IPS LED MONITOR (LED MONITOR*)

Owner's Manual
IPS LED MONITOR
(LED MONITOR*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
Please read this manual carefully before operating
your set and retain it for future reference.
IPS LED MONITOR MODEL
24BK750Y
27BK750Y
www.lg.com
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
2
ENGLISH
CONTENTS
LICENSE-----------------------------
3
ASSEMBLING AND PREPARING--
4
--Product Components----------------------------Supported Drivers and Software----------------Parts and buttons-------------------------------Moving and Lifting the Monitor-----------------Setting up the Monitor set -------------------Attaching the Stand Base
Mounting on a table
Using the cable holder
Adjusting the Stand Height
Adjusting the angle
Pivot Feature
Swivel stand
Detaching the Stand Body
Installing the wall mount plate
Installing to a wall
USING THE MONITOR SET-------
4
5
6
7
8
16
--Connecting to a PC---------------------------- 16
--Connecting to AV Devices--------------------- 18
--Connecting Peripherals------------------------ 18
CUSTOMIZING SETTINGS-------
20
TROUBLESHOOTING-------------
24
‌SPECIFICATIONS-----------------
25
--Preset Modes (Resolution)-------------------- 27
--Indicator---------------------------------------- 27
3
ENG
ENGLISH
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
The SuperSpeed USB Trident logo is a registered trademark of USB Implementers Forum, Inc.
The following content is only applied to the monitor which is sold in Europe market and which needs to
meet the ErP Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no
adjustment to display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
4
ASSEMBLING AND PREPARING
ENGLISH
ENG
Product Components
Please check whether all the components are included in the box before using the product. If there are
missing components, contact the retail store where you purchased the product. Note that the product and
components may look different from those shown here.
CD(Owner's Manual) /
Card
Power Cord
( Depending on the country )
USB Cable
( This cable is not included in all
countries. )
DVI-D Cable
( This cable is not included in all
countries. )
Audio Cable
( This cable is not
included in all countries. )
Stand Body
Stand Base
HDMI Cable
( This cable is not
included in all countries. )
DisplayPort Cable
( This cable is not
included in all countries. )
Cable Holder (x 2)
CAUTION
Always use genuine components to ensure safety and product performance.
yy
The product warranty will not cover damage or injury caused by the use of counterfeit components.
yy
It is recommend that use the supplied components.
yy
If you use generic cables not certified by LG, the screen may not display or there may be image noises.
yy
NOTE
Note that the components may look different from those shown here.
yy
Without prior notice, all information and specifications in this manual are subject to change to imyy
prove the performance of the product.
To purchase optional accessories, visit an electronics store or online shopping site or contact the
yy
retail store where you purchased the product.
5
Supported Drivers and Software
Drivers and Software
Installation Priority
24BK750Y
27BK750Y
Monitor Driver
Recommended
O
OnScreen Control
Recommended
O
Optional
O
Dual Controller
Required and Recommended: You can download and install the latest version from the enclosed CD
yy
or from the LGE website (www.lg.com) .
Optional: You can download and install the latest version from the LGE website (www.lg.com) .
yy
ENG
ENGLISH
Check the drivers and software supported by your product and refer to the manuals on the CD enclosed in
the product package.
6
Component and Button Description
ENGLISH
ENG
Power Indicator
yyLighting On :Turned on
yyLighting Off : Turned off
(Power Button)
Button
Input Connector
7
Moving and Lifting the Monitor
It is advisable to place the monitor in the
yy
original box or packing material before attempting to move it.
Before moving or lifting the monitor, disconyy
nect the power cord and all cables.
Hold the top and bottom of the monitor frame
yy
firmly. Do not hold the panel itself.
When holding the monitor, the screen should
yy
face away from you to prevent it being
scratched.
When moving the monitor, avoid any strong
yy
shock or vibrations to the product.
When moving the monitor, keep it upright,
yy
never turn the monitor on its side or tilt it
sideways.
CAUTION
As far as possible, avoid touching the moniyy
tor screen. This may result in damage to the
screen or some of the pixels used to create
images.
ENG
ENGLISH
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being
scratched or damaged and to ensure safe transportation regardless of its shape or size.
8
Setting up the Monitor set
ENGLISH
ENG
Attaching the Stand Base
1
3
CAUTION
To protect the screen from scratches, cover
yy
the surface with a soft cloth.
2
WARNING
To avoid injury to the fingers and foot when
yy
Assembly Stand Body and Base, should hold
Base when assembly stand body and base.
NOTE
Press the stand until the button reaches the top.
yy
9
CAUTION
NOTE
You can disassemble the stand in the reverse
yy
order of the assembly.
1 Lift and tilt the Monitor set into its upright
position on a table.
Leave a 100 mm (4 inches) space from the wall
for proper ventilation.
100 mm
100 mm
100 mm
100 mm
2 Connect the Power cord to the monitor, then
plug the power cord into the wall outlet.
3 Press the (Power) button on the front of the
monitor to turn on the monitor.
CAUTION
Unplug the power cord prior to moving or
yy
installing the monitor. There is risk of electric
shock.
ENG
ENGLISH
Illustrations in this document represent typical
yy
procedures, so they may look different from the
actual product.
Do not carry the monitor upside down by just
yy
holding the stand base. This may cause the
monitor to fall off the stand and could result in
personal injury.
When lifting or moving the monitor, do not touch
yy
the monitor screen. The force applied to the
monitor screen may cause damage to it.
Do not apply foreign substances (oils, lubricants,
yy
etc.) to the screw parts when assembling the
product. (Doing so may damage the product.)
Applying excessive force when tightening
yy
screws may cause damage to the monitor.
Damage caused in this way will not be covered
by the product warranty.
Mounting on a table
10
ENGLISH
ENG
Using the cable holder
Adjusting the Stand Height
Arrange the cables using the cable holder as
shown in the illustration.
1 Handle the monitor with both hands for safety.
Cable holder
2 The height can be adjusted up to 150.0 mm.
150.0 mm
Rotate Set(Pivot) and put connectors. It is easy to
put connectors and manage cables using cable
holder.
WARNING
Cautions When Connecting Power Cord
100-240 V ~
Make sure to use the power cord that is proyy
vided in the product package and connect it
to a grounded power outlet.
If you need another power cord, please
yy
contact your local dealer or the nearest retail
store.
yy Do not put your fingers or
hand between the screen
and the base (chassis) when adjusting the
screen's height.
11
Adjusting the angle
WARNING
mounted on the stand base.
2 Adjust the angle of the screen. The angle of the
To avoid injury to the fingers when adjusting
yy
the screen, do not hold the lower part of the
monitor's frame as illustrated below.
screen can be adjusted forwards or backwards
for a comfortable viewing experience.
25 ° -5°
Be careful not to touch or press the screen
yy
area when adjusting the angle of the monitor.
Rear Side
Front Side
Do not put figure inside of stand.
yy
ENG
ENGLISH
1 Place the monitor in an upright position,
12
Pivot Feature
ENGLISH
ENG
The pivot feature allows the monitor to rotate 90°
clockwise and -90° counter clockwise.
1 Raise the monitor to the maximum height.
NOTE
2 Adjust the angle of the monitor in the direction
of the arrow as shown in the figure.
3 Rotate the monitor 90° clockwise and -90°
counter clockwise as shown in the figure.
yy Auto Pivot feature of the display is not supported.
yy The screen can be rotated easily using the
screen pivot shortcut key provided with your
Windows operating system. Note that some
Windows versions and some graphics card
drivers may use different settings for the screen
pivot key or may not support the pivot key at all.
yy Windows screen pivot shortcut keys
-- 0°: Ctrl + Alt + Up arrow key (↑)
-- 90°: Ctrl + Alt + Left arrow key (←)
-- 180°: Ctrl + Alt + Down arrow key (↓)
-- 270°: Ctrl + Alt + Right arrow key (→)
Head
Stand
Head
Stand
4 Complete the installation by rotating the
monitor 90° clockwise and -90° counter
clockwise as shown below.
WARNING
yy To avoid scratching the stand base, make sure
that when rotating the monitor using the pivot
feature, the stand does not make contact with
the monitor.
13
Swivel stand
WARNING
ENG
ENGLISH
yy Take care when rotating the monitor if the
cable is connected.
yy To avoid injury when rotating the display, do
not place your fingers between the display and
the stand base.
NOTE
Swivel (clockwise 45°)
yy The left or right side of the monitor head can
be slightly rotated up or down (up to 3°). Adjust
the horizontal level of the monitor head.
Monitor head
Swivel (counter clockwise 45°)
14
Using the Kensington security system
ENGLISH
ENG
The Kensington security system connector is
located at the back of the Monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit http://www.kensington.com .
Connect the Kensington security system cable
between the Monitor set and a table.
Detaching the Stand Body
1 Place the monitor’s screen face down. To
protect the screen from scratches, cover the
surface with a soft cloth.
2 Remove the stand from the monitor by pressing
the button on the bottom center of the back of
the monitor.
Installing the wall mount plate
This monitor supports the specification of the standard wall mount plate or compatible device.
1 Place the screen face down. To protect the
NOTE
Use of the Kensington lock is optional. The
yy
accessories can be purchased at your local
electronics store.
screen from scratches, cover the surface with a
soft cloth.
2 Detaching the Stand Body.
3 Place the wall mount plate onto the monitor
and align it with the screw holes.
4 Tighten the four screws to fix the plate to the
monitor using a screwdriver.
NOTE
The wall mount plate is sold separately.
yy
For more information on installation, refer to
yy
the wall mount plate's installation guide.
Be careful not to use excessive force when
yy
mounting the wall mount plate, as this can
damage the monitor's screen.
15
Wall Mount (A x B)
yy
Installing to a wall
B
100 mm
100 mm
100 mm
100 mm
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely
fixed to the monitor and to the wall.
1 If you use screw longer than standard, the monitor might be damaged internally.
2 If you use improper screw, the product might be
damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for it.
Wall Mount (A x
B)
Standard screw
Number of
screws
Wall Mount Plate
(Optional)
100 x 100
ENG
ENGLISH
Install the monitor at least 100 mm away from the
wall and leave about 100 mm of space at each
side of the monitor to ensure sufficient ventilation.
Detailed installation instructions can be obtained
from your local retail store. Please refer to the
manual to install and set up a tilting wall mounting
bracket.
A
CAUTION
Unplug the power cord before moving or inyy
stalling the monitor to avoid electric shocks.
Installing the monitor on the ceiling or on a
yy
slanted wall may result in the monitor falling
off, which could lead to injury. Please use
the genuine LG wall mounting bracket. For
more information, contact your local retail
store or a qualified installer.
Applying excessive force when fastening
yy
screws may cause damage to the monitor. Damage caused in this way will not be
covered by the product warranty.
Use the wall mounting bracket and screws
yy
that conform to the VESA standard. Damage caused by the use or misuse of inappropriate components will not be covered
by the product warranty.
Screw length from outer surface of back
yy
cover should be under 8mm.
Wall mount Pad
Back Cover
Wall mount Pad
Back Cover
Standard screw:
M4 x L10
Max.8mm
4
RW120
NOTE
Use the screws specified by the VESA stanyy
dard.
The wall mount kit includes the installation
yy
guide and all necessary parts.
The wall mounting bracket is optional. The
yy
accessories can be purchased at your local
retail store.
The length of the screw may differ for each
yy
wall mounting bracket. Ensure the correct
length screw is used.
For more information, please refer to the
yy
user manual for the wall mounting bracket.
16
USING THE MONITOR SET
ENGLISH
Connecting to a PC
Your Monitor set supports Plug & Play*.
yy
*Plug & Play: A PC recognizes a connected
device that users connect to a PC and turn
on, without device configuration or user
intervention.
HDMI connection
Transmits the digital video and audio signals from
your PC to the Monitor set. Connect the PC and
the Monitor set with the HDMI cable as shown in
the following illustrations.
DVI-D connection
Transmits a digital video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with a DVI cable as shown in the following
illustrations.
NOTE
If you use HDMI PC, it can cause compatibility
yy
problem.
Use a certified cable with the HDMI logo
yy
attached. If you do not use a certified HDMI
cable, the screen may not display or a
connection error may occur.
Recommended HDMI cable types
yy
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
17
DisplayPort connection
NOTE
For supporting DP MST feature, your PC
yy
graphics card must be certified to DP1.2
and MST Option.
To enable MST connection, use DP
yy
cable as provided in box (or other DP1.2
certified cable) and change the DP setting
to enable the Display Port 1.2 in Monitor
Menu.
The default out of factory setting is
yy
DP1.1a (Disable the Display Port 1.2)
When using MST, many monitor cannot be
yy
adjusted for OSD at the same time. Please
change the monitor settings.
MST with DisplayPort can be supported
yy
up to 4 monitors.
General
Language
English
Quick Settings
Picture
Sound
Power LED
Off
Automatic Standby
Off
DisplayPort1.2
Disable
Quick Charge
Off
OSD Lock
Off
General
Reset
Move
Ok
Exit
monitor
General
NOTE
There may be no video or audio output deyy
pending on the DP version of the PC.
yy If you use generic cables not certified by LG, the
screen may not display or there may be image
noises.
Language
English
Quick Settings
Picture
Sound
Power LED
Off
Automatic Standby
Off
DisplayPort1.2
Disable
Quick Charge
Off
OSD Lock
Off
General
Reset
Move
Ok
Exit
ENG
ENGLISH
Transmits the digital video and audio signals from
your PC to the monitor. Connect your PC to the
monitor using the display port cable as illustrated
below.
Connecting the monitor for DP
Multi-Stream Transport (MST)
function
18
ENGLISH
Connecting to AV Devices
Connecting Peripherals
HDMI connection
USB Type A port connection – mobile phone
Transmits the digital video and audio signals from
your AV devices to the monitor. Connect your AV
device to the monitor with the HDMI cable as illustrated below.
NOTE
Make sure to install the most recent Windows
yy
OS service pack before using the product.
Peripheral devices are sold separately.
yy
A keyboard, mouse, or USB device can be
yy
connected to the USB port.
Quick charge is available throngh only
yy
USB1 port.
When the Monitor is gone to Power off,Quick
yy
charge is not available.
The charging speed may vary depending on
yy
the device.
(sold separately)
NOTE
If you use HDMI PC, it can cause compatibility
yy
problem.
Use a certified cable with the HDMI logo
yy
attached. If you do not use a certified HDMI
cable, the screen may not display or a
connection error may occur.
Recommended HDMI cable types
yy
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
CAUTION
Cautions When Using a USB Device
A USB device with an automatic recognition
yy
program installed, or that uses its own driver,
may not be recognized.
Some USB devices may not be supported or
yy
may not work properly.
It is recommended to use a USB hub or hard
yy
disk drive with power supplied. (If the power
supply is not adequate, the USB device may
not be recognized properly.)
Cautions when using a charging function.
yy
Some mobile phones may not be supported
yy
or may not work properly.
19
Connecting Headphones
For using the USB downstream port, connect the
USB A/B type cable as picture
Connect peripherals to the monitor via the headphones port. Connect as illustrated.
(sold separately)
(sold separately)
NOTE
Peripheral devices are sold separately.
yy
If you use angled headphones, it may
yy
cause a problem with connecting another
external device to the monitor. Therefore, it is
recommended to use straight headphones.
Angle Type
Straight Type
Depending on the audio settings of the
yy
PC and external device, headphones and
speaker functions may be limited.
ENG
ENGLISH
USB Type B port connection – PC
20
CUSTOMIZING SETTINGS
ENGLISH
ENG
Activating the Main Menu
1 Press the Menu ( ) button.
2 Use the , , , buttons to adjust the options.
3 Press the Menu ( ) button to exit the OSD menu.
Monitor buttons
Button
Menu (
)
INPUT
Description
If the menu is inactive
Activates the main menu.
If the menu is active
Exits the OSD menu when the button is pressed.
If the menu is inactive
Adjusts the volume level of the monitor.
If the menu is active
Left directional key.
If the menu is inactive
Adjusts the volume level of the monitor.
If the menu is active
Right directional key.
Sets input mode. You can operate the change of input sig­nals.
• When two input signals over are con­nected and select the input menu, input signal(DVI/HDMI/DP) will be
changed sequentially.
• When only one signal is connected, it is automatically detected. The default setting is DVI.
Powers on or off.
(Power Button)
Power Indicator
When the monitor is in operating mode, the power indicator will turn white (on mode).
Customizing settings
Menu > Quick Settings
Brightness
Contrast
Ratio
Picture Mode
Description
Adjusts the color contrast and brightness of the screen.
Adjusts the screen ratio.
SMART ENERGY
SAVING
Wide
Displays the video in wide-screen, regardless of the video signal input.
Original
Displays a video according to the input video signal aspect ratio.
High
Enables SMART ENERGY SAVING you can save energy with this energyhigh efficient function.
Low
Enables SMART ENERGY SAVING you can save energy with this energylow efficient function.
Off
Disables SMART ENERGY SAVING .
* SMART ENERGY SAVING : Conserve energy by using luminance compensation algorithm.
NOTE
The display may look the same for Wide, Original options at the recommended resolution (1920 x 1080).
yy
The ratio is disabled in the interlaced signal.
yy
Saving Data depends on the Panel. So,those values should be different from each panel and panel
yy
vendor. If option of SMART ENERGY SAVING is High or Low, monitor luminance become higher or lower
depend on source.
21
Customizing settings
Picture Mode
Description
Custom
Allows the user to adjust each element. The color mode of the main menu can be adjusted.
Reader 1
It is a mode that the screen is adjusted to the best for the newspaper. If you want
screen more bright, you can control brightness in Menu OSD.
Reader 2
It is a mode that the screen is adjusted to the best for the cartoon. If you want screen
more bright, you can control brightness in Menu OSD.
Photo
Optimizes the screen to view photos.
Cinema
Optimizes the screen to improve the visual effects of a video.
Color
This mode is for users who cannot distinguish between red and green. It enables usWeakness ers with color weakness to easily distinguish between the two colors.
Picture Adjust
Game
Optimizes the screen for gameplay.
SUPER
RESOLUTION+
High
Optimized picture quality is displayed when a user wants crystal clear images. It is effective forhigh quality video or game.
Middle
The optimized picture quality is displayed when a user wants images between low and highmodes for comfortable viewing. It is effective for UCC
or SD video.
Low
The optimized picture quality is displayed when a user wants smooth and
natural images. It iseffective for slow-moving pictures or still images.
Off
Select this option for everyday viewing. SUPER RESOLUTION+ is
turned off in this mode.
Sharpness Adjusts the sharpness of the screen.
Black
Level
Sets the offset level (for HDMI only).
yy Offset: as a reference for a video signal, this is the darkest color the monitor can
display.
High
Keeps the current contrast ratio of the screen.
Low
Lowers the black levels and raises the white levels from the current contrast ratio of the screen.
Response Sets a response time for displayed pictures based on the speed of the screen. For a
Time
normal environment, it is recommended that you use Normal. For a fast-moving picture, it is recommended that you use High.
Setting to High may cause image sticking.
DFC
Black
Stabilizer
High
Sets the response time to High.
Middle
Sets the response time to Middle.
Low
Sets the response time to Low.
Off
Sets the response time to Off.
On
Adjusts the brightness automatically according to the screen.
Off
Disables the DFC feature.
Black Stabilizer
: You can control the black contrast to have better visibility in dark scenes.
Increasing the Black Stabilizer value brightens the low gray level area on the screen.
(You can easily distinguish objects on dark game screens.)
Reducing the Black Stabilizer value darkens the low gray level area and increases
the dynamic contrast on the screen.
ENG
ENGLISH
Menu > Picture
22
Color Adjust
ENGLISH
ENG
Gamma
The higher the gamma value, the darker the image becomes. Likewise,
the lower the gamma value, the lighter the image becomes. If you do not
need to adjust the gamma settings, select Off.
Color Temp
Selects the factory default picture color.
Warm: Sets the screen color to a reddish tone.
Medium: Sets the screen color between a red and blue tone.
Cool: Sets the screen color to a bluish tone.
Custom: The user can adjust it to red, green, or blue by customization.
Red/Green/Blue
You can customize the picture color using Red, Green, and Blue colors.
Six Color
Meets the user requirements for colors through adjusting the color and
saturation of the six colors (Red_Hue, Red_Saturation, Green_Hue,
Green_Saturation, Blue_Hue, Blue_Saturation, Cyan_Hue, Cyan_Saturation, Magenta_Hue, Magenta_Saturation, Yellow_Hue, Yellow_Saturation)
and saving the settings.
*Hue: Adjusts tone of the screen.
*Saturation: Adjusts the saturation of the screen colors. The lower the
value, less saturated and bright the colors become. The higher the value,
the more saturated and dark the colors become.
Reset
Returns the color settings to the default settings.
NOTE
This is subsidiary for color weakness user. Therefore if you feel uncomfortable with the screen,
yy
please turn off this function.
This function can’t distinguish some colors in some images.
yy
23
Customizing settings
Description
Volume
To adjust the Volume of headphone or speaker.
Main Audio
To choose the audio source input.
Menu > General
Description
Language
To choose the language in which the control names are displayed.
Power LED
Turns the power indicator on the front side of the monitor on/off.
On
The power indicator is automatically turned on.
Off
The power indicator is turned off.
Automatic Standby
The monitor will automatically switch to standby mode after a certain period.
DisplayPort 1.2
Enables or disables DisplayPort 1.2.
NOTE
yy Be sure to configure this option according to the DisplayPort version supported by
your graphics card. Set this option to Disable if your graphics card does not support
DisplayPort 1.2.
Quick Charge
Quick Charge is a feature that rapidly charges the device connected to the USB 3.0 port.
On
Enables Quick Charge.
Off
Disables Quick Charge.
NOTE
yyQuick charge is only available through the USB port 1.
yyThe charging speed may vary depending on the device.
OSD Lock
Prevents incorrect key input.
On
Key input is disabled.
NOTE
yy All features are disabled except Brightness, Contrast, Volume in Quick Settings, Input
and OSD Lock in General.
Off
Key input is enabled.
Menu > Reset
Description
Do you want to reset your settings?
Reset
Returns to the default settings.
Cancel
Cancel the select.
ENG
ENGLISH
Menu > Sound
24
ENGLISH
ENG
TROUBLESHOOTING
Check the following before calling for service.
No image appears
Is the power cord of the display
connected?
yy Check and see if the power cord is connected properly to the power outlet.
Is the power indicator light on?
yy Press the Power button.
Do you see an "Out of Range"
message on the screen?
yy This message appears when the signal from the PC (video card) is out of
horizontal or vertical frequency range of the display. See the 'Specifications'
section of this manual and configure your display again.
Do you see a "NO SIGNAL"
message on the screen?
yy After the monitor is on "NO SIGNAL", the monitor goes to DPM mode.
yy This is displayed when the signal cable between the PC and the monitor is
missing or disconnected. Check the cable and reconnect it.
yy If monitor is DPM with power LED off condition,user should be press twice DC
button for wake up monitor screen.
Can 't you control some functions in OSD?
Can't you select some menu in
OSD?
yy You can unlock the OSD controls at any time by entering the OSD lock menu
and changing items to off.
CAUTION
Check Control Panel ► Display ► Settings and see if the frequency or the resolution were
yy
changed. If yes, readjust the video card to the recommend resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the
yy
screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.
The setting method can differ by computer and O/S (Operation System), and resolution mentioned
yy
above may not be supported by the video card performance. In this case, please ask to the computer
or the video card manufacturer.
Display image is incorrect
The screen color is mono or
abnormal.
yy Check if the signal cable is properly connected and use a screwdriver to fasten
if necessary.
yy Make sure the video card is properly inserted in the slot.
yy Set the color setting higher than 24 bits (true color) at Control Panel ►
Settings.
The screen blinks.
yy Check if the screen is set to interlace mode and if yes, change it to the
recommend resolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display
driver?
yy Be sure to install the display driver from the display driver CD (or diskette) that
comes with your display. Or, you can also download the driver from our web
site: http://www.lg.com.
yy Make sure to check if the video card supports Plug&Play function.
The screen is flickering.
Did you select the recommended
resolution?
yy If the selected resolution is HDMI 1080i 60/50 Hz, the screen may be flickering.
Change the resolution to the recommended resolution 1080P.
25
24BK750Y
LCD Screen
Type
Resolution
Pixel Pitch
Maximum Resolution
TFT (Thin Film Transistor) LCD (Liquid Crystal Display)
Panel,Anti-Glare coating
0.2745 mm x 0.2745 mm
1920 x 1080 @ 60 Hz
Recommended Resolution 1920 x 1080 @ 60 Hz
Video Signal
Horizontal Frequency
HDMI : 30 KHz to 83 KHz
DVI : 30 KHz to 83 KHz
DP : 30 KHz to 83 KHz
Vertical Frequency
HDMI : 56 Hz to75 Hz
DP : 56 Hz to 75 Hz
DVI : 56 Hz to 75 Hz
Synchronization
Separate Sync.
Input Connector DVI-D IN, HDMI IN, DP(DisplayPort) IN, DP(DisplayPort) OUT, AUDIO IN(PC), H/P,USB
Power consump- On mode: 17.1 W Typ. ( ENERGY STAR® standard ) *
tion
23 W Typ. ( Outgoing condition ) **
Sleep Mode ≤ 0.5 W ( Outgoing condition )
Off Mode ≤ 0.003 W
Power Input
AC 100-240V ~ 50/60Hz 1.2 A
Environmental
Conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C (32 °F to 104 °F)
Less than 80 %
Storage Temperature
Storage Humidity
-20 °C to 60 °C (-4 °F to 140 °F)
Less than 85 %
Dimension
Monitor Size (Width x Height x Depth)
With Stand
539.4 mm x 523.9 mm x 276.1 mm
Without Stand
539.4 mm x 326.4 mm x 58.7 mm
Weight (Without
Packaging)
With Stand
6.2 kg
Without Stand
3.4 kg
Product specifications shown above may be changed without prior notice due to upgrade of product functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
** The On mode power consumption is measured with LGE test standard ( Full White pattern , Maximum
resolution).
ENG
ENGLISH
‌SPECIFICATIONS
26
ENGLISH
ENG
‌SPECIFICATIONS
27BK750Y
LCD Screen
Type
Resolution
Pixel Pitch
Maximum Resolution
TFT (Thin Film Transistor) LCD (Liquid Crystal Display)
Panel,Anti-Glare coating
0.3114 mm x 0.3114 mm
1920 x 1080 @ 60 Hz
Recommended Resolution 1920 x 1080 @ 60 Hz
Horizontal Frequency
HDMI : 30 KHz to 83 KHz
DVI : 30 KHz to 83 KHz
DP : 30 KHz to 83 KHz
Vertical Frequency
HDMI : 56 Hz to75 Hz
DP : 56 Hz to 75 Hz
DVI : 56 Hz to 75 Hz
Synchronization
Separate Sync.
Input Connector DVI-D IN, HDMI IN, DP(DisplayPort) IN, DP(DisplayPort) OUT, AUDIO IN(PC), H/P,USB
Power consump- On mode: 20.3 W Typ. ( ENERGY STAR® standard ) *
tion
28 W Typ. ( Outgoing condition ) **
Sleep Mode ≤ 0.5 W ( Outgoing condition )
Off Mode ≤ 0.003 W
Power Input
AC 100-240V ~ 50/60Hz 1.5 A
Video Signal
Environmental
Conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C (32 °F to 104 °F)
Less than 80 %
Storage Temperature
Storage Humidity
-20 °C to 60 °C (-4 °F to 140 °F)
Less than 85 %
Dimension
Monitor Size (Width x Height x Depth)
With Stand
611.5 mm x 542.9 mm x 276.1 mm
Without Stand
611.5 mm x 367.5 mm x 59.0 mm
Weight (Without
Packaging)
With Stand
7.6 kg
Without Stand
4.9 kg
Product specifications shown above may be changed without prior notice due to upgrade of product functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
** The On mode power consumption is measured with LGE test standard ( Full White pattern , Maximum
resolution).
27
Preset Modes (Resolution)
ENG
ENGLISH
DVI / HDMI / DP PC Timing
Display Modes (Resolution)
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Polarity(H/V)
720 x 400
31.468
70
-/+
640 x 480
31.469
60
-/-
640 x 480
37.500
75
-/-
800 x 600
37.879
60
+/+
800 x 600
46.875
75
+/+
1024 x 768
48.363
60
-/-
1024 x 768
60.023
75
+/+
1152 x 864
67.500
75
+/+
1280 x 1024
63.981
60
+/+
1280 x 1024
79.976
75
+/+
1680 x 1050
65.290
60
-/+
1920 x 1080
67.500
60
+/+
Recommend Mode
HDMI AV Timing
Factory support mode
(Preset Mode)
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
480P
31.50
60
O
576P
31.25
50
O
720P
37.50
50
O
720P
45.00
60
O
1080P
56.25
50
O
1080P
67.50
60
O
Recommend Mode
Indicator
Mode
LED Color
On Mode
White
Sleep Mode
LED Off
Off Mode
Off
HDMI
Make sure to read the Safety Precautions before using the product.
Keep the Owner’s Manual (CD) in an accessible place for future
reference.
The model and serial number of the SET is located on the back and
one side of the SET. Record it below should you ever need service.
MODEL
SERIAL
ENERGY STAR® is a set of power-saving guidelines
issued by the U.S.Environmental Protection Agency
(EPA).
As an ENERGY STAR® Partner LGE U. S. A.,
Inc. has determined that this product meets the
ENERGY STAR® guidelines for energy efficiency.
Refer to ENERGYSTAR.gov for more information on the ENERGY
STAR® program.
Download PDF
Similar pages