This addendum accompanies your equipment documentation and is additional
information concerning the heart rate features for your equipment and console.
Important
The heart rate features are intended for reference only. They may not be accurate
for every user or at every speed and are not intended for use as a medical device.
Holding the heart rate handle touch sensor while exercising at higher intensity
may also decrease accuracy of the heart rate reading and is not recommended.
Please also read your product documentation and visit:
www.precor.com/en-us/customer-service/faq.
P/N 305324-101 rev A, ENU
©Precor Incorporated | October 2017
Operating and Maintaining
the P80 Console
Precor Incorporated
20031 142nd Avenue NE
P.O. Box 7202
Woodinville, WA USA 98072-4002
P80 OMG 301407-301 rev F, en
March 2012
Edition Information
OPERATING AND MAINTAINING THE P80 CONSOLE
P/N 301407-301 rev F
Copyright © March 2012 Precor Incorporated. All rights
reserved. Specifications subject to change without notice.
Trademark Note
Precor, AMT, and EFX are registered trademarks and Preva is
a trademark of Precor Incorporated. Other names in this
document may be the trademarks or registered trademarks of
their respective owners.
iPod® is a trademark of Apple Inc., registered in the U.S. and
other countries.
Made for iPod® means that an electronic accessory has been
designed to connect specifically to iPod and has been certified
by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards. Please note
that the use of this accessory with iPod may affect wireless
performance.
Made for iPod touch® (1st, 2nd, 3rd, and 4th generation), and
iPod nano® (2nd, 3rd, 4th, 5th, and 6th generation).
Manufactured under license from Dolby Laboratories. Dolby
and the double-D symbol are trademarks of Dolby
Laboratories.
Intellectual Property Notice
All rights, title, and interests in and to the software of the
Preva Business Suite, the accompanying printed materials,
any copies of such software, and all data collected via the
Preva Business Suite, are exclusively owned by Precor or its
suppliers, as the case may be.
Precor is widely recognized for its innovative, award-winning
designs of exercise equipment. Precor aggressively seeks U.S.
and foreign patents for both the mechanical construction and
the visual aspects of its product design. Any party
contemplating the use of Precor product designs is hereby
forewarned that Precor considers the unauthorized
appropriation of its proprietary rights to be a very serious
matter. Precor will vigorously pursue all unauthorized
appropriation of its proprietary rights.
Precor Incorporated
20031 142nd Ave NE, P.O. Box 7202
Woodinville, WA 98072-4002
1-800-347-4404
http://www.precor.com
Important Safety Instructions
Important: Save these instructions for future reference.
Read all instructions in the documentation provided with your
exercise equipment, including all assembly guides, user
guides, and owner’s manuals, before installation of this
device.
Note: This product is intended for commercial use.
The display apparatus (hereinafter referred to as the console)
is intended to be shipped with new Precor exercise equipment
(hereinafter referred to as the base unit). It is not packaged for
individual sale.
WARNING
To prevent injury, the console must be
attached securely to the base unit following all
assembly and installation instructions shipped
with the base unit. The console is intended to
be connected to AC mains power through the
furnished power supply ONLY. It should be
powered on only when installed as described
in the assembly and installation instructions
shipped with the base unit. The console is
intended for use only with Precor fitness
equipment, not as a standalone device.
Safety Precautions
Always follow basic safety precautions when using this
equipment to reduce the chance of injury, fire, or damage.
Other sections in this manual provide more details of safety
features. Be sure to read these sections and observe all safety
notices. These precautions include the following:

Read all instructions in this guide before installing and
using the equipment and follow any labels on the
equipment.
6
Operating and Maintaining the P80 Console










Make sure all users see a physician for a complete
physical examination before they begin any fitness
program, particularly if they have high blood pressure,
high cholesterol or heart disease; have a family history of
any of the preceding conditions; are over the age of 45;
smoke; are obese; have not exercised regularly in the past
year; or are taking any medication.
French equivalent of the above notice, for Canadian
markets: Il est conseillé de subir un examen médical complet
avant d’entreprendre tout programme d’exercise. Si vous avez
des étourdissements ou des faiblesses, arrêtez les exercices
immédiatement.
Do not allow children, or people unfamiliar with the
operation of this equipment, on or near it. Do not leave
children unsupervised around the equipment.
Make sure all users wear proper exercise clothing and
shoes for their workouts and avoid loose or dangling
clothing. Users should not wear shoes with heels or
leather soles, and they should check the soles of their
shoes to remove any dirt and embedded stones. They
should also tie long hair back.
Never leave the equipment unattended when it is plugged
in. Unplug the equipment from its power source when it is
not in use, before cleaning it, and before providing
authorized service.
Note: The optional power adapter is considered a power
source for self-powered equipment.
Use the power adapter provided with the equipment. Plug
the power adapter into an appropriate, grounded power
outlet as marked on the equipment.
Care should be taken when mounting or dismounting the
equipment.
For Treadmills: Do not use typing or web surfing features
while walking at speeds that exceed a slow and relaxed
leisurely pace. Always stabilize yourself by holding a
stationary handle bar while using typing or web surfing
features.
For AMT and EFX: Always stabilize yourself by holding a
stationary handle bar while using typing or web surfing
features.
Read, understand, and test the emergency stop
procedures before use.
Keep the power cord or optional power adapter and plug
away from heated surfaces.
Important Safety Instructions









7
Route power cables so that they are not walked on,
pinched, or damaged by items placed upon or against
them, including the equipment itself.
Ensure the equipment has adequate ventilation. Do not
place anything on top of or over the equipment. Do not
use on a cushioned surface that could block the
ventilation opening.
Assemble and operate the equipment on a solid, level
surface.
Proper Location for Equipment
 For all equipment other than treadmills: Locate at
least 40 inches (1 meter) away from walls or
furniture on either side of the equipment, and 40
inches (1 meter) away from objects behind the
equipment.
 For treadmills: Locate at least 40 inches (1 meter)
away from walls or furniture on either side of the
treadmill, and at least 80 inches (2 meters) away
from objects behind the treadmill.
Important: These location standards should also be used
when positioning equipment away from sources of heat, such
as radiators, heat registers, and stoves. Avoid temperature
extremes.
Keep equipment away from water and moisture. Avoid
dropping anything on or spilling anything inside the
equipment to prevent electric shock or damage to the
electronics.
When using the treadmill, always attach the safety clip to
your clothing before beginning your workout. Failure to
use the safety clip may pose a greater risk of injury in the
event of a fall.
Keep in mind that heart rate monitors are not medical
devices. Various factors, including the user’s movement,
may affect the accuracy of the heart rate readings. The
heart rate monitors are intended only as exercise aids in
determining heart rate trends in general.
Do not operate electrically powered equipment in damp
or wet locations.
Never operate this equipment if it has a damaged cord or
plug, if it is not working properly, or if it has been dropped,
damaged, or exposed to water. Call for service
immediately if any of these conditions exist.
8
Operating and Maintaining the P80 Console










Maintain the equipment to keep it in good working
condition, as described in the Maintenance section of the
owner’s manual. Inspect the equipment for incorrect,
worn, or loose components, and then correct, replace or
tighten prior to use.
If you plan to move the equipment, obtain help and use
proper lifting techniques.
Equipment Weight Restrictions: Do not use the treadmill
if you weigh more than 500 pounds (225 kg). If you weigh
more than 350 pounds (160 kg), do not run on the
treadmill. For all other fitness equipment, the weight limit
is 350 pounds (160 kg).
Use the equipment only for its intended purpose as
described in this manual. Do not use accessory
attachments that are not recommended by Precor. Such
attachments may cause injuries.
Do not operate the equipment where aerosol (spray)
products are being used or where oxygen is being
administered.
Do not use outdoors.
Do not attempt to service the equipment yourself, except
to follow the maintenance instructions in the owner’s
manual.
Never drop or insert objects into any opening. Keep hands
away from moving parts.
Do not set anything on the stationary handrails,
handlebars, control console, or covers. Place liquids,
magazines, and books in the appropriate receptacles.
Do not lean on or pull on the console at any time.
CAUTION: DO NOT remove the cover, or you may risk injury due
to electric shock. Read the assembly and maintenance guide
before operating. There are no user-serviceable parts inside.
Contact Customer Support if the equipment needs servicing. For
use with single phase AC power only.
Important Safety Instructions
9
Hazardous Materials and Proper Disposal
The batteries within self-powered equipment contain
materials that are considered hazardous to the environment.
Federal law requires proper disposal of these batteries.
If you plan to dispose of your equipment, contact Precor
Commercial Products Customer Support for information
regarding battery removal. Refer to Obtaining Service.
Product Recycling and Disposal
This equipment must be recycled or discarded according to
applicable local and national regulations.
Product labels, in accordance with European Directive
2002/96/EC concerning waste electrical and electronic
equipment (WEEE), determine the framework for the return
and recycling of used equipment as applicable throughout the
European Union. The WEEE label indicates that the product is
not to be thrown away, but rather reclaimed upon end of life
per this Directive.
In accordance with the European WEEE Directive, electrical
and electronic equipment (EEE) is to be collected separately
and to be reused, recycled, or recovered at end of life. Users
of EEE with the WEEE label per Annex IV of the WEEE
Directive must not dispose of end of life EEE as unsorted
municipal waste, but use the collection framework available
to customers for the return, recycling, and recovery of WEEE.
Customer participation is important to minimize any potential
effects of EEE on the environment and human health due to
the potential presence of hazardous substances in EEE. For
proper collection and treatment, refer to Obtaining Service.
Regulatory Notices for the RFID Module
When equipped with a control console as described in this
document, this equipment may include a radio-frequency
identification (RFID) module. The RFID module has been
certified to operate at temperatures between -20°C and 85°C
(-4°F and 185°F).
Radio Frequency Interference (RFI)
The RFID module conforms to the following national
standards defining acceptable limits for radio frequency
interference (RFI).
10
Operating and Maintaining the P80 Console
Federal Communications Commission, Part 15
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a commercial
installation. The equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the owner’s manual instructions, can cause
harmful interference to radio communications.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
WARNING
Per FCC rules, changes or modifications not
expressly approved by the manufacturer could
void the user’s authority to operate the
equipment.
Industry Canada
This device complies with RSS-210:2007 of the Spectrum
Management & Telecommunications Radio Standards
Specification. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation.
This Class A digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada.
ATTENTION: Haute Tension
Débranchez avant de réparer
European Applications
CE compliance is claimed to the following directives:



1999/5/EC R&TTE Directive
2006/95/EC LVD Directive
2002/95/EC RoHS Directive
Important Safety Instructions
11
Directive compliance has been verified to the following
standards:






EN 55022
EN 300 330-1 V1.5.1
EN 300 330-2 V1.3.1
EN 301 489-3 V1.4.1
EN 301 489-1 V1.8.1
EN 60950-1
Regulatory Notices for Cardiovascular
Exercise Equipment
The regulatory information in this section applies to the
exercise equipment and its control console.
Safety Approvals for Cardiovascular Equipment
Precor equipment has been tested and found to comply with
the following applicable safety standards.
Cardiovascular Type Equipment:
 CAN/CSA, IEC, EN 60335-1 (Household and similar

electrical appliances - Safety)
EN 957 (Stationary training equipment, class S/B
compliant equipment)
PVS and P80 Regulatory Notice
This Precor equipment has been tested and found to comply
with the following applicable safety standards.

CAN/CSA, UL, IEC, EN 60065 (Audio, video and similar
electronic apparatus - Safety)
Radio Frequency Interference (RFI)
This Precor exercise equipment conforms to the following
national standards defining acceptable limits for radio
frequency interference (RFI).
12
Operating and Maintaining the P80 Console
Federal Communications Commission, Part 15
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a commercial
installation. The equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the owner’s manual instructions, may cause
harmful interference to radio communications.
WARNING
Per FCC rules, changes or modifications not
expressly approved by Precor could void the
user’s authority to operate the equipment.
Industry Canada
This Class A digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada.
ATTENTION: Haute Tension
Débranchez avant de réparer
European Applications
CE compliance is claimed to the following directives:
2004/108/EC EMC Directive
2006/95/EC LVD Directive
2002/95/EC RoHS Directive
Directive compliance has been verified to the following
standards:







EN 55022
EN 55024
EN 60335-1
EN 60065 (P80 and PVS)
Important Safety Instructions
13
Electrical Recommendations: 120 V and 240
V Treadmills
Note: This is a recommendation only. NEC (National Electric
Code) guidelines or local region electric codes must be
followed.
You should have received a power cable that meets your local
electrical code requirements along with the equipment.
Precor treadmills must be connected to a 20 amp individual
branch circuit that can be shared only with one PVS. If you
need additional help with the power connections contact your
Precor authorized dealer.
Important: An individual branch circuit provides a hot conductor
and neutral conductor to a receptacle. The conductors must not be
looped, "daisy-chained", or connected to any other conductors.
The circuit must be grounded according to NEC guidelines or local
region electric codes.
Figure 1: North American 120-volt, 20-amp power receptacle
Figure 2: North American 240-volt, 20-amp power receptacle
14
Operating and Maintaining the P80 Console
Electrical Recommendations: All Equipment
Excluding Treadmills
Note: This is a recommendation only. NEC (National Electric
Code) guidelines or local region electric codes must be
followed.
For equipment fitted with a P80 console or Personal Viewing
System (PVS) screen a separate power connection is
required. For a 20 amp branch circuit up to 10 screens can be
connected. If the branch circuit has any other devices plugged
into the circuit the number of screens must be reduced by the
wattage of the other devices.
Note: The typical splitter power cords that have IEC-320 C13
and C14 plugs have a recommended maximum capacity of
five screens.
Figure 3: IEC-320 C13 and C14 plugs
Obtaining Service
Do not attempt to service the equipment except for
maintenance tasks. If any items are missing, contact your
dealer. For more information regarding customer support
numbers or a list of Precor authorized service centers, visit
the Precor web site at http://www.precor.com.
Table of Contents
Important Safety Instructions ................................................... 5
Safety Precautions ................................................................................ 5
Hazardous Materials and Proper Disposal .................................... 8
Product Recycling and Disposal ....................................................... 9
Regulatory Notices for the RFID Module ....................................... 9
Regulatory Notices for Cardiovascular
Exercise Equipment ......................................................................11
Electrical Recommendations: 120 V and
240 V Treadmills ......................................................................... 12
Electrical Recommendations: All Equipment
Excluding Treadmills ...................................................................14
Obtaining Service.................................................................................14
Getting Started .........................................................................17
Identifying Parts of the Console.......................................................18
Using the Treadmill Safety Clip .......................................................18
Treadmill Auto Stop™ (Automatic Stop) Function ...................20
Configuring the System Settings............................................. 23
About ..................................................................................................... 24
Equipment Usage ................................................................................ 26
System Settings ................................................................................... 27
Introducing Users to the P80 Console .................................... 37
Changing the Default Language...................................................... 37
Using the Touch Heart Rate Feature ............................................. 38
Using a Chest Strap Transmitter .................................................... 39
Using the View Channels and View Buttons.............................. 40
Using the Media Panel ...................................................................... 42
Using the Workout Progress Panel ................................................ 43
Using the Preva Net Icon .................................................................. 45
16
Operating and Maintaining the P80 Console
Beginning Your Workout ......................................................... 47
Starting a QuickStart™ Workout ................................................... 47
Starting a Featured Workout .......................................................... 47
Starting a Preset Workout ............................................................... 48
Ending a Workout .............................................................................. 49
Maintenance ............................................................................ 55
Cleaning the Console and Display ..................................................55
Changing the Belt (Newer Model AMT Only) ........................... 56
Chapter
1
Getting Started
The P80 console offers administrators and users the ability to
set default settings that meet their specific needs. To
accomplish this, the console supports settings for different
classes of users depending on their administrative rights.
A guest user exercises on a piece of equipment without
signing in or creating a user profile.
 A registered user uses a sign-in password or Preva™
Pass and creates a user profile.
 A registered service technician uses a sign-in password
or Preva™ Pass with extra permissions to administer
console settings.
 An administrator is always registered, uses a sign-in
password or Preva™ Pass, and has full access to the
console settings.
Changes to the Personal Information and Preference settings
are saved to a registered user’s profile. An unregistered user
can change preference settings; however, because they lack a
user profile, those changes are not saved, and apply only to
their current workout.

18
Operating and Maintaining the P80 Console
Identifying Parts of the Console
The following figure provides information about the console
keys. The number and actions of the console keys may differ
slightly depending on the type of equipment.
Figure 4: P80 console keys
Table 1. Key descriptions for the P80 console
Number Key Name
Detail
Pause
Stop the equipment
Incline/CrossRamp®
Indicator
Appears on treadmill, elliptical,
TM
and AMT with Open Stride
Intensity Indicator
Also called Speed or Resistance
indicator depending on
equipment type
Volume Up/Down
Increase or decrease volume
Channel Up/Down
Change TV channel
Mute
Turn the volume on or off
19
Getting Started
Using the Treadmill Safety Clip
The treadmill is equipped with two different stop functions,
which behave as follows:
If the user …
Then the
treadmill belt …
And the console …
Presses down on the red Slows to a stop
STOP button
Shows that the exercise
workout is paused
Pulls on the lanyard
Slows to a stop
attached to the safety
clip and trips the restart
switch
Shows the words PUSH
TO RESET SWITCH
and an arrow pointing
to the Restart switch
The restart switch is located just below the console and
immediately behind the red STOP button, as shown in the
following figure. When it is tripped, the bar pops up,
displaying the words PUSH TO RESET SWITCH on its front
side. The treadmill does not operate while these words are
visible.
Figure 5: Restart switch
Instruct users on how important it is to use the safety clip
while exercising on the treadmill, and demonstrate how they
should attach it to their clothing near the waistline.
20
Operating and Maintaining the P80 Console
If the restart switch trips during exercise, perform the
following steps:
1. Reattach the safety clip if necessary.
2. Press the restart switch down until it clicks, returning it to
its normal position.
Note: If the restart switch trips, all information about the
current workout is deleted.
3. Start the workout from the beginning, reducing the time
as needed to account for the amount of exercise that has
been completed.
Figure 6: Attaching the safety clip
21
Getting Started
Treadmill Auto Stop™ (Automatic Stop)
Function
Important: The default setting for this feature is ON. An
administrator can turn off this feature in the System Settings;
however, Precor recommends it remain ON.
The Auto Stop™ (Automatic Stop) feature is designed to
bring the treadmill to a gradual stop when it is not in use. This
might occur if a user steps off the treadmill before the end of
a workout and leaves the treadmill running.
Sixty seconds after a treadmill workout starts or resumes, the
equipment begins Auto Stop monitoring. If a user is detected,
then no message appears, and the selected workout
continues.
If no user is detected after an additional 30 seconds, the
console displays the message NO USER DETECTED,
STOPPING IN 10 SECONDS as notification of the pending
stop. During the display of this message, a ten second
countdown begins. If a user does not override the countdown,
the belt comes to a gradual stop after the countdown is
complete.
Note: Users weighing more than 90 pounds (41 kg) are
detected within the speed and position limits of the feature.
Users weighing 50 pounds (22.7 kg) to 89 pounds (40.5 kg)
may not be detected depending on their speed and location.
Always be aware of and follow the console’s instructions for
proper operation.
22
Operating and Maintaining the P80 Console
Chapter
2
Configuring the System
Settings
Use the System mode to configure settings in ways that
benefit your users and your facility. The System menu is
visible only to administrators and registered service
technicians. Changes made to these settings are saved to the
fitness equipment.
Important: A special code is required to access these settings. Do
not share this code with anyone except those authorized to
change system settings.
The System menu contains the following settings:



About
Equipment Usage
System Settings
24
Operating and Maintaining the P80 Console
To view the System menu:
1. On the Welcome screen, press and hold Pause.
Figure 7: Pause key
2. While holding Pause, press each of the following keys
once in the order presented. Referring to the diagram
below, press:
1234
Channel Up
Volume Down
Volume Up
Channel Down
Figure 8: Settings security code
3. Release Pause.
4. Using the number pad on the screen, touch the following
numbers to enter the password:
5651565
5. Touch OK.
25
Configuring the System Settings
About
System information settings provide basic information
including equipment models and serial numbers. Most of
these settings are for informational purposes only and cannot
be modified.
To view the System Info settings menu:
1. Use the administrator code and password to view the
equipment settings.
2. Touch About.
Table 2. About settings
Setting
Access
Detail
Event Log
Admin/Tech:
View
Provides a list of the most recent
hardware and software events,
and equipment status. If no
events have occurred since the
last time the event log was
cleared, the event log screen will
be empty.
Event Count
Admin/Tech:
View
Number of events recorded by
equipment.
Console Serial Admin/Tech:
Number
View
Stored in the console’s memory.
Lower Serial
Number
Admin/Tech:
View
Stored in the console’s memory.
Location
Admin/Tech:
View
Modify
Entered on console at time of
registration.
Release
Bundle
Version
Admin/Tech:
View
Shows current version and a list
of past software updates.
Automatically updates as part of
each software upgrade.
ETag Check
Interval
Only Precor
Stored in the console’s memory.
service
technicians can
modify this
setting.
26
Operating and Maintaining the P80 Console
Setting
Access
Detail
Heartbeat
Interval
Only Precor
Determines how often the
service
console communicates with the
technicians can server.
modify this
setting.
Minimum
Heartbeat
Interval
Only Precor
Minimum number of times that
service
the console communicates with
technicians can the server in a given time period.
modify this
setting.
Maximum
Heartbeat
Interval
Only Precor
Maximum number of times that
service
the console communicates with
technicians can the server in a given time period.
modify this
setting.
Mfe MAC
Address
Admin/Tech:
View
Stored in the console’s memory.
Network Time Only Precor
Server 1
service
technicians can
modify this
setting.
Network Time Only Precor
Server 2
service
technicians can
modify this
setting.
Network Time Only Precor
Server 3
service
technicians can
modify this
setting.
Machine Type Admin/Tech:
View
Type of equipment.
27
Configuring the System Settings
Equipment Usage
The Equipment Usage settings provide information on
individual usage as well as cumulative equipment usage. This
information and these settings are accessible only to
administrators and registered service technicians.
To view the Usage settings:
1. Use the administrator code and password to view the
equipment settings.
2. Touch Equipment Usage.
Table 3. Equipment Usage settings
Setting
Access
Cumulative
Workout
Seconds
Admin/Tech: Total number of seconds. Seconds
View
are counted when the workout
clock starts.
Cumulative
Workout
Distance
Admin/Tech: •
View
Treadmills will report miles of
use
•
AMTs will report a "horizontal
distance" miles or strides
depending on equipment
model
•
Ellipticals will convert total
strides to miles
•
Bikes will convert total
revolutions to miles
Cumulative
Workout
Sessions
Detail
Admin/Tech: Total number of sessions. A
View
session is counted if the summary
screen displays.
Last Workout
Admin/Tech: The date of the start of the last
Start Date Time View
workout.
Last Workout
End Date Time
Admin/Tech: The date of the end of the last
View
workout.
28
Operating and Maintaining the P80 Console
System Settings
Use the System Settings to test your equipment and set
parameters that benefit your users and your facility. The
System Settings menu is visible only to administrators and
registered service technicians.
The System Settings menu contains the following sections:
Connectivity
Display
TV Settings
Workout Limits
Manage Settings
Precor recommends that you configure the P80 consoles in
your facility by sharing setting files. Configure one P80
console by hand for each type of fitness equipment. For
example, configure one treadmill console, one EFX console,
one AMT console, and so on.





Once you have done this, you can export the settings for that
type of equipment onto a USB drive and then import those
settings into other P80 consoles installed on equipment of
that type.
For more information, refer to Manage Settings.
29
Configuring the System Settings
Connectivity
Configuring your audio, video, and network infrastructure
requires expertise. Precor strongly recommends that you
work with a qualified contractor to set up this infrastructure.
This setting provides the following information





Network Type
Configuration
Status
IP Address
Preva Server
To view connectivity information:
1. Use the administrator code and password to view the
equipment settings.
2. Touch System Settings, then Connectivity.
Table 4. Connectivity settings
Settings
Default
Detail
Network Type Wired
Configuration Automatic Automatic or Manual
Press Network Settings to view the
•
IP Address
•
Netmask
•
Gateway
•
DNS Primary
•
DNS Secondary
Status
Connected or Not Connected
IP Address
Location-specific
Preva Server
URL region-specific
30
Operating and Maintaining the P80 Console
Display
These settings are configurable per console, but can also be
configured using Preva™ Business Suite. The equipment must
be inactive before you can change the display settings. Fitness
equipment is defined as inactive if all of the following
conditions are true:




No registered users have logged in.
The frame parts of the equipment are not moving.
The touch screen has detected no input.
No buttons have been pressed.
To view the Display settings:
1. Use the administrator code and password to view the
equipment settings.
2. Touch System Settings, then Display.
Table 5. Display settings
Setting
Setting Options
Default Value
Default Language
Varies depending on
software version
English
Measurement
Units
US Standard
US Standard
Standby Mode
Delay
•
5 Minutes
•
15 Minutes
•
30 Minutes
•
60 Minutes
Time Zone
Metric
GMT —12
through
15 Minutes
GMT-06 Pacific Time
(US & Canada)
GMT + 12
Internet Browser
Access
Preva
TM
Net Panel
On/Off
Off
On/Off
Off
Configuring the System Settings
31
TV Settings
TV Settings help you set up television channels for your users.
The TV Settings are:







Channel Guide
Region
Default Channel
Skip Unnamed Channels
Extensive Scan
Closed Captioning
Export/Import Channel Names
To view TV Setting information:
1. Use the administrator code and password to view the
equipment settings.
2. Touch System Settings.
3. Touch Display, then Channel Guide.
Channel Configurations
There are two different ways to set up the TV channel
configurations for the P80 console. You can scan for available
channels or add channels manually.
Precor recommends that you set up one P80 console per
equipment type with channel definitions as well as channel
text, and then export those settings to your other P80
consoles. This method ensures that all P80 consoles in your
facility have the same configuration.
To scan for available channels:
1. Touch System Settings.
2. On the System Settings menu, touch TV Settings.
3. Touch Channel Guide, then SCAN.
The console scans available channels, and all available
channels appear on the screen.
Note: If there are analog channels missing from your list,
run an extensive scan to pick up missing channels or
channels with weaker signals.
32
Operating and Maintaining the P80 Console
To run an extensive scan:
1. Touch System Settings.
2. On the System Settings menu, touch TV Settings.
3. Touch Extensive Scan.
Note: This scan may take up to two hours to complete.
To delete a channel from the Channel Guide:
1. On the Channel Guide screen, touch the listing for the
channel you want to delete.
2. Touch the Delete button that appears next to the listing.
3. When asked “Are you sure?", verify that you want to
proceed, then touch Yes.
Table 6. TV Settings
Settings
Detail
Channel Guide
Use to scan basic channels
Region
Select the appropriate region for your United
location.
States
Default Channel
Set a default channel for the
equipment. This is the channel that
will display when the TV is turned on.
Volume
Correction
Default
0
Skip Unnamed
Channels
Use to screen out channels that are
not valid or encrypted.
Off
Extensive Scan
Run to identify analog channels
Off
missed by the basic scan or channels
with weak signals. Takes up to two
hours to complete.
Closed Captioning Select ON if you want closed
captioning to appear on your TV
screen.
Off
Export/Import
Channel Names
Off
Import the channel names once a
basic channel scan is complete.
Configuring the System Settings
33
Editing the Export/Import Channel File
Note: You will need to scan for channels before you can
export the file. If you have not scanned for channels, refer to
Channel Configurations in the preceding section.
Exporting the channel list from the fitness equipment creates
a file called channel-list.ini. This file can be used to specify
channel names in languages that are not yet supported by the
P80 console.
To export this file from your console:
1. Enter your code to view System Settings. To locate your
code, refer to Configuring the System Settings.
2. Insert a USB drive into the console.
3. On the Settings menu, touch System Settings.
4. On the System Settings menu, touch Manage Settings,
then Export to USB.
5. On the System Settings menu, touch TV Settings, then
Export/Import Channel Names.
6. Touch Export to USB. The channel-list.ini file is saved on
your USB drive in the /precor folder.
7. Remove the USB drive from the console and insert it into
your computer.
34
Operating and Maintaining the P80 Console
To edit the file and reload it:
Note: You will need a UTF-8 capable editor program to open
the channel-list.ini file. Such programs are available free on
the internet.
1.
Using the editor, open the channel_list.ini file and edit the
channel names on the right side of the equal sign. Do not
change the information on the left side of the equal sign,
or the equal sign itself.
2. Save the file and close the editor. This prevents read or
write errors to the USB drive.
3. Remove the USB drive from your computer and reinsert it
into the same console you used for your initial export.
4. On the System Settings menu, touch TV Settings, then
Export/Import Channel Names.
5. Touch Import from USB. The updated channel-list.ini file
is loaded and the Chanel Guide displays the updated
channel names.
The updated .ini file and channel configurations can be
exported to a USB drive along with other equipment settings
and uploaded to other P80 consoles mounted on the same
type of fitness equipment.
For more information, refer to Manage Settings.
Workout Limits
The Workout Limit settings give you control over how the
equipment is used. Use these settings to create reasonable
limitations for equipment usage including speed, incline,
resistance, and duration.
In general, fitness equipment use is based on its popularity
with users, and its availability during a site’s busiest times of
day. Settings to enforce time limits will help locations restrict
user usage during the busiest hours to provide more access to
equipment for more users.
Workout Limit settings are not associated with or saved as
part of a user profile and users do not have access to them.
Both administrators and service technicians have view and
modify access rights.
35
Configuring the System Settings
To modify the Workout Limits settings:
1. Use the administrator code and password to view the
equipment settings.
2. Touch System Settings, then Workout Limits.
Table 7. Workout Limits settings
Setting Name
Setting Options
Default
Value
Maximum
Workout
Duration
Use on-screen keypad to enter the
maximum workout duration allowed
on this fitness equipment
60
minutes
Maximum Pause •
Summary Time
Out
Resistance
Range
Speed Limit
1 second
•
5 seconds
•
15 seconds
•
30 seconds
•
60 seconds
•
120 seconds
•
300 seconds
•
No Time Out
•
30 seconds
•
60 seconds
•
120 seconds
•
Low
•
Medium
•
High
30
seconds
60
seconds
Medium
1-16 mph
16 mph
Incline Limit
(Treadmill)
0.5-15
15
Autostop
•
On
•
Off
(Treadmill)
(Incline range is -3 to 15)
On
36
Operating and Maintaining the P80 Console
Manage Settings
Use the Manage Settings feature to save your personalized
equipment settings to a USB drive, or to import new software
updates from a USB drive.
Precor recommends that you configure the P80 consoles in
your facility by sharing setting files. The easiest way to do this
is to configure one P80 console by hand for each type of
fitness equipment. For example, configure one treadmill
console, one EFX console, one AMT console, and so on.
When your configuration is complete, export the settings file
from the hand-configured console and then import this
settings file to all P80 consoles installed on similar equipment
types.
To save your equipment settings to a USB drive:
1. Insert a USB drive into the console.
2. On the System Settings menu, touch Manage Settings,
then Export to USB.
3. Touch OK to accept the export.
Note: This procedure exports the updated channel-list.ini file
as well as the larger file containing equipment settings,
network settings, and channel frequencies.
Once you have exported these settings, remove your USB
drive from the console, and insert it into P80 consoles
installed on similar equipment types to upload your
personalized settings.
To import equipment settings from a USB drive:
1. Insert a USB drive loaded with your personalized settings
into the console.
2. On the System Settings menu, touch Manage Settings,
then Import from USB.
3. Touch OK to accept the import.
Chapter
3
Introducing Users to the P80
Console
The P80 console offers clear visuals and a touch-screen
layout that encourages program exploration. Multiple preset
workouts are designed to help individual users meet their
fitness goals, and the console keys and durable motion
controls are responsive and easy to use.
Important: Please review the following sections in this guide with
your users before allowing them to use the fitness equipment:



Important Safety Instructions
Using the Safety Clip (for treadmill only)
Educating Users
38
Operating and Maintaining the P80 Console
Changing the Default Language
The Welcome screen displays in a default language selected
for your region.
To change the default language before beginning your
workout:
1. On the Welcome screen, touch the language icon.
Figure 9: Language icon
2. On the Language screen, select your language choice and
touch OK.
The screens will now display in your preferred language.
Using the Touch Heart Rate Feature
Note: Touch heart rate performance may vary based on a
user’s physiology, fitness level, age, and other factors. You
may experience an erratic readout if your hands are dry, dirty,
or oily, or if the skin on your palms is especially thick. Wearing
hand lotion can also cause an erratic readout. In addition,
make sure that the sensors are clean to ensure proper contact
can be maintained.
To use the touch heart rate feature, place the palm of your
hands directly on the metal heart rate sensors on the
equipment’s handlebars. To ensure an accurate heart rate
readout, make sure you follow these tips:



Both hands must grip the sensors for your heart rate to
register.
It takes a number of consecutive heartbeats (15-20
seconds) for your heart rate to register.
When gripping the sensors, do not grip tightly. Keep a
loose, cupping hold. Holding the grips tightly can affect
the reading.
Introducing Users to the P80 Console


39
As you work out, your perspiration will help transmit your
heart rate signal. If you have difficulty using the handheld
grips to determine your heart rate, try the sensors again
later in the workout to see if you can obtain a heart rate
signal.
If the touch heart rate feature does not work for you,
Precor recommends that you use a chest transmitter
strap.
Figure 10: Heart rate target zones
CAUTION: Your heart rate should never exceed 85% of your
maximum aerobic heart rate. Your maximum heart rate is equal to
220 minus your age.
40
Operating and Maintaining the P80 Console
Using a Chest Strap Transmitter
WARNING Signals used by the Chest Strap Transmitter
(or heart rate strap) may interfere with
pacemakers or other implanted devices.
Consult your physician and the manufacturers
of your Chest Strap Transmitter and
implanted device before using a Chest Strap
Transmitter.
Wearing a chest strap transmitter during your workout
provides steady heart rate information. For the equipment to
detect your heart rate, you must grip the touch heart rate
sensors or wear a chest strap transmitter while exercising. In
the presence of both touch and wireless data, the touch data
takes precedence and will display.
Note: To receive an accurate reading, the strap needs to be in
direct contact with the skin on the lower sternum (just below
the bust line for women).
To use a chest strap transmitter:
1. Carefully dampen the back of the strap with tap water.
Important: Do not use deionized water. It does not have the
proper minerals and salts to conduct electrical impulses.
2. Adjust the strap and fasten it around your chest. The
strap should feel snug, not restrictive.
3. Make sure that the chest strap is right-side-up, lies
horizontally across, and is centered in the middle of your
chest.
4. Test the chest strap placement by checking the heart rate
function on the equipment. If a heart rate is registering,
your chest strap placement is correct. If the equipment
does not register a heart rate, readjust the strap and
recheck the heart rate function.
Introducing Users to the P80 Console
41
Using the View Channels and View Buttons
There are three primary screen views that make certain
information visible during your workout. You can change the
look and information provided on the screen by at anytime
using the Views button.



Workout View – Shows panels, icon bar, and the status
bar. This view allows you to focus fully on your workout.
Status View – Shows only the status bar and icon bar,
leaving the center of the console for media viewing.
Media View – Shows only media and the Views and
Channel buttons. This view allows you to focus on media.
Note: The name of the Channels button changes
depending on the media you are using. For example, if you
are watching a workout guide, the name of the button will
be Videos.
PrevaTM Net Featured View – Shows the Internet content
and provides full Internet browser access.
Changing Screen Views
The Views icon appears at the bottom right of the workout
screen when the Personal Progress panel is visible.
Figure 11: Views icon
To get to this panel:



Press Quick Start.
Press Workouts, select a preset workout, and then press
GO.
Select the Featured Workout on the Welcome screen by
pressing GO.
42
Operating and Maintaining the P80 Console
To change views:
1. The default view is the Workout View. Slide the panels
side to side on the screen to see the media panel.
2. Press Views twice to see the Status view.
3. Press Views a third time to make the Status Bar disappear
leaving only the Media view.
Using the Media Panel
Use the Media panel to select a media source.
To choose a media source:
1. On a Workout Progress panel, touch the Media icon, or
slide the right edge of the next panel across the screen.
Figure 12: Media icon
2. The Media panel describes the current media selection.
Navigate this panel using the buttons to the right of the
box.
Table 8. Media buttons
Button
Action
Previous
Channel
Returns you to the previous media source or TV
channel.
TV Channels
Displays the channel list.
Workout
Guides
Displays a list of tutorial videos.
iPod®
Changes the source to iPod and updates the
Media panel.
Off
Turns off all media.
Introducing Users to the P80 Console
43
Connecting and Using Your iPod®
You can listen to your favorite music and control your iPod
directly from the console.
To connect your iPod:
1. Insert the iPod into the connector at the top of the
console and place your iPod securely in the pocket
provided.
The media panel displays the words Now Playing iPod
along with the name of the song currently playing.
2. Plug your headphones into the console.
Note: Be sure that the headphones are plugged into the
console and not the iPod. If they are plugged into the iPod,
you will not be able to adjust the volume using the
console keys.
3. To pause, touch the pause button.
Figure 13: Track buttons
4. To hear a different song, touch the track buttons.
44
Operating and Maintaining the P80 Console
Using the Workout Progress Panel
Use the Workout Progress panel to customize your workout.
This is the first panel that displays once you select a workout
or press GO. If you are on the Media panel, there are two
ways to return to the Workout Progress panel.
To return to the Workout Progress panel:
1. On the Media panel, touch the Workout icon, or slide the
right edge of the next panel across the screen.
2. The Workout Progress panel describes the current media
selection. There are buttons to the right of the box.
Figure 14: Workout Progress icon
Table 9. Workout Progress buttons
Button
Action
Workouts
Displays a list of goals and preset workouts available
on that equipment.
Duration
Set the length of your workout.
Personal
Info
Enter your age and weight.
Target
Choose Distance or Calories as a target for your
workout session.
Maximum distance: 50 miles.
Maximum calories: 5000 calories.
45
Introducing Users to the P80 Console
Using the Preva Net Icon
WARNING For Treadmills: Do not use typing or web
surfing features while walking at speeds that
exceed a slow and relaxed leisurely pace.
Always stabilize yourself by holding a
stationary handle bar while using typing or
web surfing features.
For AMT and EFX: Always stabilize yourself
by holding a stationary handle bar while using
typing or web surfing features.
The PrevaTM Net option provides Internet content and full
Internet browser access. You can enabled or disabled this
function in your facility systems settings.
To open PrevaTM Net:
1. On the Welcome screen, touch Workouts or
QuickStart™ to begin a workout.
Once your workout begins, the PrevaTM Net icon appears
at the bottom of your screen.
2. Touch the PrevaTM Net icon.
Figure 15: Preva Net icon
3. On the PrevaTM Net Featured panel, select one of the
following options:
 Featured Sites - displays feeds of specific interest
during a workout
 All - displays a larger selection of feeds
 Browser - opens a browser window
46
Operating and Maintaining the P80 Console
Chapter
4
Beginning Your Workout
CAUTION: If you are using a treadmill, be sure to attach the
security clip to your clothing before starting your workout.
The P80 console offers many different workout options. The
following sections explain the type of workouts available and
how to get started using them.
Starting a QuickStart™ Workout
The QuickStart workout begins your workout in the Manual
mode. Default calculations, such as calories burned, are based
on a 150 pound (68 kg), 35-year old individual. You can
complete a workout using the default values, or you can
personalize the settings.
To begin exercising immediately:
1. Touch Quick Start.
The words Enjoy Your Workout (or Starting Treadmill
when using the treadmill) appear on the screen and the
Manual workout begins.
Note: For treadmills, the equipment begins a
three-second count down 3, 2, 1, before the belt starts
moving.
2. At any time during a workout, you can press Pause. When
you press it, the workout pauses and you can choose to
Resume or Finish your workout.
If you choose to finish a workout, the Workout Summary
screen displays your workout status for that session.
48
Operating and Maintaining the P80 Console
Starting a Featured Workout
The Featured Workout appears in a panel on the Welcome
Screen. Use Featured Workouts to explore the fitness benefits
of preset programs and to add variety to your workout.
To begin a Featured Workout, touch Go on the Featured
Workout panel.
Starting a Preset Workout
Preset workouts are a great way to tailor your workouts to
your fitness goals, stay challenged, and add variety to your
sessions.
Preset workouts use age and weight to calculate calories and
heart rate targets. You can enter this information at the start
of the workout. If no information is entered, the workout uses
the equipment default settings to calculate workout values.
To begin a preset workout:
1. On the Welcome screen, touch Workouts.
A Workouts screen appears.
2. Each goal heading on the screen can be expanded to view
the workouts available in that goal group. To view
available workouts for a particular goal, touch a workout
heading for that goal.
3. To start a specific workout, touch the workout name, then
touch GO.
The words Enjoy Your Workout appear on the screen and
the Manual workout begins.
Note: For treadmills, the equipment begins a
three-second count down 3, 2, 1, before the belt starts
moving.
4. Anytime during a workout, you can press Pause. When
pressed, the workout pauses and you can choose to
Resume or Finish your workout. To continue your
workout, touch Resume.
If you choose to finish a workout, the Workout Summary
screen displays your workout status for that session.
49
Beginning Your Workout
Table 10. Preset workout descriptions
Goal
Workout Details
Lose Weight
Choose from several courses designed to
encourage weight loss.
Be Fit
Maintain your fitness level so you can stay active
and fit.
Get Toned
Tone your legs. Pick a focus of calf, thigh, or
gluteal region.
Push
Performance
Choose a high-intensity interval or work on
distance training.
Test Your
Fitness
Test your fitness level based on your age and
weight.
Ending a Workout
To end your workout, press Pause, and then Finish. A
summary screen for your current workout appears. The
measurements include:





Distance
Calories
Duration
Average movement rate/min (or the appropriate measure
based on equipment type)
Average Heart Rate
Personal Information and Progress Settings
Before you begin the fitness tests or the heart rate program,
you are prompted to enter personal information in the
Workout Progress panel. This information may include age,
weight, or a length of time for that workout session. The
equipment uses this information to compute your energy
expenditure during that workout if you are tracking status
such as calories or watts.
To enter your personal settings:
1. Begin exercising by touching Quick Start™ or selecting
Workout.
A Workout Progress panel appears on the screen.
2. In the panel, touch Duration to enter how much time you
want to exercise.
3. In the panel, touch Personal Info to enter your age and
weight.
50
Operating and Maintaining the P80 Console
Table 11. Examples of Personal Information settings
Setting Setting Options
Default Access
Value
Age
35
Admin/Tech: Enter age as a
value or a
None
range.
170
Admin/Tech: Enter weight
as a value or
None
a range.
•
Over 85
•
75 - 84
•
65 - 74
•
55 - 64
•
45 - 54
•
36 - 44
•
35
•
25 - 34
•
18 - 24
•
Under 18
Weight •
Over 310
•
290 - 309
•
270 - 289
•
250 - 269
•
230 - 249
•
210 - 229
•
190 - 209
•
171 - 189
•
170
•
150 - 169
•
130 - 149
•
110 - 129
•
Under 110
Detail
Beginning Your Workout
51
Adjusting the Workout Intensity
To adjust the equipment incline, speed, and/or resistance,
use the motion controls located just below the console keys.
Figure 16: Motion controls
Adjust the motion controls, upward or downward, to change
the incline, speed, or resistance.
Figure 17: Adjust motion controls up or down
Many preset workouts will adjust these settings automatically
to meet the workout intensity. At any time during a workout,
you can adjust control settings and override the default
workout settings.
52
Operating and Maintaining the P80 Console
Viewing Your Workout Status While Exercising
The Status Bar contains status measurements and is visible
across the top of the viewing screen. Information displayed in
the Status Bar helps you measure how your body is
responding to the exercise session. The default status
measurements displayed are:
Total Distance
Calories Burned
Time Remaining
Average Speed (displayed as strides per minute, pace, or
RPM depending on equipment type)
 Heart Rate
You can modify how a measurement appears in the Status
Bar. For example, you can view the length of your exercise
session as time elapsed, or as time remaining.




There are two ways to modify the display:


Change the default value setting.
Change the view on the Status Bar.
To modify the status measurement using the Status Bar:
1. On the Status Bar, touch the corner arrow on the status
category to pull down the menu.
2. On the drop-down menu, touch an alternate display
measurement to display in the Status Bar.
The alternate measure moves to the top of the Status Bar
and replaces the default measurement. The menu closes.
3. Touch the arrow again to retract the menu.
4. Repeat with any status category to customize your
workout status view.
Note: Administrators and registered service technicians
can override status settings.
53
Beginning Your Workout
Scoring Your Fitness Workout
This information helps you interpret your score for the Test
Your Fitness workout.
The score for this test is determined by this formula: Rate of
oxygen (O2) consumption, in ml per minute, modified for the
user’s maximum heart rate (220 - age), divided by the user’s
weight in kilograms.
Table 12. Fitness score reference tables
Low Fitness Level
Age
Low Fitness Male
Low Fitness Female
28 - 39
< 35
< 28
40 - 49
< 35
< 26
50 - 59
< 29
< 24
60 and over
< 24
< 22
Medium Fitness Level
Age
Medium Fitness Male
Medium Fitness
Female
28 - 39
35 - 42
28 - 33
40 - 49
32 - 39
26 - 31
50 - 59
29 - 36
24 - 29
60 and over
24 - 31
22 - 26
High Fitness Level
Age
High Fitness Male
High Fitness Female
28 - 39
> 42
> 33
40 - 49
> 39
> 31
50 - 59
> 36
> 28
60 and over
> 31
> 26
54
Operating and Maintaining the P80 Console
Chapter
5
Maintenance
To keep the equipment functioning properly, perform the
minor maintenance tasks in this section at the intervals
suggested. Failure to maintain the equipment as described in
this section could void the Precor Limited Warranty.
DANGER
To reduce the risk of electrical shock, always
disconnect the equipment from its power source
before cleaning it or performing any maintenance
tasks. If the equipment uses an optional power
adapter, disconnect the adapter.
Cleaning the Console and Display
The console and screen require little maintenance once
installed. Precor recommends that you clean the console and
screen before and after each exercise session.
To remove dust and dirt from the console:
 Wipe all exposed surfaces with a soft cloth that you have
moistened with a solution of 30 parts of water to 1 part of
Simple Green® (for more information, visit
www.simplegreen.com).
To clean the screen:
The manufacturer recommends diluting one part 91%
isopropyl alcohol solution in one part water, or using the
91% isopropyl alcohol solution in its original strength. Be
sure to follow the solvent manufacturer’s precautions and
directions when using any solvent.

CAUTION: Potentially hazardous situations associated with the
use of isopropyl alcohol may result in minor or moderate injury
and property damage. To avoid these situations, follow all
instructions and recommendations in the manufacturer’s Material
Safety Data Sheet and product label.
56
Operating and Maintaining the P80 Console
Important: Do not use any acidic cleaners. Doing so will weaken
the paint or powder coatings and void the Precor Limited
Warranty. Never pour water or spray liquids directly on the
console or console’s screen.



It is important to avoid using any corrosive chemicals on the
console or screen.
Always dampen the cloth and then clean the screen. Be sure
to spray the cleaning liquid onto the cloth, not the screen, so
that drips do not seep into the console.
Apply the cleaner with a soft, lint-free cloth. Avoid using gritty
cloths.
Changing the Belt (Newer Model AMT Only)
The newer model AMT uses belts to provide motion. These
belts eventually wear and must be replaced.
When the belt stride count reaches 90 million, the message
BELTS MUST BE CHANGED SOON scrolls on the Welcome
screen. While this message appears, the AMT operates
normally.
Important: If this message displays on your AMT, please contact
Precor Customer Support for assistance.
When the belt stride count reaches 100 million (and the belt
has not been changed), the message BELTS CHANGE
REQUIRED scrolls continuously on the Welcome screen. The
input keys are not functional and the user cannot enter values
or begin a workout until the belts are changed. Please contact
Precor Customer Support to schedule a belt change.
Operating and Maintaining
the P80 Console
Precor Incorporated
20031 142nd Avenue NE
P.O. Box 7202
Woodinville, WA USA 98072-4002
P80 OMG 301407-301 rev F, en
March 2012
Assembling and Maintaining
TRM 800-Series Treadmills
Precor Incorporated
20031 142nd Avenue NE
P.O. Box 7202
Woodinville, WA USA 98072-4002
TRM 800-Series PAG/OM 300713-341 rev G
Warranty #36286-114
14 February 2011
Edition Information
ASSEMBLING AND MAINTAINING TRM 800-SERIES
TREADMILLS
P/N 300713-341 rev G
Copyright © February 2011 Precor Incorporated. All rights
reserved. Specifications subject to change without notice.
Trademark Note
Precor, AMT, and EFX are registered trademarks and Preva is
a trademark of Precor Incorporated. Other names in this
document may be the trademarks or registered trademarks of
their respective owners.
Intellectual Property Notice
All rights, title, and interests in and to the software of the
Preva Business Suite, the accompanying printed materials,
any copies of such software, and all data collected via the
Preva Business Suite, are exclusively owned by Precor or its
suppliers, as the case may be.
Precor is widely recognized for its innovative, award-winning
designs of exercise equipment. Precor aggressively seeks U.S.
and foreign patents for both the mechanical construction and
the visual aspects of its product design. Any party
contemplating the use of Precor product designs is hereby
forewarned that Precor considers the unauthorized
appropriation of its proprietary rights to be a very serious
matter. Precor will vigorously pursue all unauthorized
appropriation of its proprietary rights.
Precor Incorporated
20031 142nd Ave NE, P.O. Box 7202
Woodinville, WA 98072-4002
1-800-347-4404
http://www.precor.com
Important Safety Instructions
Read the following precautions thoroughly before you begin
assembly, and save them afterward for future reference.
Safety Precautions
Always follow basic safety precautions when using this
equipment to reduce the chance of injury, fire, or damage.
Other sections in this manual provide more details of safety
features. Be sure to read these sections and observe all safety
notices. These precautions include the following:






Read all instructions in this guide before installing and
using the equipment and follow any labels on the
equipment.
Make sure all users see a physician for a complete
physical examination before they begin any fitness
program.
Il est conseillé de subir un examen médical complet avant
d’entreprendre tout programme d’exercise. Si vous avez des
étourdissements ou des faiblesses, arrêtez les exercices
immédiatement.
Do not allow children, or people unfamiliar with the
operation of this equipment, on or near it. Do not leave
children unsupervised around the equipment.
Make sure all users wear proper exercise clothing and
shoes for their workouts and avoid loose or dangling
clothing. Users should not wear shoes with heels or
leather soles, and they should check the soles of their
shoes to remove any dirt and embedded stones. They
should also tie long hair back.
Never leave the equipment unattended when it is plugged
in. Unplug the equipment from its power source when it is
not in use, before cleaning it, and before providing
authorized service.
Note: The optional power adapter is considered a power
source for self-powered equipment.
4
Assembling and Maintaining TRM 800-Series Treadmills












Use the power adapter provided with the equipment. Plug
the power adapter into an appropriate, grounded power
outlet as marked on the equipment.
Care should be taken when mounting or dismounting the
equipment.
Read, understand, and test the emergency stop
procedures before use.
Keep the power cord or optional power adapter and plug
away from heated surfaces.
Route power cables so that they are not walked on,
pinched, or damaged by items placed upon or against
them, including the equipment itself.
Ensure the equipment has adequate ventilation. Do not
place anything on top of or over the equipment. Do not
use on a cushioned surface that could block the
ventilation opening.
Assemble and operate the equipment on a solid, level
surface.
Proper Location for Equipment
 For all equipment other than treadmills: Locate at
least 40 inches (1 meter) away from walls or
furniture on either side of the equipment, and 40
inches (1 meter) away from objects behind the
equipment.
 For treadmills: Locate at least 40 inches (1 meter)
away from walls or furniture on either side of the
treadmill, and at least 80 inches (2 meters) away
from objects behind the treadmill.
Keep equipment away from water and moisture. Avoid
dropping anything on or spilling anything inside the
equipment to prevent electric shock or damage to the
electronics.
Do not operate electrically powered equipment in damp
or wet locations.
Never operate this equipment if it has a damaged cord or
plug, if it is not working properly, or if it has been dropped,
damaged, or exposed to water. Call for service
immediately if any of these conditions exist.
Maintain the equipment to keep it in good working
condition, as described in the Maintenance section of the
assembly and maintenance guide. Inspect the equipment
for incorrect, worn, or loose components, and then
correct, replace or tighten prior to use.
Important Safety Instructions











5
When using the treadmill, always attach the safety clip to
your clothing before beginning your workout. Failure to
use the safety clip may pose a greater risk of injury in the
event of a fall.
Also, verify that the running belts on treadmills are clean
and running smoothly.
Do not allow runners over 350 pounds (160 kg) or
walkers over 500 pounds (225 kg) to use the treadmill.
If you plan to move the equipment, obtain help and use
proper lifting techniques. Refer to the "Moving the
Equipment" section of the assembly and maintenance
guide.
Use the equipment only for its intended purpose as
described in this manual. Do not use accessory
attachments that are not recommended by Precor. Such
attachments may cause injuries.
Do not operate the equipment where aerosol (spray)
products are being used or where oxygen is being
administered.
Do not use outdoors.
Do not attempt to service the equipment yourself, except
to follow the maintenance instructions in this manual.
Never drop or insert objects into any opening. Keep hands
away from moving parts.
Do not set anything on the stationary handrails,
handlebars, control console, or covers. Place liquids,
magazines, and books in the appropriate receptacles.
Do not lean on or pull on the console at any time.
CAUTION: DO NOT remove the cover, or you may risk injury due
to electric shock. Read the assembly and maintenance guide
before operating. There are no user-serviceable parts inside.
Contact Customer Support if the equipment needs servicing. For
use with single phase AC supply only.
Safety Code
The club owner or manager has the option to enable the
safety code. With the code enabled, a user must enter four
number keys in the correct order before using the equipment.
If the user does not press the correct keys within two minutes,
he or she is denied access to the equipment.
6
Assembling and Maintaining TRM 800-Series Treadmills
Educating Users
Take time to educate users about the Important Safety
Instructions found in both the User Reference Manual and
Product Owner’s Manual. Explain to your club or facility
patrons that they should observe the following precautions:




Hold onto a stationary handrail or handlebar while
assuming the starting position on the equipment.
Face the console at all times.
On treadmills, straddle the running belt and attach the
safety clip to clothing at waist level before touching the
control console.
Important: For safety, make sure users step onto the running
belt while it is moving at or below 1 mile per hour (1.6
kilometers per hour).
Hold on to a stationary handrail or handlebar with one
hand whenever you operate the console keys with the
other hand.
Hazardous Materials and Proper Disposal
The batteries within self-powered equipment contain
materials that are considered hazardous to the environment.
Federal law requires proper disposal of these batteries.
If you plan to dispose of your equipment, contact Precor
Commercial Products Customer Support for information
regarding battery removal. Refer to Obtaining Service.
Important Safety Instructions
7
Product Recycling and Disposal
This equipment must be recycled or discarded according to
applicable local and national regulations.
Product labels, in accordance with European Directive
2002/96/EC concerning waste electrical and electronic
equipment (WEEE), determine the framework for the return
and recycling of used equipment as applicable throughout the
European Union. The WEEE label indicates that the product is
not to be thrown away, but rather reclaimed upon end of life
per this Directive.
In accordance with the European WEEE Directive, electrical
and electronic equipment (EEE) is to be collected separately
and to be reused, recycled, or recovered at end of life. Users
of EEE with the WEEE label per Annex IV of the WEEE
Directive must not dispose of end of life EEE as unsorted
municipal waste, but use the collection framework available
to customers for the return, recycling, and recovery of WEEE.
Customer participation is important to minimize any potential
effects of EEE on the environment and human health due to
the potential presence of hazardous substances in EEE. For
proper collection and treatment, refer to Obtaining Service.
Regulatory Notices for the RFID Module
When equipped with a control console as described in this
document, this equipment may include a radio-frequency
identification (RFID) module. The RFID module has been
certified to operate at temperatures between -20ºC and 85°C
(-4°F and 185°F).
8
Assembling and Maintaining TRM 800-Series Treadmills
Radio Frequency Interference (RFI)
The RFID module conforms to the following national
standards defining acceptable limits for radio frequency
interference (RFI).
Federal Communications Commission, Part 15
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a commercial
installation. The equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the owner’s manual instructions, can cause
harmful interference to radio communications.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
WARNING
Per FCC rules, changes or modifications not
expressly approved by the manufacturer could
void the user’s authority to operate the
equipment.
Industry Canada
This device complies with RSS-210:2007 of the Spectrum
Management & Telecommunications Radio Standards
Specification. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation.
This Class A digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada.
ATTENTION: Haute Tension
Débranchez avant de réparer
Important Safety Instructions
European Applications
CE compliance is claimed to the following directives:



1999/5/EC R&TTE Directive
2006/95/EC LVD Directive
2002/95/EC RoHS Directive
Directive compliance has been verified to the following
standards:






EN 55022
EN 300 330-1 V1.5.1
EN 300 330-2 V1.3.1
EN 301 489-3 V1.4.1
EN 301 489-1 V1.8.1
EN 60950-1
Regulatory Notices for Cardiovascular
Exercise Equipment
The regulatory information in this section applies to the
exercise equipment and its control console.
Safety Approvals for Cardiovascular Equipment
Precor equipment has been tested and found to comply with
the following applicable safety standards.
Cardiovascular Type Equipment:
 CAN/CSA, IEC, EN 60335-1 (Household and similar

electrical appliances - Safety)
EN 957 (Stationary training equipment, class S/B
compliant equipment)
PVS and P80 Regulatory Notice
This Precor equipment has been tested and found to comply
with the following applicable safety standards.

CAN/CSA, UL, IEC, EN 60065 (Audio, video and similar
electronic apparatus - Safety)
9
10
Assembling and Maintaining TRM 800-Series Treadmills
Radio Frequency Interference (RFI)
This Precor exercise equipment conforms to the following
national standards defining acceptable limits for radio
frequency interference (RFI).
Federal Communications Commission, Part 15
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a commercial
installation. The equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the owner’s manual instructions, may cause
harmful interference to radio communications.
WARNING
Per FCC rules, changes or modifications not
expressly approved by Precor could void the
user’s authority to operate the equipment.
Industry Canada
This Class A digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada.
ATTENTION: Haute Tension
Débranchez avant de réparer
European Applications
CE compliance is claimed to the following directives:



2004/108/EC EMC Directive
2006/95/EC LVD Directive
2002/95/EC RoHS Directive
Directive compliance has been verified to the following
standards:




EN 55022
EN 55024
EN 60335-1
EN 60065 (P80 and PVS)
11
Important Safety Instructions
Treadmill Grounding Instructions
The treadmill must be grounded. If the equipment
malfunctions or breaks down, grounding draws off electric
current and reduces the risk of electric shock. The power cord
on the treadmill is equipped with a grounding conductor and a
three-pin grounding plug. This plug must be inserted into an
outlet that is properly installed and grounded in accordance
with all local codes and ordinances. Failure to ground the
treadmill properly may void the Precor Limited Warranty.
DANGER
Improper connection of the grounding conductor
can result in a risk of electric shock. Check with a
qualified electrician or service person if you are
not sure whether the equipment is properly
grounded. Do not modify the plug provided with
the treadmill. If the plug does not fit the outlet,
have a proper outlet installed by a qualified
electrician.
Electrical Recommendations:
120 V and 240 V Treadmills
Note: This is a recommendation only. NEC (National Electric
Code) guidelines or local region electric codes must be
followed.
You should have received a power cable that meets your local
electrical code requirements along with the equipment.
Precor treadmills must be connected to a 20 amp isolated
branch circuit that can be shared only with one PVS. If you
need additional help with the power connections contact your
Precor authorized dealer.
12
Assembling and Maintaining TRM 800-Series Treadmills
Important: An individual branch circuit provides a hot conductor
and neutral conductor to a receptacle. The conductors must not be
looped, "daisy-chained", or connected to any other conductors.
The circuit must be grounded according to NEC guidelines or local
region electric codes.
Figure 1: North American 120-volt, 20-amp power receptacle
Figure 2: North American 240-volt, 20-amp power receptacle
Obtaining Service
Do not attempt to service the equipment except for
maintenance tasks. If any items are missing, contact your
dealer. For more information regarding customer support
numbers or a list of Precor authorized service centers, visit
the Precor web site at http://www.precor.com.
Obtaining Updated Documentation
Current documentation for Experience Series consoles and
Preva Networked Fitness software is available at
http://www.precor.com/productmanuals. You may want to
check in for updated information from time to time as the
universe of Preva features expands.
Table of Contents
Important Safety Instructions ................................................... 3
Safety Precautions .................................................................................3
Safety Code ............................................................................................ 5
Educating Users .................................................................................... 6
Hazardous Materials and Proper Disposal .................................... 6
Product Recycling and Disposal ....................................................... 7
Regulatory Notices for the RFID Module ....................................... 7
Regulatory Notices for Cardiovascular
Exercise Equipment ...................................................................... 9
Treadmill Grounding Instructions ....................................................11
Electrical Recommendations: 120 V
and 240 V Treadmills ..................................................................11
Obtaining Service................................................................................. 12
Obtaining Updated Documentation ............................................... 12
Assembling the Treadmill ....................................................... 15
Installation Requirements..................................................................16
Unpacking the Cables .........................................................................18
Assembling the Frame.......................................................................20
Completing Assembly ....................................................................... 25
Attaching the Power Cord Clips ..................................................... 26
Checking Treadmill Alignment and Adjusting
the Running Belt .......................................................................... 27
Leveling the Unit ................................................................................. 28
Plugging In the Power Cord.............................................................. 29
Breaking in the Equipment ............................................................... 29
Installing the Console ...............................................................31
Threading the Cable Assembly (P80) ........................................... 31
Connecting Cables (P80) ................................................................. 33
Completing the Console Installation (P80) ................................ 37
Threading the Cable Assembly (P30 and P20) ......................... 38
Connecting Cables (P30) ................................................................. 39
Connecting Cables (P20) ................................................................ 40
Completing the Console Installation (P30 and P20).................41
Reassembling the Treadmill Fairing .............................................. 42
Verifying That the Heart Rate Display Is Operational .............. 43
14
Assembling and Maintaining TRM 800-Series Treadmills
Maintenance ............................................................................ 45
Daily Cleaning ..................................................................................... 45
Daily Inspection .................................................................................. 46
Weekly Maintenance ........................................................................ 47
Monthly Maintenance ...................................................................... 47
Adjusting the Running Belt .............................................................. 48
Checking the Alignment of the Running Belt .............................. 49
Storing the Chest Strap..................................................................... 50
Moving the Equipment ..................................................................... 50
Long-Term Storage ............................................................................. 51
Treadmill Safety Features ....................................................... 53
Entering the Safety Code...................................................................53
Using the Treadmill Safety Clip ...................................................... 54
Turning the Treadmill On and Off ..................................................55
Weight Limit .........................................................................................55
Location..................................................................................................55
Commercial Cardiovascular Equipment Limited Warranty .... 57
Chapter
1
Assembling the Treadmill
Important: The instructions in the following procedures are
described from the perspective of a person standing directly in
front of the equipment (that is, on the opposite side of the
control console from a person using the equipment). These
descriptions may not match the names of certain parts in the parts
list, because such parts are named relative to the back of the
equipment.
WARNING
You will need assistance to assemble this unit.
DO NOT attempt assembly by yourself.
To prepare the treadmill for assembly:
1. Have your assistant help place the shipping carton close
to the location where you plan to use the treadmill. Break
down the sidewalls of the shipping carton so that they lie
flat. Remove the loose contents of the carton.
CAUTION: Use safe lifting techniques throughout the
following steps. To prevent injury to yourself or damage to
the equipment, obtain appropriate assistance before
removing the unit from the pallet.
2. With the help of as many assistants as necessary, lift the
treadmill off of the pallet and roll it gently onto the floor.
3. Make sure that the power switch is OFF. Check the
ON/OFF power switch on the front of the treadmill. Place
the switch in the O (OFF) position. Make sure that the
treadmill is not plugged into a power source.
Note: In the following step, do not roll the treadmill over
its power cord.
4. Lift the unit by placing hands on opposite sides of the rear
cross brace found under the treadmill’s running belt. Roll
the treadmill on its front wheels to the area where it will
be used.
16
Assembling and Maintaining TRM 800-Series Treadmills
5. Remove the shipping fasteners from the front panel using
a ¹₄-inch hex key and a ¹⁄₂–inch box-end wrench.
6. Remove any tape or wire ties securing the console cable
to the side of the unit.
Before you begin, verify that you have received the following
parts:




Base frame assembly
Left and right upright supports
Center fairing with handrails
Hardware kit
Installation Requirements
The location where the treadmill is installed must provide
power connections that supply the appropriate voltage, a 20A
dedicated branch circuit, and grounding as specified on the
treadmill.
CAUTION: Do not use a non-grounded outlet or transformer. Do
not remove or otherwise bypass the plug with an adapter.
Electrical damage can occur and void the Precor Limited Warranty
if the treadmill is connected to an improper power source.
Required Tools
 ¹₄-inch hex wrench
 ⁵₃₂-inch hex wrench (ball end is desirable)
 ¹₂-inch box-end wrench
 Bubble level
 #2 Phillips screwdriver
 String or fish tape
 Wire cutter
17
Assembling the Treadmill
Hardware Kit (not to scale)
The hardware kit shipped with this equipment contains the
fasteners and other hardware components shown in the
following table. Before you begin assembly, make sure that
your hardware kit is complete. If not, please contact Precor
Customer Support.
Fasteners
Quantity
Power cord clips
6
⁵₁₆-inch x ³₄-inch socket head
screws
8
⁵₁₆-inch x ³₄-inch buttonhead
screws (zinc finish)
6
⁵₁₆-inch x ³₄-inch buttonhead
screws (black finish)
4
Flat head hex drive screws (¹₄-inch
x ³₄-inch)
4
⁵₁₆-inch locknuts with star washers
4
⁵₁₆-inch split lock washers
10
⁵₁₆-inch flat washers (zinc finish)
6
⁵₁₆-inch flat washers (black finish)
12
Note: Retrieve the cables and other hardware shipped with
the console before you begin installation.
18
Assembling and Maintaining TRM 800-Series Treadmills
Unpacking the Cables
To connect the console to the base unit, you may need up to
five cables, as follows:





Ethernet (P80 only)
Television (P80 only)
Power (P80 only)
Base unit data
Automatic stop sensor (Auto Stop™)
The first three of these cables are shipped with the P80
console. The remaining two are shipped inside the treadmill
fairing.
To unpack the cables:
1. Open the box containing the P80 console. Retrieve the
Ethernet, television, and power cables.
2. Remove the two screws holding the center column cover
in place. Remove the cover and set it aside, along with the
two screws.
Figure 3: Removal and replacement of the center column
cover
19
Assembling the Treadmill
3. Remove the seven screws holding the back cover in place.
Snap the back cover loose and set it aside, along with the
seven screws.
Figure 4: Removal and replacement of the rear fairing cover
4. Remove the two ends of the base unit data cable from the
left arm of the fairing (position 1 in the following
illustration). Route the shorter of the two cable ends into
the fairing and extend the long end outward.
Figure 5: Cable storage locations in the treadmill fairing: base
unit data cable (1) and Auto Stop cable (2)
5. Remove the Auto Stop cable from the tube on the
right-hand side of the fairing (position 2 in the preceding
illustration).
Important: In the following step, make sure that the end of
the data cable with the ferrite bead is the upper end. Likewise,
on the automatic stop sensor cable, the three-conductor
socket is the lower end and the four-conductor socket is the
upper end.
20
Assembling and Maintaining TRM 800-Series Treadmills
6. Remove any tape or ties that secure the cables, then
unwind them and remove any kinks. Gather the cables
into a single bundle (referred to later as the cable
assembly).
Note: Arranging the cables so that the connectors are
slightly staggered at the bottom end (but still within one
inch or three centimeters overall) can help when feeding
the cable assembly through narrow openings in the frame.
Assembling the Frame
DANGER Make sure that the treadmill is not connected to
any power source before you begin the following
procedures.
As you add the left-hand and right-hand upright supports to
the treadmill base, you will need to make sure that the cable
assembly is threaded properly through the left-hand support
so that the necessary connections are available when you add
the control console. A fish tape (a thin metal strip with a hook
or clasp on one end, available from professional hardware
vendors) can be helpful during this procedure.
To begin assembly of the frame:
1. Remove the hood and set it aside.
Figure 6: Hood removal
2. Place the right-hand upright support into the base frame
side bracket.
21
Assembling the Treadmill
3. Secure the right-hand upright support to the side bracket
using four socket head screws, four black washers, and
two locknuts. Partially tighten the fasteners.
Figure 7: Upright support attachment, right side
4. Using the fabric connectors provided, attach the power
supply to the right-hand side of the front crossmember on
the treadmill base. (The gray rectangle in the following
illustration shows where you should mount the power
supply.)
5. Route the DC output cable of the power supply through
the clips between the power supply and the belt motor.
Pass the end of the cable under the mounting bracket for
the lift motor.
6. Connect the black three-conductor plug on the AC wiring
harness to the socket on the power supply.
22
Assembling and Maintaining TRM 800-Series Treadmills
To thread cables through the frame:
1. Feed the cable assembly downward through the left-hand
upright support and out through the opening in the lower
end of the support. Drape the remaining cable over the
front of the support and tape it into place if necessary to
secure it temporarily.
2. Feed the cable assembly through the grommet in the
left-hand side bracket of the base frame. Connect the
individual cables as shown in the following illustration and
table.
Figure 8: Cable connections and mounting points in the
treadmill base
Table 1. Cable connections and mounting points in the
treadmill base
Component
Appearance
Base unit data
cable
Flat with silver insulation
Ethernet cable
Flat with black insulation
Lower connection
point
23
Assembling the Treadmill
Component
Appearance
Television cable
Round with black insulation
Console power
cable
Dual leads with red and
black insulation
Auto Stop sensor
cable
Round with black insulation
Power supply
Rectangular, black, 5" x
2¹₄" x 1¹₄"
Lower connection
point
CAUTION: Be careful not to cut or pinch any wires during the
following step.
3. Place the left-hand upright support into the base frame
side bracket.
4. Secure the left-hand upright support to the side bracket
using four socket head screws, four black washers, and
two locknuts. Partially tighten the fasteners.
Figure 9: Upright support attachment, left side
5. Lower the treadmill fairing assembly over the upright
supports and align it to them.
Important: In the following step, take care not to unseat any
of the components in the stop switch.
6. Feed the upper end of the cable assembly through the
fairing so that its upper end extends through the bottom
opening in the center column and out the round opening
in the console mounting plate.
24
Assembling and Maintaining TRM 800-Series Treadmills
7. Route the cable assembly through the cable guides in the
fairing, then wrap the guides around the cable assembly
to secure it. Push any extra cable into the upright support.
Note: In the following step, use the zinc-finish buttonhead
screws and flat washers from the hardware kit.
Important: Do not wrench-tighten the fasteners in the
following step until the unit has been fully assembled. Make
sure the fasteners do not pinch any cables. The Precor Limited
Warranty does not cover cables damaged by improper
installation.
8. Secure the fairing assembly using six buttonhead screws
and six washers. Partially tighten the fasteners.
Figure 10: Handrail and console assembly attachment
9. Position the ferrite bead on the lower unit data cable
inside the left arm of the fairing and secure it in place
using a plastic tie.
Assembling the Treadmill
25
Completing Assembly
After the upright supports and the fairing are in place, replace
the hood on the treadmill base and finish securing the
fasteners.
CAUTION: Be aware of the handrail extensions when you are
working around the front of the unit. It is easy to bump your head
or sustain other injuries if you ignore the location of the handrail
extensions.
To secure the fasteners:
1. Using an alternating order, tighten the eight fasteners that
secure the upright supports to the treadmill base.
2. Fully tighten the six screws that secure the console fairing
to the upright supports.
To complete assembly of the treadmill base:
Important: Use your fingers to align and thread the four hood
fasteners properly. Then use a wrench to tighten the hood
fasteners completely as described in the following step.
1. Thread the four black buttonhead screws (with black
washers) into their holes, leaving gaps of about ¹₄ inch
between the heads of the screws and the surface of the
treadmill frame.
2. Place the front of the hood on the two front screws. Make
sure the screws are aligned with the notches in the hood
and the washers are outside the hood.
3. Lower the back of the hood until the side screws rest
inside the notches in the internal wall of the hood. Make
sure the washers are outside the internal wall (on the
same side as the screw heads).
4. Tighten all four screws securely, starting with the front
screws.
26
Assembling and Maintaining TRM 800-Series Treadmills
Note: Using a hex wrench, reach through the openings in
the outer sides of the hood to tighten the side screws.
Figure 11: Hood and fastener placement
Attaching the Power Cord Clips
This treadmill includes a set of clips that hold the power cord
away from the incline lift movement and other potential
sources of wear and damage. Use these clips to secure the
power cord to the base frame beneath the hood.
Important: When attaching the power cord clips, keep users’
safety and the placement of the power cord in mind. If the power
cord runs along the length of the treadmill, use the power cord
clips to secure it to the side rail.
To attach the power cord clips:
1. Wrap the clip around the power cord near the power
switch at the front of the treadmill and clamp it shut.
Figure 12: Clip placement on power cord
27
Assembling the Treadmill
2. Insert the serrated portion of the clip into the hole located
under the front of the unit on either side of the power
switch.
Figure 13: Power cord placement under front of treadmill
3. Place the clips along the length of the power cord as
needed while you direct the cord to the power outlet. The
holes, found in the frame beneath the side rail, are spaced
12 inches (31 cm) apart along the length of the side rail.
Figure 14: Power cord placement under side of treadmill
Checking Treadmill Alignment and
Adjusting the Running Belt
Before you allow anyone to use the treadmill, you must check
the alignment of the running belt and adjust it as needed. For
more information, refer to Checking the Alignment of the
Running Belt and Adjusting the Running Belt in the Maintenance
chapter.
28
Assembling and Maintaining TRM 800-Series Treadmills
Leveling the Unit
The treadmill deck must be absolutely level from side to side
to keep the belt in alignment and ensure proper operation. If
the load is not equally distributed across the treadmill deck,
users may feel excessive vibration or observe it at the
console. You must make sure the deck is level before allowing
anyone to use the treadmill.
Important: Observe the following precautions throughout this
procedure:



Adjust only one rear foot at a time.
Do not raise the unit beyond ³⁄₄ inch (2 cm).
Install the unit only on an absolutely even surface. Adjusting
the rear feet cannot compensate for variations in the surface
under the unit.
To level the treadmill:
1. Place a bubble level across the running belt to see
whether the treadmill is level.
Figure 15: Bubble level placement on running belt
If the treadmill … Then …
Is level
Skip to the next procedure.
Is not level
Continue with step 2.
2. Position yourself next to the adjustable rear feet.
Important: Be sure that your assistant uses proper lifting
techniques in the following step.
3. Ask a capable assistant to lift the rear portion of the
treadmill (using proper lifting techniques).
29
Assembling the Treadmill
4. Adjust the rear feet as needed.
Figure 16: Leveling foot adjustment
5. Repeat steps 1 through 4 until the treadmill is level.
6. If necessary, adjust the rear feet so that the user’s weight
is distributed evenly on the treadmill.
Plugging In the Power Cord
CAUTION: Use the supplied power cord. Do not remove or
otherwise bypass the 3-prong plug with an adapter to use a
non-grounded outlet. Do not plug the unit into a power
transformer in an attempt to adjust the voltage requirements.
Failure to follow these instructions might damage the unit and
void the Precor Limited Warranty.
After assembly is complete, plug the power cord into an
appropriate outlet.
Important: The treadmill requires a 20-amp dedicated branch
circuit. Refer to Treadmill Grounding Instructions.
Breaking in the Equipment
Precor equipment does not require an actual break-in period.
However, moving components such as belts, gears, and
bearings can settle while the equipment is being stored or
shipped. This can cause the equipment to operate with a
small amount of roughness or noise when it starts up for the
first time.
The equipment usually returns to smooth operation after a
day or two of normal use. If it does not, contact your dealer
for assistance. For more information, refer to Obtaining
Service.
30
Assembling and Maintaining TRM 800-Series Treadmills
Chapter
2
Installing the Console
To make installation easier, all Precor Experience Series
consoles use the same mounting hardware and connector
locations whenever possible. The installation sequence for
any of them is as follows:



Threading the cable assembly
Connecting cables
Completing the installation (tightening the mounting
screws and attaching the back cover)
The following sections describe how to perform these tasks.
Threading the Cable Assembly (P80)
Earlier in the installation, you threaded the necessary cables
through the frame of the base unit and out the passthrough
opening in the console mount. As you line up the back plate
on the console with the console mount, you must make sure
that the cable assembly passes correctly through the
openings in both components.
32
Assembling and Maintaining TRM 800-Series Treadmills
Important: Before you begin the following procedure, remove the
rear cover from the control console. To remove the cover, use your
fingernails to pry the lower edge loose, then swing the cover up
and out as shown in the following illustration.
Figure 17: Removing the access cover from the P80 console
To thread the cable assembly:
1. Make sure that as much of each cable as possible passes
through the opening in the middle of the console mount
on the base unit.
2. Position the console over the console mount.
3. Rest the console on the console mount so that the notch
on the bottom of the console’s back plate rests on the
rectangular hook at the bottom of the console mount, as
shown in the following figure.
Figure 18: Console positioning on base unit
33
Installing the Console
4. Tilt the console forward until it stops. Use one hand to
steady the console in this position, or ask your assistant
to do so.
5. Using a #2 Phillips screwdriver, remove the two #8-32 x
¹₂” pan-head machine screws securing the upper back
cover of the fairing, as shown in the previous figure. Set
the cover and the screws aside.
Connecting Cables (P80)
After the console has been seated, separate the individual
cables out of the end of the cable assembly and attach them
to the appropriate circuit connectors inside the console. Refer
to the following diagram and table to identify the cables and
connectors.
Figure 19: Cable connections, P80 console
Table 2. P80 internal cable connections
Cable
Connector Type
Ethernet (LAN)
Eight-contact modular, on
round black cable
Circuit
Connector
Location
34
Assembling and Maintaining TRM 800-Series Treadmills
Cable
Connector Type
TV in
F-type coaxial
Power
Two-contact plug,
polarized and latched
Data from base unit
Eight-contact modular, on
flat gray cable
Heart rate sensors
Four-contact strip, keyed
Safety key
(treadmills only)
Six-contact strip, keyed
CSAFE
Eight-contact modular, on
flat gray cable
Auto Stop sensor
(treadmills only)
Four-contact strip, keyed
Circuit
Connector
Location
To simplify installation and maintenance, route and connect
cables 1 through 5 according to the following instructions.
Note: In the illustrations in this section, some cables are
omitted for the sake of clarity.
Connecting the Television Cable
The console’s television tuner is mounted inside the console’s
back plate. The tuner includes a short cable adapter that
allows the television cable to be connected outside the back
plate.
To connect the television cable:
1. Pull the cable out through the lower right corner of the
back plate.
2. Route the cable counterclockwise around the outside of
the back plate.
3. Attach the connector on the cable to the connector on the
tuner cable and tighten the two connectors securely using
two ⁷₁₆-inch open-end wrenches. Position both
connectors above the upper right corner of the back plate.
4. Use a plastic tie to secure the connectors to the top of the
back plate. Pass the tie through the two small holes near
the upper right corner of the back plate, then wrap it
around the connectors and tighten it securely. Cut off and
remove the protruding end of the tie.
Installing the Console
35
The following illustration shows how the cable is positioned
once it is installed.
Figure 20: Connecting the television cable
Connecting the Ethernet and Base Unit Data Cables
Both the Ethernet and base unit data cables pass through the
cutaway opening at the upper right corner of the back plate
and connect to nearby modular jacks in the console. Because
of this, it is important to exercise caution when connecting
the cables. The black Ethernet cable connects to a jack just
underneath the perforated metal bracket at the very top of
the opening in the console. The gray base unit data cable
connects to a lower jack closer to the back plate.
Refer to the following illustration for the correct position of
both cables.
CAUTION: If you connect the base unit data cable to the wrong
jack, the equipment will not function.
Figure 21: Connecting the Ethernet and base unit data cables
36
Assembling and Maintaining TRM 800-Series Treadmills
Connecting the Heart Rate Sensor Cable
The heart rate sensor cable passes through the cutaway
opening at the upper left corner of the back plate, then down
to the small circuit board at the lower left of the console. The
following illustration shows how the cable should look once it
is installed.
Figure 22: Connecting the heart rate cable
Connecting the Power Cable
Like the tuner, the console’s upper circuit board is equipped
with a cable adapter that relieves you of attempting to attach
a cable to a recessed jack. To connect the power cable, route
it through the cutaway opening at the upper left corner of the
back plate and plug it in to this adapter.
The following illustration shows how the cable should look
once it is installed.
Figure 23: Connecting the power cable
Installing the Console
37
Completing the Console Installation (P80)
Before you complete the final installation steps, double-check
the connections you have made. Make sure that all cables are
fully and securely connected, and that any unneeded cables
are tied back properly.
To complete the installation:
1. Feed extra cable back into the neck tube.
2. Tilt the control console backward (toward yourself) until
the tab on the top edge of its back plate slides along the
top edge of the console mount and the screw holes align
properly.
3. Insert the four ⁵₈-inch flat head screws through the holes
in the console mount and thread them into the holes in
the back plate on the console. Partially tighten the screws
using a ⁵₈-inch hex wrench.
4. Line up the two small tabs at the top of the console’s back
cover with the slots at the top of the opening in the
console case. Insert the tabs into the slots.
5. Insert the remaining tabs on the back cover with the
corresponding slots on the console case.
6. Press gently on the edges of the back cover to snap it into
place.
38
Assembling and Maintaining TRM 800-Series Treadmills
Threading the Cable Assembly (P30 and
P20)
Earlier in the installation, you threaded the necessary cables
through the frame of the base unit and out the passthrough
opening in the console mount. As you line up the back plate
on the console with the console mount, you must make sure
that the cable assembly passes correctly through the
openings in both components.
Important: Before you begin the following procedure, remove the
rear cover from the control console. Set the cover and its mounting
hardware aside for later use.
To thread the cable assembly:
1. Make sure that as much of each cable as possible passes
through the opening in the middle of the console mount
on the base unit.
2. Position the console over the console mount.
3. Rest the console on the console mount so that the notch
on the bottom of the console’s back plate rests on the
rectangular hook at the bottom of the console mount, as
shown in the following figure.
Figure 24: Console positioning on base unit
4. Tilt the console forward until it stops. Use one hand to
steady the console in this position, or ask your assistant
to do so.
5. Pull all cables upward and forward until you can drape
them over the top of the console’s back plate.
39
Installing the Console
Connecting Cables (P30)
After the console has been seated, separate the individual
cables out of the end of the cable assembly and attach them
to the appropriate circuit connectors inside the console. Refer
to the following diagram and table to identify the cables and
connectors.
Figure 25: Cable connections, P30 console
Table 3. P30 internal cable connections
Cable
Connector Type
Safety key
(treadmills only)
Six-contact strip, keyed
Auto Stop sensor
(treadmills only)
Four-contact strip, keyed
Data from base unit
Eight-contact modular,
on flat gray cable
Heart rate sensors
Four-contact strip, keyed
Circuit Connector
Location
40
Assembling and Maintaining TRM 800-Series Treadmills
Connecting Cables (P20)
After the console has been seated, separate the individual
cables out of the end of the cable assembly and attach them
to the appropriate circuit connectors inside the console. Refer
to the following diagram and table to identify the cables and
connectors.
Figure 26: Cable connections, P20 console
Table 4. P20 internal cable connections
Cable
Connector Type
Data from base unit
Eight-contact modular,
on flat gray cable
Heart rate sensors
Four-contact strip, keyed
Safety key
(treadmills only)
Six-contact strip, keyed
Auto Stop sensor
(treadmills only)
Four-contact strip, keyed
Circuit Connector
Location
Installing the Console
41
Completing the Console Installation (P30
and P20)
Before you complete the final installation steps, double-check
the connections you have made. Make sure that all cables are
fully and securely connected, and that any unneeded cables
are tied back properly.
To complete the installation:
1. Feed extra cable back into the neck tube.
2. Tilt the control console backward (toward yourself) until
the tab on the top edge of its back plate slides along the
top edge of the console mount and the screw holes align
properly.
3. Insert the four ⁵₈-inch flat head screws through the holes
in the console mount and thread them into the holes in
the back plate on the console. Partially tighten the screws
using a ⁵₈-inch hex wrench.
4. Line up the two small tabs at the bottom of the console’s
back cover with the slots at the bottom of the console
case. Insert the tabs into the slots.
5. Insert the two #8–32 x ¹₂-inch Phillips-head screws that
you removed earlier into the holes at the top edge of the
console’s back cover. Tighten the screws fully.
Important: Use caution not to pinch the cables between the
back cover and PVS mounting screw heads.
6. Fully tighten the four mounting screws (partially
tightened in step 3) using a ⁵₃₂-inch hex wrench.
42
Assembling and Maintaining TRM 800-Series Treadmills
Reassembling the Treadmill Fairing
After the console is in place, reattach the two cover panels of
the treadmill fairing.
Important: In the following procedure, do not allow the fasteners
to break or pinch any cables.
To reassemble the fairing:
1. Verify that the cable assembly is secure inside the cable
clips and that the ferrite bead on the base unit data cable
is tied securely into place in the left arm of the treadmill.
2. Snap the rear cover into place and attach the seven
screws you removed with it earlier.
Figure 27: Removal and replacement of the rear fairing cover
3. Hold the center column cover in place and attach the two
screws you removed with it.
Figure 28: Removal and replacement of the center column
cover
Installing the Console
43
Verifying That the Heart Rate Display Is
Operational
To verify that the heart rate display is operational:
1. Begin exercising on the equipment.
2. Grasp both touch-sensitive handlebars.
Note: The heart rate is read within ten seconds. During
that time, the heart on the display flashes.
3. Look at the HEART RATE display. After a few seconds, a
number appears indicating your heart rate.
4. If a number does not appear in the HEART RATE display,
check the cable connection to make sure it is properly
connected.
44
Assembling and Maintaining TRM 800-Series Treadmills
Chapter
3
Maintenance
To keep the equipment functioning properly, perform the
minor maintenance tasks in this section at the intervals
shown on the maintenance checklist. Failure to maintain the
equipment as described in this section could void the Precor
Limited Warranty.
DANGER
To reduce the risk of electrical shock, always
disconnect the equipment from its power source
before cleaning it or performing any maintenance
tasks. If the equipment is self-powered but also
uses the optional power adapter, disconnect the
adapter.
Daily Cleaning
Precor recommends that you clean the equipment before and
after each exercise session. To remove dust and dirt from the
equipment, wipe all exposed surfaces with a soft cloth that
you have moistened with one of the following cleaners:


A solution of 30 parts of water to 1 part of Simple Green®
(for more information, visit www.simplegreen.com)
ENVIR-O-SAFE oxygen enhanced cleaner or multi-task
cleaner concentrate, diluted according to the
manufacturer’s instructions (for more information, visit
www.daleyinternational.com)
46
Assembling and Maintaining TRM 800-Series Treadmills
Alternatively, you can clean the equipment with Athletix
fitness equipment cleaning wipes (for more information, visit
www.athletixproducts.com)
CAUTION: Read and follow the manufacturer’s instructions,
particularly dilution instructions, before using any cleaner on
Precor fitness equipment. Do not use concentrated cleaners at full
strength, or acidic cleaners of any kind; such cleaners weaken the
protective finish on the equipment and void the Precor Limited
Warranty. Never pour water or spray liquids onto any part of the
equipment. Allow the equipment to dry completely before using.
Vacuum the floor underneath the equipment frequently to
prevent the accumulation of dust and dirt that can interfere
with its operation. Use a soft nylon scrub brush to clean the
running belt.
CAUTION: On treadmills, as you clean the hood or side rails,
remain aware of the handrail extensions to avoid injury.
Daily Inspection
At least once every day, examine the equipment for the
following problems:






Slipping belts
Loose fasteners
Unusual noises
Worn or frayed power cords
Worn, damaged, or missing safety lanyards or clips
Any other indication that the equipment may be in need
of service
Important: If you determine that the equipment needs service,
disconnect all power connections (television, Ethernet, and power)
and move the equipment away from the exercise area. Place an
OUT OF SERVICE sign on the equipment and make it clear to all
patrons and other users that they must not use it.
To order parts or to contact a Precor authorized service
provider in your area, refer to Obtaining Service.
47
Maintenance
Weekly Maintenance
Perform the following maintenance tasks every week:
1.
2.
3.
4.
5.
6.
Elevate the tread to maximum incline, then turn off the
power switch or circuit breaker and unplug the unit from
the wall outlet.
Clean the floor under the equipment using a vacuum
cleaner or a damp mop.
When the floor is completely dry, reconnect the power
and return the treadmill to the level position.
Inspect the power cord to verify that it is not pinched
under the equipment or between any two moving parts.
Test all console functions, including heart rate monitoring
features.
Verify that the unit sits squarely on the floor. All of its feet
should be touching the floor and the unit should not rock
or wobble when in use. If not, re-level it as described in
Leveling the Unit.
Monthly Maintenance
DANGER USE EXTREME CAUTION when the rear cover of
any EFX is removed. Serious injury could result if
fingers are pinched between the flywheel spokes,
cranks, movable arms, and the drive weldment.
Securing the movable arm to the crank with a clamp
is recommended. Be aware of other people within
your work area who might cause the arm to move.
Perform the following maintenance tasks every month:
1.
Clean the frame, cover and arms with water or an
approved cleaner.
2. Wipe the exterior of the console with a damp sponge or
soft cloth, and dry with a clean towel. Keep water away
from electronic components to prevent electrical shock or
damage.
3. Clean the touchscreen using a soft, lint-free cloth
dampened with a 91% isopropyl alcohol solution (either
as sold or diluted with an equal amount of water).
4. Remove the rear cover. Vacuum out any debris, being
careful not to bring the vacuum cleaner nozzle too close
to any circuit board (unless your vacuum cleaner is
protected against static buildup).
48
Assembling and Maintaining TRM 800-Series Treadmills
5. Check the belt tension of the step-up and drive belts.
6. Clean and lubricate the lift motor screw with an approved
grease such as SuperLube® with Teflon® or Mobil 1®
synthetic grease (adjustable-ramp models only).
7. Check all fasteners for proper tightness and torque.
8. Replace all covers.
9. Verify that the unit sits squarely on the floor. All of its feet
should be touching the floor and the unit should not rock
or wobble when in use. If not, re-level it as described in
Leveling the Unit.
Adjusting the Running Belt
If you are unsure about adjusting the running belt, call Precor
Customer Support (refer to Obtaining Service).
CAUTION: For your safety, use the power switch to turn OFF the
treadmill before making any adjustments. Do not adjust the
running belt when someone is standing on it.
Important: This procedure uses the terms "left" and "right" as
they would appear to a person standing behind the treadmill and
facing the console. Make all belt adjustments on the adjusting
bolts at the rear corners of the treadmill, using the hex key
provided, and do not turn either bolt more than ¼ turn before
checking the alignment of the running belt again. Overtightening
the adjusting bolts can damage the treadmill.
To adjust the running belt:
1. Locate the adjusting bolts in the end caps at the rear
corners of the treadmill, as shown in the following
diagram.
Figure 29: Location of the adjustment bolt
2. Using the hex key, move one of the adjusting bolts ¼ turn
counterclockwise to loosen it.
49
Maintenance
If the belt tracks off center ... Then loosen ...
To the left
The right adjusting bolt
To the right
The left adjusting bolt
3. Recheck the belt position as described under Checking the
Alignment of the Running Belt.
Note: If slippage occurs, tighten both adjusting bolts evenly
until it stops. Do not overtighten the belt.
Checking the Alignment of the Running Belt
Proper alignment allows the belt to remain centered and
ensures smooth operation. Realigning the belt takes a few
simple adjustments. If you are unsure about this procedure,
call Precor Customer Support (refer to Obtaining Service).
CAUTION: Take special care when aligning the running belt. Turn
OFF the treadmill while adjusting or working near the rear roller.
Do NOT wear loose clothing or allow your hair to hang loose
during this procedure. Be very careful to keep your fingers and
any other object clear of the belt and rollers, especially in front of
the roller and behind the deck. The treadmill will not stop
immediately if an object becomes caught in the belt or rollers.
To align the running belt:
1. Make sure that the running surface is as level as possible.
If necessary, adjust the rear feet as shown in the
Assembly Guide to level the treadmill.
Note: Adjusting the rear feet cannot compensate for
extremely uneven surfaces. If you cannot make the
running surface level and stable, move the treadmill.
2. Turn the treadmill ON.
3. Standing beside the treadmill (not on it), press GO on the
console.
4. If necessary, enter the safety code by pressing the
number keys in sequence. The running belt starts
automatically after a 3-second countdown appears on the
console.
5. Press the SPEED UP key until the console shows a speed
of 3 mph (5 kph).
CAUTION: If you hear any chafing or the running belt appears
to be getting damaged, stop the running belt immediately by
pressing the red STOP button. Contact Precor Customer
Support.
50
Assembling and Maintaining TRM 800-Series Treadmills
6. Observe the belt from the rear of the treadmill for a few
minutes. The belt should remain centered along the
running bed. If it drifts off center, adjust it. Refer to
Treadmill: Adjusting the Running Belt.
Important: Failure to align the belt may cause the belt to tear
or fray, which is not covered by the Precor Limited Warranty.
7. Press the red STOP button to stop the belt.
8. Turn the treadmill OFF.
Storing the Chest Strap
If you purchased the optional heart rate chest strap, store it in
a place where it remains free of dust and dirt (for example, in
a closet or drawer). Be sure to protect the chest strap from
extremes in temperature. Do not store it in a place that may
be exposed to temperatures below 32° F (0° C).
To clean the chest strap, use a sponge or soft cloth dampened
in mild soap and water. Dry the surface thoroughly with a
clean towel.
Moving the Equipment
The equipment is very heavy. If you plan to move it to a new
location, obtain the help of an adult assistant and use proper
lifting techniques. If the equipment includes roller wheels on
one end, use the wheels to reduce the load on yourself and
your assistant.
Important: The plastic end caps on Precor treadmills are designed
specifically for lifting. Working with your assistant, place a hand
under each side of the end cap. Then, using proper lifting
techniques, lift the rear of the treadmill so that it rolls on its front
wheels.
The treadmill can be easier to move if it is in an inclined
position.
To put the treadmill into an inclined position for moving:
1. Press GO on the console.
2. Increase the incline level to 4 or more.
3. While the treadmill is running, turn the main power
switch OFF.
4. Disconnect the treadmill’s power cord.
51
Maintenance
Long-Term Storage
If you do not expect anyone to use the equipment for a long
time, perform the following tasks to prepare it for storage:




Turn it OFF.
If it has a power cord, disconnect the cord.
If it has an optional power adapter, connect the adapter to
prevent damage to the internal battery.
Position it so that it will not become damaged and will not
interfere with people or other equipment.
52
Assembling and Maintaining TRM 800-Series Treadmills
Chapter
4
Treadmill Safety Features
Before allowing users on Precor equipment, review the
Important Safety Instructions in this manual. You should also
teach your patrons how to use the equipment safely,
according to the guidelines on.
Entering the Safety Code
When the equipment is shipped from the factory, safety code
protection is not active.
After you have activated the safety code, you must inform
your patrons that the equipment requests a safety code to
prevent unauthorized use. They must complete the following
steps to use the equipment.
To enter the safety code and start the treadmill:
1. Assume the starting position, with one hand free to enter
the code and the other hand holding a handrail.
Important: Hold the handrail securely with at least one hand
throughout the following steps.
2. When you see the banner text on the console, select a
program or press GO.
3. When you are prompted to enter the safety code and
unlock the treadmill, press the 1, 2, 3, and 4 keys in order.
If you have entered the code correctly, the workout
begins. Otherwise, the equipment pauses for two seconds
and then prompts you to enter the code again. Pressing
five or more keys returns you to the initial safety code
prompt.
Note: On a treadmill, a 3-second countdown appears on the
console before the running belt starts to move.
54
Assembling and Maintaining TRM 800-Series Treadmills
Using the Treadmill Safety Clip
The treadmill is equipped with two different stop functions,
which behave as follows:
If the user …
Then the
treadmill
belt …
And the console …
Presses down on the red Slows to a
STOP button
stop
Shows that the exercise
workout is paused
Slows to a
Pulls on the lanyard
stop
attached to the safety
clip and trips the restart
switch
Shows the words PUSH TO
RESET SWITCH and an
arrow pointing to the
Restart switch
The restart switch is located just below the console and
immediately behind the red STOP button, as shown in the
following illustration. When it is tripped, the bar pops up,
displaying the words PUSH TO RESET SWITCH on its front
side. The treadmill does not operate while these words are
visible.
Figure 30: Restart switch
Instruct users on how important it is to use the safety clip
while exercising on the treadmill, and demonstrate how they
should attach it to their clothing near the waistline.
Treadmill Safety Features
55
If the restart switch trips during exercise, perform the
following steps:
1. Reattach the safety clip if necessary.
2. Press the restart switch down until it clicks, returning it to
its normal position.
Note: If the restart switch trips, all information about the
current workout is deleted.
3. Start the workout from the beginning, reducing the time
as needed to account for the amount of exercise that has
been completed.
Figure 31: Attaching the safety clip
Turning the Treadmill On and Off
To turn the treadmill ON and OFF, use the power switch
located beneath the hood, near the power cord receptacle.
Important: When the treadmill is not being used, turn it OFF.
Weight Limit
Do not use the treadmill if you weigh more than 500 pounds
(225 kg). If you weigh more than 350 pounds (160 kg), do not
run on the treadmill.
Location
The area around the treadmill must remain open, and free of
interference from objects such as other equipment, at all
times. In addition, for user safety and proper maintenance, an
area three feet (one meter) wide by six feet (two meters) long
must remain open and free of interference directly behind the
running belt.
56
Assembling and Maintaining TRM 800-Series Treadmills
Chapter
5
Commercial Cardiovascular
Equipment Limited Warranty
PLEASE READ THESE WARRANTY TERMS AND CONDITIONS CAREFULLY BEFORE
USING YOUR PRECOR INCORPORATED PRODUCT. BY USING THE EQUIPMENT, YOU
ARE CONSENTING TO BE BOUND BY THE FOLLOWING WARRANTY TERMS AND
CONDITIONS.
Limited Warranty.
Precor Incorporated warrants all new Precor products to be free from defects in materials
and manufacture for the warranty periods set forth below. The warranty periods
commence on the invoice date of the original purchase. This warranty applies only against
defects discovered within the warranty period and extends only to the original purchaser
of the product. Parts repaired or replaced under the terms of this warranty will be
warranted for the remainder of the original warranty period only. To claim under this
warranty, the buyer must notify Precor or your authorized Precor dealer within 30 days
after the date of discovery of any nonconformity and make the affected product available
for inspection by Precor or its service representative. Precor’s obligations under this
warranty are limited as set forth below.
Warranty Periods and Coverage.
All Commercial Cardiovascular Products (excluding StretchTrainer, Strength
Products, and coverage specific to certain models and options as defined
below):





Frame: 7 years
Treadmill drive motor: 5 years
Items subject to wear: 1 year
All other parts (including mechanical parts and electronic parts): 2 years
Labor: 1 year
880 Line Commercial Cardiovascular Products (superseding the coverage
above where applicable):


Labor on the P80 console: 2 years
High wear items on the P80 console, including headphone jack, USB connector, and
iPod® connector: 90 days
58
Assembling and Maintaining TRM 800-Series Treadmills
Options / Accessories
Many options or accessories have components that are connected internally or mounted
inside the electronic console. The following guidelines determine the warranty for these
components. If the internal components are installed by the factory or by an authorized
dealer as part of the original sale and delivery, they have a warranty that is identical to the
warranty of the equipment in which they are connected or mounted. If the internal
components are not installed by the factory or by an authorized dealer as part of the
original sale and delivery, they have a 90 days parts and labor limited warranty. All
components that are not internally connected have a 90 days parts only limited warranty.
Satisfactory proof of purchase is required in all cases.
Conditions and Restrictions.
This warranty is valid only in accordance with the conditions set forth below:
1.
The warranty applies to the Precor product only while
a. it remains in the possession of the original purchaser and proof of purchase is
demonstrated.
b. it has not been subjected to accident, misuse, abuse, improper service, or
non-Precor modification.
c. claims are made within the warranty period.
2. This warranty does not cover damage or equipment failure caused by electrical wiring
not in compliance with electrical codes or Precor owner’s manual specifications, or
failure to provide reasonable and necessary maintenance as outlined in the owner’s
manual.
3. Precor is not responsible for Internet connectivity to its products. This restriction
applies to services, such as those provided by an Internet service provider (ISP), and
also to hardware related to Internet connectivity, such as Ethernet cabling, routers,
servers and switches.
4. Precor is not responsible for the quality of television, video, audio, or other media
supplied to its products. This restriction applies to services, such as those provided
by a cable or satellite television provider; to signal strength and clarity; and also to
hardware related to the reception and delivery of television, video, audio, and other
media. Such hardware can include (but is not limited to) audio, video, and
radio-frequency (RF) cabling, connectors, receivers, modulators, combiners,
distribution amplifiers, splitters, and so on.
5. Precor cannot guarantee that the heart rate measurement system on its products will
work for all users. Heart rate measurement accuracy varies based on a number of
factors, including the user’s physiology and age, the method in which the heart rate
measurement system is used, external interference, and other factors that may
influence heart rate acquisition.
6. Except in Canada, Precor does not pay labor outside the United States.
7. Warranties outside the United States and Canada may vary. Please contact your local
Dealer for details.
Commercial Cardiovascular Equipment Limited Warranty
59
This Limited Warranty shall not apply to:
1. Software version upgrades.
2. Software defects that do not materially and negatively affect the normal performance
of the product under normal conditions of use.
3. Consumable goods or cosmetic items of the product, the exterior of which has been
damaged or defaced as a result of abuse, misuse, accident, improper service or
installation, mishandling, or modification in design or construction not authorized by
Precor.
4. Repairs performed on Precor equipment missing a serial number or with a serial tag
that has been altered or defaced.
5. Service calls to correct installation of the equipment or instruct owners on how to use
the equipment.
6. Pickup and delivery involved with repairs.
7. Any labor costs incurred beyond the applicable labor warranty period.
Disclaimer and Release.
The warranties provided herein are the exclusive warranties given by Precor and
supersede any prior, contrary or additional representations, whether oral or written. ANY
IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE THAT APPLY TO ANY PARTS DESCRIBED
ABOVE ARE LIMITED IN DURATION TO THE PERIODS OF EXPRESS WARRANTIES
GIVEN ABOVE FOR THOSE SAME PARTS. PRECOR HEREBY DISCLAIMS AND
EXCLUDES THOSE WARRANTIES THEREAFTER. Some States do not allow limitations on
how long an implied warranty lasts, so the above limitation may not apply to you. PRECOR
ALSO HEREBY DISCLAIMS AND EXCLUDES ALL OTHER OBLIGATIONS OR LIABILITIES,
EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, WITH RESPECT TO ANY
NONCONFORMANCE OR DEFECT IN ANY PRODUCT, INCLUDING BUT NOT LIMITED
TO: (A) ANY OBLIGATION, LIABILITY, RIGHT, CLAIM OR REMEDY IN TORT, WHETHER
OR NOT ARISING FROM THE NEGLIGENCE OF PRECOR OR ITS SUPPLIERS (WHETHER
ACTIVE, PASSIVE OR IMPUTED); AND (B) ANY OBLIGATION, LIABILITY, RIGHT,
CLAIM OR REMEDY FOR LOSS OF OR DAMAGE TO ANY EQUIPMENT. This disclaimer
and release shall apply even if the express warranty set forth above fails of its essential
purpose.
Exclusive Remedies.
For any product described above that fails to conform to its warranty, Precor will provide,
at their option, one of the following: (1) repair; (2) replacement; or (3) refund of the
purchase price. Precor Limited Warranty service may be obtained by contacting the
authorized dealer from whom you purchased the item. Precor compensates Servicers for
warranty trips within their normal service area to repair commercial equipment at the
customer’s location. You may be charged a trip charge outside the service area. THESE
SHALL BE THE SOLE AND EXCLUSIVE REMEDIES OF THE BUYER FOR ANY BREACH OF
WARRANTY.
60
Assembling and Maintaining TRM 800-Series Treadmills
EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL
DAMAGES.
PRECOR AND/OR ITS SUPPLIERS SHALL HAVE NO OBLIGATION OR LIABILITY,
WHETHER ARISING IN CONTRACT (INCLUDING WARRANTY), TORT (INCLUDING
ACTIVE, PASSIVE, OR IMPUTED NEGLIGENCE AND STRICT LIABILITY), OR
OTHERWISE, FOR DAMAGE TO THE EQUIPMENT, PROPERTY DAMAGE, LOSS OF USE,
REVENUE OR PROFIT, COST OF CAPITAL, COST OF SUBSTITUTE EQUIPMENT,
ADDITIONAL COSTS INCURRED BY BUYER (BY WAY OF CORRECTION OR
OTHERWISE) OR ANY OTHER INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL
DAMAGES, WHETHER RESULTING FROM NONDELIVERY OR FROM THE USE, MISUSE
OR INABILITY TO USE THE PRODUCT. This exclusion applies even if the above warranty
fails of its essential purposes and regardless of whether such damages are sought for
breach of warranty, breach of contract, negligence, or strict liability in tort or under any
other legal theory. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which
vary from state to state.
Complete this portion and keep for your records.
Purchased From:
Example: Dealer or store name.
Phone Number:
Example: Dealer or store telephone number.
Product/model:
Example: AMT 885 or EFX 883.
Serial number:
The serial number is found on the shipping container.
Effective 1 November 2010
P/N 36286-114
Assembling and Maintaining
TRM 800-Series Treadmills
Precor Incorporated
20031 142nd Avenue NE
P.O. Box 7202
Woodinville, WA USA 98072-4002
TRM 800-Series PAG/OM 300713-341 rev G
Warranty #36286-114
14 February 2011
Download PDF
Similar pages