, Fax Build Job, Network Server
Fax Enablement (solutions available through
various Xerox® Business Innovation Partners)
Optional:
• Fax Forward to Email or SMB, Walk-up Fax
(one-line, two line and three-line options,
includes LAN Fax)
Network Server Fax Features
Compatibility
ITU (CCITT) group 3
Various Xerox® Business Innovation Partner
Solutions
Max Scan Area
11 x 17 in. / A3
Send Features
• One- or Two-sided Scanning (up to 11 x 17 in. /
A3)
• Add to Send List (50 numbers maximum)
• Build Job, Speed Dial, Delay Send (specific
time) Original Type (photo, text or photo and
text)
Print Features
• One- or Two-sided Printing
5
Xerox Color ® C60/C70
Detailed Specifications
Fax
C60/C70
Security
Transmission
Resolution
• Superfine: 400 x 200 dpi (Scan at 600 x 600
dpi)
• Fine: 200 x 200 dpi
• Standard: 200 x 100 dpi
Internet Fax Features
Compatibility
• Direct print-ready document transmission to
remote Internet Fax machines or email clients
(SMTP)
• Reception and automatic printout of documents
sent via email from remote Internet Fax
machines or email clients
Address
• Send: Multi-page TIFF, PDF, PDF/A
Directory Access • Receive: TIFF, MTIFF, PDF, PDF/A, PS, text,
PCL, PRN, JPEG
Resolution
• 100 x 100dpi to 600 x 600 dpi
• Bit Depth: 1-bit (black-and-white)
SMTP (send), POP3 (receive)
Network
Protocols
Compliance
ITU-T T.37 compliant
Walk-up Fax Features
(Optional (Customer-installable) – 1 and 2 lines)
Compatibility
ITU (CCITT) group 3
Compression /
MH/G3, MMR/SG3
Speed
Resolution
• Standard: 200 x 100 dpi
• Fine: 200 x 200 dpi
• Superfine: 600 x 600 dpi
•
Fax Send
• LAN Fax (fax from print driver)
Features
• Auto Fax Transmission Reduction
•
•
•
•
•
Page-by-page Job Status at the Machine
Delay Start, Build Job, Favorites
Automatic Memory Resend
Automatic Cover Sheets
Device Address Book (up to 1,000 contacts)
Fax Receive
Features
•
•
•
•
•
•
•
One- or Two-sided Printing
Receive Print Mode – Manual / Auto
Output Tray Selection
Up to 500 Password Protected Mailboxes
Secure Receive
Receive Timestamp
Auto Answer Delay
Fax Forward
• Forward to Email or SMB Location
• Fax Forward on Receive Only
Fax Reports
• Configuration Report, Inbound Fax SPAM list,
Address book, Scan Fax Configuration, Domain
Filter List, Fax Comment List, Folder Selector
List, VOIP Gateway List
Auto Dialing
• Speed Dials: 2,000 total (one- or two-line
options)
• Group Dials: Up to 50 groups with up to 400
recipients per group (one- or two-line options)
• Auto Redial: Up to 5 attempts (per country
requirements)
• 1 to 15 minute intervals(1 min by default)
• Batch send (up to memory capacity)
Security
Security
Features
C60/C70
Standard:
• HDD Overwrite, 256-bit Encryption (FIPS 140-2
compliant), Common Criteria Certification (ISO
Customer Expectation and Installation Guide
C60/C70
15408), Secure Print, Secure Fax, Secure Scan,
Secure, Email, Network Authentication, SSL/TLS
SNMPv3, Audit Log, Access Controls, User
Permissions
Optional:
• Xerox Secure Access Unified ID System® with
Follow-You Printing®, Smart Card Enablement Kit
(CAC/PIV/.NET)
• Staple
• Secure Print
Secure Access
Unified ID
System®
(Optional)
• Expanded Authentication
− Network authentication to access device
and/or device services via- Kerberos (UNIX /
Windows Server 2003 / Windows Server
2008), SMB (Windows 2000 / Windows Server
2003 / Windows Server 2008), , LDAP
− Xerox Secure Access Unified ID System®
− Local Authentication (internal database)
− Smart Card authentication -144k CAC / PIV
Card Support (2048 bit certificate key) /.NET
• Secure Data
− Digitally signed PDF (when using Smart Card
authentication)
− Encrypted Scan to Email
− Encrypted Password Protected PDF (when
using Network Scan Templates only)
− Secure Print (up to 12 digit PIN Immediate
Image Overwrite
− On Demand Image Overwrite (Scheduled,
Manual), includes sanitation of unused area of
disk
− FIPS 140-2 256 bit Hard Disk Encryption
• Expanded Authorization
− SA access based on network credentials
− Authorization per user per service
− User Permissions required to access Print and
Print Features (e.g. color access, or time
restrictions) reflects in the print driver
• IP Filter, IPsec, IPv6, SSL, SNMPv3, HTTPs,
802.1X,
• Device Security
− Disablement of i USB ports, Audit Log, Hide
Print Job Names,
• Xerox Secure Access Unified ID System®
integrates your Xerox® multifunction systems with
your existing employee/student ID PIN or badge
providing a flexible and convenient authentication
system. Allow your staff, employees or students to
send documents to a centralized print server.
Then, at any multifunction printer on the network,
they’ll simply log in with a swipe of their magnetic
or proximity ID card or their PIN to securely print
their job.
• For more information, go to
www.office.xerox.com/software-solutions
Accounting
Features
C60/C70
Xerox® Standard Accounting (Copy, Print, Scan, Fax, Email)
Tracking
Copy, Print, Fax, Scan and Email usage
Accounting
• Up to 9.999 User accounts (User ID)
•
Features
• Administrator can manage the feature via the
Web User Interface or device control panel in
tools
•
Optional
Equitrac Office®, Equitrac Professional®, YSoft®
Accounting
SafeQ®, other network accounting solutions
Features
available through various Xerox® Business
Innovation Partners
6
Xerox Color ® C60/C70
Detailed Specifications
Standard
Network
Accounting –
Third Party
Enablement
Enhanced network accounting with up to the minute
data on how the system is being used
• Comprehensive management and enterprise
scale tracking and reporting of device usage of
copy, print, scan and server fax
• Numerous solutions are available through Xerox®
Alliance Partners. For details visit www.xerox.com
• Security enhancements with the addition of
HTTPS protocol support
• WorkCentre requests account authentication from
third party server enabling larger databases of
users and accounts
• Accept Authentication Login at control panel and
pass to third party Networking Account
• Interface with third party accounting terminal for
accounting user interface
Device Management
Features
Management
Support
Xerox®
CentreWare®
Web
Xerox® Device
Manager
Xerox® Device
Types for SAP
Environment
Xerox® SAP R/3
Intelligent
Barcode Utility
(optional)
C60/C70
• SNMP Version 1. SNMP Version 2c and SNMP
Version 3 trap over TCP/IP and IP
• MIB access (IETF-MIBII RFC 1213), Host
Resources
• MIB RFC 2790, Printer MIB RFC 1759 v.2
A Web-based server application for network
administrators that permits Web browser-based
device management from any workstation, whether
running Windows, UNIX or any other operating
system:
• Works with any SNMP-managed printer from
any manufacturer.
• Provides help with device discovery and
installation, health checks and troubleshooting,
and device upgrades, as well as basic
accounting and asset management.
• Requires Windows XP, Vista or Windows 7 and
Internet Explorer 6.0 and higher.
• CentreWare Integration available for Tivoli®
NetView®, Unicenter TNG®, Microsoft
Management Console (MMC), HP® OpenView®
Xerox® Device Manager collects and manages the
data that drives fact-based decisions for your
enterprise device management environment. It is a
single tool to install print queues and configure,
manage, monitor and report on both networked and
locally connected devices – regardless of vendor –
across your enterprise.
Xerox® Device Manager provides:
• Device monitoring and troubleshooting
• Extensive reporting and discovery of new
devices
• Usage collection, chargeback and billing
capabilities
• Xerox, together with SAP through our Gold-level
membership in the SAP Printer Vendor Program,
provides seamless connectivity between SAP
systems and your Xerox® printers and MFPs.
And as an SAP customer you benefit from
having SAP-certified Xerox® device types
available right from SAP’s online delivery model.
SAP-certified device types for Xerox® printers
and MFPs are available to download.
www.office.xerox.com/software-solutions
• Provides built-in process intelligence that allows
the printing of barcodes on any appropriately
configured PostScript printer in specific versions
of SAP environment and within Latin-1
Customer Expectation and Installation Guide
Features
C60/C70
(ISO8859-1) SAP system code pages only. Used
in conjunction with Xerox® PostScript Device
Types for SAP environment and Xerox® Font
Center Barcode Fonts. Information available at
www.office.xerox.com/software-solutions
Xerox® Barcode
Pro PS
(optional)
• Enables intelligent PostScript printing on Xerox®
multifunction systems by storing Xerox®
software, as well as, the barcode fonts on the
printer hard disk. Enables the printing of
barcodes from any application (SAP client or
mainframe) that supports PostScript printing.
Information available at
www.office.xerox.com/software-solutions
CentreWare Internet Services – Integrated Web Pages Provided by the
Device
Device Status
Web server embedded in Network Controller:
• Tray status/contents
• Consumables status
• Alerts
Job Submission
• Print ready files: PS, PCL, TIFF, PDF, JPG, XPS
Administration
Browsers
Support
Languages
Supported
Remote Services
Meter Assistant®
Supplies
Assistant®
Maintenance
Assistant®
• Output feature selection (2-sided, output color,
collate, staple, hole punch, output destination)
• Delivery options (Immediate, sample set, delay
and secure
Allows simple, remote installation setting of
configuration options and management of the
device
• Internet Explorer 6.x, 7.x, 8.x, 9.x, 10.x, 11.x
• Safari 5.x,6.x, 7.x
Install print / scan drivers and online support
available via web page
International English, International French, Italian,
German, International Spanish, Dutch, Brazilian
Portuguese, Swedish, Norwegian, Danish, Finnish
or Russian
• Automates the process of collecting and
submitting meter reads for tracking and billing of
Xerox® device usage.
• Eliminates the need for time-consuming enduser involvement and ensures that meter reads
are submitted to Xerox on time.
Automatically orders supplies for Xerox® output
devices based on actual usage, eliminating the
need to manually manage supplies inventory.
Offers a fast (and free) way to resolve potential
issues and receive assistance and automate the
troubleshooting/repair process. Diagnostic data is
sent to Xerox, allowing for problems to be solved
faster with increased uptime.
Controller/Print Server
*Note: For specific DFE Controller information please refer
to the appropriate separate controller CED.
Controller
C60/C70
Processor
Memory
System Disk
Display
PDLS
1.0 GHz Dual-core
4 GB system plus 1 GB page memory
320 GB
10.4 Inch UI
Page Description Languages:
• Adobe® PostScript® 3™, PDF, PCL® 5c / PCL 6,
XML Paper Specification (XPS®) (Optional)
Operating
Systems
• Microsoft® Windows® XP (32- and 64-bit)
• Windows Server 2003 (32- and 64-bit)
• Windows Server 2008 (32- and 64-bit)
7
Xerox Color ® C60/C70
Detailed Specifications
Controller
Features
Connectivity
Controller
C60/C70
•
•
•
•
•
•
•
•
•
•
•
•
•
C60/C70
9100, IPv4/IPv6, WSD
• Microsoft Windows Networking over IP
• Bonjour®
• IPv6
• Most protocols not in use can be disabled
Administrative Protocols:
• DHCP, BOOTP, SNMP, WINS, SLP® v2, HTTP,
HTTPS, DHCP Autonet, SSL/TLS, NTP, DNS,
SSDP RARP
Windows Server 2012
Windows Vista (32- and 64-bit)
Windows 7 (32- and 64-bit)
Windows 8 (32- and 64-bit)
Mac OS 10.7 and above
Solaris® 9, 10
HP-UX® 11v2
IBM® AIX® 5
Redhat® Fedora® Core 15-17
Redhat Enterprise 4 and 5
openSUSE® 11 and 12
Ubuntu®
Unix®
Fonts
• PCL5/6: 82 PostScript 3: 136:
• Unified Address Book
• Configuration Cloning
Network Protocols:
• TCP/IP: HTTP/HTTPS, Internet Printing
Protocol, LPR/LPD, Raw Socket Printing/Port
System Productivity
The printer may cycle down between each page depending on job complexity.
Overall system performance (‘Click to Clunk’ time) is primarily dependent upon the software applications and network environment being used.
Rasterizing (RIP-ing) is only a small fraction of Click to Clunk time.
The continuous print speeds shown in table below are for feeds from Trays 1 – 4. Speed from Bypass Tray (5) will be reduced by 10-20%.
Xerox Color C60 Speed
Simplex Productivity (ppm)
Size
Xerox Color C70 Speed
Weight
Color
B/W
Color
B/W
8.5x11 (A4) LEF
Plain, 18lb – 28lb (64gsm – 105gsm)
60
65
70
75
11x17 (A3)
Plain, 18lb – 28lb (64gsm – 105gsm)
30
33
35
37
12 x 18 (SRA3)
Plain, 18lb – 28lb (64gsm – 105gsm)
27
29
30
33
8.5x11 (A4) (Tray 5)
Transparency
18*
40
18*
40
8.5x11, (A4) LEF
Heavyweight 1 28lb – 90lb Index, (106gsm –
176gsm)
43
65
50
75
11x17 (A3)
Heavyweight 1 28lb – 90lb Index, (106gsm –
176gsm)
21
33
25
37
12 x 18 (SRA3)
Heavyweight 1 28lb – 90lb Index, (106gsm –
176gsm)
19
29
19
33
8.5x11 (A4) LEF
Coated 1 80lb – 100lb Text (105gsm – 150gsm)
43
43
50
50
11x17 (A3)
Coated 1 80lb – 100lb Text (105gsm – 150gsm)
21
21
25
25
12 x 18 (SRA3)
Coated 1 80lb – 100lb Text (105gsm – 150gsm)
19
19
19
19
8.5x11 (A4 LEF)
Heavyweight 2 65lb Cover – 80lb Cover (177gsm –
220gsm)
30
43
35
50
11x17 (A3)
Heavyweight 2 65lb – 80lb Cover (177gsm –
220gsm)
14
21
17
25
12 x 18 (SRA3)
Heavyweight 2 65lb – 80lb Cover (177gsm –
220gsm)
12
19
12
19
8.5x11 (A4 LEF)
Coated 2 65lb – 80lb Cover (177gsm – 220gsm)
30
30
35
35
11x17 (A3)
Coated 2 65lb – 80lb Cover (177gsm – 220gsm)
14
14
17
17
12 x 18 (SRA3)
Coated 2 65lb – 80lb Cover (177gsm – 220gsm)
12
12
12
12
Customer Expectation and Installation Guide
8
Xerox Color ® C60/C70
Detailed Specifications
Simplex Productivity (ppm)
Size
Weight
Xerox Color C60 Speed
Xerox Color C70 Speed
Tab Stock 1 (Tray 5)
Pre-cut Tabs 28lb – 90lb Index, (106gsm –
176gsm)
24
33
24
35
Tab Stock 2 (Tray 5)
Pre-cut Tabs Heavyweight 65lb Cover – 80lb
Cover (177gsm – 220gsm)
17
24
17
24
* Media heavier than 220 gsm (80 lb. Cover) needs to be fed through Tray 5 or the optional OHCF.
Image Quality adjustments can decrease productivity during a run. Finisher options may also impact productivity.
Xerox Color C60 Speed
Duplex Productivity (ppm)
Size
Weight
Xerox Color C70 Speed
Color
B/W
Color
B/W
8.5x11 (A4) LEF
Plain, 18lb – 28lb (64gsm – 105gsm)
30
32
35
37
11x17 (A3)
Plain, 18lb – 28lb (64gsm – 105gsm)
15
16
17
18
12 x 18 (SRA3)
Plain, 18lb – 28lb (64gsm – 105gsm)
13
14
15
16
8.5x11 (A4) LEF
Heavyweight 1 28lb – 90lb Index, (106gsm – 176gsm)
21
32
25
37
11x17 (A3)
Heavyweight 1 28lb – 90lb Index, (106gsm – 176gsm)
10
16
12
18
12 x 18 (SRA3)
Heavyweight 1 28lb – 90lb Index, (106gsm – 176gsm)
9
14
9
16
8.5x11 (A4) LEF
Coated 1 80lb – 100lb Text (105gsm – 150gsm)
21
21
25
25
11x17 (A3)
Coated 1 80lb – 100lb Text (105gsm – 150gsm)
10
10
12
12
12 x 18 (SRA3)
Coated 1 80lb – 100lb Text (105gsm – 150gsm)
9
9
9
9
8.5x11 (A4 LEF)
Heavyweight 2 65lb Cover – 80lb Cover (177gsm –
220gsm)
15
21
17
25
11x17 (A3)
Heavyweight 2 65lb – 80lb Cover (177gsm – 220gsm)
7
10
8
12
12x18 (SRA3)
Heavyweight 2 65lb – 80lb Cover (177gsm – 220gsm)
6
9
6
9
8.5x11 (A4 LEF)
Coated 2 65lb – 80lb Cover (177gsm – 220gsm)
15
15
17
17
11x17 (A3)
Coated 2 65lb – 80lb Cover (177gsm – 220gsm)
7
7
8
8
12x18 (SRA3)
Coated 2 65lb – 80lb Cover (177gsm – 220gsm)
6
6
6
6
* Media heavier than 220 gsm (80 lb. Cover) needs to be fed through Tray 5 or the optional OHCF.
Image Quality adjustments can decrease productivity during a run. Finisher options may also impact productivity.
Customer Expectation and Installation Guide
9
Xerox Color ® C60/C70
Detailed Specifications
Feeding Specifications
Automatic Document Feeder
C60/C70
Single Pass Duplex Automatic Document Feeder
Capacity
Speed
250 sheets (Single-pass DADF)
• up to 200 images per minute
Paper Sizes
Sensed
Weights
5.5 x 8.5 in. to 11 x 17 in. / A5 to A3
16 lb. bond to 32 lb. bond / 50 gsm to 160 gsm
Bypass Tray 5
Capacity
Standard
Sizes
Custom
Sizes
Weights
Trays 1 and 2
Tray 5: 250 sheets of 20lb/80gsm
Min: postcards
Max: SRA3 SEF, 12x18” SEF
Min: 3.9x5.8”/100x148mm
Max: 13 x 19.2/330x488mm SEF
18 lb. bond to 80lb. cover / 64 to 216 gsm with additional 221-300gsm capability
Capacity
Standard
Sizes
Trays 1-2: 500 sheets each;
Tray 1:
Min: A5 SEF, 8.5x5.5” SEF
Max: SRA3 SEF, 12x18” SEF
Trays 2: Min: A5 SEF, 8.5x5.5” SEF
Max: A3 SEF, 11x17 SEF
Tray 1:
Min: 5.5x7.2”/140 x 182mm
Max: 13x18”/320 x 458mm
Trays 2: Min: 5.5 x 7.2”/140 x 182mm
Max: 11x17/297 x 432mm
Plain:
18lb – 28lb
(64 – 105gsm)
Heavyweight 1:
28lb – 90lb index
(106– 176gsm)
Coated 1:
106-150gsm
Heavyweight 2:
65lb cover – 80lb cover
Custom
Sizes
Weights
Coated 2:
(151-220gsm)
(177 – 220gsm)
Heavyweight 3:
(221 –256gsm)
*When feeding HW2,HW3,and/or coated stock it is highly recommended to feed from tray 5 (Bypass) or trays 6/7 (OHCF)
due to degraded feeding performance of these papers through trays 1-2.
Trays 3&4 (Total 2,010 sheets)
(Available with all configurations)
Capacityv
Tray 3: 870 sheets
Tray 4: 1140 sheets
Standard
Tray 3/4: B5 LEF or 7.25”x10.5”LEF
Sizes
A4 LEF,8.5” x 11” LEF
Same as tray 1&2
Weights
18 lb. bond to 80 lb. cover uncoated/ (64to 256 gsm) / Coated (106-220gsm)
*When feeding HW2,HW3,and/or coated stock it is highly recommended to feed from tray 5 (Bypass) or trays 6/7 (OHCF)
due to degraded feeding performance of these papers through trays 3-4.
OHCF Trays 6&7(Total 4,000 sheets)
(Available with all configurations)
Capacityv
Tray 6: 2000 sheets
Tray 7: 2000 sheets
Standard
1 Tray OHCF: 7.2 x 10 in. / 182 x 250 mm (B5) to 13 x19.2 in. / 330 x 488 mm (SRA3);
Sizes
2 Tray OHCF:4 x 6 in. /102 x 152 mm to 13 x 19.2 in. / 330 x 488 mm (SRA3)
• One or two tray module: 2,000 sheets / 4,000 sheets
• Small Media support included with 2 Tray OHCF(Must use small media guide when width is less than 182mm)
Customer Expectation and Installation Guide
10
Xerox Color ® C60/C70
Detailed Specifications
• Envelope and small media feeder
• 65 lb. cover / 176 gsm auto duplex for all stocks
• 80 lb. / 220 gsm auto duplex for most stocks
(Letter / A4, Tabloid / A3)
• 110 lb. cover / 300 gsm simplex and manual duplex
for all stocks
Weights
Envelopes
The XeroxC60/C70 currently supports running the following envelope types through Tray 5. Depending on thickness, up to 50 envelopes can be loaded.
Envelopes can also be fed from OHCF Trays 6 & 7 with the small media side guide installed. Stack heights in these trays may need to be reduced if
jams are encountered with various envelope types.
Envelope Type/Size
Feed Direction Flap Open
Monarch
3.87in x 7.50in
98.4 X 190.5mm
Commercial #10
4.12in x 9.50in
104.8mm X 241.3mm
Envelope: Chou-kei3
120.0mm X 235.0mm
Envelope: Kaku-ga
240.0mm X 332.0mm
Envelope C4
229.0mm X 324.0mm
Envelope C5
162.0mm X 229.0mm
LEF
LEF
UI Tools Input
Custom Paper Size
7.5in x 6.7in
190.0mm X 170.0 mm
Custom Paper Size
9.45in x 6.81in
240.0mm X 173.0 mm
SEF
Default Input Size when customized in tools
SEF
Default Input Size when customized in tools
SEF
Default Input Size when customized in tools
SEF
Default Input Size when customized in tools
**Note: Please be aware that envelopes are not intended to be a primary media for this product.
Envelope Feeding Guidelines/Limitations:
•
•
•
•
•
•
•
•
•
•
•
•
Envelope should be run using media type “heavyweight 2”, “face-up” selected.
Envelopes should be run open flap to the left (trail edge) which provides the best wrinkle free results. It is not recommended to run closed flap
because it is more susceptible to wrinkles, creases, light image, and the flap sealing during the run.
North American envelopes will only run in Custom Size Mode with manually inputting the size indicated above. These dimensions include a
commercial style open flap (specific dimensions for the envelopes being used should be entered, including flap size).
Some European envelope sizes can be programmed as a default on the UI in Tools.
Envelope Basis Weight must be between 75 to 90 GSM.
Bypass tray can handle SEF stacks of 30 – 50 envelopes.
Stacking capacity in SCT varies from approx. 30 to 100 envelopes.
Frequent jams or damage may occur with certain size envelopes & flap designs.
Image Quality may be compromised when running various flap & seam designs.
Maximum reliable LEF / flap open exit tray stack height is less than 10 envelopes.
Maximum reliable SEF stack height in SCT is 30 – 50 envelopes
Other variables that can affect envelope feeding performance:
•
Envelope brand, size, weight, and seam configuration.
•
Flap design, size, and shape.
•
Orientation of Flap in feed trays – Inboard or Outboard.
•
Storage / environmental conditions, and age of envelopes.
•
Output devices used.
Customer Expectation and Installation Guide
11
Xerox Color ® C60/C70
Detailed Specifications
Finishing Specifications
Simple Catch Tray (SCT)
Capacity
• Unavailable in North America
• The Simple Catch Tray (SCT) can accommodate up to 500 sheets of 13’x19”/SRA3 20lb Bond/80 gsm media.
Offsetting Catch Tray OCT
Capacity
• The Offsetting Catch Tray (OCT) can accommodate up to 500 sheets of 13”x19” / SRA3 20lb bond/80gsm
Media.
Business Ready Finisher
Capacity
•
Top Tray will handle up to 500 sheets of 8.5”x11” / A4 20lb Bond/80 gsm uncoated/coated paper and can
accommodate up to 13” x 19” / SRA3 size media 64-300gsm. (Note: heavier paperweight will result in
reduced output tray capacity).
•
Stacker output tray will handle up to 3,000 sheets of 8.5” x 11” / A4 20lb Bond/80 gsm uncoated/coated
paper and can accommodate up to 13” x 19” / SRA3 size media 64-300gsm. (Note: larger media will result
in reduced output tray capacity).
Weights
16 lb bond to 110 lb cover / 64 to 300 gsm
Multi-position
Stapling
• Multi-position stapling of up to 50 sheets uncoated paper and 15 sheets coated paper with up to 50 sheets
available to the Stacker tray.
• Quad stitch stapling available through EFI (stand alone and bustled), and FFPS bustled DFE’s only; for
8.5x11/A4, 11x17/A3
Hole Punch
North
America:
Europe:
• 2-3 Hole Punch
• 2-4 Hole Punch
• Swedish Hole Punch
Business Ready Finisher with Booklet Maker
Capacity
•
•
Weights
Multi-position
Stapling
Top Tray will handle up to 500 sheets of 8.5”x11” / A4 20lb Bond/80 gsm uncoated/coated paper and can
accommodate up to 13”x19” / SRA3 size media 64-300gsm. (Note: heavier paperweight will result in
reduced output tray capacity).
Stacker output tray will handle up to 1,500 sheets of 8.5”x11” / A4 20lb Bond/80 gsm uncoated/coated
paper and can accommodate up to 13”x19” / SRA3 size media 64-300gsm. (Note: larger media and
heavier media will result in reduced output tray capacity).
16 lb. bond to 110 lb. cover / 64 to 300 gsm
• Multi-position stapling of up to 50 sheets uncoated paper and 15 sheets coated paper with up to 50 sheets
available to the Stacker tray.
• Quad stitch stapling available through EFI (stand alone and bustled), and FFPS bustled DFE’s only; for
8.5x11/A4, 11x17/A3
Hole Punch
North America:
Europe:
• 2-3 Hole Punch
• 2-4 Hole Punch
• Swedish Hole Punch
Booklet
Making
capacity
• The Booklet Tray will handle up to 20 sets of a maximum of 16 stapled sheets per set and can accommodate
up to 13”x18” / SRA3 media. (Note: larger media will result in reduced output tray capacity).
Booklet
Making Sizes
• Booklet stitching available with paper sizes of 8.5”x 11”SEF, 8.5”x13”SEF, 8.5”x14”SEF, 9”x11”SEF,
11”X15”SEF, 11”x17”SEF, 12“x18”SEF, 13”x18”SEF, A4SEF, B4SEF, A3SEF, SRA3SEF. Booklets up to 16
sheets of non-coated 24lb/90 gsm or 14 sheets of non-coated 20lb/80 gsm plus 1 non-coated cover
between 90-176 gsm
Saddle- Stitch
Stapling
2-16 sheets / 8-64 page booklet
18 lb. bond to 24 lb. bond / 64 to 90gsm
• Booklet saddle stitching available with Short Edge Feed (SEF) paper sizes 8.5x11”, 8.5x13”, 8.5x14”,
11x17”,”, A4, A3,. The Finisher Booklet Maker Tray can accommodate up to 20 sets of up to 16 sheets per
set when stapled. Booklets can consist of 2 to 16 sheets of 20b (80 gsm)
• For coated/uncoated stocks the Business Ready Finisher with booklet maker supports booklet sizes of up to 7
sheets of 106-176 gsm, and 5 uncoated sheets of 177-220gsm.
• Bi-Fold 5 sheets
Customer Expectation and Installation Guide
12
Xerox Color ® C60/C70
Detailed Specifications
C/Z Folder (Optional for BR Finisher and BR Finisher with Booklet Maker)
Folder option provide three different folds: C Fold, Z Fold and Z Half Fold
•
Folding limited to 16-24 #/60-90gsm media only
•
C Fold and Z Fold:
Letter/ A4 paper sizes only
Output destination to output tray only
Envelope tray capacity- 30 sheets
•
Z Half fold:
Tabloid & A3 paper sizes only
Output destination to stacker tray or top tray
Standard Finisher (appears as Light Production Finisher in some geographies; (Xerox Europe)
Capacity
Top Tray will handle up to 500 sheets of 8.5”x11” / A4 20lb Bond/80 gsm uncoated or coated paper and
can accommodate up to 13”x19” / SRA3 size media 64-300gsm. (Note: heavier paperweight will result in
reduced output tray capacity).
Stacker output tray will handle up to 3,000 sheets of 8.5”x11” / A4 20lb Bond/80 gsm uncoated or coated
paper and can accommodate up to 13”x19” / SRA3 size media 64-300gsm. (Note: larger media will result
in reduced output tray capacity).
The Standard Finisher has a standard Interposer unit (used to insert pre-printed stock into finished sets w/o
having to go through engine) with the following specs:
•
Tray Capacity: 200 sheets of up to 128gsm
•
Paper Weights: 64 to 220gsm (HW2), Tab-1, holed paper.
•
Labels, coated media & envelopes are not supported
•
Supported Sizes: Letter L, Ledger, A3, A4 L, Legal/ 8.5x12.5/ 215x315, B5 S/Exec S, Letter S/
8x10 S, B5 L/ 8x10 L, Letter Cover L/ A4 Cover L, 11x15, B4 (1 sheet of up to 220gsm (HW2),
allowed for booklet cover)
Optional C/Z folding unit enables C/Z folding of media up to 24 lb (90 gsm).
•
•
•
•
•
•
•
•
Weights
Multi-position
Stapling
System must be interrupted to remove paper from the optional C/Z folding tray.
Optional C/Z folding tray can accommodate at least 30 sheets of 24 lb (90 gsm) uncoated media).
Supported Paper sizes are 8.5x11” (A4) SEF.
11” x17” paper can be half-Z-folded and delivered to the Top or Stack trays.
Requires the Interface Module
Requires an additional electrical receptacle (see Electrical Requirements section)
18 lb. bond to 110 lb. cover / 64 to 300 gsm
• 1- and 2-place stapling of up to 100 sheets of 20lb Bond/80 gsm uncoated or 5 sheets coated paper with100
sheets available to the Stacker tray.
• Quad stitch stapling available through EFI (stand alone and bustled), and FFPS bustled DFE’s only; for
8.5x11/A4, 11x17/A3
Hole Punch
North America:
Europe:
• 2-3 Hole Punch
• 2-4 Hole Punch
• Swedish Hole Punch
Booklet Maker Finisher (appears as Light Production Finisher with Booklet Maker or Light Production Finisher with Booklet Maker
and Folder in some geographies; (Xerox Europe)
Capacity
• Top Tray will handle up to 500 sheets of 8.5”x11” / A4 20lb Bond/80 gsm uncoated or coated paper and can
accommodate up to 13”x19” / SRA3 size media 64-300gsm. (Note: heavier paperweight will result in reduced
output tray capacity).
• Stacker output tray will handle up to 2,000 sheets of 8.5”x11” / A4 20lb Bond/80 gsm uncoated or coated
paper and can accommodate up to 13”x19” / SRA3 size media 64-300gsm. (Note: larger media will result in
reduced output tray capacity).
Optional C/Z folding unit enables C/Z folding of media up to 24 lb (90 gsm).
•
System must be interrupted to remove paper from the optional C/Z folding tray.
•
Optional C/Z folding tray can accommodate at least 30 sheets of 24 lb (90 gsm) media). Supported Paper
sizes are 8.5x11” (A4) SEF.
• 11” x17” paper can be half-Z-folded and delivered to the Top or Stack tray
The Booklet Maker Finisher has a standard Interposer unit (used to insert pre-printed stock into
finished sets w/o having to go through engine) with the following specs:
Customer Expectation and Installation Guide
13
Xerox Color ® C60/C70
Detailed Specifications
•
•
•
•
•
•
•
Weights
Multi-position
Stapling
Tray Capacity: 200 sheets of up to 128gsm
Paper Weights: 64 to 220gsm (HW2), Tab-1, holed paper.
Labels, coated media & envelopes are not supported
Supported Sizes: Letter L, Ledger, A3, A4 L, Legal/ 8.5x12.5/ 215x315, B5 S/Exec S, Letter S/ 8x10
S, B5 L/ 8x10 L, Letter Cover L/ A4 Cover L, 11x15, B4 (1 sheet of up to 220gsm (HW2), allowed for
booklet cover)
Requires the Interface Module
Requires an additional electrical receptacle (see Electrical Requirements section).
A service call is required to enable 25 sheet booklets at 75gsm paper weight.
18 lb. bond to 110 lb. cover / 64 to 300 gsm
• 1-2 place Multi-position stapling of up to 100 sheets uncoated and 5 sheets coated paper with100 sheets
available to the Stacker tray.
• Quad stitch stapling available through EFI (stand alone and bustled), and FFPS bustled DFE’s only; for
8.5x11/A4, 11x17/A3
Hole Punch
North America:
Europe:
Booklet
Making
capacity
• 2-3 Hole Punch
• 2-4 Hole Punch
• Swedish Hole Punch
• The Booklet Tray will handle up to 20 sets of a maximum of 25 uncoated sheets (20lb 75gsm)/20 sets of a
maximum 20 uncoated sheets (24lb 90gsm). The Booklet Tray will also handle10 coated/uncoated stapled
sheets per set at 106-176 gsm/ 5 uncoated stapled sheets per set at 177-220 gsm, and can accommodate up
to 13”x18” / SRA3 media. (Note: larger media will result in reduced output tray
capacity).
• Booklet saddle stitching available with Short Edge Feed (SEF) paper sizes 8.5x11”, 8.5x13”, 8.5x14”,
11x17”,”, A4, A3,. The Finisher Booklet Maker Tray can accommodate up to 20 sets of up to 25 sheets per
set when stapled. Booklets can consist of 2 to 25 sheets of 20b (80 gsm)
• Bi-Fold 5 sheets
The GBC® AdvancedPunch™ is an inline die punch that utilizes modular die sets to enable a variety of hole-punch patterns in A4
(European) or 8 ½ x 11 in (LTR) (Western Hemisphere) long-edge-fed media. Output from the GBC® AdvancedPunch™ is bound
offline.
Capacity
• The GBC® AdvancedPunch™ requires an Interface Module (IFM) as well as a Light Production C Finisher.
• Customers wishing to add the GBC® AdvancedPunch™ to their existing system can do so. Upgrade kits may
be required.
• The GBC® AdvancedPunch™ is not available for use on Advanced or Professional Finishers, or with the
Offset Catch Tray.
• GBC® AdvancedPunch™ does not work in conjunction with Z-fold, bi-fold, letter fold, multi-function finisher
punch, staple, or booklet making.
• Due to its location in the system
o
Stock from the Post Process Inserter Tray cannot be run through the GBC® AdvancedPunch™.
o
Stacking to the booklet output tray or letter fold output tray is not permitted.
o
Pre-printed Tabs cannot be punched
• The GBC® AdvancedPunch™ is supported by all color servers.
• The GBC® AdvancedPunch™ supports media from 75 to 216 gm2, coated and uncoated.
o
ProClick die supports media from 75 to 203 gm2
• The GBC® AdvancedPunch™ supports tab stock no wider than 9”; oversized tabs may be damaged..
o
Stacking may be misaligned on jobs containing tab stock; these jobs will require additional
jogging before final finishing.
• The GBC® AdvancedPunch™ is able to bypass all coated and uncoated media sizes printed on the Xerox
C60/C70 Digital Color Press.
• Hole punch position from edge of paper is not adjustable.
• Opening the door of the GBC® AdvancedPunch™ while the machine is running will cause the machine to jam
and shut down.
• Gloss coated media may not run as reliably as uncoated paper. Typically, coated papers and high area
coverage exhibit increased variability in paper handling due to lower coefficients of friction. This may result in
varied punch registration and increased jam rates.
• Punching 8 ½ x 11 duplexed coated stock using the GBC 3-hole punch (008R13072) is not recommended
due to greatly increased paper jams.
• Pre drilled stock LEF is not supported by The GBC® AdvancedPunch™, however predrilled stock may be run
using SEF
• Due to the nature of punching holes, each punched sheet is slightly deformed, and when stacked, the edge
Customer Expectation and Installation Guide
14
Xerox Color ® C60/C70
Detailed Specifications
•
•
•
•
•
•
•
•
•
with the holes will have an increased height as compared to the non-punched edge.
o
Reduced stack quality may be experienced due to variability in the punch hole formation.
o
The stack height can be effected by many factors, such as: paper type, quality, weight and
curl, as well as die type, age and condition. Paper curl is best when it has a slight downward
curl on the edges. This can be adjusted by the operator while running prints.
A4 and LTR punch units are not the same; therefore, A4 and LTR die sets are not interchangeable.
The LTR punch unit will be shipped with the 19-hole punch die.
The A4 unit will ship with the 21-hole punch die.
Additional punch dies are available for order (see below)
Up to 3 additional die sets can be stored inside the GBC® AdvancedPunch™.
Punch Dies
The GBC® AdvancedPunch™ is capable of punching a variety of hole-punch patterns by simply changing the
punch die. Punch dies can be changed in seconds without tools. The punch dies currently available are listed
below. Each die set has a 90 day warranty from date of purchase.
In the Western Hemisphere (8 ½ x 11 inch) punch dies are ordered using the Supplies ordering process; in
Europe (A4) punches are ordered through sales representatives; please check for availability.
A4 and Letter version die sets are not interchangeable.
Please note: Punch die life will be increased if the wick material is lightly oiled every 50,000 punch cycles
(approximately every month) with quality machine oil such as 3-in-1 Oil. Small deposits of oil will be observed
around the perimeter of the punched holes until the excess oil is absorbed (usually within 20 sheets).
8 1/2 in. x 11 in. Punch Dies
Customer Expectation and Installation Guide
15
Xerox Color ® C60/C70
Detailed Specifications
A4 Punch Dies
SquareFold® Trimmer Module (Optional)
Overview
Operation
•
The SquareFold® Trimmer Module is an optional piece of equipment that flattens the spine of the
booklet to make it lay flat and trims the face of the booklet. It requires the Light Production C
Finisher with Booklet Maker (with or without the C-Z Folder) that has upgraded software and
hardware. The SquareFold® Trimmer Module is a fully-integrated device, controlled through the
print engine UI.
•
The SquareFold® Trimmer Module is supported by all color servers.
•
The SquareFold® Trimmer Module can be added to an existing Light Production C Finisher through
an available upgrade kit.
•
•
•
•
•
•
•
Configuration
The SquareFold® Trimmer Module is located after the Light Production C Finisher and performs as
follows:
Receives the booklet from the booklet unit
Transports the received booklet to the square fold unit to flatten the spine of the booklet and then to
the trimmer unit to trim the face of the booklet
Deposits the finished booklet to the booklet tray.
The SquareFold® Trimmer Module is also able to face-trim without square-folding
All output from the Light Production C Finisher (Booklet Maker Finisher) can be passed through,
square-folded, trimmed, or both squared-folded and trimmed
This includes custom sizes from 210x297.4mm – 330.2x457.2mm (8.5x11 SEF Letter through
13x18)
Customer Expectation and Installation Guide
16
Xerox Color ® C60/C70
Detailed Specifications
Auto Recognition of SquareFold® Trimmer Module
When the SquareFold® Trimmer Module is docked to the Light Production C Finisher via cable, the
finisher automatically recognizes that the SquareFold® Trimmer Module is installed.
Square-folding feature: flattens the spine (stapled side) of the booklet.
Trimming feature: trims the face of the saddle-stapled or bi-folded (single-folded) sheets of paper.
•
•
•
•
Convenience Stapler (Optional - Includes Work Surface)
Capacity
50-sheet stapling
• 5,000 staples
• Requires a separate outlet
Media and Substrate
For more detailed information on throughput materials, please refer to your local Xerox Sales Representative.
• Recommended paper to maximize image quality and product reliability is Xerox Color Xpressions Select 24lb or Xerox Colotech+ 90gsm (smooth
bright white paper). This paper is specifically designed to maximize image quality and machine performance over a wide range of environmental
conditions.
• Using coated (e.g., gloss, matte coated or photo finished / proofing) and/ or Cardstock (i.e., >90lb Index / 164 gsm) stock may result in degraded
reliability performance. Customers using these materials exclusively or extensively will see decreased performance as it relates to image quality and
product reliability.
• Attempts to feed heavier than recommended paper stocks, and/or misuse of the media settings, may cause machine damage or poor image quality.
Using media at run modes other than that recommended for the grade may cause poor image quality and machine damage.
• Envelope printing should not be used as a primary application
• Envelopes without windows are supported through the bypass tray in sizes Monarch, DL, C5, and No 10 (other custom sizes are supported as well).
Envelope feeding reliability is highly dependent on the envelope used and the area coverage of the image being affixed to the envelope.
• Specialty media may not provide optimum image quality at the extremes of the environmental range
Transparencies
• Transparencies are supported from Tray 5 (Bypass) for clear and white stripe varieties and from Tray 2 for paper backed variety only.
• Use of other transparencies may cause machine damage and result in excessive service
Xerox Sustainability
Environmental Features
• The C60/C70 series delivers cutting-edge reductions in energy consumption.
• Conserve Energy with Green Technologies
− Emulsion Aggregate ( EA) Toner: With ultra low-melt technology achieves minimum fusing temperature lower than conventional toner for even
more energy savings and brilliant glossy output even on ordinary paper.
− Induction heating: The newly developed, heat-efficient IH fuser does not require preheating, which helps reduce power consumption in standby
mode by 44% compared to a resistance heating device. Plus, the device recovers from sleep mode in less than 10 seconds.
− LED scanner: The power consumption of the scanner using LED lighting is 1/3 of traditional scanners using fluorescent lamps.
• Manage Resource Usage and Print Responsibly
− Energy Management. With Cisco EnergyWise, enabled by Xerox Power MIB (Management Information Base), you can control, manage and
report your device’s power consumption information, and set optimal power states and timeout intervals.
− Earth-smart printing. Innovative new Earth Smart feature allows you to choose the most environmentally sensitive options for your print jobs.
®
®
• Xerox® operates a worldwide equipment take back and reuse/recycle program. Contact your Xerox® sales representative (1-800-ASK-XEROX) to
determine whether this Xerox® product is part of the program. For more information about Xerox® environmental programs, visit
www.xerox.com/environment.
Packaging take-back service for Xerox branded products:
Whenever possible, we encourage you to recycle packaging locally as it reduces greenhouse gas emissions associated with transportation. However, if
unable to recycle locally, we offer a packaging take-back and recycling service to our customers for Xerox branded products, where customers pay for
the return shipping and Xerox pays for the recycling. If interested in this service, please send your packaging to: Xerox Corporation, ESSO – Scrap,
6500 State Route 63, Middletown, OH 45044 , ATTN: EPEAT Packaging Returns
Customer Expectation and Installation Guide
17
Xerox Color ® C60/C70
Maintenance and Support
3 Maintenance and Support
This section helps define the support and services that Xerox will supply and what is expected of the customer.
Customer/Operator Maintenance
See Section 4
Support Services
Call Procedure
The Xerox Customer Support Centers are available to provide general information, answer questions and take service calls. You can reach the
Customer Support Center at the following toll-free phone numbers:
Technical Support Contact Information
Geography
Country
North America
South America
Western Europe
US
Canada
Mexico
Argentina
Bolivia, Plurinational State of
Brazil
Chile
Colombia
Paraguay
Uruguay
Venezuela
Austria
Belgium
Denmark
Faroe Islands
Finland
France
Germany
Greece
Greenland
Iceland
Ireland
Italy
Luxembourg
Monaco
Netherlands
Norway
Portugal
Spain
Sweden
Switzerland
United Kingdom
Phone Number
1-800-821-2797
1 800 939 3769
01.800.00.Xerox (93769) Opción 2
0800-222-XEROX (0800-222-93769)
0800-222-XEROX (0800-222-93769)
4004-4050 (capitais e regiões metropolitanas)
0800 979 3769 (demais localidades)
800-200-600
+01 8000 410071 / (571) 489 0071
0800-222-XEROX (0800-222-93769)
0800-222-XEROX (0800-222-93769)
+0800 7746837
0043 1 207 9000
32 2 713 14 52
352 48 01 23 (Luxembourg)
70107288
00 298 344001
(09) 6937 9666
0 825 012 013
069 999915632
801 11 93769
+299 36 35 34
+354 440 9000
1890 925 050
199 309 241
32 2 713 14 52
352 48 01 23 (Luxembourg)
0825 03 30 10
020 6563620
815 00 308
707 200 578
902 200 169 opción 2
0771-17 88 08
043 299 90 00
0870 900 5501
Training
If requested, customer training is available by contacting your local Sales Office and may be fee based.
Product Sustainability
Packaging take-back service for Xerox branded products:
Whenever possible, we encourage you to recycle packaging locally as it reduces greenhouse gas emissions associated with
transportation. However, if unable to recycle locally, please check with your local sales and service team for recycling instructions.
Customer Expectation and Installation Guide
18
Xerox Color ® C60/C70
Maintenance and Support
Supplies and Consumables
Item
Reorder #
Units per Carton
Black Toner Metered - WW
6R01521
1 Cartridge
Yield
30K
Cyan Toner Metered -WW
6R01524
1 Cartridge
34K
Magenta Toner Metered – WW
6R01523
1 Cartridge
32K
Yellow Toner Metered - WW
6R01522
1 Cartridge
34K
Black Toner Sold – NASG, ESG
6R01655
1 Cartridge
30K
Cyan Toner Sold – NASG, ESG
6R01656
1 Cartridge
34K
Magenta Toner Sold - NASG, ESG
6R01657
1 Cartridge
32K
Yellow Toner Sold - NASG, ESG
6R01658
1 Cartridge
34K
Black Toner Sold. - DMO
6R01659
1 Cartridge
30K
Cyan Toner Sold - DMO
6R01660
1 Cartridge
34K
Magenta Toner Sold - DMO
6R01661
1 Cartridge
32K
Yellow Toner Sold - DMO
6R01662
1 Cartridge
34K
Black Drum Cartridge
13R00663
1 Cartridge
190K
Color Drum Cartridge
13R00664
1 Cartridge
85K
Charge Corotron for Black Drum
13R00650
1 Cartridge
190K
Fuser (110V)
8R13102
1 Assembly
200K
Fuser (220V)
8R13065
1 Assembly
200K
Waste Toner Container
8R12990
1 Cartridge
50K
Convenience & BR Finisher Staple Cartridge
8R12964
1 Assembly
Convenience & BR Finisher Staple Refills
8R12941
3 Refills
5K Each
Booklet Maker Finisher Stapler Refills
8R12925
4 Refills per
Carton
5K Each
Standard/ Booklet Maker Finisher Staples
8R13041
1 Assembly
5K
BR Booklet Maker Finisher Staple Cartridge
8R13177
1 Assembly
5K
Comments
5K
Initial Supplies
The product will be delivered with an initial supply of Toner as well as the SMart Kits (the Drum Cartridges).
Recommended Supplies
The supplies that should be stocked at the customer site in order to perform daily and periodic maintenance and to keep the device
printing, will vary depending on monthly print volume, type of maintenance contract, and applications. Check with the local service and
sales team for details.
Customer Expectation and Installation Guide
19
Xerox Color ® C60/C70
Installation
4 Installation
Roles and Responsibilities
This section is key to clearly state Xerox and the customer roles and responsibilities and necessary actions.
Responsibility Matrix
Action
Ensure adequate space and power to configure the C60/C70
Unpack system / components
Install system hardware
Connect all System Components prior to powering up the system
Ensure network configuration
Confirm network integrity
Acquire and install client software including print drivers
Configure Workflow Scanning
Run initial software diagnostics when directed
Monitor and adjust as required
Load any additional fonts
Procure BNC transceiver for network connection (if needed)
Order and replace SMart Kits (Drum cartridges, Second Bias Transfer Roll,
transfer belt cleaner, and Waste Toner Cartridge, etc.) as needed.
Provide Help Line support
Provide spared parts
Provide service
SIQA (Simple Image Quality Adjustment Tool)
Customer
Xerox
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Primary customer C60/C70 applications:
_________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________
Special considerations or performance limitations identified by Xerox and agreed to by the customer:
_________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________
Customer Expectation and Installation Guide
20
Installation
Xerox Color ® C60/C70
Connectivity for Remote Services
For Client Review of Expectations for Remote Services:
1
2
3
4
5
6
To the extent necessary to fulfill Services, Customer grants Xerox, without charge, Remote Data Access. Remote Data Access shall be
enabled by Customer prior to the commencement of Services via a method prescribed by Xerox and Customer shall cooperate and assist
Xerox in providing Remote Data Access. Unless Xerox deems Devices incapable of Remote Data Access, Customer is responsible to
ensure that Remote Data Access is maintained at all times Services are being performed, and Xerox will not be responsible for failures to
meet service levels where Remote Data Access is not fully maintained by Customer.
Upon Xerox’s request, Customer shall also provide key contact information, such as IT contact name and phone number for support of
their Devices on the their network.
Most Xerox equipment is supported and serviced using data that is automatically collected and transferred to Xerox via electronic
transmission from equipment through the Customer’s network (“Remote Data”). This Remote Data is considered confidential information
under the service agreement terms.
Remote Data transmitted from Customer may include device information such as registration, meter read, supply level, configuration and
settings, software version, and problem/fault code data and may be used by Xerox for billing, report generation, supplies replenishment,
support services, on-going and future site optimization opportunities and product improvement purposes.
Remote Data Access may also enable Xerox to make available to the customer maintenance releases or upgrades for software or
firmware and to remotely diagnose and modify devices to repair and correct faults.
Remote Data will be transmitted to a secure off-site location in a secure manner specified by Xerox in accordance with Xerox published
policies on information security [at http://www.xerox.com/information-security/enus.html] for your region.
Install Support
7
For Install Support that includes Xerox System Analysts:
Customer shall contact and/or be contacted by their Xerox Systems Analyst.
For Install Support that does not include Xerox System Analysts:
Customer shall first utilize their Product System Administrator Guides available at Xerox.com, under the Support and Drivers link and by
selecting documentation for their desired product. If unsuccessful, the Customer should go to Xerox.com and select “Technical Product
Support” within the “Contacts” link to determine the appropriate contact for further support.
Connectivity Information
8
See Table Below
Setup Remote Services on Xerox device:
Customer Service
Engineer
The following needs to be completed where applicable:
Customer
In order to take advantage of Xerox offerings, Device Direct and/or Xerox Device Agent (like XDA lite)
software must be installed and devices connected and communicating to Xerox. These offerings may include
Automatic Meter Reads, Automatic Supplies Replenishment and Remote Diagnostics Support for your
device(s).
Professional
Services/Partner
Who?
Use the following to begin the establishment of Remote Services for your new Xerox device. This is not to
replace the product System Administrator Guide or Installation Guide but to identify certain install tasks that
can be completed before and after the delivery of your device.
PRE-DELIVERY: Device Networking Tasks:
1.
Non-Production Devices: After signing agreement with Xerox, an email will be sent to you with a web link to
download the appropriate software to install on a PC/server that is operational 24/7.
X
2.
Print Driver Software: Go to the “Support and Drivers” link on Xerox.com. If applicable, print drivers will be available
to download and install on your client devices.
X
3.
Installation by Professional Services: To ensure Device Remote Connectivity can be established, network data will
need to be collected by a Xerox Systems Analyst. A configuration form will be provided and require completion for
each device documenting connectivity and network information. Each individual device will require a configuration
form, unless all devices are to be configured in the same manner. In those cases, one configuration form along with a
list of applicable serial numbers on a separate sheet is acceptable.
IT Policy Compliance: You (customer) are responsible for obtaining approval for any internal IT policy compliance
required for the Xerox device/software to communicate via your intranet / internet to Xerox.
4.
X
X
POST-DELIVERY/INSTALL: Device Networking Tasks:
5.
Ethernet Cable: You (customer) need to provide an Ethernet cable for the device to the network drop. Cable
Connection can be completed by customer or installer depending on requirements.
X
6.
Sustaining Connectivity: Remote Connectivity must be maintained to take advantage of Xerox offerings. Offerings
include Remote diagnostics, supplies replenishment, and meter reads from appropriate products.
X
Customer Expectation and Installation Guide
X
X
21
Xerox Color ® C60/C70
Installation
7. Device Direct (DD) Communications:
Each device will need to be communicating to Xerox through the internet via the Xerox Device Direct method for Remote
Diagnostics support. Follow the steps below (customer) to find how to setup Device Direct, if required.
X
X
X
Setting up Device Direct:
A) Go to the “Support and Drivers” link on Xerox.com.
−
−
Search for your product, then click on the Support link for that product.
In the search field, enter "Enroll SMart eSolutions" and follow the instructions provided.
B) If the search does not return any instructions:
−
−
Click on the Documentation link for your product.
Open the System Administrators Guide and refer to the section of the guide which provides information regarding
Smart eSolutions Setup and follow the steps provided.
Installation Planning
Main Components
The Xerox Color C60/C70 is delivered with Print Engine, Scanner and Embedded Network Controller
Module Dimensions
Configuration
Width
Depth
Height
Weight
IOT (Base) (IOT +UI + UI Mtg.)
HCF + IOT+ IFM + CZ Folder + Standard
(D4) Fin
40.4”
1026.2mm
62 ”
1574 mm
62 ”
1574 mm
79.1”
2010 mm
79.1”
2010 mm
88.3”
2243 mm
88.3”
2243 mm
98.8”
2509 mm
107.9”
2742 mm
81.4”
2068 mm
81.4”
2068 mm
90.6”
2301 mm
90.6”
2301 mm
101”
2567 mm
110.2”
2800 mm
97.7”
2481.6 mm
97.7”
2481.6 mm
103.5”
2628.9 mm
103.5”
2628.9 mm
105.7”
2782.5 mm
31.6 ”
803.5mm
31.6 ”
803.5mm
31.6”
803.5mm
31.6 ”
803.5mm
31.6 ”
803.5mm
31.6 ”
803.5mm
31.6 ”
803.5mm
31.6 ”
803.5mm
31.6 ”
803.5mm
31.6 ”
803.5mm
31.6 ”
803.5mm
31.6 ”
803.5mm
31.6 ”
803.5mm
31.6”
803.5mm
31.6 ”
803.5mm
31.6”
803.5mm
31.6”
803.5mm
31.6”
803.5mm
31.6”
803.5mm
31.6 ”
803.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
578 lbs
(557+ 7 +14)
591 lbs
(578 + 13)
655 lbs
(64+578+ 13)
674 lbs
(578 + 96)
738 lbs
(64 + 578 + 96)
777 lbs
(578 + 103 + 96)
841 lbs
(64 + 578 + 103 + 96)
1026 lbs
(352 + 578 + 96)
1129 lbs
(352 + 578 + 103 + 96)
711 lbs
(578 + 133)
775 lbs
(64 + 578 + 133)
878 lbs
(578 + 103 + 133)
942 lbs
(64 + 578 + 103 + 133)
1063 lbs
(352 + 578 + 133)
1166 lbs
(352 + 578 + 103 + 133)
919 lbs
(578+110+231)
983 lbs
(64+578+110+231)
974 lbs
(578+110+286)
1038 lbs
(64+578+110+286)
1071 lbs
(64+578+110+88+231)
OHCF + IOT + IFM + Booklet Maker
Fin (D5)
122.9”
3121.7 mm
31.6”
803.5 mm
54.8”
1391.5mm
1326 lbs
(352+578+110+286)
IOT + OCT
HCF + IOT + OCT
IOT+ BR Finisher
HCF + IOT +BR Finisher
IOT + CZ Folder + BR Finisher
HCF + IOT + CZ Folder + BR Finisher
OHCF + IOT +BR Finisher
OHCF + IOT + CZ Folder + BR Finisher
IOT + BR Booklet Maker Finisher
HCF + IOT + BR Booklet Maker Finisher
IOT + CZ Folder + BR Booklet Maker finisher
HCF + IOT + CZ Folder + BR Booklet Maker
finisher
OHCF + IOT + BR Booklet Maker Finisher
OHCF + IOT + CZ Folder + BR Booklet
Maker finisher
IOT + IFM + Standard (D4) Fin
HCF + IOT + IFM + Standard (D4) Fin
IOT + IFM + Booklet Maker Fin (D5)
HCF + IOT + IFM + Booklet Maker Fin
(D5)
Customer Expectation and Installation Guide
22
Xerox Color ® C60/C70
Installation
2T OHCF + IOT + IFM + Booklet Maker
Fin (D5)
OHCF + IOT + IFM + CZ Folder +
Booklet Maker Fin (D5)
2T OHCF + IOT + IFM + CZ Folder +
Booklet Maker Fin (D5)
HCF + IOT + IFM + GBC + Std Fin (D4)
OHCF + IOT + IFM + GBC + Std Fin
(D4)
2T OHCF + IOT + IFM + GBC + Std Fin
(D4)
122.9”
3121.7mm
130.9”
3447.8 mm
130.9”
3447.8 mm
109.7”
2786.4mm
129.1”
3279.1mm
129.1”
3279.1mm
31.6”
803.5 mm
31.6 ”
803.5 mm
31.6 ”
803.5 mm
31.6”
803.5mm
31.6”
803.5mm
31.6”
803.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
1392 lbs
(418+578+110+286)
1414 lbs
(352+578+110+ 88+ 286)
1486 lbs
(418+578+110+ 88+ 286)
1173 lbs
(64+578+110+190+ 231)
1461 lbs
(352+578+110+190+ 231)
1527 lbs
(418+578+110+190+ 231)
HCF + IOT + IFM +GBC + CZ Folder + Std
Fin (D4)
OHCF + IOT + IFM +GBC + CZ Folder +
Std Fin (D4)
2T OHCF + IOT + IFM +GBC + CZ Folder +
Std Fin (D4)
OHCF + IOT + IFM + GBC + Booklet Maker
Fin (D5)
2T OHCF + IOT + IFM + GBC + Booklet
Maker Fin (D5)
OHCF + IOT + IFM +GBC + CZ Folder +
Booklet Maker Fin (D5)
2T OHCF + IOT + IFM +GBC + CZ Folder +
Booklet Maker Fin (D5)
HCF + IOT + IFM + Booklet Maker Fin (D5)
+ SQFT
OHCF + IOT + IFM + Booklet Maker Fin
(D5) + SQFT
2T OHCF + IOT + IFM + Booklet Maker Fin
(D5) + SQFT
HCF + IOT + IFM + CZ Folder + Booklet
Maker Fin (D5) +SQFT
OHCF + IOT + IFM + CZ Folder + Booklet
Maker Fin (D5) +SQFT
2T OHCF + IOT + IFM + CZ Folder +
Booklet Maker Fin (D5) + SQFT
OHCF + IOT + IFM + GBC + Booklet Maker
Fin (D5) + SQFT
2T OHCF + IOT + IFM + GBC + Booklet
Maker Fin (D5) + SQFT
OHCF + IOT + IFM + GBC + CZ Folder +
Booklet Maker Fin (D5) + SQFT
2T OHCF + IOT + IFM + GBC + CZ Folder
+ Booklet Maker Fin (D5) + SQFT
117.7”
2989.6mm
137.1”
4027.2mm
137.1”
4027.2mm
134.9”
3426.5mm
134.9”
3426.5mm
142.9”
3629.7mm
142.9”
3629.7mm
144.4”
3667.8mm
151.8”
3855.7mm
151.8”
3855.7mm
152.4”
3870.0mm
159.8”
4058.9mm
159.8”
4058.9mm
163.8”
4160.5mm
163.8”
4160.5mm
171.8”
4343.4mm
171.8”
4343.4mm
31.6 ”
803.5mm
31.6 ”
803.5mm
31.6 ”
803.5mm
31.6”
803.5mm
31.6”
803.5mm
31.6 ”
803.5mm
31.6 ”
803.5mm
31.6”
803.5mm
31.6”
803.5mm
31.6”
803.5mm
31.6 ”
803.5mm
31.6 ”
803.5mm
31.6 ”
803.5mm
31.6”
803.5mm
31.6”
803.5mm
31.6 ”
803.5mm
31.6 ”
803.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
54.8”
1391.5mm
1261 lbs
(64+578+110+190+88+231)
1549 lbs
(352+578+110+190+88+231)
1615 lbs
(418+578+110+190+88+231)
1516 lbs
(352+578+110+190+286)
1582 lbs
(418+578+110+190+286)
1604 lbs
(352+578+110+190+88+286)
1700 lbs
(418+578+110+88+286+220)
1273 lbs
(64+578+110+286+ 235)
1561 lbs
(352+578+110+286+ 235)
1627 lbs
(418+578+110+286+ 235)
1361 lbs
(64+578+110+88+286+235)
1649 lbs
(352+578+110+88+286+235)
1715 lbs
(418+578+110+88+286+235)
1751 lbs
(352+578+110+190+286+ 235)
1817 lbs
(418+578+110+190+286+ 235)
1839 lbs
(352+578+110+190+88+286+235)
1905 lbs
(418+578+110+190+88+286+235)
IOT = Print Engine w/UI and UI Mtg.
OCT = Offset Catch Tray
HCF = High Capacity Feeder
OHCF = Oversize High capacity feeder (1T/2T)
IFM = Interface module
BR Fin = Business Ready Finisher
BR Booklet Maker finisher
Standard finisher = D4 Finisher
Booklet Maker finisher = D5 Finisher
CZ Folder = CZ Folder Option
GBC = GBC Hole Punch Unit
SQFT = Square Fold Trimmer
Electrical Requirements
Ground Fault Protection is provided which meets Xerox internal safety requirements and exceeds the Industry Standards for Information Technology
Equipment. A single power cord (see above) is required for the C60/C70 series
* Note: Please Refer to Detailed Specifications Section on page 3 for appropriate electrical requirements.
Customer Expectation and Installation Guide
23
Xerox Color ® C60/C70
Installation
Space Requirements/ Service Space Envelope
Service Envelope for the Xerox® Color C60/C70 Printer
The dimensions listed below provide the overall service space required, including the space to the nearest obstruction. The dimensions reflect both
typical and hallway installations and are absolute minimums.
A minimum of 24 inches (609.6 mm) should be maintained between the back of the machine (Note: not the Xerox Integrated Fiery Color Server, or the
Free-Flow Integrated Server if installed) and wall. Installation of the 1- or 2- Tray Oversize High Capacity Feeder and / or Standard Finisher or Business
Ready Booklet Maker Finisher results in a stationary system installation.
A
D1
D2
IOT
OHCF
FIN
C
B
Service/Operational Envelope:
Width = D1 + Configuration Dimension + D2
Depth = A + Configuration Depth + B
Service / Operational Space
A
Rear of Processor / System
B
Front of main Processor
C
Front of HCF and Finisher /
Folder
Left Side of System
(w/o Printers servers)
Right side of System
D1
D2
E
Allowable Height
Customer Expectation and Installation Guide
Moveable Installation
Stationary Installation
10 ”
254 mm
38”
965.2 mm
42”
1066.8 mm
13 ”
330 mm
24 ”
610 mm
78 ”
1981 mm
24 ”
610 mm
24 ”
610 mm
28”
711.2 mm
13 ”
330 mm
24 ”
610 mm
78 ”
1981 mm
Comment
24
Xerox Color ® C60/C70
Installation
Power Consumption
Power Consumption 110v-127v
C60
C70
1091 watts
1230 watts
1230 watts
1113 watts
1330 watts
1330 watts
Standby Mode
210 watts
197 watts
Low Power Mode
Sleep Mode
53 watts
71 watts
1.0 watt
(Default time to Sleep mode = 2
min.)
Warm up from Power off
230seconds
Recovery from Low Power
Recovery from Sleep
< 20 sec.
< 28 sec.
Power Consumption 220v-240v
C60
C70
1110 watts
1230 watts
1230 watts
1140 watts
1330 watts
1330 watts
Standby Mode
218 watts
201 watts
Low Power Mode
Sleep Mode
100 watts
108 watts
1.7 watt
(Default time to Sleep mode = 2
min.)
Warm up from Power off
230seconds
Recovery from Low Power
Recovery from Sleep
< 20 sec.
< 28 sec.
Running (Average)
Base unit
Base unit with Business Ready
Finisher
Base unit with Business Ready
Booklet Maker Finisher
Running (Average)
Base unit
Base unit with Business Ready
Finisher
Base unit with Business Ready
Booklet Maker Finisher
Installation Considerations
•
•
•
•
There should be a minimum of 78 inches (1,981 mm) clearance from the floor to the nearest overhead obstruction.
The Base Configuration unit weighs about 578lbs
Electrical requirements and space requirements must be satisfied before the equipment is delivered.
One network drop is required for installation
Network Requirements
• The customer is responsible for connecting and configuring the equipment on their network.
• One network drop is required for typical installation.
Fax Telephone Line Requirements (Optional)
If the fax option is installed, the following telephone line requirements are applicable:
Telephone wall jack should be within 7’ of the middle left side of the back of the unit.
1. Telephone Service Supported:
Customer Expectation and Installation Guide
25
Installation
−
−
−
2.
3.
Xerox Color ® C60/C70
Sole-use, non-switchboard (direct dial)
RJ11 – 6 position, 4 pin modular jack
Single analog line.
For three line fax, a third telephone line meeting the requirements identified in items 1 and 2 above is required.
Fax over VOIP is supported
Convenience Stapler (Optional)
Requires separate outlet from one required for device. Refer to the above product electrical requirements for outlet type and requirements. The same
electrical line as the device may be used; if no other devices are present on the line.
Energy Star
Energy Star is a government-backed program helping businesses and individuals protect the environment through superior energy efficiency. The
C60/C70 is 2014 Energy Star certified.
The C60/C70 automatically switches to a Low Power mode after an idle period. After an additional idle period, the machine switches to sleep mode,
saving additional power. The customer can adjust the “Time to Low Power mode” and the “Time to Sleep Mode” as described in the documentation.
Customer Expectation and Installation Guide
26
Xerox Color ® C60/C70
Operational Considerations
5 Operational Considerations
Image Quality Expectations
Image Quality
USB Print
The C60/C70 series is designed to produce consistent uniform prints
and copies in the product’s specified Average Monthly Print Volume
range.
The C60/C70 series is designed to produce a uniform image. Image
Quality is subjective and can be impacted by lighting, and is strongly
influenced by paper (consult the Recommended Materials List).
• The Xerox Color C60/C70 Printer uses a low melt EA toner which is
the same type as used by the X700. When compared to the toner
currently being used on the DC2XX family - customers will notice
lower gloss (consistent to the matte finish of offset prints) and less
color saturation (but improved detail in shadows, etc). Should the
customer wish to achieve a glossier finish – they can use the
enhanced gloss mode to achieve that look– though it may not be as
glossy as what they are accustomed to seeing on the DC2XX family.
If you plan to run C60/C70 prints through other equipment, it is
highly recommended you test the application before committing to
the job. Many factors (operating temperature of the fuser, fuser oils,
fix reaction of toner/inks) impact the success of running C60/C70
prints in other equipment
USB Media Print enables walk-up users to print “Print-Ready” files
(PDF, XPS, TIFF, JPEG, TXT) files directly from most standard
(FAT-32 formatted) USB Thumb Drives.
Files are sent directly from the USB drive to the print controller.
Print Expectations
Duplex (2-sided) Copying / Printing
Maximum Auto Duplex Support
Paper Size
12x18/SRA3
11x17/A3
8.5x11 Letter/A4
•
•
•
•
Coated
220gsm
220gsm
220gsm
Uncoated
220gsm
220gsm
220gsm
When feeding HW2 and/or coated stock it is highly
recommended to feed from tray 5 (Bypass) or trays 6/7 (OHCF)
due to the degraded feeding performance of these papers
through trays 1-4.
8.5x11/A4 may perform better when fed long edge feed (LEF)
Coated 1 side (C1S) media should not be auto-duplexed
As with any copier or printer, duplex performance, (coated or
uncoated), is not expected to match the performance for singlesided copying. Paper jam rates may be higher than the rate you
will experience for the same throughput material in single-sided
mode.
Power On time
Power on time from cold-boot to the display of the main All services
screen may take three minutes. Users will notice an additional 5-8
sec delay when they first access a service. Subsequent entries into
that service (including after exiting power saver) will not incur any
additional delay. This is designed to improve the availability of the
first screen as the subsequent services are loaded when first
accessed.
Scanning Expectations
The C60/C70 supports scan to network folder, Scan to USB, Scan to
Mailbox, Scan to Home and Scan to email functionality as standard.
Scan Resolution
The maximum image scan resolution is 600 dpi. The default scan
resolution is set to 200dpi.
Note: Several resolution settings are selectable via the 8.5 inch User
Interface touch panel. Lower resolutions will result in files that are
smaller in size thereby reducing network traffic.
When scanning the OCR processing, image compression, file
formatting and file transfer operations all continue after the job
has completed scanning by the scanner.
Heavy print usage may delay the processing of scan jobs.
Non-standard Paper Sizes
Plain paper with a feed length below 5.5in may jam more frequently.
Select media between 257-300gsm are supported, please see
Recommended Materials List for further details.
•
•
SIQA- (Simple Image Quality Adjustment toolset)
1.
2.
To achieve improved registration results with paper other
than centerline paper, Xerox recommends that you use the
Simplified Image Quality Adjustment (SIQA) tool to create
custom media profiles to a specific tray and paper type by
making the front to back registration better aligned.
This additional registration tool allows service or users to
easily create profiles The tool can also make Density
adjustments inboard/outboard (SMILE Correction).
•
•
•
*Note: For more information regarding the SIQA tool, please contact
your local sales representative or reference the link below: Copy and
Paste into your browser:
Recommended paper to maximize image quality and
product reliability is Xerox Color Xpressions Select 24lb or
Xerox Colotech+ 90gsm (smooth bright white paper). This
paper is specifically designed to maximize image quality
and machine performance over a wide range of
environmental conditions.
Using coated (e.g., gloss, matte coated or photo finished /
proofing) and/ or Cardstock (i.e., >90lb Index / 164 gsm)
stock may result in degraded reliability performance.
Customers using these materials exclusively or
extensively will see decreased performance as it relates to
image quality and product reliability.
Attempts to feed heavier than recommended paper stocks,
and/or misuse of the media settings, may cause machine
damage or poor image quality. Using media at run modes
other than that recommended for the grade may cause
poor image quality and machine damage.
Envelope printing should not be used as a primary
application
Envelopes without windows are supported through the
bypass tray in sizes Monarch, DL, C5, and No 10 (other
custom sizes are supported as well). Envelope feeding
reliability is highly dependent on the envelope used and
the area coverage of the image being affixed to the
envelope.
http://digitalprinting.blogs.xerox.com/2014/03/03/heres-a-foolproofmethod-for-profitable-production-of-business-cards/#.VCGIwssg-1s
Customer Expectation and Installation Guide
27
Xerox Color ® C60/C70
Operational Considerations
Service Uptime
Solutions
• The number of copies or prints between service calls on a digital
copier / printer is highly dependent on customer expectations of
quality and the use of applications and throughput materials.
• Full list of supported solutions can be found at
www.office.xerox.com/software-solutions
Customer Expectation and Installation Guide
28
Xerox Color ® C60/C70
Operational Considerations
Operational Definitions
1-Sided
2-Sided
AMPV
Daily Maintenance
Delta E
DPI
Duplex
Duty Cycle
GSM
Image Registration
Lbs.
Maximum Paper Size
Maximum Print Area
Media/Substrate
Multi-Function
Printer/Copier
Operator Maintenance
Paper Registration
Periodic Maintenance
Press
Preventative Maintenance
Print Quality
Print Speed
Printer
Simplex
Uptime
Virus Security
Printing on only one side of the substrate
Printing on both sides of the substrate
Average Monthly Print Volume - reflects a range of an entire machine population’s monthly usage, while Duty Cycle
displays the potential to grow while still utilizing the machine.
Maintenance that the customer operator must complete daily to maintain quality printing
The measurement of color variation, there are multiple
Dots Per Inch or physical resolution of the printing device
Printing on both sides of the substrate
A print device’s rated capacity to continuously perform work under normal conditions. It is usually expressed as the
sustainable volume in letter- or A4-sized pages that can be printed per month.
Grams per Square meter – Paper density (also known as basis weight and grammage)
The alignment of the individual CMYK image to each other on the printed piece
Pounds - US paper sizes is pounds of a ream of 500 (or in some cases 1000) sheets of a given (raw, still uncut) basis
size – heavier stocks have a higher lb
Largest substrate that can be physically run through the device
Largest area that can be printed on a substrate
The material that can be imaged through a device (e.g. uncoated, coated, cover stock, transparency, etc.)
A device that can be A4 or A3 with capabilities of scan, fax, email, and can be integrated with multiple solutions
Maintenance tasks the customer is responsible to complete
The placement/alignment of the image on the sheet and sheet to sheet
Maintenance that occurs based on print volume
Relates to production devices (graphic communications) concerned with high production and high image/color quality
requirements
Any actions that are taken to prevent downtime and maintains quality printing
The characteristic of printed material evaluated in terms of color, register, clarity, and the degree to which it resembles
the original image.
The rated speed that a device can print
A smaller device (usually A4) that relates to the office side of the business
Printing on only one side of the substrate
The time that the device is available for printing
Protection for multifunction printers similar to how you protect PCs from viruses and malware, and control access to end
points on your network – making your multifunction printer a fully secured network citizen.
Customer Expectation and Installation Guide
29
Appendix
Xerox Color ® C60/C70
Appendix
Links: (Paste into your browser)
Detailed Specifications
http://www.xerox.com/digital-printing/latest/X60SS-01U.pdf
Brochure
http://www.xerox.com/digital-printing/latest/X60BR-01U.pdf
Certifications
http://www.xerox.com/digital-printing/latest/XOGFS-14U.pdf
Solutions
http://www.xerox.com/digital-printing/latest/SO1FS-03U.pdf
Xerox Integrated Color Sever
http://www.xerox.com/digital-printing/latest/X60FS-03U.pdf
Xerox Exi C60/C70 Print Server Powered by Fiery
http://www.xerox.com/digital-printing/latest/X60FS-02U.pdf
Xerox Ex C60/C70 Print Server Powered by Fiery
http://www.xerox.com/digital-printing/latest/X60FS-01U.pdf
Xerox Free Flow Print Server for C60/C70
http://www.xerox.com/digital-printing/latest/X60SS-02U.pdf
Customer Expectation and Installation Guide
30
Appendix
Xerox Color ® C60/C70
Customer Agreement
I have reviewed this CEIG document and understand the specifications listed:
__________________________________________________
Customer
__________________________________________________
Xerox Sales Representative
__________________________________________________
Xerox Customer Service Representative
Customer Expectation and Installation Guide
31
Download PDF
Similar pages