HP ProLiant m300 Server Cartridge

QuickSpecs
HP ProLiant m300 Server Cartridge
Overview
HP Moonshot System with the HP ProLiant m300 server cartridge was created for cost-effective Dynamic Content Delivery, front-end
Web and online analytics. The ProLiant m300 server cartridge has one Intel Avoton-based System on a Chip (SoC) server having eight
cores with integrated Ethernet along with one 2.5" hard drive and support for up to 32GB of memory on a compact cartridge.
The HP Moonshot System uses an innovative new architecture that results from one simple design tenet: to align purpose-built modules
with the right workload to provide optimal results for your environment. Traditional servers rely on dedicated components, including
management, networking, storage, power cords and cooling fans in a single chassis. In contrast, the Moonshot system shares these
chassis components and is capable of supporting 45 servers cartridge per 4.3U chassis.
This gives you the ability to generate greater revenue from a smaller footprint while driving down your operational costs.
i
Front View:
1. QR Code label
2.
3.
4.
5.
6.
7.
8.
9.
Rear View:
10. Two (2) DDR3 SODIMM memory slots
Cartridge Link LED/button
Cartridge UID LED/button
Drive LED
Cartridge health LED
Cartridge power LED/button
Two (2) DDR3 SODIMM memory slots
One (1) Intel® Atom™ Processor C2750
One (1) small form factor (SFF) drive
DA - 14736 Worldwide — Version 1 — December 9, 2013
Page 1
QuickSpecs
HP ProLiant m300 Server Cartridge
Overview
Models
HP ProLiant m300 Server Cartridge
NOTE: Must order a minimum of 15 identically configured HP ProLiant m300 server cartridges.
734619-B21
NOTE: For ordering the HP ProLiant m300 Server Cartridge, please see Step 1 of the Configuration to Order section
of this QuickSpecs.
DA - 14736 Worldwide — Version 1 — December 9, 2013
Page 2
QuickSpecs
HP ProLiant m300 Server Cartridge
Standard Features
NOTE: This document covers the HP ProLiant m300 Server Cartridge only.
NOTE: For information on HP Moonshot 1500 Chassis and HP Moonshot Switch and Uplink Modules, please see the following:
HP Moonshot 1500 Chassis QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/14527_div/14527_div.html
HP Moonshot-45G Switch Module QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/14731_div/14731_div.html
HP Moonshot- 6SFP Uplink Module QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/14733_div/14733_div.html
Processor
Intel® Atom™ Processor C2750 , 2.4 GHz
Cache Memory
1MB shared per 2 cores
Memory Protection
ECC
Memory
Type
DIMM Slots Available
Maximum Configuration
Network Controller
Integrated into the System on a Chip (SoC)
Dual 1Gbe NIC
Storage Controller
Integrated into the System on a Chip (SoC)
Maximum Internal
Storage (per Moonshot
Server)
Quick Release SFF SATA
Interfaces
Cartridge Link LED/button
Cartridge UID LED/button
Drive LED
Cartridge health LED
Industry Standard
Compliance
PXE Support
PCIe 3.0
HP 8GB (1x8GB) PC3L-12800 (DDR3-1600) SODIMM Low Voltage Memory
Four (4) SODIMM Slots
32GB (4x8GB)
1TB
500GB
240GB
1 x 1TB
1 x 500GB
1 x 240GB
Quick Release SFF SATA
SSD
NOTE: Each cartridge will ship with one (1) SATA HDD or SATA SSD hard drive.
DA - 14736 Worldwide — Version 1 — December 9, 2013
Page 3
QuickSpecs
HP ProLiant m300 Server Cartridge
Standard Features
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Canonical Ubuntu
NOTE: Only 64-bit versions of these operating systems are supported.
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server including how to purchase from
HP, please visit our OS Support Site at: http://www.hp.com/go/ossupport and our driver download page:
http://www.hp.com/go/servers/Moonshot/download
Enclosure
The HP Moonshot 1500 Chassis is designed to support the following:
The HP Moonshot 1500 Chassis is 4.3U high and holds up to forty-five (45) HP ProLiant m300 Server
Cartridge plugged vertically.
Server cartridges, switches, uplinks, power supplies, fans, and HP Moonshot 1500 Chassis
Management module are all designed to fit into the HP Moonshot 1500 Chassis.
NOTE: Can be racked as either a 5U tall chassis or as three chassis in 13U.
NOTE: For additional chassis information, please see:
http://h18000.www1.hp.com/products/quickspecs/14527_div/14527_div.html
Form Factor
HP ProLiant m300 Server Cartridge is a server cartridge that plugs into the HP Moonshot 1500 Chassis.
On System Management
On System Management provided via HP Moonshot 1500 Chassis Management module, complete with
support for SL-APM: For more information, visit:
http://h18000.www1.hp.com/products/quickspecs/14527_div/14527_div.html
The HP Moonshot 1500 Chassis Management module manages the health of the chassis and servers and
includes a command-line interface accessible via SSH to configure the chassis and server settings and
control server power and UID lights, use Virtual Serial Port to servers, and to flash firmware in the chassis.
It also supports IPMI management.
HP Moonshot iLO Chassis Management Firmware is the gateway for aggregated chassis management on
HP Moonshot. Moonshot iLO CM firmware reduces cost and power by sharing four iLO modules across the
nodes and other system components. As a single point of access to the chassis, Moonshot iLO CM firmware
allows you to configure, update, and operate HP Moonshot via CLI, IPMI, and remote serial console access.
For more information, see the HP Moonshot iLO Chassis Management Firmware User Guide on the HP
Project Moonshot Information Library (http://www.hp.com/go/moonshot/docs).
DA - 14736 Worldwide — Version 1 — December 9, 2013
Page 4
QuickSpecs
HP ProLiant m300 Server Cartridge
Standard Features
HP Insight Management
HP Service Pack for
ProLiant
HP Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM)
provide a comprehensive approach to firmware and system software
maintenance. Together they provide better operating stability and ensure
maximum uptime. The SPP will be updated at a predictable cadence, typically
coinciding with new HP server hardware launches. By enabling firmware to be
updated online and integrating firmware and system software updates in one
operation, HP SUM and the SPP offer faster updates of individual servers and
dramatically faster updates of entire BladeSystem enclosures. Further
improving system uptime and stability is the fact that HP provides 12 months
of support for each Service Pack for ProLiant release.
The user experience around HP SUM and the SPP has been improved in several
ways, starting with the web download. A single web page provides access to a
single download containing both the latest version of HP SUM and the latest
SPP. Optional smaller subsets with only specific types of servers or specific
operating systems are offered to save on download time. The HP SUM
application provides a straightforward, intuitive user interface that guides the
user through the steps of discovery, analyses and update, providing
comprehensive information on available updates, criticality and
interdependencies. This information is also available in reports. By providing
the option of multiple local or shared repositories which can be easily updated
from hp.com, HP SUM provides the tools to optimize stability and consistency
throughout the company. While HP SUM and the SPP recommend the
combinations of firmware and system software that HP has found to be the
best practice, the application gives customers the flexibility to set their own
specific baseline.
The Service Pack for ProLiant has been rigorously tested with specific
attention for interaction between firmware, drivers and agents both within the
server as well as in interaction with the BladeSystem enclosure components
(Onboard Administrator and Virtual Connect). This testing ensures the highest
quality as well as providing the input for HP SUM to deploy updates taking into
account all interdepencies, when determining the correct updates and order of
update deployment.
NOTE: The Service Pack for ProLiant (which includes HP SUM) can be
downloaded from www.hp.com/go/spp/download. More information can be
found: http://www.hp.com/go/SmartUpdate, www.hp.com/go/spp and
http://www.hp.com/go/hpsum
Security
Power-on password
Setup password
Serial interface control
Power switch security
Administrator's password
DA - 14736 Worldwide — Version 1 — December 9, 2013
Page 5
QuickSpecs
HP ProLiant m300 Server Cartridge
Standard Features
Warranty
This product is covered by a global limited warranty and supported by HP Services and a worldwide
network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available
for three years from date of purchase. Support for software and initial setup is available for 90 days from
date of purchase. Enhancements to warranty services are available through HP Care Pack services or
customized service agreements. Hard drives have either a one year or three year warranty; refer to the
specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 1-Year Parts, 0-Year Labor, 0-Year Onsite support. Warranty terms may
vary by region. Additional information regarding worldwide limited warranty and technical support is
available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 14736 Worldwide — Version 1 — December 9, 2013
Page 6
QuickSpecs
HP ProLiant m300 Server Cartridge
Optional Features
High Performance
Clusters
HP Insight Cluster
Management Utility
HP Insight Cluster Management Utility (Insight CMU) is an HP-licensed and HPsupported suite of tools that are used to manage large-scale systems. Insight
CMU includes software for the centralized provisioning, management and
monitoring of nodes. Insight CMU makes the administration of clusters more
user friendly, efficient, and error free than if they were being managed by
scripts, or on a node-by-node basis. For more information on HP Insight
Cluster Management Utility, please contact your sales representative or go to:
http://www.hp.com/go/cmu.
Factory Express Portfolio HP Factory Express offers configuration, customization, integration and deployment services for HP
for Servers and Storage servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as asset tagging, and custom
packaging. HP products supported through Factory Express include a wide array of servers and storage:
HP Moonshot, HP Integrity, HP ProLiant, HP ProLiant Server Blades, and HP BladeSystem, HP 9000 servers
as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server model please contact your sales
representative or go to: http://www.hp.com/go/factory-express.
DA - 14736 Worldwide — Version 1 — December 9, 2013
Page 7
QuickSpecs
HP ProLiant m300 Server Cartridge
Service and Support
Service and Support
HP Technology Services for Moonshot
Capitalizing on the Moonshot 1500 System requires a service partner who understands your increasingly
complex business technology environment. That's why it makes sense to team up with the people who
know HP infrastructure hardware and software best - the experienced professionals at HP Technology
Services.
HP is pleased to include full software support for Ubuntu Linux as part of your Moonshot chassis purchase.
For chassis supporting revenue-generating or production level workloads, consider purchasing a level of
support that matches your requirements.
Protect your business beyond warranty with HP Care Pack Services
HP sells support in easy-to-buy, preconfigured packages with the combination of services, coverage and
duration to fit your needs and budget. With Moonshot, we are introducing a new, simpler set of services.
Simply choose the service level that best fits the criticality of your hardware.
HP Foundation Care
HP introduces new Foundation Care services offer scalable reactive support-packages for HP Moonshot
and software. You can choose the type and level of service that is most suitable for your IT and business
needs. The Moonshot 1500 Care Pack services cover the Moonshot 1500 Chassis and the Moonshot servers
with one single Care Pack SKU. Entitlement of support requires the customer to provide the 1500 chassis
serial number. All HP components structured to the Moonshot System are covered by Care Pack services
inclusive of switches, power supplies, and fans. HP Foundation Care services include hardware support,
basic software support and collaborative call handling for software questions related to industry leading
operating systems and software. For a complete list of software products covered, refer to:
www.hp.com/services/collaborativesupport.
Full software support, including call management and ownership thru to resolution is available for select
third party software. As stated earlier, support for Ubuntu software is included in the purchase of your
Moonshot chassis.
HP Datacenter Care
HP Datacenter Care offers you a flexible, tailored, relationship-based approach to support the most
demanding data centers handling the demands of hyperscale computing. This is an environment level
service, purchased once to support your Moonshot environment. Other equipment may be included in this
agreement for holistic datacenter coverage. With HP Datacenter Care, you still have the choice of HP
Foundation Care reactive support which you purchase with each chassis.
HP Datacenter Care is flexible enough to deliver exactly what you need in one relationship. All Datacenter
Care support is tailored to your needs, based on our experience with hyperscale customers:
Assigned account team, led by an account support manager (ASM) who knows your business and
your IT environment and is responsible for the quality service delivery and experience.
Enhanced call handling for the best call experience with rapid escalation and incident resolution
through the HP Hyperscale Center of Excellence
Proactive and reactive support, configured to deliver the level of support needed by the different
data center components and meeting both service-level agreement (SLA) and cost targets
Then add on other services that are tailored to your specific needs, including:
HP Self-Service Spares Service answers the question: What do you do when you need parts? We can set it
DA - 14736 Worldwide — Version 1 — December 9, 2013
Page 8
QuickSpecs
HP ProLiant m300 Server Cartridge
Service and Support
up so that you get spare parts onsite through our automated self-service spares. You simply go to the part
of your data center where the parts live, scan them out, scan in the broken one, and you're done. We
maintain your inventory of good spares, so that what you need is ready to go when you need it. And we
provide monthly service excellence reports illustrating onsite inventory performance.
To obtain further information or to order HP Datacenter Care Service as described above, contact a local
HP sales representative. Please see the Additional Options section of this QuickSpecs for additional
information.
HP Moonshot Installation & Startup Service
HP Installation and Startup Service for the Moonshot System provides for the installation of one system
and its associated Moonshot servers and network switches, as well as operating system deployment and
basic configuration of OS network parameters to establish network connectivity
In response to the needs of the majority of HP Moonshot System customers, this fixed-price/fixed
deliverable service targets new hardware installation and software deployments for the 1500
infrastructure. For more advanced installation, configuration, and integration requirements, custom
deployments are available through a customized Statement of Work. . Please see the Additional Options
section of this QuickSpecs for additional information.
For more information on HP Services, contact any of our worldwide sales offices or visit one of the
following websites:
HP support services: www.hp.com/services/alwayson
HP Care Pack services: www.hp.com/services/carepack
Recommended HP Care Pack Services for your HP product
Optimized Care
3-Year HP Foundation Care Call to Repair
This is HP's highest level of reactive support giving you our commitment to have the hardware operational
within six hours of opening the call with us. This service level includes hardware coverage plus software
diagnosis support with collaborative call management for a broad spectrum of third party software
products including O/S and hypervisors.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA4-8877ENW.pdf
Standard Care
3-Year HP Foundation Care 24x7
This service level provides consistent, reliable reactive support with the broadest coverage window which
is recommended when maintenance must be performed outside business hours. Calls may be opened
24x7. Should an onsite visit be needed, our commitment is to respond onsite within four hours. Software
call back commitment is two hours.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-8877ENW.pdf
DA - 14736 Worldwide — Version 1 — December 9, 2013
Page 9
QuickSpecs
HP ProLiant m300 Server Cartridge
Service and Support
Basic Care
3- Year HP Foundation Care Next Business Day
This service level provides the most economical support coverage and is designed for non-revenue
impacting systems. Calls may be opened 24x7. Should an onsite visit be needed, our commitment is to
respond onsite the next business day. Software call back commitment is two hours, during regular
business hours.
For more information on HP Care Pack services, contact any of our worldwide sales offices or resellers or
visit our website at: www.hp.com/go/carepack
Defective Media
Retention (DMR) and
Comprehensive Defective
Material Retention
If your business deals with sensitive or legally protected data, you know that it's not a simple matter to
return a defective hardware component, but keeping it conflicts with the terms and conditions of many
standard warranty agreements. If you don't return the component, you'll be charged for the replacement
part.
HP Foundation Care services are available with defective media retention of failed hard drives and
comprehensive defective material retention of those other data-retentive components, such as memory,
switches, processors and more. This may be purchased as an optional add-on to your HP Foundation Care
service purchase. This service is critical for customers who:
Need to control and secure their classified, proprietary and confidential data.
Are subject to current data privacy regulations.
Want a simpler, more cost-effective solution when choosing not to return a malfunctioning disk
drive or other data retentive component.
For more information on our data privacy services, see: www.hp.com/services/dataprivacy.
HP Support Center
HP provides several tools that make it simpler to get help from HP:
HP Support Center is personalized online support portal with access to information, tools and experts to
support HP business products. Submit support cases online, chat with HP experts, access support
resources or collaborate with peers. Learn more: http://www.hp.com/go/hpsc
HP's Support Center Mobile App allows you to resolve issues yourself or quickly connect to an agent for
live support. Now, you can get access to personalize IT support anywhere, anytime.
HP Support Center are available at no additional cost with a HP warranty, HP Care Pack or HP contractual
support agreement.
NOTE: HP Support Center Mobile App is subject to local availability.
DA - 14736 Worldwide — Version 1 — December 9, 2013
Page 10
QuickSpecs
HP ProLiant m300 Server Cartridge
Service and Support
Parts and Materials
HP will provide HP-supported replacement parts and materials necessary to maintain the
covered hardware product in operating condition, including parts and materials for available
and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the
maximum usage limitations as set forth in the manufacturer's operating manual, product
quick-specs, or the technical product data sheet will not be provided, repaired, or replaced as
part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by HP due to malfunction.
For more information
To learn more on HP Moonshot System, please contact your HP sales representative.
DA - 14736 Worldwide — Version 1 — December 9, 2013
Page 11
QuickSpecs
HP ProLiant m300 Server Cartridge
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE: Factory Integrated Models must start with an HP Moonshot 1500 Chassis. Each Moonshot Chassis will be ordered with minimum
configurations as follows:
Minimum of fifteen (15)identically configured Moonshot server cartridges per chassis.
NOTE: Each of the 15 server cartridges in the chassis will contain an identically sized HDD or SDD.
Three (3) 1500W Common Slot Platinum Plus Power Supplies
NOTE: Additional power supply kits may be ordered to achieve N+1 redundancy.
One (1) HP Moonshot-45G Switch Module
And
One (1) HP Moonshot- 6SFP Uplink Module
NOTE: A second Switch and Uplink Module Kit may be ordered to give a redundant network configuration or to enable two separate
networks utilizing different Moonshot servers.
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of
an HP approved configurator. Contact your local sales representative for additional information.
Step 1: Base Configuration (Choose one HP Moonshot 1500 Chassis)
HP Moonshot 1500
Chassis
HP Moonshot 1500 45x m300 Configure-to-order Chassis
NOTE: Must order a minimum of 15 identically configured Moonshot servers.
747049-B21
Step 1A: Configure Moonshot Servers (one of each unless otherwise noted)
HP Moonshot Server
HP Hard drives
HP ProLiant m300 1P C2750 CPU 32GB Configure-to-order Server Cartridge
NOTE: Must order a minimum of 15 identically configured Moonshot server.
NOTE: Each Moonshot server comes preconfigured with four 8 GB SODIMM preinstalled. This is the only memory configuration available on this server.
NOTE: Each Moonshot cartridge is pre-configured with a single Intel® Atom™ Processor
C2750 running at 2.4 GHz. This processor is eight-core, hyperthreaded, and contains 1
MB Cache shared per two cores. The C2750 is the only processor option available and
represents a balance of performance and energy efficiency.
6G SATA Quick Release SFF (2.5-inch) Midline (MDL) Drives
734619-B21
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) Quick Release Midline 1yr Warranty Hard Drive
HP 500GB 6G SATA 7.2K rpm SFF (2.5-inch) Quick Release Midline 1yr Warranty Hard
Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html
6G SATA Value Endurance Quick Release SFF (2.5-inch) Enterprise Value Solid State
Drives
632080-B21
632078-B21
HP 240GB 6G SATA Value Endurance SFF 2.5-in Quick-release Enterprise Value 3yr Wty
Solid State Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14038_div/14038_div.html
NOTE: The non-hot plug hard drives use a quick release carrier.
718180-B21
DA - 14736 Worldwide — Version 1 — December 9, 2013
Page 12
QuickSpecs
HP ProLiant m300 Server Cartridge
Configuration Information - Factory Integrated Models
Step 2: Choose Required Options (one of each unless otherwise noted)
Power Supplies
Networking
HP Common Slot Platinum Plus Power Supply Kits
NOTE: 94% efficiency
HP 1500W Common Slot Platinum Plus Hot Plug Power Supply Kit
NOTE: Power Specification and Technical Content for supported power supplies can be
found at:
http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
NOTE: Minimum of three and maximum of four power supplies per chassis when
configured with the HP Moonshot Server (PN 734619-B21).
684532-B21
HP Moonshot 45G Switch Module Kit
HP Moonshot 6SFP Uplink Module Kit
NOTE: Must order one of each the Switch Kit and Uplink Kit per chassis.
NOTE: Maximum of two of each the Switch Kit and Uplink Kit per chassis to allow
configurations with redundant or dual networks.
704644-B21
704646-B21
Step 3: Choose additional Factory Integration Options
HP Rack Adapter
HP 13U FIO Rack Adapter Kit for 3X4.3U Chassis
NOTE: Group the HP Moonshot 1500 Chassis units into a 13U space. Order one per three
chassis. The 0.66U spacer is not used when selecting this option.
681677-B21
Step 4: Choose additional options for factory integration
HP Power Cords
HP C13 - Nema 5-15P US/CA 110V 10Amp 1.83m Power Cord
HP C13 - GB-1002 CN 250V 10Amp 1.83m Power Cord
HP C13 - IRAM -2073 AR 250V 10A 2.5m Power Cord
HP C13 - Nema 5-15P TH/PH 250V 10Amp 1.83m Power Cord
HP C13 - CNS-690 TW 110V 13Amp 1.83m Power Cord
HP C13 - IS-1293 IN 240V 6Amp LV 2.0m Power Cord
HP C13 - KSC- 8305 KR 250V 10Amp 1.83m Power Cord
HP C13 - SI-32 IL 250V 10Amp 1.83m Power Cord
HP C13 - SEV 1011 CH 250V 10Amp 1.83m Power Cord
HP C13 - DK-2.5A DK 250V 10Amp 1.83m Power Cord
HP C13 - SABS-164 ZA 250V 10Amp 2.5m Power Cord
HP C13 - CEE-VII EU 250V 10Amp 1.83m Power Cord
HP C13 - AS3112-3 AU 250V 10Amp 2.5m Power Cord
HP C13 - BS-1363A UK/HK/SG 250V 10Amp 1.83m Power Cord
HP C13 - CEI-23-50 IT/CL 250V 10Amp 1.83m Power Cord
HP C13 - JIS C8303 JP 100V 12Amp 2.0m Power Cord
HP C13 - IS-1293 IN 250V 10Amp HV 2.5m Power Cord
HP C13 - C14 WW 250V 10Amp Flint Gray 2.0m Jumper Cord
DA - 14736 Worldwide — Version 1 — December 9, 2013
AF556A
AF557A
AF558A
AF559A
AF561A
AF562A
AF560A
AF564A
AF565A
AF566A
AF567A
AF568A
AF569A
AF570A
AF571A
AF572A
SG579A
AF573A
Page 13
QuickSpecs
HP ProLiant m300 Server Cartridge
Configuration Information - Factory Integrated Models
HP C13 - NBR-14136 BR 250V 10Amp 1.83m Power Cord
HP C13 - C14 WW 250V 10Amp 2.0m Jumper Cord
HP C13 - C14 WW 250V 10A Gray 0.7m Jumper Cord
HP C13 - C14 WW 250V 10A Gray 1.37m Jumper Cord
HP C13 - C14 WW 250V 10A Gray 3.0m Jumper Cord
HP C13 - Nema 6-15P US 250V 15A JP 3.6m Power Cord
DA - 14736 Worldwide — Version 1 — December 9, 2013
AF591A
A0K02A
A0K03A
A0K04A
A0K06A
A0N33A
Page 14
QuickSpecs
HP ProLiant m300 Server Cartridge
Additional Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of
an HP approved configurator. Contact your local sales representative for additional information.
High Performance
HP Insight Cluster Management Utility Media
BD477A
NOTE: For additional license kits please see the QuickSpecs at:
Clusters
http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html
HP SL Advanced Power
Manager
The SL Advanced Power Manager is an optional rack level solution for the HP Moonshot
System which enables server-level DC (or hardware) power on and off and server-level
monitoring. In addition, the SL APM will automatically discover hardware components
which are connected into the SL APM solution.
The SL APM does not replace rack PDUs, but is designed to enable the utilization of
basic, low cost, rack PDUs while providing the functionality of 'switched' PDUs (which
provide hardware power on/off of individual servers by turning off the AC power to the
power supplies of a given server). Because the HP Moonshot System share power
supplies to optimize power efficiency, using 'switched' PDUs to turn off all the power
supplies in the chassis will result in the loss of all server nodes in that chassis. The SL
APM solves this by allowing server node-level hardware power on/off of the DC power
to the individual server node motherboards.
HP SL Advanced Power Manager Kit
HP SL Advanced Power Manager Distribution Module Kit
538084-B21
620002-B21
SFP Options
HP BLc Virtual Connect 1Gb SX Small Form Factor Pluggable Option Kit
HP BLc Virtual Connect 1Gb RJ-45 Small Form Factor Pluggable Option Kit
453151-B21
453154-B21
SFP+ Options
HP BladeSystem c-Class 10Gb Short Range Small Form-Factor Pluggable Option
455883-B21
Direct Attach Cables
HP BladeSystem c-Class Small Form-Factor Pluggable .5m 10GbE Copper Cable
HP BladeSystem c-Class Small Form-Factor Pluggable 1m 10GbE Copper Cable
HP BladeSystem c-Class Small Form-Factor Pluggable 3m 10GbE Copper Cable
HP BladeSystem c-Class Small Form-Factor Pluggable 5m 10GbE Copper Cable
HP BladeSystem c-Class Small Form-Factor Pluggable 7m 10GbE Copper Cable
HP X242 SFP+ SFP+ 1m Direct Attach Cable
HP X242 SFP+ SFP+ 3m Direct Attach Cable
HP X242 SFP+ SFP+ 7m Direct Attach Cable
HP X240 10G SFP+ SFP+ 0.65m DA Cable
HP X240 10G SFP+ SFP+ 1.2m DA Cable
HP X240 10G SFP+ SFP+ 3m DA Cable
HP X240 10G SFP+ SFP+ 5m DA Cable
HP 3m C-series Passive Copper SFP+ Cable
HP 5m C-series Passive Copper SFP+ Cable
HP 1m B-series Active Copper Cable with Integrated SFP+ Transceiver
487649-B21
487652-B21
487655-B21
537963-B21
487658-B21
J9281B
J9283B
J9285B
JD095B
JD096B
JD097B
JG081C
AP784A
AP785A
AP818A
DA - 14736 Worldwide — Version 1 — December 9, 2013
Page 15
QuickSpecs
HP ProLiant m300 Server Cartridge
Additional Options
HP 3m B-series Active Copper Cable with Integrated SFP+ Transceiver
HP 5m B-series Active Copper Cable with Integrated SFP+ Transceiver
AP819A
AP820A
HP Rail Kits
(Chassis Specific)
HP 4.3U Server Rail Kit
HP 0.66U Spacer Blank Kit
NOTE: For data center airflow management purposes, it is recommended that either
the .66U Spacer Blank or the 13U FIO Rack Adapter Kit can be ordered.
NOTE: The HP 4.3U Rail Kit is required to be ordered for every chassis to properly install
the chassis into a rack.
NOTE: The .66U Spacer Blank kit may be ordered and will give an even 5U (4.3U+0.66U)
spacing in a rack. This would enable installing up to 8 chassis in a 42U rack. It is also
possible to stack up to 9 chassis in a 42U rack using the 13U FIO Rack Adapter Kit. (See
Step 3 of the Factory Integrated Models section). If the 13U kit is used, the .66U spacer
would not be used and vice versa.
681254-B21
681260-B21
Rack Adapter
HP 13U FIO Rack Adapter Kit for 3X4.3U Chassis
NOTE: Group the HP Moonshot 1500 Chassis units into a 13U space. Order one per three
chassis. The 0.66U spacer is not used when selecting this option.
681677-B21
HP Rack Series
HP Intelligent Series Rack
HP 636 1200mm Shock Intelligent Series Rack
HP 642 1200mm Pallet Intelligent Series Rack
HP 642 1200mm Shock Intelligent Series Rack
HP 647 1200mm Pallet Intelligent Series Rack
HP 647 1200mm Shock Intelligent Series Rack
NOTE: Rack chosen is required to have 1200mm to provide space for cable
management arm at the rear of the chassis and host PDU in the rear of the rack.
NOTE: Please see the QuickSpecs for Technical Specifications such as height, width,
depth, weight, and color:
http://h18000.www1.hp.com/products/quickspecs/14223_div/14223_div.html
(Worldwide)
NOTE: For additional information regarding Rack Cabinets, please see the following
URL: http://www.hp.com/go/rackandpower.
DA - 14736 Worldwide — Version 1 — December 9, 2013
BW900A
BW907A
BW908A
BW913A
BW914A
Page 16
QuickSpecs
HP ProLiant m300 Server Cartridge
Additional Options
HP Rack Options
KVM Consoles
HP TFT7600 KVM Console US Kit
HP TFT7600 KVM Console UK Kit
HP TFT7600 KVM Console GR Kit
HP TFT7600 KVM Console FR Kit
HP TFT7600 KVM Console Itl Kit
HP TFT7600 KVM Console SP Kit
HP TFT7600 KVM Console Den Kit
HP TFT7600 KVM Console Nw Kit
HP TFT7600 KVM Console SE-FI Kit
HP TFT7600 KVM Console Swi Kit
HP TFT7600 KVM Console Port Kit
HP TFT7600 KVM Console Bel Kit
HP TFT7600 KVM Console JPN Kit
HP TFT7600 KVM Console Rus Kit
HP TFT7600 KVM Console Intl Kit
HP TFT7600 KVM Console US TAA Kit
HP 0x2x16 KVM SVR CNSL G2 VM CAC SW
HP 0x2x32 KVM SVR CNSL G2 VM CAC SW
HP 1x1Ex8 KVM IP CNSL G2 VM CAC SW
HP 2x1Ex16 KVM IP CNSL G2 VM CAC SW
HP 4x1Ex32 KVM IP CNSL G2 VM CAC SW
AZ870A
AZ871A
AZ872A
AZ873A
BW914A
AZ875A
AZ876A
AZ877A
AZ878A
AZ879A
AZ880A
AZ881A
AZ882A
AZ883A
AZ884A
AZ885A
AF618A
AF619A
AF620A
AF621A
AF622A
HP Uninterruptible Power HP Rack-mountable UPS
Systems
HP R1500 G3 Uninterruptible Power Supply (UPS)
HP R1.5kVA G3 1U NA Uninterruptible Power System
HP R1.5kVA G3 1U JP/TW Uninterruptible Power System
HP R1.5kVA G3 1U INTL Uninterruptible Power System
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14059_div/14059_div.html
(Worldwide)
HP R/T3000 G2 Uninterruptible Power System (UPS)
AF469A
AF470A
AF471A
HP R/T3000 G2 2U L530 Low Voltage NA/JP Uninterruptible Power System
HP R/T3000 G2 2U L620 High Voltage NA/JP Uninterruptible Power System
HP R/T3000 G2 2U Detachable Cord High Voltage INTL Uninterruptible Power System
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14058_div/14058_div.html
(Worldwide)
NOTE: For additional information on HP Uninterruptible Power Systems please go to:
www.hp.com/servers/rackups.
NOTE: For additional information on sizing your server, please reference:
http://www.upssizer.com.
AF466A
AF467A
AF468A
DA - 14736 Worldwide — Version 1 — December 9, 2013
Page 17
QuickSpecs
HP ProLiant m300 Server Cartridge
Additional Options
NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and
Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That
link will list cable descriptions, requirements, and specifications for UPS and PDU units.
Please see the following link: www.hp.com/products/powercords.
HP Intelligent Power
iPDU Core Units
Distribution Units (iPDU) HP 4.9kVA 24A Single Phase NA/JP Core Intelligent Modular Power Distribution Unit
HP 8.3kVA 40A Single Phase NA/JP Core Intelligent Modular Power Distribution Unit
HP 8.6kVA 24A Three Phase NA/JP Core Intelligent Modular Power Distribution Unit
HP 17.3kVA 48A Three Phase NA/JP Core Intelligent Modular Power Distribution Unit
HP 7.3kVA 32A Single Phase INTL Core Intelligent Modular Power Distribution Unit
HP 11kVA 16A Three Phase INTL Core Intelligent Modular Power Distribution Unit
HP 22kVA 32A Three Phase INTL Core Intelligent Modular Power Distribution Unit
HP 14.4kVA 40A Three Phase NA/JP Intelligent Modular Power Distribution Unit
iPDU Extension Bars
HP Basic Power
Distribution Units
AF520A
AF521A
AF522A
AF523A
AF525A
AF526A
AF527A
AF533A
HP 5xC13 Intelligent PDU Extension Bar G2 Kit
HP 5xC13 Outlets Power and UID LEDs Pair Standard Extension Bar
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13650_div/13650_div.html
(Worldwide)
AF547A
AF528A
HP 2.8kVA 120 Volt 18 Outlet NA/JP Basic Power Distribution Unit
HP 3.6kVA 200-240 Volt 12 Outlet WW Basic Power Distribution Unit
HP 3.6kVA 200-240 Volt 20 Outlet WW Basic Power Distribution Unit
HP 4.9kVA 208 Volt 20 Outlet NA/JP Basic Power Distribution Unit
HP 4.9kVA 208 Volt 30 Outlet NA/JP Basic Power Distribution Unit
HP 8.3kVA 208 Volt 36 Outlet NA/JP Basic Power Distribution Unit
HP 8.6kVA 208 Volt Three Phase 18 Outlet NA/JP Basic Power Distribution Unit
HP 8.6kVA 208 Volt Three Phase 30 Outlet NA/JP Basic Power Distribution Unit
HP 5.7kVA 208 Volt Three Phase 27 Outlet NA/JP Dual Voltage Basic Power Distribution
Unit
HP 8.6kVA 208 Volt Three Phase 30 Outlet NA/JP Dual Voltage Basic Power Distribution
Unit
HP 7.3kVA 230 Volt 20 Outlet INTL Basic Power Distribution Unit
HP 7.3kVA 230 Volt 30 Outlet INTL Basic Power Distribution Unit
HP 11kVA 230 Volt 36 Outlet INTL Basic Power Distribution Unit
HP 11kVA 400 Volt Three Phase 30 Outlet INTL Basic Power Distribution Unit
HP Hardwired 200-240 Volt 36 Outlet WW Basic Power Distribution Unit
HP 13.2kVA 480 Volt Three Phase 15 Outlet NA Basic Power Distribution Unit
HP 277 Volt options for H3X07A and H3X08A
H5M55A
H5M56A
H5M57A
H5M58A
H5M59A
H5M60A
H5M61A
H5M62A
H5M63A
DA - 14736 Worldwide — Version 1 — December 9, 2013
H5M64A
H5M68A
H5M70A
H5M71A
H5M72A
H5M75A
H3X07A
Page 18
QuickSpecs
HP ProLiant m300 Server Cartridge
Additional Options
HP 800VA - 277V Input / 230V Output NA Rack Mount Transformer
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14557_div/14557_div.html
(Worldwide)
NOTE: Additional HP Power Distribution Units are available. For a complete list of all HP
PDUs and additional information please visit: www.hp.com/go/rackandpower.
HP Remote Monitored
HP 2.8kVA 120 Volt 12 Outlet NA/JP Monitored Power Distribution Unit
Power Distribution Units HP 3.6kVA 200-240 Volt 12 Outlet WW Monitored Power Distribution Unit
HP 4.9kVA 208 Volt 12 Outlet NA/JP Monitored Power Distribution Unit
HP 3.6kVA 200-240 Volt 16 Outlet WW Monitored Power Distribution Unit
HP 4.9kVA 208 Volt 24 Outlet NA/JP Monitored Power Distribution Unit
HP 7.3kVA 230 Volt 24 Outlet INTL Monitored Power Distribution Unit
HP 7.3kVA 230 Volt 36 Outlet INTL Monitored Power Distribution Unit
HP 8.3kVA 208 Volt 33 Outlet NA Monitored Power Distribution Unit
HP 5.7kVA 208 Volt Three Phase 21 Outlet NA/JP Dual Voltage Monitored Power
Distribution Unit
HP 8.6kVA 208 Volt Three Phase 24 Outlet NA/JP Dual Voltage Monitored Power
Distribution Unit
HP 8.6kVA 208 Volt Three Phase 21 Outlet NA/JP Monitored Power Distribution Unit
HP 11kVA 400 Volt Three Phase 21 Outlet INTL Monitored Power Distribution Unit
HP 11kVA 400 Volt Three Phase 33 Outlet INTL Monitored Power Distribution Unit
HP 14.4kVA 208 Volt Three Phase 24 Outlet NA Monitored Power Distribution Unit
HP 16.6kVA 400 Volt Three Phase 24 Outlet NA Monitored Power Distribution Unit
HP 16.6kVA 400 Volt Three Phase 33 Outlet NA Monitored Power Distribution Unit
HP 17.3kVA 208 Volt Three Phase 24 Outlet NA/JP Monitored Power Distribution Unit
HP 17.3kVA 208 Volt Three Phase 27 Outlet NA/JP Monitored Power Distribution Unit
HP 19.9kVA 480 Volt Three Phase 30 Outlet NA Monitored Power Distribution Unit
HP 22kVA 400 Volt Three Phase 24 Outlet INTL Monitored Power Distribution Unit
HP 22kVA 400 Volt Three Phase 33 Outlet INTL Monitored Power Distribution Unit
DA - 14736 Worldwide — Version 1 — December 9, 2013
H3X09A
D9N43A
D9N46A
D9N44A
D9N45A
D9N47A
D9N48A
D9N50A
D9N49A
D9N52A
D9N53A
D9N51A
D9N55A
D9N57A
D9N58A
D9N62A
D9N61A
D9N59A
D9N54A
D9N63A
D9N60A
D9N56A
Page 19
QuickSpecs
HP ProLiant m300 Server Cartridge
Technical Specifications
HP Moonshot System
HP Moonshot System contains forty-five,(45) server cartridges, one (1) 500GB HDD, one (1) 32GB Memory
DIMM, Two (2) Power Supplies One (1) Switch Module Kit and One (1) Uplink Module Kit.
HP Moonshot 1500
7.47 x 17.45 x 35.34in (18.96 x 44.33 x 89.97cm)
NOTE: Rack chosen is required to have 1200mm to provide space for cable
Chassis Dimensions
management arm at the rear of the chassis and host PDU in the rear of the
(H x W x D)
rack.)
Weight
Maximum
180 lbs.
(all server cartridges,
(approximate)
power supplies, one switch
and one uplink installed)
Typical Power
1311W
Max Power
2496W
Network Ports (per switch Forty-five (45) 10/100/1000 downlink ports
Six (6) 10Gb SFP+ uplink ports
& uplink pair)
Input Requirements
(per power supply)
Power Specifications
NOTE: See the HP Moonshot-45G Switch Module QuickSpecs for Technical
Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/14732_div/
14732_div.html
NOTE: See the HP Moonshot-6SFP Uplink Module QuickSpecs for Technical
Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/14734_div/
14734_div.html
Rated Line Voltage
Rated Input Current
Rated Input Frequency
180 to 264 VAC
8.4A at 200VAC
7.0A at 240VAC
Rated Input Power
47 to 63 Hz
To review typical system power ratings use the HP Power Advisor which is
available via the online tool located at URL:
www.hp.com/go/hppoweradvisor
Power Supply Output (per Rated Steady-State Power 1661W at 200VAC
1649W at 240VAC
power supply)
Maximum Peak Power
1500W (Max) @ 200VAC
1500W (Max) @ 240VAC
System Inlet
Operating
50° to 95° F (10° to 35° C) at sea level with an
altitude derating of 1.8°F per every 1000 ft (1.0°C
Temperature
per every 304.8 m) above sea level to a maximum
of 10,000 ft (3048 m), no direct sustained
sunlight. Maximum rate of change is 18°F/hr
(10°C/hr). The upper limit may be limited by the
type and number of options installed.
System performance may be reduced if operating
with a fan fault or above 86°F (30°C).
DA - 14736 Worldwide — Version 1 — December 9, 2013
Page 20
QuickSpecs
HP ProLiant m300 Server Cartridge
Technical Specifications
Non-operating
Relative Humidity
(non-condensing)
Operating
Non-operating
Altitude
Operating
-22° to 140° F (-30° to 60° C)
Maximum rate of change is 36°F/hr (20°C/hr).
10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, noncondensing.
5 to 95% relative humidity (Rh), 38.7°C (101.7°F)
maximum wet bulb temperature, noncondensing.
10,000 ft (3048 m). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 1500
ft/min (457 m/min).
Non-operating
Acoustic Noise
30,000 ft (9144 m). Maximum allowable altitude
change rate is 1500 ft/min (457 m/min).
Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when
the product is operating in a 23°C ambient environment. Noise emissions were
measured in accordance with ISO 7779 (ECMA 74) and declared in accordance
with ISO 9296 (ECMA 109).
Idle
L WAd
7.1 Bels
L pAm
54 dB
L WAd
7.3 Bels
L pAm
57 dB
Operating
Server Cartridge
Emissions Classification
(EMC)
FCC Rating
Class A
HP Moonshot m300
Server Cartridge
Dimensions
(H x W x D)
6.57 x 7.23 x 0.78in (16.71 x 18.37 x 1.98cm)
Typical Power
27.5W
Max Power
44.0W
Normative Standards
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15;
ICES-003; CNS13438; K22;K24; EN 61000-3-2; EN
61000-3-3; EN 60950-1; IEC 60950-1
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family of
products is eligible to bear the appropriate compliance logos and statements.
DA - 14736 Worldwide — Version 1 — December 9, 2013
Page 21
QuickSpecs
HP ProLiant m300 Server Cartridge
Technical Specifications
Environment-friendly
Products and Approach
End-of-life Management Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
and Recycling
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may be
used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2013 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are
trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 14736 Worldwide — Version 1 — December 9, 2013
Page 22
Download PDF
Similar pages