010-ELV-105
Tech Support: (844) 378-8143
technicalservice@apexproductgroup.com
3 POSITION SWITCH WITH INTEGRATED KILL
WIRING TIPS
WIRE COLOR KEY:
GREEN
YELLOW
BLUE
RED
WHITE BLACK -
ON on LOW - OFF on HIGH
OFF on LOW - ON on HIGH
ON on LOW - ON on HIGH
12 VOLTS INPUT (POWER)
KILL SWITCH POWER
KILL SWITCH GROUND
HOW TO:
1) Enable Kill Switch:
Remove old kill switch and splice to those wires. Otherwise, tap
White wire into power wire running between the CDI and ignition
coil and hook Black wire to frame ground (or negative terminal on
battery).
2) Run lights on “Low”, and Grip Heaters on “High”:
Hook the light’s power wire to Blue and ground wire to frame. Hook
grip heater power wires to Yellow and ground wires to frame.
3) Run grip heaters on “Low’”, and lights/grip heaters on “High”:
Hook grip heater power wires to Blue and ground wires to frame.
Hook light’s power wire to Yellow and ground wire to frame.
4) Run more than one light:
To wire two lights to turn on and off together, Y-crimp the wires
together and hook them up as described above.
Use a Trail Tech Crimp Kit for a Professional Installation. P/N: HT230C
Download PDF
Similar pages