DPM-USB
ORTEC Dual-Port Memory to USB Converter
• Save Your Investment – Convert these ORTEC MCA’s to USB:
919
919E
920-8
920-16
920E
921
921E
926
92X
92X-II
DSPec
92X-P (NOMAD)
NOMAD-Plus
OCTETE-PC
• Simple Install – Connect the cable and
update the drivers!
• No external cable required – powered
from the USB.
• USB 2.0 Compatible.
Since the inception of the personal computer, ORTEC has provided MCBs which couple to the PC via a flat ribbon cable to an ISA card in the computer. The ISA
(Industry Standard Architecture) Bus is now almost completely extinct. Today’s modern PCs often do not have option slots of any type, but all have USB ports. An
enhancement to the CONNECTIONS product family, the DPM-USB interface provides a means to convert the ORTEC Dual-Port Memory (DPM) communication to
USB.
For ORTEC MCA owners the conversion from the ORTEC DPM to USB preserves their hardware investment and allows PC upgrades. The model
DPM-UPGRADE-USB includes the hardware for the USB connection and the driver update for the software. The upgrade provided with the model
DPM-UPGRADE-USB will also update drivers for any user-developed programs written using the CONNECTIONS Programmer’s Toolkit (Model A11-BW). Of course
updating the MAESTRO, GammaVision, ScintiVision, or AlphaVision software would be advisable to take full advantage of all the features of the latest ORTEC
analysis products.
The model DPM-USB connects directly to the 37-pin
D-connector on the rear panel of ORTEC MCA hardware (NIM
and non-NIM) and to the USB port of a PC. The Model
DPM-USB is fully compatible with USB 2.0 and operates at a
maximum data transfer rate of 12-Mb/second.
Multiple USB connections to a single PC can be achieved by
use of a powered USB hub. ORTEC offers two models of
powered USB hubs (see Accessories). Up to eight MCB units
can be connected to a single PC in this manner.
The DPM-USB interface converter adapts any of the below
listed ORTEC MCB instruments to a PC with an available
USB port. Installing the model DPM-USB is accomplished by
simply plugging in the connectors. Be sure to install the
software and any upgrades before connecting this interface.
Compatible ORTEC models:
919
920E
919E
921
920-16
926
920-8
921E
92X
92X-P (NOMAD)
DSPec
OCTETE-PC
92X-II
NOMAD-Plus
DPM-USB
ORTEC Dual-Port Memory to USB Converter
Example:
For remote operation, ORTEC offers the model USB-CONC-110 or model USB-CONC-220. These units will interface USB connections to the Ethernet using TCPIP
protocols. The USB-CONC-110 or USB-CONC-220 provides connections for up to 5-each USB devices.
Specifications
Input/Output: Female 37-pin D-connector with captive 5 meter (15-ft.) USB cable.
Power Required: Provided by the USB connection.
Dimensions: 2.75-in. (7-cm) W, 2.75-in. (7-cm) D, and 0.75-in (1.9-cm) H 37-pin D-connector with captive 5-m USB cable.
Net Weight: 1-lb. (0.45-kg), shipping weight 5-lb. (2.27-kg).
Ordering Information
Model
DPM-USB
DPM-UPGRADE-USB
DPM-M32-USB
Accessories
C-USB-HUB-4B
C-USB-HUB-7B
USB-CONC-110
USB-CONC-220
Description
Dual-Port Memory to USB Interface Converter
DPM-USB and CONNECTIONS Driver Update
DPM-USB with MAESTRO software
4-port powered USB hub
7-port powered USB hub
5-port USB to Ethernet converter – 110V/60Hz
5-port USB to Ethernet converter – 220V/50Hz
Specifications subject to change
072617
Download PDF
Similar pages