powerstation AC
Made for Smartphones, Tablets, Laptops,
& Other USB & AC Devices
Thank you for purchasing the mophie powerstation
AC universal battery. Your powerstation AC
battery is a compact yet powerful mobile charging
solution for laptops and USB-C equipped devices,
as well as other USB devices including tablets and
smartphones. Now you will be able to travel great
distances and be the master of your own destiny,
no longer bound by the limitations of your device’s
internal battery!
Package contains
•powerstation AC universal battery
• USB-C to USB-A cable
• Quick-start guide
Here’s a rundown of why your powerstation AC
battery is so great:
• High-density, high-output universal battery
charges laptops and other devices from its 110V
AC output (up to 100W max).
• Additional USB-C output port is USB-C PD
compatible, delivering up to 30W (9V/3A, 5V/3A,
15V/2A, 20V/1.5A) to USB-C equipped laptops,
smartphones and other compatible devices.
• Additional USB-A output port can deliver up
to 12W (5V/2.4A) and is compatible with most
USB devices.
AC output port is GFCI-protected.
AC, USB-C and USB-A outputs are all available to
charge at the same time (up to 100W total, max.).
powerstation AC battery recharges at fast
speeds via its USB-C port (up to 30W).
• Priority+ pass-through charging provides
power to a device connected to the USB-A port
before the powerstation AC battery starts to
recharge from its USB-C port.
• Track battery power at a glance with the
integrated four-light LED status indicator. You
can keep tabs on charging status and current
battery life. Know before you go!
Rechargeable for over 500 full cycles. Our battery
is built to last so you can do more, longer.
• Smart adaptive charging technology identifies
your connected device and always delivers the
fastest, most efficient charging speeds available.
• Digital Power Management circuitry provides
built-in short-circuit, overcharge and temperature
protection. Safety first!
The mophie powerstation AC battery has been
designed to charge laptops from its AC output,
and work with USB-C equipped laptops as well as
most popular tablets, smartphones and other USB
devices. The powerstation battery’s AC port is also
compatible with other 110V devices that are rated up
to 100W max, such as DSLR camera battery packs.
If you experience any issues with charging your
particular device, ensure that the powerstation
AC battery is fully charged and check the FAQ
section on this website.
As always, no matter what device you have, carefully
read through the Warning section in this manual
and in the quick-start guide included with your
powerstation AC battery before using it.
Charging your device using your powerstation
AC battery
IMPORTANT: Before using your powerstation AC
battery for the first time, fully charge it (so that
pressing the charge status button lights all 4
status LEDs).
Charging from the AC output
IMPORTANT: The battery’s AC port is rated at 110V
AC, up to 100W max. Do not connect devices rated
at more than 100W.
Open the battery’s AC port cover.
Press the AC charging button for 3 seconds. The
button’s LED will light up.
3. Connect the laptop’s charger or other device
to the battery’s AC port within 30 seconds to
begin charging.
- If the charging button LED goes off before
you connect the device, press the button
again and connect the device to the AC port
within 30 seconds.
- The charging button LED will remain on
while the AC device is being charged via the
battery's AC port.
NOTE: The AC output port is GFCI protected. If the
powerstation AC battery detects a fault the AC
output port will immediately shut off and the AC
charging button LED will turn off.
Charging a USB-C equipped laptop
Use a USB-C to USB-C cable (not supplied) to connect
the laptop to the powerstation AC battery’s USB-C
output port. Charging begins automatically.
•The powerstation AC battery can deliver up
to 30W (9V/3A, 5V/3A, 15V/2A, 20V/1.5A) via its
USB-C port.
IMPORTANT: DO NOT connect a USB-C equipped
laptop to the powerstation AC battery’s USB-A port.
Charging other devices
Connect the supplied cable or the cable that came
with your device to the powerstation AC battery’s
USB-C port or USB-A port and to your device.
Charging begins automatically.
•The powerstation AC battery can deliver up
to 30W (9V/3A, 5V/3A, 15V/2A, 20V/1.5A) via its
USB-C port.
•The powerstation AC battery can deliver up to
12W (5V/2.4A) via its USB-A port.
•The powerstation AC battery’s AC, USB-C and
USB-A output ports are all available to charge
at the same time (up to 100W total, max).
Recharging your powerstation AC battery
To charge your powerstation AC battery, use the
supplied cable (or a USB-C to USB-C cable) to connect
its USB-C port to a USB-C or USB-A wall charger or
car charger with an output of up to 3A.
•The powerstation AC battery can recharge at
fast speeds (up to 30W) with a compatible charger.
Priority+ pass-through charging
When you’re recharging your powerstation AC
battery, Priority+ pass-through charging provides
power to a device connected to its USB-A output
port first, before the powerstation AC battery starts
to recharge.
Recharging while connected to a laptop
You can recharge the powerstation AC battery
while it’s connected to a USB-C laptop that is also
connected to its wall charger. After connecting the
powerstation AC battery and laptop as shown in the
illustration below, press-and-hold the powerstation
AC battery’s status button for 3 seconds to begin
charging the powerstation AC battery.
Checking your powerstation AC battery’s
charging status
Press the status button on your powerstation AC
battery and the status LEDs will indicate its charge
level. Four LEDs means that the battery is fully
charged, while one LED means that it’s almost
empty. Know before you go!
Taking care of your powerstation AC battery
• Keep your powerstation AC battery dry and
away from moisture and corrosive materials.
• Do not clean your powerstation AC battery
with harsh chemicals, soaps or detergents. Just
wipe the case with a soft, water-dampened cloth.
• Make sure the powerstation AC battery’s USB
ports do not become contaminated with lint or
other debris. Use a canned-air type of product
periodically to ensure that the port openings
are clear.
Recharge your powerstation AC battery once
every three months when not in use. If you plan
on putting it away, fully charge it first (so that
pressing the charge status button lights all 4
status LEDs).
At mophie, we are dedicated to making the best
quality products. To back this up, this product
is warranted for 2 years from date of purchase.
This warranty does not affect any statutory rights
that you may be entitled to. Keep a copy of your
purchase receipt as proof of purchase. Be sure to
register your product at mophie.com. Failure to
register your product and/or provide proof of
purchase may void the warranty. For full details
regarding warranty terms and exclusions, please
visit: mophie.com/warranty.
Exclusions & limitations
Except for the limited warranty expressly set
forth or to the extent restricted or prohibited by
applicable law, mophie expressly disclaims any and
all other warranties express or implied, including any
warranty of quality, merchantability, or fitness for a
particular purpose, and you specifically agree that
mophie shall not be liable for any special, incidental,
indirect, punitive, or consequential damages of any
type on any mophie product. In addition to and
without limiting the generality of the foregoing
disclaimers, the limited warranty does not, under
any circumstances, cover the replacement or cost of
any electronic device or personal property inside or
outside of the mophie product.
Customer service
Telephone: 1-888-8mophie
International: +1 (269) 743-1340
Web: www.mophie.com/cs
Read all instructions and warnings prior to using this
product. Improper use of this product may result in
product damage, excess heat, toxic fumes, fire or
explosion, for which damages you (“Purchaser”), and
not mophie llc (“Manufacturer”) are responsible.
N Before using your powerstation AC battery
for the first time, fully charge it (pressing the
charge status button lights all 4 LEDs).
N Do not connect a device with a power draw of
more than 100 watts to the powerstation AC
battery’s AC connector.
N Do not store device in high-temperature
environment, including heat caused by
intense sunlight or other forms of heat. Do
not place device in fire or other excessively
hot environments.
N Be cautious of drops, bumps, abrasions, or other
impacts to this device. If there is any damage
to the device such as dents, punctures, tears,
deformities, or corrosion due to any cause,
discontinue use. Contact Manufacturer or
dispose of it in an appropriate manner at your
local battery-recycling center.
N The powerstation AC battery should be
operated only in open-air conditions. It should
not be operated in an enclosed, unventilated
space such as a carrying bag, pocket or purse.
Failure to follow these instructions may cause
damage to the battery by overheating.
N Do not disassemble this device or attempt to
re-purpose or modify it in any manner.
N Do not attempt to charge this device using
any method, apparatus, or connection other
than the device’s USB-C port. For questions or
instructions for the various ways to charge the
device refer to the illustrations in the Recharging
Your powerstation AC Battery section of this
user manual.
N Do not attempt to replace any part of this device.
N If this device is accessible to or may be used
by a minor, purchasing adult agrees to be
solely responsible for providing supervision,
instruction, and warnings. Purchaser agrees
to defend, indemnify, and hold Manufacturer
harmless for any claims or damages arising
from unintended use or misuse by a minor.
N All products have gone through a thorough
quality assurance inspection. If you find
that your device is excessively hot, is
emitting odor, is deformed, abraded, cut or is
experiencing or demonstrating an abnormal
phenomenon, immediately stop all product
use and contact Manufacturer.
N Never dispose of batteries in the garbage.
Disposal of batteries in the garbage is unlawful
under state and federal environmental laws
and regulations. Always take used batteries to
your local battery-recycling center.
This product is meant for use only in conjunction
with the appropriate device. Please consult your
device packaging to determine whether this
product is compatible with your particular device.
Manufacturer is not responsible for any damages to
any device incurred through the use of this product.
Manufacturer shall not in any way be liable to you or to
any third party for any damages you or any third party
may suffer as a result of use, intended or unintended,
or misuse of this product in conjunction with any
device or accessory other than the appropriate device
for which this product is designed. Manufacturer will
not be responsible for any damages you or any third
party may suffer as a result of misuse of this product
as outlined above. Purchaser agrees to defend,
indemnify, and hold Manufacturer harmless for any
claims or damages arising from unintended use or
misuse, including use with an unintended device.
mophie, powerstation, Power for all, Priority+, Stay
Powerful, the five-circles design, and the mophie
logo are trademarks of mophie inc. Lightning is a
trademark of Apple Inc. Patents: mophie.com/patents.
This device complies with part 15 of the FCC Rules
and RSS-Gen of IC Rules. Operation is subject to
the following two conditions: (1) This device may
not cause harmful interference, and (2) this device
must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced technician
for help.
CAUTION: To comply with the limits of the Class
B digital device, pursuant to Part 15 of the FCC
Rules, this device must be used with certified
peripherals and shielded cables. All peripherals
must be shielded and grounded. Operation with
non-certified peripherals or non-shielded cables
may result in interference to radio or reception.
MODIFICATION: Any changes or modifications of
this device could void the warranty.
This device CONFORMS TO UL STD. 2743
WEEE DECLARATION: All of our products are marked
with the WEEE symbol; this indicates that this
product must NOT be disposed of with other waste.
Instead it is the user’s responsibility to dispose of
their waste electrical and electronic equipment
by handing it over to an approved re-processor,
or by returning it to mophie, inc. for reprocessing.
For more information about where you can send
your waste equipment for recycling, please contact
mophie, inc. or one of your local distributors.
Download PDF
Similar pages