07 GENERAL TOOLS
2 Hand Tools
2 Application Guns
4 Files & Deburring
6 Drift & Number Punches
7 Vice Grips & Pliers
10 Cable/Bolt Cutters & Shears
11 Angled Gear & Accessories
12 Ratcheting Wrenches & Wrench Sets
16 Screwdrivers & Screwdriver Sets
21 Drive Bits, Allen Keys & Sets
26 Rivet & Rivnut Installation Tools
28 Speedpress
31 Die Sets
34 Suction Handles
35 Ratchets, Sockets, & Sets
46 Body Work Tools
48 Pneumatic Tools
48 Pneumatic Grinders & Sanders
52 Reversible Air Drill
53 Impact Wrenches & Sockets
55 Wheel Nut Looseners
56 Grease Guns & Joint Cleaning
58 Air Regulator with Gauge
58 Pistol Vac
59 Air Comb- Blow Gun for Radiators & Filters
61 Pneumatic Tool Oil
61 Pneumatic Rivet Gun
61 Electric Tools
62 Measuring & Lifting Tools
64 Spray Bottles & Taps
JULY
GENERAL TOOLS 1
MULTI-PURPOSE DUAL CARTRIDGE CAULKING GUN
Art. No. 891.0092
Pre-assembled gun, ready for 1:1 ratio use with 220 mL
cartridges. Gun can also be changed-over for use on
2:1 applications.
+
+
Application:
1. Place applicator with knob on the floor.
2. Put both thumbs on front plate and fingers behind the disk you desire to
remove.
3. Move fingers forward toward thumbs until disk snaps off rod. If the disk is hard
to remove, use a rubber mallet and gently tap until disk becomes loose.
28 mm
Off centre
36 mm
Off centre
1:1
Attaching push disk(s):
1. Put socket of push disk over rod shaft.
2. Push firmly onto the rod shaft until disk snaps in place. There should be two
snapping sounds which will ensure the disks are firmly attached. Some twisting
of the push disk may be required to achieve the second snap.
3. Both disks should be parallel with each other. This will ensure proper mixing
of materials.
2:1
Note: To be used with Power Bond (Art. No. 893.450100 replacement nozzles Art. No. 891.609) as a 2:1 ratio, and with Replast
Easy (Art. No. 893.50002 to 893.50009 - replacement nozzles Art.
No. 891.604) as a 1:1 ratio.
Mixing Ratio Cartridges:
DUAL CARTRIDGE CAULKING GUN
Art. No. 891.0091
For application of Replast Easy cartridges with 220 mL contents
•
•
•
•
•
•
Durable high-strength steel construction
Ergonomic center balanced design
Adjustable plungers to dispense 2:1 ratio cartridges
Smooth, easy dispensing action
Cartridge holder removable for easy cleaning
Will not dispense product when not being squeezed
HEAVY DUTY CAULKING GUN
Art. No. 891.0095
•
•
•
•
•
•
•
26:1 thrust ratio.
Extra durable heat-treated piston rod.
Hammer finished zinc alloy handle with comfort grip.
Precision sintered friction plate.
Easy release star-burst reverse punched gripping plate.
Ladder hook.
Weight: 1.14 kg (2.5 lbs).
P. Qty: 1
2 NEW! WURTH.CA
2017
HEAVY DUTY CAULKING GUN
Art. No. 891.00
• For application of 310 mL cartridges.
• Will not dispense product when not being squeezed.
P. Qty: 1
HEAVY DUTY DOUBLE CARTRIDGE CAULKING GUN
Art. No. 891.0096
• For use with 400 mL Replast Easy cartridges
• Heavy duty double cartridge gun for professional use
• converts easily for mixing ratio's of 1:1, 2:1, 4:1 and 10:1 using
snap-in, snap-out push disks
• Extra durable, heat treated piston rod.
• Precision centered friction plate.
• Hammered finish alloy handle with comfort grip.
• 26:1 Thrust ratio
P. Qty: 1
CARTRIDGE ADAPTER
Art. No. 891.9001
Adapts ordinary caulking gun for use with 50 mL Würth Fix cartridge (Art. No.
890.90011, 890.90031)
P. Qty: 1
GUN FOR 5O ML WÜRTH FIX RIGID AND FLEXIBLE
Art. No. 891.0093
Special gun to be used with Würth Fix Rigid (Art. No. 890.90011) or Würth
Fix Flexible (Art. No. 890.90031)
JULY
GENERAL TOOLS 3
PNEUMATIC CAULKING GUN
Art. No. 703.891020
Features:
• Designed specially for sealant cartridges (310 ml cartridges of silicones, Glue
+ Seal, etc.)
• Provides easy handling, comfort, and minimal efforts for the user
• Aluminum body and carbon steel pipe
Benefits:
• The ergonomic design offers excellent grip
• Lightweight, easy to handle with great balance
• Highly resistant and durable
• Exhausts air back through the cable
• The sensitive trigger provides excellent control of the application
Technical data
Pressure (bar / psi)
Air consumption (pcm / l / min / scfm)*
Connection (inch)
Hose diameter (inch / mm)
Weight (kg)
Dimensions (C × L × H) (mm) × 150
Pipe capacity (for sealant cartridges) (ml)
Noise level (dB(A))
Vibration (m/s²)
Note: Air consumption values obtained with high pressure plugs and a 3/8" spiral
hose (8 metres long)
6.2 / 90
14 / 396 / 101
1/4” NPT
3/8” / 10
1,500
325 × 50 × 150
310
82
<2,5
AUTOMOTIVE FILES, 6 PIECES
Art. No. 714.6174
•
•
•
•
•
•
•
“Warding” files.
Includes flat, flat pointed, round, triangular, square and half-
DIN 7283.
100 mm/ 3-15/16" long.
Double cut.
With wooden handle.
In a plastic case.
AUTOMOTIVE FILES, 5 PIECES
Art. No. 714.6190
•
•
•
•
4 NEW! WURTH.CA
2017
Workshop files.
Includes round, square, flat-hand, half-round, and triangular file.
200 mm/ 7-7/8" long.
Double cut.
round file.
DEBURRING TOOL ASSORTMENT
7
5
9
2
8
6
10
3
Art. No. 965.42100
4
The efficient deburring system for steel, aluminum, brass, cast iron and plastics.
18
11
Contents: 32 pieces
12
• For universal use due to interchangeable blades.
• Thanks to turnable blades, holes and edges can be deburred from inside,
outside or on both sides.
13
14
1
19
15
16
17
20
21
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Content in
Assortment
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
Item
Universal plastic handle
Plastic handle with HSS cutting disc
Plastic handle with two HSS cutting discs
Holder for 12 mm, 20 mm and 30 mm countersinker
Holder for 2.6 mm ø and 3.2 mm ø blades
Triangular blade
Round blade with 90° angle
Round blade
HSS blade, removes outside and inside burrs simultaneously, 3.2mm ø
HSS blade for brass and cast iron, 3.2 mm ø
HSS blade for steel and aluminum 3.2 mm ø
HSS blade especially for straight edges, 3.2 mm ø
HSS blade with extra-fine tip for steel and aluminum, 3.2 mm ø
HSS blade with extra-fine tip for brass and cast parts, 3.2 mm ø
HSS blade, removes outside and inside burrs simultaneously, 2.6 mm ø
HSS blade for brass and cast iron 2.6 mm ø
HSS blade for steel and aluminum 2.6 mm ø
12 mm HSS countersinker, M7 female thread
20 mm HSS countersinker, M7 female thread
30 mm HSS countersinker, M7 female thread
Allen key, 3 mm x 66 mm x 23 mm
Art. No.*
714.4201
714.4206
714.4205
714.4203
714.4202
714.4204
714.42061
714.42051
714.42026
714.42025
714.42024
714.42027
714.42028
714.42029
714.42023
714.42022
714.42021
714.42031
714.42032
714.42033
715.3138
Individual
P. Qty.
1
1
1
1
1
1
2
2
5
5
5
5
5
5
5
5
5
1
1
1
1
* Individual replacement items are available through Special Orders.
Please anticipate 2-3 weeks for delivery.
JULY
GENERAL TOOLS 5
SET OF DRIFT PUNCHES
Art. No. 714.63240 - 1 set
Length mm
120
a mm
10
10
12
12
12
12
d mm
2
3
4
5
6
8
Weight g
65
65
95
95
95
95
Type
B
B
D
D
D
D
Art. No.
713.6318
713.6319
713.6320
714.6321
714.6322
714.6323
• Chrome-vanadium air-hardened steel.
• Tempered safety striking heads will not burr or split.
• Shaft all-hardened, making it extremely tough and
durable.
• Tempered chisel head.
B = light type
D = heavy type
• 6 pieces.
• Sturdy metal carrying case.
•
* Available through Special Orders
SET OF PIN PUNCHES
Art. No. 714.6341 - 1 set
• Chrome-vanadium air-hardened steel.
• Tempered safety striking heads will not burr or split.
• Shaft all-hardened, making it extremely tough and
durable.
• According to DIN 6450, form C.
• Sturdy metal carrying case.
• Chisel head tempered.
* Available through Special Orders
L1 mm
150
L2mm
30
40
50
50
50
50
a mm
10
10
10
10
10
12
d mm
2
3
4
5
6
8
Weight g
60
60
65
65
70
80
Art. No.
714.6325
714.6327
714.6328
714.6329
714.6330
714.6331
NUMBER PUNCH SET
Art. No. 695.941615 - 1 set
DIN 1451
• Superior quality, heat treated steel.
• Sharp characters ensure deep, clear impressions.
• They can mark steel up to a hardness of 50 Rockwell.
• 5 mm high figures.
6 NEW! WURTH.CA
2017
VICE-GRIP PLIERS
Vice-grip pliers with universal jaws.
Features:
• Smooth-action release lever with spring mechanism.
One-hand operation - pulling instead of pressing.
• Lock nut for locking clamping width.
Constant adjustment for repetitive work steps.
• Ergonomic, attractive design.
Convenient, effortless use.
• High-quality epoxy coating.
Welding spatters hardly adhere.
Less rusting than with nickel.
10 times better rust resistance than a nickel coating. More friendly to the
environment.
The combination of straight, semi-circular and convex jaw shape results in a broad
range of clamping applications.
Total length
200 mm
235 mm
300 mm
Clamping jaw width
0 mm - 40 mm
0 mm - 60 mm
0 mm - 60 mm
Art. No.
713.0925
713.0926
713.0927
Qty.
1
HOG RING PLIER
Art. No. 502.7657
• Offset angle nose for close to floor non-removable cushions.
P. Qty: 1
CLAMPING WRENCH
Pliers and wrench in one tool.
• Handle: plastic-coated.
• Jaws: guided in parallel, smooth, nickel-plated
No damage on workpiece due to gap-free surface pressure.
• Adjustment at the press of a button
Adjustable directly on workpiece.
• Force transmission: 10x
High clamping force.
• The stroke between the gripping surfaces enables rapid tightening and
loosening of screw connections according to the ratchet principle.
L
B
Applications:
Suitable for gripping, holding, pressing and bending of workpieces; also for
gentle mounting of surface-finished fittings
Max
46mm
35mm
1 3/4in
1 3/8in
L
B
Art No.
270mm
180mm
18.5mm
14mm
715.0250
715.0251
A traditional
spanner
wrench
creates
deformation of the
bolts/nuts
JULY
The Würth
clamping wrench
holds bolts/nuts
perfectly on the flats
without deformation
GENERAL TOOLS 7
SET OF 5 PLIERS
Art. No. 715.01560
Description
• All the pliers you need in your daily work in one set. Perfect for all applications
and industries.
• Handles with textured surface for comfort and an anti-slip grip.
Set Includes:
• Needle nose pliers
• Side cutter pliers
• Combination pliers
• Insulation stripping pliers
• Cutting pliers
Description
Art. No
Length
Needle Nose Pliers
715.01568
200 mm
Side Cutter Pliers
715.01572
180 mm
Combination Pliers
715.01575
180 mm
Insulation Stripping Pliers
715.01577
160 mm
Cutting Pliers
715.01578
160 mm
Note: Individual pliers are available through Special Order Only
ANGLED COMBI PLIERS
Art. No. 714.01591
A multi-functional plier that allows many applications in countless
fields!
Features:
• Ergonomic and relaxed position of the hand.
• 2K handle for a better comfort.
• Convenient use when pulling objects.
• Grooves to get a grip of objects, e.g. nails
• Securing workpieces
• Gripping pipes
• Form-fit clamping of screw-driving parts
• Cutting cables and wires
• Length: 200 mm
Soft Wire: 5.9 mm
Hard Wire: 2.5 mm
Aluminum and Copper cables: 13 mm
ANGLED FLAT ROUND PLIERS
Art. No. 714.01592
A nose tip plier for those hard to reach areas!
Features:
• Ergonomic and relaxed position of the hand.
• 2K handle for a better comfort.
• Convenient use when pulling objects.
• Cutting cables and wires
• Insulating conductors
• Gripping, securing and bending
• Crimping wire-end sleeves (low voltage)
• Length: 210 mm
Soft Wire: 5.9 mm
Hard Wire: 2.5 mm
Aluminum and Copper cables: 13 mm
8 NEW! WURTH.CA
2017
WATERPUMP PLIERS
•
•
•
•
•
•
•
L
inch
L
mm
10
12
250
300
D
D
inch
mm
1
1-1/2
30
40
E
mm
B
mm
C
mm
Art. No.
Qty.
32
40
16
19
7
10
714.0276
714.0277
1
Crafted from Chrome-Vanadium steel, hardened.
Plastic coated anti-slip handle.
Induction hardened teeth.
Black lacquered, ground head.
Grooved, 7 adjustments on joint.
Self-clamping on pipes and nuts.
No slippage on workpiece.
TOWER PINCERS
DIN 5242
Length
mm
200
250
280
• Head polished, matte black finished handles.
• Twist and cut wire in one operation.
• The short head and the long, slim shanks make it possible to turn the pliers
easily and quickly when twisting.
• Pull out nails, clips, etc.
• Can be used to mount Prefix 541 clamps.
inches
5
10
11
Weight in g
Art. No.
P. Qty
230
390
450
715.0204
715.0206
715.0207
1
TIGHT ACCESS TWEEZERS 14”
Art. No. 714.600
Go where no tool has gone before with the Tight Access Tweezers.
Surpassing the reach of the industry’s longest available needle nose pliers, these tweezers have a slim, low-profile
design that allows it to fit into tight areas that other pliers cannot. Unlike traditional pliers it provides a secure grip
due to its ability to flex as pressure is applied, ensuring a strong grasp on the object being retrieved. Featuring
interlocking teeth with a stainless steel body, this tool is ideal for grabbing a variety of objects including wires,
hoses, gaskets, o-rings, fuses, hardware, and more.
Features:
• Precise interlocking jaws for a strong grip
• Slim profile design for tight access areas
• Extended length for greater versatility
• Surgical-grade stainless steel construction
JULY
GENERAL TOOLS 9
PIPE CUTTERS COMPACT
Features:
• Metal handle
• Impact-resistant design
• Four grooved support rollers for close-to-flare cuts, precise telescopic
guidance and quick adjustment of working range
• Steel-mounted spindle
• Cutting wheel quick-change system, adjustable without tools
• Interior deburrer can be pushed out and rotated
• Cutting depth: 3mm
Description
Size
1/8 - 5/8"
(3 - 16mm)
1/4 - 1"
(6 - 25mm)
Pipe Cutters Compact
Art. No.
Benefits:
• Adapts to the contour of the workpiece
• Uniform working radius
P. Qty
714.551117
1
714.551127
Areas of application:
• Copper, brass, aluminum and thin-walled steel pipes, rigid plastic and plasticcoated pipes
Additional tools:
Replacement blade for compact pipe cutters
3-16mm & 6-25mm
Art. No. 714.551910
P. Qty: 10
30" BOLT CUTTER
Art. No. 714.0682
Industrial bolt cutter.
• Ideal for cutting rod, bolts, concrete form ties and
fencing wire.
• Hardened alloy steel jaws.
• Length: 30”.
P. Qty. 1
SHEET METAL SHEARS
Levered sheet metal shears with two-part plastic handle. Ideal
shears for continuous and figure cutting.
• Handle sections made of two-part plastic
(Item 1).
Prevents slipping of hand.
• Bottom handle section made of one-part plastic (Item 2).
The sliding of fingers over the bottom handle is made possible when opening
and closing the handle.
• Ridges on the handles prevent the shears slipping out of one’s hand (Item 3).
Secure guidance of the sheet metal shears.
• Cutting head made of special stainless steel, drop-forged. Cutting edges
inductively hardened (Item 4).
Long service life.
• Non-toothed cutting shape (Item 5).
Minimal force required, no slipping of the sheet.
• With leverage transfer.
High cutting force with low force application.
3
1
4
5
3
Model
L in mm
Right-hand cutting
260
10 NEW! WURTH.CA
Cutting capacity up to (mm)
Sheet steel
Stainless steel
1.8
1.2
2
Art. No.
P.
Qty.
713.03100
1
2017
ANGLED GEAR
Art. No. 614.9000
Powerful angled screwing gear for screwing and drilling work.
Suitable for use with electric drills and battery-operated driver
drills.
• High quality angled gear.
Specially hardened steel enables maximum torque of up to
57 Nm (42 ft-lb) or maximum speed of 2000 rpm.
• Handle with soft grip.
Secure hold and 360° adjustable handle. Optimum
adjustment to respective work application.
• Compact design.
Excellent for screwing in cramped and hard-to-reach places.
• Magnetic 1/4" bit mount with
quick-change chuck.
Secure holding of screws with magnetic effect.
Suitable for all standard bits and bit drills with C6.3 and E6.3 mount.
• Mount: 1/4" hexagon (E6.3).
• Dimensions: 1
65 x 32 x 50 mm
(L x W x H)(6.5" x 1.25" x 2")
3
4
1
2
Fast, simple 360° adjustment of handle for high flexibility.
MINI CHUCK
Art. No. 713.9204 - P. Qty. 1
• 1/4" hex shaft for use with Angled Gear, Art. No. 614.9000
• Drill size range: 0.4 mm - 6 mm (1/64" - 5/64")
• Suitable for both left and right-hand rotation
JULY
GENERAL TOOLS 11
HAND TOOL KIT - 91 PIECES
Art. No. 965.93120
Würth’s main goal is to offer high quality products
and innovative solutions to simplify the day-to-day
operations of our clients. Ease of use and high quality
have been behind the success of Zebra hand tools
for many years. They offer good economy for optimal
service life even in the harshest conditions.
This kit offers everything all the metric tools you need in
your daily work. Perfect for mobile operations.
423 x 360 x 86 mm
Description
Combination spanner, 11 pieces: 8, 9, 10, 11, 12, 13, 14, 16, 17, 19, 22 mm
Combination pliers 180 mm
Hammer, 400 g
Water Pump Pliers, 250 mm
Voltage tester 3.0 mm, 150 - 250 Volt
1/4" Ratchet 135 mm
1/4" Cardan Joint
1/4" Extension 50 + 100 mm
1/4" Socket Wrench Insert, 12 parts: 4; 5; 5,5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm
1/2" Ratchet 250 mm
1/2" Cardan Joint
1/2" Extension 125, 250 mm
1/2" Socket Wrench Insert, 19 pieces: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 26, 27, 28,
30, 32 mm
Screwdriver 1/4" drive
Flat Screwdriver, 0.6 x 3.5 x 100 mm
Flat Screwdriver, 1.2 x 6.5 x 150 mm
Phillips Screwdriver PH 1
Phillips Screwdriver PH 2
1/4" Bit Adapter
Bit Assortment, 30 pieces:1 x AW 10, 25, 30 / Internal Hex. 3,4,5 mm / TX 15, 40 •1 x Slot 4.5 x 0.6; 5.5
x 0.8; 6.5 x 1.2 mm • 2 x AW 20 / PH1, 2 / PZ1 / TX 10, 20, 25, 30 • 3 x PZ 2
Bit Holder, 51 mm
Art. No.
713.30108 to 713.30122
715.01575
715.73140
714.0271
715.5305
712.0140
713.118301
713.118102/104
713.111104 to 713.111114
712.0120
712.138301
712.138105/110
712.131110 to 712.131132
613.430310
613.231735
613.231065
613.23201
613.23202
614.176680
614 prefix
614.176711
Note: Articles in red are special orders only
12 NEW! WURTH.CA
2017
POWERDRIV
®
For secure gripping and high
transmission of force.
POWERDRIV®
The POWERDRIV® system was developed to
meet the particularly high demands of the aviation
industry in order to provide the highest level of fit
tolerances.
The POWERDRIV® system enables a high
transmission of forces at the ring and reduces wear
on the bolt heads.
FOR 3
GOOD
REASONS
Precision
POWERDRIV®
Far above DIN
• The tight tolerances of the widths
across flats guarantees greater
reliability and safety when used
intensively.
The principle
The POWERDRIV® does not
grip bolt heads at the corner
as is usually the case, rather it
grips the sides. This enlarges the
driving flat and permits a higher
transmission of force. After
overturning, widths across flats
remain within DIN specifications.
• The service life of the screws
is increased markedly,
as stripping of heads is
prevented.
• Even old and rusty screws
can be loosened virtually
trouble-free with the
POWERDRIV® without
rounding off.
2
Without POWERDRIV® = linear pressure
High-quality material
• Extremely resilient high-quality chrome-vanadium steel.
• Nickel pretreatment achieves optimum chrome adhesion, even under the
heaviest mechanical stresses.
• Rounded finish prevents sharp corners and edges.
• Matte chrome plating ensures a good grip even in oily hands.
With POWERDRIV®
= Surface pressure
Overturning values above DIN:
Highest overturning values for the most
extreme conditions.
3
1
JULY
GENERAL TOOLS 13
RATCHET COMBINATION WRENCH
Innovative wrench with ratchet function on
the ring and open sides.
• Drive: Ring-side POWERDRIV® modified12-point,
open side with open ratchet segment.
• Standard: max. torque as per DIN 899.
• Material: Chrome-vanadium-steel.
• Surface: polished, chrome-plated.
• Geometry: straight on ring side, 15° angle on open
side. To change the turning direction, simply turn the
wrench around.
Areas of use:
Designed for union screw joints, e.g. brake lines,
injection lines, air conditioning, hydraulics etc.
Dia. in mm
L in mm
a1 mm
a2 mm
8
9
10
11
12
13
14
15
16
17
18
19
140
149
158
165
171
178
190
199
208
225
236
247
4.1
4.3
4.8
5.1
5.3
5.9
6.3
6.6
6.9
7.3
7.8
8.3
6.5
6.9
7.3
7.7
8.2
8.6
9.0
9.4
9.9
10.3
10.7
11.2
dia. d in
mm
16.8
18.8
20.8
21.8
22.8
24.8
27.8
28.8
30.8
31.8
32.8
33.8
b1 mm
Art. No.
P. Qty
16.7
18.7
20.8
23.5
24.6
26.8
29.0
31.0
33.0
35.5
37.5
39.4
0714 259 08*
0714 259 09*
0714 259 10*
0714 259 11*
0714 259 12*
0714 259 13*
714.25914**
0714 259 15*
0714 259 16*
0714 259 17*
0714 259 18*
0714 259 19*
1
1
1
1
1
1
1
1
1
1
1
1
*Special order only ** In stock
Use:
• Open side features moving ratchet segment
Enables working without stopping, as the wrench no
longer needs to be taken off the nut. Ideal for all line
screw joints.
14 NEW! WURTH.CA
• Fine-toothed on ring side, 72 teeth, 5°
rotating angle.
Very rugged and strong ratchet for high tightening
torques.
2017
Ratchet Combination Set
Set
6
Dia. in mm
8,10,12,13,17, 19 in
plastic holder
Art. No
714.25950
P.
Qty
1
FLEXIBLE RATCHET RING WRENCHES
Flexible ratchet head, metric version.
Power take-off: ring end POWERDRIV® bihexagonal,
fine pitch, 72 teeth
Material: Chrome-Vanadium steel
Surface finish: bright polished, chrome-plated
Geometry: open end offset 15°, ring end 180° joint,
sturdy heads for heavy duty use
Application: loosen screws with open end, unscrew
with ratchet mechanism of ring end
Attention: This is a special tool that may not be
subjected to loads in excess of maximum torque
values. For that reason, the tool is of limited suitability
for loosening of tight screws.
Note: Articles in red are Special Orders only!
* Available in the set, Art. No. 714.25350
mm
8
10
11
12
13
14
15
16
17
18
19
L
mm
a1
mm
a2
mm
ød
mm
b1
mm
140
159
165
172
178
191
200
208
226
237
248
4.9
5.6
6.0
6.1
6.7
7.1
7.4
7.7
8.1
8.5
9.1
6.5
7.3
7.7
8.2
8.6
9.0
9.4
9.9
10.3
10.7
11.2
15.9
19.1
20.6
21.7
23.6
25.9
27.2
28.7
30.5
31.5
39.7
16.7
20.9
23.0
25.1
27.7
29.3
31.3
33.4
35.5
37.6
39.7
F Max
Nm
35
59
74
91
109
131
153
179
205
235
266
ft-lb
25
43
54
67
80
96
112
132
151
173
196
Art. No.
P. Qty.
714.25308*
714.25310*
714.25311
714.25312*
714.25313*
714.25314
714.25315
714.25316
714.25317*
714.25318
714.25319*
1
The 180° articulated joint of the ring wrench allows
easy and flexible access to work, even in tight areas.
SET OF FLEXIBLE RATCHET RING WRENCHES
Set
6 pcs.
mm
8, 10, 12, 13, 17, 19
Art. No.
P. Qty.
714.25350
1
JULY
GENERAL TOOLS 15
METRIC DOUBLE RING RATCHET WRENCH SET
Innovative double-sided, double-ended
ratcheting wrench.
Drive: double-ring side POWERDRIV® bi-hex, finetoothed, 72 teeth, one-hand operation via reversing
lever for clockwise and counterclockwise use.
Material: chrome-vanadium steel.
Surface: chrome-plated, high gloss polished.
Geometry: ring side straight.
Set (comes in a clear plastic blister pack)
8x10+12x13, 16x17+18x19
3 pcs.
Bit adapter: 10 mm x 1/4", 20 mm long
Set Contents: (available separately through Special Orders)
L in mm
a1 in
mm
in mm
8x10 +12x13
160
8
16x17+18x19
230
11
Bit adapter: 10 mm x 1/4", 20mm long
a2 in
mm
b1 in
mm
b2 in
mm
d1 in
mm
d2 in
mm
12
18
9
11
15
20
21
33
26
35
Size 12
Size 8
Size 13
Size 10
Size 19
Size 17
Size 18
Size 16
Art. No.
P. Qty.
714.25730
1
Art. No.
P. Qty.
714.257013
714.257019
715.1103
1
1
1
• Four sizes per ratchet wrench.
The most common sizes are covered by only two
ratchet wrenches.
• 1/4" bit adapter available.
Simply insert in size10 mm ratchet wrench; can
then be used as a bit ratchet.
• Narrow ratchet head.
For hard-to-reach areas.
5° angle of rotation for working
in the tightest of spaces.
Precision-machined ring core for
smooth and secure use.
Eight
sizes
2x4
36 mm
SCREWDRIVER WITH FLEXIBLE SHAFT
For hex head screws.
mm
6
7
16 A mm
150
150
NEW! WURTH.CA
B/C mm
96/31
106/35
A inch
6"
6"
Art. No.
Qty.
613.28606
613.28607
1
2017
• Shaft: round, flexible.
• Drive: for hex head screws.
• Head: bright nickel-plated, interior bore for
protruding threads.
• Standard: DIN 3125.
• Application: in tight spaces, hose clamps.
• Suitable for all Prefix 539 clamps.
* Formerly Art. No. 613.007
ZEBRA SCREWDRIVER SET
With hexagon blade and spanner nut, for automotive and
metal working.
Art. No. 613.94226
Art. No.
0.6 x 3.5 x 75
1.0 x 5.5 x 100
1.2 x 6.5 x 125
1.6 x 8.0 x 150
613.421035
613.421055
613.421065
613.42108
Qty.
1
PH 1
PH 2
Art. No.
Qty.
613.4221
613.4222
1
* Articles in red must be ordered through Special
Orders.
PRECISION SCREWDRIVER SET
Art. No. 613.4892
mm
Art. No.
0.30 x 1.5 x 40
0.4 x 2.0 x 60
0.4 x 2.5 x 75
0.5 x 3.0 x 75
0613 480 015
0613 480 020
0613 480 025
0613 480 030
PH 00
PH 0
PH 1
Art. No.
Qty.
0613 481 00
0613 481 0
0613 481 1
1
1
1
7 piece set
Special Order Only
PRECISION TORX SCREWDRIVER SET 7PCS
Art. No. 613.4891
Blade: Round blade, matte chrome-plated.
Tip: Internal TX, Black Point
TX 5
TX 6
TX 7
TX 8
TX 9
TX 10
TX 15
Note: Articles in red are special orders only
JULY
Art. No.
613.48205
613.48206
613.48207
613.48208
613.48209
613.48210
613.48215
Qty
1
GENERAL TOOLS 17
REVOLVER LED SCREWDRIVER
Complete screwdriver assortment with the most common bits, a
broad range of adapters and socket wrench inserts.
Art. No. 613.64037 - 37 piece
ZEBRA®2-component gun grip for ergonomically-optimized
working conditions.
• Can be used as a “standard screwdriver” in the straight position or in the 60°
gun position thanks to the adjustable grip.
• The grip is secure and comfortable to hold in the gun position and is optimally
positioned to the screw.
LED technology.
• The working area is always well lit. Light falls directly onto screw connection.
• Especially suitable for dark areas.
High-performance ratchet screwdriver.
• No more regripping required. And that enables fast,efficient operation in any
assembly situation.
• 45 teeth, max. torque of40 Nm.
Sealing cap with bit magazine for a total of six bits.
• Storage space in handle, 1/4“bits with Würth color coding system for fast
location of bits.
Large number of different adapters, bit holdersand socket wrench
inserts.
• Contains the right short or long version for any application, also with telescopic
magnet.
Contents
Designation
Tip
Gun Screwdriver, LED light
with short, magnetic bit
holder, 70 mm
Length (size) in mm
Art. No.
164
0613 640 0
P. Qty
Designation
Tip
Length (size) in mm
Art. No.
1/4" Bits
0614 176 651
Foam Insert
-
270 x 155 x 35
0955 640 37
PZ 1
Metal Box
-
280 x 165 x 45
0955 12 371
PZ 2
0614 176 652
Slotted 0.8x5.5mm
0614 175 653
Slotted 1.2x8.0mm
0614 175 656
TX 10
0614 311 0
TX 15
0614 311 5
1/4" socket wrench inserts, hexagon
Size 4 mm
0713 111 104
Size 5 mm
0713 111 105
Size 5.5 mm
0713 111 155
Size 6 mm
0713 111 106
Size 7 mm
0713 111 107
Size 8 mm
22
0713 111 108
TX 20
1
25
TX 25
0614 312 0
0614 312 5
0713 111 109
TX 27
0614 312 7
Size 10 mm
0713 111 110
TX 30
0614 313 0
Size 11 mm
0713 111 111
TX 40
0614 314 0
Size 12 mm
0713 111 112
Allen Head, 3 mm
0614 176 93
Size 13 mm
0713 111 113
Allen Head, 4 mm
0614 176 94
Size 14 mm
0713 111 114
Allen Head, 5 mm
0614 176 95
Allen Head, 6 mm
0614 176 96
Size 9 mm
1/4" bits
PH 1
PH 2
25
0614 176 274
1/4" - adapter parts
0614 176 461
Extension
70 mm
Extension
150 mm
0613 711
Magnetic bit holder
150 mm
0613 712
Flexible bit holder
175 mm
0613 713
105 - 485 mm
0613 714
0614 176 648
PH 3
Telesc. magn. holding
force 600 g
18 NEW! WURTH.CA
P. Qty
2017
-
0613 710
1
T-HANDLE ASSORTMENT
Art. No. 613.630400 - Qty. 1
4 in 1
T-handle screwdriver
+ High-performance ratchet
screwdriver
+ Reversible or adapter bits
+ Socket-wrench inserts
Reversible bit assortment:
Select an appropriate bit - insert it in the
handle - you’re done!
• 2-component T-handle
Ergonomically adapted handle. It lies comfortable
in the hand and ensures fatigue-free working.
• High-performance ratchet screwdriver.
No more regripping required. And that enables
fast, efficient operation in any assembly situation.
• Large numbers of different reversible blades,
adapter, bit-holders and socket-wrench inserts.
Contains the right tool for any application, and
also includes a flexible bit holder.
• High-quality reversible blades.
High top strength thanks to special treatment.
With Würth colour coding systems for fast locating.
Black-point tip for highly precise fit.
All reversible, adapter and bit-holder blades have
a 1/4" / 6.3 mm hex mount.
Broad range of tools for any application.
• Ratchet function.
Very rugged design, max. torque
up to 40 Nm (29.5 lb-ft).
• Flexible bit-holder blade.
Especially suitable for working
in inaccessible areas.
Contents, 21 pieces:
Length
Designation
Tip
T-Handle Ratchet screwdriver
11 socket-wrench inserts,
hexagon
1 each 5; 5.5; 6; 7; 8; 9; 10;
11; 12; 13; 14 mm
Size
Art. No.
85 mm
613.63040
22 mm
P. Qty.
Designation
713.111105
to
713.111114
Length
Size
Art. No.
P. Qty.
Flexible bit holder
613.713
Blade PH 1 - PH 2
613.8091
Blade TX10 - TX15
613.8092
Blade TX20 - TX 25
1
Tip
175 mm
613.8093
Adapter blade
150 mm
613.711
Blade TX30 - TX 40
613.8094
Magnetic bit holder
150 mm
613.712
Blade Allen head 4 - 5
613.8095
Blade PZ2 - Slot 6 mm
613.8096
Foam insert
275 x 160 x 40
955.630400
Foam insert
275 x 160 x 40
955.12371
1
Note: Items in red are special order only
JULY
GENERAL TOOLS 19
ZEBRA 3-K SCREWDRIVER SET, 5 PIECES
Art. No. 613.9015 - Qty. 1
The flexible 3-component handle ensures
perfect ergonomics, power transmission and
working comfort.
in mm
1.0 x 5.5
1.2 x 7.0
1.6 x 9.0
A
in mm
B/C
in mm
in mm
in inches
100
125
150
96/31
106/35
114/38
6/10
6/10
8/13
7/32 x 4"
9/32 x 5"
11/32 x 6"
Art. No.
Qty.
613.200055
613.20007
613.20009
1
Blade: One-piece hexagon blade, matte chrome-plated;
wrench aid matte nickel-plated, hardened impactresistant.
Large impact cap.
Flat Screwdriver:
Tip: DIN 5264-A, ISO 2380 with "black point" tip.
Phillips Screwdriver:
Tip: DIN 5260-PH, ISO8764-PH with "black point" tip.
Würth colour coding system on wrench aid.
A
in mm
80
100
PH1
PH2
B/C
in mm
96/31
106/35
in mm
5/8
6/10
in inches
3-1/8"
4"
Note: Articles in red are special orders only!
613.2011
613.2012
1
T-HANDLE RATCHET SCREWDRIVER
With 10-piece bit strip + PH 2 bit.
• Handle: 2 component handle.
• Blade: Long bit holder blade with magnet, bright
chrome-plated.
• Tip: 1/4" hex (DIN 3126-D 6.3)
Use of the T-handle with high loosening torque or
high tightening forces.
• Rugged ratchet function with 45 teeth.
Max. torque up to 40 Nm (29.5 lb-ft).
• 3-position adjustment wheel. Can be adjusted with
one hand.
Simple change of direction during work possible
without using the other hand.
Bits included (1 each):
1/4"
5.5
4 mm, 5 mm
PH 1, PH 2
in inches
1/4"
20 NEW! WURTH.CA
A1
B
C
A2
Art. No.
P. Qty.
95 mm
3-3/4"
85 mm
3-11/32"
100 mm
3-15/16"
10 mm
25/64"
613.63040
1
2017
TX 10, TX 15, TX 20, TX 25, TX 30
ALLEN KEY WITH BALL HEAD SET 9PCS
Art. No. 715.40100
9 extra-long Allen keys (one-sided ball head) in plastic holder with
sliding function.
Sizes: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm
• Plastic holder with sliding function for one-handed opening of the holder.
• Allen keys with an angle of max. 25°
Slide top part to the right
Tilt the desired key
forwards and remove it
PHILLIPS DRIVE BITS
Threaded screws
(thread dia.)
Self-tapping screws
(thread dia.)
2.6 mm
3.0 mm
3.5 mm
4.0 mm
2.2 mm
2.9 mm
3.5 mm
3.9 mm
4.2 mm
4.8 mm
5.5 mm
5.0 mm
6.0 mm
8-10 mm
• Hex shank 1/4".
• Threaded screws: DIN7985, DIN965, DIN966.
• Self-tapping screws: DIN7981, DIN7982,
DIN7983.
• High-speed construction screws.
• Manufactured from impact-resistant hardened steel
for maximum durability.
High-speed
construction screws
(thread dia.)
3.5 mm
3.9 mm
4.2 mm
5.0 mm
Drive Size
L 25 mm
Art. No.
P. Qty.
PH 1
PH1
PH 2
PH 2
PH 2
PH 2
PH 3
PH 4
614.176274
614.176274
614.176461
614.176461
614.176461
614.176461
614.176648
614.176750
5
5
5
5
5
5
5
3
EXTRA LONG PHILLIPS DRIVE BITS
Drive
Size
PH 2
PH 3
Length 4" (102 mm)
Art. No.
614.6425
614.6427
Qty.
1
1
#0
#1
#2
#3
L=1"
Art. No.
614.99901
614.99911
614.99921
614.99931
L=2"
Art. No.
614.99902
614.99912
614.99922
614.99932
L=3"
Art. No.
614.99903
614.99913
614.99923
614.99933
P. Qty.
614.6421
614.6421
614.6424
614.6424
614.6424
614.6424
614.6423
5
5
5
5
5
5
5
• Hex shank 1/4".
• Manufactured from impact-resistant hardened
steel for maximum durability.
Length 6" (152 mm)
Art. No.
614.6426
614.6428
Qty.
1
1
ROBERTSON SQUARE RECESS DRIVE BITS
Drive
size
L 50 mm
Art. No.
L=4"
Art. No.
L=6"
Art. No.
614.99914
614.99924
614.99934
614.99916
614.99926
614.99936
JULY
• Hex shank 1/4".
• Manufactured from impact-resistant hardened steel
for maximum durability.
P. Qty.
5
GENERAL TOOLS 21
TORX DRIVE BITS
• Hex shank 1/4" or 5/16"
• Bosch, Hitachi, Black & Decker, AEG, Metabo,
Makita, ELU, Atlas-Copco.
A
A
A max
in mm
3.86
4.43
4.99
5.52
6.65
7.82
11.22
Hex Shank
Drive size
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
5/16"
TX 20
TX 25
TX 27
TX 30
TX 40
TX 45
TX 55
L 25 mm
Art. No.
P. Qty.
614.4000
614.4050
614.4100
614.4200
614.4250
614.4350
3
3
3
3
3
3
L 70 mm
Art. No.
614.3320
614.3325
614.3330
P. Qty.
2
2
2
AW DRIVE BITS
• Hex shank 1/4".
AW Drive
• Better torque transmission.
• Longer service life.
• Optimized centring.
• Largest possible contact surface of the bit in the
drive socket.
• Even distribution of force avoids damage to the
surface protective plating helping with corrosion
resistance.
Wood screws
(thread dia.)
3.0
3.5-5.0
6.0-7.0
8.0-12.0
Self-tapping screws
(thread dia.)
2.9
3.9-4.2
4.8-5.5
6.3
8.0
Drive
size
AW10
AW20
AW25
AW30
AW40
L= 25 mm
Art. No.
614.5110
614.5120
614.5125
614.5130
614.5140
P. Qty.
2
2
2
2
2
L=50 mm
Art. No.
614.5210
614.5220
614.5225
614.5230
614.5240
P. Qty.
2
2
2
2
2
ONE TOUCH BIT HOLDER - 1/4"
Art No. 614.176638
Easy release and change of bit.
22 NEW! WURTH.CA
Push down
the button to
release the bit.
The strong magnet will magnetize the bit,
securing a firm hold of the screw.
The bit will shoot
forward, allowing
easy removal.
Diameter of only 10mm.
2017
With a soft push on the button, the bit will shoot
forward due to the internal spring and position itself for
easy removal. A new bit can then quickly be inserted.
Especially for jobs that require different bits the new
One Touch Bit Holder is a simple but unique product
that makes changing bits very fast and easy.
• Extra strong magnet holds the screw in place.
• The One Touch Bit Holder can be operated with
gloves.
• Packed in clear PVC box for safe storage.
• Stainless steel housing.
SECURITY TORX BIT ASSORTMENT
Art. No. 614.250352
6 Drive Sizes Included (TX 10, 15, 20, 25, 30, 40); with inside hole.
Security Torx Screws are used in applications to prevent
unauthorized tampering.
Applications:
Air bags, ABS brakes, ignition systems, etc., protective barriers, guide rails,
Plexiglas panes, bus stops, park benches, school furniture, school bus repair
and manufacturers, etc., distributor boxes, switch boards, charging units, air
conditioning units, domestic appliances, telephones, etc.
UNIVERSAL BIT SET
Art. No. 614.250500
•
•
•
•
•
•
•
JULY
90 pieces.
1/4” drive.
Magnetic.
Includes all standard drive styles and safety screws.
Includes 1/4” drive magnetic ratchet adapter.
In sturdy metal box.
Comes in foam insert to keep the bits nicely organized.
GENERAL TOOLS 23
UNIVERSAL BIT SET WITH EXTENSIONS 105PCS
Art. No. 614.250300
Extensive 1/4" bit assortment with most common
standard and safety bits in short and long versions.
• A majority of the bits are for safety screws. Used wherever
unauthorized loosening is to be prevented.
• Includes two bit adapters and one screw hook.
• The solution for virtually all screw types.
• In practical metal box with foam insert for all hand-guided or machine bits.
Areas of Application:
Public facilities, motor vehicle and motorcycle sector, plumbing applications,
construction industry, electrical, electronics and machine sector.
Designation
AW®
AW®
AW®
AW®
AW®
Slotted
Slotted
Slotted
Slotted
PH
PH
PH
PH
PZ
PZ
PZ
PZ
TX
TX
TX
TX
TX
TX
TX
TX
TX
Allen Head
Allen Head
Allen Head
Allen Head
Allen Head
Allen Head
Allen Head
Allen Head
TX with hole
24 Tip
10
20
25
30
40
0.6 x 4.5 mm
0.8 x 5.5 mm
1.2 x 6.5 mm
1.2 x 8 mm
0
1
2
3
0
1
2
3
8
10
15
20
25
27
30
40
45
2 mm
2.5 mm
3 mm
4 mm
5 mm
6 mm
1/4"
7 mm
8
NEW! WURTH.CA
Length
25 mm
25 mm
Art. No.
614.5110
614.5120
614.5125
614.5130
614.5140
614.175652
614.175653
614.175655
614.175656
614.176270
614.176274
614.176461
614.176648
614.176640
614.176651
614.176652
614.176653
614.3108
614.3110
614.3115
614.3120
614.3125
614.3127
614.3130
614.3140
614.31451
614.17692
614.176925
614.17693
614.17694
614.17695
614.17696
614.176963
614.17697
614.352608
Qty
1
2
1
1
1
1
1
1
1
1
2
3
1
1
2
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Designation
TX with hole
TX with hole
TX with hole
TX with hole
TX with hole
TX with hole
TX with hole
Claw Wrench
Three-wing
XZN
Allen head in inches
Allen head w hole
Allen head w hole
Square
Clutch
Slotted
PH
PH
Three-wing
Three-wing
Claw wrench
Claw wrench
TX with Hole
TX with Hole
TX with Hole
TX with Hole
TX with Hole
Five-star with Hole
Five-star with Hole
Five-star with Hole
Screw Hooks
Bit Adaptor
Magnetic Bit Holder
2017
Tip
10
20
25
27
30
40
45
4/6/8/10
1/2/3/4
6/8/10
M4/5/6/8
1/8", 9/64" 5/32", 3/16"
M5/6/7/8
2/2.5/3/4 mm
5/6/7 mm
1/2/3/4
3/32", 1/8", 5/32"
0.8 x 5 mm
1
2
1
2
6
8
10
15
20
25
30
20
25
30
1/4"
1/4"
Length
70 mm
26 mm
30 mm
70 mm
Art. No.
614.352610
614.352620
614.352625
614.352627
614.352630
614.352640
614.352645
614.250302
614.250303
614.250304
614.250305
614.250306
614.250307
614.250308
614.250309
614.250310
614.250311
614.175662
614.176774
614.176775
614.176301
614.176302
614.176406
614.176408
614.3610
614.3615
614.3620
614.3625
614.3630
614.176420
614.176425
614.176430
614.176400
614.176680
614.176702
Qty
1
1
1
1
1
1
1
4
4
3
4
4
4
4
3
4
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
BIT SET WITH HOLDER
Art. No. 614.206 - 16 bits
• Contains 16 popular bits with AW, slotted,
Robertson, Phillips and Pozi Drive styles.
• 25 mm (1”) bit length.
• Also includes a 1/4” magnetic universal
extension, 74 mm long (3”).
• 5 empty slots allow you to add extra bits (Prefix
614).
• Belt clip keeps set secure, and within easy reach
on the job .
Drive Style
Drive Size
AW 10
AW 20
AW 25
0.6 x 4.5
1.0 x 6.0
1.2 x 8.0
Qty.
1
1
1
1
1
1
R2
2
PH 1
PH 2
PH 3
PZ 1
PZ 2
PZ 3
1
2
1
1
2
1
1/4" E6.3, 74 mm long, stainless steel sleeve
1
UNIVERSAL HOLDERS WITH QUICK CHANGE CHUCK
Quick-change mechanisms provide a firm connection between holder and bit. Only a slight forward motion of the locking sleeve is needed to
unlock the bit for a quick change.
Socket
Image
Drive
1/4 E
6.3
Length mm
Fits the following machines
Art. No.
P. Qty
51
Würth, Bosch, Skil, Atlas Copco, Ingersoll, Hitachi,
Makita, AEG, Metabo, Black & Decker, Deprag
614.176711
1
EXTENDED LENGTH NUTSETTERS
• Extended length nutsetters.
• Magnetic.
• Hex shank 1/4".
Hex size
1/4"
5/16"
3/8"
7/16"
1/2"
1/4”
7 mm
8 mm
10 mm
Outside
diameter
11
12
14
Length
1-7/8"
1-7/8"
1-7/8"
1-7/8"
1-7/8"
2”
51 mm
51 mm
51 mm
Art. No.
614.6360
614.6365
614.6366
614.6367
614.6368
614.176726
614.176714
614.176715
614.176717
JULY
Length
2-9/16"
2-9/16"
2-9/16"
2-9/16"
2-9/16"
Art. No.
614.6370
614.6375
614.6376
614.6377
614.6378
P. Qty.
2
1
GENERAL TOOLS 25
MAGNETIC NUTSETTERS
Features:
• Permanent high strength Alnico magnet.
• High quality tool steel.
• Heat treated for long life.
Hex Opening Size
1/4“
5/16"
3/8"
Hex Shank Size
1/4“
1/4“
1/4“
Length
6" (inches)
6" (inches)
6" (inches)
Art. No.
614.6379
614.6380
614.6381
Qty.
1
STANDARD & METRIC MANUAL RIVNUT SETTER ASSORTMENT
Art. No. 948.8005
13" nut/thread setting hand riveter kit with 3 metric and
4 SAE nosepieces and rivnut assortment.
A.
Features:
• Patented structure increases power and reduces shock.
• Shorter handle with double compound hinges that maximize leverage.
• Includes Hand Nut/Thread Setting Riveter.
• 7 interchangeable mandrel/nosepiece sets in Metric and in SAE
• Includes 10 pieces of each of the following rivet nuts: M5, M6, M8,10-24,
1/4-20, 5/16-18, and 3/8-16
• Versatile and powerful hand nut/thread setting riveter, takes the hard work out
of setting rivet nuts.
• Ideal for working in hard-to-reach area
• Ergonomic grip for easy operation.
• Comes with a convenient hard shell carrying case
P. Qty: 1
B.
Metric Size
5mm - 0.8
6mm - 1.0
8mm -1.25
SAE Size
10 - 24
1/4 - 20
5/16 - 18
3/8 - 16
A. Nosepiece
Art. No.
948.800501
948.800500
948.800502
B. Mandrel
P. Qty
1
A. Nosepiece
Art. No.
948.800503
948.800504
948.800505
948.800506
Art. No.
948.800508
948.800507
948.800509
P. Qty
1
B. Mandrel
P. Qty
Art. No.
P. Qty
1
948.800510
948.800511
948.800512
948.800513
1
Note: This item is replacing Art. No. 948.81442 Standard/Manual
Rivnut Gun Kit which is now discontinued. All nosepieces and mandrels
are compatible with the discontinued Art. No.
PREMIUM HAND HELD RIVETER
Art. No. 915.11
Universal, hand-held steel riveting pliers with exchangeable
mouth pieces for the installation of commercial rivets made of
aluminum, copper, steel and stainless steel.
Features:
• Diameters of 4.0mm and 4.8mm
• Requires low exertion of force in case of short lever distance
• Particularly well-suited for hollow profiles.
P. Qty: 1
Additional tools:
Mouth piece, 4.0mm blind rivet, Art. No.
P. Qty: 1
Mouth piece, 4.8mm blind rivet, Art. No. 915.150
P.Qty: 1
Replacement clamping jaws, Art. No. 946.10
P. Qty: 1
26 NEW! WURTH.CA
Technical data
Length, mouthpiece mounting (including mouthpiece)
Diameter, mouthpiece mounting
2017
52mm
19mm
RIVET GUN
Art. No. 915.12
Long nose rivet gun
HEAVY DUTY RIVET GUN
Art. No. 949.120
For blind rivets
Features:
• Nose: 1/8” - 1/4”
Additional tools:
Nose piece for 3/16" Monobolts Art. No. 949.12013824
Recommended:
Use with Art. No. 502.11620, 502.11621, 502.12653 and Prefixes
932 & 945
RIVET GUN FOR PEEL TYPE RIVETS
Art. No. 949.13
For setting 3/16” and 1/4” rivets.
Recommended:
Use with Art. No. 502.11620, 502.11621, 502.12653 and Prefixes 932
& 945
Additional tools:
Nose piece for 1/4" 'Peel Type' rivets, Art. No. 949.1311853
Additional tools:
Replacement jaws, Art. No. 949.1314799
RIVET GUN FOR PLASTIC AND NYLON RIVETS
Art. No. 949.2
A durable tool that sets all sizes with a single stroke.
Features:
• All steel construction.
• 6-1/2” overall length.
Note: Not for use with metal rivets.
JULY
GENERAL TOOLS 27
SPEEDPRESS 8T RIVETER AND ACCESSORIES
Adjustable speed control
Adjustable pressure control
Automatic air powered riveter specially designed to perform common riveting tasks in modern bodyshops on all
Aluminum, Steel and Combination/Hybrid body vehicles. Works with Self-Piercing Rivets, Flow-form Rivets and Solid Rivets. Virtually
maintenance free with 100% no oil leakage.
Kit Contents
Description
SpeedPress 8T Riveter
HR2 360° arm
Arm extension
for HR1S and HR2
Locking pin for arms
Plastic handle
Shoulder strap
Shoulder strap bracket
Wurth exclusive die set
(27 pieces)
SPR starter kit (120 pieces)
Heavy duty carrying case
Art. No.
Not Sold Separately
920.HR2
Art. No. 920.1000
P. Qty
Features:
• 8 Tonnes of pressure
• 4 second cycle time
• Integrated pressure gauge
• Speed and pressure controls
• Closed hydraulic system
• Magnetic die system
• Installation, extraction and punching capabilities
• 360° swivel arm function
920.HR12EX
920.1LP
920.1PH
920.1SS
1
Not Sold Separately
Contents of the Wurth Exclusive Die Set are
*listed on the following accessory pages
Benefits:
• Adjustable pressure settings prevent panel distortion
• Adjustable speed settings for precision and productivity
• Fast and easy arm and die changes
• Efficient and user-friendly
• More versatile than any other tool on the market
Applications:
• Self-Piercing Rivet installation and extraction
• Flow form Rivet punching and installation
• Solid Rivet installation and extraction
• Blind Rivet extraction
SPR starter kit (120 pieces)
Rivet Size
(mm)
5.3 x 5.0
5.3 x 6.0
5.3 x 7.0
5.3 x 8.0
3.35 x 4.0
3.35 x 5.0
Art. No.
919.5360
919.5365
919.5375
919.5350
919.33540
919.33550
P. Qty
20
Most
used on
Ford
Ford
Ford
Ford
Audi
Audi
Areas of application:
• Aluminum & Steel
MFG. Part No.
W708713-S900
W708714-S900
W710246-S900
W708717-S900
4D0803217Q
4D0803217N
Vehicle applications:
• Ford
• Volkswagen|Audi
• Mercedes
• BMW
• Jaguar|Land Rover
Note: Full range of SPR's available -- see prefix 919.
28 NEW! WURTH.CA
2017
SpeedPress 8T Riveter Accessories
Wurth Exclusive Die Set
Install and extract with factory
precision. High strength steel
and rugged design provide
a solution built to last.
Contents: 27 pieces
Note: The Wurth Exclusive Die Set
is only available as part of Art. No.
920.1000.
x2
Kit Contents
A1 Die
A2 Die
B1 Die
B2 Die
B3 Die
D4 Die
D13 Die
D17 Die
Pairs
with
A2
A1
B2
B1
B2
Rivet Size
in mm
E2
All
6
D17
E1 Die
E2
E2 Die
F1 Die
F2 Die
F3 Die
F4 Die
F5 Die
T1 Die
T2 Die
T3 Die
T4 Die
Center punch
Spare elastomer ring
Assembly keys
E1,D13
F2
F1
F4
F3,F5
F4
T2
T1
T4
T3
Rivet Type
3.3
5.3
SPR
4.8
All
Solid
N/A
SPR
6
Flow-form
8
Flow-form Style 1
Flow-form Style 2
6
8
Flow-form
Pressure
in Bar (b)
Die Type
Magnetic Holding
Forming
Magnetic Holding
Forming
Magnetic Holding
3–5.2
4.7–5.8
Main use
Audi, BMW, Ford
BMW, Jaguar|Land Rover, Ford
Jaguar|Land Rover, Ford
Extraction
Audi, Ford
Extraction Straightener Dolly
All brands & models
Audi, BMW, Jaguar|Land Rover, Mercedes,
Ford
Audi, BMW, Jaguar|Land Rover
Extraction
Extraction Receiver
Holding
Forming
Holding
Forming
Holding
Hole Punch
3–8
Mercedes
3–5.2
Hole Punch Receiver
4.7–5.8
Hole Punch
Art. No.
P. Qty
920.A1
920.A2
920.B1
920.B2
920.B3
920.D4
920.D13
920.D17
1
2
920.E1
920.E2
920.F1
920.F2
920.F3
920.F4
920.F5
920.T1
920.T2
920.T3
920.T4
1
4
2
JULY
GENERAL TOOLS 29
SpeedPress 8T Riveter Accessories
Speedpress 8T Riveter Arms
High strength forged steel arms provide a total repair solution.
Sizes and styles designed to suit all bodywork profiles.
HR3 Arm - SpeedPress 8T
HR2 Arm - SpeedPress 8T
HR1S Arm - SpeedPress 8T
345
390
216
43
121
130
240
236
170
81
81
HR1S Arm - SpeedPress 8T
Description
HR1S Arm - SpeedPress 8T
HR2 Arm - SpeedPress 8T
HR3 Arm - SpeedPress 8T
30 NEW! WURTH.CA
141
HR3 Arm - SpeedPress 8T
HR2 Arm - SpeedPress 8T
Length
in mm
121
236
390
Width
in mm
50
Height
in mm
170
216
345
Caliper
opening in mm
81
141
2017
Opening
depth in mm
40
130
240
Weight
in kg
2
4
9
Art. No.
P. Qty
920.HR1S
920.HR2
920.HR3
1
DIE SETs -- Make specific
Volkswagen | Audi die set
Art. No. 920.VWDS
Contents: 33 pieces
Install and extract with factory
precision. High strength steel and
rugged design provide a solution
built to last.
For use with SpeedPress 8T Art. No.
920.1000
Kit Contents
A1 Die
B1 Die
D1 Die
D2 Die
D3 Die
D4 Die D5 Die
D6 Die
D7 Die
D8 Die
D9 Die
D10 Die
D11 Die
D12 Die
D13 Die
D15 Die
D16 Die
D17 Die
E2 Die
S1 Die
S3 Die
S4 Die
S5 Die
S7 Die
S8 Die
Spare elastomer ring
Assembly keys
Pairs with
S3
S7,S8
D2
D1,D3,
S1
D2,D5
D5
D3,D4,
S4,S5,D12
D7
D6
D8,D9
D8
D11
D10
D5
E2
D16
D15
D17
E1,D13
D2
A1
D5
D5
B1
B1
Rivet Size in mm
3.3
5.3
Rivet Type
3.3
SPR
Die Type
Magnetic Holding
Pressure in Bar (b)
3–5.2
4.7–5.8
Extraction
All
5.3
3–8
All
Blind
4
Solid
8
Spot Weld
SPR
Punch Out
Extraction
3–8
Solid
Punch and Forming
5.3–8
N/A
Straightener Dolly
Extraction Receiver
Extraction
Forming
3–5.2
Extraction
3–8
Forming
4.7–5.8
Punch and Forming
6
All
3.3
3.5
SPR
920.D3
920.D4
1
920.D5
Extraction/Punch Receiver
Extraction
Extraction Receiver
Dolly & Straightener
Forming
P. Qty
920.D2
Extraction Receiver
Extraction
Art. No.
920.A1
920.B1
920.D1
5.3–8
3–8
5.3–8
3–8
5.3
920.D6
920.D7
920.D8
920.D9
920.D10
920.D11
920.D12
920.D13
920.D15
920.D16
920.D17
920.E2
920.S1
920.S3
920.S4
920.S5
920.S7
920.S8
2
1
2
1
4
2
JULY
GENERAL TOOLS 31
DIE SETs -- make specific
BMW die set
Art. No. 920.BMWDS
Contents: 12 pieces
Install and extract with factory precision.
High strength steel and rugged design
provide a solution
built to last.
For use with SpeedPress 8T Art. No. 920.1000
Kit Contents
Pairs with
A1 Die
A2 Die
B1 Die
B2 Die
E1 Die
E2 Die
Spare elastomer ring
Assembly keys
A2
A1
B2
B1
E2
E1
Rivet Size
in mm
Rivet Type
Die Type
SPR
Magnetic Holding
Forming
Magnetic Holding
Forming
Extraction
Extraction Receiver
3.3
5.3
All
Pressure
in Bar (b)
3–5.2
4.7–5.8
3–8
Art. No.
P. Qty
920.A1
920.A2
920.B1
920.B2
920.E1
920.E2
1
4
2
Jaguar | Land Rover die set
Art. No. 920.JLRDS
Contents: 12 pieces
Install and extract with factory precision.
High strength steel and rugged design
provide a solution
built to last.
For use with SpeedPress 8T Art. No. 920.1000
Kit Contents
Pairs with
B2 Die
B3 Die
D17 Die
E1 Die
E6 Die
Spare elastomer ring
Assembly keys
B3
B2
D17
E6
E1
32 NEW! WURTH.CA
Rivet Size
in mm
Rivet Type
4.8
SPR
N/A
All
SPR
Die Type
Forming
Magnetic Holding
Straightener Dolly
Extraction
Extraction Receiver
Pressure
in Bar (b)
4.7–5.8
3–8
Art. No.
920.B2
920.B3
920.D17
920.E1
920.E6
P. Qty
1
2
1
4
2
2017
DIE SETs -- make specific
Mercedes Benz die set
Art. No. 920.MRCDS
Contents: 15 pieces
Install and extract with factory precision.
High strength steel and rugged design
provide a solution
built to last.
Kit Contents
Pairs with
E3 Die
E4,E5
E4 Die
E5 Die
F1 Die
F2 Die
F3 Die
F4 Die
F5 Die
T1 Die
T2 Die
T3 Die
T4 Die
HR3 arm extension
Assembly keys
E3
E3
F2
F1
F4
F3,F5
F4
T2
T1
T4
T3
Rivet Size
in mm
6
8
6
8
Rivet Type
Extraction
Flow-form
6
8
6
8
Die Type
Flow-form Style 1
Flow-form Style 2
Flow-form
Pressure
in Bar (b)
Extraction Receiver
Holding
Forming
Holding
Forming
Holding
Hole Punch
3–8
3–5.2
Hole Punch Receiver
Hole Punch
4.7–5.8
Art. No.
P. Qty
920.E3
920.E4
920.E5
920.F1
920.F2
920.F3
920.F4
920.F5
920.T1
920.T2
920.T3
920.T4
920.HR3EX
1
2
JULY
GENERAL TOOLS 33
SINGLE HAND SUCTION HANDLE
Art. No. 715.5801 - Qty. 1
•
•
•
•
Weight: 320 g.
Diameter suction handle: 130 mm
Load capacity: approx. 30 kg.
Power direction of the suction disc: vertical.
SUCTION LIFTER
Art. No. 715.58015
One-hand suction with quick release button.
Fast and efficient working
• Thanks to a one-hand operation and quick suction.
Also suitable for sensitive glass panes.
• Because of the low vacuum volume, thin glass panes can also be held/
transported without being damaged.
For holding/transporting smaller objects
• Because of smaller diameter of suction head
• Lifts up to 8kg.
34 NEW! WURTH.CA
2017
RATCHET WITH SWITCH LEVER
1
Rugged design with convenient quick
release function
2
Coarse toothing with 48 teeth – 7.5°
rotating angle!
Easy direction change for right and
left direction.
Secure locking with quick release
to lock.
3
4
Low lying and protected reversing
lever.
Secure locking with quick release
to unlock.
Description
Size
1/4"
3/8"
1/2"
Ratchet with switch lever
Features:
• Fast, simple reversing of clockwise and
counterclockwise rotation with lever.
• Low-lying, protected reversing lever for fast left/
right switching with one hand.
• Offset ratchet body allows more clearance for
gripping.
• Ergonomic design of the handle.
• Quick release for fast socket change and ball
locking device.
Art. No.
712.01401
712.03801
712.01201
STUBBY GEARLESS RATCHETS
• Short handle with reversible square drive.
• Head: overrun, turning angle less than 3°.
• For tight spaces, e.g. engine compartments,
motorcycles, tool making, fine mechanics, kitchen
construction, adjustment work.
• Chrome-molybdenum steel.
Drive
1/4”
3/8”
L1 mm
77
106
L2 mm
93
67
B1 mm
9
11
B2 mm
16
23
D1 mm
21
27
JULY
D2 mm
14
16
Fmax Nm
43
162
Art. No.
713.110111
713.120111
P. Qty
1
GENERAL TOOLS 35
1/2" HAMMER RATCHET
Art. No. 712.01205
Saves time and money with 2 tools in one!
Features:
• Fast, simple switchover.
• Low-lying, protected reversing lever and offset ratchet
body for more clearance for gripping.
• 1/2" drive (12.5 mm)
• 48 teeth
• Meets the DIN 3122 and IOS 3315 standards
Applications:
• High-bay shelfing construction, commercial vehicles and
maintenance, scaffolding construction, road construction,
etc. Especially for aligning work pieces.
The particular innovation of this tool is its
combination of ratchet and hammer. With its highquality workmanship, it has an extremely versatile
and sturdy appeal.
RATCHET ADAPTER ASSORTMENT
Art. No 965.1280 – 8 pcs.
Combined adapter assortment with most
common socket-wrench and bit adapters.
• Chrome-plated finish
• Square drive
Socket adapters
Ratchet Drive
3/4"
1/2"
1/2"
3/8"
1/4"
3/8"
Bit adapters
1/4"
3/8"
36 NEW! WURTH.CA
Socket Drive
1/2"
3/4"
3/8"
1/2"
3/8"
1/4"
1/4"
5/16"
Qty.
1
1
2017
3/8" STANDARD HEX SOCKET ASSORTMENT
Art. No. 965.1219 - 19 pcs
• Supplied in a metal box and a high-quality foam insert to hold each piece in
place.
• Box: 315 x 115 x 40 mm.
NOTE: Articles in red are Special Orders only!
Designation
Ratchet
Extension bar
Extension bar
Universal joint
Tip
Length
250 mm
125 mm
250 mm
55 mm
Art. No.
712.0380
712.128105
712.128110
712.128301
Qty.
1
1
1
1
Designation
15 sockets
Metal box
Foam insert
3/8” High-Performance Ratchet
• Easy handling and maximum service life.
• Drive: 10 mm / 3/8”.
• Standard, DIN 3122, ISO 3315.
• Head: fine-toothed, 72 teeth, 5° rotating angle.
• Chrome-plated with anti-slip 2-component handle resistant to general workplace
oils and cleaners.
• Top quality, tested by German TÜV SÜD product service.
• Handy directional switch for easy switching, even with oily fingers; can be
operated with one hand.
• Chamfer on square enables easier pull-off as better gripping is possible.
• Offset ratchet body enables more clearance for gripping with screw
connections.
Inch
1/4
9/32
5/16
11/32
3/8
7/16
1/2
9/16
19/32
5/8
11/16
3/4
25/32
13/16
7/8
L1 mm
D1 mm
D2 mm
t
mm
Art. No.
Qty.
25.5
25.5
25.5
25.5
25.5
25.5
25.5
27
27
27
27
29
29
29
31
10
10.9
11.8
13
14.3
16
18.4
20
20.9
22
23.9
25.6
27.1
27.9
30
17
17
17
17
17
17
17
18
19
20
21
22.5
23.5
24.5
26
7
8
8
8
8
8
9
14
14
14
14
15
15
15
17
713.121201
713.121202
713.121203
713.121204
713.121205
713.121206
713.121207
713.121208
713.121209
713.121210
713.121211
713.121212
713.121213
713.121214
713.121215
1
Tip
-
Sizes
Art. No.
Qty.
1/4" - 7/8"
712.121201713.121215
1
315 x 115 x 40 mm
310 x 110 x 35 mm
955.7152
955.1219
1
1
3/8” Universal Joint
• Standard: DIN 3123, ISO 3316.
• Finish: chrome-plated.
• Input drive: 3/8”, ball groove.
• Output drive: 3/8”.
• Joint: spring-loaded, stays in set position.
3/8” Extension Bars
• Standard: DIN 3123, ISO 3316.
• Finish: chrome-plated.
• Input drive: 3/8” ball groove.
• Output drive: 3/8”.
JULY
GENERAL TOOLS 37
1/2" STANDARD HEX SOCKET ASSORTMENT
Art. No. 965.1321 - 21 pcs
• Supplied in a metal box and a high-quality foam insert to hold each piece in
place.
• Box: 405 x 160 x 50 mm.
Note: Articles in red are Special Orders only!
Designation
Ratchet
Extension bar
Extension bar
Universal joint
Tip
Length
250 mm
125 mm
250 mm
70 mm
Art. No.
712.0120
712.138105
712.138110
712.138301
Qty.
1
1
1
1
Designation
38 L1 mm
D1 mm
D2 mm
t
mm
Art. No.
Qty.
38
38
38
38
38
38
38
38
38
38
41
41
41
44
44
44
44
16.1
17.9
19.1
20.6
21
22.9
24.6
26.5
27.9
28.5
29.9
32
34
36
37.7
40
42
21.9
21.9
21.9
21.9
21.9
21.9
21.9
24.7
25.5
25.5
26.5
29
30
32.2
33.5
36
38.1
12
12
12.5
13
13
13
13
19
19
19
22.5
22.5
22.5
25.5
25.5
25.5
25.5
712.131201
712.131202
712.131203
712.131204
712.131205
712.131206
712.131207
712.131208
712.131209
712.131210
712.131211
712.131212
712.131213
712.131214
712.131215
712.131216
712.131217
1
NEW! WURTH.CA
Sizes
17 sockets
Metal box
Foam insert
1/2” High-Performance Ratchet
• Easy handling and maximum service life.
• Drive: 12.5mm / 1/2”.
• Standard, DIN 3122, ISO 3315.
• Head: fine-toothed, 72 teeth, 5° rotating angle.
• Chrome-plated with anti-slip 2-component handle resistant to general workplace
oils and cleaners.
• Top quality, tested by German TÜV SÜD product service.
• Handy directional switch for easy switching, even with oily fingers; can be
operated with one hand.
• Chamfer on square enables easier pull-off as better gripping is possible.
• Offset ratchet body enables more clearance for gripping with screw
connections.
Inch
3/8
7/16
1/2
9/16
19/32
5/8
11/16
3/4
25/32
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
Tip
3/8" - 1-1/4"
-
405 x 160 x 50 mm
400 x 150 x 40 mm
1/2” Universal Joint
• Standard: DIN 3123, ISO 3316.
• Finish: chrome-plated.
• Input drive: 1/2”, ball groove.
• Output drive: 1/2”.
• Joint: spring-loaded, stays in set position.
1/2” Extension Bars
• Standard: DIN 3123, ISO 3316.
• Finish: chrome-plated.
• Input drive: 1/2” ball groove.
• Output drive: 1/2”.
2017
Art. No.
712.131201713.131217
955.7153
955.1321
Qty.
1
1
1
DOUBLE-RING RATCHET SPANNER SET
Art. No. 714.23100 - 32 pcs
Special tool assortment for use in tight spaces.
Note: Articles in red are Special Orders only!
Designation
Double-ring ratchet 1/4" and 10 mm
drives
Double-ring ratchet, 1/4" and 10 mm
drives
Bit
Adapter 10 mm x 1/4"
Length in mm
200
Art. No.
714.23101
110
714.23102
22
715.1102
Allen head, size 4 mm
Allen head, size 5 mm
Allen head, size 6 mm
PH 1
PH 2
PH 3
Can be used with bits and sockets.
• Double-function special ratchet with
1/4” and 10 mm mount.
Designation
10 mm Drive bits:
TX 30
TX 40
TX 45
XZN M 5
XZN M 6
955.23100
955.7151
Foam insert 215 x 105 x 30 mm
Metal box 22 x 110 x 35 mm
1/4" Drive bits:
TX 15
TX 20
TX 25
TX 27
Slot 5.5 mm
Slot 8.0 mm
P. Qty.
614.3115
614.3120
614.3125
614.3127
614.175653
25
Bit
XNZ M 8
1
617.175656
614.17694
614.17695
614.17696
614.176274
614.176461
614.17648
Special low ratchet height.
• In comparison to conventional 1/4”
ratchets.
Art. No.
P. Qty.
614.788830
614.788840
614.788845
614.788405
614.788406
30
614.788408
Allen head, size 7 mm
614.788307
Allen head, size 8 mm
614.788308
1/4" sockets, hexagon:
Size 6 mm
Size 7 mm
Size 8 mm
Size 9 mm
Size 10 mm
Size 11 mm
Size 12 mm
Size 13 mm
Size 14 mm
713.111106
713.111107
713.111108
713.111109
713.111110
713.111111
713.111112
713.111113
713.111114
Special offset ratchet spanner with
optimum working length of 110 mm
or 200 mm.
• Especially suitable for tight
working areas, e.g. door hinges,
engine compartments and
toothed belt covers.
JULY
Length in mm
22
1
Fine-toothed ratchet enables screwing in
and out in the smallest of spaces.
• Clockwise and counter-clockwise
rotation can be switched with one
hand.
GENERAL TOOLS 39
GO-THROUGH METRIC SOCKET SET
Art. No. 713.1300 - 14 pcs
• Problem solver for narrow spaces, because of very low height.
• With through-hole, ideal for long bolts and threaded rods.
• With 2 adaptors (1/4" and 3/8") standard sockets can also be used.
• Supplied in a metal box and a high-quality foam insert with clamping effect.
NOTE: Articles in red are Special Orders only!
Designation
Ratchet
Extension
Adapter 1/4"
Adapter 3/8"
10 sockets,
10-19 mm
Foam insert
Metal box
Sockets
Bit: Hexagon, metric, powerdriv.
Model: chrome-plated, polished.
Length in mm
205
76
26
30
Art. No.
713.13001
713.13002
713.13003
713.13004
713.13010 713.13019
955.1300
955.7151
32
220 x 105 x 30
225 x 125 x 35
P. Qty.
1
1
1
1
1
1
1
Ratchet
Head: 72 teeth, 5° rotating angle, round, compact head, one-hand operation with
reversing lever for clockwise and counter-clockwise operation.
Model: chrome-plated, polished, very slim design.
D1
D2
L1
D2 mm
32
32
32
32
32
32
32
32
32
32
7
7
7
8.5
9.5
11.5
12
12
12
12
14.7
15.4
16.6
17.7
18.9
20.1
21.2
22.4
23.6
24.8
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
Art. No.
P. Qty.
713.13010
713.13011
713.13012
713.13013
713.13014
713.13015
713.13016
713.13017
713.13018
713.13019
1
Low height of the through-ratchet as compared to the
standard ratchet.
40 NEW! WURTH.CA
D1
D1 mm
B1
B2
t
mm
L1
L1 mm
B1 mm
B2 mm
D1 mm
D2 mm
205
7
11.5
24.7
32.5
Art. No.
713.13001
P. Qty.
1
48 mm
L1 mm
33 mm
in mm
10
11
12
13
14
15
16
17
18
19
D2
t
Thanks to the through-hole, long bolts and threaded
rods can be processed.
2017
Through-ratchet with adapter ejector enables an easy
removal of the socket spanner.
1/2" DRIVE TORX/XZN/ALLEN SOCKET ASSORTMENT
Complete 1/2" assortment with short and long Allen, inner TX
and multipoint XZN sockets. Contents especially matched to
automotive and cargo applications.
Art. No. 965.13310 - Qty. 1
Hard foam with clamping effect
Art. No. 955.13310
Metal box 350 x 260 x 55 mm
(13-3/4" x 10-1/4" x 2-3/16")
Art. No. 955.7154
Contents: 31 pieces
8 TX socket wrenches, short version
TX 25, 27, 30, 40, 45, 50, 55, 60
4 TX socket wrenches, long version
TX 30, 40, 50, 60
4 XZN multipoint socket wrenches, short version
M 5, 6, 8, 10
3 XZN multipoint socket wrenches, long version
M 8, 10, 12
8 Allen socket wrenches, short version
5, 6, 7, 8, 10, 12, 14, 17 mm
4 Allen socket wrenches, long version
6, 8, 10, 12 mm
JULY
GENERAL TOOLS 41
1/2" MULTI-SOCKET SPANNER ASSORTMENT
Art. No. 965.13023 - 23 pieces
• Supplied in a metal box and a high-quality foam insert to hold each piece in
place.
• Box: 405 x 160 x 50 mm
(approx.: 16 x 6 5/16 x 2”).
Note: Articles in red are Special Orders only!
Designation
Ratchet
Extension Bar
Extension Bar
Universal Joint
Tip
Length
250 mm
125 mm
250 mm
70 mm
Art. No.
712.012
712.138105
712.138110
712.138301
1/2” Universal Joint
• Standard: DIN 3123, ISO 3316.
• Finish: chrome-plated.
• Input drive: 1/2”, ball groove.
• Output drive: 1/2”.
• Joint: spring-loaded, stays in set position.
1/2” Extension Bars
• Standard: DIN 3123, ISO 3316.
• Finish: chrome-plated.
• Input drive: 1/2” ball groove.
• Output drive: 1/2”.
Qty.
Designation
19 multi-sockets, 1 ea.,
10-32 mm
Metal box
Foam insert
1
Tip
Length
36 - 44 mm
405 x 160 x 50 mm
400 x 150 x 40 mm
• Standard, DIN 3122, ISO 3315.
• Head: fine-toothed, 72 teeth, 5° rotating angle.
• Chrome-plated with anti-slip 2-component handle
resistant to general workplace oils and cleaners.
• Top quality, tested by German TÜV SÜD product
service.
• Handy directional switch for easy switching, even
with oily fingers; can be operated with one hand.
• Chamfer on square enables easier pull-off as better
gripping is possible.
• Offset ratchet body enables more clearance for
gripping with screw connections.
1/2” High-Performance Ratchet
• Easy handling and maximum service life.
• Drive: 12.5mm / 1/2”.
Possible uses
Multiprofile
6/12 sided/12
Outside
Torx
6 sided
4-sided
Note: This is a metric set. Standard sizes are only approximate
equivalencies and may not work in all applications!
L1
D1
D2
t
in mm
in mm
bolt sz
head sz
in TX
in mm
in mm
in mm
in mm
in mm
10
11
12
13
14
15
16
17
18
19
20
21
22
24
26
27
28
30
32
10
11
12
13
14
15
16
17
18
19
20
21
22
24
26
27
28
30
32
1/4"
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
3/4"
-
3/8"
7/16"
15/32"
1/2"
9/16"
19/32"
5/8"
3/4"
25/32"
13/16"
7/8"
15/16"
1-1/16"
1-1/8"
1-3/16"
-
E12
E14
E16
E18
E20
E22
E24
E26
E28
E30
E32
E34
E36
E38
E40
8 mm
9 mm
10 mm
12 mm
13 mm
14 mm
16 mm
17 mm
18 mm
19 mm
21 mm
22 mm
23 mm
24 mm
26 mm
36
36
36
36
36
36
36
36
36
36
36
38
38
38
38
44
44
44
44
15.5
16.7
18
19.2
20.5
21.7
23
24.2
25.5
26.7
28
29.2
30.5
33
35.5
36.7
38
40.5
43
23
23
23
23
23
23
23
23.2
23.5
24.7
25.5
26
26.5
29
31.5
32.2
33.5
36
38.1
9
10
11
11
13
13
13
13
14
14
14
14
16
18
18
20
20
22
24
42 NEW! WURTH.CA
2017
Art. No.
712.13410
712.13411
712.13412
712.13413
712.13414
712.13415
712.13416
712.13417
712.13418
712.13419
712.13420
712.13421
712.13422
712.13424
712.13426
712.13427
712.13428
712.13530
712.13432
Qty.
1
Art. No.
712.13410712.13432
955.7153
955.13230
Qty.
1
3/8" MULTI-SOCKET SPANNER ASSORTMENT
Art. No. 965.12022 - 22 pieces
• Supplied in a metal box and a high-quality foam insert to hold each piece in
place.
• Box: 315 x 115 x 40 mm
(approx.: 12-3/8 x 4-1/2 x 1-9/16").
Note: Articles in red are Special Orders only!
Designation
Ratchet
Extension Bar
Extension Bar
Universal Joint
Tip
Length
175 mm
125 mm
250 mm
55 mm
Art. No.
712.038
713.128105
713.128110
713.128301
3/8” Universal Joint
• Standard: DIN 3123, ISO 3316.
• Finish: chrome-plated.
• Input drive: 3/8”, ball groove.
• Output drive: 3/8”.
• Joint: spring-loaded, stays in set position.
3/8” Extension Bars
• Standard: DIN 3123, ISO 3316.
• Finish: chrome-plated.
• Input drive: 3/8” ball groove.
• Output drive: 3/8”.
Qty.
Designation
18 multi-sockets, 1 ea.,
6-22 mm
Metal box
Foam insert
1
Tip
3/8” High-Performance Ratchet
• Easy handling and maximum service life.
• Drive: 10mm / 3/8”.
• Standard, DIN 3122, ISO 3315.
• Head: fine-toothed, 72 teeth, 5° rotating angle.
• Chrome-plated with anti-slip 2-component handle
resistant to general workplace oils and cleaners.
• Top quality, tested by German TÜV SÜD product
service.
Length
25.5 - 31 mm
315 x 115 x 40 mm
312 x 113 x 34 mm
Art. No.
713.12306 713.12322
955.7152
955.12022
Qty.
1
• Handy directional switch for easy switching, even
with oily fingers; can be operated with one hand.
• Chamfer on square enables easier pull-off as better
gripping is possible.
• Offset ratchet body enables more clearance for
gripping with screw connections.
Possible uses
Multiprofile
6/12 sided/12
Outside
Torx
6 sided
4-sided
Note: This is a metric set. Standard sizes are only approximate
equivalencies and may not work in all applications!
L1
D1
D2
t
in mm
in mm
bolt sz
head sz
in TX
in mm
in mm
in mm
in mm
in mm
6
6.3
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
6 mm
6.3 mm
7 mm
8 mm
9 mm
10 mm
11 mm
12 mm
13 mm
14 mm
15 mm
16 mm
17 mm
18 mm
19 mm
20 mm
21 mm
22 mm
1/4”
5/16”
3/8”
7/16”
1/2”
9/16”
-
1/4”
9/32”
5/16”
11/32”
3/8”
7/16”
15/32”
1/2”
9/16”
19/32”
5/8”
3/4”
25/32”
13/16”
7/8”
E8
E10
E12
E14
E16
E18
E20
E22
E24
E26
E28
5 mm
8 mm
9 mm
10 mm
12 mm
13 mm
14 mm
16 mm
17 mm
18 mm
25.5
25.5
25.5
25.5
25.5
25.5
25.5
25.5
25.5
27
27
27
27
27
29
29
29
31
9.3
9.9
10.9
11.8
13.4
14.6
15.9
17
18.4
19.6
20.9
22
23.4
24.5
25.6
26.8
27.9
29.6
17
17
17
17
17
17
17
17
17
18
19
20
21
21.5
22.5
23.5
24.5
26
7
7
7
8
8
8
8
8.5
8.5
13
13
13
13
13
14
14
14
16
JULY
Art. No.
713.12306
713.123063
713.12307
713.12308
713.12309
713.12310
713.12311
713.12312
713.12313
713.12314
713.12315
713.12316
713.12317
713.12318
713.12319
713.12320
713.12321
713.12322
Qty.
1
GENERAL TOOLS 43
1/4" MULTI-SOCKET SPANNER ASSORTMENT
Art. No. 965.11032 - 32 pieces
• Supplied in a metal box with high-quality foam insert compartment with
clamping effect.
• 12 sockets.
• 14 1/4” bits.
Designation
Ratchet
Extension
Extension
Universal joint
Screwdriver handle
Drive
Length
138 mm
100 mm
150 mm
33 mm
216 mm
Art. No.
712.0140
713.118104
713.118106
713.118301
613.430311
Adapter with quick change
chuck
30 mm
715.1101
12 multi-use sockets, 4 14 mm
22 mm
713.11304713.11314
Bit PH 1
Bit PH 2
Bit PH 3
25 mm
714.176274
614.176461
614.176648
Qty.
Designation
1
1/4” Multi-Use Sockets
• Chrome plated; 1/4” square drive.
• Fits 5 different common head styles.
Drive
Bit slotted 0.8 x 5.5
614.175653
Bit hex. socket size 3
Bit hex. socket size 4
Bit hex. socket size 5
Bit hex. socket size 6
TX 10
TX 15
TX 20
TX 25
TX 30
TX 40
Metal box
Foam insert
614.17693
614.17694
614.17695
614.17696
614.3110
614.3115
614.3120
614.3125
614.3130
614.3140
955.7151
955.1132
25 mm
225x125x35mm
220x105x30mm
-
1/4” Universal Joint
• Chrome plated; ball groove; spring loaded joint.
1/4” Adapter
• Square socket input drive for use with ratchet to square drive.
• 1/4” hex socket output drive, universal holder for 1/4” bits.
1/4” Drive Screwdriver
• Round blade; ball groove.
Possible uses
6/12 sided/12
Art. No.
1/4” Extension Bars
• Chrome plated; ball groove.
1/4” High-Performance Ratchet
• Chrome-plated with anti-slip 2-component handle.
• Head: fine toothed; 72 teeth; 5° rotating angle.
Multiprofile
Length
Outside
Torx
6 sided
4-sided
Note: This is a metric set. Standard sizes are only approximate
equivalencies and may not work in all applications!
L1
D1
D2
t
in mm
in mm
bolt sz
head sz
in TX
in mm
in mm
in mm
in mm
in mm
4
5
5.5
6
7
8
9
10
11
12
13
14
size 4
size 5
size 5.5
size 6
size 7
size 8
size 9
size 10
size 11
size 12
size 13
size 14
#10, #12
1/4"
1/4"
5/16"
3/8"
5/32"
7/32"
9/32"
5/16"
11/32"
3/8"
7/16"
15/32"
1/2"
9/16"
E5
E8
E10
size 4
size 4.5
size 5
size 8
size 9
size 10
-
22
22
22
22
22
22
22
22
22
22
22
22
6.8
8.1
8.7
9.3
10.8
11.9
13.4
14.5
15.9
16.9
18
19.6
11.9
11.9
11.9
11.9
11.9
11.9
13.4
14.5
15.9
16.9
18
19.6
5
5
5.5
6
6
7
7
10
10
10
11
11
44 NEW! WURTH.CA
E12
E14
E16
E18
2017
Art. No.
713.11304
713.11305
713.113055
713.11306
713.11307
713.11308
713.11309
713.11310
713.11311
713.11312
713.11313
713.11314
Qty.
1
Qty.
1
1/4" SOCKET WRENCH SET
Art. No. 965.01427
Multi-functional spherical ratchet with
adjustable handle and the most commonly
used socket wrenches in a compact product
range.
Can be used like a conventional ratchet
with quick ejector or safety lock
Designation
Spherical Head Ratchet
9 Socket Wrench Inserts:
One each of 6; 7; 8; 9;
10; 11; 12; 13; 14
14 Socket Wrench Insert Bits: PH 1; PH 2; PH 3
Length in mm
145
Internal hex.: 4; 5; 6
TX: 10, 15, 20, 25, 27, 30, 40
Slotted: 1.0 x 5.5
Extensions
Cardan Joint
Foam Insert
Metal Box, size 1
25
25
25
50; 150
33
215 x 105 x 30
220 x 110 x 35
Art. No.
712. 01405
P. Qty.
0713 111 106
0713 111 114
0715 118 01
0715 118 03
0715 115 03–06
0715 113 10–40
0715 117 55
0715 118 102–116
0713 118 301
0955 014 27
0955 715 1
22
25
1
3 in 1!
Can be used like a conventional ratchet, as
a screwdriver or a T-handle
Features
• Drive: 6.3 – 1/4"
• Standard: DIN 3122, ISO 3315
• Head: 72 teeth, angle of rotation: 5°,joint can be
rotated 270°
• Handle: Two-component handle, straight or
adjustable 90° as T-handle
• Contents: 27 pieces
WÜRTH GRIPPER
Used for loosening and tightening bolts and nuts.
• All purpose applicable as socket spanner insert from SW7 to SW19 or SW13
to SW32.
• Replaces hexagon wrench, hexagon head and open-ended wrench.
• Saves an enormous amount of time and space.
• Thanks to its 54 spring loaded pins, it can firmly grip square-, hexagonal- and
Torx profiles as well as wing nuts, hook screws and eye bolts.
Note: It acts as a problem solving universal applicable tool, which can
be stressed only with the maximum torque. The tool does not replace
professional socket spanners.
7 -- 19 mm
3/8"
L in mm
Fmax in Nm
Art. No.
P. Qty
53.5
225
714.121907
1
JULY
GENERAL TOOLS 45
PANEL POPPER SET
Art. No. 714.58245 Qty. 12
Made from glass-fiber reinforced plastic, these tools are
designed to help with the safe and easy removal of door
trim panels, trim fasteners, body clips, mouldings etc.
• Designed and manufactured from high quality materials ensuring
surrounding trim areas are not damaged when trim is being removed
• Fits a comprehensive set of applications ranging from internal door
trims, facia and most other internal & external vehicle trims
• The panel popper kit works with European, Japanese and
Domestic trim applications and is not vehicle specific
• Set of 12 assorted Panel Poppers, supplied in a convenient roll-up pouch
Applications:
BODY CLIP REMOVAL PLIERS
Art. No. 714.500
• For easy removal of mouldings and bumper rubber strips.
• Does not damage the door lining.
• Blade Opening: 11 mm.
P. Qty: 1
46 NEW! WURTH.CA
2017
BODY VICE-GRIP PLIERS
“LL” Model
• For plug welding between the jaws.
• For use on door sills, wheel arches, roof skin, side
panels and problem areas.
• Suitable for U-profiles.
Clamping width
0 mm to 15 mm
Clamping depth
9 mm
Jaw width
40 mm
Length
210 mm
Art. No.
713.09300
Qty.
1
“W” Model
• For spot welding between openings.
• For use on door openings, side panels and folded
metal sheets.
Clamping width
0 mm to 15 mm
Clamping depth
36 mm
Jaw width
57 mm
Length
195 mm
Art. No.
713.09301
Qty.
1
“L” Model
• Especially suitable for work on curves thanks to the
slim shape.
• For use on door openings, lower center rear-end
parts, wheel arches and problem areas.
Clamping width
0 mm to 18 mm
Jaw width
18 mm
Length
195 mm
Art. No.
713.09302
Qty.
1
“J” Model
• For working on U-profiles and welds infolds.
• For use on center rear-end parts, rear side panels
and U-shaped body profiles.
Clamping width
0mm to 15 mm
Clamping depth
7 mm
Jaw width
18 mm
Length
205 mm
Art. No.
713.09303
Qty.
1
“JJ” Model
• With wide opening.
• For use on center rear-end parts and side panels,
for clamping “z-shaped” profiles, e.g. tail light
mounts.
Clamping width
0mm to 15 mm
Clamping depth
27 mm
Jaw width
40 mm
Length
230 mm
Art. No.
713.09304
JULY
Qty.
1
GENERAL TOOLS 47
COMPRESSED AIR BRUSH GRINDER
Art. No. 703.3600 - Qty. 1
Time saving system for removal of under body protection, sealing compounds,
paint, rust and film. Particularly well suited for
cleaning weld beads during repair work, paint and rust removal for all bodywork
areas, as well as removal of protective paint from repair panels.
Features:
• Flexible belts with high performance polyamide fabric backing and U-shaped
spring steel wires adapt well to edges and contours.
• High quality components.
• Excellent speed control by means of sensitive trigger.
• Compact, slim design for access to difficult areas.
• Auxiliary handle equally suited for right or left-handed work.
• Air exhaust exits to the rear.
Your advantages:
• No heating up of treated areas.
• No smearing or loading of the tool.
• Longer service life of the brushes.
• Significantly faster work progress.
• Versatile application possibilities due to various brush types.
• Very light and handy tool.
Brush Applications
Coarse Brush
23 mm: Art. No. 703.3501 - Qty. 1
11 mm: Art. No. 703.35051 - Qty. 1
Fine Brush
23 mm: Art. No. 703.3503 - Qty. 1
11 mm: Art. No. 703.35031 - Qty. 1
Coarse Brushes
Use for: removal of under body
protection and sealing compounds as
well as rapid paint removal. Especially
well-suited for cleaning weld beads,
contours and edges. Creates sand
blasting type finish, provides good
adhesion for tin-plating and fillers.
Fine Brushes
Use for: rust removal and cleaning,
removal of seals from grey casting.
Not suitable for aluminum and
aluminum die casting. Also used for
paint removal in contours and sharpedged areas with 90° angles. Does
not create sand blasting finish.
DBS Adaptor - 23mm
Art. No. 703.3602 - Qty. 1
DBS Adaptor - 11mm
Art. No. 703.36021 - Qty. 1
For use with: Art. No. 703.3501,
703.3503, 585.96, 585.91
For use with: Art. No. 703.35051,
703.35031
Nylon Abrasive Wheel
Use for: cleaning of weld seams,
metal surfaces, wood and plastics.
Removal of blooming discolouration,
cinder, rust, corrosion, dirt and oxide
layers, coatings, paint, synthetic resins,
adhesives, gasket residue, cement,
concrete residue. Preparing and
roughing of surfaces.
NEW! WURTH.CA
Rubber Wheels
Use for: removal of adhesive film,
decals and glue residue from metal and
paintwork. Twice the contact surface
compared to a conventional film
remover. This, and the higher speed,
results in significantly quicker removal
of material.
DBS Holder - Nylon Abrasive Wheel
For one disc: Art. No. 703.36023 - Qty. 1
For two discs: Art. No. 703.36022 - Qty. 1
For use with Art. No. 585.1100.
Use Art. No. 703.36023 to hold one wheel,
and 703.36022 to use two wheels
Note: DBS 3500 requires adaptor
(Art. No. 703.3602) to use the new Art.
No. 585.91 & 585.96 Eraser wheels.
48 Rubber Eraser Wheel
For water-based paints: Art. No.
585.96 - Qty. 1
For general use: Art. No. 585.91 Qty. 1
Nylon Abrasive Wheel
Art. No. 585.1100 - Qty. 1
2017
DBS 3600 ACCESSORIES
GRINDER ASSORTMENT
Art. No. 703.3601
Contents:
Description
DBS Brush Grinder
Coarse Brush (23 mm)
Coarse Brush (11 mm)
Fine Brush (23 mm)
Fine Brush (11 mm)
Nylon Fibre Grinding Disc
Rubber Eraser Wheel
Adaptor (23 mm)
Adaptor (11 mm)
Nylon abrasive wheel adaptor (single)
Nylon abrasive wheel adaptor (double)
DBS 3600 REPLACEMENT PARTS
Photo
Description
Art. No.
P.
Qty.
Toothed Drive Belt for
new DBS 3600
Schematic Picture #34
709.360034
1
Key for Spindle
Assembly
Schematic Picture #37
709.360037
2
Belt Drive Shaft Spindle Assembly
Schematic Picture #45
709.360045
1
Toothed Pulley Spindle Assembly
Schematic Picture #49
709.360049
Right-hand Bevel Gear
for Power Train
Schematic Picture #52
709.360052
Art. No.
703.3600
703.3501
703.35051
703.3503
703.35031
585.1100
585.91
703.3602
703.36021
703.36023
703.36022
Qty.
1
1
1
1
1
2
1
1
1
1
1
For tools purchased after May 2010
Photo
Left-hand Bevel Gear
for Motor with grooved
shaft
Schematic Picture #30
709.360030
1
Decoration Ring
Schematic Picture #62
709.360062
1
Description
Art. No.
P. Qty.
Toothed belt drive
Schematic # 51
703.30551
1
Bevel gear set
Schematic #31 & 32
703.350032
2
1
1
Note: A complete exploded view of the parts is available on Wurthnet\
Technical Information. Additional replacement parts are available
through Special Orders
JULY
GENERAL TOOLS 49
ANGLE GRINDER
Features:
• Compact and lightweight
• Vibration control handle reduces vibration up to 60%
• Rear handle trigger with lock-on/off switch for extended use applications
• Sealed switch keeps debris out of the switch mechanism
• Adjustable guard
• Epoxy coated field windings
Benefits:
• Powerful & durable for the most demanding jobs
• Provides uncompromising user comfort for extended periods of work
• Increases longevity of tool life
• Minder™ brushes eliminates guesswork, stops the tool when preventative
maintenance is required
• Efficient guard installation and adjustments
• Coated field windings provides the ultimate protection against abrasive dust
and metal debris
Technical data
Amperage
No load RPMs
Wheel diameter
Spindle thread
Length
Weight
4.5” Angle Grinder
6
11,000
4-1/2”
5/8” - 11
10-1/2”
3.75 lbs
5” Angle Grinder
9.5
11,000
5”
Contents:
• Guard
• Vibration dampening side-handle
14-3/4”
5.1 lbs
Description
Angle Grinder
Note: Does not have an automatic electronic clutch.
Size
4.5"
5"
Art. No.
008.1375
008.1821
P. Qty
1
PINSTRIPE REMOVAL TOOL
Art. No. 703.1208
Specialty tool developed for the removal of pinstripes, adhesive,
double faced tape and molding.
• Geared at 4,000 rpm.
• Lightweight - reduces operator fatigue.
• Spanner wrenches included for easy removal of pad.
Specifications:
• Disc capacity:
• Overall length:
• Air inlet thread NPT:
• Air hose I.D. size:
• Air pressure:
P. Qty: 1
50 NEW! WURTH.CA
2017
3-1/2”.
7-3/4” (197 mm).
1/4”.
3/8” (10 mm).
90-120 psi.
1/4" MEDIUM DIE GRINDER
1/4" 90° DIE GRINDER
Art. No. 703.210 - Qty. 1
Art. No. 703.00875
Features:
• Positive Grip - 1/4“ capacity collet chuck.
• Lever throttle for variable speed control.
• Compact and lightweight design.
• Front exhaust.
Features:
• Positive Grip - 1/4“ capacity collet chuck.
• Compact and lightweight design.
• Lever throttle for variable speed control.
• Rib textured handle provides a firm grip.
• Rear exhaust air flow system directs air away from work surface.
Specifications:
• Collet size: 1/4“.
• Free speed: 20,000 rpm.
• Overall length: 5“/127 mm.
• Net weight: 1 lbs/.45 kg.
• Motor: 1/3 hp.
• Air inlet thread NPT: 1/4“.
• Air hose I.D. size: 3/8“/10 mm.
• Avg. air consumption.: 3 cfm.
• Air pressure: 90-120 psi.
Specifications:
• Collet size: 1/4“.
• Free speed: 22,000 rpm.
• Overall length: 5-3/4“/146 mm.
• Net weight: 1-1/4 lbs/.6 kg.
• Motor: 1/3 hp.
• Air inlet thread NPT: 1/4“.
• Air hose I.D. size: 3/8“/10 mm.
• Avg. air consumption.: 4 cfm.
• Air pressure: 90-120 psi.
Note: Replaces
Art. No. 703.200
P. Qty: 1
P. Qty: 1
1/8" PENCIL TYPE DIE GRINDER
Art. No. 703.218
Features:
• Ideal for tight spots.
• Designed for high speed porting and finishing of small parts.
Specifications:
• Collet size: 1/8“.
• Free speed: 56,000 rpm.
• Overall length: 5-1/4“/133 mm.
• Net weight: 1/4 lbs./.11 kg.
• Air inlet thread NPT: 1/4“.
• Air hose I.D. size: 3/8“/10 mm.
• Avg. air consumption.: 4 cfm.
• Air pressure: 90-120 psi.
• Hose length: 5’.
P. Qty: 1
JULY
GENERAL TOOLS 51
6" HEAVY DUTY ORBITAL SANDER
Technical Information
Item
Pad size
Free speed
Overall length
Net weight
Spindle thread size
Air inlet thread NPT
Air hose I.D. size
Avg. air consumption
Air pressure
Stroke finish
Art. No. 703.307
Description
6”
10,000 rpm
7“ (17.78 cm)
1.5 lbs (.68 kg)
5/16” x 24
1/4”
3/8” (10 mm)
5.5 cfm
90 psi
3/32” (2.5 mm)
Features & Benefits:
• Sealed bearings for extended life
• Super lightweight and compact for minimum
operator fatigue
• Orbital action for final swirl-free finish
• Noise reduction design
• Low vibration
• Built-in speed regulator
• Comes with 6” PSA pad
P. Qty: 1
PNEUMATIC ANGLE GRINDER
DWS 115
Art. No. 703.000854
• For cutting or grinding discs from 1/16“-1/4“ thick with a 7/8“ bore.
• Light-weight ergonomically designed aluminum housing.
• Powerful 450-watt motor, mated to helical bevel gears, reduces vibration and
provides a long reliable operating life.
• Safety switch prevents accidental use.
• Load resistant speed control stabilizes speed and reduces air consumption.
• Spindle thread M14 x 2
•
•
•
•
•
•
•
•
Specifications:
Discs: 115 mm.
Speed: 12,000 rpm.
Avg. operating pressure: 63 psi.
Weight: 1.7 kg.
Length: 229 mm.
Avg. air consumption: 284 ion 1/min.
Connection thread: R 1/4“.
P. Qty: 1
3/8" REVERSIBLE AIR DRILL
Art. No. 703.15027
Features:
• 1,800 rpm.
• Lightweight compact size and is easy to handle.
• Reversible control lever for convenient, one-handed operation.
• Handle exhaust directs air away from work.
• Built-in muffler for noise reduction.
• Planetary gear system for long life.
Specifications:
• Chuck capacity: 3/8“.
• Free speed: 1,800 rpm.
• Overall length: 8“/203.2 mm.
• Net weight: 3 lbs/1.38 kg.
• Air inlet thread NPT: 1/4“.
• Air hose I.D. size: 3/8“/10 mm.
• Avg. air consumption.: 17 cfm.
• Air pressure: 90-150 psi.
P. Qty: 1
52 NEW! WURTH.CA
2017
1/2" IMPACT WRENCH
Art. No. 703.7360
Reliable, powerful impact wrench with fast torque build-up
Rugged and well balanced unit featuring an aluminum housing.
• Long service life and optimum center of gravity.
Rubber coated and ergonomically shaped handle, user friendly,
clockwise/counterclockwise switching and adjustable trigger.
• The handle temperature remains comfortable during work.
• The device is very handy and user-friendly.
High quality pin impact mechanism in oil tank with six vane
motor.
• Increased service life thanks to constant lubrication.
• Nearly vibration - free.
Technical data
Type
Square drive
Working torque
Maximum loosening torque
Average operating pressure
Weight
Dimensions (L x W x H)
Average air consumption
Connection thread
Minimum hose diameter
Sound pressure level =
DSS 1/2" H
1/2"
70 - 470 Nm / 52 - 346 ft. lbs
569 Nm / 420 ft. lbs
6.3 bar / 90 psi
2.3 kg
195 mm x 64 mm x 202 mm
102 L/min
1/4"
8 mm
92 db(A)
1 year warranty.
• On manufacturing and material defects.
P. Qty: 1
Recommended:
1/2” Impact sockets with magnet (set of 3)Art.
No. 714.13230
*The working torque is the torque usually achieved under average working
conditions. It depends on the highly varying ambient conditions (air pressure, hose
diameter, soiling etc.).
Accessories
Designation
1/2" Impact Socket Set
Art. No
714.13030
P. Qty.
3 pieces
*When used regularly, the machine should be lightly oiled via the compressed-air
supply every day. The use of a mist oiler is recommended.
1/2" IMPACT SOCKETS WITH MAGNET
Art. No. 714.13230
• For gentle installation of light metal rims. It is no longer possible to damage
the paint on the aluminum rims thanks to the plastic protection around the
sockets
• The magnet ensures the tight fit of nuts and bolts
• The spring guarantees maximum form closure thanks to length adjustment
• Color coding system makes it easier to recognize the size
• Contents: 3 pieces (17, 19, 21mm) in plastic case
JULY
GENERAL TOOLS 53
1/2" IMPACT SOCKET SET
For gentle installation of light metal rims. Long design with color
coding system.
Plastic sleeve
• No more damage possible to paint on the aluminum rims.
With plastic stop on the inside of the socket wrench insert.
• For protecting edges and surfaces on chrome plated wheel bolts.
Plastic sleeve with color coding system.
• Simplifies identification of the size, thereby reducing loss of work time.
Note: Use with 1/2" Impact Wrench Gun Art. No. 703.7360
Set
3 Piece
Dia. mm
17 mm
19 mm
PNEUMATIC IMPACT WRENCH
21 mm
Art. No.
714.13030
P. Qty
1
Art. No. 703.7750
Extremely rugged and powerful impact
wrench with quick torque buildup.
Ideal for tough applications, e.g. service
work on trucks and buses, construction
and agricultural equipment and industrial
maintenance and repair work.
Well-balanced device in rugged aluminum
housing.
Long service life and optimum center of gravity.
Technical Data
Type Square
drive
Working
torque*
DSS
1" P
9961,870
Nm
7341380
ft. lb
1"
Max.
Avg.
Weight
loosening operating in kg
torque
pressure
in bar
Dimensions
(L x W
x H)
in mm
2440
Nm
1,800
ft. lb.
305 x 104
x 276
6.3
10.93
Avg. air
consumption
in L/min.
Connection Minimum
thread in
hose dia.
inches
in mm
Sound
pressure
level in
dB (A)
Art. No.
370
1/2"
95
703.7750 1
11
P.
Qty
Rubber-coated and ergonomically-shaped
handle, 360°- rotatable additional handle,
user-friendly clockwise/ counterclockwise
switching and adjustable trigger.
The handle does not become cool during work.
The device is very handy and user friendly.
High-quality, high-performance pin impact
mechanism in oil tank with six-vane motor.
Increased service life thanks to constant lubrication.
Nearly vibration-free.
* The working torque is the torque usually reached under average working conditions.
It is dependent on the highly variable ambient conditions (air pressure, hose diameter, soiling etc.).
1-year warranty.
On manufacturing and material defects.
360°- rotatable
additional handle
Through-hole for locking
pin in 1" square
Ergonomic, rubber-coated
handle and 360°- rotatable
air intake
The clockwise/
counterclockwise switching
and the four tightening
torque levels enable
optimum adaptation to the
respective application.
NEW! WURTH.CA
Level
1
2
3
4
360°- rotatable air outlet on
the top of the pneumatic impact
wrench. The exhaust air can be
expelled in the desired direction.
54 Note: For better performance and longer
tool life, we recommend the daily use of
Würth Pneumatic Tool Oil (1L), Art. No.
893.0505.
2017
Tightening torque in Nm,
approx.
895
1,287
1,355
1,694
WHEEL NUT LOOSENER - CARGO NUT BUSTER
Art. No. 714.15000
•
•
•
•
•
Bust Loose the most stubborn wheel nuts
Use on Commercial or Agricultural Wheels
Gear Ratio – 58:1
Rated Output Torque –2950 ft lbs
Two Sockets Included 1 1/2”(38mm) & 1
5/16”(33mm)
• 1" drive
Socket Replacement Sold Separately
Size (in)
Size (mm)
Drive
1 5/16"
33 mm
1"
1 1/2"
38 mm
Art. No.
714.15033
714.15038
Contents
Handle
Motor
Blow Molded Case
Sockets
1.1 Connection Rod
Main Body
Instructions
1 1/2”(38mm)
Fix suitable socket onto front
square tenon of main body
1 5/16”(33mm)
Fix socket onto the nut/bolt and loosen the
nut/bolt one or two rotations
JULY
Change socket and handle over to 1:1
Connecting Rod to completely remove the
nut/ bolt
GENERAL TOOLS 55
WHEEL NUT LOOSENER - AUTO NUT BUSTER
•
•
•
•
•
•
Art. No. 714.15001
Bust Loose the most stubborn wheel nuts
Use on passenger and light-duty truck wheels
Gear Ratio – 18:1
Rated Output Torque –855’ lbs
Three Sockets Included 11/16” (17mm), 3/4” (19mm) and 13/16” (21mm)
1/2” drive
Size (in)
11/16”
3/4”
13/16”
Size (mm)
17 mm
19 mm
21 mm
Drive
1/2"
Contents
Handle
Motor
Blow Molded Case
Sockets
1.1 Connection Rod
GREASE JOINT CLEANING TOOL
Main Body
Art. No. 986.014
Frees up the grease joints and fittings, enabling them to be
greased again.
The Grease Joint Cleaning Tool allows a clogged grease fitting or joint to take on
fresh grease by injecting light penetrating oil into the grease joint via the grease
fitting, breaking up and removing any dirt, rust or debris.
Easy to use: First remove the piston from the tool body and fill it with a
non-aerosol penetrating oil, such as the Würth Pneumatic Tool Oil (Art. No.
893.0505). Once the tool body has been filled, reinsert the piston, gently working
it into the bore of the body. Be sure to clean the piston and O-ring before inserting.
When the piston is inserted into the tool body, air may get trapped inside. Any air
left in the tool reduces the hydraulic pressure, causing the tool to be less effective.
After filling the tool body with light, penetrating oil, put the piston back and turn
the tool upside down to allow the air bubble to float to the top. Place a rag over
the end of the tool and tap on the piston lightly with your hand until the air bubble
is forced out. When bleeding, be sure to keep your face and eyes away from
expelling air and fluid. If the piston bounces back when tapped, it has air in it.
Directions: Once the air has been bled from the tool, you are ready to unclog a
stuck fitting or joint. Push the grease coupler over the grease fitting and lightly tap
the piston head with a small hammer. It may take several taps, but the piston will
eventually move down into the tool body. This indicates that the joint is opening.
Once the piston has pushed all the oil out, remove the tool and grease the joint.
Comes with a flexible extension for hard to reach areas: Some
applications may require the use of the Flexible Extension to make a bend. To
install the flex hose, remove the female grease coupler from the tool. Using sealant
tape, install the flex hose into the tool body, then install the grease coupler on the
end of the hose. This gives you flexibility when trying to access tight places.
56 NEW! WURTH.CA
2017
HAND LEVER GREASE GUN
Art. No. 986.00
•
•
•
•
•
For 500 cm³ bulk grease, 400 g cartridges, (235 x Ø 53.5 mm).
Feed volume adjustable up to 1.5 cm³.
Operating pressure 400 bar/5 800 psi.
Max. pressure up to above 800 bar/11 600 psi.
Actuating force 50 to 330 N at feed pressures of 50 to 400 bar (725 to 5
800 psi).
P. Qty: 1
Additional tools:
Heavy Duty Grease Gun End 4-Prong M10 X 1 Art. No. 986.003
Grease Gun End 1/8 NPT Art. No. 715.15688
1. Precision steel pump, no “false
lubrication”, no seals to wear out.
2. Short stroke feed system, grease
feed possible at any opening angle,
two inlet openings, good grease
flow even at low temperatures.
3. Filling and air bleeding valve.
Filling possible with cartridges or
bulk grease with filling device.
4. Metering gauge for
controlled grease output.
5. Grease and oil resistant
special seal piston.
PNEUMATIC GREASE GUN SET
6. Sturdy precision tube.
7. Ergonomically designed
safety handle.
8. No-slip knurling in the grip area.
9. Close piston rod handle.
10. Fixing system—indefinitely
adjustable, slip-proof piston rod
fixing—no inadvertent operation!
The design corresponds to DIN
1283 (M10 x 1) and has been
certified by TUV/GS, BLT and DLG.
Art. No. 986.100
1.
Air & manual grease gun set.
2.
P. Qty: 1
1. Pneumatic top coupling (for pneumatic application)
2. Grease gun (body)
3. Handle (for manual usage)
4. Rigid extension
5. Flexible extension
3.
Recommended:
Multi Purpose II Grease Art. No. 893.8711
4.
Multi Purpose III Grease Art. No. 893.107002
5.
Low Temperature Lithium Grease Art. No. 890.602
Premium Molybdenum Grease Art. No. 890.603
Technical data
Working pressure
Air consumption
Hose diameter
Inlet air pressure
90psi
113 L/min
9mm (3/8")
87psi (6 bars)
JULY
GENERAL TOOLS 57
GREASE GUN HOSE
• Manufactured from 3/16” I.D. S.A.E. 100R1
rubber hose
• The one braid hose is permanently crimped with
1/8 brass male pipe couplings on both ends
• To be used with hand held grease guns
Length (in)
12
18
Working Pressure (PSI)
3,000
3,000
Burst Pressure (PSI)
12,000
12,000
Art. No.
715.16279
715.16280
AIR REGULATOR WITH GAUGE
Art. No. 703.777
•
•
•
•
•
•
•
0-160 psi pressure gauge.
Infinite adjusting range.
1/4” NPT male and female fittings.
Provides precise air control for spray guns and air tools.
Swivel top allows for easy installation.
Compatible with any spray gun or air tool.
Air regulators greatly improve energy conservation, air actuator control,
controlling force/torque and operator safety.
Applications:
Use with Würth Sprayable Seam Sealer Gun Art. No. 891.628, all Würth air
tools, etc.
P. Qty: 1
PISTOL VAC
Art. No. 714.92
Pistol Vac With Bag & Crevice Tool. Designed for high powered
industrial vacuum cleaning with air pressure. Turns any shop air
into a powerful vacuum cleaner or air cleaning gun.
•
•
•
•
•
•
•
Note: Operate in vacuum mode only with factory dust bag securely attached by
hose clamp. Operate with regulated air at a maximum of 90 psi and with 3/8“ air
supply line. Operate only with Safety Glasses, see Prefix 899. OSI-1A regulations
require a maximum of 30 psi when operating in the Pistol Vac in blow mode.
58 NEW! WURTH.CA
Connects to your air line.
Out performs inexpensive imports.
Dust bag and crevice tool included.
No electrical connections needed.
Fits many PBE applications.
Easy and convenient to use.
Maintenance free.
Applications:
Glass, sawdust, metal chips, dust spills, liquid.
P. Qty: 1
2017
24" AIR COMB - BLOW GUN FOR RADIATORS AND FILTERS
Art. No. 714.9024
Special multi-port nozzle maximizes air pressure and volume at a
90° angle. Thoroughly cleans air filters, condensers, and radiators
from the inside out.
Safe on all filters - won't punch holes
Features:
• Focused high-pressure output
• 5x the air volume
• Long reach 90° airflow
• Accesses hard to reach areas
• Great for all air filters, radiators, and condensors
• Extends filter life
Industries:
• Agriculture
• Construction
• Automotive
• Industrial
• Stationary Power
JULY
GENERAL TOOLS 59
BLOW GUN WITH 1/4" NPT TIP
Art. No. 714.92202
A high quality blow gun is an essential tool for any shop
Features:
• High quality industrial strength plastic
• Ergonomically constructed and insulated
• Can also be used with non-explosive fluids
Technical data
Weight
2.7 oz (76g)
Sound Level
96 dB
Flow Capacity
500 l/min (17.7 CFM)
Max. Working Pressure
16 bar (230 PSI)
Benefits:
• Constructed design reduces user fatigue
• Robust, yet light weight
BLOW GUN KIT
Art. No. 714.921101
This kit contains our high quality blow gun, rubber tipped nozzle,
effect enhancer with bypass, and a plastic guard.
Note: Plastic Guard with bypass Art. No. 714.9223, Rubber Tipped
Nozzle Art. No. 714.9224, and Effect Enhancer with bypass Art.
No. 714.9225 will be made available separately in late 2015.
Attachment Pieces
A (mm)
C (mm)
Weight (grams)
Art. No.
Description Plastic Guard with bypass
36.5
100
32
714.9223
Fits directly on the tube. The 4 inch diameter guard is made of high quality transparent
plastic to allow the work surface to be clearly visible. The shield can be moved up or down
along the shaft to protect the operator from flying debris when clearing the surface. The
nitrile bushing secures the guard for easy installation and removal.
Rubber Tipped Nozzle
46.5
14
9
714.9224
Fits directly on the tube. This nozzle is used for sensitive surfaces and also used through
pressurization to look for leaks by creating a tight seal.
Effect Enhancer with bypass
54.0
14
11
714.9225
Fits directly on the tube. This accessory draws in ambient air from the side of the nozzle and
amplifies the air flow. When the end of the nozzle is blocked, it diverts the air out through
the side and reduces pressure down to 2 bar (29 psi).
60 NEW! WURTH.CA
2017
PNEUMATIC RIVET GUN
Features:
• Powerful, durable, high-speed production tool.
• Quick release air valve permits cylinder to return quickly for high speed
assembly operations: Prevents overloading for long life.
• Performs well at any angle.
• Gets into hard-to-reach areas.
• Provides quick, quiet and comfortable operation preventing user fatigue.
Technical data
Rivet capacity
Nose pieces
Overall length
Net weight
Motor
Air Inlet Thread NPT
Air Hose I.D. size
Avg. air consumpt.
Air pressure
Description
Pneumatic Rivet Gun
3/16” Rivet Gun
max. 3/16"
3/16“, 5/32“, 1/8“, 3/32“
10-5/8“/270 mm
3-1/4 lbs/1.5 kg
1/2 hp
1/4“
3/8“/10 mm
2 cfm
71-85 psi
Size
3/16”
1/4”
1/4” Rivet Gun
max. 1/4”
1/4”, 3/16“, 5/32“, 1/8“, 3/32“
10-7/8“/280 mm
3-1/2 lbs/1.6 kg
2.320 Litre/stroke
90-120 psi
Art. No.
703.900
703.93721
P. Qty
1
PNEUMATIC TOOL OIL
Art. No. 893.0505 - 1 L
Lubricate, clean and protect your pneumatic tools.
•
•
•
•
•
ELECTRIC GLUE GUN
Increases power and tool performance.
Extends tool operating life.
Minimizes corrosion by repelling air line moisture.
Removes dirt, dust and gummy deposits.
Compatible with all piston and rotary type air tools.
Art. No. 702.100057
•
•
•
•
•
Industrial high temperature glue gun delivers 2.5 pounds of glue per hour.
80 watts of heating power, 120 Volts.
Reaches 193°C (380°F).
Solid state PTC (positive temperature control) heaters.
Complete with stand and side stand which allows the gun to be placed on its
side without glue backflow.
• Double insulated ground cord.
• Glue stick diameter: 7/16” (11.3 mm).
P. Qty: 1
Recommended:
Glue Sticks 0.5 kg special glue, Ø 12 mm. Art. No. 890.100057
P. Qty: 25
Glue Sticks for Dent Lift System Ø 11.5 mm, 195 mm long.
Art. No. 890.100050
P. Qty: 10
JULY
GENERAL TOOLS 61
ULTRA HOT HEAT GUN
Art. No. 702.2000
Dual temperature heat gun for general use.
•
•
•
•
Choice of two temperature settings: 315 °C (600 °F) and 482 °C (900 °F).
1300 watt output.
UL and C-UL listed for safety.
Lightweight, easy to use, offers quick heat-up and ultra quiet operation.
P. Qty: 1
Chemical Application:
• Applying shrink tubing and shrink
fittings.
• Softening, forming and bending
plastic tubing.
• Speeding up plastic curing.
• Speeding setting of epoxy cement
repairs.
• Drying of damp areas before
painting.
• Drying out wet surfaces, motor
controls.
• Softening adhesives for tile removal.
• Softening and bending plastic tubing
and pipe.
• Strips paint fast.
Application Automotive Industry:
• Applying and removing decals.
• Curing epoxies.
• Drying distributor caps and wet ignitions.
• Drying paint touch-ups eliminating “haze”.
• Forming and welding plastics.
• Loosening rusted bolts and fittings.
• Removing wrinkles from vinyl seats.
• Repairing rear window defrosters.
• Setting thermoplastic adhesive.
• Shrinking headliners.
• Shrinking tubing.
• Softening and fitting convertible tops.
• Softening windshield seal for replacement.
• Thawing frozen radiators, gas lines, door locks.
Electrical Application:
• Bending and forming PVC conduit.
• Melting solder or component board
backs.
Woodworking Application:
• Bonding vinyls and other plastics
together.
Marine Application:
• Drying varnish and other finishes.
• Heating, softening, bending,
forming or molding plastic.
Heat Gun Users Include:
Appliance repairmen, biochemists, boat refinishers, building maintainers,
cabinetmakers, car rental agencies, carpenters, chemists, crime laboratories,
dental technicians, dry cleaners, dry wall contractors, electric motor repairman,
electricians, engineers, food retailers, foundrymen, furniture repairers,
homebuilders, janitors, locksmiths, machinists, marine owners, metal workers,
millwrights, opticians, photographers, physicians, plumbers, printers, roofers, tuneup specialists, welders.
Plastic Industry Application:
• Repairing ABS plastics.
• Returning “memory” plastic to
original shape.
WATER LEVELS
Light-weight, aluminum water level.
Description
Water level
VERNIER GAUGE
Vernier value
lower
upper
0.05
1/128
62 NEW! WURTH.CA
•
•
•
•
•
•
Meas. range mm
Length of
Jaw mm
Art. No.
0 - 150
40
715.7602
2017
Size
20" (500mm)
40" (1000mm)
With locking screw.
Thread table on rear side.
Stainless steel.
Graduation chrome plated.
Measuring surfaces ground and lapped.
Complete with carrying case.
Art. No.
714.6440
714.6441
P. Qty
1
INFRARED LASER THERMOMETER
Art. No. 715.53110
An integrated laser pointer for measurement of surface
temperatures
Technical Data
Measuring range
Two-point laser targeting system
Power supply
Spectral range
Reaction time of device
Repeat precision
Measuring tolerance
Automatic switch-off
Features:
• Ergonomic, practical and suitable for use anywhere
• Thanks to the two-point laser beam, the measuring point can be focused even
more precisely
• Extremely slim measuring cone of 12:1
• Digital setting of degree of emission
• Can be switched from Celsius to Fahrenheit
• With integrated display lighting
• Display of results with one decimal place
• Adjustable alarm with extremely high or lower temperatures
• Infrared laser thermometer is supplied in practical pouch which can be
fastened to belt
-50°C to +650°C
12:1
9 V battery (Art. No. 827.05) not included
8 to 14 µm
150 ms
– 50 to + 20 °C/– 58 to + 68 °F:
± 1.3 °C (2.3 °F)
+ 20 to + 650 °C/+ 68 to + 1,202 °F:
± 0.5 %, 0.5 °C (0.9 °F)
– 50 to + 20 °C/– 58 to + 68 °F:
± 2.5 °C (4.5 °F)
+ 20 to +300 °C/+ 68 to + 572 °F: ±
1 %, 1 °C (1.8 °F)
+ 300 to + 650 °C/+ 572 to
+ 1,202 °F: ± 1,5%
after approx. 5 sec.
Benefits:
• Temperatures displayed in just seconds
• Reliable and accurate measurements with a slimmer measuring cone
• Measures temperatures between -50°C and +650°C
Directions:
Point the measuring device at the object to be measured. Press the trigger. The
measurements collected by the laser point are indicated on the display. Automatic
shut-off occurs after 5 seconds
Note: When the trigger is pressed continually, the device always
indicates the actual temperature of each measuring point. When
released, the last measuring result is displayed.
MEASURING TAPE
High-quality metric and standard tape measures with plastic
housing, for easy measuring.
Features:
• High quality plastic housing
• Shock absorber for a cushioned rewinding of the tape
• Automatic lock when pulling out the blade
• Extremely stable thanks to the curved tape
• Tape can be extended far before it folds up
• Yellow nylon coated steel tape
• Metric and standard
• Belt clip
• Conforms to EU accuracy Class II
Description
Measuring Tape
Size
5 M (16 ft)
8 M (26 ft)
Art. No.
714.64575
714.64578
Benefits:
• Low weight
• End hook for stop and tension measurement
• Not subject to corrosion
• Long service life
P. Qty
1
JULY
GENERAL TOOLS 63
DIGITAL VERNIER CALIPER
Art. No. 715.7611
Measuring Range
mm
0 - 150
• Accuracy:
0.02 mm/0.001 in (0-100 mm); 0.03 mm/0.001 in (>100-200 mm)
• Repeatability: 0.01 mm/0.005 in.
• Maximum measuring speed: 1.5 m/sec 60 in/sec.
• Measuring system: linear capacity measuring system.
• Base measuring function: inside, outside, depth, step measuring.
• Display: LCD display.
• Power: one battery 1.55V silver oxide SR44 (or alkaledscence battery)
capacity: 180 mAh.
• Operating temperature: 0-40 °C/41-104 °F.
• Influence of humidity: within 0-80 % of relative humidity.
• Storage temperature: -20 °C - +70 °C.
in
0-6
Directions:
Keep body surface clean, prevent liquid material from getting into slider to damage
electronics. Surface should be cleared by petrol and the body may be lubricated
by a little clock oil. Acetone and alcohol should not be used. Don’t remove the data
interface lid when the interface is not used.
Do not insert any conductive body into the interface to protect the electronics.
P. Qty: 1
Recommended tools:
Replacement battery Art. No. 827.0813
PUMP SPRAY BOTTLE 360°
Art. No. 891.503360 1L
Special intake system allows 360° spraying and ensures reliable
working overhead, at an angle or vertically.
Features:
• Easier to open, thanks to non-slip grip
• Ergonomic, robust pump spray atomizer with long handle
• Individually markable label
• Space for labeling the type of liquid filling
• Extra fields for safety instructions
360° use
Benefits:
• Fatigue-free working thanks to low operating force
• Strong spray stream
• Good stability thanks to conical shape
• Easy filling from canisters or drums
Markable Label
Note: See chemical compatibility chart before use
The information on use is only a recommendation based on our own tests and experience. Carry
out your own tests before each use. Due to the large number of possible applications and storage/
usage conditions, we make no guarantee as to any specific results of use. Insofar as our free customer
service provides technical information or advice, we shall not be held liable in any way unless
the advice or information is part of the contractual scope of our services which must be provided
or if the person giving the information is acting deliberately. We guarantee the consistent quality
of our products and reserve the right to make technical changes and continue development.
64 NEW! WURTH.CA
2017
PUMP SPRAY O-RING KIT
Art. No. 891.599
All parts necessary to rebuild 1 Litre pump spray bottles
P.Qty: 1
EMPTY BOTTLE WITH SPRAYER
Art. No. 891.502002 (500mL)
For user-friendly application of liquids
Features and Benefits:
• Transparent, break-proof container with fill level visibility
• 100mL and 200mL scales, useful aid for filling and mixing
• Individual markable label for labelling liquid contents, plus extra fields for
safety instructions
P.Qty: 1
Note: Replaces 1/2 Litre Bottle Art. No. 890.700 & Sprayer Art. No.
890.8
ECO DISPENSING PUMP FOR 4L AND 20L CONTAINERS
Art. No. 891.901120
Contains:
• One 17" (43cm) dispensing pump, and one
yellow 20L pail adaptor
Benefits:
• Fits all 4L and 20L ECO containers
• Spring-loaded for easy operations
• Made of high-density polyethylene
JULY
GENERAL TOOLS 65
Download PDF
Similar pages