RACKS AND CABLE MANAGEMENT
E Series Hortizontal Wire Managers . . . . . . . . . . . .114
Horizontal Wire Management . . . . . . . . . . . . .115-116
Vertical Wire Management . . . . . . . . . . . . . . .117-119
Racks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120-122
Shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123-125
Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
Network Cabling Solutions
Racks and Cable Management Products
E Series Horizontal Wire Managers
HellermannTyton’s enhanced horizontal wire managers protect
cable and maintain its integrity on a standard 19² rack. The high
quality, injection molded wire managers possess a one-inch
minimum radius, which guards against extensive bending of the
cables and increases transmission reliability. Using the enhanced
horizontal wire managers makes installing and rework faster and
easier. Snap-on, injection-molded covers hinge down for easy
access to patch cords in front of the rack during moves, adds, and
changes (MAC’s). HellermannTyton's enhanced horizontal wire
manager’s aesthetic design includes a clean look with textured
covers, preventing fingerprints.
• The smooth edges and the wide spacing allow for easy
routing of cable bundles.
• Mounting holes and slots on the sides of the
management system permit easier alignment on the
rack and faster installation.
• The sloped design in the rear maintains room for cable bundles
and ensures easy access to patch panels.
• The horizontal rear cable manager's depth is increased, enabling
cables to be routed more easily from vertical managers.
• Wire retention tabs are designed into the enhanced horizontal
wire managers to help keep cables inside the manager.
• The wire manager's material is UL94V-0 rated for flammability.
• New latch makes for easier opening.
Product Selection
Front Dimensions
Article No.
Part No.
Type
Description
Width
Depth
Rear Dimensions
Width
Depth
Rack
Units
Pkg.
Qty.
Shipping
Weight
One Rack Unit Managers
854-09268 EHWMN1
EHWM Single-Sided Horizontal Wire Manager
1.75²
3²
-
-
1U
1
1 lbs.
854-09269 EHWMN2
EHWM
1.75²
3²
1.75”
6²
1U
1
2 lbs.
Dual-Sided Horizontal Wire Manager
Two Rack Unit Managers
854-09270 EHWM1
EHWM Single-Sided Horizontal Wire Manager
3.5²
3²
-
-
2U
1
1.75 lbs.
854-09271 EHWM2
EHWM
3.5²
3²
3.5”
6²
2U
1
2.16 lbs.
Dual-Sided Horizontal Wire Manager
Use Part No. for ordering and Type for specification purposes.
114
For product information visit www.hellermann.tyton.com or call 800.537.1512
Network Cabling Solutions
Racks and Cable Management Products
Wire Management Brackets
HellermannTyton provides the most adaptable and systematic approach for cable
management on relay racks. Offering a complete line of versatile products, these
brackets and panels protect, route, and organize UTP, ScTP, coax and fiber optic
cables and make it easy to perform moves or changes. For a completely
enclosed appearance, HellermannTyton offers the horizontal and vertical wire
management brackets. This design provides organization while keeping cables
hidden. The covers are easily removed and reattached providing quick and easy
access to both the front and back of a rack. To prevent misplacement of covers,
the brackets are also available with a hinged cover allowing easy open and close
without entire cover removal. Ideal for high density installations, the black wire
management brackets feature smooth-edged slotted fingers allowing cable to
be pulled through at any location. The slotted fingers are scored, enabling them
to break off if larger openings are required. Numerous sizes are available in both
horizontal and vertical configurations. All wire management brackets are
packaged with 12-24 mounting screws.
Wire management brackets can be customized with corporate logos. Contact
HellermannTyton for more information.
Horizonal Wire Management Brackets
Designed to provide cable management horizontally on the front and
back of a rack, the black WMB series include several variations and
sizes. The single-sided bracket provides a channel for only the front or
the back on a relay rack and the dual-sided bracket provides a channel
for both the front and back on a relay rack. The two styles are offered
for one, two, and three rack spaces. The two rack space wire manager
has pass through holes in the frame for better management of cables
and front to back cabling. All are equipped with extended length
covers to keep excess cable hidden.
HellermannTyton's wire managers also feature an easily removable
plastic film on the cover to eliminate scratches during shipment. This
plastic film ensures a neat appearance and improves rack aesthetics
when the wire managers are installed, an important consideration to
installers and end-users.
Wire Management Bracket Hinges
All designs of wire management brackets perform with the wire
management bracket hinge. This hinge allows the cover to remain with
the bracket. It easily snaps onto the cover and the channel. Once
assembled, the hinge permits the cover to be opened down and act as a
“shelf” for easy cable organization. The hinge is available separately or
preassembled on the wire management bracket and cover.
Plastic film to protect cover provided
For product information visit www.hellermann.tyton.com or call 800.537.1512
115
Network Cabling Solutions
Racks and Cable Management Products
Horizontal Wire Management
Product Selection
Front Dimensions
Rear Dimensions
Type
Description
Width
Depth
Width
Depth
Rack
Units
Pkg.
Qty.
Shipping
Weight
854-09253 WMBN1
WMBN1
Single-Sided Horizontal Wire
Manager
1.5²
2²
-
-
1U
1
1.0 lbs.
854-09256 WMBP1
WMBP1
Single-Sided Horizontal Wire
Manager
1.5²
3²
-
-
1U
1
2.0 lbs.
854-09254 WMBN2
WMBN2
Dual-Sided Horizontal Wire
Manager
1.5²
2²
1.5²
4²
1U
1
1.75 lbs.
854-09258 WMBP2
WMBP2
Dual-Sided Horizontal Wire
Manager
1.5²
3²
1.5²
4²
1U
1
2.16 lbs.
WMB1
Single-Sided Horizontal Wire
Manager
3²
3²
-
-
2U
1
1.75 lbs.
WMB1H*
Single-Sided Horizontal Wire
Manager with Hinged Cover
3²
3²
-
-
2U
1
1.75 lbs.
WMB2
Dual-Sided Horizontal Wire
Manager
3²
3²
2²
4²
2U
1
2.75 lbs.
854-09240 WMB2H
WMB2H*
Dual-Sided Horizontal Wire
Manager with Hinged Cover
3²
3²
2²
4²
2U
1
2.75 lbs.
854-09237 WMB2B
WMB2B
Dual-Sided Horizontal Wire
Manager
3²
3²
3²
5²
2U
1
3 lbs.
Dual-Sided Horizontal Wire
Manager with Hinged Cover
3²
3²
3²
5²
2U
1
3 lbs.
Single-Sided Horizontal Wire
Manager
4²
5²
-
-
3U
1
2 lbs.
Single-Sided Horizontal Wire
Manager with Hinged Cover
4²
5²
-
-
3U
1
2 lbs.
Dual-Sided Horizontal Wire
Manager
4²
5²
4²
5²
3U
1
4 lbs.
Dual-Sided Horizontal Wire
Manager with Hinged Cover
4²
5²
4²
5²
3U
1
4 lbs.
Article No.
Part No.
One Rack Unit Managers
Two Rack Unit Managers
854-09232 WMB1
854-09233 WMB1H
854-09236 WMB2
854-09238 WMB2BH WMB2BH*
Three Rack Unit Managers
854-09243 WMB31
WMB31
854-09244 WMB31H WMB31H*
854-09245 WMB32
WMB32
854-09246 WMB32H WMB32H*
Use Part No. for ordering and Type for specification purposes. Wire managers with hinged covers ship with two hinges. *Not pictured.
Replacement/extra covers and hinges are listed after the vertical wire management brackets.
WMBN1
WMBP1
WMB1H
116
WMB2
WMBN2
WMB2B
WMBP2
WMB31
WMB32
For product information visit www.hellermann.tyton.com or call 800.537.1512
Network Cabling Solutions
Racks and Cable Management Products
Vertical Wire Management
The vertical wire managers are also available in single and dualsided styles. They can be mounted on the side of the relay rack as
well as between two adjacent racks. Equipped with feed-through
holes to move cable from back to front and vice versa, the black
vertical wire management brackets are offered in 35² lengths and
83² lengths. The VWMC4X4X5BK7 and VWMS4X4X5BK7 have
4² x 5² duct on the front and 4² x 4² duct on the back.
In case of lost covers, HellermannTyton offers replacement covers
for the vertical wire management brackets. HellermannTyton's
wire managers also feature an easily removable plastic film on the
cover to eliminate scratches during shipment. This plastic film
ensures a neat appearance and improves rack aesthetics when the
wire managers are installed, an important consideration to
installers and end-users.
Plastic film to protect cover provided
Wire Management Hinges
HellermannTyton also offers replacement/extra hinges for the wire management brackets. All designs of wire
management brackets perform with the wire management bracket hinge. This hinge allows the cover to remain with
the manager. It easily snaps onto the cover and the channel. Once assembled, the hinge permits the cover to open
like a door, protecting the wire and cable.
Wire Management Bracket Hinges
For product information visit www.hellermann.tyton.com or call 800.537.1512
117
Network Cabling Solutions
Racks and Cable Management Products
Vertical Wire Management
Product Selection
Front Dimensions Rear Dimensions
Article No.
Part No.
Type
Pkg.
Height Qty.
Shipping
Weight
(lbs)
Description
Width
Depth
Width
Depth
VWMDS4X5
Dual-Sided, Side Mount
Wire Manager
4²
5²
4²
5²
35²
1
7
854-09220 VWMDS4X5BKH*
VWMDS4X5H
Dual-Sided, Side Mount
Wire Manage with Hinged Covers
4²
5²
4²
5²
35²
1
7
854-09217 VWMDS4X5BK7
VWMDS4X57
Dual-Sided, Side Mount
Wire Manager
4²
5²
4²
5²
83²
1
16
854-09218 VWMDS4X5BK7H*
VWMDS4X57H
Dual-Sided, Side Mount
Wire Manage with Hinged Covers
4²
5²
4²
5²
83²
1
16
854-09224 VWMS4X4X5BK7
VWMS4X4X57
Dual-Sided, Side Mount
Wire Manager
4²
5²
4²
4²
83²
1
16
VWMSS4X5
Single-Sided, Side Mount
Wire Manager
4²
5²
-
-
35²
1
3.5
854-09230 VWMSS4X5BKH*
VWMDS4X5H
Single-Sided, Side Mount Wire
Manager with Hinged Covers
4²
5²
-
-
35²
1
3.5
854-09228 VWMSS4X5BK7
VWMDS4X57
Single-Sided, Side Mount Wire
Manager with Hinged Covers
4²
5²
-
-
83”
1
9
854-09229 VWMSS4X5BK7H*
VWMSS4X57H
Single-Sided, Side Mount Wire
Manager with Hinged Covers
4²
5²
-
-
83²
1
9
Side Mount - Dual-sided, Front and Back Management
854-09216 VWMDS4X5BK
Side Mount - Single-sided, Front Only Management
854-09227 VWMSS4X5BK
Use Part No. for ordering and Type for specification purposes. *No drawing pictured
VWMDS4X5BK
118
VWMDS4X5BK7
VWMS4X4X5BK7
VWMSS4X5BK
VWMSS4X5BK7
For product information visit www.hellermann.tyton.com or call 800.537.1512
Network Cabling Solutions
Racks and Cable Management Products
Vertical Wire Management
Product Selection
Front Dimensions
Article No.
Part No.
Type
Rear Dimensions
Description
Width
Depth
Width
Depth
Height
Pkg.
Qty.
Shipping
Weight
(lbs)
Center Mount - Dual-sided, Front and Back Management
854-09212 VWMDC4X5BK
VWMDC4X5
Dual-Sided, Center Mount
Wire Manager
4²
5²
4²
5²
35²
1
7
854-09213 VWMDC4X5BK7
VWMDC4X57
Dual-Sided, Center Mount
Wire Manager
4²
5²
4²
5²
83²
1
16
854-09211 VWMC4X4X5BK7
VWMC4X4X57
Dual-Sided, Center Mount
Wire Manager
4²
5²
4²
4²
83²
1
16
Center Mount - Single-sided, Front Only Management
854-09225 VWMSC4X5BK
VWMSC4X5
Single-Sided, Center Mount
Wire Manager
4²
5²
4²
5²
35²
1
3.5
854-09226 VWMSC4X5BK7
VWMSC4X57
Single-Sided, Center Mount
Wire Manager
4²
5²
4²
5²
83²
1
9
Use Part No. for ordering and Type for specification purposes.
VWMDC4X5BK
VWMDC4X5BK7
VWMC4X4X5BK7
VWMSC4X5BK
VWMSC4X5BK7
Wire Management Replacement Covers
Product Selection
Article No.
Part No.
Type
Description
Pkg. Qty.
Carton Qty.
Horizontal Manager Covers
854-09247
WMBC15B
WMBC15B
Replacement Rear Cover for WMBN2 and WMBP2
1
10
854-09248
WMBC15F
WMBC15F
Replacement Front Cover for WMBN1 and WMBN2
1
10
854-09249
WMBC2B
WMBC2B
Replacement Rear Cover for WMB2
1
10
854-09250
WMBC2F
WMBC2F
Replacement front cover for WMB1, WMB2 & WMB2B
1
10
854-09251
WMBC3B
WMBC3B
Replacement Rear Cover for WMB2B
1
10
854-09252
WMBC4B
WMBC4B
Replacement Rear Cover for WMB32
1
10
Vertical Manager Covers
854-09209
VWMC18
VWMC18
Replacement Cover for 35² Managers
1
–
854-09210
VWMC42
VWMC42
Replacement Cover for 83² Managers
1
–
WMBH
Wire Management Hinges
25
-
Hinges
854-09272
WMBH
Use Part No. for ordering and Type for specification purposes.
For product information visit www.hellermann.tyton.com or call 800.537.1512
119
Network Cabling Solutions
Racks and Cable Management Products
Relay Racks
HellermannTyton’s modular relay racks are ideal for mounting patch panels, shelves,
electronic and test equipment, data and telecommunications equipment and other rack
mount products in telecommunications and equipment rooms.
The free-standing racks are manufactured from heavy duty all-aluminum extrusions and
are designed to bolt to the floor for extra stability. Assembly is easily accomplished using a
standard socket or adjustable wrench and the supplied bolts.
•
•
•
•
•
•
•
•
•
Standard 19² EIA rack mount widths
Equipped with 12-24 tapped holes on front and rear flanges
EIA universal hole spacing for a variety of mounting options
Available in aluminum mill and black powder coat finish
Available in 47² and 84² heights
Pre-threaded holes in upright channels allow for easy assembly of top angles and bases
Only 12 bolts required for assembly
Approved per UL standard 1459 for telephone equipment
Approved per UL standard 1863 for communications circuit accessories
Product Selection
Type
Color
Height
Width
Rack Units
Pkg. Qty.
Shipping Weight
854-44290 T4RR
Article No.
Part No.
T4RR
Mill Finish
47.25²
19²
24U
1
28 lbs.
854-44291 T4RRB
T4RR
Black
47.25²
19²
24U
1
28 lbs.
854-44295 T7RR
T7RR
Mill Finish
84²
19²
45U
1
31 lbs.
854-44297 T7RRB
T7RR
Black
84²
19²
45U
1
31 lbs.
Use Part No. for ordering and Type for specification purposes.
3.00
.625
.625
.500
Holes Tapped
12-24
120
For product information visit www.hellermann.tyton.com or call 800.537.1512
Network Cabling Solutions
Racks and Cable Management Products
Raised Floor Enclosure
HellermannTyton’s Raised Floor Enclosure serves as a distribution
point for zone cabling for low voltage cabling under raised floors
of 8” deep or more. This enclosure can be used with traditional
patch panel applications as well as copper and fiber RapidNet
solutions.
The enclosure is supported by the raised floor support brackets
and uses the 2’ x 2’ floor tile as a cover. Designed to store and
secure rack mount equipment, the enclosure is equipped with
firestop foam sealing kits to seal the two openings. Fire stop
blocks accommodate single or bundled cable.
Features
• Designed to fit into 2’ x 2’ raised floor grids, 8” depth
• Holds two 2RU (4RU) panels
• Inside mounting brackets for 19” EIA rack mounting
• Accepts #12-24 equipment mounting screws (included
with all HellermannTyton patch panels)
• Firestop foam kits/blocks to seal cable access ports
• Load capacity equals 85 pounds of equipment total
• Indoor use only, environmentally controlled areas
• Floor tile used for cover
• Seal provided on top flange to seal floor tile
Firestop block adds
protection to network
wiring
Includes
• 4 raised floor support brackets
• 4 leveler bolts
• 2 grounding screws to outside of box
Product Selection
Article No.
854-19200
Part No.
HTZB2X2
Type
Color
Depth
Width
Pkg. Qty.
Shipping Weight
HTZB
Mill Finish
7.94²
20.88²
1
30 lbs.
Use Part No. for ordering and Type for specification purposes.
For product information visit www.hellermann.tyton.com or call 800.537.1512
121
Network Cabling Solutions
Racks and Cable Management Products
Wall Mount Swing-out Rack
This wall mount rack swings equipment out for ease of wiring. It is equipped with quick-release hinges allowing the
rack to be opened from either the right or the left. The rack features standard 19² EIA rack mount widths, equipped
with 12-24 tapped holes on front and rear flanges.
Product Selection
Article No.
Part No.
854-44288 T24PPR
Type
Color
T24PPR Black
Height
Width
Depth
Rack Units
Pkg. Qty.
Shipping
Weight
24²
20.75²
18²
12U
1
35 lbs.
Use Part No. for ordering and Type for specification purposes.
122
For product information visit www.hellermann.tyton.com or call 800.537.1512
Network Cabling Solutions
Racks and Cable Management Products
Shelves
HellermannTyton offers two styles of solid and vented equipment shelves for mounting telecommunications devices in a 19²
rack or cabinet. The cantilevered shelf mounts to the front or rear of the rack’s mounting rails. Both the center weight and
the cantilevered shelf are manufactured from 16 gauge steel and they come with 10-32 and 12-24 mounting hardware. The
cantilevered shelf is rated for 50 pound capacity and the center weight is rated for 75 pound capacity.
Product Selection
Article No.
Description
Color
Height
Width
Depth
Pkg.
Qty.
T19X195CW
Solid Center Weight Equipment Shelf
Black
3.44²
19²
19²
1
9 lbs.
T19X195CWV
Vented Center Weight Equipment Shelf
Black
3.44²
19²
19²
1
8.3 lbs.
Part No.
854-44285
T19X195CW
854-44286
T19X195CWV
854-44283
T19X145
854-44284
T19X145V
Type
Shipping
Weight
T19X145
Solid Cantilevered Equipment Shelf
Black
3.44²
19²
14²
1
7 lbs.
T19X145V
Vented Cantilevered Equipment Shelf
Black
3.44²
19²
14²
1
6.1 lbs.
Use Part No. for ordering and Type for specification purposes.
T19X145
T19X195CW
T19X145V
T19X195CWV
For product information visit www.hellermann.tyton.com or call 800.537.1512
123
Network Cabling Solutions
Racks and Cable Management Products
Power Strips
Available in a 6 or 10 outlet format, these 19² powerstrips can be
mounted directly onto the relay rack. All powerstrips meet UL Standard
1363 and 1449. The 10 outlet powerstrip is equipped with or without
surge protection. The Powerstrip-10S has a surge suppression level of
330V with a clamping response time of less than 5 nanoseconds. All
powerstrips are equipped with a 10 foot power cord.
Product Selection
Type
Description
Color
Height
Width
854-44307 POWERSTRIP-6
Article No.
Part No.
POWERSTRIP-6
Rack Mount Powerstrip - 6 Outlet
Black
1.719²
19²
Pkg. Qty.
1
854-44305 POWERSTRIP-10
POWERSTRIP-10
Rack Mount Powerstrip - 10 Outlet
Black
1.719²
19²
1
854-44306 POWERSTRIP-10S
POWERSTRIP-10S Rack Mount Powerstrip - 10 Outlet w/ Surge Protection
Black
1.719²
19²
1
Use Part No. for ordering and Type for specification purposes.
Blank Rack Panels
HellermannTyton’s blank rack panels provide filler for unused rack spaces. Available in three sizes, they aesthetically reserve
rack space for future use.
Product Selection
Type
Color
Height
Width
Rack Units
Pkg. Qty.
854-44299
Article No.
TBP1
Part No.
TBP1
Black
1.75²
19²
1U
1
854-44300
TBP2
TBP2
Black
3.5²
19²
2U
1
854-44301
TBP3
TBP3
Black
5.25²
19²
3U
1
Use Part No. for ordering and Type for specification purposes.
124
For product information visit www.hellermann.tyton.com or call 800.537.1512
Network Cabling Solutions
Racks and Cable Management Products
Wall Mount Patch Panel Bracket
HellermannTyton offers wall mount patch panel brackets for
smaller cabling installations. The wall mount brackets aid in
conserving valuable floor space within the telecommunications
room.
Designed for 19² patch panels, these hinged brackets can be
mounted directly onto a wall. They are available with right or left
hand hinging, allowing complete access to the back of the patch
panel. The bracket holes utilize universal EIA spacing. They are
manufactured from heavy duty 16 gauge steel and finished with a
black polyurethane baked paint. HellermannTyton’s horizontal wire
management brackets may also be mounted onto the wall mount
brackets in order to organize excess cable.
Product Selection
Type
Color
Height
Depth
Rack Units
Pkg. Qty.
854-44287 T1PPB
Article No.
Part No.
T1PPB
Black
1.75²
6²
1U
1
854-44289 T3PPB
T3PPB
Black
3.5²
6²
2U
1
854-44406 T3PPB8
T3PPB8
Black
3.5²
8²
2U
1
854-44292 T5PPB
T5PPB
Black
5.25²
6²
3U
1
854-44293 T7PPB
T7PPB
Black
7²
6²
4U
1
854-44421 T7PPB8
T7PPB8
Black
7²
8²
4U
1
Use Part No. for ordering and Type for specification purposes.
For product information visit www.hellermann.tyton.com or call 800.537.1512
125
Network Cabling Solutions
Racks and Cable Management Products
Cable Management Panels
For a clean and simple solution to eliminating cable clutter on a relay rack, HellermannTyton offers a line of open cable
management panels. Equipped with metal or plastic hangers, these 19² panels provide fast and easy organization.
Product Selection
Article No.
Part No.
Type
Description
Color
854-09207 THCO1
THCO1
Horizontal Cable Organizer with
4 feed-through holes
Features and Benefits 3 Height in Units Pkg. Qty.
Black
Five Metal Rings
1U
1
854-09208 THCO2
THCO2
Horizontal Cable Organizer with
8 feed-through holes
Black
Five Metal Rings
2U
1
854-05135 THCM1 THCM1
Horizontal Cable Manager
Black
Five Plastic Rings
1U
1
854-05136 THCM2 THCM2
Horizontal Cable Manager
Black
Five Plastic Rings
2U
1
854-05138 TRCMA
TRCM
AlphaSnap Rear Cable Manager
Mill Finish
Grip Ties with Mounts
–
1
854-05139 TRCMU
TRCM
Universal Rear Cable Manager
Mill Finish
Grip Ties with Mounts
–
1
859-35057 TFCM
TFCM
Front Cable Manager
Black
Grip Ties and Metal Slots
–
1
Use Part No. for ordering and Type for specification purposes.
THCO1
THCM2
126
THCO2
TRCMA/U
THCM1
TFCM
For product information visit www.hellermann.tyton.com or call 800.537.1512
Download PDF
Similar pages