LED Fixture Battery Back-up
Order #: BB23468
Physical Characteristics
A
The LED battery back-up system is compatible with Venture Lighting's LED panel fixtures.
In the event of a power failure, the LED battery back-up system switches on
and will operate the fixture for 90 minutes. The LED battery back-up
system contains a self-contained Ni-Cd battery, charger, and converter circuit.
B
For use with switched and unswitched fixtures.
Each LED battery back-up stystem is provided with:
A self-contained Ni-Cd battery, charger, and converter circuit.
A test switch with charge indictor light accessory kit.
C
Dimensions
A: 2.6" (65mm)
B: 1.6" (40mm)
C: 11.0" (280mm)
The nickel-cadmium battery has a recharge time of 24 hrs. The battery back-up is rated
for an ambient operating temperature not to exceed 50°C.
Wieght: 2.65 lbs (1.2 kg)
The LED battery back-up system operates on 120-277V 60 Hz input. In the event of a power
failure, the LED battery back-up system will operate a fixture up to 8.4W max.
The rated output voltage is 3-60V with a 0.14A max current.
Wiring Diagram
The LED battey back-up is a cULus recognized component.
BLACK
UNSWITCHED HOT
WALL SWITCH
WHITE
COMMON
GROUND WIRE
(GREEN)
WHT/RED
WHITE
OUTPUT(+)
BLACK
OUTPUT(-)
BLUE
ORANGE
AC LED
DRIVER
LED DRIVER
EMERGENCY
WHT/BLUE
WHITE
WHITE
WHITE
WHITE
ITS
RED
RED
BLACK
BLACK
WHT/BLK
WHT/BLK
YELLOW
VLI-1300SS_BatteryBackup_v1-0117
LED LOAD(+)
LED LOAD(-)
CONVERTER
CONNECTOR
2451 Enterprise Parkway East
•
Twinsburg, Ohio 44087
•
Tel. 877-281-1233
•
Fax 877-294-2829
•
VentureLighting.com
Download PDF
Similar pages