Cordless Systems
Cordless Systems
Cordless
Systems
Hilti. Outperform. Outlast.
47
Cordless Systems
Introduction
Introduction
Page 49-50
Drill drivers
Cordless compact drill driver SFC 22-A
Page 51
Cordless hammer drill driver SFH 22-A
Accessories for drill drivers
Page 52
Page 55
Impact screwdrivers
48
Cordless impact wrench SIW 22-A
Page 53
Cordless impact wrench SIW 22T-A
Page 54
Accessories for impact screwdrivers
Page 55
Cordless Systems
Complete mobility - Hilti cordless drills and
drivers.
With power you can rely on.
More work per charge or less weight.
Cordless
Systems
Hilti Lithium CPC gives you the choice.– The capacity of a Hilti battery is
matched to the tool’s intended use. You thus always have a choice between
batteries that provide more lasting power and those that save weight.
One charger for all voltages.
They’re simply unrivalled – only Hilti offers all-in-one chargers for 22 and
36 volt Li-ion batteries. The Hilti C 4/36-350 is a prime example. Its active
cooling system prevents overheating and allows uniquely short charging cycles.
More power
Lithium-ion cells incorporating the
latest technology provide unequalled
power and capacity. Four LEDs
keep you informed about the Hilti
CPC battery’s state of charge.
Higher reliability
Electronic battery management and
motor control for extra-long lifetime.
Rubberized, impact-resistant, fiberglass-reinforced casings make the tools
and batteries exceptionally rugged.
Air-cooled charging.
All rechargeable batteries get warm when charging, but overheating can result in
damage. The charging procedure is thus a constant stop-and-go. The charger
must repeatedly give the battery time to cool down. Hilti ACS chargers, however,
like the C 4/36-350 shown here, draw cool, fresh air through
the battery while charging is in progress. This allows
uniquely short charging cycles.
Better services
All Hilti Lithium CPC tools, chargers
and batteries come with Hilti Lifetime
Service – this means no costs to
you for up to two years from date
of purchase in the event of a fault.
49
Cordless Systems
Cordless drilling and driving with
Hilti.
One charger for all voltages.
22 Volt
SFC 22-A
compact drill / driver
36 Volt
TE 6-A36
rotary hammer
50
SFH 22-A
hammer drill / driver
SIW 22-A
impact wrench
SIW 22T-A
impact wrench
TE 2-A22
rotary hammer
Cordless Systems
Applications
Technical data
ʰ
ʰ
Hole sawing in diameters up to 82 mm
Driving screws up to 8 mm dia. in wood
Voltage
22 V
ʰ
ʰ
ʰ
Driving screws up to 4.8 mm dia. in steel
Drilling in steel with bits up to 10 mm diameter
Drilling in metal up to 12 mm dia. in metal
Battery capacity
3.3 Ah
Tool chuck type
3-jaw chuck, 1.5 - 13 mm
Max. torque hard joint
55 Nm
Max. torque (soft joint)
28 Nm
Advantages
Torque range (adjustable)
2 - 10 Nm
ʰ
ʰ
ʰ
Dimensions (LxWxH)
202 x 92 x 234 mm
Weight according to EPTA
Procedure 01/2003
Chuck functionality
1.7 kg
ʰ
ʰ
ʰ
Lightweight and compact
Ergonomically designed grip for maximum working comfort
High performance motor, delivers surprising amount of
performance
Ultimate drilling and screwdriving with speeds up to 1,800 /min.
Perfect illumination of the work area thanks to built-in LED lamp
Very compact and rugged Hilti Lithium CPC battery for high
performance and long life
Cordless
Systems
Cordless compact drill driver SFC 22-A
Keyless
69 dB (A)
A-weighted emission sound
pressure level acc. to EN 60745
Yes
Adjustable torque
Ordering designation
Package contents
Sales pack
quantity
SFC 22-A cas
1x Cordless compact drill driver SFC 22-A, 1x Case
1
Item number
2006480
51
Cordless Systems
Cordless hammer drill driver SFH 22-A
Applications
Technical data
ʰ
Hammer drilling in diameters up to 14 mm dia. in brick, masonry,
sand-lime block and aerated concrete
Driving heavy-gauge wood screws
Voltage
22 V
Battery capacity
3.3 Ah
Cutting recesses and through-holes with hole saws up to 125
mm dia.
Drilling with high torque and speed in diameters up to 13 mm in
metal
Driving self-drilling screws up to 4.8 mm dia. in metal at high
speed (3rd gear)
Tool chuck type
3-jaw chuck, 1.5 - 13 mm
Full hammering frequency
39000 impacts/minute
Max. torque hard joint
84 Nm
Max. torque (soft joint)
50 Nm
Torque range (adjustable)
2 - 12 Nm
Dimensions (LxWxH)
265 x 92 x 244 mm
Weight according to EPTA
Procedure 01/2003
Chuck functionality
2.6 kg
ʰ
ʰ
ʰ
ʰ
Advantages
ʰ
ʰ
ʰ
ʰ
ʰ
ʰ
Unbeaten performance and battery capacity in the 22 volt class
Best performance-to-size ratio
Extremely durable 3-speed all-metal gearing for high torque
Top speed of 2,200 rpm for fast drilling in steel and unbeaten
hammer drilling speed in 3rd gear
Accurate charge status display
Extremely tough and impact-resistant, glass-fiber-reinforced tool
and battery casings
Keyless
Ordering designation
Package contents
Sales pack
quantity
SFH 22-A cas
1x Cordless hammer drill driver SFH 22-A, 1x Case
1
52
Item number
290211
Cordless Systems
Cordless impact wrench SIW 22-A
Technical data
ʰ
ʰ
Voltage
22 V
Battery capacity
3.3 Ah
Tool chuck type
1/2 in square
Full hammering frequency
3500 impacts/minute
Rotation speed (setting)
1000 rpm (1); 1500 rpm (2); 2300
rpm (3);
Dimensions (LxWxH)
154 x 94 x 228 mm
ʰ
ʰ
Driving 6 mm and 8 mm HUS screw anchors in concrete
Driving HRD frame anchors 8 mm to 10 mm diameter in masonry and concrete
Setting HSA stud anchors in the sizes M8 to M12 with the S-TB
torque bar
Tightening and releasing nuts and bolts in the sizes M6 to M16
Advantages
ʰ
ʰ
ʰ
ʰ
ʰ
ʰ
Brushless motor for long lifetime and more work per charge
Compact design allows easy use in tight corners and wherever
space is limited
3 gears and electronic speed control for easy switching between
different driving speeds
4 LEDs around the chuck illuminate the work surface for a good
view of the task at hand
Electronic speed control and motor brake for precise starting
and stopping
Very compact and rugged Hilti Lithium CPC battery for high
performance and long life
Cordless
Systems
Applications
1.5 kg
Weight according to EPTA
Procedure 01/2003
86 dB (A)
A-weighted emission sound
pressure level acc. to EN 60745
Brushless motor
Yes
Ordering designation
Package contents
Sales pack
quantity
SIW 22-A 1/2”
1x Cordless impact wrench SIW 22-A 1/2”, 1x Case
1
Item number
2006081
53
Cordless Systems
Cordless impact wrench SIW 22T-A
Applications
Technical data
ʰ
Voltage
22 V
Battery Capacity
3.3 Ah
Tool chuck type
1/2 in square
Full hammering frequency
2500 impacts/minute
Rotation speed (setting)
2000 rpm (1);
Dimensions (LxWxH)
232 x 94 x 258 mm
Weight according to EPTA
Procedure 01/2003
3 kg
ʰ
ʰ
ʰ
Driving HUS screw anchors from 8 mm to14 mm in diameter in
concrete
Tightening and releasing nuts and bolts from M12 to M24
Assembling steel profiles, timber or pre-cast concrete
components
Driving HRD frame anchors from 10 mm to 14 mm in masonry
and concrete
Advantages
ʰ
ʰ
ʰ
ʰ
ʰ
ʰ
Compact design with excellent balance for precise handling
½” square drive with heavy-duty ball-notch retention for security
and quick socket changing
Full range of bolt, anchor and screw fasteners available
Rubber cap for comfortable handling and protection of the work
surface
No kick-back thanks to tangential impact: much less tiring to
use
Optimized as a system for driving Hilti HUS and HRD screw
anchors
95.5 dB (A)
A-weighted emission sound
pressure level acc. to EN 60745
Ordering designation
Package contents
Sales pack
quantity
SIW 22T-A
1x Cordless impact wrench SIW 22T-A, 1 x Case
1
54
Item number
409459
Cordless Systems
SW 22T-A
Ordering designation
Sales pack
quantity
Item number
Battery charger C 4/36-350 230V box
„
„
„
„
1
2028876
Battery pack B 22/3.3 Li-Ion
„
„
„
„
1
2007431
55
Cordless
Systems
SW 22-A
SFH 22-A
SFC 22-A
Accessories for Drills, Impact Drivers and Wrenches
Download PDF
Similar pages