NUMBER : RD-SD SDLU1S041C(LB)
DATE : 2017/01/20 (REV:A4)
Single 10/100 BASE-TX Filtered Connector Module
MODEL NO. : RJ-209TA
FEATURE :
◎ RoHS Compliant
◎ Fully shielded magnetics protect data from internally generated digital noise
◎ Reduces the overall length of the signal path for improved common mode performance
◎ Implements full common mode termination scheme with used and unused twisted
◎
◎
◎
pairs
Meets IEEE802.3 Baseline Wander Compensation specification
Integrates high voltage capacitor to chassis ground
Supports all major transceivers with matched turns ration and complete integration of
specified termination
Design for 100base-tx transmission over UTP-5 cable
Operating TEMP. range:-40℃ to +85℃
Storage TEMP. range:-55℃ to +125℃
Primary OCL inductance: 350μH MIN. at 100KHz/0.1Vrms 8mA DC bias
◎
◎
◎
◎
SPECIFICATIONS:
Typical Performance Characteristics@ 25℃
Insertion Loss
MHz
(dB MAX)
1~100
-1.0
SCHEMATIC:
Return Loss
MHz
(dB Min )
1~30
-16
40
-14
50 60~80
-12
-10
Differential to
Common
Mode Rejection
MHz (dB MIN)
1~100
-33
Cross talk
MHz
(dB MIN)
CMRR
MHz
(dB MIN)
Isolation
Voltage
(Vrms min)
1~100
-33
1~100
-30
1500
NUMBER : RD-SD SDLU1S041C(LB)
DATE : 2017/01/20 (REV:A4)
MODEL NO. : RJ-209TA
DIMENSION & MARKING: mm;TOLERANCE: ±0.15 (unless otherwise specified)
PCB LAYOUT:
NUMBER : RD-SD SDLU1S041C(LB)
DATE : 2017/01/20 (REV:A4)
MODEL NO. : RJ-209TA
MATERIAL REQUIREMENTS:
1.
2.
Design and Construction
Product shall be of design, construction and physical dimensions specified on
applicable product drawing.
Materials and Finish
A. Contact:
RJ Contact : Phosphor Bronze, Thickness=0.30mm
Finish : Contact Area : 30μ”min. Gold over 50μ”min. Nickel
RJ Joint Contact : SPCC , Thickness=0.3mm
Finish : 80μ”min. Sn over 50μ”min. Nickel
B. Plastic Part :
(1) Set Housing : Thermoplastic, LCP, Black
UL FILE NO. : E106764
Manufacturer : POLYPLASTICS CO LTD.
Grade : E130i(d)(e)
Flame Class : UL 94V-0
(2) Insert : Thermoplastic, LCP, Black
UL FILE NO. : E106764
Manufacturer : POLYPLASTICS CO LTD.
Grade : E130i(d)(e)
Flame Class : UL 94V-0
(3) Spacer : Thermoplastic, LCP, Black
UL FILE NO. : E106764
Manufacturer : POLYPLASTICS CO LTD.
Grade : E130i(d)(e)
Flame Class : UL 94V-0
C. Shield Material :
Cartridge t=0.25mm
10μ”-20μ” Thick Nickel over Brass.
Durability :
(1)1000 cycles with no function damage for RJ-45 . Abnormalities shall be
present after the test.
(2)Low Level Contact Resistance : ∆R=30mΩ maximum (final)
(3)The sample should be mounted in the tester and fully mated and unmated
500 times per hour at the rate of 25mm/min.EIA-364-09C.
NUMBER : RD-SD SDLU1S041C(LB)
DATE : 2017/01/20 (REV:A4)
MODEL NO. : RJ-209TA
RJ PLUG SPECIFICATION :
NUMBER : RD-SD SDLU1S041C(LB)
DATE : 2017/01/20 (REV:A4)
MODEL NO. : RJ-209TA
PACKING:
1.
2.
3.
4.
Unit weight :5.7 grams
package : 64 pcs / tray / 0.4048 kgms
Carton : 640 pcs / 10 layers of tray
Gross weight : 6.17 kgms
NUMBER : RD-SD SDLU1S041C(LB)
DATE : 2017/01/20 (REV:A4)
MODEL NO. : RJ-209TA
ORDER INFORMATION:
Download PDF
Similar pages